Nikon | COOLPIX W150 | Nikon COOLPIX W150 Reference Manual (complete instructions)

Nikon COOLPIX W150 Reference Manual (complete instructions)
DIGITAL CAMERA
Reference Manual
Read this manual thoroughly before using the camera.
To ensure proper use of the camera, be sure to read “ For
your safety (page 11)” and “ <Important> Notes about
shockproof, waterproof, and dustproof performance and
condensation (page 15)”.
• After reading this manual, keep it in a readily accessible
place for future reference.
•
•
Types of manuals
The following manuals are available for this camera.
Manual
Description
Reference Manual
(this manual)
Explains details about using the camera.
Online Manual
You can view the Reference Manual content online.
https://onlinemanual.nikonimglib.com/w150/en/
SnapBridge Online
Help
Explains details about using the app for smart devices,
“SnapBridge”.
https://nikonimglib.com/snbr/onlinehelp/en/index.html
Quick Start Guide
A manual included with the camera.
Explains preparation for shooting and basic operations.
2
Table of contents
Introduction..............................................................................................................................7
Read this first........................................................................................................................................ 8
For your safety................................................................................................................................... 11
<Important> Notes about shockproof, waterproof, and dustproof performance
and condensation............................................................................................................................ 15
Parts of the camera..............................................................................................................20
The camera body..............................................................................................................................21
Screen indicators.............................................................................................................................. 24
Using the flexible buttons.............................................................................................................28
The power-on lamp......................................................................................................................... 30
Getting started......................................................................................................................31
Attaching the strap..........................................................................................................................32
Inserting the battery and memory card...................................................................................33
Charging the battery.......................................................................................................................36
Camera setup.....................................................................................................................................38
Basic shooting and playback operations.....................................................................41
Shooting images...............................................................................................................................42
Playing back images........................................................................................................................45
Deleting images................................................................................................................................46
Shooting features.................................................................................................................48
Shooting menu list...........................................................................................................................49
Point and shoot.................................................................................................................................50
Flash...................................................................................................................................................... 52
Self-timer............................................................................................................................................. 53
Smile timer..........................................................................................................................................55
Choose a style....................................................................................................................................57
Shoot night scenes ........................................................................................................................................58
Shoot close-ups ...............................................................................................................................................58
Photograph food ............................................................................................................................................ 59
Shoot under water .........................................................................................................................................59
Underwater face framing .......................................................................................................................... 60
Shoot at intervals ............................................................................................................................................61
Take a series of pictures ..............................................................................................................................62
3
Table of contents
Photograph fireworks .................................................................................................................................. 63
Shoot backlit scenes .....................................................................................................................................63
Mirror ......................................................................................................................................................................64
Add a bubble effect ......................................................................................................................................64
Add a neon effect .......................................................................................................................................... 65
Add a cartoon effect .....................................................................................................................................66
Take soft pictures ............................................................................................................................................66
Create a diorama effect .............................................................................................................................. 66
Shoot a movie miniature ........................................................................................................................... 67
Add light trails .................................................................................................................................................. 68
Picture-in-picture ............................................................................................................................................69
Decorate.............................................................................................................................................. 71
Change colors....................................................................................................................................72
Change sounds................................................................................................................................. 73
Choose a size......................................................................................................................................74
Using the zoom................................................................................................................................. 76
Focusing...............................................................................................................................................77
Default settings list for flash and self-timer............................................................................ 80
Functions that cannot be used simultaneously when shooting.....................................81
Playback features................................................................................................................. 83
Playback zoom.................................................................................................................................. 84
Crop.......................................................................................................................................................85
Thumbnail playback........................................................................................................................86
Playback menu list........................................................................................................................... 87
Exchange messages........................................................................................................................ 89
Picture play......................................................................................................................................... 92
Add makeup ......................................................................................................................................................92
Arrange pictures ............................................................................................................................................. 94
Add a fisheye effect ...................................................................................................................................... 95
Toy camera ......................................................................................................................................................... 95
Soften pictures .................................................................................................................................................96
Add starbursts .................................................................................................................................................. 96
Add a diorama effect ................................................................................................................................... 96
Change colors ...................................................................................................................................................97
Highlight colors ...............................................................................................................................................97
Decorate ...............................................................................................................................................................98
Add cartoon effects ...................................................................................................................................... 98
Stamp .....................................................................................................................................................................99
Add clarity under water ...........................................................................................................................102
Add a "little planet" effect ...................................................................................................................... 102
Curve pictures ................................................................................................................................................103
4
Table of contents
Grading..............................................................................................................................................104
Favorites............................................................................................................................................ 108
View by date.................................................................................................................................... 111
Slide show.........................................................................................................................................112
Mark for upload.............................................................................................................................. 117
Retouch............................................................................................................................................. 119
Movies....................................................................................................................................122
Recording and playing back movies.......................................................................................123
Operations during movie playback.........................................................................................126
General camera setup......................................................................................................127
Using the camera settings menu............................................................................................. 128
Network menu................................................................................................................................ 130
Welcome screen............................................................................................................................. 134
Date and time..................................................................................................................................135
Variety menu................................................................................................................................... 136
Brightness.........................................................................................................................................137
Date stamp....................................................................................................................................... 138
Electronic VR....................................................................................................................................139
AF assist............................................................................................................................................. 140
Format card...................................................................................................................................... 141
Format memory..............................................................................................................................142
Language.......................................................................................................................................... 143
Image comment.............................................................................................................................144
Copyright information................................................................................................................. 145
Location data display................................................................................................................... 146
Menu background......................................................................................................................... 147
Charge by computer.....................................................................................................................148
Reset all..............................................................................................................................................149
Conformity marking......................................................................................................................150
Firmware version............................................................................................................................151
Connecting the camera to a TV, printer, or computer..........................................152
Viewing images on a TV.............................................................................................................. 153
Printing images with a printer...................................................................................................155
Transferring images to a computer......................................................................................... 160
Connecting to a smart device (SnapBridge)............................................................164
The SnapBridge app......................................................................................................................165
Connecting the camera and a smart device........................................................................ 167
5
Table of contents
If the camera cannot be connected or images cannot be uploaded..........................173
If there is a problem..........................................................................................................174
Troubleshooting.............................................................................................................................175
Error messages................................................................................................................................185
Technical notes...................................................................................................................189
Notes about wireless communication functions................................................................190
Caring for the product................................................................................................................. 191
Cleaning and storage................................................................................................................... 195
File names.........................................................................................................................................197
Accessories....................................................................................................................................... 198
Specifications.................................................................................................................................. 199
Trademarks.......................................................................................................................................204
Index...................................................................................................................................................206
6
Table of contents
Introduction
Read this first.............................................................................................................................8
For your safety........................................................................................................................11
<Important> Notes about shockproof, waterproof, and dustproof
performance and condensation......................................................................................15
7
Introduction
Read this first
Symbols and conventions
• Symbols
Symbol
Description
This icon marks cautions and information that should be read before
using the camera.
This icon marks notes and information that should be read before
using the camera.
This icon marks other pages containing relevant information.
• SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this
manual.
• Smartphones and tablets are referred to as “smart devices.”
• The setting at the time of purchase is referred to as the “default setting.”
• The names of menu items displayed on the camera screen, and the names of
buttons or messages displayed on a computer screen are enclosed in [ ]
(brackets).
• Images are sometimes omitted from screen display samples so that screen
indicators can be more clearly shown.
Information and precautions
Life-long learning
As part of Nikon’s “Life-long learning” commitment to ongoing product support and
education, continually updated information is available online at the following
websites:
• For users in the U.S.A.: https://www.nikonusa.com/
• For users in Europe: https://www.europe-nikon.com/support/
• For users in Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/
Visit these websites to keep up-to-date with the latest product information, tips,
answers to frequently asked questions (FAQs), and general advice on digital imaging
and photography. Additional information may be available from the Nikon
representative in your area. Visit the website below for contact information.
https://imaging.nikon.com/
8
Introduction
Read this first
● Before taking important pictures
Before taking pictures on important occasions (such as at weddings or before taking
the camera on a trip), take a test shot to ensure that the camera is functioning
normally. Nikon will not be held liable for damages or lost profits that may result from
product malfunction.
● Use only Nikon brand electronic accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including battery
chargers, batteries, Charging AC Adapters, AC adapters, and USB cables) certified by
Nikon specifically for use with this Nikon digital camera are engineered and proven to
operate within the operational and safety requirements of this electronic circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA
AND MAY VOID YOUR NIKON WARRANTY.
A holographic seal that indicates an accessory as an authentic Nikon product is
affixed to the dedicated rechargeable Li-ion battery.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon
holographic seal could interfere with normal operation of the camera or result in the
batteries overheating, igniting, rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized
Nikon dealer.
● About the manuals
• No part of the manuals included with this product may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form, by any means, without Nikon’s prior written permission.
• Illustrations and screen content shown in this manual may differ from the actual
product.
• Nikon reserves the right to change the specifications of the hardware and software
described in these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this
product.
• While every effort was made to ensure that the information in these manuals is
accurate and complete, we would appreciate it were you to bring any errors or
omissions to the attention of the Nikon representative in your area (address
provided separately).
● Comply with copyright notices
Under copyright law, photographs or recordings of copyrighted works made with the
camera can not be used without the permission of the copyright holder. Exceptions
9
Introduction
Read this first
apply to personal use, but note that even personal use may be restricted in the case
of photographs or recordings of exhibits or live performances.
● Disposing of data storage devices
Please note that deleting images or formatting data storage devices such as memory
cards or built-in camera memory does not completely erase the original image data.
Deleted files can sometimes be recovered from discarded storage devices using
commercially available software, potentially resulting in the malicious use of personal
image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person,
make sure to reset all of the camera’s settings using the camera settings menu
[Reset all]. After resetting, erase all data in the device using commercial deletion
software, or format the device using the camera settings menu [Format
memory] or [Format card], then completely refill it with images containing no
private information (for example, images of empty sky). Also replace the image in the
camera settings menu [Welcome screen] [On: Photo] with another image in
the same manner before discarding or transferring. Care should be taken to avoid
injury or damage to property when physically destroying memory cards.
● Conformity marking
Follow the procedure below to display some of the conformity markings that the
camera complies with.
Camera
Enter shooting mode or playback mode flexible button 4 ( )
settings
Conformity marking
10
Introduction
Read this first
For your safety
To prevent damage to property or injury to yourself or to others, read “For your
safety” in its entirety before using this product.
Keep these safety instructions where all those who use this product will read them.
DANGER
Failure to observe the precautions
marked with this icon carries a high
risk of death or severe injury.
WARNING
Failure to observe the precautions
marked with this icon could result in
death or severe injury.
CAUTION
Failure to observe the precautions
marked with this icon could result in
injury or property damage.
WARNING
• Do not use while walking or operating a vehicle. Failure to observe this
precaution could result in accidents or other injury.
• Do not disassemble or modify this product. Do not touch internal parts
that become exposed as the result of a fall or other accident. Failure to
observe these precautions could result in electric shock or other injury.
• Should you notice any abnormalities such as the product producing
smoke, heat, or unusual odors, immediately disconnect the battery or
power source. Continued operation could result in fire, burns or other injury.
• Do not handle the plug with wet hands. Failure to observe this precaution
could result in fire or electric shock.
• Do not let your skin remain in prolonged contact with this product while it
is on or plugged in. Failure to observe this precaution could result in lowtemperature burns.
11
Introduction
For your safety
• Do not use this product in the presence of flammable dust or gas such as
propane, gasoline or aerosols. Failure to observe this precaution could result in
explosion or fire.
• Do not aim the flash at the operator of a motor vehicle. Failure to observe
this precaution could result in accidents.
• Keep this product out of reach of children. Failure to observe this precaution
could result in injury or product malfunction. In addition, note that small parts
constitute a choking hazard. Should a child swallow any part of this product, seek
immediate medical attention.
• Do not entangle, wrap or twist the straps around your neck. Failure to
observe this precaution could result in accidents.
• Do not use batteries, chargers, AC adapters, or USB cables not specifically
designated for use with this product. When using batteries, chargers, AC
adapters, and USB cables designated for use with this product, do not:
- Damage, modify, forcibly tug or bend the cords or cables, place them
under heavy objects, or expose them to heat or flame.
- Use travel converters or adapters designed to convert from one voltage
to another or with DC-to-AC inverters.
Failure to observe these precautions could result in fire or electric shock.
• Do not handle the plug when charging the product or using the AC
adapter during thunderstorms. Failure to observe this precaution could result
in electric shock.
• Do not handle with bare hands in locations exposed to extremely high or
low temperatures. Failure to observe this precaution could result in burns or
frostbite.
CAUTION
• Do not leave the lens pointed at the sun or other strong light sources. Light
focused by the lens could cause fire or damage to product’s internal parts. When
shooting backlit subjects, keep the sun well out of the frame.
• Turn this product off when its use is prohibited. Disable wireless features
when the use of wireless equipment is prohibited. The radio-frequency
emissions produced by this product could interfere with equipment onboard
aircraft or in hospitals or other medical facilities.
12
Introduction
For your safety
• Remove the battery and disconnect the AC adapter if this product will not
be used for an extended period. Failure to observe this precaution could result
in fire or product malfunction.
• Do not fire the flash in contact with or in close proximity to the skin or
objects. Failure to observe this precaution could result in burns or fire.
• Do not leave the product where it will be exposed to extremely high
temperatures, for an extended period such as in an enclosed automobile
or in direct sunlight. Failure to observe this precaution could result in fire or
product malfunction.
• Do not transport the camera with a tripod or similar accessory attached.
Failure to observe this precaution could result in injury or product malfunction.
DANGER for batteries
• Do not mishandle batteries. Failure to observe the following precautions could
result in the batteries leaking, overheating, rupturing, or catching fire:
-
Use only rechargeable batteries approved for use in this product.
Do not expose batteries to flame or excessive heat.
Do not disassemble.
Do not short-circuit the terminals by touching them to necklaces, hairpins, or
other metal objects.
- Do not expose batteries or the products in which they are inserted to powerful
physical shocks.
• Charge only as indicated. Failure to observe this precaution could result in the
batteries leaking, overheating, rupturing, or catching fire.
• If battery liquid comes into contact with the eyes, rinse with plenty of
clean water and seek immediate medical attention. Delaying action could
result in eye injuries.
WARNING for batteries
• Keep batteries out of reach of children. Should a child swallow a battery, seek
immediate medical attention.
13
Introduction
For your safety
• Do not immerse batteries in water or expose to rain. Failure to observe this
precaution could result in fire or product malfunction. Immediately dry the
product with a towel or similar object should it become wet.
• Discontinue use immediately should you notice any changes in the
batteries, such as discoloration or deformation. Cease charging EN-EL19
rechargeable batteries if they do not charge in the specified period of
time. Failure to observe these precautions could result in the batteries leaking,
overheating, rupturing, or catching fire.
• When batteries are no longer needed, insulate the terminals with tape.
Overheating, rupture, or fire may result should metal objects come into contact
with the terminals.
• If battery liquid comes into contact with a person’s skin or clothing,
immediately rinse the affected area with plenty of clean water. Failure to
observe this precaution could result in skin irritation.
14
Introduction
For your safety
<Important> Notes about shockproof,
waterproof, and dustproof performance and
condensation
• The shockproof, waterproof, and dustproof performance described here do not
guarantee that the camera will remain completely waterproof or free from damage
and trouble under all conditions.
• Do not subject the camera to excessive shock, vibration or pressure by dropping it,
hitting it, or placing a heavy object on it. Failure to observe this precaution could
deform the camera, cause water to seep inside, or damage the airtight seals,
resulting in camera malfunction.
• Your Nikon warranty may not cover troubles caused by water seeping inside the
camera due to improper handling of the camera.
Notes about shockproof performance
This camera has passed Nikon’s in-house test (drop test from a height of 180 cm (5 ft
10 in.) on a 5 cm (2 in.) thick plywood panel) compliant with the MIL-STD-810G w/
Change 1 Method 516.7-Shock* standard.
Changes in appearance, such as paint peeling off and deformation of the camera, are
not measured in Nikon’s in-house test.
* U.S. Department of Defense test method standard. This test is defined by preparing 5
cameras and making sure that the test is passed within 5 cameras by dropping in 26
directions (8 corners, 12 edges, and 6 faces) from a height of 122 cm (4 ft).
Notes about waterproof and dustproof performance
The camera is rated equivalent to JIS/IEC waterproof class 8 (IPX8) and JIS/IEC
dustproof class 6 (IP6X) and can shoot images underwater at a depth of 10 m (33 ft)
for up to 60 minutes.*
* This rating indicates that the camera has been designed to withstand the specified water
pressure for the specified period of time when the camera is used according to the
methods defined by Nikon.
• The waterproof performance of this camera was tested in fresh water (swimming
pools, rivers, and lakes) and salt water only.
• The inner portion of this camera is not waterproof. Water seeping inside the
camera could cause the components to rust, resulting in high repair costs or
irreparable damage.
• Accessories are not waterproof.
15
Introduction
<Important> Notes about shockproof, waterproof, and dustproof
performance and condensation
Precautions when cleaning
• Do not puncture the microphone or speaker openings with a sharp implement. If the
inside of the camera is damaged, the waterproof performance will deteriorate.
• Do not use soap, neutral detergents, or chemicals such as benzene.
Notes about shockproof, waterproof, and dustproof
performance
• Do not drop the camera, strike it against a hard object such as a rock, or throw it
against a water surface.
• Do not subject the camera to shock when using it underwater.
- Do not subject the camera to water pressure by exposing it to rapids or
waterfalls.
- Do not expose to depths greater than 10 m (33 ft) underwater.
- Make sure not to drop the camera underwater. This camera does not float in
water.
• Do not continuously use the camera underwater for 60 minutes or more.
• Do not insert a wet memory card or battery in the camera.
- Do not open the battery-chamber/memory card slot cover when the camera or
your hands are wet. Doing so may cause water to seep inside the camera or
result in camera malfunction.
• Do not open the battery-chamber/memory card slot cover underwater.
16
Introduction
<Important> Notes about shockproof, waterproof, and dustproof
performance and condensation
• If moisture such as water droplets adheres to the outside of the camera or inside of
the battery-chamber/memory card slot cover, immediately wipe it off with a soft
dry cloth.
- If a foreign substance adheres to the outside of the camera or inside of the
battery-chamber/memory card slot cover, immediately remove it with a blower
or a soft cloth.
- If a foreign substance adheres to the waterproof packing (1) inside the batterychamber/memory card slot cover, remove it with the included brush. Do not
use the included brush for anything other than cleaning the waterproof
packing.
• Do not leave the camera in cold conditions or in hot conditions of 40°C (104°F) or
more for a long period of time.
- Doing so could cause deterioration of the waterproof performance.
- When using the camera underwater, make sure the water temperature is from
0°C to 40°C (32°F to 104°F).
• Do not use the camera at hot springs.
Before using the camera underwater
Check the items below before using the camera underwater.
• Make sure that there are no foreign substances inside the battery-chamber/
memory card slot cover.
• Make sure that the waterproof packing of the battery-chamber/memory card slot
cover is not cracked or deformed.
- Make sure that the waterproof packing is not detached from the camera.
17
Introduction
<Important> Notes about shockproof, waterproof, and dustproof
performance and condensation
• Make sure that the battery-chamber/memory card slot cover is firmly closed.
- Slide the cover until it locks in place with a click.
Notes about operating temperature, humidity, and
condensation
The operation of this camera has been tested at temperatures from –10°C to +40°C
(14°F to 104°F).
When you use the camera in cold climate regions or at high altitudes, observe the
following precautions.
• Battery performance deteriorates temporarily when cold. Keep the camera and
batteries warm under your clothing before use.
• Camera performance may deteriorate temporarily if it is exposed to extreme cold
for an extended period. For example, the monitor may appear darker than normal
immediately after the camera is turned on, or residual images may be produced.
● Environmental conditions that are likely to cause condensation
Fogging (condensation) may occur on the inside of the monitor or lens when there
are sharp temperature changes or high humidity, such as in the environmental
conditions described below. This is not a camera malfunction or defect.
• The camera is suddenly immersed in cold water after being in a hot place on land.
• The camera is brought to a warm place such as inside a building after being in the
cold outdoors.
• The battery-chamber/memory card slot cover is opened or closed in a highhumidity environment.
● Reducing condensation
• Open the battery-chamber/memory card slot cover, put the camera and a
commercially-available desiccant in a container such as a plastic bag, and seal the
container.
Condensation is less likely to occur if the humidity inside the camera is reduced.
• Before using the camera underwater, avoid storing it in locations where the
camera may become hot (such as under direct sunlight).
If you submerge the camera underwater while it is hot, the sudden change in
temperature may cause condensation.
● Clearing the fogging
• Turn off the camera and open the battery-chamber/memory card slot cover while
in a place where the ambient temperature is stable (avoid places with high
temperature, high humidity, sand, or dust).
To clear the fogging, remove the battery and memory card, and leave the batterychamber/memory card slot cover open to allow the camera to adjust to the
ambient temperature.
18
Introduction
<Important> Notes about shockproof, waterproof, and dustproof
performance and condensation
Inspection and repair
• If the camera is exposed to shock, it is recommended to consult your retailer or
Nikon-authorized service representative to confirm the waterproof performance
(charged service).
• If the waterproof packing begins to deteriorate, consult your retailer or Nikonauthorized service representative. The waterproof performance of the waterproof
packing may start to deteriorate after one year.
• If water seeps inside the camera, immediately stop using it and take it to your
Nikon-authorized service representative.
