Volvo V40 Cross Country 2019 Quick Guide

V40
C RO S S CO U N T RY
QU I C K GUI D E
WELCOME TO YOUR NEW VOLVO!
This folder contains a selection of the most common functions in your car. The owner's manual and other
manuals contain safety instructions and all warning, important and note texts.
The following symbols mean:
Different parts are pointed out in the overview images.
Step–by–step instructions.
It is particularly important to read the owner's manual.
Warning, important and note texts, which must be read, are included on the last page.
All options and accessories, known at the time of publication, are marked with an asterisk: *.
The owner's manual is available as a printed manual and digitally in the car's screen, on the Web and as a
mobile app. The mobile app contains the whole owner's manual as well as instruction films and has several
search paths with text and illustrations. The mobile app can be downloaded to mobile devices from App Store or
Google Play.
In addition, learn more about your car at www.volvocars.com.
01 Starting and driving
04 Functions in your car
Remote control key
Keyless* lock system
Starting and switching off the engine
Wipers
Tyre pressure monitoring*
Climate system controls
Headlamp control
Combined instrument panel
Infotainment system
Phone*
Internet*
External audio device
Buttons in the centre console
Settings in the menu system
Workshop/booking service*
ECO*
02 Driver support in your car
Park Assist Pilot*
Lane Keeping Aid*
Start/Stop function*
Pedestrian protection*
05 Tips
03 Your driving environment
Adjusting the seat
Adjusting the steering wheel
Refuelling
Car care
Storage spaces
AUX/USB* and 12 V sockets
How does the remote control key work?
01
Unlocks doors and tailgate and disarms the alarm. The
function can be set in MY CAR.
Locks doors and tailgate and arms the alarm.
Approach light duration.
One press unlocks the tailgate, two presses open it
slightly.
Information*.
Panic function.
The remote control key can store settings for,
amongst other things, door mirrors and power
driver's seat* – see owner's manual.
What do the remote control key indicator
lamps* show?
01
Green constant light: The car is locked.
Yellow constant light: The car is unlocked.
Red continuous light: the alarm has been triggered
since the car was locked.
Red light flashing alternately in both indicator lamps:
The alarm was triggered less than 5 minutes ago.
How does the Keyless* lock system work?
01
The remote control key can remain in a pocket, for
example.
Lock and arm the alarm
–– Touch the rear section of one of the outer door handles
or press lightly on the smaller of the tailgate's two
rubberised buttons.
Unlock and disarm the alarm
–– Grip a door handle and open the door in the usual
way or press lightly on the larger of the tailgate's two
rubberised buttons.
How do I start and switch off the engine?
01
Starting
Push the remote control key into the ignition switch
(does not apply to Keyless drive*).
For manual gear changing, depress the clutch pedal.
For automatic gear changing, depress the brake
pedal.
Briefly press the START/STOP ENGINE button.
Switching off
Briefly press the START/STOP ENGINE button.
Take the remote control key out from the
ignition switch (does not apply to Keyless
drive*).
How do I start the windscreen wipers and rain
01
sensor*?
Move the lever downward to start the windscreen wipers
and upward for a single sweep.
Rain sensor On/Off.
Regulates the sensor sensitivity or the intermittent
delay.
Wiper, rear window - intermittent/normal.
To lift up the wiper blades they must be in service
position – see owner's manual.
How do I calibrate the tyre pressure
monitoring system (TM)*?
01
Calibration is always required after changing tyres or
changed tyre pressure. In the event of lamp illumination
the tyre pressure needs to be checked and the system
calibrated. Proceed as follows:
With the ignition switched off, inflate all tyres in
accordance with the tyre pressure label on the driver's
side door pillar.
Start the car. In the normal view for the MY CAR
source, press OK/MENU.
Select Tyre monitor > Start calibration and press
OK/MENU.
Recalibration is carried out while the car is being
driven.
How do I use Park Assist Pilot PAP*?
02
PAP checks the available space, and then steers in the
car. Your task is to keep a close watch around the car,
change gear, control the speed and brake/stop.
Activate PAP with a press of the button. Do not drive
faster than 30 km/h (20 mph).