19
Introduction
<Important> Notes about shockproof, waterproof, and dustproof
performance and condensation
Parts of the camera
The camera body.................................................................................................................. 21
Screen indicators...................................................................................................................24
Using the flexible buttons................................................................................................. 28
The power-on lamp..............................................................................................................30
20
Parts of the camera
The camera body
1
Eyelet for strap .................................... 32
2
Shutter-release button..........................
................................................................42, 77
6
Self-timer lamp ................... 53, 55, 60
AF-assist illuminator ......................140
( movie-record) button .........
.....................................................................123
Power switch ........................................38
7
Power-on lamp ...................................30
8
Speaker
4
Flash ...........................................................52
9
Lens (with protective glass)
5
Microphone (stereo)
3
21
Parts of the camera
The camera body
10
11
12
13
Flexible buttons
Referred to as “flexible button 1”
through “flexible button 4”, in
order from top to bottom. ................
........................................................................28
Monitor ....................................................24
Charge lamp ..............................36, 148
Flash lamp...............................................52
Multi selector
Pressing up, down, left, or right
on the multi selector is expressed
as , , , or .
: Zoom .........................................76
22
Parts of the camera
The camera body
14
(shooting/playback mode)
button ...................................................... 45
15
Battery-chamber/memory card
slot cover ................................................ 33
16
HDMI micro connector (Type
D) .............................................................. 153
17
Memory card slot .............................. 33
18
Micro-USB connector ...........................
.................................................. 36, 155, 160
19
23
Parts of the camera
The camera body
Waterproof packing .........................15
20
Tripod socket .....................................199
21
Battery chamber ................................ 33
22
Battery latch ..........................................33
Screen indicators
The information that is displayed on the screen changes depending on the camera’s
settings and state of use.
Some information is not displayed if no operations are performed for several seconds.
Information is displayed again when either a flexible button or the multi selector is
pressed.
Shooting screen
1
Flexible icons ....................................... 28
7
[Smile timer] ........................................55
2
“Date not set”..................................... 176
8
[Shoot at intervals] .........................61
3
[Flash] .......................................................52
9
Battery level .......................................... 42
4
[Change colors] ................................. 72
10
Charging AC Adapter connection
5
[Self-timer] ........................................... 53
11
Zoom ........................................................ 76
6
[Self-portrait timer] ........................53
24
Parts of the camera
Screen indicators
12
Obtaining location data ............. 146
13
Airplane mode ................................. 130
14
Wi-Fi communication .................. 130
15
Bluetooth communication ...............
.....................................................................130
16
Image lock ............................................. 47
25
Parts of the camera
Screen indicators
17
Shooting mode .......................... 50, 57
18
Number of exposures remaining
(still images) ..........................................74
19
Remaining movie recording
time .........................................................123
20
Internal memory ................................42
21
Shutter speed....................................... 77
22
F-number.................................................77
23
Focus area (target finding AF) .........
........................................................................50
26
Parts of the camera
Screen indicators
24
Focus area (center) ........................... 42
25
Focus area (face detection)................
........................................................................77
26
Focus indicator ................................... 42
Playback screen
1
Flexible icons ....................................... 28
10
[Favorites] .......................................... 108
2
Date of recording
11
Volume ..................................................126
3
Time of recording
12
Switch to full-frame ......................... 86
4
Message (reply) .................................. 90
13
[Grading] .............................................104
5
Message .................................................. 89
14
Playback mode ................................... 45
6
Cropped ..................................................85
15
Current image number
7
Battery level .......................................... 42
16
Movie/message recording time
8
Charging AC Adapter connection
17
Internal memory ................................42
9
Image lock ............................................. 47
18
Movie playback guide ................. 123
27
Parts of the camera
Screen indicators
Using the flexible buttons
If you press a flexible button while in the shooting screen or playback screen, the
menu for the current mode is displayed, and you can change various settings.
1: Flexible button 1
2: Flexible button 2
3: Flexible button 3
4: Flexible button 4
1
Press a flexible button to display the menu.
• Depending on the camera’s settings, the menu will not be displayed even if you
2
press a flexible button.
Press a flexible button to select an item.
• When
is displayed, press flexible button 1 (
) to return to the previous screen.
• Certain options cannot be selected or displayed depending on the camera’s
settings.
28
Parts of the camera
Using the flexible buttons
3
Press a flexible button to select an item.
• When the menu content continues on another page, a guide (1) indicating the
page position is displayed. To display the previous or next page, press the multi
selector
.
4
Press a flexible button to confirm the setting.
• The current setting is displayed with a yellow bar (1).
• When a menu is displayed, you can return to shooting mode by pressing the
shutter-release button or
(
) button.
29
Parts of the camera
Using the flexible buttons
The power-on lamp
The power-on lamp turns on or flashes in the following situations.
Status
On
Meaning
• Turns on immediately after the camera is turned on.
• The camera is connected to a computer with the USB cable.
• The power-on lamp turns on even if the camera is off when
communicating with a smart device through the camera settings menu
[Network menu] [Bluetooth] [Send while off].
Flashing
Flashing
quickly
• The camera is in standby mode because it has not been operated for
about three minutes.
The auto off function (page 44)
• The camera detects a human face when using [Underwater face
framing] in [Choose a style].
• The camera is shooting while [Choose a style] is set to [Shoot at
intervals].
• [Battery exhausted.] is displayed on the screen. Charge or replace the
battery.
• The inside of the camera or the battery has become hot. The camera
turns off automatically. Wait until the camera or battery temperature has
cooled before resuming use.
30
Parts of the camera
The power-on lamp
Getting started
Attaching the strap...............................................................................................................32
Inserting the battery and memory card....................................................................... 33
Charging the battery........................................................................................................... 36
Camera setup......................................................................................................................... 38
31
Getting started
Attaching the strap
Pass the strap through either the left or right strap eyelet and attach the strap.
32
Getting started
Attaching the strap
Inserting the battery and memory card
1
Open the battery-chamber/memory card slot cover.
2
Insert the battery and memory card.
• With the battery’s positive and negative terminals oriented correctly, move the
yellow battery latch (1), and fully insert the battery (2).
• With the memory card oriented correctly, slide it into the memory card slot until it
clicks into place (3).
• Be careful not to insert the battery or memory card upside-down or backward, as
this could cause a malfunction.
• If the write-protect switch of the memory card is locked, you cannot shoot, delete
images, or format the memory card.
• Camera data, including images and movies, can be saved either on a memory card
or in the internal memory. To use the internal memory, remove the memory card.
33
Getting started
Inserting the battery and memory card
3
Close the battery-chamber/memory card slot cover.
• Lay the cover completely flat in the direction indicated by the arrow (1), and fully
slide it in (2).
• Sliding the cover while it is open may damage the camera.
Notes about waterproof and dustproof performance
Notes about shockproof, waterproof, and dustproof performance (page 16)
Formatting a memory card
The first time you insert a memory card that has been used in another device into this
camera, make sure to format it with this camera.
• Note that formatting a memory card permanently deletes all images and other
data on the memory card.
Be sure to make copies of any images you wish to keep before formatting the memory
card.
• Insert the memory card into the camera and select the camera settings menu
[Format card].
Removing the battery or memory card
Turn the camera off and make sure that the power-on lamp and screen have turned
off, and then open the battery-chamber/memory card slot cover.
• Move the yellow battery latch to eject the battery.
• Gently push the memory card into the camera to partially eject the memory card.
• Be careful when handling the camera, battery, and memory card immediately after
using the camera, as they may be hot.
Memory cards that can be used
The camera supports SD, SDHC, and SDXC memory cards.
34
Getting started
Inserting the battery and memory card
• Memory cards with an SD Speed Class rating of 6 (Video Speed Class V6) or faster
are recommended for recording movies. When using a memory card with a lower
Speed Class rating, movie recording may stop unexpectedly.
• If you use a card reader, make sure that it is compatible with your memory card.
• Contact the manufacturer for information on features, operation, and limitations
on use.
35
Getting started
Inserting the battery and memory card
Charging the battery
1
Use the USB cable (included) to connect the Charging AC
Adapter to the camera with the battery inserted.
2
Insert the plug of the Charging AC Adapter into an electrical
outlet.
• A plug adapter is attached depending on the country or region of purchase. The
shape of the plug adapter varies with the country or region of purchase.
• When charging starts, the charge lamp flashes slowly. The charging time for a fully
exhausted battery is about 1 hour and 40 minutes.
• When charging is complete, the charge lamp turns off.
• The battery cannot be charged when the charge lamp quickly flashes, possibly due
to one of the reasons described below.
3
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
When charging is complete, unplug the Charging AC Adapter
from the electrical outlet, and disconnect the USB cable.
Notes about the USB cable
• Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire or electric shock.
• Check the shape and direction of the plugs and do not insert or remove the plugs at an
angle.
36
Getting started
Charging the battery
Notes about charging the battery
• Do not, under any circumstances, use another make or model of AC adapter other than
the EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially available
USB-AC adapter or a battery charger for a mobile phone. Failure to observe this
precaution could result in overheating or in damage to the camera.
• You can use the camera while it is charging, but the charging time will take longer.
However, if the battery level is extremely low, you may not be able to use the camera
while the battery is charging.
37
Getting started
Charging the battery
Camera setup
Use the flexible buttons and multi selector to select and adjust settings.
1: Flexible button 1
2: Flexible button 2
3: Flexible button 3
4: Flexible button 4
5: Multi selector
1
Press the power switch to turn on the camera.
2
Press
on the multi selector to select a language and press
flexible button 4 ( ) to confirm the selection.
• The displayed languages vary depending on the country or region.
• The language can be changed at any time using the camera settings menu
[Language].
38
Getting started
Camera setup
3
Press flexible button 3 (
4
5
Press flexible button 2, 3, or 4 to select a date format.
[Yes]).
Set the date and time.
• Press
to highlight items and
to change them.
• Select the minute field and press flexible button 4 (
) to confirm the setting.
• Press flexible button 3 ( ) to set daylight saving time. When it is on, the time is one
6
hour earlier and
is displayed. If you press flexible button 3 (
off, the time goes back one hour.
) again to turn it
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• You can change the date and time using the camera settings menu
7
time].
[Date and
Use
to select a background design and press flexible button
4 ( ).
• To restore the default background designs, press flexible button 3 (
).
• You can change the background design using the camera settings menu
background].
39
Getting started
Camera setup
[Menu
8
Read the message about the waterproof function, and press .
• Waterproofing-related messages are displayed at times such as when turning on
9
the camera for the first time or after charging.
Confirm the last message and press flexible button 4 (
• Setup is complete and the camera switches to the shooting screen.
40
Getting started
Camera setup
).
Basic shooting and playback
operations
Shooting images................................................................................................................... 42
Playing back images............................................................................................................ 45
Deleting images.................................................................................................................... 46
41
Basic shooting and playback operations
Shooting images
[Point and shoot] is used here as an example. In
[Point and shoot], the
camera recognizes the shooting conditions when you frame a picture, and you can
take pictures in accordance with the conditions.
1
Press flexible button 1 ( ) to display the
shooting screen.
• In
2
[Point and shoot],
[Point and shoot]
is displayed at the bottom right of the screen.
Check the battery level and number of exposures remaining.
• Battery level (1)
: The battery level is high.
: The battery level is low.
• Number of exposures remaining (2)
is displayed when no memory card is inserted in the camera, and images are
saved in the internal memory.
42
Basic shooting and playback operations
Shooting images
3
Hold the camera steady.
• Keep fingers and other objects away from the lens, flash, AF-assist illuminator,
microphone, and speaker.
4
Frame the picture.
• Use the multi selector to change the zoom lens position.
To zoom in: Press .
To zoom out: Press .
5
Press the shutter-release button halfway.
• To press the shutter-release button “halfway” means to press and hold the button at
the point where you feel a slight resistance.
• When the subject is in focus, the focus area or focus indicator is displayed in green.
• When you are using digital zoom, the camera focuses in the center of the frame
and the focus area is not displayed.
• If the focus area or focus indicator flashes, the camera is unable to focus. Modify the
composition and try pressing the shutter-release button halfway again.
43
Basic shooting and playback operations
Shooting images
6
Without lifting your finger, press the shutter-release button all
the way down.
Notes about saving images or movies
The indicator showing the number of exposures remaining or the indicator showing the
remaining recording time flashes, or [Please wait for the camera to finish recording.] is
displayed while images or movies are being saved. Do not open the battery-chamber/
memory card slot cover or remove the battery or memory card while an indicator
is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
The auto off function
• When no operations are performed for about three minutes, the screen turns off, the
camera enters standby mode, and then the power-on lamp flashes. The camera turns off
after remaining in standby mode for about three minutes.
• To turn the screen back on while the camera is in standby mode, perform an operation
such as pressing the power switch or shutter-release button.
Using a tripod
We recommend using a tripod to stabilize the camera in the following situations:
• When shooting in dim lighting with [Flash] set to [Flash off]
• When the zoom is at a telephoto position
44
Basic shooting and playback operations
Shooting images
Playing back images
1
Press the
(shooting/playback mode) button to enter fullframe playback mode.
• If you press and hold down the
2
camera turns on in playback mode.
Press the multi selector
or
button while the camera is turned off, the
to select an image to display.
•
•
•
•
Press and hold down
to scroll through the images quickly.
To play back a recorded movie, press .
button or shutter-release button.
To return to shooting mode, press the
Press
in full-frame playback mode to zoom in on an image.
Playback zoom (page 84)
• In full-frame playback mode, press to switch to thumbnail playback mode and
display multiple images on the screen.
Thumbnail playback (page 86)
45
Basic shooting and playback operations
Playing back images
Deleting images
1
In full-frame playback mode, press flexible button 3 ( ).
2
Use flexible button 2, 3, or 4 to select the desired deletion
method.
• If you selected
3
4
[Erase this picture only] or
to step 5.
• To exit without deleting, press flexible button 1 (
[Erase all pictures], proceed
).
to select an image to be deleted, and
Use the multi selector
then press flexible button 2 ( ).
• The selected image is indicated by a check mark.
• A check mark is displayed or removed each time you press flexible button 2 (
• Press flexible button 3 (
) to remove all check marks.
).
Add check marks to all images that you want to delete and then
press flexible button 4 ( ) to confirm the selection.
46
Basic shooting and playback operations
Deleting images
5
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• Deleted images cannot be recovered.
Restricting image deletion (image lock)
To prevent accidental deletion of images, you can lock image deletion.
• When image lock is set, [Format card] and [Format memory] are also locked.
• To remove image lock, follow the same procedure used to set image lock.
1
Press and hold down flexible buttons 1 and 4 at the same time
while in shooting mode or playback mode.
2
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• When image lock is set,
is displayed on the screen.
47
Basic shooting and playback operations
Deleting images
Shooting features
Shooting menu list............................................................................................................... 49
Point and shoot..................................................................................................................... 50
Flash...........................................................................................................................................52
Self-timer..................................................................................................................................53
Smile timer.............................................................................................................................. 55
Choose a style........................................................................................................................ 57
Decorate...................................................................................................................................71
Change colors........................................................................................................................ 72
Change sounds...................................................................................................................... 73
Choose a size.......................................................................................................................... 74
Using the zoom......................................................................................................................76
Focusing................................................................................................................................... 77
Default settings list for flash and self-timer.................................................................80
Functions that cannot be used simultaneously when shooting......................... 81
48
Shooting features
Shooting menu list
You can use the functions below when you press a flexible button in shooting mode.
Flexible button
Description
Point and
shoot
Sets the shooting mode to [Point and shoot (page 50)].
The camera recognizes the shooting conditions when you frame a
picture, and you can take pictures in accordance with the conditions.
Flash mode/
self-timer
Flash (page 52)
Allows you to change the flash settings to match the shooting
conditions.
Self-timer (page 53)
The camera is equipped with a self-timer that releases the shutter 10
seconds or 5 seconds after you press the shutter-release button.
You can also set [Smile timer (page 55)].
More picture
options
Choose a style (page 57)
When a style (shooting conditions and effects) is selected, camera
settings are automatically optimized for the selected condition.
Decorate (page 71)
Allows you to add a frame around your images when taking pictures.
Change colors (page 72)
Allows you to adjust the brightness (exposure compensation) or
vividness, or keep a specified color in the image and change the
other colors to black and white.
Settings
Change sounds (page 73)
Allows you to configure the shutter and button sounds.
Choose a size (page 74)
Allows you to set the size of still images and movies.
Camera settings
Allows you to change a number of general settings.
Using the camera settings menu (page 128)
49
Shooting features
Shooting menu list
Point and shoot
When you use this camera for the first time, the shooting mode is set to
[Point
and shoot]. The camera recognizes the shooting conditions when you frame a
picture, and you can take pictures in accordance with the conditions.
[Point and shoot] is the default shooting mode for this camera.
Shooting mode
flexible button 1 (
)
• When the camera detects the main subject, it focuses on that subject (target
finding AF).
• The flash may fire when shooting in low light.
• When shooting in low light, the use of a tripod is recommended.
• When the digital zoom is in effect, the camera does not recognize the shooting
conditions.
Using target finding AF
The camera focuses in the manner described below when you press the shutterrelease button halfway.
• The camera detects the main subject and focuses on it. When the subject is in
focus, the focus area is displayed in green. If a human face is detected, the camera
automatically sets focus priority on it.
• If no main subject is detected, the camera focuses on the area in the center of the
frame.
Notes about target finding AF
• Depending on shooting conditions, the subject that the camera determines to be the
main subject may vary.
50
Shooting features
Point and shoot
• The camera may not detect the main subject appropriately in the following situations:
-
When the subject is very dark or bright
When the main subject lacks clearly defined colors
When the shot is framed so that the main subject is at the edge of the screen
When the main subject is composed of a repeating pattern
51
Shooting features
Point and shoot
Flash
You can change the flash settings to match the shooting conditions.
Shooting mode
flexible button 2 (
)
Flexible button
Auto flash
Flash off
Flash
Description
The flash fires when necessary, such as in dim lighting.
The flash does not fire.
We recommend using a tripod to stabilize the camera when
shooting in dark surroundings.
Always fire flash The flash fires whenever a picture is taken.
Use to “fill-in” (illuminate) shadows and backlit subjects.
Notes about [Flash]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Notes about shooting with the flash
When you use the flash at the wide-angle zoom position, the edge of the image may be
dark depending on the shooting distance. This may be improved if you move the zoom
control slightly toward the telephoto position.
The flash lamp
The status of the flash can be confirmed by pressing the shutter-release button halfway.
• On: The flash fires when you press the shutter-release button all the way down.
• Flashing: The flash is charging. The camera cannot shoot images.
• Off: The flash does not fire when a picture is taken.
The flash setting
• The setting may not be changed when using some shooting modes or settings.
Default settings list for flash and self-timer (page 80)
• The setting applied in [Point and shoot] is saved in the camera’s memory even after the
camera is turned off.
52
Shooting features
Flash
Self-timer
The camera is equipped with a self-timer that releases the shutter 10 seconds or
5 seconds after you press the shutter-release button.
Shooting mode
flexible button 2 (
)
Flexible button
Off
10 s
Self-portrait
timer
Smile timer
1
2
Self-timer
Description
The self-timer is not used.
The camera releases the shutter 10 seconds after you press the
shutter-release button.
Use on important occasions, such as weddings.
The camera releases the shutter 5 seconds after you press the
shutter-release button.
Use for self-portraits.
When the camera detects a smiling face, you can take a picture
automatically without pressing the shutter-release button.
Press flexible button 3 (
portrait timer]).
[10 s]) or flexible button 4 ( [Self-
Frame the picture and press the shutter-release button halfway.
• When using
• When using
[10 s], make sure that the subjects are in focus.
[Self-portrait timer], press the shutter-release button all the way
down in step 3, and then frame the picture.
53
Shooting features
Self-timer
3
Press the shutter-release button all the way down.
• Countdown starts.
• The self-timer lamp flashes and then glows steadily about one second before the
shutter is released.
• When the shutter is released, the self-timer is set to
[Off].
• To stop the countdown, press the shutter-release button again.
Notes about [Self-timer]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Focus and exposure when shooting with the self-timer
•
[10 s]: The focus and exposure are locked when you press the shutter-release
button all the way down.
•
[Self-portrait timer]: The focus and exposure are set immediately before the shutter
is released.
The self-timer setting
The setting may not be changed when using some shooting modes or settings.
Default settings list for flash and self-timer (page 80)
54
Shooting features
Self-timer
Smile timer
When the camera detects a smiling face, you can take a picture automatically
without pressing the shutter-release button. The skin softening function makes the
skin tones of human faces smoother.
Shooting mode
1
2
flexible button 2 (
)
Self-timer
Smile timer
Frame the picture.
• Point the camera at a human face.
Without pressing the shutter-release button, wait for the subject
to smile.
• If the camera detects that the face framed by the double border is smiling, the
shutter is automatically released.
3
• Whenever the camera detects a smiling face, it automatically releases the shutter.
• The shutter-release button can also be used for shooting.
End automatic shooting.
• Press flexible button 2 (
)
[Self-timer]
[Off].
Notes about [Smile timer]
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
• Under some shooting conditions, the camera may be unable to detect faces or smiles.
Notes about face detection (page 78)
When the self-timer lamp flashes
When using [Smile timer], the self-timer lamp flashes when the camera detects a face and
flashes quickly immediately after the shutter is released.
Using skin softening
If human faces are detected, the camera processes the image to soften facial skin
tones before saving the image (up to three faces).
[Make skin prettier] can also be applied to saved images by using [Add makeup]
in playback mode.
Add makeup (page 92)
Notes about skin softening
• It may take more time than usual to save images after shooting.
55
Shooting features
Smile timer
• Under some shooting conditions, the desired results may not be achieved, and effects
may be applied to areas of the image where there are no faces.
56
Shooting features
Smile timer
Choose a style
When a style (shooting conditions and effects) is selected, camera settings are
automatically optimized for the selected condition.