Follow the instructions that are shown in the
combined instrument panel.
Be prepared to stop the car when the graphics and
text advise this.
What is the function of Lane Keeping Aid
LKA*?
02
If the car is about to cross a side line the LKA will actively
steer back into the lane with a slight steering torque in the
steering wheel. If the car crosses a side line then LKA will
warn you with pulsating vibration in the steering wheel.
–– Activate LKA with a press of the button.
How do I use the Start/Stop function*?
02
Manual gearbox
Stop the engine: Declutch, move the gear lever into
neutral position and release the clutch pedal.
Start the engine: Depress the clutch pedal.
Automatic gearbox
Stop the engine: Stop the car with the foot brake and then
maintain the brake pressure.
Start the engine: Release foot pressure on the foot brake.
Illuminated button lamp indicates that the function is
active.
How does the pedestrian protection work*?
02
Collision Warning with Auto Brake and Cyclist and
Pedestrian Detection, which can warn, brake and/or stop
for vehicles, cyclists and pedestrians.
The function is only an aid and does not work in all
situations – for example, it does not see cyclists from the
side and pedestrians who are shorter than 80 cm or who
are partially obscured.
It is important to understand this function – see
owner's manual.
How do I adjust the seat?
03
Raise/lower the front of the seat cushion.
Raise/lower the seat.
Move the seat forward/backward.
Tilt the backrest.
Storing settings for power seat*.
Memory buttons for power seat*.
Store setting:
Hold the button depressed to store settings while
depressing one of the memory buttons. Hold the buttons
depressed until a signal is heard and text is shown in the
combined instrument panel. This stores the position of the
seat as well as the door mirrors.
The memory settings for the power seat and door
mirrors can also be stored in the remote control
key* – see owner's manual.
How do I adjust the steering wheel?
03
Release the steering wheel lock.
Adjust the steering wheel forward/backward and up/
down.
Lock the steering wheel.
How do I regulate the temperature with the
ECC*?
04
Press for individual temperature. Press repeatedly to
select the setting for the left, right or both sides. Turn
to set the temperature. The centre console's screen
shows the selected temperature for each side.
Press AUTO for automatic control of air distribution
and other functions. The screen shows AUTO
CLIMATE.
How do I defrost the windscreen?
04
Press to activate the windscreen's electric heating* symbol (1) in the screen illuminates.
The next press also activates maximum airflow against
windscreen and side windows - symbols (1) and (2)
illuminate.
The next press switches off both of the functions – no
symbol illuminates.
Without electric heating: Press to activate/deactivate the
air flow.
How does the headlamp control's auto mode
work?
04
AUTO mode provides the following options:
• The daytime running lights automatically switch
between daytime running lights and dipped beam.
• Main beam can be activated when dipped beam is
switched on.
• Active high beam (AHB)* – that dims and activates main
beam automatically – can be used.
• Tunnel detection* is activated.
How is the trip computer operated?
04
OK – opens the combined instrument panel's menu,
confirms messages or menu options.
Thumbwheel – browses between menu options or
trip computer options.
RESET – resets data in the selected trip computer
step or goes back in the menu structure.
How do I reset the trip meter?
04
Turn the left-hand stalk switch's thumbwheel to show
trip meter T1 and total dist. or T2 and total dist..
Give a long press on the RESET button in order to
reset the trip meter shown.
How do I switch on and off the Infotainment
system?
04
A short press activates the system.
A long press (until the screen switches off)
deactivates.
To switch off the sound: Give a short press - the next
press reactivates.
Note that the whole of the Sensus system (including
navigation* and phone functions) is started/switched off at
the same time.
How do I navigate in the infotainment
system?
04
Press RADIO, MEDIA, MY CAR, NAV*, TEL* or * to
select main source. In this mode, the normal view of
the last active source is shown.
Press OK/MENU or the thumbwheel* in the steering
wheel to access the selected source's main menu.
Turn TUNE or the thumbwheel to navigate in the
menus.
Press OK/MENU or the thumbwheel to make a
selection in the menus.
Briefly press EXIT to go back in the menu system,
cancel a function or delete entered characters.
Give a long press on EXIT to go back to normal view,
or to go from normal view to the main source view.
Tips:
To go to the shortcut menu from normal view, press once
on the main source button. Press again to go back to
normal view.
For more information about operating the system –
see owner's manual.
How do I connect a Bluetooth® phone*?
04
In the normal view for the phone source, press OK/
MENU.
Select Make car discoverable and confirm with OK/
MENU.
Activate Bluetooth® in the mobile phone. Search for
and connect the car to the phone.
Follow the instructions in the mobile phone and the
screen.
The phone is now connected and can be controlled from
the car.
If registering the phone does not succeed – see
owner's manual.
How do I connect to the Internet*?
04
Connect the mobile phone via Bluetooth® or activate
tethering in the phone for Wi-Fi connection. For car
modem connection, fit the SIM card into the reader in
the glovebox.
In the normal view for the MY CAR source, press
OK/MENU, select Settings > Internet settings >
Connect through. Select a connection option.
Wi-Fi: connect to a network and enter its password.
Car modem: enter the SIM card's PIN code.
For more information about connection - see
owner's manual.
What services do I get with Volvo ID*?
04
Volvo ID is your personal ID registered to the car which
can give you access to various services such as a personal
login to volvocars.com and the facility to send an address
from the map service on the Internet directly to the vehicle.
Register or manage your Volvo ID as follows:
Press twice on the connection button .
Select Apps > Settings and follow the onscreen
instructions.
For more information about Volvo ID - see owner's
manual.
How do I use apps when the car is connected
to the Internet*?
04
When the car is connected to the Internet, apps for music
services, web radio, navigation services and simple web
browsers can be used.
Press the Connect button .
Select Apps and press OK/MENU in order to show
the available apps.
Select the app and confirm with OK/MENU.
Some apps require login using a separate account from
the app/service supplier. Use existing account or register
again. Follow the on-screen instructions.
How do I make a call*?
04
In the normal view for the phone source, enter the
required number or turn the thumbwheel on the
steering wheel downward in order to access the
phone book, and upward for the call register.
Press the thumbwheel to dial.
The call is interrupted with a press on EXIT.
For more ways to make a call with the phone – see
owner's manual.
How do I answer the phone*?
–– Press the thumbwheel to accept incoming calls.
The call is rejected/interrupted with a press on EXIT.
For more ways to answer the phone – see owner's
manual.
04
How do I connect an external audio device?
04
Connect an external device via the AUX or USB*
inputs in the centre console's storage compartment.
In the normal view for the media source, press MEDIA
in the centre console.
Turn TUNE to the desired audio source and press
OK/MENU.
For other connections of an external device – see
owner's manual.
How do I set a GPS* destination?
04
Press NAV to start the navigation system* – a map is
shown.
Press once again on NAV and select Set destination
> Address with the thumbwheel and press OK/
MENU.
Enter a search criterion/search criteria using the
character wheel or the centre console's numeric
keypad.
Then select Set single destination or Add as
waypoint and press OK/MENU.
For more information and market deviations regarding
navigation - see the owner's manual.
What settings can be made in the menu
system?
Many of the car's functions are handled in MY CAR, e.g.
settings for clock, door mirrors and locks.
See the earlier heading ”How do I navigate in the
infotainment system?” for which buttons to use.
04
How do I adjust the clock?
04
In the normal view for the MY CAR source, press OK/
MENU.
Select Settings > System options > Time settings.
Turn TUNE to Auto time and press OK/MENU to
activate automatic setting of the time.
Make sure you select the current location in order to set
the correct time in the car.
How do I make a call to my workshop or book
04
a service*?
–– In the normal view for the MY CAR source, press OK/
MENU and select Service & repair.
Under Service & repair you can find information about
your chosen workshop, the one you registered via
volvocars.com. In Dealer information there is the option
to call and send an appointment request to the workshop.
There is also the option to update workshop information
and set the workshop as destination.
Only applies to certain markets.
What does ECO* do?
04
One press on ECO activates an optimal fuel-efficient
driving program including, amongst other things, the
following changes:
• Start/Stop – the engine may auto-stop before the car
is stationary.
• Eco Coast – engine braking ceases and the car coasts.
The function applies to cars with automatic gear
changing.