1
In shooting mode, press flexible button 3 ( ).
2
Press flexible button 2 (
3
Use the multi selector
button 4 ( ).
[Choose a style]).
to select a style and press flexible
You can select from the following.
Shoot night scenes (page 58)
Shoot close-ups (page 58)
Photograph food (page 59)
Shoot under water (page 59)
Underwater face framing (page 60)
Shoot at intervals (page 61)
Take a series of pictures (page 62)
Photograph fireworks (page 63)
57
Shooting features
Choose a style
Shoot backlit scenes (page 63)
Mirror (page 64)
Add a bubble effect (page 64)
Add a neon effect (page 65)
Add a cartoon effect (page 66)
Take soft pictures (page 66)
Create a diorama effect (page 66)
Shoot a movie miniature (page 67)
Add light trails (page 68)
Picture-in-picture (page 69)
Notes about [Choose a style]
The expected effect may not be achieved depending on the subject.
Shoot night scenes
The camera captures several images of a night scene and composites them into a
single image.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• The camera focuses at infinity.
• When the shutter-release button is pressed all the way, the camera captures a
series of images which are combined into a single image and saved.
• Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking a picture, do not turn the camera off before the
screen switches to the shooting screen.
Notes about [Shoot night scenes]
• The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the shooting screen.
• Taking a series of pictures may not be possible in certain shooting conditions.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Shoot close-ups
You can shoot subjects up close.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
58
Shooting features
Choose a style
Choose a style
use
to
• The camera focuses on the area in the center of the frame.
• The camera automatically zooms to the closest position at which it can focus.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Notes about [Shoot close-ups]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Photograph food
The camera adjusts the hue and captures images of food.
Shooting mode flexible button 3 (
flexible button 4 (
)
select
1
Use the multi selector
flexible button 4 ( ).
)
Choose a style
use
to
to adjust the hue setting and press
• The hue setting is saved in the camera’s memory even after the camera is turned
2
off.
Frame the subject and take a picture.
• The camera focuses on the area in the center of the frame.
• The camera automatically zooms to the closest position at which it can focus.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Notes about [Photograph food]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Shoot under water
The camera performs image processing suited for shooting underwater.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
See " <Important> Notes about shockproof, waterproof, and dustproof
performance and condensation (page 15)" for more information on shooting
underwater.
59
Shooting features
Choose a style
to
1
Confirm the messages related to waterproofing.
• Press the multi selector
2
to display the next message. Press flexible button 4 (
to skip the messages and change to the shooting screen.
)
Frame the subject and take a picture.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Clean the camera within 60 minutes after using it underwater or at the beach.
Cleaning after using the camera underwater (page 195)
Notes about [Shoot under water]
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
• Wireless communication is not available when the camera is underwater.
Underwater face framing
You can take pictures of human faces underwater automatically without submerging
your face.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
See " <Important> Notes about shockproof, waterproof, and dustproof
performance and condensation (page 15)" for more information on shooting
underwater.
1
Confirm the messages related to waterproofing.
• Press the multi selector
2
to display the next message. Press flexible button 4 (
to skip the messages and change to the shooting screen.
Press the shutter-release button all the way down in shooting
mode for shooting to start automatically.
60
Shooting features
Choose a style
)
3
Submerge the camera into the water, and point it at a human
face underwater.
• When the camera detects a human face, the power-on lamp and self-timer lamp
flash, and the shutter is automatically released.
4
• When the shutter is released, the lamps flash quickly.
• The zoom position is fixed at wide-angle position.
Press the shutter-release button all the way again to stop
shooting.
• When four images are captured or the camera remains in automatic shooting mode
for about 30 seconds, shooting ends automatically.
• When shooting ends, the captured images are displayed on the screen. Press
flexible button 4 (
) to return to the shooting screen.
Clean the camera within 60 minutes after using it underwater or at the beach.
Cleaning after using the camera underwater (page 195)
Notes about [Underwater face framing]
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
• The camera may not be able to detect faces depending on the clarity of the water or the
shape of the goggles used.
• Wireless communication is not available when the camera is underwater.
Shoot at intervals
The camera can automatically capture still images at pre-determined intervals.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• Images captured in one shooting are saved in one folder and can be viewed in a
slide show.
Play back a series (page 114)
• Use of a tripod is recommended.
Flexible button
Shoot every 30
seconds
Description
Captures an image every 30 seconds.
Maximum number of images that can be captured: Approx.
280 images
61
Shooting features
Choose a style
Flexible button
Description
Shoot once a
minute
Captures an image every minute.
Maximum number of images that can be captured: Approx.
140 images
Shoot every 5
minutes
Captures an image every five minutes.
Maximum number of images that can be captured: Approx.
30 images
1
2
Use flexible button 2, 3, or 4 to select the shooting interval.
Press the shutter-release button all the way to shoot the first
image.
• When the camera detects a human face, it focuses on that face.
Using face detection (page 77)
3
• In between each shot, the screen turns off and the power-on lamp flashes.
• The screen automatically turns on again just before the next image is captured.
Press the shutter-release button halfway to stop shooting.
• When the maximum number of images are captured, shooting ends automatically.
Notes about [Shoot at intervals]
• Use a sufficiently charged battery to prevent the camera from turning off during
shooting.
• Do not remove the memory card until shooting ends.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Take a series of pictures
While the shutter-release button is held all the way down, the camera shoots images
continuously.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• The camera shoots up to 11 images continuously at a rate of about 4.8 frames per
second (fps) (when [Choose a size] [Photo size] is set to [Large (13
megapixels)]).
• When the camera detects a human face, it focuses on that face.
Using face detection (page 77)
62
Shooting features
Choose a style
Notes about [Take a series of pictures]
• The frame rate for continuous shooting may vary depending on the current photo size
setting, the memory card used, or shooting condition.
• Focus, exposure, and hue for the second and subsequent images are fixed at the values
determined with the first image.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Photograph fireworks
The camera captures fireworks at a slow shutter speed.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• The camera focuses at infinity.
• The shutter speed is fixed at four seconds.
• Use of a tripod is recommended because the shutter speed is slow.
Notes about [Photograph fireworks]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Shoot backlit scenes
When there are very bright and dark areas in the same frame, the high dynamic
range (HDR) compositing is applied and loss of details in highlights or shadows is
minimized.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• The camera focuses on the area in the center of the frame.
• When the shutter-release button is pressed all the way, the camera shoots images
continuously and saves the following two images.
- A non-HDR composite image
- An HDR composite image in which the loss of details in highlights or shadows is
minimized
• Once the shutter-release button is pressed all the way, hold the camera still until a
still image is displayed. After taking a picture, do not turn the camera off before the
screen switches to the shooting screen.
• If HDR compositing could not be performed, the camera saves a non-HDR
composite image and an image in which dark areas are corrected.
63
Shooting features
Choose a style
• If there is only enough memory to save one image, an image processed at the
time of shooting, in which dark areas of the image are corrected, is the only image
saved.
Notes about [Shoot backlit scenes]
• The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower
than that seen on the shooting screen.
• Under some shooting conditions, dark shadows may appear around bright subjects or
bright areas may appear around dark subjects.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Mirror
You can take pictures that are vertically or horizontally symmetrical over the center of
the frame.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Flexible button
Choose a style
use
to
Description
Top → bottom The top half of the screen is flipped over the bottom half, and the
image is composited and displayed.
Left → right
1
2
The left half of the screen is flipped over the right half, and the
image is composited and displayed.
Use flexible button 2 or 3 to select the flipping direction.
Frame the subject and take a picture.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Notes about [Mirror]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Add a bubble effect
This effect makes the image appear to be projected on a bubble.
64
Shooting features
Choose a style
Shooting mode flexible button 3 (
select
flexible button 4 (
)
1
2
)
Choose a style
use
to
Frame the main subject in the framing guide displayed on the
shooting screen.
Shoot.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Notes about [Add a bubble effect]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Add a neon effect
This effect makes the outlines of the image appear to glow with neon tubing.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
1
Use the multi selector
flexible button 4 ( ).
)
Choose a style
use
to
to select the outline color and press
• The color setting is saved in the camera’s memory even after the camera is turned
2
off.
Frame the subject and take a picture.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
• After taking a picture, do not turn the camera off before the screen switches to the
shooting screen.
Notes about [Add a neon effect]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
65
Shooting features
Choose a style
Add a cartoon effect
Performs tone compensation and makes the image appear like a cartoon.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
• After taking a picture, do not turn the camera off before the screen switches to the
shooting screen.
Take soft pictures
The camera applies a slight soft-focus effect outside the framing guide for a softer
image.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
1
2
)
Choose a style
use
to
Frame the main subject in the framing guide displayed on the
shooting screen.
Shoot.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Notes about [Take soft pictures]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Create a diorama effect
The camera applies a slight soft-focus effect everywhere except the center of the
screen for a diorama-like image.
This effect is well-suited for images captured from a high vantage point with the
main subject in the center of the image.
66
Shooting features
Choose a style
Shooting mode flexible button 3 (
select
flexible button 4 (
)
1
2
)
Choose a style
use
to
Frame the main subject in the framing guide displayed on the
shooting screen.
Shoot.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
Notes about [Create a diorama effect]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Shoot a movie miniature
Captures miniature-like still images every two seconds and joins the still images to
create a movie with a maximum length of 10 seconds.
This effect is well-suited for images captured from a high vantage point with the
main subject in the center of the image.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• Use of a tripod is recommended.
1
2
Frame the main subject in the framing guide displayed on the
shooting screen.
Press the shutter-release button to capture the first image.
• The camera focuses on the area in the center of the frame.
• When the zoom is set to a position where the zoom indicator turns green, the
3
camera can focus on subjects as close as about 20 cm (7.9 in.) from the front of the
protective glass, or about 5 cm (2 in.) at the maximum wide-angle position.
• The camera releases the shutter automatically after the first image.
• The screen may turn off in between each shot.
To end shooting, press flexible button 1 ( ).
• When 300 images are captured, shooting ends automatically.
67
Shooting features
Choose a style
Notes about [Shoot a movie miniature]
• Use a sufficiently charged battery to prevent the camera from turning off during
•
•
•
•
•
•
shooting.
You cannot shoot when a memory card is not inserted.
Do not remove the memory card until shooting ends.
Focus, exposure, and hue are fixed at the values determined with the first image.
Sound and still images are not recorded.
The movie frame size is fixed at [Large (1080p)].
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Add light trails
Light trails such as the flow of car lights or motion of stars are captured.
The camera automatically captures moving subjects at regular intervals, compares
each image and composites only their bright areas, and then saves them as one
image.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
Choose a style
use
to
• Use of a tripod is recommended because the shutter speed is slow.
Flexible
button
Night
scenes
Description
Use to capture the flow of car lights against a night landscape background.
• The camera focuses on the area in the center of the frame.
• Shots are taken at a shutter speed of 4 seconds. When 50 shots are taken,
the camera automatically stops shooting.
• For every 10 shots taken, one composite image with trails overlapped
from the start of shooting is automatically saved.
• The size of still images is fixed at 1280 × 960 pixels.
Night
sky
Use to capture the motion of stars.
• The camera focuses at infinity.
• Shots are taken at a shutter speed of 25 seconds. When 300 shots are
taken, the camera automatically stops shooting.
• For every 30 shots taken, one composite image with trails overlapped
from the start of shooting is automatically saved.
• The size of still images is fixed at 2048 × 1536 pixels.
68
Shooting features
Choose a style
1
2
3
Press flexible button 2 or 3 to select the setting.
Start shooting.
• The screen may turn off during the shooting interval.
To end shooting before it automatically ends, press flexible
button 1 ( ).
• When you have obtained the desired trails, end shooting. If you continue shooting,
details in the composited areas may be lost.
Notes about [Add light trails]
• Use a sufficiently charged battery to prevent the camera from turning off during
shooting.
• You cannot shoot when a memory card is not inserted.
• Do not remove the memory card until shooting ends.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Time remaining
You can check the time remaining until shooting automatically ends on the screen.
Picture-in-picture
The camera composites a captured image and background to create an image as if
one picture was taken with an instant print camera and placed in another
background picture.
Shooting mode flexible button 3 (
select
flexible button 4 (
)
)
69
Shooting features
Choose a style
Choose a style
use
to
1
Use the multi selector
flexible button 4 ( ).
2
Frame and shoot the background.
to select a captured image and press
• The background is slightly blurred.
• The focus area is not displayed.
Notes about [Picture-in-picture]
• You cannot select [Picture-in-picture] if there are no images saved on the memory
card or in the internal memory.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
70
Shooting features
Choose a style
Decorate
You can add a frame around your images when taking pictures.
Shooting mode
flexible button 3 (
)
Decorate
• This function is not displayed when [Variety menu (page 136)] is set to [Off].
1
Use the multi selector
flexible button 4 ( ).
2
Frame the subject and take a picture.
• Press flexible button 3 (
to select the desired frame and press
) to remove the frame.
Notes about [Decorate]
• The area that is captured becomes smaller depending on the design of the frame.
• When using borderless printing to print images that you have added frames to, the
frames may not be printed.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
71
Shooting features
Decorate
Change colors
You can adjust the brightness (exposure compensation) or vividness, or keep a
specified color in the image and change the other colors to black and white.
Shooting mode
flexible button 3 (
)
Flexible button
Brighter/darker
Change colors
Description
Adjust the brightness (exposure compensation) of the entire
image.
More vivid/less vivid Adjust the vividness of the entire image.
Highlight colors
1
2
3
Select the color you want to highlight. Colors not selected
are changed to black and white.
Use flexible button 2, 3, or 4 to select the setting.
Use the multi selector
button 4 ( ).
• Press flexible button 3 (
• When colors are adjusted,
to adjust colors and press flexible
) to turn the effect off.
is displayed on the shooting screen.
Frame the subject and take a picture.
• The setting is saved in the camera’s memory even after the camera is turned off.
Notes about [Change colors]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
72
Shooting features
Change colors
Change sounds
You can configure the shutter and button sounds.
Shooting mode
flexible button 4 ( )
Flexible button
Change sounds
Description
Pick a
shutter sound
Allows you to configure the shutter and focus sounds.
Pick a
button sound
Allows you to select the beep heard when you use the menus, etc.
• When recording movies, the shutter sound is not heard.
• When [Variety menu (page 136)] is set to [Off], you cannot select
the type of sound.
• You cannot select the sounds that are heard when the camera is
turned on and when an error occurs.
• When [Variety menu (page 136)] is set to [Off], you cannot select
the type of sound.
Turn sounds
on or off
Turn all sounds on or off.
•
[Turn sounds on]: Turns on all sounds.
•
[Turn sounds off]: Mutes all sounds.
• This function is not displayed when [Variety menu (page 136)] is
set to [Off].
1
2
3
Press flexible button 2 or flexible button 3.
Use the multi selector
to select the type of sound.
•
: Set the standard sounds.
•
: Sounds are not heard.
• Press flexible button 3 ( ) to play the selected sound.
Press flexible button 4 (
).
• The sound is set.
73
Shooting features
Change sounds
Choose a size
Photo size
Select the combination of image size and compression ratio to be used when saving
images.
Shooting mode
size
flexible button 4 ( )
Choose a size
Photo
The larger the image size, the larger the size at which it can be printed, and the lower
the compression ratio, the higher the quality of the images, but the number of
images that can be saved is reduced.
The changed setting is also applied to [Choose a style] and [Change colors].
Image size* (pixels)
Aspect ratio (horizontal to vertical)
Flexible button*
Large (13 megapixels)
(default setting)
Medium (4 megapixels)
Small (2 megapixels)
Compression ratio
4160×3120
4:3
Approx. 1:4
2272×1704
4:3
Approx. 1:8
1600×1200
4:3
Approx. 1:8
* The numerical values indicate the number of pixels that are captured.
Example:
Large (13 megapixels) = approx. 13 megapixels, 4160 × 3120 pixels
Notes about [Photo size]
This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
Number of images that can be saved
• The approximate number of images that can be saved can be checked on the screen
when shooting.
74
Shooting features
Choose a size
• Note that due to JPEG compression, the number of images that can be saved may vary
greatly depending on the image content, even when using memory cards with the
same capacity and the same photo size setting. In addition, the number of images that
can be saved may vary depending on the make of the memory card.
• If the number of exposures remaining is 10,000 or more, the number of exposures
remaining display shows “9999”.
Movie frame size
Select the desired movie option to record.
Shooting mode
frame size
flexible button 4 ( )
Flexible button
Choose a size
Image size
Aspect ratio (horizontal to vertical)
Movie
Frame rate
1920×1080
16:9
Approx. 30 fps
Small (640)
640×480
4:3
Approx. 30 fps
Small (old-fashioned)2
640×480
4:3
Approx. 15 fps
Large (1080p)1
(default setting)
1 Cannot be selected when you are using the internal memory.
2 Allows you to record movies with an atmosphere and hue similar to movies shot on old
8mm film.
75
Shooting features
Choose a size
Using the zoom
When you press the multi selector
, the zoom lens position changes.
• To zoom in (telephoto position): Press .
• To zoom out (wide-angle position): Press . When you turn the camera on, the
zoom moves to the maximum wide-angle position.
• A zoom indicator is displayed on the shooting screen when
is pressed.
• Digital zoom (2), which allows you to further magnify the subject up to
approximately 4× the maximum optical zoom ratio, can be activated by pressing
when the camera is zoomed in to the maximum optical zoom position (1).
Digital zoom and Dynamic Fine Zoom
The zoom indicator changes to blue when the digital zoom is activated, and it changes to
yellow when the zoom magnification is increased further.
• Zoom indicator is blue: Image quality is not noticeably reduced by using the Dynamic
Fine Zoom.
• Zoom indicator is yellow: There may be cases in which image quality is noticeably
reduced compared to cases when the zoom indicator is blue.
• The indicator remains blue across a wider area when the image size is smaller.
76
Shooting features
Using the zoom
Focusing
The shutter-release button
Operation
Press
halfway
Description
To press the shutter-release button “halfway” means to press and hold the
button at the point where you feel a slight resistance.
• Focus and exposure (shutter speed and f-number) are set when you
press the shutter-release button halfway. Focus and exposure remain
locked while the button is pressed halfway.
• The focus area varies depending on the shooting mode and settings.
Press all the
way
To press the shutter-release button “all the way” means to press the
button down completely.
• The shutter is released when the shutter-release button is pressed all
the way.
• Do not use force when pressing the shutter-release button, as this may
result in camera shake and blurred images. Press the button gently.
Using face detection
In the following settings, the camera uses face detection to automatically focus on
human faces.
• [Point and shoot]
• [Underwater face framing], [Shoot at intervals], and [Take a series of
pictures] in [Choose a style]
• [Smile timer]
77
Shooting features
Focusing
If the camera detects more than one face, a double border is displayed around the
face that the camera focuses on, and single borders are displayed around the other
faces.
If no faces are detected when the shutter-release button is pressed halfway:
• When [Point and shoot] is selected, the focus area changes depending on the
shooting conditions that the camera recognizes.
• In [Shoot at intervals], [Take a series of pictures], or [Smile timer], the camera
focuses in the center of the frame.
Notes about face detection
• The camera’s ability to detect faces depends on a variety of factors, including the
direction in which the faces are looking.
• The camera cannot detect faces in the following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
Subjects not suitable for autofocus
The camera may not focus as expected in the following situations. In rare cases, the
subject may not be in focus despite the fact that the focus area or the focus indicator
is displayed in green:
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g. the sun
behind the subject makes that subject appear very dark)
• No contrast between the subject and surroundings (e.g. a portrait subject wearing
a white shirt is standing in front of a white wall)
• Point sources of light such as illuminations and night views, or subjects in which
brightness changes such as neon lights
• Several objects are at different distances from the camera (e.g. the subject is inside
a cage)
• Subjects with repeating patterns (window blinds, buildings with multiple rows of
similarly shaped windows, etc.)
• Subject is moving rapidly
78
Shooting features
Focusing
In the situations noted above, try pressing the shutter-release button halfway to
refocus several times, or focus on another subject positioned at the same distance
from the camera as the actual desired subject, and use focus lock.
Focus lock (page 79)
Focus lock
Focus lock shooting is recommended when the camera does not activate the focus
area that contains the desired subject. The following explains how to use focus lock
when the focus area is displayed in the center of the frame.
1
2
Position the subject in the center of the frame and press the
shutter-release button halfway.
• The camera focuses on the subject and the focus area is displayed in green.
• Exposure is also locked.
Without lifting your finger, recompose the picture.
• Make sure to maintain the same distance between the camera and the subject.
3
Press the shutter-release button all the way down to take the
picture.
79
Shooting features
Focusing
Default settings list for flash and self-timer
Shooting functions
Flash
Self-timer
Point and shoot
Shoot night scenes
*
Shoot close-ups
Photograph food
*
Shoot under water
Underwater face framing
*
Shoot at intervals
*
Take a series of pictures
*
*
Photograph fireworks
*
*
Shoot backlit scenes
*
Mirror
Add a bubble effect
Add a neon effect
Add a cartoon effect
Take soft pictures
Create a diorama effect
Shoot a movie miniature
*
Add light trails
*
Picture-in-picture
* Cannot be changed.
80
Shooting features
Default settings list for flash and self-timer
2s
Functions that cannot be used simultaneously
when shooting
Some functions cannot be used with other menu options.
Restricted
function
Flash
Description
When [Choose a style] is set to the following, the flash cannot be used.
•
•
•
•
•
•
•
Self-timer
When [Choose a style] is set to the following, the self-timer cannot be
used.
•
•
•
•
Self-portrait
timer
[Shoot night scenes]
[Photograph food]
[Take a series of pictures]
[Photograph fireworks]
[Shoot backlit scenes]
[Shoot a movie miniature]
[Add light trails]
[Underwater face framing]
[Shoot at intervals]
[Take a series of pictures]
[Photograph fireworks]
When [Choose a style] is set to the following, [Self-portrait timer]
cannot be used.
• [Shoot night scenes]
• [Add light trails]
Smile timer
When any of the following are enabled, [Smile timer] cannot be used.
• [Choose a style]
• [Highlight colors]
Decorate
When any of the following are enabled, [Decorate] cannot be used.
• [Smile timer]
• [Choose a style]
Change
colors
When any of the following are enabled, [Change colors] cannot be
used.
• [Smile timer]
• [Choose a style]
81
Shooting features
Functions that cannot be used simultaneously when shooting
Restricted
function
Photo size
Description
• When [Choose a style] is set to the following, [Photo size] cannot be
used.
- [Shoot a movie miniature]
- [Add light trails]
• When [Choose a style] is set to [Picture-in-picture], the setting is
fixed at [Small (2 megapixels)].
• When [Decorate] is selected, the setting is fixed at [Small (2
megapixels)].
Date stamp
When [Choose a style] is set to the following, the date and time cannot
be stamped on images.
• [Take a series of pictures]
• [Shoot a movie miniature]
• [Add light trails]
Electronic VR When [Choose a style] is set to the following, electronic VR is disabled.
•
•
•
•
•
•
Digital zoom
[Shoot night scenes]
[Shoot at intervals]
[Take a series of pictures]
[Photograph fireworks]
[Shoot backlit scenes]
[Add light trails]
• When [Smile timer] is selected, digital zoom cannot be used.
• When [Choose a style] is set to the following, digital zoom cannot be
used.
-
[Shoot night scenes]
[Shoot under water]
[Underwater face framing]
[Shoot backlit scenes]
[Take soft pictures]
[Create a diorama effect]
[Shoot a movie miniature]
82
Shooting features
Functions that cannot be used simultaneously when shooting
Playback features
Playback zoom....................................................................................................................... 84
Crop........................................................................................................................................... 85
Thumbnail playback............................................................................................................ 86
Playback menu list................................................................................................................87
Exchange messages............................................................................................................. 89
Picture play..............................................................................................................................92
Grading.................................................................................................................................. 104
Favorites.................................................................................................................................108
View by date.........................................................................................................................111
Slide show............................................................................................................................. 112
Mark for upload...................................................................................................................117
Retouch..................................................................................................................................119
83
Playback features
Playback zoom
Pressing the multi selector
image (2).
in full-frame playback mode (1) zooms in on the
Operations during playback zoom
Function
Operation
Adjust the magnification
rate
Press
Move the display position
Press flexible button 3 ( ) to lock the magnification rate
and press
.
To adjust the magnification rate again, press flexible
button 3 ( ) to unlock the magnification rate.
Trim the image
Press flexible button 4 ( ).
Crop (page 85)
Return to full-frame
playback mode
Press flexible button 1 (
.
84
Playback features
Playback zoom
).
Crop
Trim images down only to the parts you need.
• See “ Before editing images (page 88)” for information about restrictions on
editing.
1
Press the multi selector
in on the image.
2
Adjust the magnification rate and display position to display
only the part to trim down.
in full-frame playback mode to zoom
• You can change the magnification rate by pressing
.
• To view a different area of the image, press flexible button 3 ( ) to lock the
. To adjust the magnification rate again,
magnification rate and press
press flexible button 3 ( ) to unlock the magnification rate.
3
Press flexible button 4 ( ).
4
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
85
Playback features
Crop
Thumbnail playback
Pressing the multi selector in full-frame playback mode (1) displays images in
contact sheets of thumbnail images (2).
• While using thumbnail playback mode, press
to select an image, and the
selected image is magnified and displayed at the center of the screen. Select an
image and press , and the selected image is displayed in the full-frame playback
mode.
86
Playback features
Thumbnail playback
Playback menu list
When viewing images in full-frame playback mode, you can press one of the flexible
buttons and use the functions below.
Flexible button
Have fun
with pictures
Description
Exchange messages (page 89)
Allows you to add voice messages to your still images. You can also
record a reply to the added message.
Picture play (page 92)
Allows you to edit your still images using a variety of functions.
Grading (page 104)
Allows you to add grade marks to your images. Graded images are
protected.
You can play back only the images that have grade marks.
Favorites (page 108)
Allows you to add your images to favorites. Images added to favorites
are protected.
You can play back only the images added to favorites.
View
View by date (page 111)
Allows you to play back images by selecting the shooting date from
the calendar.
Slide show (page 112)
Allows you to view images in an automated slide show.
Erase
Erase this picture only
Allows you to delete only the image currently displayed.
Deleting images (page 46)
Erase selected pictures
Allows you to select multiple images and delete them.
Deleting images (page 46)
Erase all pictures
Allows you to delete all images.
Deleting images (page 46)
Settings
Mark for upload (page 117)
Allows you to select still images on the camera’s playback screen to
automatically upload them to a smart device.
87
Playback features
Playback menu list
Flexible button
Settings
Description
Retouch (page 119)
Allows you to copy or rotate images or create a small copy of the
current image.
Camera settings
Allows you to change a number of general settings.
Using the camera settings menu (page 128)
Before editing images
You can use the following image editing functions with this camera.
• " Crop (page 85)"
• [Picture play (page 92)]
• [Small picture (page 120)] in [Retouch]
Images created by editing are saved as files separate from the original images.
File names (page 197)
Images created by editing are saved with the same shooting date and time as the
original images.
Restrictions on image editing
• An image can be edited up to 10 times.
• You may not be able to edit images of a certain size or with certain editing functions.
88
Playback features
Playback menu list
Exchange messages
Allows you to add voice messages to your still images. You can also record a reply to
the added message.
Playback mode
messages
select an image
flexible button 1 (
)
Exchange
• This function is not displayed when [Variety menu (page 136)] is set to [Off].
• Not available when a movie is displayed.
• You can attach up to two messages to each image (one each from [Leave a
message] and [Leave a reply]).
Leave a message
Allows you to add voice messages to your still images.
Playback mode select an image
messages
Record
1
2
Press flexible button 2 (
flexible button 1 (
)
Exchange
[Leave a message]).
• You cannot select this option if the image already has a message attached to it.
Press flexible button 2 ( ) to start recording.
•
•
•
•
You can record for up to about 20 seconds. Do not touch the microphone.
Press flexible button 2 ( ) again to stop recording.
Press flexible button 3 ( ) to play back the message.
You can re-record the message as long as you do not save it by pressing flexible
button 4 (
).
89
Playback features
Exchange messages
3
Press flexible button 4 (
) to save the message.
• For images with recorded messages, is displayed on the playback screen.
• Delete the current message before recording a new message.
Erase recordings (page 91)
Leave a reply
You can record a reply to messages recorded with [Leave a message].
Playback mode select an image
messages
Record
1
2
Press flexible button 3 (
flexible button 1 (
)
Exchange
[Leave a reply]).
• You cannot select this option if the image does not have a message attached to it.
Press flexible button 2 ( ) to start recording.
• Once recording starts, the operations are the same as explained in “
message (page 89)”.
• For images with recorded replies,
Leave a
is displayed on the playback screen.
Play recordings
Playback mode
messages
select an image
flexible button 1 (
90
Playback features
Exchange messages
)
Exchange
1
Press flexible button 3 (
[Play recordings]).
• The camera plays the message. If two messages have been recorded, they are
played back to back.
• Press flexible button 1 ( ) to stop playback.
• Use the multi selector
during playback to adjust playback volume.
Erase recordings
Playback mode
messages
1
select an image
Press flexible button 4 (
flexible button 1 (
)
Exchange
[Erase recordings]).
• If you select an image that has a grade mark, a confirmation dialog is displayed. If
you select
[Yes], the grade is removed, and the screen in step 2 is displayed.
2
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• Only the recording is deleted. If both a message and a reply have been recorded,
they are both deleted.
91
Playback features
Exchange messages
Picture play
Allows you to edit your still images using a variety of functions.
• Not available when a movie is displayed.
• See “ Before editing images (page 88)” for information about restrictions on
editing.
1
2
3
In playback mode, press flexible button 1 ( ).
Press
[Picture play].
Use the multi selector
press flexible button 4 (
to select the desired function and
).
You can select from the following.
Add makeup (page 92)
Arrange pictures (page 94)
Add a fisheye effect (page 95)
Toy camera (page 95)
Soften pictures (page 96)
Add starbursts (page 96)
Add a diorama effect (page 96)
Change colors (page 97)
Highlight colors (page 97)
Decorate (page 98)
Add cartoon effects (page 98)
Stamp (page 99)
Add clarity under water (page 102)
Add a "little planet" effect (page 102)
Curve pictures (page 103)
Add makeup
Detect human faces in images and enhance them.
92
Playback features
Picture play
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
2
)
Picture
to select the face that you want
Use the multi selector
to retouch and press flexible button 4 ( ).
• When only one face is detected, proceed to step 2.
to select the effect, use
Use
and press flexible button 4 ( ).
to select the effect level,
• You can simultaneously apply multiple effects.
3
Adjust or check the settings for all effects before pressing flexible button 4 (
).
[Make faces smaller],
[Make skin prettier],
[Color faces],
[Make
skin less shiny],
[Hide eye bags],
[Make eyes bigger],
[Whiten
eyes],
[Add eye shadow],
[Add mascara],
[Whiten teeth],
[Color
lips],
[Redden cheeks]
• Press flexible button 1 ( ) to return to the screen for selecting a person.
Preview the result and press flexible button 4 (
• To change the settings, press flexible button 1 ( ).
93
Playback features
Picture play
).
Notes about [Add makeup]
• One face can be edited at a time. To add makeup to another face, edit the edited image
again.
• Depending on the direction in which faces are looking, or the brightness of faces, the
camera may be unable to accurately detect faces, or the function may not perform as
expected.
• If no faces are detected, a warning is displayed and the screen returns to the playback
menu.
• Only images captured at an image size of 640 × 480 or larger can be edited.
Arrange pictures
Arrange still images to create a collage.
Playback mode flexible button 1 (
flexible button 4 (
)
select
)
Picture play
use
to
• This function is not displayed when [Variety menu (page 136)] is set to [Off].
1
Use the multi selector
press flexible button 4 (
2
Use
( ).
to select the desired design and
).
to select images (up to four) and press flexible button 2
• Numbers are displayed on the images. The collage is arranged in the order in which
the images were selected.
• The number is displayed or removed each time you press flexible button 2 (
• Press flexible button 3 (
) to cancel all selections.
94
Playback features
Picture play
).
3
4
When you are finished selecting images, press flexible button 4
( ).
Confirm the created collage and press flexible button 4 (
).
Notes about [Arrange pictures]
• Movies cannot be selected.
• Images captured with other cameras cannot be selected.
Image size
The size of the created image is [Small (2 megapixels)] (1600×1200).
Add a fisheye effect
Make an image look as if it were captured with a fisheye lens.
This effect is well-suited for images captured using [Shoot close-ups].
Playback mode select an image flexible button 1 (
to select
flexible button 4 (
)
play use
1
)
Confirm the effect and press flexible button 4 (
Picture
).
Toy camera
Make an image look as if it were shot with a toy camera.
This effect is well-suited for landscapes.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Confirm the effect and press flexible button 4 (
95
Playback features
Picture play
)
Picture
).
Soften pictures
Soften the image by adding a slight blur around the center of the image.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Use the multi selector
press flexible button 4 (
)
Picture
to select the area to be blurred and
).
• To add a slight blur to the entire image, press [
].
Add starbursts
Produce star-like rays of light that radiate outward from bright objects such as
sunlight reflections or street lights.
This effect is suitable for night scenes.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
)
Confirm the effect and press flexible button 4 (
Picture
).
Add a diorama effect
Make an image look like a miniature scene captured in macro mode.
This effect is well-suited for images captured from a high vantage point with the
main subject at the center of the image.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Confirm the effect and press flexible button 4 (
96
Playback features
Picture play
)
Picture
).
Change colors
Adjust image colors.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Use the multi selector
press flexible button 4 (
•
•
•
•
)
Picture
to select the desired setting and
).
1: Use to achieve a vivid, photoprint effect.
2: Save images in black-and-white.
3: Save images in sepia tones.
4: Save images in cyan-blue monochrome.
Highlight colors
Create a black and white image in which only the specified color remains.
Playback mode select an image flexible button 1 (
to select
flexible button 4 (
)
play use
1
Use the multi selector
button 4 ( ).
Picture
to select a color and press flexible
97
Playback features
Picture play
)
Decorate
Add a frame around your images.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Use the multi selector
flexible button 4 ( ).
• Press flexible button 3 (
)
Picture
to select the desired frame and press
) to remove the frame.
Notes about [Decorate]
• The frame is placed on top of the image, therefore a large area of the image is covered
depending on the design of the frame.
• When using borderless printing to print images that you have added frames to, the
frames may not be printed.
Image size
The image size of the edited copy varies depending on the size of the original image.
• When the original image is [Small (2 megapixels)] (1600 × 1200) or larger, the copy is
saved at [Small (2 megapixels)] (1600 × 1200).
• When the original image is smaller than [Small (2 megapixels)] (1600 × 1200), the copy
is saved at the same size as the original.
Add cartoon effects
Make a captured image look like a panel from a comic by drawing lines.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
98
Playback features
Picture play
)
Picture
1
2
3
Use the multi selector
to select the subject to which the
effect will be applied and press flexible button 4 ( ).
• When only one subject is detected, proceed to step 2.
Use
to select an effect and press flexible button 4 (
Confirm the effect and press flexible button 4 (
).
).
• To change the settings, press flexible button 1 ( ).
Notes about [Add cartoon effects]
If no faces or main subjects are detected, a warning is displayed and the screen returns to
the playback menu.
Stamp
Add stamps to an image.
You can enlarge or shrink, move, and rotate the stamps.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
99
Playback features
Picture play
)
Picture
1
2
Use the multi selector
to select the subject to which the
stamp will be applied and press flexible button 4 ( ).
• When only one subject is detected, proceed to step 2.
Use
to select a stamp type.
100
Playback features
Picture play
3
Use
to select a stamp adjustment method and press flexible
button 4 ( ).
•
(enlarge or shrink),
(move), and
(rotate) are available for adjustment.
• In
(enlarge or shrink), press flexible button 2 ( ) or flexible button 3 (
adjust the size of the stamp, and then press flexible button 4 (
).
• In
(move), use
to move the stamp, and press flexible button 4 (
• In
(rotate), press flexible button 2 ( ) or flexible button 3 (
direction of the stamp, and press flexible button 4 (
).
101
Playback features
Picture play
) to
) to adjust the
).
4
Confirm the effect and press flexible button 4 (
).
• To change the settings, press flexible button 1 ( ).
Notes about [Stamp]
You may not be able to adjust stamps depending on their type.
Add clarity under water
The camera compensates for the blues of images captured underwater.
Playback mode select an image flexible button 1 (
to select
flexible button 4 (
)
play use
1
Use the multi selector
flexible button 4 ( ).
)
Picture
to select the effect level and press
Add a "little planet" effect
The camera creates an image of a small planet. This effect is well-suited for images
captured in the landscape orientation.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Confirm the effect and press flexible button 4 (
102
Playback features
Picture play
)
Picture
).
Notes about [Add a "little planet" effect]
•
•
•
•
Lines appear in the image due to image processing.
The expected effect may not be achieved in images captured in the portrait orientation.
Images created by [Add a "little planet" effect] cannot be edited.
Playback zoom cannot be used with images created by [Add a "little planet" effect].
Image size
The size of the created image is 1536×1536 pixels.
Curve pictures
The camera makes the image rounder. This effect is well-suited for images captured
in the landscape orientation.
Playback mode select an image flexible button 1 (
play use
to select
flexible button 4 (
)
1
Confirm the effect and press flexible button 4 (
)
Picture
).
Notes about [Curve pictures]
•
•
•
•
Lines appear in the image due to image processing.
The expected effect may not be achieved in images captured in the portrait orientation.
Images created by [Curve pictures] cannot be edited.
Playback zoom cannot be used with images created by [Curve pictures].
Image size
The size of the created image is 1024×1024 pixels.
103
Playback features
Picture play
Grading
Allows you to add grade marks to your images. Graded images are protected.
You can play back only the images that have grade marks.
Playback mode
flexible button 1 (
)
Grading
• This function is not displayed when [Variety menu (page 136)] is set to [Off].
Grade pictures
Grade images by using
Playback mode
1
[Excellent] or
flexible button 1 (
[Good].
)
Grading
Grade pictures
Use the multi selector
to select an image and press flexible
button 2 ( ) or flexible button 3 ( ).
• Graded images are indicated with grade marks (
and are protected.
or
) on the playback screen,
• You cannot add two grade marks to a single image.
Notes about graded images
Formatting the memory card or the camera's internal memory permanently deletes all
data, including graded images.
104
Playback features
Grading
[Grading]
• Graded images are also added to [Favorites]. Removing the grade also removes the
image from favorites.
Favorites (page 108)
• Grade mark
can be added to up to a total of 999 images that includes the images
added to favorites. Grade mark
can be added to up to a total of 999 images.
Changing or removing grades from individual images
1
2
In step 1 of “ Grade pictures (page 104)”, select the image with
the grade you want to change or remove.
Change or remove the grade.
• Press flexible button 2 (
the selected grade.
• Press flexible button 2 (
selected image.
) or flexible button 3 (
) to change the current grade to
) or flexible button 3 ( ) to remove the grade of the
View graded pictures
You can play back only the images that have grade marks.
Playback mode
pictures
flexible button 1 (
)
105
Playback features
Grading
Grading
View graded
1
2
Press flexible button 2 (
[Good]).
[Excellent]) or flexible button 3 (
• Only images with the grade mark you selected are displayed.
Use the multi selector
• Press flexible button 4 (
to view images.
) to return to full-frame playback mode.
Notes about [View graded pictures]
Images cannot be edited, including changing or removing grades, when they are played
back using [View graded pictures].
Remove all grades
Playback mode
grades
1
flexible button 1 (
Press flexible button 2 (
[Good]).
)
Remove all
[Excellent]) or flexible button 3 (
106
Playback features
Grading
Grading
2
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• The selected grade mark is removed from all images.
107
Playback features
Grading
Favorites
Allows you to add your images to favorites. Images added to favorites are protected.
You can play back only the images added to favorites.
Playback mode
flexible button 1 (
)
Favorites
• This function is not displayed when [Variety menu (page 136)] is set to [On].
Add to favorites
Playback mode
favorites
1
flexible button 1 (
Use the multi selector
flexible button 2 ( ).
)
Favorites
Add to
to select a favorite image and press
• Images added to favorites are displayed with
protected.
on the playback screen, and are
Notes about images added to favorites
Formatting the memory card or the camera's internal memory permanently deletes all
data, including images added to favorites.
[Favorites]
• Grade mark
is added to images that are added to favorites.
Grading (page 104)
Removing the image from favorites also removes the grade.
108
Playback features
Favorites
• Up to a total of 999 images can be added to favorites, which includes graded images.
Removing favorites from individual images
1
2
In step 1 of “Add to favorites (page 108)”, select the image that
you want to remove from favorites.
Press flexible button 2 ( ).
• The selected image is removed from favorites.
View favorites
You can play back only the images added to favorites.
Playback mode
favorites
1
flexible button 1 (
Use the multi selector
• Press flexible button 4 (
)
Favorites
View
to view images.
) to return to full-frame playback mode.
Notes about [View favorites]
Images cannot be edited, including removing from favorites, when they are played back
using [View favorites].
Removing all favorites from images
Playback mode
from favorites
flexible button 1 (
)
109
Playback features
Favorites
Favorites
Remove
1
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• All images added to favorites are removed.
110
Playback features
Favorites
View by date
Allows you to play back images by selecting the shooting date from the calendar.
Playback mode
1
flexible button 2 (
Use the multi selector
press flexible button 4 (
).
)
View by date
to select the desired date and
• A white background of a date indicates that images were recorded on that date.
• Images are selected based on the selected date. The first image captured on that
date is displayed.
• Press flexible button 2 ( ) to display the next month. Press flexible button 3 ( ) to
2
display the previous month.
Use
to view images.
• Press flexible button 4 (
) to return to full-frame playback mode.
Notes about [View by date]
• The 9,000 most recent images can be displayed.
• Images captured when the camera’s date is not set are treated as images captured on
January 1, 2019.
• When movie files are played back, only the first frame of each movie is displayed.
• Images cannot be edited when they are played back using [View by date].
111
Playback features
View by date
Slide show
Allows you to view images in an automated slide show.
Playback mode
flexible button 2 (
)
Slide show
• When movie files are played back, only the first frame of each movie is displayed.
• The background music selected in [Choose a theme (page 116)] is played
during playback.
• The maximum playback time is up to about 30 minutes.
Play back all images
Playback mode
1
flexible button 2 (
Press flexible button 2 (
)
Slide show
[Start]).
• The slide show begins.
Operations during slide show playback
Function
Operation
Change the
displayed image
.
Press the multi selector
Press and hold them down to change images quickly.
End the slide show
Press flexible button 1 (
112
Playback features
Slide show
).
Function
Pause
Operation
Press flexible button 4 ( ).
The operations listed below can be performed while paused.
• End the slide show: Press flexible button 1 ( ).
• Change the displayed image: Press flexible button 2 (
flexible button 3 ( ).
• Resume playback: Press flexible button 4 (
Adjust the
background music
volume
Press
) or
).
.
Play back only graded images or images added to
favorites
Playback mode
pictures
flexible button 2 (
)
Slide show
1
Press flexible button 2 (
favorites]).