• Deactivation or reduction of certain climate functions.
How do I refuel?
05
With the car unlocked, open the fuel filler flap by
pushing lightly on the rear part of the flap and release.
Fold out the flap.
Insert the pump nozzle in the fuel filler opening.
After refuelling: Wait 5–8 seconds before removing
the pump nozzle.
How should I wash the car?
05
Handwashing is gentler on the paintwork than an
automatic car wash. The paintwork is also more
sensitive when it is new. For this reason, handwashing is
recommended during the first few months with a new car.
Use clean water and a washing sponge. Remember that
dirt ad grit can scratch the paintwork.
How should I clean the leather upholstery*?
05
Leather requires regular care in order to maintain
appearance. For this reason, the leather upholstery should
be treated using the Volvo Leather Care kit 1-4 times per
year. Light leather upholstery benefits from being wiped
off with a moistened cloth every week. The Volvo Leather
Care kit is available for purchase from a Volvo dealer.
Where are the storage spaces located?
05
Shown here are some of the car's storage spaces.
The owner's manual shows the location of more
storage spaces.
Where are the AUX/USB* and 12 V sockets
located?
05
The remote control key must be at least in key position I in
order for the 12 V sockets in the passenger compartment
to work. The cargo area's 12 V socket* is always live.
How does the Keyless* lock system work?
The use of gloves may prevent the Keyless function in the door handles. Electromagnetic fields and screening can interfere with the
Keyless function. Do not place/store the remote control key near a mobile phone or metal objects.
How do I start and switch off the engine?
After a cold start the idling speed is high irrespective of outside temperature. It is part of Volvo's efficient emissions system. During cold
starting, certain diesel engines have a delayed start due to preheating.
How do I use Park Assist Pilot PAP*?
PAP does not work in all situations but is designed simply as a supplementary aid. The driver always bears ultimate responsibility for
ensuring that the vehicle is driven safely, and for having an overview of the surroundings and other road users approaching or passing
while parking.
What is the function of Lane Keeping Aid LKA*?
LKA is only a driver tool, and does not work in all driving situations and traffic, weather and road conditions. The driver is always
responsible that the vehicle is driven in a safe manner and that laws and traffic regulations in force are followed.
How does the pedestrian protection work*?
The function cannot detect all pedestrians in all situations and does not see, for example, partially obscured pedestrians, people in clothing
that hides their body contour or pedestrians shorter than 80 cm. The function cannot detect all cyclists in all situations and does not see,
for example, partially obscured cyclists, cyclists with concealed body contours or cyclists approaching from the side. The driver is always
responsible that the vehicle is driven in a correct manner and with a safety distance adapted to the speed.
How do I adjust the seat?
Adjust the driving position of the driver's seat correctly before setting off – never while driving. Make sure that the seat is in locked
position in order to avoid personal injury in the event of heavy braking or an accident.
How do I adjust the steering wheel?
Adjust the steering wheel (after adjusting the seat) before setting off – never while driving.
How do I connect to the Internet*?
Using the Internet involves data being transferred (data traffic), which may incur a charge. Activation of data roaming may incur additional
charges. Contact your network operator about the cost for data traffic. Connect via car modem: to avoid having to enter the PIN code every
time the car is started, the PIN code lock can be deactivated under the Car modem option by deselecting Lock SIM card. Connect via
Wi-Fi: Note that certain phones switch off tethering after the contact with the car has been disconnected. The tethering in the phone
therefore needs to be reactivated the next time it is used.
How should I clean the leather upholstery*?
Some coloured clothing (e.g. jeans and suede garments) may discolour the upholstery. Never use strong solvents – they could damage the
upholstery.
Learn more about your car at www.volvocars.com.
TP 26582 (English) AT 1817, MY19. Copyright © 2000-2018 Volvo Car Corporation
Where are the AUX/USB* and 12 V sockets located?
Max. current take-off is 10 A (120 W) if one 12 V socket is used at a time in the tunnel console. If both sockets in the tunnel console are
used at the same time, then the figure is 7.5 A (90 W) per socket. Max. current take-off is 10 A (120 W) for the 12 V socket in the cargo
area.