[View graded pictures] or
2
Press flexible button 2 (
[Start]).
Choose
[View
• Only graded images or images added to favorites are played back.
• Once the slide show starts, the operations are the same as explained in “
back all images (page 112)”.
113
Playback features
Slide show
Play
Play back only images captured on the same day
Playback mode
pictures
flexible button 2 (
)
Slide show
1
Press flexible button 3 (
[Choose by date]).
2
Use the multi selector
press flexible button 4 (
).
Choose
to select the desired date and
• A white background of a date indicates that images were recorded on that date.
• Press flexible button 2 ( ) to display the next month. Press flexible button 3 ( ) to
3
display the previous month.
Press flexible button 2 (
[Start]).
• Once the slide show starts, the operations are the same as explained in “
back all images (page 112)”.
Play back a series
Images captured using [Shoot at intervals (page 61)] are played back
consecutively.
114
Playback features
Slide show
Play
Playback mode
pictures
1
flexible button 2 (
)
Slide show
Choose
Press flexible button 4 ( [Pick a series]).
• This option can be selected only when images have been captured using [Shoot
2
at intervals].
Press flexible button 2 (
[Choose pictures]).
• The first image in the folder where images captured using [Shoot at intervals] are
3
4
5
saved is displayed.
Use flexible button 2 ( [Next series]) or flexible button 3
( [Previous series]) to select the folder and press flexible button
4 ( ).
Press flexible button 3 (
[Pick a speed]).
Select a playback speed.
• Select [Fast],
[Normal] (default setting), or
115
Playback features
Slide show
[Slow].
6
Press flexible button 4 (
).
7
Press flexible button 2 (
[Start]).
• Once the slide show starts, the operations are the same as explained in “Play back
all images”.
Choose a theme
Select a theme for slide show playback.
Playback mode
theme
flexible button 2 (
)
Slide show
Choose a
• This function is not displayed when [Variety menu (page 136)] is set to [Off].
Select
[Animated] (default setting),
[Pop art], or
116
Playback features
Slide show
[Classic].
Mark for upload
Select still images on the camera’s playback screen to automatically upload them to a
smart device.
Playback mode
1
2
flexible button 4 ( )
Mark for upload
to select an image to upload to the
Use the multi selector
smart device, and press flexible button 2 ( ).
• The selected image is indicated by a check mark.
• A check mark is displayed or removed each time you press flexible button 2 (
• Press flexible button 3 (
) to remove all check marks.
Add check marks to all still images that you want to upload, and
then press flexible button 4 ( ) to confirm the selection.
3
Install the SnapBridge app on the smart device.
4
Use the SnapBridge app to establish a Bluetooth connection
between the camera and smart device.
•
•
5
).
The SnapBridge app (page 165)
Pairing (Bluetooth connection) (page 167)
SnapBridge app
download].
tab
[Auto link]
enable [Auto
• The selected still images are uploaded to the smart device.
Notes about [Mark for upload]
• Still images are uploaded at an image size of up to 2 megapixels.
• Movies cannot be selected for upload.
• To upload still images at their original size or to upload movies, use [Download
pictures] in the SnapBridge app.
117
Playback features
Mark for upload
[Reset all] or the camera settings menu
[Network menu] [Restore default settings], the Mark for upload settings that
you made are canceled.
• When you select the camera settings menu
[Send while shooting]
When you use the camera settings menu [Network menu (page 130)] [Send
while shooting], still images can be sent automatically to a smart device every time they
are captured with the camera.
118
Playback features
Mark for upload
Retouch
Allows you to copy or rotate images or create a small copy of the current image.
Copy
Images can be copied between a memory card and the internal memory.
Playback mode
flexible button 4 ( )
Retouch
Copy
• When a memory card that contains no images is inserted and the camera is
switched to playback mode, [Memory contains no images.] is displayed. In that
case, press a flexible button and select flexible button 3 ( [Retouch]) to select
[Copy].
1
2
3
4
5
Use flexible button 2 ( [Camera to card]) or flexible button 3
( [Card to camera]) to select the copy source and destination.
Use flexible button 2 ( [Selected images]) or flexible button 3
( [All images]) to select the copy method.
• When
[All images] is selected, proceed to step 5.
Use the multi selector
button 2 ( ).
•
•
•
•
to select an image and press flexible
The selected image is indicated by a check mark.
A check mark is displayed or removed each time you press flexible button 2 (
Press flexible button 3 (
) to remove all check marks.
Repeat step 3 to select additional images.
Press flexible button 4 (
).
) to apply image selection.
When the confirmation dialog is displayed, press flexible button
3 ( [Yes]).
• Images are copied.
119
Playback features
Retouch
Notes about [Copy]
• Only files in formats that this camera can record can be copied.
• Operation is not guaranteed with images captured with another make of camera or that
have been modified on a computer.
• The [Grade pictures] and [Add to favorites] settings configured for images are not
copied.
Rotate pictures
Specify the orientation in which saved images are displayed during playback.
Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise.
Playback mode select an image
Rotate pictures
flexible button 4 ( )
1
Press flexible button 2 ( ) or flexible button 3 ( ).
2
Press flexible button 4 (
Retouch
).
• The displayed orientation is applied, and the orientation information is saved with
the image.
Small picture
Create a small copy of images.
Playback mode
Small picture
select an image
flexible button 4 ( )
120
Playback features
Retouch
Retouch
• See “ Before editing images (page 88)” for information about restrictions on
editing.
1
Use flexible button 2 ( ) or flexible button 3 ( ) to select the
desired copy size.
2
Press flexible button 4 (
).
• A new, edited copy is saved as a separate image with a compression ratio of about
1:8.
Notes about [Small picture]
• Images with an image size of 640 × 480 or smaller cannot be edited using [Small
picture].
• Images with an aspect ratio other than 4:3 cannot be edited using [Small picture].
121
Playback features
Retouch
Movies
Recording and playing back movies........................................................................... 123
Operations during movie playback............................................................................. 126
122
Movies
Recording and playing back movies
1
Display the shooting screen.
• Check the remaining amount of movie recording time on the screen.
2
Press the
(
movie-record) button.
• The camera starts recording a movie. The camera focuses in the center of the frame.
3
4
Press the
(
) button to end recording.
Select a movie in full-frame playback mode and press the multi
selector .
• An image with the movie playback guide (1) displayed is a movie.
123
Movies
Recording and playing back movies
Area captured in movies
• The area that is captured in a movie varies depending on [Movie frame size].
• When recording movies while the camera settings menu [Electronic VR] is set
to [Auto], the angle of view (i.e., the area visible in the frame) is narrow compared
to that of still images.
Maximum movie recording time
Individual movie files cannot exceed 29 minutes in length, even when there is
sufficient free space on the memory card for longer recording. The maximum size of
a single movie file is 4 GB.
If a file exceeds 4 GB even when you record for less than 29 minutes, recording ends.
• The remaining recording time for a single movie is displayed on the shooting
screen.
• The actual remaining recording time may vary depending on the movie content,
subject movement, or type of memory card.
• Memory cards with an SD Speed Class rating of 6 (Video Speed Class V6) or faster
are recommended for recording movies. When using a memory card with a lower
Speed Class rating, movie recording may stop unexpectedly.
Memory cards that can be used (page 34)
Notes about camera temperature
• The camera may become hot when recording movies for an extended period of time or
when the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, the camera
will automatically stop recording. The amount of time remaining until the camera stops
recording ( 10s) is displayed and a countdown starts.
After the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
Notes about movie recording
Notes about saving images or movies
The indicator showing the number of exposures remaining or the indicator showing the
remaining recording time flashes, or [Please wait for the camera to finish recording.] is
displayed while images or movies are being saved. Do not open the battery-chamber/
memory card slot cover or remove the battery or memory card while an indicator
is flashing. Doing this could result in loss of data, or in damage to the camera or the
memory card.
Notes about recorded movies
• The optical zoom ratio cannot be changed once recording starts.
• There may be some degradation in image quality when digital zoom is used.
124
Movies
Recording and playing back movies
• The sounds of multi selector operation, autofocus lens drive movement, and aperture
operation when brightness changes may be recorded.
• The following phenomena may be seen on the screen while recording movies. These
phenomena are saved in the recorded movies.
- Banding may occur in images under fluorescent, mercury-vapor, or sodium-vapor
lighting.
- Subjects that move quickly from one side of the frame to the other, such as a moving
train or car, may appear skewed.
- The entire movie image may be skewed when the camera is panned.
- Lighting or other bright areas may leave residual images when the camera is moved.
• Depending on the distance to the subject or the amount of zoom applied, colored
stripes may appear on subjects with repeating patterns (fabrics, lattice windows, etc.)
during movie recording and playback. This occurs when the pattern in the subject and
the layout of the image sensor interfere with each other; it is not a malfunction.
Notes about autofocus for movie recording
For “ Subjects not suitable for autofocus (page 78)”, autofocus may not perform as
expected. Should this occur, try the following:
Frame another subject (positioned at the same distance from the camera as the intended
(
movie-record) button to start
subject) in the center of the frame, press the
recording, and modify the composition.
125
Movies
Recording and playing back movies
Operations during movie playback
While a movie is playing, you can press the multi selector
(1).
to adjust the volume
You can use the flexible buttons to perform the following operations.
Flexible button
Description
Advance
Hold down the button to advance the movie.
Rewind
Hold down the button to rewind the movie.
Pause
Pause playback. The operations listed below can be performed while
paused.
: Advance the movie one frame. Hold down the button for
continuous advancing.
: Rewind the movie one frame. Hold down the button for continuous
rewinding.
: Resume playback.
End
Return to full-frame playback mode.
126
Movies
Operations during movie playback
General camera setup
Using the camera settings menu..................................................................................128
Network menu.....................................................................................................................130
Welcome screen..................................................................................................................134
Date and time...................................................................................................................... 135
Variety menu........................................................................................................................ 136
Brightness............................................................................................................................. 137
Date stamp............................................................................................................................138
Electronic VR........................................................................................................................ 139
AF assist..................................................................................................................................140
Format card...........................................................................................................................141
Format memory.................................................................................................................. 142
Language...............................................................................................................................143
Image comment................................................................................................................. 144
Copyright information......................................................................................................145
Location data display........................................................................................................ 146
Menu background..............................................................................................................147
Charge by computer......................................................................................................... 148
Reset all.................................................................................................................................. 149
Conformity marking.......................................................................................................... 150
Firmware version................................................................................................................ 151
127
General camera setup
Using the camera settings menu
In the camera settings menu, you can change various settings related to the camera.
1
In shooting mode or playback mode, press flexible button 4 ( ).
2
Press flexible button 4 ( [Camera settings]).
3
Select the option whose settings you want to change.
You can set the following options.
Network menu (page 130)
Welcome screen (page 134)
Date and time (page 135)
Variety menu (page 136)
Brightness (page 137)
Date stamp (page 138)
Electronic VR (page 139)
AF assist (page 140)
Format card (page 141)
Format memory (page 142)
Language (page 143)
Image comment (page 144)
Copyright information (page 145)
Location data display (page 146)
Menu background (page 147)
Charge by computer (page 148)
128
General camera setup
Using the camera settings menu
Reset all (page 149)
Conformity marking (page 150)
Firmware version (page 151)
129
General camera setup
Using the camera settings menu
Network menu
Configure settings when establishing a wireless connection between the camera and
a smart device.
Shooting mode or playback mode
Network menu
settings
flexible button 4 ( )
Camera
Connecting to a smart device
When you connect to a smart device, you can upload images captured with the
camera to the smart device or operate the camera remotely with the smart device.
Install the SnapBridge app on the smart device.
The SnapBridge app (page 165)
• The connection methods are as follows.
- Bluetooth connection: You can automatically upload still images (uploaded at
an image size of up to 2 megapixels). When establishing a Bluetooth connection
for the first time, use the network menu [Connect to smart device] to pair
the camera and smart device.
You can also switch to a Wi-Fi connection after establishing a Bluetooth
connection.
Pairing (Bluetooth connection) (page 167)
- Wi-Fi connection: You can download still images (2 megapixels or original size)
and movies to the smart device or perform remote photography.
Using [Download pictures]/[Remote photography] (Wi-Fi connection) (page
171)
• For details about the SnapBridge app, see the online help for the SnapBridge app
(https://nikonimglib.com/snbr/onlinehelp/en/index.html).
Network menu list
Flexible button
Airplane mode
Connect to smart device
Description
Select [On] to turn off all wireless connections.
Pair when connecting to a smart device through
Bluetooth for the first time.
Pairing (Bluetooth connection) (page 167)
130
General camera setup
Network menu
Flexible button
Send
while
shooting
Still images
Description
When set to [On], still images can be sent
automatically to a smart device connected through
Bluetooth every time they are captured.
• To send automatically, the SnapBridge app must
tab
also be configured. SnapBridge app
[Auto link] enable [Auto download].
• Still images are uploaded at an image size of up
to 2 megapixels. To upload at their original size,
use the SnapBridge app [Download
pictures].
• If you use the playback menu [Settings]
[Mark for upload (page 117)], you can select
still images on the camera’s playback screen to
automatically upload them to a smart device.
Wi-Fi
Upload
(photos)
Set the conditions for automatically sending still
images.
Network
settings
[SSID]: Set a 1- to 32-character alphanumeric SSID.
Inputting characters (page 132)
[Auth./encryp.]: Select whether to encrypt
communications. Communications are not
encrypted when [Open] is selected.
[Password]: Set an 8- to 36-character alphanumeric
password.
Inputting characters (page 132)
• To protect your privacy, we recommend that you
change the password regularly.
[Channel]: Select the channel used for the Wi-Fi
connection. If the communication quality is poor or
the image upload speed is extremely slow when
using a Wi-Fi connection, try changing the channel.
Current
settings
Bluetooth
Connection
Confirm the current [Network settings] in a list.
Select [Enable] or [Disable] for Bluetooth
communication.
131
General camera setup
Network menu
Flexible button
Bluetooth
Paired
devices
Description
Display smart devices that have been paired.
You can change the smart device to connect with,
or delete paired smart devices.
• This camera can be paired with up to five smart
devices (only one device can be connected at a
time).
off
Send while
Select [On] or [Off] to set whether the camera
communicates with the smart device when the
camera is off or in standby mode ( The auto off
function (page 44)).
• During communication through [Send while
off], the power-on lamp turns on even though
the camera is off.
Restore default settings
Restore all network menu settings to their default
values.
Bluetooth communication indicator and Wi-Fi communication indicator
on the shooting screen
• About the Bluetooth communication indicator
- When the camera is connected to a smart device via Bluetooth, is displayed.
- When the camera is waiting for the connection to a smart device to be reestablished,
flashes. It also flashes when Bluetooth communication is disconnected while
uploading images.
• About the Wi-Fi communication indicator
- When the camera is preparing to connect to a smart device via Wi-Fi,
flashes.
- When the camera is connected to a smart device via Wi-Fi,
is displayed.
Inputting characters
132
General camera setup
Network menu
• Use the multi selector
to select alphanumeric characters on the
keyboard (1). Press flexible button 3 (
) to enter the selected character in the
text field (2) and move the cursor to the next space.
• To move the cursor in the text field, select
or
on the keyboard, and press
flexible button 3 (
).
• To delete one character, press flexible button 2 ( ).
• To apply the setting, select
on the keyboard and press flexible button 3 (
).
133
General camera setup
Network menu
Welcome screen
Configure the welcome screen that is displayed when you turn on the camera.
Shooting mode or playback mode
Welcome screen
settings
flexible button 4 ( )
Camera
• This function is not displayed when [Variety menu (page 136)] is set to [Off].
Flexible
button
Description
Off
Does not display the welcome screen.
On
Displays an animated welcome screen.
The characters and background that are displayed change according to
how often you use the camera, how many images you have taken with
the camera, etc.
On:
Photo
Displays a captured image as the welcome screen.
• An image selection screen is displayed. Use the multi selector
to
select an image and press flexible button 4 (
) to register it.
• The welcome screen stays the same even if you delete the original
image because the registered image is saved in the camera.
• An image cannot be selected if the image size is extremely small after
the small picture or crop function is applied.
134
General camera setup
Welcome screen
Date and time
Set the camera clock.
Shooting mode or playback mode
Date and time
settings
Flexible
button
Date
format
flexible button 4 ( )
Camera
Description
Select [Year/Month/Day], [Month/Day/Year], or [Day/Month/Year].
Date and
time
• Select a field: Press the multi selector
.
• Edit the date and time: Press
.
• Apply the setting: Select the minute setting and press flexible button
4(
).
• Set daylight saving time: Press flexible button 3 (
) to display
on
the screen and enable daylight saving time. To disable daylight saving
time, press flexible button 3 ( ) again.
135
General camera setup
Date and time
Variety menu
Allows you to set whether to use all of the camera’s functions.
Shooting mode or playback mode
Variety menu
settings
flexible button 4 ( )
Flexible button
Description
Enables use of all functions.
On
Some functions are restricted as follows.
Off
When
Camera
[Off] is selected, the following functions are disabled.
• Shooting functions
[Decorate]
[Change sounds] [Turn sounds on or off]
[Choose a size] [Movie frame size] [Small (old-fashioned)]
• Playback functions
[Exchange messages]
[Picture play] [Arrange pictures]
[Slide show] [Choose a theme]
• Camera settings
- [Welcome screen]
The following functions change.
• You will not be able to select sounds by using
shutter sound] and [Pick a button sound]
•
[Grading] changes to [Favorites]
136
General camera setup
Variety menu
[Change sounds]
[Pick a
Brightness
Adjust the brightness.
Shooting mode or playback mode
Brightness
settings
flexible button 4 ( )
Camera
The default setting is [3].
• Use the multi selector
button 4 (
).
to select the desired brightness and press flexible
137
General camera setup
Brightness
Date stamp
The shooting date and time can be stamped on images when shooting.
Shooting mode or playback mode
Date stamp
settings
flexible button 4 ( )
Flexible button
Date
Date and time
Off
(default setting)
Camera
Description
Date is stamped on images.
Date and time are stamped on images.
Date and time are not stamped on images.
Notes about [Date stamp]
• Stamped dates and times form a permanent part of image data and cannot be deleted.
The date and time cannot be stamped on images after they have been captured.
• The date and time cannot be stamped on movies.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
138
General camera setup
Date stamp
Electronic VR
Select the electronic VR (vibration reduction) setting used when shooting.
Shooting mode or playback mode
Electronic VR
settings
flexible button 4 ( )
Flexible button
Auto
Camera
Description
In the following conditions, the effects of camera shake are reduced
when shooting.
• When the [Flash] is set to [Flash off]
• When the shutter speed is slow
• When the subject is dark
Vibration reduction is always applied during movie recording.
Electronic VR is disabled.
Off
(default setting)
Notes about [Electronic VR]
• Electronic VR is disabled while the flash is used.
• If the exposure period exceeds a certain period of time, electronic VR will not function.
• Even when [Electronic VR] is set to [Auto], depending on the shooting conditions
automatically selected by the camera when using [Point and shoot] mode, the
electronic VR may not function.
• The effectiveness of electronic VR decreases as camera shake increases.
• Images may contain noise.
• This function may not be available to use in combination with other functions.
Functions that cannot be used simultaneously when shooting (page 81)
139
General camera setup
Electronic VR
AF assist
Allows you to enable or disable the AF-assist illuminator.
Shooting mode or playback mode
AF assist
settings
flexible button 4 ( )
Flexible
button
Auto
(default
setting)
Camera
Description
The AF-assist illuminator automatically lights up when you press the
shutter-release button under dim lighting.
• The illuminator has a range of about 1.9 m (6 ft 2 in.) at the maximum
wide-angle position and about 1.7 m (5 ft 6 in.) at the maximum
telephoto position.
• Note that for some settings, the AF-assist illuminator may not light.
Off
The AF-assist illuminator does not light.
140
General camera setup
AF assist
Format card
Use this option to format a memory card.
Shooting mode or playback mode
Format card
settings
flexible button 4 ( )
Camera
Formatting the memory cards permanently deletes all data. Data that has
been deleted cannot be recovered. Make sure to save important images to a
computer before formatting.
To start formatting, press flexible button 3 ( [Format]) on the screen that is
displayed.
• Do not turn the camera off or open the battery-chamber/memory card slot cover
during formatting.
• You may not be able to select this setting while a wireless connection is
established.
Notes about [Format card]
You cannot format while image lock is set. Remove image lock.
Restricting image deletion (image lock) (page 47)
141
General camera setup
Format card
Format memory
Use this option to format the internal memory.
Shooting mode or playback mode
Format memory
settings
flexible button 4 ( )
Camera
Remove the memory card from the camera in advance.
Formatting the internal memory permanently deletes all data. Data that has
been deleted cannot be recovered. Make sure to save important images to a
computer before formatting.
To start formatting, press flexible button 3 ( [Format]) on the screen that is
displayed.
• Do not turn the camera off or open the battery-chamber/memory card slot cover
during formatting.
• You may not be able to select this setting while a wireless connection is
established.
Notes about [Format memory]
You cannot format while image lock is set. Remove image lock.
Restricting image deletion (image lock) (page 47)
142
General camera setup
Format memory
Language
Select a language for display of camera menus and messages.
Shooting mode or playback mode
Language
settings
flexible button 4 ( )
143
General camera setup
Language
Camera
Image comment
Allows you to attach a comment that was previously registered to images that will be
captured.
Shooting mode or playback mode
Image comment
settings
flexible button 4 ( )
Camera
• You can imprint the attached comment to images that will be sent to a smart
device using the SnapBridge app. You must configure the SnapBridge app in
advance. For details, see the online help for the SnapBridge app (https://
nikonimglib.com/snbr/onlinehelp/en/index.html).
• You can also check the attached comment using ViewNX-i metadata.
Flexible button
Attach
comment
Description
A comment registered with [Input comment] is attached to
images.
• When you press flexible button 2 (
[On]), the setting is
enabled, and the comment will be attached to the images
captured afterwards.
Input
comment
You can register a comment of up to 36 alphanumeric characters.
Inputting characters (page 132)
Notes about [Image comment]
Image comments cannot be attached to movies.
Image comments display
Image comments are not displayed even if images are played back on the camera.
144
General camera setup
Image comment
Copyright information
Allows you to attach the copyright information that was previously registered to
images that will be captured.
Shooting mode or playback mode flexible button 4 ( )
Copyright information
settings
Camera
• You can imprint the attached copyright information to images that will be sent to
a smart device using the SnapBridge app. You must configure the SnapBridge app
in advance. For details, see the online help for the SnapBridge app (https://
nikonimglib.com/snbr/onlinehelp/en/index.html).
• You can also check the attached copyright information using ViewNX-i metadata.
Flexible button
Attach
copyright info
Description
Copyright information registered with [Artist] and [Copyright] is
attached to images.
• When you press flexible button 2 (
[On]), the setting is enabled,
and the copyright information will be attached to the images
captured afterwards.
Artist
You can register an artist name of up to 36 alphanumeric characters.
Inputting characters (page 132)
Copyright
You can register a copyright owner name of up to 54 alphanumeric
characters.
Inputting characters (page 132)
Notes about [Copyright information]
• Copyright information cannot be attached to movies.
• To prevent illegal use of artist names and copyright owner names when lending or
transferring ownership of the camera, make sure to disable the [Attach copyright info]
setting. Also, make sure that the artist name and copyright owner name are blank.
• Nikon is not responsible for any kind of trouble or damage resulting from the use of
[Copyright information].
Copyright information display
• Copyright information is not displayed even if images are played back on the camera.
• If you input both [Artist] and [Copyright], only the copyright owner name is imprinted
to images in the SnapBridge app.
145
General camera setup
Copyright information
Location data display
Display the location information obtained from a smart device.
Shooting mode or playback mode flexible button 4 ( )
Location data display
settings
Camera
Obtaining location information from a smart device
1
Install the SnapBridge app on the smart device.
•
2
•
3
The SnapBridge app (page 165)
Use the SnapBridge app to establish a Bluetooth connection
between the camera and smart device.
Pairing (Bluetooth connection) (page 167)
SnapBridge app
location data].
tab
[Auto link]
• When obtaining location information,
enable [Synchronize
is displayed on the shooting screen of the
camera.
• When is displayed, location information is recorded on captured images.
• To stop obtaining location information, disable [Synchronize location data].
146
General camera setup
Location data display
Menu background
Select a background design for the screen.
Shooting mode or playback mode
Menu background
settings
flexible button 4 ( )
Camera
The default setting is [1].
• Use the multi selector
to select the desired design and press flexible button 4
).
(
• To restore the default setting, press flexible button 3 (
).
147
General camera setup
Menu background
Charge by computer
Allows you to set whether or not the battery in the camera is charged when the
camera is connected to a computer.
Shooting mode or playback mode
settings
Charge by computer
flexible button 4 ( )
Flexible button
Auto
(default
setting)
Off
Camera
Description
When the camera is connected to a computer that is running (
Transferring images to a computer with ViewNX-i (page 160)), the
battery inserted into the camera is automatically charged using
power supplied by the computer.
The battery inserted into the camera is not charged when the camera
is connected to a computer.
Notes about charging with a computer
• When connected to a computer, the camera turns on and starts charging. If the camera
is turned off, charging stops.
• About 2 hours and 30 minutes are required to charge a fully exhausted battery. Charging
time increases when images are transferred while the battery is charging.
• The camera turns off automatically if there is no communication with the computer for
30 minutes after the battery has finished charging.
When the charge lamp quickly flashes
Charging cannot be performed, possibly due to one of the reasons described below.
• The ambient temperature is not suited to charging. Charge the battery indoors with an
ambient temperature of 5°C to 35°C (41°F to 95°F).
• The USB cable is not connected correctly, or the battery is faulty. Make sure the USB
cable is connected correctly or replace the battery if necessary.
• The computer is in sleep mode and is not supplying power. Wake up the computer.
• The battery cannot be charged because the computer cannot supply power to the
camera due to the computer’s settings or its specifications.
148
General camera setup
Charge by computer
Reset all
Allows you to reset the camera’s settings to their default values.
Shooting mode or playback mode
Reset all
settings
When flexible button 3 (
their default values.
flexible button 4 ( )
Camera
[Reset]) is selected, the camera’s settings are restored to
• The network menu settings are also restored to their default values.
• Some settings, such as [Date and time] or [Language], are not reset.
• You may not be able to select this setting while a wireless connection is
established.
Resetting file numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in the
internal memory before selecting [Reset all].
149
General camera setup
Reset all
Conformity marking
View some of the conformity markings that the camera complies with.
Shooting mode or playback mode
Conformity marking
settings
flexible button 4 ( )
150
General camera setup
Conformity marking
Camera
Firmware version
View the current camera firmware version.
Shooting mode or playback mode
Firmware version
settings
flexible button 4 ( )
Camera
• You may not be able to select this setting while a wireless connection is
established.
151
General camera setup
Firmware version
Connecting the camera to a TV,
printer, or computer
Viewing images on a TV...................................................................................................153
Printing images with a printer....................................................................................... 155
Transferring images to a computer..............................................................................160
152
Connecting the camera to a TV, printer, or computer
Viewing images on a TV
You can connect the camera to a TV with a commercially available HDMI cable to
view images and movies captured with the camera on the TV.
Notes about connecting to a TV
• Make sure to turn the camera off before openning the cover. Check there are no water
droplets. If there are water droplets, wipe the camera with a soft dry cloth.
• Make sure that the camera battery is sufficiently charged. If the EH-62G AC Adapter
(available separately) is used, this camera can be powered from an electrical outlet. Do
not, under any circumstances, use an AC adapter other than the EH-62G. Failure to
observe this precaution could result in overheating or in damage to the camera.
• For information about the connection methods and subsequent operations, refer to the
documentation included with the TV in addition to this document.
1
2
Turn off the camera.
Use a commercially available HDMI cable to connect the
camera’s HDMI micro connector (Type D) and the TV’s HDMI
input port.
• Check the shape and direction of the plugs and do not insert or remove the plugs
at an angle.
3
Set the TV’s input to external input.
• See the documentation provided with your TV for details.
153
Connecting the camera to a TV, printer, or computer
Viewing images on a TV
4
Press and hold down the
to turn on the camera.
(shooting/playback mode) button
• Images are displayed on the TV.
• The camera screen does not turn on.
154
Connecting the camera to a TV, printer, or computer
Viewing images on a TV
Printing images with a printer
Users of PictBridge-compatible printers can connect the camera directly to the
printer and print images without using a computer.
Connecting to a PictBridge-compatible printer
Notes about connecting to a printer
• Make sure to turn the camera off before openning the cover. Check there are no water
droplets. If there are water droplets, wipe the camera with a soft dry cloth.
• Make sure that the camera battery is sufficiently charged. If the EH-62G AC Adapter
(available separately) is used, this camera can be powered from an electrical outlet. Do
not, under any circumstances, use an AC adapter other than the EH-62G. Failure to
observe this precaution could result in overheating or in damage to the camera.
• Operation is not guaranteed if the camera is connected to the printer via a USB hub.
• For information about the connection methods and subsequent operations, refer to the
documentation included with the printer in addition to this document.
1
2
3
Turn on the printer.
Turn off the camera.
Connect the camera to the printer using the USB cable.
• Check the shape and direction of the plugs and do not insert or remove the plugs
at an angle.
155
Connecting the camera to a TV, printer, or computer
Printing images with a printer
4
The camera is automatically turned on.
• The [PictBridge] startup screen is displayed on the camera screen, followed by the
[Print selection] screen.
If the PictBridge startup screen is not displayed
When the camera settings menu [Charge by computer] is set to [Auto], it may be
impossible to print images with direct connection of the camera to some printers. If the
PictBridge startup screen is not displayed after the camera is turned on, turn the camera off
and disconnect the USB cable. Set [Charge by computer] to [Off] and reconnect the
camera to the printer.
Printing images one at a time
1
Use the multi selector
flexible button 4 ( ).
2
Press flexible button 3 (
3
Use
to set the desired number of copies (up to 9) and press
flexible button 4 ( ).
to select the desired image and press
[Copies]).
156
Connecting the camera to a TV, printer, or computer
Printing images with a printer
4
Press flexible button 4 ( [Paper size]).
5
Use
to select the paper size and press flexible button 4 (
).
• To print with the paper size setting configured on the printer, select [Default].
• The paper size options available on the camera vary depending on the printer that
6
you use.
Press flexible button 2 (
[Start print]) to start printing.
Printing multiple images
1
When the [Print selection] screen is displayed, press flexible
button 3 (
).
157
Connecting the camera to a TV, printer, or computer
Printing images with a printer
2
Press flexible button 4 ( [Paper size]).
3
Use
to select the paper size and press flexible button 4 (
).
• To print with the paper size setting configured on the printer, select [Default].
• The paper size options available on the camera vary depending on the printer that
4
you use.
Press flexible button 2 or 3 to select the print method.
•
5
[Print selection]: Select images (up to 99) and the number of copies (up to 9)
of each.
•
[Print all images]: One copy each of all images saved in the internal memory,
or on the memory card, is printed. Proceed to step 6.
Select images (up to 99) and the number of copies (up to 9) of
each.
• Use the multi selector
to select images, and use flexible button 2 ( ) or
flexible button 3 ( ) to specify the number of copies to be printed.
• Images selected for printing are indicated by a check mark and the number of
copies to be printed. To cancel the print selection, set the number of copies to 0.
• Press flexible button 4 (
) when setting is complete.
158
Connecting the camera to a TV, printer, or computer
Printing images with a printer
6
When the screen for confirming the number of print copies is
displayed, press flexible button 2 ( [Start print]) to start
printing.
159
Connecting the camera to a TV, printer, or computer
Printing images with a printer
Transferring images to a computer
You can transfer images and movies to a computer for viewing and editing.
Installing ViewNX-i
ViewNX-i is Nikon software that enables you to transfer images and movies to your
computer for viewing and editing.
To install ViewNX-i, download the latest version of the ViewNX-i installer from the
following website and follow the on-screen instructions to complete installation.
https://downloadcenter.nikonimglib.com
For system requirements and other information, see the Nikon website for your
region.
Transferring images to a computer with ViewNX-i
For more information about using ViewNX-i, refer to ViewNX-i help.
• The items displayed on your computer screen may change when you update the
version of your operating system or software.
Notes about connecting the camera to a computer
• Make sure to turn the camera off before openning the cover. Check there are no water
droplets. If there are water droplets, wipe the camera with a soft dry cloth.
• Make sure that the camera battery is sufficiently charged. If the EH-62G AC Adapter
(available separately) is used, this camera can be powered from an electrical outlet. Do
not, under any circumstances, use an AC adapter other than the EH-62G. Failure to
observe this precaution could result in overheating or in damage to the camera.
• Operation is not guaranteed if the camera is connected to the computer via a USB hub.
• For information about the connection methods and subsequent operations, refer to the
documentation included with the computer in addition to this document.
1
When connecting the camera to a computer, disconnect all USBpowered devices from the computer.
• Connecting the camera and other USB-powered devices to the same computer
simultaneously may cause a camera malfunction or excessive power supply from
the computer, which could damage the camera or memory card.
160
Connecting the camera to a TV, printer, or computer
Transferring images to a computer
2
Prepare a memory card that contains images.
• You can use any of the methods below to transfer images from the memory card to
a computer.
- SD memory card slot/card reader: Insert the memory card into the card slot of
your computer or the card reader (commercially available) that is connected to
the computer.
- Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the USB
cable.
The camera automatically turns on.
To transfer images that are saved in the camera’s internal memory, remove the
memory card from the camera before connecting it to the computer.
• Check the shape and direction of the plugs and do not insert or remove the plugs
at an angle.
3
If a message is displayed prompting you to choose a program,
select Nikon Transfer 2.
•
Selecting a program to start (page 162)
• If the memory card contains a large number of images, it may take a while for Nikon
4
Transfer 2 to start. Wait until Nikon Transfer 2 starts.
After Nikon Transfer 2 starts, click [Start Transfer].
• Image transfer begins. When image transfer is complete, ViewNX-i starts and the
transferred images are displayed.
161
Connecting the camera to a TV, printer, or computer
Transferring images to a computer
5
Terminate the connection.
• If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the
memory card and then remove the memory card from the card reader or card slot.
• If the camera is connected to the computer, turn the camera off and disconnect the
USB cable.
Selecting a program to start
If you refer to “ Transferring images to a computer with ViewNX-i (page 160)” to
connect the camera to a computer and a message is displayed prompting you to
select a program, follow the steps below to select Nikon Transfer 2.
In Windows 7
1
Under [Import pictures and videos], click [Change program].
2
3
Select Nikon Transfer 2 in the displayed dialog and click [OK].
Double-click the Nikon Transfer 2 icon.
In Windows 10 or Windows 8.1
1
Click the dialog and then click [Import File/Nikon Transfer 2].
162
Connecting the camera to a TV, printer, or computer
Transferring images to a computer
In OS X or macOS
If Nikon Transfer 2 does not automatically start, launch the [Image Capture]
application that comes bundled with Mac while the camera and your computer are
connected, and select Nikon Transfer 2 as the default application to open when the
camera is connected to your computer.
163
Connecting the camera to a TV, printer, or computer
Transferring images to a computer
Connecting to a smart device
(SnapBridge)
The SnapBridge app.......................................................................................................... 165
Connecting the camera and a smart device.............................................................167
If the camera cannot be connected or images cannot be uploaded.............. 173
164
Connecting to a smart device (SnapBridge)
The SnapBridge app
When you install the SnapBridge app and establish a wireless connection between a
SnapBridge-supported camera and a smart device, you can upload images captured
with the camera to the smart device or operate the camera remotely with the smart
device.
• Procedures are described using the SnapBridge app Version 2.5.
• Use the latest versions of the SnapBridge app and the camera’s firmware.
The functions that can be used and the operating procedures may vary depending
on the versions of the SnapBridge app and camera’s firmware or the OS of the
smart device.
• See the documentation provided with the smart device for information on how to
use it.
Installing the SnapBridge app
Download the app from the Apple App Store® for iOS, and from Google Play™ for
Android™.
The “SnapBridge 360/170 app” cannot be used with this camera.
Screens in the SnapBridge app
1: You can view the online help, as well as configure the app’s settings.
2: Primarily perform connection settings for smart devices and cameras.
3: You can play back images uploaded from the camera.
For detailed explanations about the SnapBridge app
See the SnapBridge app online help.
165
Connecting to a smart device (SnapBridge)
The SnapBridge app
https://nikonimglib.com/snbr/onlinehelp/en/index.html
166
Connecting to a smart device (SnapBridge)
The SnapBridge app
Connecting the camera and a smart device
Pairing (Bluetooth connection)
When you connect to a smart device through a Bluetooth connection, you can use
auto link features (automatic download of still images, time information
synchronization, location data synchronization).
When connecting through Bluetooth for the first time, pair the camera with the
smart device.
• Insert a memory card with sufficient free space into the camera.
• Make sure that the remaining battery levels of the camera and smart device are
sufficient.
• Enable Bluetooth on the smart device.
1
Camera: Camera settings menu in [ Network menu (page
130)], press flexible button 3 ( [Connect to smart device]).
2
Camera: Confirm that the dialog below is displayed.
Smart device: Launch the SnapBridge app and tap [Connect to
camera].
• When the list of camera categories is displayed on the smart device, tap the
category of this camera.
• If you tapped [Skip] without connecting the camera when launching the
SnapBridge app for the first time, tap the
proceed to step 3.
167
Connecting to a smart device (SnapBridge)
Connecting the camera and a smart device
tab
[Connect to camera] and
3
Smart device: Tap the name of the camera you want to pair.
• For iOS, if a screen explaining the procedure is displayed after you tap the camera
4
name, confirm the details and tap [Understood]. Tap the camera name again
when the screen for selecting an accessory is displayed (it may take some time for
the camera name to be displayed).
Camera/smart device: Confirm that the same number is
displayed.
• For iOS, the number may not be displayed on the smart device depending on the
5
OS version. In this case, proceed to step 5.
Camera: Press flexible button 4 (
Smart device: Tap [PAIR].
).
• The actual name of the [PAIR] option may vary depending on the smart device.
• When pairing for the first time, set the auto link function using the smart device
screen.
168
Connecting to a smart device (SnapBridge)
Connecting the camera and a smart device
6
Finish the pairing.
• Camera: Press flexible button 4 ( ).
• Smart device: Tap [OK].
• If you pair when connecting for the first time, the camera can connect to the smart
device through Bluetooth from the next time without you having to perform the
procedure above.
Automatic download of still images
While connected through Bluetooth, you can use the following features to
automatically download still images to a smart device. Still images are uploaded at an
image size of up to 2 megapixels.
tab [Auto link] enable [Auto download] in advance.
SnapBridge app
Setting procedure
Description
Camera settings menu
[Network menu] [Send while
shooting] [Still images]
Automatically upload still images to a smart
device every time they are captured.
Camera playback menu
[Settings] [Mark for upload]
Select still images on the camera’s playback
screen, and then automatically upload them to a
smart device.
• To upload still images at their original size or to upload movies, switch to a Wi-Fi
connection and use [Download pictures].
Using [Download pictures]/[Remote photography] (Wi-Fi connection) (page
171)
169
Connecting to a smart device (SnapBridge)
Connecting the camera and a smart device
Tips for pairing
If the camera and smart device cannot be paired
• Confirm that the settings in the camera settings menu
[Network menu] are
configured as follows.
- [Airplane mode]: [Off]
- [Bluetooth] [Connection]: [Enable]
• If the camera displays [Could not connect.], press flexible button 3 (
[Reconnect])
and repeat the procedure from step 2 to perform the pairing again. Press flexible button
4 ( [Cancel]) to cancel the pairing.
• You may be able to finish the pairing successfully by closing the SnapBridge app
completely, turning the camera off and then on again, and then performing the
procedure in “ Pairing (Bluetooth connection) (page 167)”.
• For iOS, you may not be able to pair the camera with the smart device if the camera is
registered as a device. Delete the registered device (camera name) in the iOS settings
app.
Disconnecting and reconnecting the Bluetooth connection
Use either of the following methods to switch the setting.
[Network menu] [Airplane mode] (You can set it to [On]
to turn off all communication functions in places where wireless communication is
prohibited.)
• Camera settings menu [Network menu] [Bluetooth] [Connection]
• Camera settings menu
Unpairing
tab
[Forget camera] Camera you want to unpair
SnapBridge app
tap [Yes] (during a Wi-Fi connection, tap
, and then tap [Yes]).
For iOS, then tap [Go] and delete the registered device (camera name) in the iOS settings
app.
170
Connecting to a smart device (SnapBridge)
Connecting the camera and a smart device
Using [Download pictures]/[Remote photography] (WiFi connection)
When the camera is connected to a smart device through a Wi-Fi connection, you
can use the following features in the SnapBridge app.
Option
Description
Download pictures
Download still images (2 megapixels or original size) and movies
to a smart device.
Remote
photography
Operate the camera remotely using a smart device to capture still
images.
• Insert a memory card with sufficient free space into the
camera.
• If you select [Download pictures] or [Remote photography] in the
tab of
the SnapBridge app when connected through Bluetooth, the Wi-Fi connection
dialog will be displayed. Tap [OK] to switch to a Wi-Fi connection.
To return to the Bluetooth connection from the Wi-Fi connection, SnapBridge app
tab
tap [Yes].
If the [Camera and Wi-Fi connection] screen is displayed in iOS
Depending on the iOS version, the [Camera and Wi-Fi connection] screen may be
displayed after you tap [OK] on the Wi-Fi connection dialog.
• Write down the camera SSID and password displayed on the screen.
• When you tap [View options], the iOS settings app launches. After tapping [Settings],
tap [Wi-Fi], and select the SSID you wrote down. When connecting for the first time,
input the password.
For details about operation, see the online help for the SnapBridge app (https://
nikonimglib.com/snbr/onlinehelp/en/index.html).
171
Connecting to a smart device (SnapBridge)
Connecting the camera and a smart device
SSID and password
You can confirm or change the SSID or password in the camera settings menu
[Network menu] [Wi-Fi] [Network settings].
172
Connecting to a smart device (SnapBridge)
Connecting the camera and a smart device
If the camera cannot be connected or images
cannot be uploaded
• When the camera is being operated, you may be unable to upload images or
uploading may be canceled, or you may be unable to perform remote
photography using the SnapBridge app.
• The issue may be solved by trying one or all of the following operations.
• - Turn the camera off and then on again.
- Switch the tab of the SnapBridge app.
- Close the SnapBridge app completely and then launch it again.
- Restart the smart device.
- Unpair once and then pair again.
Unpairing (page 170)
173
Connecting to a smart device (SnapBridge)
If the camera cannot be connected or images cannot be uploaded
If there is a problem
Troubleshooting................................................................................................................. 175
Error messages.................................................................................................................... 185
174
If there is a problem
Troubleshooting
If the camera fails to function as expected, check the following before consulting
your retailer or Nikon-authorized service representative.
• Turning off the camera once may solve the issue.
• If you cannot find a relevant entry, also check “ Error messages (page 185)” or the
Nikon website for your region.
Power, display, settings
The camera is on but does not respond.
• Wait for recording to end.
• If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert the battery or batteries or, if
you are using an AC adapter, disconnect and reconnect the AC adapter.
Note that although any data currently being recorded will be lost, data that have
already been recorded will not be affected by removing or disconnecting the
power source.
The camera cannot be turned on.
The battery is exhausted.
Charging the battery (page 36),
The battery (page 192)
The camera turns off without warning.
• The camera automatically turns off to save power (auto off function).
The auto off function (page 44)
• The camera and battery may not work properly at low temperatures.
The battery (page 192)
• The inside of the camera or the battery has become hot. Leave the camera off until
the inside of the camera has cooled, and then try turning it on again.
The monitor is blank.
• The camera is off.
Camera setup (page 38)
• The battery is exhausted.
Charging the battery (page 36), The battery (page 192)
• The camera automatically turns off to save power (auto off function).
The auto off function (page 44)
175
If there is a problem
Troubleshooting
• The camera is connected to a TV or computer.
• The camera is shooting while [Choose a style] is set to [Shoot at intervals].
• The camera is shooting while [Choose a style] is set to [Add light trails].
The camera becomes hot.
The camera may become hot when used for an extended period of time such as to
shoot movies, or when used in a hot environment; this is not a malfunction.
The battery inserted in the camera cannot be charged.
• Confirm all connections.
Charging the battery (page 36)
• The camera may not charge when connected to a computer for any of the reasons
described below.
- [Charge by computer (page 148)] is set to [Off].
- If the camera is turned off, charging stops.
- Battery charging is not possible if the camera’s display language and date and
time have not been set, or the date and time were reset after the camera’s clock
battery was exhausted. Use the Charging AC Adapter to charge the battery.
- Battery charging may stop when the computer enters sleep mode.
- Depending on the computer specifications, settings, and status, battery
charging may not be possible.
The monitor is hard to see.
• Adjust the [Brightness (page 137)].
• The surroundings are too bright. Move to a darker place.
flashes on the screen.
• The camera clock has not been set. Set the date and time in [Date and time
(page 135)].
• If the camera clock has not been set, images and movies saved before the clock is
set are dated “00/00/0000 00:00” and “01/01/2019 00:00” respectively. The shooting
date and time is not displayed during playback.
Date and time of recording are not correct.
Set the date and time in [Date and time (page 135)]. The camera clock is not as
accurate as ordinary watches or clocks. Periodically compare the time of the camera
clock with that of a more accurate timepiece and reset as required.
176
If there is a problem
Troubleshooting
[Date stamp] not available.
The camera clock has not been set. Set the date and time in [Date and time (page
135)].
Screen for setting date and time is displayed when the camera
is turned on.
The camera settings reset.
The clock battery is exhausted; all settings were restored to their default values.
Configure the camera settings again.
The internal clock battery is used to power the camera clock and to retain certain
settings. Charging time of the clock battery takes about 10 hours when you insert the
battery into the camera or connect the AC adapter (available separately) to the
camera, and the clock battery operates for several days even after the camera battery
is removed.
Cannot select [Format card] or [Format memory].
• You cannot format while image lock is set. Remove image lock.
Restricting image deletion (image lock) (page 47)
• You may not be able to select this setting while a wireless connection is
established. Cancel the wireless connection.
Some menu options are not displayed.
Some options are not displayed depending on the [Variety menu (page 136)]
settings. Change the settings.
The camera makes sound.
Depending on the settings, the camera may produce an audible focusing sound.
Shooting
Cannot switch to shooting mode.
Disconnect the HDMI cable or USB cable.
Cannot take pictures or record movies.
• When the camera is in playback mode, press the
button, shutter-release button, or ( ) button.
The camera body (page 21)
177
If there is a problem
Troubleshooting
(shooting/playback mode)
• When menus are displayed, press the shutter-release button or ( ) button.
The camera body (page 21)
• The flash lamp flashes while the flash is charging. Wait until charging is complete.
The flash lamp (page 52)
• Insert a memory card with sufficient free space into the camera.
• The battery is exhausted.
Charging the battery (page 36), The battery (page 192)
The camera cannot focus.
• The subject is too close. Try [Shoot close-ups (page 58)] in [Choose a style].
• Set [AF assist (page 140)] to [Auto].
• The subject is hard to focus on.
Subjects not suitable for autofocus (page 78)
• Turn the camera off and then on again.
Images are blurred.
• Use the flash.
Flash (page 52)
• Enable electronic VR.
Electronic VR (page 139)
• Use a tripod to stabilize the camera. Using the [Self-timer (page 53)] at the same
time is more effective.
Bright specks appear in images captured with flash.
The flash is reflecting off particles in the air. Set the [Flash (page 52)] to [Flash off].
Flash does not fire.
• The [Flash (page 52)] is set to [Flash off].
• A function that disables the flash is selected.
Default settings list for flash and self-timer (page 80),
be used simultaneously when shooting (page 81)
Functions that cannot
Digital zoom cannot be used.
Digital zoom cannot be used when using certain settings in other functions.
Functions that cannot be used simultaneously when shooting (page 81)
178
If there is a problem
Troubleshooting
No sound when the shutter is released.
• [Change sounds (page 73)] [Turn sounds on or off] is set to [Turn sounds
off], or [Pick a shutter sound] is set to [ ].
• Do not block the speaker.
The camera body (page 21)
AF-assist illuminator does not light.
[AF assist (page 140)] is set to [Off]. AF-assist illuminator may not light depending
on the current settings, even when [Auto] is selected.
Images appear smeared.
The lens is dirty. Clean the lens.
Cleaning and storage (page 195)
Colors are unnatural.
Hue is not adjusted properly.
Photograph food (page 59),
Change colors (page 72)
Randomly spaced bright pixels (“noise”) appear in image.
The subject is dark and the shutter speed is too slow, or ISO sensitivity is too high.
Noise can be reduced by using the flash.
Flash (page 52)
Images are too dark (underexposed).
• The [Flash (page 52)] is set to [Flash off].
• The flash window is blocked.
The camera body (page 21)
• The subject is beyond the range of the flash. Check the range of the flash.
Specifications (page 199)
• Adjust exposure compensation.
Change colors (page 72)
• The subject is backlit.
- Use the flash.
Flash (page 52)
- Try [Shoot backlit scenes (page 63)] in [Choose a style].
Images are too bright (overexposed).
Adjust exposure compensation.
179
If there is a problem
Troubleshooting
Change colors (page 72)
Skin tones are not softened.
• In some shooting conditions, facial skin tones may not be softened.
• For images containing four or more faces, try [Make skin prettier] in [Add
makeup (page 92)].
Saving images takes time.
It may take more time to save images in the following situations:
• When the noise reduction function is in operation, such as when shooting in a
dark environment
• When [Choose a style] is set to [Shoot night scenes], [Take a series of
pictures], [Shoot backlit scenes], [Add a neon effect], or [Add a cartoon
effect]
• When the skin softening function is applied while shooting
Using skin softening (page 55)
A ring-shaped belt or rainbow-colored stripe appears on the
screen or images.
When shooting with backlighting or when a very strong light source (such as
sunlight) is in the frame, a ring-shaped belt or rainbow-colored stripe (ghosting) may
occur. Change the position of the light source, or frame the picture so that the light
source does not enter the frame, and try again.
Playback, editing
File cannot be played back.
• This camera may not be able to play back images saved with another make or
model of digital camera.
• This camera cannot play back movies recorded with another make or model of
digital camera.
• This camera may not be able to play back data edited on a computer.
Cannot zoom in on image.
• Playback zoom cannot be used with movies, and images with an image size of 160
× 120 or smaller.
• Playback zoom cannot be used with images created by [Add a "little planet"
effect] or [Curve pictures].
180
If there is a problem
Troubleshooting
• When viewing small images, the playback zoom ratio that is displayed may not
match the actual image zoom ratio.
• This camera may not be able to zoom in on images captured with another make or
model of digital camera.
Cannot record messages.
• Messages cannot be attached to movies.
• Use [Erase recordings (page 91)] to delete the message for an image before
recording a new one.
• Messages cannot be attached to images captured with other cameras.
Cannot edit images.
• Some images cannot be edited. Images that have already been edited may not be
edited again.
Before editing images (page 88)
• Images cannot be edited when they are played back using [View graded
pictures], [View favorites], or [View by date].
• Images with an image size of 640 × 480 or smaller cannot be edited using [Small
picture].
• Images with an aspect ratio other than 4:3 cannot be edited using [Small
picture].
• There is not enough free space on the memory card or in the internal memory.
• This camera is unable to edit images captured with other cameras.
• Editing functions used for images are not available for movies.
Cannot rotate image.
This camera cannot rotate images captured with another make or model of digital
camera.
Cannot delete image.
• Images cannot be deleted while image lock is set. Remove image lock.
Restricting image deletion (image lock) (page 47)
• Graded images are protected. Remove the grade from the image.
Changing or removing grades from individual images (page 105), Remove all
grades (page 106)
• Images added to favorites are protected. Remove the image from favorites.
Removing favorites from individual images (page 109), Removing all favorites
from images (page 109)
181
If there is a problem
Troubleshooting
TVs, printers, computers
Images are not displayed on the TV.
• A computer or printer is connected to the camera.
• The memory card contains no images.
• Remove the memory card to play back images in the internal memory.
Removing the battery or memory card (page 34)
The PictBridge startup screen is not displayed when the camera
is connected to a printer.
When [Charge by computer (page 148)] is set to [Auto], the PictBridge startup
screen may not be displayed and it may be impossible to print images with some
PictBridge-compatible printers. Set [Charge by computer] to [Off] and reconnect
the camera to the printer.
Images to be printed are not displayed.
• The memory card contains no images.
• Remove the memory card to print images in the internal memory.
Removing the battery or memory card (page 34)
Cannot select paper size with the camera.
The camera cannot be used to select the paper size in the following situations, even
when printing from a PictBridge-compatible printer. Use the printer to select the
paper size.
• The printer does not support the paper sizes specified by the camera.
• The printer automatically selects the paper size.
Nikon Transfer 2 does not start when the camera is connected
to a computer.
• The camera is off.
• The battery is exhausted.
Charge by computer (page 148)
• The USB cable is not correctly connected.
Transferring images to a computer with ViewNX-i (page 160)
• The camera is not recognized by the computer.
• The computer is not set to start Nikon Transfer 2 automatically. For more
information about Nikon Transfer 2, refer to ViewNX-i help.
182
If there is a problem
Troubleshooting
Smart devices, SnapBridge app
See “ Connecting to a smart device (SnapBridge) (page 164)” and the SnapBridge
online help (https://nikonimglib.com/snbr/onlinehelp/en/index.html).
Cannot select [Connect to smart device].
Cannot pair with a smart device using [Connect to smart
device].
•
•
•
•
•
Use a sufficiently charged battery.
Insert a memory card with sufficient free space into the camera.
Disconnect the HDMI cable or USB cable.
Set the following in the camera settings menu [Network menu (page 130)].
- [Airplane mode]: [Off]
- [Bluetooth] [Connection]: [Enable]
• Enable Bluetooth on the smart device.
Paired smart devices are not connected through Bluetooth
automatically.
• Set the following in the camera settings menu [Network menu (page 130)].
• - [Airplane mode]: [Off]
- [Bluetooth] [Connection]: [Enable]
• If the camera is paired with multiple smart devices, select the smart device you
want to connect in the camera settings menu [Network menu (page 130)]
[Bluetooth] [Paired devices].
• If multiple cameras are registered in the SnapBridge app, switch to the camera you
want to connect using the SnapBridge app.
Cannot upload images to a smart device that is connected with
the SnapBridge app.
• You can upload automatically through the auto link feature only when connected
through Bluetooth. To upload automatically, set the following.
• - Camera settings menu [Network menu (page 130)] [Send while
shooting] [Still images]: [On]
- SnapBridge app
tab [Auto link] [Auto download]: Enable
- If the camera settings menu [Network menu (page 130)] [Bluetooth]
[Send while off] is set to [Off], change the setting to [On] or turn on the
camera.
183
If there is a problem
Troubleshooting
• When there is a large number of images to upload during Bluetooth
communication, communication may be disconnected while uploading. If you
turn the camera off and then on again, it is reconnected to the smart device.
Uploading resumes after the camera is reconnected in the following situations.
• - When the camera settings menu [Network menu (page 130)] [Send
while shooting] [Still images] is set to [On]
- When images are marked for upload using the camera playback menu
[Settings] [Mark for upload]
• You may not be able to upload images or uploading may be canceled while the
camera is being operated.
Cannot download still images at the original size on the smart
device that is connected with the SnapBridge app.
For [Send while shooting] and [Mark for upload] in the camera, still images are
uploaded at an image size of up to 2 megapixels. To upload at their original size, use
[Download pictures] in the SnapBridge app.
Cannot perform remote photography from a smart device that
is connected with the SnapBridge app.
• You cannot perform remote photography when there is no free space in the
internal memory or memory card. Delete unnecessary images or insert a memory
card with sufficient free space.
• You may not be able to perform remote photography while the camera is being
operated.
Communication quality is poor or image upload speed is
extremely slow when using a Wi-Fi connection with the
SnapBridge app.
In the camera settings menu [Network menu (page 130)]
[Network settings] [Channel], try changing the channel.
184
If there is a problem
Troubleshooting
[Wi-Fi]
Error messages
Check the following if an error message is displayed.
• If you cannot find a relevant entry, also check “
Troubleshooting (page 175)”.
Battery temperature is elevated. The camera will turn off.
The camera will turn off to prevent overheating.
The camera turns off automatically. Wait until the camera or battery temperature has
cooled before resuming use.
Memory card is write protected.
The write-protect switch is locked. Unlock it.
This card cannot be used.
This card cannot be read.
An error occurred while accessing the memory card.
• Use an approved memory card.
Memory cards that can be used (page 34)
• Check that the terminals are clean.
• Confirm that the memory card is correctly inserted.
Inserting the battery and memory card (page 33)
Card is not formatted. Format card?
The memory card has not been formatted for use in the camera.
Formatting deletes all data saved on the memory card. If you need to keep copies of
any images, make sure to press flexible button 4 ( [No]) and save the copies to a
computer or other medium before formatting the memory card. Press flexible button
3 ( [Yes]) to format the memory card.
Memory cards (page 194)
Out of memory.
Delete images or insert a new memory card.
Image cannot be saved.
• An error occurred while saving the image. Insert a new memory card or format the
memory card or internal memory.
Format card (page 141), Format memory (page 142)
185
If there is a problem
Error messages
• The camera has run out of file numbers. Insert a new memory card or format the
memory card or internal memory.
Format card (page 141), Format memory (page 142)
• The image cannot be registered to the [Welcome screen].
• There is insufficient space to save the copy. Delete images from the destination.
No further pictures can be graded.
Album is full. No further pictures can be added.
999 images have already been graded or added to favorites. Remove some grades or
remove some images from favorites.
Changing or removing grades from individual images (page 105), Remove all
grades (page 106), Removing favorites from individual images (page 109),
Removing all favorites from images (page 109)
Image cannot be modified.
Check that the images can be edited.
Restrictions on image editing (page 88),
Cannot edit images. (page 181)
Cannot record movie.
A time-out error occurred while saving the movie on the memory card. Select a
memory card with a faster write speed.
Memory cards that can be used (page 34), Maximum movie recording time
(page 124)
Memory contains no images.
There are no images in the internal memory or on the memory card.
• Remove the memory card to play back images in the internal memory.
• To copy the images saved in the camera’s internal memory to the memory card,
use [Copy (page 119)].
File contains no image data.
The file was not created or edited with this camera. The file cannot be viewed on this
camera. View the file using a computer or the device used to create or edit this file.
All images are hidden.
There are no images available for a slide show, etc.
Turn the camera off and then on again.
An error occurred in lens operation. If you turn the camera off and then on again, lens
operation will return to normal.
186
If there is a problem
Error messages
The camera is on but does not respond. (page 175)
If the error persists even after turning the camera off and then on again, contact your
retailer or Nikon-authorized service representative.
Communications error
An error occurred while communicating with the printer. Turn the camera off and
reconnect the USB cable.
Printing images with a printer (page 155)
System error
An error occurred in the camera’s internal circuitry. Turn the camera off, remove and
reinsert the battery, and turn the camera on.
The camera is on but does not respond. (page 175)
If the error persists, contact your retailer or Nikon-authorized service representative.
Printer error: check printer status.
After solving the problem, press flexible button 3 ( [Resume]) to resume printing.
See the documentation provided with your printer for further guidance and
information.
Printer error: check paper.
Load the specified size of paper and press flexible button 3 ( [Resume]) to resume
printing.
See the documentation provided with your printer for further guidance and
information.
Printer error: paper jam.
Remove the jammed paper and press flexible button 3 ( [Resume]) to resume
printing.
See the documentation provided with your printer for further guidance and
information.
Printer error: out of paper.
Load the specified size of paper and press flexible button 3 ( [Resume]) to resume
printing.
See the documentation provided with your printer for further guidance and
information.
187
If there is a problem
Error messages
Printer error: check ink.
There is a problem with the printer’s ink. Check the ink and press flexible button 3
( [Resume]) to resume printing.
See the documentation provided with your printer for further guidance and
information.
Printer error: out of ink.
Replace the ink cartridge and press flexible button 3 ( [Resume]) to resume
printing.
See the documentation provided with your printer for further guidance and
information.
Printer error: file corrupt.
There is a problem with the image file to be printed. Press flexible button 4 (
[Cancel]) to cancel printing.
188
If there is a problem
Error messages
Technical notes
Notes about wireless communication functions.................................................... 190
Caring for the product...................................................................................................... 191
Cleaning and storage........................................................................................................195
File names............................................................................................................................. 197
Accessories............................................................................................................................198
Specifications.......................................................................................................................199
Trademarks........................................................................................................................... 204
Index....................................................................................................................................... 206
189
Technical notes
Notes about wireless communication functions
For precautions about wireless communications in your country of purchase, please
refer to the manual included with the camera.
190
Technical notes
Notes about wireless communication functions
Caring for the product
Observe the precautions described below in addition to the warnings in “ For your
safety (page 11)” and “ <Important> Notes about shockproof, waterproof, and
dustproof performance and condensation (page 15)” when using or storing the
device.
The camera
● Do not apply strong impact to the camera
The product may malfunction if subjected to strong shock or vibration. In addition,
do not touch or apply force to the lens.
● Avoid sudden changes in temperature
Sudden changes in temperature, such as when entering or leaving a heated building
on a cold day, can cause condensation to form inside the device. To prevent
condensation, place the device in a carrying case or a plastic bag before exposing it
to sudden changes in temperature.
● Keep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment that generates strong
electromagnetic radiation or magnetic fields. Doing so could result in loss of data or
camera malfunction.
● Do not point the lens at strong light sources for extended periods
Avoid pointing the lens at the sun or other strong light sources for extended periods
when using or storing the camera. Intense light may cause the image sensor to
deteriorate or produce a white blur effect in photographs.
● Turn the product off before removing or disconnecting the power source
or memory card
Do not remove the battery while the product is on, or while images are being saved
or deleted. Forcibly cutting power in these circumstances could result in loss of data
or in damage to the memory card or internal circuitry.
● Notes about the monitor
• Monitors (including electronic viewfinders) are constructed with extremely high
precision; at least 99.99% of pixels are effective, with no more than 0.01% being
missing or defective. Hence while these displays may contain pixels that are always
lit (white, red, blue, or green) or always off (black), this is not a malfunction and has
no effect on images recorded with the device.
• Images in the monitor may be difficult to see under bright lighting.
191
Technical notes
Caring for the product
• Do not apply pressure to the monitor, as this could cause damage or malfunction.
Should the monitor break, care should be taken to avoid injury caused by broken
glass and to prevent the liquid crystal from the display touching the skin or
entering the eyes or mouth.
The battery
● Precautions for use
• Note that the battery may become hot after use.
• Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C
(104°F) as this could cause damage or malfunction.
• If you notice any abnormalities such as excessive heat, smoke, or an unusual smell
coming from the battery, immediately discontinue use and consult your retailer or
Nikon-authorized service representative.
• After removing the battery from the camera or optional battery charger, put the
battery in a plastic bag, etc. in order to insulate it.
● Charging the battery
Check the battery level before using the camera and replace or charge the battery if
necessary.
• Charge the battery indoors with an ambient temperature of 5°C to 35°C (41°F to
95°F) before use.
• A high battery temperature may prevent the battery from charging properly or
completely, and may reduce battery performance. Note that the battery may
become hot after use; wait for the battery to cool before charging. When charging
the battery inserted into this camera using the Charging AC Adapter or a
computer, the battery is not charged at battery temperatures below 5°C (41°F) or
above 55°C (131°F).
• When the battery temperature is between 45°C–55°C (113°F–131°F), the
chargeable capacity may decrease.
• Do not continue charging once the battery is fully charged as this will result in
reduced battery performance.
• The battery temperature may increase during charging. However, this is not a
malfunction.
● Carrying spare batteries
Whenever possible, carry fully charged spare batteries when taking pictures on
important occasions.
● Using the battery when cold
On cold days, the capacity of batteries tends to decrease.
If an exhausted battery is used at a low temperature, the camera may not turn on.
Keep spare batteries in a warm place and exchange as necessary. Once warmed, a
cold battery may recover some of its charge.
192
Technical notes
Caring for the product
● Battery terminals
Dirt on the battery terminals may prevent the camera from functioning. Should the
battery terminals become dirty, wipe them off with a clean, dry cloth before use.
● Charging an exhausted battery
Turning the camera on or off while an exhausted battery is inserted in the camera
may result in reduced battery life. Charge the exhausted battery before use.
● Storing the battery
• Always remove the battery from the camera or optional battery charger when it is
not being used. Minute amounts of current are drawn from the battery while it is
in the camera, even when not in use. This may result in excessive battery drain and
complete loss of function.
• Charging a used battery within six months is recommended. When storing the
battery for long periods, recharge it at least once every six months and use the
before returning it to storage.
camera until the battery level indicator is
• Put the battery in a plastic bag, etc. in order to insulate it and store it in a cool
place. The battery should be stored in a dry location with an ambient temperature
of 15°C to 25°C (59°F to 77°F). Do not store the battery in hot or extremely cold
locations.
● Battery life
A marked drop in the time a fully charged battery retains its charge, when used at
room temperature, indicates that the battery needs to be replaced. Purchase a new
battery.
● Recycling used batteries
Recycle rechargeable batteries in accord with local regulations, being sure to first
insulate the terminals with tape.
The Charging AC Adapter
• The EH-73P/EH-73PCH Charging AC Adapter is for use only with compatible
devices. Do not use with another make or model of device.
• Do not use any USB cable other than the UC-E21. Using a USB cable other than the
UC-E21 could result in overheating, fire or electric shock.
• Do not, under any circumstances, use another make or model of AC adapter other
than the EH-73P/EH-73PCH Charging AC Adapter, and do not use a commercially
available USB-AC adapter or a battery charger for a mobile phone. Failure to
observe this precaution could result in overheating or in damage to the camera.
• The EH-73P/EH-73PCH is compatible with AC 100–240 V, 50/60 Hz electrical
outlets. When using in other countries, use a plug adapter (commercially available)
as necessary. For more information about plug adapters, consult your travel
agency.
193
Technical notes
Caring for the product
Memory cards
● Precautions for use
• Use only Secure Digital memory cards.
Memory cards that can be used (page 34)
• Be sure to follow the precautions described in the documentation included with
the memory card.
• If the write-protect switch of the memory card is locked, you cannot shoot, delete
images, or format the memory card.
• Do not put labels or stickers on memory cards.
● Formatting
• Do not format the memory card using a computer.
• The first time you insert a memory card that has been used in another device into
this camera, be sure to format it with this camera.
We recommend formatting new memory cards with this camera before using
them with this camera.
• Note that formatting a memory card permanently deletes all images and
other data on the memory card.
Be sure to make copies of any images you wish to keep before formatting the
memory card.
• If the message [Card is not formatted. Format card?] is displayed when the
camera is turned on, the memory card must be formatted. If there is data that you
do not want to delete, press flexible button 4 ( [No]). Copy the necessary data to
a computer, etc. To start formatting, press flexible button 3 ( [Yes]).
• Do not perform the following during formatting, while data is being written to or
deleted from the memory card, or during data transfer to a computer. Failure to
observe this precaution could result in the loss of data or in damage to the camera
or memory card:
- Open the battery-chamber/memory card slot cover to remove/insert the
battery or memory card.
- Turn off the camera.
- Disconnect the AC adapter.
194
Technical notes
Caring for the product
Cleaning and storage
Cleaning after using the camera underwater
Follow the procedure below to rinse the camera with fresh water within 60 minutes
after using it underwater or at the beach.
1
Keep the battery-chamber/memory card slot cover closed and
wash off the camera with fresh water.
• Immerse the camera in a shallow basin filled with fresh water for 10 minutes.
• Immerse the camera in fresh water and shake it sufficiently in the water to remove
any foreign substances from the camera.
• When the camera is immersed in the water, a few air bubbles may come out from
2
3
the water drain holes of the camera such as openings in the microphone or
speakers. This is not a malfunction.
Wipe off water droplets with a soft cloth and dry the camera in a
well-ventilated and shady place.
• Place the camera on a dry cloth to dry it.
• Do not dry the camera with hot air from a hair dryer or clothes dryer.
After making sure that there are no water droplets on the
camera, open the battery-chamber/memory card slot cover and
use a soft dry cloth to gently wipe off any water or sand
remaining on the waterproof packing or inside the camera.
• If the cover is closed when the inside is wet, this could cause condensation or a
malfunction.
Cleaning after using the camera in conditions other
than underwater
Use a blower to remove any dust or lint that adheres to the lens, monitor, or camera
body. To remove fingerprints or other stains that cannot be removed with a blower,
gently wipe the parts with a soft dry cloth. If you wipe with too much pressure or
with a rough cloth, it may damage the camera or cause a malfunction.
195
Technical notes
Cleaning and storage
Storage
Remove the battery if the camera will not be used for an extended period.
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
Do not store the camera in any of the following locations:
• Places that are poorly ventilated or subject to humidity of over 60%
• Places exposed to temperatures above 50°C (122°F) or below –10°C (14°F)
• Places next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• For storing the battery, follow the precautions in “ The battery (page 192)” in “
Caring for the product (page 191)”.
196
Technical notes
Cleaning and storage
File names
Files saved with this camera are assigned file names as follows.
Item
1 Identifier
Description
Not shown on the screen of the camera.
•
•
•
•
DSCN: Original still images, movies
RSCN: Cropped copies
SSCN: Small picture copies
FSCN: Images created by an image editing function other than crop
and small picture
• XXXA: Messages recorded using [Leave a message] (the first three
letters are the same as the image for which the message was
recorded)
• XXXB: Messages recorded using [Leave a reply] (the first three letters
are the same as the image for which the message was recorded)
2 File
number
Assigned in ascending order, starting with “0001” and ending with
“9999.”
• A new folder is created each time a series of images are captured
using [Shoot at intervals], and the images are saved in that folder
with file numbers starting with “0001.”
3 Extension
Indicates file format.
• .JPG: Still images
• .MP4: Movies
• .WAV: Messages (File number is the same as the image for which the
message was recorded.)
197
Technical notes
File names
Accessories
Type
Product name
Battery charger MH-66 Battery Charger
It takes about 1 hour and 50 minutes to charge a fully exhausted
battery.
AC adapter
EH-62G AC Adapter
Connecting the EH-62G AC Adapter (page 198)
Accessories
• Accessories are not waterproof.
• Availability may vary with country or region.
• See our website or brochures for the latest information.
Connecting the EH-62G AC Adapter
1
2
Open the battery-chamber/memory card slot cover, and remove
the battery.
Fully insert the power connector cable in the power connector
slot, and then insert the AC adapter into the battery chamber.
• The battery-chamber/memory card slot cover cannot be closed while using the AC
adapter. Do not pull the power connector cable. If the cable is pulled, the
connection between the camera and power source is interrupted, and the camera
turns off.
198
Technical notes
Accessories
Specifications
Nikon COOLPIX W150 Digital Camera
Type
Compact digital camera
Number of effective pixels 13.2 million (Image processing may reduce the
number of effective pixels.)
Image sensor
1/3.1-in. type CMOS; approx. 14.17 million total pixels
Lens
NIKKOR lens with 3× optical zoom
Focal length
4.1–12.3 mm (angle of view equivalent to that of 30–
90 mm lens in 35mm [135] format)
f/-number
f/3.3–5.9
Construction
6 elements in 5 groups
Digital zoom
magnification
Up to 4× (angle of view equivalent to that of approx.
360 mm lens in 35mm [135] format)
Vibration reduction
Electronic VR (movies)
Motion blur reduction
Electronic VR (still images)
Autofocus (AF)
Contrast-detect AF
Focus range
[W]: Approx. 5 cm (2 in.)–∞,
[T]: Approx. 50 cm (1 ft 8 in.)–∞
(Distances measured from center of front surface of
the protective glass)
Focus-area selection
Center, face detection, target finding AF
Monitor
6.7 cm (2.7-in.), approx. 230k-dot, TFT LCD with antireflection coating and 5-level brightness adjustment
Frame coverage
(shooting mode)
Approx. 96% horizontal and vertical (compared to
actual picture)
Frame coverage
(playback mode)
Approx. 100% horizontal and vertical (compared to
actual picture)
Storage
Media
Internal memory (approx. 21 MB), SD/SDHC/SDXC
memory card
File system
DCF and Exif 2.31 compliant
199
Technical notes
Specifications
File formats
Still images: JPEG
Voice messages: WAV
Movies: MP4 (Video: H.264/MPEG-4 AVC, Audio: AAC
stereo)
Image size
Still images
Large (13 M) (4160×3120), Medium (4 M)
(2272×1704), Small (2 M) (1600×1200)
Movies
Large (1080p) (1920×1080), Small (640) (640×480),
Small (old-fashioned) (640×480)
ISO sensitivity (Standard
output sensitivity)
ISO 125–1600
Exposure
Metering mode
Matrix, center-weighted (digital zoom less than 2×),
spot (digital zoom 2× or more)
Exposure control
Programmed auto exposure and exposure
compensation (–2 EV, –1 EV, 0 EV, +0.7 EV, +1.5 EV)
Shutter
Mechanical and CMOS electronic shutter
Speed
• 1/2000–1 s
• 25 s ([Add light trails] in [Choose a style] is set to
Aperture
Electronically-controlled ND filter (–2 AV) selection
[Night sky])
Range
Self-timer
2 steps (f/3.3 and f/6.6 [W])
• 10 s, smile timer
• 5 s (self-portrait timer)
Flash
Range (approx.) (ISO
sensitivity: Auto)
[W]: 0.3–3.1 m (1 ft–10 ft)
[T]: 0.6–1.7 m (2 ft–5 ft 6 in.)
Flash control
TTL auto flash with monitor preflashes
Interface
USB connector
Micro-USB connector (Do not use any USB cable
other than the included UC-E21 USB Cable.), Hi-Speed
USB
• Supports Direct Print (PictBridge)
HDMI output connector HDMI micro connector (Type D)
200
Technical notes
Specifications
Wi-Fi (Wireless LAN)
Standards
IEEE 802.11b/g (standard wireless LAN protocol)
Operating frequency
2412–2462 MHz (1–11 channels)
Maximum output power 12.5 dBm (EIRP)
Authentication
Open system, WPA2-PSK
Bluetooth
Communication
protocols
Bluetooth Specification Version 4.1
Operating frequency
Bluetooth: 2402–2480 MHz
Bluetooth Low Energy: 2402–2480 MHz
Maximum output power Bluetooth: 3.5 dBm (EIRP)
Bluetooth Low Energy: 3.5 dBm (EIRP)
Power sources
• One EN-EL19 Rechargeable Li-ion Battery (included)
• EH-62G AC Adapter (available separately)
Charging time
Approx. 1 h 40 min (when using EH-73P/EH-73PCH
Charging AC Adapter and when no charge remains)
Battery life1
Still images
Approx. 220 shots when using EN-EL19
Movies (actual battery
life for recording)2
Approx. 1 h 35 min when using EN-EL19
Tripod socket
1/4 (ISO 1222)
Dimensions (W × H × D)
Approx. 109.5 × 67.0 × 38.0 mm (4.4 × 2.7 × 1.5 in.)
(excluding projections)
Weight
Approx. 177 g (6.3 oz) (including battery and memory
card)
Operating environment
Temperature
–10°C – +40°C (14°F–104°F) (for land use)
0°C–40°C (32°F–104°F) (for underwater use)
Humidity
85% or less (no condensation)
201
Technical notes
Specifications
Waterproof
JIS/IEC protection class 8 (IPX8) equivalent (under our
testing conditions)
Capacity to shoot images underwater up to a depth
of 10 m (33 ft) and for 60 minutes
Dustproof
JIS/IEC protection class 6 (IP6X) equivalent (under our
testing conditions)
Shockproof
Cleared our testing conditions3 compliant with MILSTD-810G w/Change 1 Method 516.7-Shock
• All measurements are performed in conformity with Camera and Imaging Products
Association (CIPA) standards or guidelines.
1 Battery life does not reflect the use of SnapBridge and may vary with the conditions of
use, including temperature, the interval between shots, and the length of time that
menus and images are displayed.
2 Individual movie files cannot exceed 29 minutes in length, even when there is sufficient
free space on the memory card for longer recording. The maximum size of a single
movie file is 4 GB. If a file exceeds 4 GB even when you record for less than 29 minutes,
recording ends.
3 Dropped from a height of 180 cm (5 ft 10 in.) onto a surface of 5 cm (2 in.) thick plywood
(changes in appearance, such as paint peeling off and deformation of the drop shock
portion and waterproof performance are not subject to the test). These tests do not
guarantee that the camera will be free from damage or trouble under all conditions.
EN-EL19 Rechargeable Li-ion Battery
Type
Rechargeable lithium-ion battery
Rated capacity
DC 3.7 V, 700 mAh
Operating temperature
0°C–40°C (32°F–104°F)
Dimensions (W × H × D)
Approx. 31.5 × 39.5 × 6 mm (1.3 × 1.6 × 0.3 in.)
Weight
Approx. 14.5 g (0.5 oz)
202
Technical notes
Specifications
EH-73P/EH-73PCH Charging AC Adapter
Rated input
AC 100–240 V, 50/60 Hz, MAX 0.14 A
Rated output
DC 5.0 V, 1.0 A
Operating
temperature
0°C–40°C (32°F–104°F)
Dimensions (W × H Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.2 in.) (excluding plug
adapter)
× D)
For Argentina: Approx. 55 × 63 × 59 mm (2.2 × 2.5 × 2.4 in.)
For India: Approx. 55 × 63.5 × 59 mm
For Korea: Approx. 55 × 67 × 59 mm
Weight
Approx. 51 g (1.8 oz) (excluding plug adapter)
For Argentina and India: Approx. 76 g (2.7 oz)
For Korea: Approx. 73 g
The symbols on this product represent the following:
AC, DC, Class II equipment (The construction of the product is doubleinsulated.)
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change
without notice.
• The sample images displayed on the camera and the images and illustrations in
the manual are for illustrative purposes only.
203
Technical notes
Specifications
Trademarks
Trademark information
• Windows is either a registered trademark or trademark of Microsoft Corporation in
the United States and/or other countries.
• The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Nikon Corporation is under
license.
• Apple®, App Store®, the Apple logos, Mac, OS X, macOS, iPhone®, iPad®, iPod touch®
and iBooks are trademarks or registered trademarks of Apple Inc., in the U.S. and
other countries.
• Android, Google Play and the Google Play logo are trademarks of Google LLC. The
Android robot is reproduced or modified from work created and shared by Google
and used according to terms described in the Creative Commons 3.0 Attribution
License.
• iOS is a trademark or registered trademark of Cisco Systems, Inc., in the United
States and/or other countries and is used under license.
• Adobe, the Adobe logo, Acrobat, and Reader are either trademarks or registered
trademarks of Adobe Systems Incorporated in the United States and/or other
countries.
• SDXC, SDHC, and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI, HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing, LLC.
• Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi
Alliance.
• All other trade names mentioned in this manual or the other documentation
provided with your Nikon product are the trademarks or registered trademarks of
their respective holders.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal and
non-commercial use of a consumer to (i) encode video in compliance with the AVC
standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer
engaged in a personal and non-commercial activity and/or was obtained from a
video provider licensed to provide AVC video. No license is granted or shall be
204
Technical notes
Trademarks
implied for any other use. Additional information may be obtained from MPEG LA,
L.L.C.
See https://www.mpegla.com.
FreeType License (FreeType2)
Portions of this software are copyright © 2012 The FreeType Project (https://
www.freetype.org). All rights reserved.
MIT License (HarfBuzz)
Portions of this software are copyright © 2019 The HarfBuzz Project (https://
www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.
205
Technical notes
Trademarks
Index
A
C
Accessories ......................................................198
AC adapter ...................................................... 198
Add a bubble effect ..................................... 64
Add a cartoon effect ....................................66
Add a diorama effect ...................................96
Add a fisheye effect ......................................95
Add a neon effect ..........................................65
Add a "little planet" effect ......................102
Add cartoon effects ......................................98
Add clarity under water .......................... 102
Add light trails ..................................................68
Add makeup ..................................................... 92
Add starbursts ..................................................96
AF assist .............................................................140
AF-assist illuminator ..................................... 21
Airplane mode ..............................................130
App ...................................................................... 165
Arrange pictures .............................................94
Autofocus ........................................................... 78
Auto off ................................................................ 44
Camera settings menu ............................ 128
Change colors ..........................................72, 97
Change sounds ...............................................73
Charge by computer .................................148
Charge lamp ..............................................22, 36
Charging ..............................................................36
Charging AC Adapter ........................................
...................................................... 11, 36, 193, 203
Choose a size ....................................................74
Choose a style ..................................................57
Cleaning ............................................................195
Clock ............................................................38, 135
Computer .........................................................160
Conformity marking ..................................150
Connect to smart device ........................130
Continuous ........................................................ 62
Copy .................................................................... 119
Copyright information .............................145
Create a diorama effect ..............................66
Crop ........................................................................85
Curve pictures ...............................................103
B
Battery ...................11, 33, 36, 192, 201, 202
Battery chamber .............................................23
Battery charger ............................................. 198
Battery level .......................................................42
Battery-chamber/memory card slot
cover ...................................................................... 22
Bluetooth ......................................................... 131
Brighter/darker ................................................ 72
Brightness ...........................................................72
Brush ......................................................................16
Button sound ....................................................73
D
Date and time ............................................... 135
Date format .....................................................135
Date stamp ......................................................138
Daylight saving time ......................... 39, 135
Decorate ......................................................71, 98
Delete ....................................................................46
Digital zoom ......................................................76
Direct print ...................................................... 155
Dynamic Fine Zoom .................................... 76
E
Electronic VR .................................................. 139
206
Technical notes
Index
Erase .......................................................................46
Erase recordings ............................................. 91
Exchange messages .....................................89
Exposure compensation ........................... 72
Eyelet for strap ................................................. 21
L
Lamp ..............................................................21, 22
Language ......................................................... 143
Leave a message ............................................ 89
Leave a reply ..................................................... 90
Lens ..............................................................21, 199
F
Li-ion rechargeable battery ...........................
Face detection ................................................. 77
....................................11, 33, 36, 192, 201, 202
Favorites ............................................................108
Location data display ................................146
File name ..........................................................197
Firmware version .........................................151 M
Flash ............................................................... 21, 52 Mark for upload ............................................117
Flash lamp .................................................. 22, 52 Memory card ..................................33, 34, 194
Flexible buttons ...................................... 22, 28 Memory card slot ...........................................23
Focal length ....................................................199 Menu background ......................................147
Focus ..............................................................43, 77 Microphone .......................................................21
Focus area ...................................................26, 43 Micro-USB connector ........................................
Focus lock ...........................................................79 ...................................................... 23, 36, 155, 160
Formatting ....................................34, 141, 142 Mirror .....................................................................64
Format card .............................................34, 141 Monitor ..............................................22, 24, 191
Format internal memory ........................ 142 More vivid/less vivid .....................................72
Format memory ...........................................142 Movie frame size .............................................75
Format memory cards ......................34, 141 Movie playback ............................................ 126
Full-frame playback ...................................... 45 Movie recording .......................................... 123
F-number ............................................................26 Movie-record button ...................................21
Multi selector ....................................................22
G
Grading ..............................................................104 N
Network menu ..............................................130
H
Number of exposures remaining...............
HDMI cable ..................................................... 153
............................................................................42, 74
HDMI micro connector ....................23, 153
Highlight colors ...................................... 72, 97 P
Photograph fireworks ................................. 63
I
Photograph food ............................................59
Image comment ..........................................144
Photo size ........................................................... 74
Image lock ..........................................................47
PictBridge .........................................................155
Inputting characters ..................................132
Picture play ........................................................ 92
Internal memory ............................................ 33
Picture-in-picture ...........................................69
207
Technical notes
Index
Shoot under water ........................................59
Shutter sound .................................................. 73
Shutter speed ...................................................26
Shutter-release button ................21, 43, 77
Skin softening .................................................. 55
Slide show ....................................................... 112
Small picture .................................................. 120
Smart device .................................................. 165
Smile timer .........................................................55
SnapBridge app ........................................... 165
Soften pictures ................................................ 96
Sound ....................................................................73
Speaker .................................................................21
R
Stamp ....................................................................99
Remaining movie recording time..............
Strap .......................................................................32
......................................................................123, 124
Resetting .......................................................... 149 T
Reset all ............................................................. 149 Take a series of pictures ............................. 62
Restore default settings .......................... 132 Take soft pictures ........................................... 66
Retouch .............................................................119 Thumbnail playback .....................................86
Rotate pictures ..............................................120 Toy camera .........................................................95
Tripod socket ......................................... 23, 201
S
TV .......................................................................... 153
Saturation ........................................................... 72
Screen indicators ............................................24 U
SD memory card ..........................33, 34, 194 Underwater face framing ..........................60
Self-portrait timer .......................................... 53 USB cable .......................................36, 155, 160
Self-timer .............................................................53
V
Self-timer lamp ................................................21
Variety menu ..................................................136
Send while shooting .................................131
ViewNX-i ........................................................... 160
Shooting ................................................... 42, 123
View by date ...................................................111
Shooting menu ...............................................49
Vividness ..............................................................72
Shooting/playback mode button..............
Volume .............................................................. 126
............................................................................22, 45
Shoot at intervals ........................................... 61 W
Shoot a movie miniature .......................... 67 Waterproof packing ..................................... 23
Shoot backlit scenes .................................... 63 Welcome screen .......................................... 134
Shoot close-ups ..............................................58 Wi-Fi .....................................................................131
Shoot night scenes .......................................58
Playback .................................................... 45, 126
Playback menu ................................................87
Playback mode ................................................45
Playback zoom .................................................84
Play recordings ................................................90
Point and shoot ...............................................50
Power switch .............................................21, 38
Power-on lamp ........................................21, 30
Pressing halfway ..................................... 43, 77
Print ......................................................................155
Printer .................................................................155
Protect .....................................................104, 108
208
Technical notes
Index
Z
Zoom .....................................................................76
209
Technical notes
Index
CT9C01(11)
6MQ04011-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising