Barco HDQ-2K40 User Reference Manual

Command Catalog
1011000110100100101100101001010101010010100101
1010011001010100100100100100111010100101000101
0110110001001010011001100101010010010010101010
1011000110100100101100101001010101001001001010
1010011001010100100100100100111010100100101010
0110110001001010011001100101010010100101001010
1011000110100100101100101001010101110101100101
1010011001010100100100100100111011001001010101
0110110001001010011001100101010010100100110101
1011000110100100101100101001010101010010100101
1010011001010100100100100100111010100101000101
1011000110100100101100101001010101001001001010
1010011001010100100100100100111010100100101010
0110110001001010011001100101010010100101001010
1011000110100100101100101001010101110101100101
1010011001010100100100100100111011001001010101
Reference manual
For HDQ 2K40
R5905446/03
08/06/2015
Barco NV
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.82.11
Fax: +32 56.36.883.86
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Printed in Belgium
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or
stored in a retrieval system without the prior written consent of Barco.
Changes
Barco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied warranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or the
program(s) described in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in this
publication; these changes are incorporated in new editions of this publication.
The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the secured Barco web site
https://www.barco.com/en/signin.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.
All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for
the products or their manufacturers.
Table of contents
TABLE OF CONTENTS
1. Introduction . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 7
1.1
About this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2. The Barco Projection Protocol. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. 9
2.1
2.2
2.3
2.4
The Barco Projection Protocol explained . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ethernet communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
RS232/RS422/USB-B communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The command representation in this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3. Commands .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 17
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
3.18
3.19
3.20
3.21
3.22
3.23
3.24
3.25
3.26
3.27
3.28
3.29
3.30
3.31
3.32
3.33
3.34
3.35
3.36
3.37
3.38
3.39
3.40
3.41
3.42
3.43
3.44
3.45
3.46
3.47
3.48
3.49
3.50
3.51
3.52
3.53
3.54
3.55
3.56
3.57
3.58
3.59
3.60
3.61
3.62
3.63
3D dark time adjustment, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3D dark time adjustment, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3D Double/Tripple Flash limit, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3D Double/Tripple Flash limit, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
3D field dominance, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3D field dominance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3D L/R Output Reference Delay, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3D L/R Output Reference Delay, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
3D mode, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3D mode, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
3D status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 29
3D status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3D Sync Loop status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3D Sync Loop status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
brightness possible, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
clear test pattern, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
contrast possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
decrement blanking bottom, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
decrement blanking left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
decrement blanking right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
decrement blanking top, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
decrement brightness, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
decrement color balance blue green ratio, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
decrement color balance red green ratio, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
decrement contrast, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
decrement dimming value, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
decrement gamma, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
decrement input black balance , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
decrement input white balance , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
decrement phase, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
decrement saturation, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
decrement sharpness, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
decrement shutter, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
decrement tint, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
freeze, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
function read electronic convergence, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
function read input balance pattern status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
function write electronic convergence , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
get aspect ratio file, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
get aspect ratio height, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
get aspect ratio width, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
get baudrate, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
get blanking bottom, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
get blanking left, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
get blanking right, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
get blanking top, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
get brightness, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
get clamp delay, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
get clamp width, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
get color balance blue green ratio, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
get color balance red green ratio, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
get color temperature, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
get common address, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
get contrast, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
get dimming, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
get ext contrast, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
get ext gamma, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
get ext phase, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
get ext sharpness, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
get freeze status, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
get gamma, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
get gamma (text value), read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
get input black balance, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
R5905446 COMMAND CATALOG 08/06/2015
1
Table of contents
3.64 get input white balance, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
3.65 get intensity, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
3.66 get ir hold off configuration, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3.67 get lamp status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
3.68 get lamp status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
3.69 get layout, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
3.70 get lcd backlight level, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
3.71 get lcd time out, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
3.72 get lock, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
3.73 get no signal color logo, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
3.74 get no signal shutdown delay, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
3.75 get no signal shutdown status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
3.76 get output window native resolution status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
3.77 get output window parameters, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
3.78 get output window status, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
3.79 get P7 TCGD blue X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
3.80 get P7 TCGD blue Y, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
3.81 get P7 TCGD cyan X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
3.82 get P7 TCGD cyan Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
3.83 get P7 TCGD green Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
3.84 get P7 TCGD magenta X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
3.85 get P7 TCGD magenta Y, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
3.86 get P7 TCGD red X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
3.87 get P7 TCGD red Y, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
3.88 get P7 TCGD selection, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
3.89 get P7 TCGD white X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
3.90 get P7 TCGD white Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
3.91 get P7 TCGD yellow X, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
3.92 get P7 TCGD yellow Y, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
3.93 get phase, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
3.94 get projector address, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
3.95 get same lens settings status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
3.96 get saturation, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
3.97 get scan/orientation configuration , read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
3.98 get sharpness, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
3.99 get shutter status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
3.100 get soft edge black level, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
3.101 get soft edge size black level bottom, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
3.102 get soft edge size black level left, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
3.103 get soft edge size black level right, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
3.104 get soft edge size black level top, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
3.105 get soft edge size bottom, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
3.106 get soft edge size left, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
3.107 get soft edge size right, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
3.108 get soft edge size top, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
3.109 get soft edge status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
3.110 get source, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
3.111 get source extended, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
3.112 get text on, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
3.113 get tint, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
3.114 get warp axis position, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
3.115 get warp file, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
3.116 get warp grid size, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
3.117 get warp hierarchic keystone in X direction, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
3.118 get warp hierarchic keystone in Y direction, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
3.119 get warp hierarchic linearity in X direction, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
3.120 get warp hierarchic linearity in Y direction, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
3.121 get warp hierarchic point shift, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
3.122 get warp keystone horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
3.123 get warp keystone vertical. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
3.124 get warp line shift horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144
3.125 get warp line shift vertical. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
3.126 get warp linearity horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
3.127 get warp linearity vertical. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
3.128 get warp pin barrel horizontal. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
3.129 get warp pin barrel vertical. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
3.130 get warp point shift. Deprecated from version 1.6, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
3.131 get warp rotation, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
3.132 get warp scale horizontal., read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
3.133 get warp scale vertical., read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
3.134 get warp shift horizontal, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
3.135 get warp shift vertical, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
3.136 get warp status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
3.137 get warp X1. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
3.138 get warp X2. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
3.139 get warp X3. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
2
R5905446 COMMAND CATALOG 08/06/2015
Table of contents
3.140 get warp X4. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
3.141 get warp Y1. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
3.142 get warp Y2. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
3.143 get warp Y3. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
3.144 get warp Y4. Deprecated from version 1.6, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
3.145 get window selection, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
3.146 increment blanking bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
3.147 increment blanking left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167
3.148 increment blanking right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
3.149 increment blanking top, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
3.150 increment brightness, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
3.151 increment color balance blue green, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
3.152 increment color balance red green, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172
3.153 increment contrast, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
3.154 increment dimming value, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
3.155 increment gamma, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
3.156 increment input black balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
3.157 increment input white balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
3.158 increment phase, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
3.159 increment saturation, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
3.160 increment sharpness, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
3.161 increment shutter, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
3.162 increment tint, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
3.163 input format horizontal total possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
3.164 phase possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
3.165 read auto picture alignment configuration, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
3.166 read barscale position, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
3.167 read customer id, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
3.168 read date time, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
3.169 read DMX address, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
3.170 read DMX mode, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
3.171 read DMX universe, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191
3.172 read gateway configuration, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
3.173 read global software version, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
3.174 read image load method, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
3.175 read infrared ports, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
3.176 read lamp CLO status, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
3.177 read lamp CLO target lumens, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
3.178 read lamp runtime, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
3.179 read language, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199
3.180 read menu position, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200
3.181 read network configuration, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
3.182 read panel size, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202
3.183 read projector runtime, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
3.184 read projector serial number, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204
3.185 read projector status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
3.186 read wifi configuration, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
3.187 read wifi key Mgmt, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
3.188 read wifi scan, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208
3.189 read wifi SSID, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209
3.190 read wifi status, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
3.191 RS interface selection , read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
3.192 RS interface selection , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
3.193 saturation possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213
3.194 save current adjustments to a file, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214
3.195 save custom settings, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
3.196 save image settings, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
3.197 select main window as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217
3.198 select PIP window as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218
3.199 select source 1 as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219
3.200 select source 2 as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220
3.201 select source 3 as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
3.202 select source 4 as prefix, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222
3.203 select window, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223
3.204 set aspect ratio file, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224
3.205 set aspect ratio height, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225
3.206 set aspect ratio width, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226
3.207 set blanking bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227
3.208 set blanking left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228
3.209 set blanking right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229
3.210 set blanking top , write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230
3.211 set brightness, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .231
3.212 set clamp delay , write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232
3.213 set clamp width, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233
3.214 set color balance blue green ratio, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234
3.215 set color balance red green ratio, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .235
R5905446 COMMAND CATALOG 08/06/2015
3
Table of contents
3.216
3.217
3.218
3.219
3.220
3.221
3.222
3.223
3.224
3.225
3.226
3.227
3.228
3.229
3.230
3.231
3.232
3.233
3.234
3.235
3.236
3.237
3.238
3.239
3.240
3.241
3.242
3.243
3.244
3.245
3.246
3.247
3.248
3.249
3.250
3.251
3.252
3.253
3.254
3.255
3.256
3.257
3.258
3.259
3.260
3.261
3.262
3.263
3.264
3.265
3.266
3.267
3.268
3.269
3.270
3.271
3.272
3.273
3.274
3.275
3.276
3.277
3.278
3.279
3.280
3.281
3.282
3.283
3.284
3.285
3.286
3.287
3.288
3.289
3.290
3.291
4
set color temperature, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236
set contrast, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237
set dimming, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238
set gamma, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239
set input black balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240
set input white balance, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241
set intensity, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242
set lamp status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243
set layout , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244
set lcd backlight level, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245
set lcd time out, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246
set lens focus, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247
set lens shift, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248
set lens zoom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249
set lock, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250
set no signal color logo, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251
set no signal shutdown delay, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252
set no signal shutdown status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253
set output window in native resolution, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254
set output window parameters, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255
set output window status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .256
set P7 TCGD blue X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257
set P7 TCGD blue Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258
set P7 TCGD cyan X, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259
set P7 TCGD cyan Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260
set P7 TCGD green X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261
set P7 TCGD green Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262
set P7 TCGD magenta X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263
set P7 TCGD magenta Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264
set P7 TCGD red X , write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .265
set P7 TCGD red Y, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .266
set P7 TCGD selection, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267
set P7 TCGD white X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268
set P7 TCGD white Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269
set P7 TCGD yellow X, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270
set P7 TCGD yellow Y, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271
set phase, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .272
set same lens settings status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273
set saturation, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274
set scan/orientation configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275
set sharpness, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .276
set shutter position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277
set soft edge black level, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278
set soft edge size black level bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279
set soft edge size black level left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280
set soft edge size black level right, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281
set soft edge size black level top, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282
set soft edge size bottom, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283
set soft edge size left, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284
set soft edge size right , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285
set soft edge size top , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286
set soft edge status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287
set source , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288
set source extended, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289
set test pattern by name, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291
set test pattern convergence, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292
set test pattern convergence green blue, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293
set test pattern convergence red blue, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294
set test pattern convergence red green blue, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295
set tint, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296
set warp axis position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297
set warp file, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298
set warp grid size, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299
set warp hierarchic keystone in X direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300
set warp hierarchic keystone in Y direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301
set warp hierarchic linearity in X direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302
set warp hierarchic linearity in Y direction, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .303
set warp hierarchic point shift, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .304
set warp keystone horizontal. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305
set warp keystone vertical. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .306
set warp line shift horizontal. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307
set warp line shift vertical. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308
set warp linearity horizontal. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309
set warp linearity vertical. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .310
set warp pin barrel horizontal. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
set warp pin barrel vertical. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .312
R5905446 COMMAND CATALOG 08/06/2015
Table of contents
3.292 set warp point shift. Deprecated from version 1.6, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313
3.293 set warp rotation, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .314
3.294 set warp scale horizontal, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315
3.295 set warp scale vertical , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316
3.296 set warp shift horizontal, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .317
3.297 set warp shift vertical, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318
3.298 set warp status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .319
3.299 set warp X1. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320
3.300 set warp X2. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321
3.301 set warp X3. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322
3.302 set warp X4. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323
3.303 set warp Y1. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .324
3.304 set warp Y2. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .325
3.305 set warp Y3. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326
3.306 set warp Y4. Deprecated from version 1.6, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .327
3.307 sharpness possible, read. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328
3.308 text off, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329
3.309 text on, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330
3.310 tint possible, read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331
3.311 unfreeze, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332
3.312 warp file delete, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .333
3.313 warp file rename, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334
3.314 write auto picture alignment configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .335
3.315 write barscale position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .336
3.316 write customer id, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .337
3.317 write DMX address, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .338
3.318 write DMX mode, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .339
3.319 write DMX universe, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .340
3.320 write gateway configuration, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341
3.321 write infrared ports status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .342
3.322 write lamp CLO status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .343
3.323 write lamp CLO target lumens, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .344
3.324 write language, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345
3.325 write menu position, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .346
3.326 write network configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .347
3.327 write projector off, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .348
3.328 write projector on, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349
3.329 write wifi configuration, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .350
3.330 write wifi key mgmt, write. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351
3.331 write wifi scan, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352
3.332 write wifi SSID , write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353
3.333 write wifi status, write . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .354
Index. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. . 355
R5905446 COMMAND CATALOG 08/06/2015
5
Table of contents
6
R5905446 COMMAND CATALOG 08/06/2015
1. Introduction
1. INTRODUCTION
R5905446 COMMAND CATALOG 08/06/2015
7
1. Introduction
1.1
About this document
What is the purpose of this document?
This document is applicable for the Barco device mentioned on the front page of this document and can thus not be used on any
other equipment.
It explains how the communication with the device is accomplished. In order to be able to communicate with this Barco device, the
Barco Projection Protocol, which is explained in detail in the following chapter, must be strictly followed.
Audience & prerequisites
This document is intended for software programmers and system integrators who want to be able to control a Barco device from
their own application. This document expects a basic knowledge of binary math, networking technology and programming.
8
R5905446 COMMAND CATALOG 08/06/2015
2. The Barco Projection Protocol
2. THE BARCO PROJECTION PROTOCOL
Overview
•
The Barco Projection Protocol explained
•
Ethernet communication
•
RS232/RS422/USB-B communication
•
The command representation in this manual
R5905446 COMMAND CATALOG 08/06/2015
9
2. The Barco Projection Protocol
2.1
The Barco Projection Protocol explained
Usage
The Barco Projection Protocol is used for the serial communication with a Barco device. This can be done by the following ways:
•
Ethernet
•
RS232
•
RS422
•
USB-B
Structure
Each command is built up from a start byte, device address, request/response, checksum and stop byte (image 2-1).
Start byte
Device address
1 byte (0xFE)
1 byte
Request /
Response
1..n bytes
Checksum
Stop byte
1 byte
1 byte (0xFF)
Image 2-1
Command structure
•
Start byte: used to let the receiver know that a command will follow.
•
Device address: when multiple devices (maximum 256) are connected on the same physical connection, the device address
is used to specify the device (only for RS232 connections). In case of an Ethernet connection, this should be set to 0.
•
Request/Response: the actual command bytes.
•
Checksum: used to detect if any errors occurred during transmission or reception of the command.
•
Stop byte: used to let the receiver know that the end of a command has been reached.
How is the checksum calculated?
The checksum calculation is based on modular arithmetic:
Checksum = (Device address + Request/Response) modulo 0x100 (or 256)
Bytes conversion
Some bytes cannot be used in a command. If they do appear in the request/response or checksum, they must be converted. The
table below gives an overview.
Byte
After conversion
0x80
0x80 0x00
0xFE
0x80 0x7E
0xFF
0x80 0x7F
When a byte sequence from the after conversion column is received, that sequence must be converted to the
corresponding byte.
Characters and character strings
Each character is sent as a byte, using the ANSI encoding method.
Character strings can be formatted in two ways:
•
C-style format
An array of one or more characters which is terminated by a NULL character (0x00). The position of the NULL character
determines the length of the string.
Example: ’f’ ’o’ ’o’ ’ ’ ’b’ ’a’ ’r’ 0x00
•
Pascal-style format
An array of one or more characters which is started (the first byte) with the length of the string. Therefore, Pascal-style strings
are limited to 255 characters.
Example: 0x07 ’f’ ’o’ ’o’ ’ ’ ’b’ ’a’ ’r’
ANSI
American National Standards Institute
10
R5905446 COMMAND CATALOG 08/06/2015
2. The Barco Projection Protocol
Data words
A data word is a value which consists of multiple bytes. Data words are formatted in big endian.
How to calculate the value of a data word?
Example of a 4-byte value: 0x01 0x20 0x50 0x30
= (0x01 * 256^3) + (0x20 * 256^2) + (0x50 * 256^1) + (0x30 * 256^0)
= (1 * 16777216) + (32 * 65536) + (80 * 256) + (48 * 1)
= 16777216 + 2097152 + 20480 + 48
= 18894896
msb
The most significant byte, is the byte with the greatest weight (value).
lsb
The less significant byte, is the byte with the smallest weight (value).
Big endian
When the first byte of a data word is the msb and the last byte is the lsb, the data word is in big endian.
Negative values
The two’s complement (2-complement) system is used for the representation of negative values.
Acknowledgement (ACK and NACK)
If a command is received, the receiver will check the validity and correctness of the command before processing it. If the command
is understood, the receiver will first acknowledge the command before doing the actual processing of the command. An ACK (ACKnowledge) is sent when these conditions are met:
•
The command format is correct
•
The command and its parameters are valid
•
The checksum is correct
When these conditions are not met, a NACK (Not ACKnowledge) is sent.
ACK
NACK
Byte 1
0x00
0x00
Byte 2
0x06
0x15
When the sender receives a NACK message, it is up the sender to decide what should happen next: retry sending the command or
discard the command.
Acknowledgements are not used in multicast communication.
Sending and receiving a command
A command which is sent to the device will consist of a request. A command which is received by the client will consist of a response.
Requests must be sent in the Barco Projection Protocol format: each request needs to be structured in the correct way before it is
sent to the device. Responses are also sent in the Barco Projection Protocol format.
Keep in mind that:
•
For Ethernet communication, the Device address must be set to 0.
•
A correct Checksum must be generated for the command.
After a request has been sent to the device, the acknowledgement of the request must be read first. After the request has been
acknowledged, the response from the device (if applicable) can be expected.
Example 1: The client wants to know the type of the device. It sends the following command: projector type, read. The device will
acknowledge (ACK) the request and then send the response which contains the device type.
R5905446 COMMAND CATALOG 08/06/2015
11
2. The Barco Projection Protocol
(1) projector type, read - request
Client
(2) ACK
Device
(3) projector type, read - response
Image 2-2
Example 1
Example 2: The client sends an unknown command. The device doesn’t recognize the command and sends a NACK.
(1) unknown command
Client
(2) NACK
Device
Image 2-3
Example 2
How to handle failing communication?
When a sender fails to send a command, or a receiver fails to return the expected response (ACK, NACK or response), some steps
must be followed to handle this failing communication.
There are 2 possible failures:
•
Communication link problems: if the sending of the commands itself doesn’t work, it will be because the communication is
broken (e.g. the receiver is disconnected from the network).
•
Answer back problems: when commands can be sent out but no response is sent back, it means that the communication link
is OK but the receiver is unable to answer back.
Each type of failure needs another way of handling.
Handling communication link problems
As communication link problems will most likely have a physical reason (cable disconnected, hub down, device down, …), the user
must be notified and must be asked for his feedback. In most cases there will be a user intervention needed to correct this problem
(connect the cable, reboot the hub, restart the device, …).
The actual implementation of this should be described in the specifications of the application.
Handling answer back problems
Answer back problems should be addressed in another way. When a receiver fails to answer back it might be that it is currently too
busy to answer back. The application software should implement some simple mechanisms to avoid problems when this occurs:
1.
Timeout waiting: the application should wait for a limited amount of time for an answer (e.g. max 10 seconds). This ensures
that the application can react when a command doesn’t get answered in time.
2.
Retry waiting: if the timeout expires, one can retry waiting for the answer. By doing this, the user has the opportunity to cancel
the action. If needed, the retry can even be repeated several times.
3.
Retry sending: when a command does not get answered after the timout waiting and retry waiting, the command is considered
to be lost in action and the application should send the command again.
This mechanism follows the sequence of the steps: first the timeout waiting is used, then the retry waiting and finally the retry
sending. If all of these steps fail, there might be a major problem with the receiver. In this case the user should be notified of these
problems so that he can check the status of the receiver.
12
R5905446 COMMAND CATALOG 08/06/2015
2. The Barco Projection Protocol
2.2
Ethernet communication
Introduction
The communication follows a client/server model where the device is the server. This means that the device responds on requests
that are sent by a client. The device will not send out messages on its own initiative.
The communication is blocking which means that when a request is sent to the device, no other requests can be sent until the device
has responded on the first request. The communication blocks for each request.
The connector used for the Ethernet ports are of rugged Neutrik EtherCon RJ45 type, which is compatible with
standard RJ45 cable connector. Straight (most common) as well as cross linked network cables can be used.
10/100 Base-T — RJ45 port
Pin
Description
1
TXD+
2
TXD-
3
RXD+
4
—
5
—
6
RXD-
7
—
8
—
Making connection with the device
The device is listening on TCP port 0xAAA0 (43680) for incoming connections. The IP address can be retrieved using the local user
interface or on the OSD menu of the device.
Device discovery
It is possible to discover all the devices on the network using a UDP broadcast. A UDP broadcast only works on IP networks and
requires a special socket connection: the datagram connection.
Device 1
Device 2
Client
LAN
Device n
Image 2-4
To discover the devices, send a datagram packet to the broadcast address 255.255.255.255 on port 0xA001.
The packet should contain 1 byte: 0x3F, which represents the character ‘?’.
All the devices that support UDP broadcast discovery, will answer on the request by sending an array of (C-language) strings on the
same socket. Each string represents a key-value pair with specific information about the device that has been discovered.
R5905446 COMMAND CATALOG 08/06/2015
13
2. The Barco Projection Protocol
Typically, the following strings will be returned:
•
hostname=value; the hostname of the device
•
ip-address=value; the IP address of the device
•
mac-address=value; the MAC address of the NIC on the device
•
type=value; the device type (not for DP90/DP100 projectors)
Remarks:
•
The broadcast does not follow the typical Barco Projection Protocol formatting: the request is just one byte (not marked up
as Barco Projection Protocol command) and the devices answer back without sending an ACK and without formatting their
response in the Barco Projection Protocol format.
•
The size of the array is undetermined, but in most cases it will contain 4 strings. However, this is open to future expansion, so
more strings can be added later.
•
The strings normally appear in this order: hostname, ip-address, mac-address and type, but this cannot be guaranteed.
The used broadcast is a limited broadcast. This means that the broadcast message is transmitted to all NIC’s
which are on the same IP segment as the client. This type of broadcast is not forwarded by routers so it will
not detect devices which are on another segment.
NIC
Network Interface Card
14
R5905446 COMMAND CATALOG 08/06/2015
2. The Barco Projection Protocol
2.3
RS232/RS422/USB-B communication
RS232
An Electronic Industries Association (EIA) serial digital interface standard specifying the characteristics of the communication path between two devices using either D-SUB 9 pins or D-SUB 25 pins connectors. This standard is used for
relatively short-range communications and does not specify balanced control lines. RS-232 is a serial control standard
with a set number of conductors, data rate, word length and type of connector to be used. The standard specifies component connection standards with regard to computer interface. It is also called RS-232-C, which is the third version
of the RS-232 standard, and is functionally identical to the CCITT V.24 standard. Logical ’0’ is > + 3V, Logical ’1’ is < 3V. The range between -3V and +3V is the transition zone.
RS422
An EIA serial digital interface standard that specifies the electrical characteristics of balanced (differential) voltage,
digital interface circuits. This standard is usable over longer distances than RS-232. This signal governs the asynchronous transmission of computer data at speeds of up to 920,000 bits per second. It is also used as the serial port
standard for Macintosh computers. When the difference between the 2 lines is < - 0.2V that equals with a logical ’0’.
When the difference is > +0.2V that equals to a logical ’1’..
Settings
Baud rate: Defines the speed of the data transfer. The baud rate can be set using the local user interface on the device. Consult
the user manual of the device for more detailed information.
Data bits: Eight (8) data bits are used for each character of the data transfer.
Parity: There is no parity bit used to perform error checking.
Stop bit: One (1) stop bit is used to define the end of a character.
Hardware
RS232/422 input (Sub-D) port
Pin
Description
1
DCD : Data Carrier Detect
2
RXD- : Receive Data
3
TXD- : Transmitted Data
4
DTR : Data Terminal Ready [RS232]
TXD+ : Transmitted Data [RS422]
5
GND : Ground
6
DSR : Data Set Ready [RS232]
RXD+ : Received Data [RS422]
7
— (not connected) —
8
CTS : Clear To Send
9
RI : Ring Indicator
R5905446 COMMAND CATALOG 08/06/2015
15
2. The Barco Projection Protocol
2.4
The command representation in this manual
About the command representation in this manual
•
Title: The title of a command is built up from its function (e.g. network settings), followed by its type (e.g. read).
•
Description: A general description of the command is given in the About this command section.
•
Request/Response table: Each row in the request/response table represents a datafield. A datafield contains 1 or more values.
a) Pos: The position of the datafield. When the size of the datafield is greater than 1, the datafield will take more than 1 position.
b) Size: The number of values the datafield must contain. This can be different from the total number of available values,
dependent on the value groups.
c) Name: The name of the datafield.
d) Description: The description of the datafield.
e) Content: The value(s) of the datafield. This column consists of the value itself, and a value description. Every value is
displayed in a separate row. A datafield can have different value groups.
Different value groups can be distinguished as follows:
-
If consecutive rows have different background colors, the values belong to another group.
-
If they have the same background color, the values belong to the same group.
Only 1 value group per datafield may be choosen to be used in the command. All the values of a value group must appear
together and in the same order.
Example: the datafield below contains 2 IP addresses. Only 1 of the 2 IP-addresses may be choosen in the command. The values
of the IP-addresses must stay in the same order.
Pos
Size
0-3
4
Name
IP-address
Description
This is the IP-address datafield.
Content
192
IP-address 1, value 1 (dec)
168
IP-address 1, value 2 (dec)
1
IP-address 1, value 3 (dec)
1
IP-address 1, value 4 (dec)
192
IP-address 2, value 1 (dec)
168
IP-address 2, value 2 (dec)
1
IP-address 2, value 3 (dec)
2
IP-address 2, value 4 (dec)
Table 2-5
Example
16
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3. COMMANDS
R5905446 COMMAND CATALOG 08/06/2015
17
3. Commands
18
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.1
3D dark time adjustment, read
About this command
This command reads the 3D dark time adjustment.
Request
Pos
Size
Name
Description
0
1
3D
0x3d
Content
1
1
Read 3D dark time
adjustment
0x02
Response
Pos
Size
Name
Description
0
1
3D
0x3d
1
1
Read 3D dark time
adjustment
0x02
2-3
2
dark time set
dark time set in uS as WORD
Content
MSB (hex)
LSB (hex)
4-5
2
actual dark time
actual dark time in uS as WORD
MSB (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
19
3. Commands
3.2
3D dark time adjustment, write
About this command
This command writes the 3D dark time adjustment.
Request
Pos
Size
Name
Description
0
1
3D
0x3d
1
1
Write 3D dark time
adjustment
0x82
2-3
2
dark time adjustment
dark time in uS as WORD
Content
MSB (hex)
LSB (hex)
20
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.3
3D Double/Tripple Flash limit, read
About this command
This command reads the 3D Double/Tripple Flash limit.
Request
Pos
Size
Name
Description
0
1
3D
0x3d
Content
1
1
Read 3D Flash Limit
0x09
Response
Pos
Size
0
1
3D
0x3d
1
1
Read 3D Flash Limit
0x09
2
1
Double Flash
3
1
Name
Tripple Flash
R5905446 COMMAND CATALOG 08/06/2015
Description
Maximum input value to be double
flashed.
Maximum input value to be double
flashed.
Content
0x00
50Hz (hex)
0x01
48Hz (hex)
0x02
30Hz (hex)
0x00
30Hz (hex)
0x01
25Hz (hex)
0x02
24Hz (hex)
21
3. Commands
3.4
3D Double/Tripple Flash limit, write
About this command
This command writes the 3D Double/Tripple Flash limit.
Request
Pos
Size
0
1
3D
0x3d
1
1
Write 3D Flash Limit
0x89
2
1
Double Flash
3
22
1
Name
Tripple Flash
Description
Content
Maximum input value to be double
flashed.
Maximum input value to be double
flashed.
0x00
50Hz (hex)
0x01
48Hz (hex)
0x02
30Hz (hex)
0x00
30Hz (hex)
0x01
25Hz (hex)
0x02
24Hz (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.5
3D field dominance, read
About this command
This command reads the 3D field dominance for the current input. Only used with frame sequential 3D.
Request
Pos
Size
0
1
3D
Name
Description
0x3d
Content
1
1
Read 3D field dominance
0x05
Pos
Size
Name
0
1
3D
1
1
Read 3D field dominance
0x05
2
1
3D field dominance
0x00
Left - Right (hex)
0x01
Right - Left (hex)
Response
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
0x3d
23
3. Commands
3.6
3D field dominance, write
About this command
This command writes the 3D field dominance for the current input. Only used with frame sequential 3D.
Request
24
Pos
Size
0
1
3D
Name
Description
0x3d
Content
1
1
Write 3D field dominance
0x85
2
1
3D field dominance
0x00
Left - Right (hex)
0x01
Right - Left (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.7
3D L/R Output Reference Delay, read
About this command
This command reads the 3D L/R output reference delay.
Request
Pos
Size
Name
Description
0
1
3D
0x3d
Content
1
1
Read 3D L/R Output
Reference Delay
0x03
Response
Pos
Size
Name
Description
0
1
3D
0x3d
1
1
Read 3D L/R Output
Reference Delay
0x03
2-3
2
L/R output reference
delay
Content
2-complement number,
MSB (hex)
with units to be uS.
LSB (hex)
About datafield 4 (L/R output reference delay)
Time data shall be represented as a 2-complement number, with units to be microseconds.
Ex. 0x0190 = 400us (positive delay); 0xFE70 = - 400us (negative delay)
R5905446 COMMAND CATALOG 08/06/2015
25
3. Commands
3.8
3D L/R Output Reference Delay, write
About this command
This command writes the 3D L/R output reference delay.
Request
Pos
Size
Name
Description
0
1
3D
0x3d
Content
1
1
Write 3D L/R Output
Reference Delay
0x83
2-3
2
L/R output reference
delay
2-complement number,
MSB (hex)
with units to be uS.
LSB (hex)
About datafield 2 (L/R output reference delay)
Time data shall be represented as a 2-complement number, with units to be microseconds.
Ex. 0x0190 = 400us (positive delay); 0xFE70 = - 400us (negative delay)
26
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.9
3D mode, read
About this command
This command reads the 3D mode for the current input.
Request
Pos
Size
0
1
3D
Name
Description
0x3d
Content
1
1
Read 3D mode
0x01
Response
Pos
Size
Name
0
1
3D
0x3d
1
1
Read 3D mode
0x01
2
1
3D mode
0x00
Frame Sequential - Single
Channel (hex)
0x01
Frame Sequential - Dual
Channel (hex)
0x02
Frame Packing (FHD3D)
(hex)
0x03
Side-by-Side (Half) (hex)
0x04
Top-and-Bottom (Half) (hex)
0x06
SENSIO(R) HI_FI 3D (hex)
0x07
Line Altering (3G) (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
27
3. Commands
3.10 3D mode, write
About this command
This command writes the 3D mode for the current input.
Request
28
Pos
Size
0
1
3D
Name
Description
0x3d
Content
1
1
Write 3D mode
0x81
2
1
3D mode
0x00
Frame Sequential - Single
Channel (hex)
0x01
Frame Sequential - Dual
Channel (hex)
0x02
Frame Packing (FHD3D)
(hex)
0x03
Side-by-Side (Half) (hex)
0x04
Top-and-Bottom (Half) (hex)
0x06
SENSIO(R) HI_FI 3D (hex)
0x07
Line Altering (3G) (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.11 3D status, read
About this command
This command reads the 3D status for the current input.
Request
Pos
Size
0
1
3D
Name
Description
0x3d
Content
1
1
Read 3D status
0x00
Response
Pos
Size
Name
0
1
3D
0x3d
1
1
Read 3D status
0x00
2
1
3D status
0x00
Off (hex)
0x01
On (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
29
3. Commands
3.12 3D status, write
About this command
This command writes the 3D status for the current input.
Request
30
Pos
Size
0
1
3D
Name
Description
0x3d
Content
1
1
Write 3D status
0x80
2
1
3D status
0x00
Off (hex)
0x01
On (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.13 3D Sync Loop status, read
About this command
This command reads the 3D Sync Loop status for the current input.
Request
Pos
Size
Name
Description
0
1
3D
0x3d
Content
1
1
Read 3D Sync Loop
status
0x07
Response
Pos
Size
Name
0
1
3D
0x3d
1
1
Read 3D Sync Loop
status
0x07
2
1
3D Sync Loop status
0x00
Off (hex)
0x01
On (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
31
3. Commands
3.14 3D Sync Loop status, write
About this command
This command writes the 3D Sync Loop status for the current input.
Request
32
Pos
Size
Name
Description
0
1
3D
0x3d
Content
1
1
Write 3D Sync Loop
status
0x87
2
1
3D Sync Loop status
0x00
Off (hex)
0x01
On (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.15 brightness possible, read
About this command
This command checks if brightness adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj brightness
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj brightness"
0x02
brightness (hex)
Response
Pos
Size
Name
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj brightness
value known as "adj brightness"
0x02
brightness (hex)
2
1
possible
adjustment is possible or not
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
0x00
not possible (hex)
0x01
possible (hex)
33
3. Commands
3.16 clear test pattern, write
About this command
This command clears the test pattern.
Request
Pos
34
Size
Name
Description
Content
0
1
test pattern
byte value known as test pattern
0x41
1
1
test pattern write
byte value known as "test pattern write"
0xc4
test pattern write (hex)
2
1
clear
clear
0x00
clear (hex)
test pattern (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.17 contrast possible, read
About this command
This command checks if contrast adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj contrast
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj contrast"
0x01
contrast (hex)
Response
Pos
Size
Name
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj contrast
value known as "adj contrast"
0x01
contrast (hex)
2
1
possible
adjustment is possible or not
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
0x00
not possible (hex)
0x01
possible (hex)
35
3. Commands
3.18 decrement blanking bottom, write
About this command
This command decrements the blanking bottom by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj blanking bottom
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x4d
adj blanking bottom (hex)
"adj blanking bottom"
36
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.19 decrement blanking left, write
About this command
This command decrements the blanking left by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj blanking left
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x4e
adj blanking left (hex)
"adj blanking left"
R5905446 COMMAND CATALOG 08/06/2015
37
3. Commands
3.20 decrement blanking right, write
About this command
This command decrements the blanking right by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj blanking right
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x4f
adj blanking right (hex)
"adj blanking right"
38
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.21 decrement blanking top, write
About this command
This command decrements the blanking top by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj blanking top
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x4c
adj blanking top (hex)
"adj blanking top"
R5905446 COMMAND CATALOG 08/06/2015
39
3. Commands
3.22 decrement brightness, write
About this command
This command decrements the brightness by one.
Request
40
Pos
Size
0
1
Name
decrement brightness
Description
decrement brightness
Content
0x04
dec brightness (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.23 decrement color balance blue green ratio, write
About this command
This command decrements the color balance blue green ratio by one.
range 0 -> 200.
Request
Pos
Size
0
1
dec adj
Name
byte value known as "dec adj"
0x23
dec adj (hex)
1
1
adj color balance blue
green
byte value known as
0x44
adj color balance blue green
(hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
"adj color balance blue green"
Content
41
3. Commands
3.24 decrement color balance red green ratio, write
About this command
This command decrements the color balance red green ratio by one.
range 0 -> 200.
Request
42
Pos
Size
0
1
dec adj
Name
byte value known as "dec adj"
Description
0x23
dec adj (hex)
1
1
adj color balance red
green
byte value known as
0x43
adj color balance red green
(hex)
"adj color balance red green"
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.25 decrement contrast, write
About this command
This command decrements the contrast by one.
Request
Pos
Size
0
1
Name
decrement contrast
R5905446 COMMAND CATALOG 08/06/2015
Description
decrement contrast
Content
0x02
decrement contrast (hex)
43
3. Commands
3.26 decrement dimming value, write
About this command
This command decrements the dimming value by one.
The higher the value the brighter the light output.
Request
44
Pos
Size
0
1
dec adj
Name
byte value known as "dec adj"
Description
0x23
dec adj (hex)
1
1
adj dimming
byte value known as " adj dimming"
0x0d
adj dimming (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.27 decrement gamma, write
About this command
This command decrements the gamma by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj gamma
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x70
adj gamma (hex)
"adj input gamma"
R5905446 COMMAND CATALOG 08/06/2015
45
3. Commands
3.28 decrement input black balance , write
About this command
This command decrements the input black balance by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj input black balance
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x6e
adj input black balance (hex)
"adj input black balance"
46
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.29 decrement input white balance , write
About this command
This command decrements the input white balance by one.
Request
Pos
Size
Name
0
1
dec adj
1
1
adj input white balance
Description
Content
byte value known as "dec adj"
0x23
dec adj (hex)
byte value known as
0x6f
adj input white balance (hex)
"adj input white balance"
R5905446 COMMAND CATALOG 08/06/2015
47
3. Commands
3.30 decrement phase, write
About this command
This command decrements the phase by one.
Request
48
Pos
Size
0
1
Name
decrement phase
Description
decrement phase
Content
0x0C
dec phase (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.31 decrement saturation, write
About this command
This command decrements the saturation by one.
Request
Pos
Size
0
1
Name
decrement saturation
R5905446 COMMAND CATALOG 08/06/2015
Description
decrement saturation
Content
0x06
dec saturation (hex)
49
3. Commands
3.32 decrement sharpness, write
About this command
This command decrements the sharpness by one.
Request
50
Pos
Size
0
1
Name
decrement sharpness
Description
decrement sharpness
Content
0x0A
dec sharpness (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.33 decrement shutter, write
About this command
This command closes the shutter.
Request
Pos
Size
0
1
dec adj
Name
byte value known as "dec adj"
0x23
dec adj (hex)
1
1
adj shutter
byte value known as " adj shutter"
0x42
adj shutter (hex)
2
1
value
value should be 0x00 in order to be
valid.
0x00
value (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
51
3. Commands
3.34 decrement tint, write
About this command
This command decrements the tint by one.
Request
52
Pos
Size
0
1
Name
decrement tint
Description
decrement tint
Content
0x08
dec tint (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.35 freeze, write
About this command
This command freezes the active window.
Request
Pos
Size
0
1
max adj
Name
byte value known as "max adj"
Description
0x27
max adj (hex)
Content
1
1
adj freeze
byte value known as
0x23
adj freeze (hex)
"adj freeze"
R5905446 COMMAND CATALOG 08/06/2015
53
3. Commands
3.36 function read electronic convergence, read
About this command
This command reads the electronic convergence.
Request
Pos
Size
Name
0
1
function
1-4
4
read electronic
convergence
Description
Content
byte value known as "function"
0x82
function (hex)
DWORD value known as
0x00
BYTE 0 (hex)
"read electronic convergence"
0x00
BYTE 1 (hex)
0x00
BYTE 2 (hex)
0x4b
BYTE 3 (hex)
Response
Pos
Size
0
1
function
byte value known as "function"
0x82
function (hex)
1-4
4
read electronic
convergence
DWORD value known as
0x00
BYTE 0 (hex)
"read electronic convergence"
0x00
BYTE 1 (hex)
0x00
BYTE 2 (hex)
0x4b
BYTE 3 (hex)
bit 7
reserved (bit)
bit 6
reserved (bit)
bit 5
shift blue (MSBit) (bit)
bit 4
shift blue (LSBit) (bit)
bit 3
shift green (MSBit) (bit)
bit 2
shift green (LSBit) (bit)
5
6
1
1
Name
horizontal
vertical
Description
horizontal convergence
vertical convergence
Content
bit 1
shift red (MSBit) (bit)
bit 0
shift red (LSBit) (bit)
bit 7
reserved (bit)
bit 6
reserved (bit)
bit 5
shift blue (MSBit) (bit)
bit 4
shift blue (LSBit) (bit)
bit 3
shift green (MSBit) (bit)
bit 2
shift green (LSBit) (bit)
bit 1
shift red (MSBit) (bit)
bit 0
shift red (LSBit) (bit)
About datafield 4 (horizontal)
all shift values have a 2 bit size
MSBit Most Significant Bit
LSBit Least Significant Bit
About datafield 5 (vertical)
all shift values have a 2 bit size
MSBit Most Significant Bit
LSBit Least Significant Bit
54
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.37 function read input balance pattern status, read
About this command
This command reads the status of the special pattern used for input balance adjustment.
Request
Pos
Size
Name
0
1
function
1-4
4
read input balance
pattern status
Description
Content
byte value known as "function"
0x82
function (hex)
DWORD value known as
0x00
BYTE 0 (hex)
"read input balance pattern status"
0x00
BYTE 1 (hex)
0x00
BYTE 2 (hex)
0x51
BYTE 3 (hex)
Response
Pos
Size
0
1
function
byte value known as "function"
0x82
function (hex)
1-4
4
read input balance
pattern status
DWORD value known as
0x00
BYTE 0 (hex)
"read input balance pattern status"
0x00
BYTE 1 (hex)
0x00
BYTE 2 (hex)
0x51
BYTE 3 (hex)
0x00
off (hex)
0x01
on (hex)
5
1
Name
status
R5905446 COMMAND CATALOG 08/06/2015
Description
input balance test pattern status
Content
55
3. Commands
3.38 function write electronic convergence , write
About this command
This command sets the electronic convergence.
Request
Pos
Size
0
1
function
1-4
4
write electronic
convergence
5
6
1
1
Name
horizontal
vertical
Description
Content
byte value known as "function"
0x82
function (hex)
DWORD value known as
0x00
BYTE 0 (hex)
"write electronic convergence"
0x00
BYTE 1 (hex)
0x00
BYTE 2 (hex)
horizontal convergence
vertical convergence
0x4c
BYTE 3 (hex)
bit 7
reserved (bit)
bit 6
reserved (bit)
bit 5
shift blue (MSBit) (bit)
bit 4
shift blue (LSBit) (bit)
bit 3
shift green (MSBit) (bit)
bit 2
shift green (LSBit) (bit)
bit 1
shift red (MSBit) (bit)
bit 0
shift red (LSBit) (bit)
bit 7
reserved (bit)
bit 6
reserved (bit)
bit 5
shift blue (MSBit) (bit)
bit 4
shift blue (LSBit) (bit)
bit 3
shift green (MSBit) (bit)
bit 2
shift green (LSBit) (bit)
bit 1
shift red (MSBit) (bit)
bit 0
shift red (LSBit) (bit)
About datafield 2 (horizontal)
all shift values have a 2 bit size
MSBit Most Significant Bit
LSBit Least Significant Bit
About datafield 3 (vertical)
all shift values have a 2 bit size
MSBit Most Significant Bit
LSBit Least Significant Bit
56
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.39 get aspect ratio file, read
About this command
This command gets the aspect ratio file value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj aspect ratio
2
1
aspect ratio file
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc0
aspect ratio file (hex)
"adj aspect ratio"
byte value known as
"aspect ratio file"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj aspect ratio
2
1
aspect ratio file
byte value known as
NA
NA
aspect ratio string
aspect ratio as C-language string
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc0
aspect ratio file (hex)
"adj aspect ratio"
"aspect ratio file"
aspect ratio string (string)
About datafield 6 (aspect ratio string)
"4:3" or "16:9" or "5:4" or "2.35" or "1.88" or "1.85" or "1.78" or "16:10" or "1.67" or "Custom"
R5905446 COMMAND CATALOG 08/06/2015
57
3. Commands
3.40 get aspect ratio height, read
About this command
This command gets the aspect ratio height value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj aspect ratio
2
1
aspect ratio height
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc2
aspect ratio height (hex)
"adj aspect ratio"
byte value known as
"aspect ratio height"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj aspect ratio
2
1
aspect ratio height
byte value known as
3-6
4
aspect ratio height
aspect ratio height as DWORD
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc2
aspect ratio height (hex)
"adj aspect ratio"
"aspect ratio height"
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
58
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.41 get aspect ratio width, read
About this command
This command gets the aspect ratio width value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj aspect ratio
2
1
aspect ratio width
byte value known as
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc1
aspect ratio width (hex)
"adj aspect ratio"
"aspect ratio width"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj aspect ratio
2
1
aspect ratio width
byte value known as
3-6
4
aspect ratio width
aspect ratio width as DWORD
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc1
aspect ratio width (hex)
"adj aspect ratio"
"aspect ratio width"
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
59
3. Commands
3.42 get baudrate, read
About this command
This command gets the baudrate.
Request
Pos
Size
0
1
Name
baudrate
Description
byte value known as "baudrate"
Content
0x75
baudrate (hex)
0x75
baudrate (hex)
Response
60
Pos
Size
0
1
baudrate
Name
byte value known as "baudrate"
Description
NA
NA
baudrate
baudrate as C-string
Content
baudrate (string)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.43 get blanking bottom, read
About this command
This command gets the blanking bottom value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj blanking bottom
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x4d
adj blanking bottom (hex)
"adj blanking bottom"
Response
Pos
Size
Name
0
1
get adj
1
1
adj blanking bottom
2-3
2
value
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x4d
adj blanking bottom (hex)
"adj blanking bottom"
R5905446 COMMAND CATALOG 08/06/2015
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
61
3. Commands
3.44 get blanking left, read
About this command
This command gets the blanking left value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj blanking left
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj blanking left"
0x4e
adj blanking left (hex)
Response
62
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj blanking left
byte value known as "adj blanking left"
0x4e
adj blanking left (hex)
2-3
2
value
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.45 get blanking right, read
About this command
This command gets the blanking right value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj blanking right
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj blanking right"
0x4f
adj blanking right (hex)
Response
Pos
Size
Name
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj blanking right
byte value known as "adj blanking right"
0x4f
adj blanking right (hex)
2-3
2
value
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
63
3. Commands
3.46 get blanking top, read
About this command
This command gets the blanking top value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj blanking top
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj blanking top"
0x4c
adj blanking top (hex)
Response
64
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj blanking top
byte value known as "adj blanking top"
0x4c
adj blanking top (hex)
2-3
2
value
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.47 get brightness, read
About this command
This command gets the brightness value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj brightness
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj brightness"
0x02
adj brightness (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj brightness
byte value known as "adj brightness"
0x02
adj brightness (hex)
2
1
value
brightness value
Content
brightness value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
65
3. Commands
3.48 get clamp delay, read
About this command
This command gets the clamp delay value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj clamp delay
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x67
adj clamp delay (hex)
"adj clamp delay"
Response
Pos
Size
Name
0
1
get adj
1
1
adj clamp delay
2
1
value
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x67
adj clamp delay (hex)
"adj clamp delay"
clamp delay value
clamp delay value (hex)
range 0->255
66
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.49 get clamp width, read
About this command
This command gets the clamp width value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj clamp width
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x68
adj clamp width (hex)
"adj clamp width"
Response
Pos
Size
Name
0
1
get adj
1
1
adj clamp width
2
1
value
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x68
adj clamp width (hex)
"adj clamp width"
clamp width value
clamp width value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
67
3. Commands
3.50 get color balance blue green ratio, read
About this command
This command gets the color balance blue green ratio of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj color balance blue
green
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x44
adj color balance blue green
(hex)
"adj color balance blue green"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj color balance blue
green
2
1
blue green ratio
color balance blue green ratio multiplied
by 100
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x44
adj color balance blue green
(hex)
"adj color balance blue green"
blue green ratio (hex)
range 0 -> 200
68
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.51 get color balance red green ratio, read
About this command
This command gets the color balance red green ratio of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj color balance red
green
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x43
adj color balance red green
(hex)
"adj color balance red green"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj color balance red
green
2
1
red green ratio
color balance red green ratio multiplied
by 100
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x43
adj color balance red green
(hex)
"adj color balance red green"
red green ratio (hex)
range 0 -> 200
R5905446 COMMAND CATALOG 08/06/2015
69
3. Commands
3.52 get color temperature, read
About this command
This command gets the color temperature of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj color balance
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x45
adj color balance (hex)
"adj color balance"
Response
Pos
Size
Name
0
1
get adj
1
1
adj color temperature
NA
NA
color temperature
Description
byte value known as "get adj"
Content
0x21
get adj (hex)
0x45
color temperature expressed
color temperature (string)
as C-String
About datafield 4 (color temperature)
possible color temperature strings are:
"custom"
"projector-white"
"3200"
"5400"
"6500"
"9300"
70
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.53 get common address, read
About this command
This command gets the common address.
Request
Pos
Size
0
1
Name
common address
Description
byte value known as "common address"
Content
0x6c
common address (hex)
0x6c
common address (hex)
Response
Pos
Size
0
1
common address
Name
byte value known as "common address"
1
1
address
address
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
address (hex)
71
3. Commands
3.54 get contrast, read
About this command
This command gets the contrast value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj contrast
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj contrast"
0x01
adj contrast (hex)
Response
72
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj contrast
byte value known as "adj contrast"
0x01
adj contrast (hex)
2
1
contrast value
range 0->100
Content
contrast value (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.55 get dimming, read
About this command
This command gets the dimming value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj dimming
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj dimming"
0x0d
adj dimming (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj dimming
byte value known as "adj dimming"
0x0d
adj dimming (hex)
2
1
value
dimming value
Content
dimming value (hex)
range 255 -> 0
the higher the value the brighter the light
output
R5905446 COMMAND CATALOG 08/06/2015
73
3. Commands
3.56 get ext contrast, read
About this command
This command gets the ext contrast value.
Request
Pos
Size
Name
0
1
get adj ext
1
1
adj contrast
Description
Content
byte value known as "get adj ext"
0x2b
get adj ext (hex)
byte value known as "adj contrast"
0X01
adj contrast (hex)
Response
Pos
Size
Name
Description
0
1
get adj ext
byte value known as "get adj ext"
0x2b
get adj ext (hex)
1
1
adj contrast
byte value known as "adj contrast"
0X01
adj contrast (hex)
2-5
4
actual value
actual value as DWORD
Content
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
6-9
4
minimum value
minimum value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
10-13
4
maximum value
maximum value
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
14-17
4
step value
step value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
74
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.57 get ext gamma, read
About this command
This command gets the extended gamma value.
Request
Pos
Size
Name
0
1
get adj ext
1
1
adj gamma
Description
Content
byte value known as "get adj ext"
0x2b
get adj ext (hex)
byte value known as "adj gamma"
0x70
adj gamma (hex)
Response
Pos
Size
Name
Description
0
1
get adj ext
byte value known as "get adj ext"
0x2b
get adj ext (hex)
1
1
adj gamma
byte value known as "adj gamma"
0x70
adj gamma (hex)
2-5
4
actual value
actual value as DWORD
Content
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
6-9
4
minimum value
minimum value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
10-13
4
maximum value
maximum value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
14-17
4
step value
step value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
75
3. Commands
3.58 get ext phase, read
About this command
This command gets the ext phase value.
Request
Pos
Size
Name
0
1
get adj ext
1
1
adj phase
Description
Content
byte value known as "get adj ext"
0x2b
get adj ext (hex)
byte value known as "adj phase"
0x06
adj phase (hex)
Response
Pos
Size
Name
Description
0
1
get adj ext
byte value known as "get adj ext"
0x2b
get adj ext (hex)
1
1
adj phase
byte value known as "adj phase"
0x06
adj phase (hex)
2-5
4
actual value
actual value as DWORD
Content
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
6-9
4
minimum value
minimum value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
10-13
4
maximum value
maximum value
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
14-17
4
step value
step value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
76
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.59 get ext sharpness, read
About this command
This command gets the ext sharpness value.
Request
Pos
Size
Name
0
1
get adj ext
1
1
adj sharpness
Description
Content
byte value known as "get adj ext"
0x2b
get adj ext (hex)
byte value known as "adj sharpness"
0x05
adj sharpness (hex)
Response
Pos
Size
Name
Description
0
1
get adj ext
byte value known as "get adj ext"
0x2b
get adj ext (hex)
1
1
adj sharpness
byte value known as "adj sharpness"
0x05
adj sharpness (hex)
2-5
4
actual value
actual value as DWORD
Content
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
6-9
4
minimum value
minimum value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
10-13
4
maximum value
maximum value
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
14-17
4
step value
step value as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
77
3. Commands
3.60 get freeze status, read
About this command
This command gets the freeze status.
Request
Pos
Size
Name
0
1
get adj
1
1
adj freeze
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj freeze"
0x23
adj freeze (hex)
Response
78
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj freeze
byte value known as "adj freeze"
0x23
adj freeze (hex)
2
1
stutus
freeze status
0x00
unfrozen (hex)
0x01
frozen (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.61 get gamma, read
About this command
This command gets the gamma value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj gamma
Description
byte value known as "get adj"
Content
0x21
get adj (hex)
0x70
adj gamma (hex)
Response
Pos
Size
Name
0
1
get adj
1
1
adj gamma
2
1
value
R5905446 COMMAND CATALOG 08/06/2015
Description
byte value known as "get adj"
gamma value range 0->7
Content
0x21
get adj (hex)
0x70
adj gamma (hex)
gamma value (hex)
79
3. Commands
3.62 get gamma (text value), read
About this command
This command gets the gamma value as C-String.
Request
Pos
Size
Name
0
1
get adj
1
1
adj gamma
2
1
extension
Description
byte value known as "get adj"
extension to ask for C-String
Content
0x21
get adj (hex)
0x70
adj gamma (hex)
0x01
extension (hex)
Response
80
Pos
Size
Name
Description
0
1
get adj
1
1
adj gamma
2
1
extension
extension to ask for C-String
NA
NA
value
gamma value as C-String.
byte value known as "get adj"
Content
0x21
get adj (hex)
0x70
adj gamma (hex)
0x01
extension (hex)
value (string)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.63 get input black balance, read
About this command
This command gets the input black balance value of the active source.
This is applicable for the specified color.
Request
Pos
Size
0
1
get adj
Name
1
1
adj input black balance
2
1
color
Description
byte value known as "get adj"
color specification
Content
0x21
get adj (hex)
0x6E
adj input black balance (hex)
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
Response
Pos
Size
0
1
get adj
1
1
adj input black balance
2
1
color
3
1
Name
balance
Description
byte value known as "get adj"
color specification
balance value as byte
Content
0x21
get adj (hex)
0x6E
adj input black balance (hex)
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
balance (hex)
range -127 -> 127
R5905446 COMMAND CATALOG 08/06/2015
81
3. Commands
3.64 get input white balance, read
About this command
This command gets the input white balance value of the active source.
This is applicable for the specified color.
Request
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj input white balance
byte value known as
0x6f
adj input white balance (hex)
2
1
color
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
Content
"adj input white balance"
color specification
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj input white balance
byte value known as
0x6f
adj input white balance (hex)
2
1
color
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
Content
"adj input white balance"
3
1
balance
color specification
balance value as byte
balance (hex)
range -127 -> 127
82
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.65 get intensity, read
About this command
This command gets the intensity value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj intensity
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj intensity"
0xa4
adj intensity (hex)
Response
Pos
Size
Name
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj intensity
byte value known as "adj intensity"
0xa4
adj intensity (hex)
2
1
value
intensity value range 0->255
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
intensity value (hex)
83
3. Commands
3.66 get ir hold off configuration, read
About this command
This command gets the ir hold off configuration value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj ir hold off
configuration
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x92
adj ir hold off configuration
(hex)
"adj ir hold off configuration"
Response
Pos
Size
0
1
get adj
1
1
adj ir hold off
configuration
2
1
manual
manual status
3-6
4
Name
holdoff
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x92
adj ir hold off configuration
(hex)
0x00
auto (hex)
0x01
manual (hex)
"adj ir hold off configuration"
holdoff in seconds as DWORD
MSB (hex)
only needed in case of manual
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
84
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.67 get lamp status, read
About this command
This command gets the status of the lamp, on or off.
Request
Pos
Size
0
1
Name
read projector status
Description
byte value known as
Content
0x67
read projector status (hex)
0x40
mask for lamp status (hex)
"read projector status"
1
1
mask for lamp status
mask for lamp status
Response
Pos
Size
0
1
Name
read projector status
Description
byte value known as
Content
0x67
read projector status (hex)
"read projector status"
1
1
lamp status
R5905446 COMMAND CATALOG 08/06/2015
lamp status
0x40
on (hex)
0x00
off (hex)
85
3. Commands
3.68 get lamp status, read
About this command
This command gets the status of the lamp, on or off.
Request
Pos
Size
Name
0
1
lamp
1
1
read lamp status
Description
Content
byte value known as "lamp"
0x76
lamp (hex)
byte value known as
0x9a
read lamp status (hex)
"read lamp status"
Response
Pos
Size
Name
0
1
lamp
1
1
read lamp status
2
1
lamp status value
Description
Content
byte value known as "lamp"
0x76
lamp (hex)
byte value known as
0x9a
read lamp status (hex)
0x00
off (hex)
0x01
on (hex)
"read lamp status"
86
lamp status value
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.69 get layout, read
About this command
This command gets the active layout file name.
Request
Pos
Size
Name
0
1
get adj
1
1
adj layout
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj layout"
0x90
adj layout (hex)
Response
Pos
Size
Name
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj layout
byte value known as "adj layout"
0x90
adj layout (hex)
NA
NA
layout file name
layout file name as C-string
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
layout file name (string)
87
3. Commands
3.70 get lcd backlight level, read
About this command
This command reads the lcd backlight level.
Request
Pos
Size
Name
Description
Content
0
1
get adj
byte value known as "get adj"
1
1
lcd blacklight level
byte value known as "lcd backlight level" 0xa5
0x21
get adj (hex)
lcd backlight level (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
1
1
lcd blacklight level
byte value known as "lcd backlight level" 0xa5
lcd backlight level (hex)
2
1
level
backlight level
level (hex)
Content
0x21
get adj (hex)
range 0->255
88
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.71 get lcd time out, read
About this command
This command gets the lcd time out value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj lcd time out
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj lcd time out"
0xa3
adj lcd time out (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj lcd time out
byte value known as "adj lcd time out"
0xa3
adj lcd time out (hex)
2
1
value
lcd time out value in seconds
Content
lcd time out value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
89
3. Commands
3.72 get lock, read
About this command
This command gets the lock mode.
Request
Pos
Size
Name
0
1
get adj
1
1
adj lock
2
1
manual locking
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj lock"
0x99
adj lock (hex)
optional manual locking mode can be
sent in order to get the vertical refresh
reate
0xfd
manual locking mode (hex)
Response
Pos
Size
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj lock
byte value known as "adj lock"
0x99
adj lock (hex)
2
1
lock mode
lock mode
0x00
Free run at 60Hz (hex)
0x01
Lock to input 1 (hex)
0x02
Lock to input 2 (hex)
0x03
Lock to input 4 (hex)
0x04
Lock to input 4 (hex)
0xfd
manual lock (hex)
0xfe
lock to PIP (hex)
0xff
lock to Main window (hex)
3-6
90
4
Name
vertical refresh rate
Description
Content
In case of manual locking, the vertical
refresh rate can also be specified as
DWORD and represented in 1/10000
Hz. (e.g. 00 09 22 20 = 598560 =
59,856Hz)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.73 get no signal color logo, read
About this command
This command gets the blanking color value and logo status, used when no signal is connected.
Request
Pos
Size
Name
Description
Content
0
1
get adj
byte value known as "get adj"
1
1
adj no signal color
byte value known as "adj no signal color" 0x7b
0x21
get adj (hex)
adj no signal color (hex)
Response
Pos
Size
Name
0
1
get adj
byte value known as "get adj"
1
1
adj no signal color
byte value known as "adj no signal color" 0x7b
2
1
value
no signal logo status
3
1
red value
4
1
green value
5
1
blue value
Description
red value
Content
0x21
get adj (hex)
adj no signal color (hex)
0x00
off (hex)
0x01
on (hex)
red value (hex)
range 0->255
green value
green value (hex)
range 0->255
blue value
blue value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
91
3. Commands
3.74 get no signal shutdown delay, read
About this command
This command gets the no signal shutdown delay, expressed in number of seconds.
Request
Pos
Size
Name
0
1
get adj
1
1
adj no signal shutdown
2
1
delay
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj no signal
shutdown"
0x9a
adj no signal shutdown (hex)
byte value known as
0x02
delay (hex)
"no signal shutdown delay"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj no signal shutdown
byte value known as "adj no signal
shutdown"
0x9a
adj no signal shutdown (hex)
2
1
delay
byte value known as
0x02
delay (hex)
0x02
delay (hex)
Content
"no signal shutdown delay"
3
1
delay
byte value known as
"no signal shutdown delay"
4-7
4
delay value
delay in number of seconds as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
92
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.75 get no signal shutdown status, read
About this command
This command gets the no signal shutdown value."Enabled" or "Disabled".
Request
Pos
Size
Name
0
1
get adj
1
1
adj no signal shutdown
2
1
status
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x9a
adj no signal shutdown (hex)
0x01
status (hex)
"adj no signal shutdown"
byte value known as
"no signal shutdown status"
Response
Pos
Size
Name
0
1
get adj
1
1
adj no signal shutdown
2
1
status
3
1
value
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x9a
adj no signal shutdown (hex)
0x01
status (hex)
0x00
Disabled (hex)
0x01
Enabled (hex)
"adj no signal shutdown"
byte value known as
"no signal shutdown status"
R5905446 COMMAND CATALOG 08/06/2015
status value
93
3. Commands
3.76 get output window native resolution status, read
About this command
This command gets the output window native resolution status.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
output window
2
1
native resolution
native resolution
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x8d
adj window (hex)
0x16
native resolution (hex)
"adj output window"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
output window
byte value known as
0x8d
adj window (hex)
2
1
native resolution
native resolution
0x16
native resolution (hex)
3
1
value
value as WORD in big endian (MSB
LSB)
0
Off (dec)
1
On (dec)
Content
"adj output window"
94
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.77 get output window parameters, read
About this command
This command gets the output window parameters.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj output window
2
1
from index
from index specification as BYTE
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x8d
adj window (hex)
0
X-Offset (dec)
2
Y-Offset (dec)
4
Width (dec)
"adj output window"
3
1
to index
to index specification as BYTE
6
Height (dec)
0
X-Offset (dec)
2
Y-Offset (dec)
4
Width (dec)
6
Height (dec)
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj output window
2
1
from index
from index specification as BYTE
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x8d
adj window (hex)
0
X-Offset (dec)
2
Y-Offset (dec)
4
Width (dec)
"adj output window"
3
4
1
1
to index
window parameter
to index specification as BYTE
window parameter
6
Height (dec)
0
X-Offset (dec)
2
Y-Offset (dec)
4
Width (dec)
6
Height (dec)
MSB (hex)
LSB (hex)
About datafield 8 (window parameter)
- all window parameters are expressed as WORD in big endian (MSB LSB)
- the minimum number of parameters is 1
- the maximum number of parameters depends on the specified from and to index
R5905446 COMMAND CATALOG 08/06/2015
95
3. Commands
3.78 get output window status, read
About this command
This command gets the output window status.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
output window
2
1
status
status
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x8d
adj window (hex)
0x40
status (hex)
"adj output window"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
output window
byte value known as
0x8d
adj window (hex)
2
1
status
status
0x40
status (hex)
3
1
value
value as WORD in big endian (MSB
LSB)
0
Off (dec)
1
On (dec)
Content
"adj output window"
96
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.79 get P7 TCGD blue X, read
About this command
This command gets the P7 TCGD blue X value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD blue X
byte value known as
0x07
P7 TCGD blue X (hex)
"P7 TCGD blue X"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD blue X
byte value known as
0x07
P7 TCGD blue X (hex)
4-5
2
value
Content
"P7 TCGD blue X"
P7 TCGD blue X value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
97
3. Commands
3.80 get P7 TCGD blue Y, read
About this command
This command gets the P7 TCGD blue Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD blue Y
byte value known as
0x08
P7 TCGD blue Y (hex)
"P7 TCGD blue Y"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD blue Y
byte value known as
0x08
P7 TCGD blue Y (hex)
4-5
2
value
Content
"P7 TCGD blue Y"
P7 TCGD blue Y value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
98
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.81 get P7 TCGD cyan X, read
About this command
This command gets the P7 TCGD cyan X value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD cyan X
byte value known as
0x0d
P7 TCGD cyan X (hex)
"P7 TCGD cyan X"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD cyan X
byte value known as
0x0d
P7 TCGD cyan X (hex)
4-5
2
value
P7 TCGD cyan X value as WORD
Content
"P7 TCGD cyan X"
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
99
3. Commands
3.82 get P7 TCGD cyan Y, read
About this command
This command gets the P7 TCGD cyan Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD cyan Y
byte value known as
0x0e
P7 TCGD cyan Y (hex)
"P7 TCGD cyan Y"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD cyan Y
byte value known as
0x0e
P7 TCGD cyan Y (hex)
4-5
2
value
P7 TCGD cyan Y value as WORD
Content
"P7 TCGD cyan Y"
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
100
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.83 get P7 TCGD green Y, read
About this command
This command gets the P7 TCGD green Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD green Y
byte value known as
0x05
P7 TCGD green Y (hex)
"P7 TCGD green Y"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD green Y
byte value known as
0x05
P7 TCGD green Y (hex)
4-5
2
value
Content
"P7 TCGD green Y"
P7 TCGD green Y value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
101
3. Commands
3.84 get P7 TCGD magenta X, read
About this command
This command gets the P7 TCGD magenta X value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD magenta X
byte value known as
0x0a
P7 TCGD magenta X (hex)
"P7 TCGD magenta X"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD magenta X
byte value known as
0x0a
P7 TCGD magenta X (hex)
4-5
2
value
Content
"P7 TCGD magenta X"
P7 TCGD magenta X value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
102
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.85 get P7 TCGD magenta Y, read
About this command
This command gets the P7 TCGD magenta Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD magenta Y
byte value known as
0x0b
P7 TCGD magenta Y (hex)
"P7 TCGD magenta Y"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD magenta Y
byte value known as
0x0b
P7 TCGD magenta Y (hex)
4-5
2
value
Content
"P7 TCGD magenta Y"
P7 TCGD magenta Y value as WORD
MSB (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
103
3. Commands
3.86 get P7 TCGD red X, read
About this command
This command gets the P7 TCGD red X value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD red X
byte value known as "P7 TCGD red X"
0x01
P7 TCGD red X (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD red X
byte value known as "P7 TCGD red X"
0x01
P7 TCGD red X (hex)
4-5
2
value
P7 TCGD red X value as WORD
Content
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
104
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.87 get P7 TCGD red Y, read
About this command
This command gets the P7 TCGD red Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD red Y
byte value known as "P7 TCGD red Y"
0x02
P7 TCGD red Y (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD red Y
byte value known as "P7 TCGD red Y"
0x02
P7 TCGD red Y (hex)
4-5
2
value
P7 TCGD red Y value as WORD
Content
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
105
3. Commands
3.88 get P7 TCGD selection, read
About this command
This command gets the P7 TCGD selection.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
4
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD all
byte value known as "P7 TCGD all"
0x00
all (hex)
1
selection
request P7 selection
0x01
selection (hex)
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD all
byte value known as "P7 TCGD all"
0x00
all (hex)
4
1
selection
request P7 selection
0x01
selection (hex)
NA
NA
file name
name of file with the actual
Content
file name (string)
P7 TCGD values.
name as C-string
106
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.89 get P7 TCGD white X, read
About this command
This command gets the P7 TCGD white X value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD white X
byte value known as
0x13
P7 TCGD white X (hex)
"P7 TCGD white X"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD white X
byte value known as
0x13
P7 TCGD white X (hex)
4-5
2
value
Content
"P7 TCGD white X"
P7 TCGD white X value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
107
3. Commands
3.90 get P7 TCGD white Y, read
About this command
This command gets the P7 TCGD white Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD white Y
byte value known as
0x14
P7 TCGD white Y (hex)
"P7 TCGD white Y"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD white Y
byte value known as
0x14
P7 TCGD white Y (hex)
4-5
2
value
Content
"P7 TCGD white Y"
P7 TCGD white Y value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
108
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.91 get P7 TCGD yellow X, read
About this command
This command gets the P7 TCGD yellow X value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD yellow X
byte value known as
0x10
P7 TCGD yellow X (hex)
"P7 TCGD yellow X"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD yellow X
byte value known as
0x10
P7 TCGD yellow X (hex)
4-5
2
value
Content
"P7 TCGD yellow X"
P7 TCGD yellow X value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
109
3. Commands
3.92 get P7 TCGD yellow Y, read
About this command
This command gets the P7 TCGD yellow Y value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj P7
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
P7 TCGD yellow Y
byte value known as
0x11
P7 TCGD yellow Y (hex)
"P7 TCGD yellow Y"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD yellow Y
byte value known as
0x11
P7 TCGD yellow Y (hex)
4-5
2
value
Content
"P7 TCGD yellow Y"
P7 TCGD yellow Y value as WORD
MSB (hex)
LSB (hex)
About datafield 8 (value)
Word value = floating point value * 10000
110
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.93 get phase, read
About this command
This command gets the phase value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj phase
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj phase"
0x06
adj phase (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj phase
byte value known as "adj phase"
0x06
adj phase (hex)
2
1
value
phase value
Content
phase value (hex)
range 0->63
R5905446 COMMAND CATALOG 08/06/2015
111
3. Commands
3.94 get projector address, read
About this command
This command gets the projector address.
Request
Pos
0
Size
1
Name
projector address
Description
Content
byte value known as "projector address" 0x6d
projector address (hex)
Response
112
Pos
Size
0
1
projector address
Name
byte value known as "projector address" 0x6d
Description
projector address (hex)
1
1
address
address
address (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.95 get same lens settings status, read
About this command
This command gets the same lens settings status.
Request
Pos
Size
Name
0
1
get adj
1
1
adj same lens settings
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0xa2
adj same lens settings (hex)
"adj same lens settings"
Response
Pos
Size
Name
0
1
get adj
1
1
adj same lens settings
2
1
status
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0xa2
adj same lens settings (hex)
0x00
layout specific (hex)
0x01
same for all layouts (hex)
"adj same lens settings"
R5905446 COMMAND CATALOG 08/06/2015
same lens settings status
113
3. Commands
3.96 get saturation, read
About this command
This command gets the saturation value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj saturation
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj saturation"
0x03
adj saturation (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj saturation
byte value known as "adj saturation"
0x03
adj saturation (hex)
2
1
value
saturation value
Content
saturation value (hex)
range 0->255
114
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.97 get scan/orientation configuration , read
About this command
This command gets the scan/orientation configuration.
Request
Pos
Size
Name
0
1
get adj
1
1
adj scan
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj scan"
0x24
adj scan (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj scan
byte value known as "adj scan"
0x24
adj scan (hex)
2
1
orientation
Upper nibble (bit 7 -> bit 4)
0x40
Front-Table (hex)
Orientation configuration
0x80
Front-Ceiling (hex)
0x40 = Front/Table
0x00
Rear-Table (hex)
0x80 = Front/Ceiling
0xc0
Rear-Ceiling (hex)
0x00 = Rear/Table
0x01
Auto-Front (hex)
0xC0 = Rear/Ceiling
0x02
Auto-Rear (hex)
Content
Lower nibble (bit 3 -> bit 0)
Auto configuration
0x01 = auto front
0x02 = auto rear
R5905446 COMMAND CATALOG 08/06/2015
115
3. Commands
3.98 get sharpness, read
About this command
This command gets the sharpness value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj sharpness
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj sharpness"
0x05
adj sharpness (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj sharpness
byte value known as "adj sharpness"
0x05
adj sharpness (hex)
2
1
value
sharpness value
Content
sharpness value (hex)
range 0->31
116
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.99 get shutter status, read
About this command
This command gets the shutter status.
Request
Pos
Size
Name
0
1
get adj
1
1
adj shutter
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj shutter"
0x42
adj shutter (hex)
Response
Pos
Size
Name
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj shutter
byte value known as "adj shutter"
0x42
adj shutter (hex)
2
1
status
status value
0x00
closed (hex)
0x01
open (hex)
0x02
in between (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
117
3. Commands
3.100 get soft edge black level, read
About this command
This command gets the soft edge black level value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge black level
2
1
color
color
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x84
adj soft edge black level
(hex)
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
"adj soft edge black level"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj soft edge black level
byte value known as
0x84
adj soft edge black level
(hex)
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
Content
"adj soft edge black level"
2
3
118
1
1
color
value
color
soft edge black level value range 0->255
black level value (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.101 get soft edge size black level bottom, read
About this command
This command gets the soft edge size black level bottom value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
bottom
"soft edge size black level bottom"
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x05
soft edge size black level
bottom (hex)
"adj soft edge size"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
bottom
"soft edge size black level bottom"
3-4
2
soft edge size black level soft edge size black level bottom
bottom
as WORD
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x05
soft edge size black level
bottom (hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
R5905446 COMMAND CATALOG 08/06/2015
119
3. Commands
3.102 get soft edge size black level left, read
About this command
This command gets the soft edge size black level left value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
left
"soft edge size black level left"
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x06
soft edge size black level left
(hex)
"adj soft edge size"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
left
"soft edge size black level left"
3-4
2
soft edge size black level soft edge size black level left
black level left
as WORD
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x06
soft edge size black level left
(hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
120
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.103 get soft edge size black level right, read
About this command
This command gets the soft edge size black level right value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
right
"soft edge size black level right"
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x07
soft edge size black level
right (hex)
"adj soft edge size"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
right
"soft edge size black level right"
3-4
2
soft edge size black level soft edge size black level right
right
as WORD
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x07
soft edge size black level
right (hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
R5905446 COMMAND CATALOG 08/06/2015
121
3. Commands
3.104 get soft edge size black level top, read
About this command
This command gets the soft edge size black level top value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
top
"soft edge size black level top"
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x04
soft edge size black level top
(hex)
"adj soft edge size"
Response
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
top
"soft edge size black level top"
3-4
2
soft edge size black level soft edge size black level top
top
as WORD
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x04
soft edge size black level top
(hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
122
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.105 get soft edge size bottom, read
About this command
This command sets the soft edge size bottom value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size bottom
byte value known as
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x01
soft edge size bottom (hex)
"adj soft edge size"
"soft edge size bottom"
Response
Pos
Size
Name
Description
Content
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size bottom
byte value known as
3-4
2
soft edge size bottom
soft edge size bottom as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x01
soft edge size bottom (hex)
"adj soft edge size"
"soft edge size bottom"
R5905446 COMMAND CATALOG 08/06/2015
123
3. Commands
3.106 get soft edge size left, read
About this command
This command gets the soft edge size left value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size left
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x02
soft edge size left (hex)
"adj soft edge size"
byte value known as
"soft edge size left"
Response
Pos
Size
Name
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size left
3-4
2
soft edge size left
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x02
soft edge size left (hex)
"adj soft edge size"
byte value known as
"soft edge size left"
124
soft edge size left as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.107 get soft edge size right, read
About this command
This command gets the soft edge size right value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size right
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x03
soft edge size right (hex)
"adj soft edge size"
byte value known as
"soft edge size right"
Response
Pos
Size
Name
Description
Content
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size right
byte value known as
3-4
2
soft edge size right
soft edge size right as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x03
soft edge size right (hex)
"adj soft edge size"
"soft edge size right"
R5905446 COMMAND CATALOG 08/06/2015
125
3. Commands
3.108 get soft edge size top, read
About this command
This command gets the soft edge size top value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size top
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x00
soft edge size top (hex)
"adj soft edge size"
byte value known as
"soft edge size top"
Response
Pos
Size
Name
Description
Content
0
1
get adj
1
1
adj soft edge size
2
1
soft edge size top
byte value known as
3-4
2
soft edge size top
soft edge size top as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x00
soft edge size top (hex)
"adj soft edge size"
"soft edge size top"
126
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.109 get soft edge status, read
About this command
This command gets the soft edge status.
Request
Pos
Size
Name
0
1
get adj
1
1
adj soft edge status
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x82
adj soft edge status (hex)
"adj soft edge status"
Response
Pos
Size
Name
0
1
get adj
1
1
adj soft edge status
2
1
status
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as
0x82
adj soft edge status (hex)
"adj soft edge status"
soft edge status
soft edge status (hex)
bit 0 =
soft edge/scenergix enabled
bit 1 =
white level alignment lines enabled
bit 2 =
black level alignment lines enabled
bit 3 =
data doubling enabled
R5905446 COMMAND CATALOG 08/06/2015
127
3. Commands
3.110 get source, read
About this command
This command gets the source selection for the active window.
Request
Pos
0
Size
1
Name
get source
Description
get source selection
Content
0x32
get source (hex)
Response
128
Pos
Size
0
1
get source
Name
get source selection
Description
0x32
get source (hex)
1
1
source selection
source selection
0x01
input 1 (hex)
0x02
input 2 (hex)
Content
0x03
input 3 (hex)
0x04
input 4 (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.111 get source extended, read
About this command
This command gets the source extended value.
Request
Pos
Size
Name
Description
0
1
get source extended
get source extended
1
1
from index
from index
Content
0x34
get source ext (hex)
from index (hex)
index = 0
=> return active source selection
(input 1 = 0x01 -> input 4 = 0x04)
index = 1 => return module mode
index = 2 => return module type
index = 3
=> return module configuration 1
index = 4
=> return module configuration 2
index = 5
=> return module configuration 3
2
1
to index
to index
to index (hex)
index = 0
=> return active source selection
(input 1 = 0x01 -> input 4 = 0x04)
index = 1 => return module mode
index = 2 => return module type
index = 3
=> return module configuration 1
index = 4
=> return module configuration 2
index = 5
=> return module configuration 3
Response
Pos
Size
Name
Description
0
1
get source extended
get source extended
1
1
from index
from index
Content
0x34
get source ext (hex)
from index (hex)
index = 0
=> return active source selection
(input 1 = 0x01 -> input 4 = 0x04)
index = 1 => return module mode
index = 2 => return module type
index = 3
=> return module configuration 1
index = 4
=> return module configuration 2
index = 5
=> return module configuration 3
R5905446 COMMAND CATALOG 08/06/2015
129
3. Commands
Pos
Size
2
1
Name
to index
Description
Content
to index
to index (hex)
index = 0
=> return active source selection
(input 1 = 0x01 -> input 4 = 0x04)
index = 1 => return module mode
index = 2 => return module type
index = 3
=> return module configuration 1
index = 4
=> return module configuration 2
index = 5
=> return module configuration 3
3
1
response data
- number of bytes depends on the from
and to index:
response data (hex)
at least one and at most 6 bytes will be
returned.
- content depends on module type
About datafield 6 (response data)
module types
0x00 = No modul
0x01 = DVI/RGB analog
0x02 = SDI
0x03 = 5-Cable
0x04 = HDMI / DP
module modes
DVI/RGB analog
0x00 = dvi mode
0x01 = rgb analog hs-vs/cs
0x02 = yuv analog hs-vs/cs
0x03 =dual link DVI
SDI
0x00 = Input 1 (SD, HD or 3G)
0x01 = Input 2 (SD, HD or 3G)
0x02 = Input 1 priority over input 2 (SD, HD or 3G)
0x03 = Input 2 priority over input1 (SD, HD or 3G)
0x04 = DUAL HDSDI (uses both inputs)
0x05 = 2xHD (3D only - uses both inputs)
HDMI / DP
0x00 = HDMI
0x01 = Display Port
5-Cable:
0x00 = RGB HS/VS
0x01 = RGB CV: RGB with composite video on HS BNC
0x02 = RGB SOG: RGB with composite sync on G (G/Y/VIDEO BNC)
0x03 = YUV HS/VS
0x04 = YUV CV: YUV with composite video on HS BNC
130
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
0x05 = YUV SOY: RGB with composite sync on Y (G/Y/VIDEO BNC)
0x06 = CVBS: composite video on G/Y/VIDEO BNC
0x07 = S-VIDEO: separate video with Y on G/Y/VIDEO BNC and Cr on V/Cr BNC
Auto configuration is provided via the next modes:
0x08 = RGB AUTO: to do auto configuration between modes 0, 1 and 2
0x09 = YUV AUTO: to do auto configuration between modes 3, 4 and 5
0x0a = CVBS/S-VIDEO AUTO: to do auto configuration between modes 6 and 7
module configurations 1
SDI
0x00 = 4:2:2 YCbCr 10b
0x01 = 4:4:4 YCbCr 10b
0x02 = 4:4:4 RGB 10b
0x03 = 4:4:4 YCbCr 12b
0x04 = 4:4:4 RGB 12b
0x05 = 4:2:2 YCbCr 12b
module configurations 2
SDI
0x00 = Dual: Normal
0x01 = Dual: Swap links
module configurations 3
SDI
0x00 = 3G: Dual HD
0x01 = 3G: Direct mapping
0x02 = 3G-B: 2xHD (3D-only)
R5905446 COMMAND CATALOG 08/06/2015
131
3. Commands
3.112 get text on, read
About this command
This command gets the text on status.
Request
Pos
Size
Name
0
1
get adj
1
1
adj text on
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj text on"
0x93
adj text on (hex)
Response
132
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj text on
byte value known as "adj text on"
0x93
adj text on (hex)
2
1
text on status
text on status
Content
0x00
off (hex)
0x01
on (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.113 get tint, read
About this command
This command gets the tint value of the active source.
Request
Pos
Size
Name
0
1
get adj
1
1
adj tint
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj tint"
0x04
adj tint (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj tint
byte value known as "adj tint"
0x04
adj tint (hex)
2
1
value
tint value
Content
tint value (hex)
range 0->128
R5905446 COMMAND CATALOG 08/06/2015
133
3. Commands
3.114 get warp axis position, read
About this command
This command gets the warp axis position. This is the center used for the rotation command. Valid from v1.6.
Request
Pos
Size
Name
Description
Content
0
1
get adj
1
1
adj warp
2
1
warp axis position
byte value known as "warp axis position" 0x30
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp axis position (hex)
Response
Pos
Size
0
1
Name
Description
Content
get adj
byte value known as "get adj"
0x21
get adj (hex)
0xa1
adj warp (hex)
1
1
adj warp
byte value known as "adj warp"
2
1
warp axis position
byte value known as "warp axis position" 0x30
warp axis position (hex)
3-6
4
axis position X value
X value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
7-10
4
axis position Y value
Y value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
134
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.115 get warp file, read
About this command
This command gets the active warp file.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp file
byte value known as "warp file"
0x80
warp file (hex)
action parameter
optional action parameter.
0x01
get a filelist of warp files in
xlm format (hex)
If this parameter is omitted, the active
file is returned. Otherwise a file list of
warp files is returned in xml format.
Response
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp file
byte value known as "warp file"
0x80
warp file (hex)
action parameter
optional action parameter.
0x01
get a filelist of warp files in
xlm format (hex)
If this parameter is omitted, the active
file is returned. Otherwise a file list of
warp files is returned in xml format.
NA
NA
file name
active warp file name as C-string if
optional parameter is omitted.
file name (string)
NA
NA
file list
file list in xml format as C-string if
optional parameter is 0x01.
file list (string)
R5905446 COMMAND CATALOG 08/06/2015
135
3. Commands
3.116 get warp grid size, read
About this command
This command gets the warp grid size value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp grid size
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp grid size"
0x18
warp grid size (hex)
Response
Pos
Size
0
1
Name
Description
Content
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp grid size
byte value known as "warp grid size"
0x18
warp grid size (hex)
3
1
ver number of grid lines
vertical numbers of grid lines
only 2, 3, 5, 9, 17 and 33 are valid
numbers
4
1
hor number of grid lines
horizontal number of grid lines
only 2, 3, 5, 9, 17 and 33 are valid
numbers
136
ver number of grid lines
(hex)
hor number of grid lines
(hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.117 get warp hierarchic keystone in X direction, read
About this command
This command gets the hierarchic warp keystone value in X direction.
Valid from v1.6.
Request
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic keystone
in X direction
byte value known as "warp hierarchic
keystone in X direction"
0x53
warp hierarchic keystone in
X direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
Response
Pos
Size
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic keystone
in X direction
byte value known as "warp hierarchic
keystone in X direction"
0x53
warp hierarchic keystone in
X direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
keystone in X direction
Description
keystone in X direction value as float
(IEE-754 4bytes)
Content
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
137
3. Commands
3.118 get warp hierarchic keystone in Y direction, read
About this command
This command gets the hierarchic warp keystone value in Y direction.
Valid from v1.6.
Request
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic keystone
in Y direction
byte value known as "warp hierarchic
keystone in Y direction"
0x54
warp hierarchic keystone in
Y direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
Response
Pos
Size
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic keystone
in Y direction
byte value known as "warp hierarchic
keystone in Y direction"
0x54
warp hierarchic keystone in
Y direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
keystone in Y direction
Description
Content
keystone in Y direction value as float
(IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
138
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.119 get warp hierarchic linearity in X direction, read
About this command
This command gets the hierarchic warp linearity value in X direction.
Valid from v1.6.
Request
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic linearity
in X direction
byte value known as "warp hierarchic
linearity in X direction"
0x51
warp hierarchic linearity in X
direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
Response
Pos
Size
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic linearity
in X direction
byte value known as "warp hierarchic
linearity in X direction"
0x51
warp hierarchic linearity in X
direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
linearity in X direction
Description
linearity in X direction value as float
(IEE-754 4bytes)
Content
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
139
3. Commands
3.120 get warp hierarchic linearity in Y direction, read
About this command
This command gets the hierarchic warp linearity value in Y direction.
Valid from v1.6.
Request
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic linearity
in Y direction
byte value known as "warp hierarchic
linearity in Y direction"
0x52
warp hierarchic linearity in Y
direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
Response
Pos
Size
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic linearity
in Y direction
byte value known as "warp hierarchic
linearity in Y direction"
0x52
warp hierarchic linearity in Y
direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
linearity in Y direction
Description
Content
linearity in Y direction value as float
(IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
140
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.121 get warp hierarchic point shift, read
About this command
This command gets the hierarchic warp point shift value.
Valid from v1.6.
Request
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic point
shift horizontal
byte value known as "warp hierarchic
point shift"
0x50
warp hierarchic point shift
(hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
4
1
X position
X position of the pixel to shift
X position (0 - 32) (hex)
5
1
Y position
Y position of the pixel to shift
Y position (0 - 32) (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic point
shift horizontal
byte value known as "warp hierarchic
point shift"
0x50
warp hierarchic point shift
(hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
4
1
X position
X position of the pixel to shift
X position (0 - 32) (hex)
5
1
Y position
Y position of the pixel to shift
Y position (0 - 32) (hex)
6-9
4
X shift value
X shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
10-13
4
Y shift value
Y shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
141
3. Commands
3.122 get warp keystone horizontal. Deprecated from version 1.6, read
About this command
This command gets the warp keystone horizontal value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj warp
2
1
warp keystone horizontal byte value known as
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
0x02
warp keystone horizontal
(hex)
"warp keystone horizontal"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp keystone horizontal byte value known as
0x02
warp keystone horizontal
(hex)
Content
"warp keystone horizontal"
3-6
4
keystone value
keystone value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
142
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.123 get warp keystone vertical. Deprecated from version 1.6, read
About this command
This command gets the warp keystone vertical value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp keystone vertical
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x01
warp keystone vertical (hex)
"warp keystone vertical"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp keystone vertical
byte value known as
0x01
warp keystone vertical (hex)
Content
"warp keystone vertical"
3-6
4
keystone value
keystone value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
143
3. Commands
3.124 get warp line shift horizontal. Deprecated from version 1.6, read
About this command
This command gets the warp line shift horizontal value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp line shift horizontal
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x16
warp line shift horizontal
(hex)
"warp line shift horizontal"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp line shift horizontal
byte value known as
0x16
warp line shift horizontal
(hex)
Content
"warp line shift horizontal"
3-6
4
line shift value
line shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
144
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.125 get warp line shift vertical. Deprecated from version 1.6, read
About this command
This command gets the warp line shift vertical value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp line shift vertical
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x15
warp line shift vertical (hex)
"warp line shift vertical"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp line shift vertical
byte value known as
0x15
warp line shift vertical (hex)
Content
"warp line shift vertical"
3-6
4
line shift value
line shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
145
3. Commands
3.126 get warp linearity horizontal. Deprecated from version 1.6, read
About this command
This command gets the warp linearity horizontal value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp linearity horizontal
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x0f
warp linearity horizontal
(hex)
"warp linearity horizontal"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp linearity horizontal
byte value known as
0x0f
warp linearity horizontal
(hex)
Content
"warp linearity horizontal"
3-6
4
linearity value
linearity value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE2 (hex)
BYTE 3 (hex)
146
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.127 get warp linearity vertical. Deprecated from version 1.6, read
About this command
This command gets the warp linearity vertical value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp linearity vertical
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x10
warp linearity vertical (hex)
"warp linearity vertical"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp linearity vertical
byte value known as
0x10
warp linearity vertical (hex)
Content
"warp linearity vertical"
3-6
4
linearity value
linearity value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
147
3. Commands
3.128 get warp pin barrel horizontal. Deprecated from version 1.6, read
About this command
This command gets the warp pin barrel horizontal value.
Request
Pos
Size
Name
Description
0
1
get adj
1
1
adj warp
2
1
warp pin barrel horizontal byte value known as
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
0x0e
warp pin barrel horizontal
(hex)
"warp pin barrel horizontal"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp pin barrel horizontal byte value known as
0x0e
warp pin barrel horizontal
(hex)
Content
"warp pin barrel horizontal"
3-6
4
barrel value
barrel value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
148
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.129 get warp pin barrel vertical. Deprecated from version 1.6, read
About this command
This command gets the warp pin barrel vertical value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp pin barrel vertical
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x0d
warp pin barrel vertical (hex)
"warp pin barrel vertical"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp pin barrel vertical
byte value known as
0x0d
warp pin barrel vertical (hex)
Content
"warp pin barrel vertical"
3-6
4
barrel value
barrel value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
149
3. Commands
3.130 get warp point shift. Deprecated from version 1.6, read
About this command
This command gets the warp point shift value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp point shift
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp point shift"
0x17
warp point shift (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp point shift
byte value known as "warp point shift"
0x17
warp point shift (hex)
3-6
4
X shift value
X shift value as float (IEE-754 4bytes)
Content
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
7-10
4
Y shift value
Y shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
150
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.131 get warp rotation, read
About this command
This command gets the warp rotation value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp rotation
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp rotation"
0x03
warp rotation (hex)
Response
Pos
Size
0
1
Name
Description
Content
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp rotation
byte value known as "warp rotation"
0x03
warp rotation (hex)
3-6
4
angle value
angle value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
151
3. Commands
3.132 get warp scale horizontal., read
About this command
This command gets the warp scale horizontal value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp scale horizontal
byte value known as
0x12
warp scale horizontal (hex)
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
"warp scale horizontal"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp scale horizontal
byte value known as
0x12
warp scale horizontal (hex)
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
Content
"warp scale horizontal"
3
1
warp area
0x08
4-7
4
scale value
scale value as float (IEE-754 4bytes)
right bottom area (hex)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
152
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.133 get warp scale vertical., read
About this command
This command gets the warp scale vertical value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
3
1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp scale vertical
byte value known as
0x11
warp scale vertical (hex)
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
"warp scale vertical"
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp scale vertical
byte value known as
0x11
warp scale vertical (hex)
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
Content
"warp scale vertical"
3
1
warp area
0x08
4-7
4
scale value
scale value as float (IEE-754 4bytes)
right bottom area (hex)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
153
3. Commands
3.134 get warp shift horizontal, read
About this command
This command gets the warp shift horizontal value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp shift horizontal
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x14
warp shift horizontal (hex)
"warp shift horizontal"
Response
Pos
Size
0
1
get adj
Name
byte value known as "get adj"
Description
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp shift horizontal
byte value known as
0x14
warp shift horizontal (hex)
Content
"warp shift horizontal"
3-6
4
line shift value
line shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
154
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.135 get warp shift vertical, read
About this command
This command gets the warp shift vertical value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp shift vertical
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp shift vertical"
0x13
warp shift vertical (hex)
Response
Pos
Size
Name
Description
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp shift vertical
byte value known as "warp shift vertical"
0x13
warp shift vertical (hex)
3-6
4
line shift value
line shift value as float (IEE-754 4bytes)
Content
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
155
3. Commands
3.136 get warp status, read
About this command
This command gets the warp status value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp status
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp status"
0x00
warp status (hex)
Response
Pos
Size
0
1
get adj
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp status
byte value known as "warp status"
0x00
warp status (hex)
3
1
status value
status value
0x00
off (hex)
0x01
on (with commands) (hex)
4-5
2
Name
optional warp enable
command fields
Description
Content
2 byte bit field is added when status =
0x01
0x02
on (with files) (hex)
0xff
no warp available (hex)
move
deprecated from version 1.6
points (bit)
shift
grid
line
deprecated from version 1.6
(bit)
lindeprecated from version 1.6
earity (bit)
pindeprecated from version 1.6
cush(bit)
ion
barrel
keystone
deprecated from version 1.6
(bit)
scale
shift
rotate
Hierarchic
points
unused
unused
unused
unused
unused
unused
four
deprecated from version 1.6
corner (bit)
156
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.137 get warp X1. Deprecated from version 1.6, read
About this command
This command gets the warp X1 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp X1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp X1"
0x05
warp X1 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp X1
byte value known as "warp X1"
0x05
warp X1 (hex)
3-6
4
X1 value
X1 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
157
3. Commands
3.138 get warp X2. Deprecated from version 1.6, read
About this command
This command gets the warp X2 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp X2
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp X2"
0x07
warp X2 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp X2
byte value known as "warp X2"
0x07
warp X2 (hex)
3-6
4
X2 value
X2 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
158
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.139 get warp X3. Deprecated from version 1.6, read
About this command
This command gets the warp X3 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp X3
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp X3"
0x09
warp X3 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp X3
byte value known as "warp X3"
0x09
warp X3 (hex)
3-6
4
X3 value
X3 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
159
3. Commands
3.140 get warp X4. Deprecated from version 1.6, read
About this command
This command gets the warp X4 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp X4
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp X4"
0x0b
warp X4 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp X4
byte value known as "warp X4"
0x0b
warp X4 (hex)
3-6
4
X4 value
X4 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
160
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.141 get warp Y1. Deprecated from version 1.6, read
About this command
This command gets the warp Y1 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp Y1
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp Y1"
0x06
warp Y1 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp Y1
byte value known as "warp Y1"
0x06
warp Y1 (hex)
3-6
4
Y1 value
Y1 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
161
3. Commands
3.142 get warp Y2. Deprecated from version 1.6, read
About this command
This command gets the warp Y2 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp Y2
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp Y2"
0x08
warp Y2 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp Y2
byte value known as "warp Y2"
0x08
warp Y2 (hex)
3-6
4
Y2 value
Y2 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
162
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.143 get warp Y3. Deprecated from version 1.6, read
About this command
This command gets the warp Y3 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp Y3
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp Y3"
0x0a
warp Y3 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp Y3
byte value known as "warp Y3"
0x0a
warp Y3 (hex)
3-6
4
Y3 value
Y3 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
163
3. Commands
3.144 get warp Y4. Deprecated from version 1.6, read
About this command
This command gets the warp Y4 value.
Request
Pos
Size
Name
0
1
get adj
1
1
adj warp
2
1
warp Y4
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as "warp Y4"
0x0c
warp Y4 (hex)
Response
Pos
Size
0
1
Name
get adj
Description
Content
byte value known as "get adj"
0x21
get adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp Y4
byte value known as "warp Y4"
0x0c
warp Y4 (hex)
3-6
4
Y4 value
Y4 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
164
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.145 get window selection, read
About this command
This command gets the window selected for adjustments.
Request
Pos
Size
Name
0
1
window
1
1
get window selection
Description
Content
byte value known as "window"
0x8f
window (hex)
byte value known as
0x08
get window selection (hex)
"get window selection"
Response
Pos
Size
Name
0
1
window
1
1
get window selection
2
1
selection
Description
Content
byte value known as "window"
0x8f
window (hex)
byte value known as
0x08
get window selection (hex)
0x00
Main (hex)
0x01
PIP (hex)
"get window selection"
R5905446 COMMAND CATALOG 08/06/2015
window selection
165
3. Commands
3.146 increment blanking bottom, write
About this command
This command increments the blanking bottom by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj blanking bottom
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as
0x4d
adj blanking bottom (hex)
"adj blanking bottom"
166
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.147 increment blanking left, write
About this command
This command increments the blanking left by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj blanking left
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as "adj blanking left"
0x4e
adj blanking left (hex)
167
3. Commands
3.148 increment blanking right, write
About this command
This command increments the blanking right by one.
Request
168
Pos
Size
Name
0
1
inc adj
1
1
adj blanking right
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as "adj blanking right"
0x4f
adj blanking right (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.149 increment blanking top, write
About this command
This command increments the blanking top by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj blanking top
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as "adj blanking top"
0x45
adj blanking top (hex)
169
3. Commands
3.150 increment brightness, write
About this command
This command increments the brightness by one.
Request
170
Pos
Size
0
1
Name
increment brightness
Description
increment brightness
Content
0x03
inc brightness (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.151 increment color balance blue green, write
About this command
This command increments the color balance blue green by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj color balance blue
green
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as
0x44
adj color balance blue green
(hex)
"adj color balance blue green"
171
3. Commands
3.152 increment color balance red green, write
About this command
This command increments the color balance red green by one.
Request
172
Pos
Size
Name
0
1
inc adj
1
1
adj color balance red
green
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as
0x43
adj color balance red green
(hex)
"adj color balance red green"
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.153 increment contrast, write
About this command
This command increments the contrast by one.
Request
Pos
Size
0
1
Name
increment contrast
R5905446 COMMAND CATALOG 08/06/2015
Description
increment contrast
Content
0x01
increment contrast (hex)
173
3. Commands
3.154 increment dimming value, write
About this command
This command increments the dimming value by one.
The higher the value the brighter the light output.
Request
174
Pos
Size
0
1
inc adj
Name
byte value known as "inc adj"
Description
0x22
inc adj (hex)
1
1
adj dimming
byte value known as "adj dimming"
0x0d
adj dimming (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.155 increment gamma, write
About this command
This command increments the gamma by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj gamma
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as "adj gamma"
0x70
adj gamma (hex)
175
3. Commands
3.156 increment input black balance, write
About this command
This command increments the input black balance by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj input black balance
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as
0x6e
adj input black balance (hex)
"adj input black balance"
176
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.157 increment input white balance, write
About this command
This command increments the input white balance by one.
Request
Pos
Size
Name
0
1
inc adj
1
1
adj input white balance
Description
Content
byte value known as "inc adj"
0x22
inc adj (hex)
byte value known as
0x6f
adj input white balance (hex)
"adj input white balance"
R5905446 COMMAND CATALOG 08/06/2015
177
3. Commands
3.158 increment phase, write
About this command
This command increments the phase by one.
Request
178
Pos
Size
0
1
Name
increment phase
Description
increment phase
Content
0x0B
inc phase (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.159 increment saturation, write
About this command
This command increments the saturation by one.
Request
Pos
Size
0
1
Name
increment saturation
R5905446 COMMAND CATALOG 08/06/2015
Description
increment saturation
Content
0x05
inc saturation (hex)
179
3. Commands
3.160 increment sharpness, write
About this command
This command increments the sharpness by one.
Request
180
Pos
Size
0
1
Name
increment sharpness
Description
increment sharpness
Content
0x09
inc sharpness (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.161 increment shutter, write
About this command
This command opens the shutter.
Request
Pos
Size
0
1
inc adj
Name
byte value known as "inc adj"
0x22
inc adj (hex)
1
1
adj shutter
byte value known as "adj shutter"
0x42
adj shutter (hex)
2
1
value
value should be 0x00 in order to be
valid.
0x00
value (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
181
3. Commands
3.162 increment tint, write
About this command
This command increments the tint by one.
Request
182
Pos
Size
0
1
Name
increment tint
Description
increment tint
Content
0x07
increment tint (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.163 input format horizontal total possible, read
About this command
This command checks if input format horizontal total adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj input format
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj input format"
0x8e
input format (hex)
Response
Pos
Size
Name
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj input format
value known as "adj input format"
0x8e
input format (hex)
2
1
possible
adjustment is possible or not
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
0x00
not possible (hex)
0x01
possible (hex)
183
3. Commands
3.164 phase possible, read
About this command
This command checks if phase adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj phase
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj phase"
0x06
phase (hex)
Response
184
Pos
Size
Name
Description
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj phase
value known as "adj phase"
0x06
phase (hex)
2
1
possible
adjustment is possible or not
Content
0x00
not possible (hex)
0x01
possible (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.165 read auto picture alignment configuration, read
About this command
This command reads the auto picture alignment configuration.
Request
Pos
Size
Name
0
1
file
1
1
read auto picture
alignment
Description
Content
byte value known as "file"
0xbd
file (hex)
byte value known as
0x88
read auto picture alignment
(hex)
"read auto picture alignment"
Response
Pos
Size
Name
0
1
file
1
1
read auto picture
alignment
2
1
configuration
configuration
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "file"
0xbd
file (hex)
byte value known as
0x88
read auto picture alignment
(hex)
0x00
at file load (hex)
0x01
off (hex)
0x02
always (hex)
"read auto picture alignment"
185
3. Commands
3.166 read barscale position, read
About this command
This command reads the barscale position.
Request
Pos
Size
Name
0
1
projector info
1
1
read barscale position
Description
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as
0x02
read barscale position (hex)
"read barscale position"
Response
Pos
Size
0
1
Name
Description
projector info
1
1
read barscale position
2
1
position
position value
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as
0x02
read barscale position (hex)
0x11
Top Left (hex)
0x12
Top Mid (hex)
0x13
Top Right (hex)
0x21
Mid Left (hex)
0x22
Mid Mid (hex)
0x23
Mid Right (hex)
0x31
Bottom Left (hex)
"read barscale position"
186
0x32
Bottom Mid (hex)
0x33
Bottom Right (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.167 read customer id, read
About this command
This command reads the customer id.
Request
Pos
Size
0
1
projector info
Name
byte value known as "projector info"
Description
0xf5
projector info (hex)
Content
1
1
read customer id
byte value known as "read customer id"
0x01
read customer id (hex)
Response
Pos
Size
Name
0
1
projector info
byte value known as "projector info"
0xf5
projector info (hex)
1
1
read customer id
byte value known as "read customer id"
0x01
read customer id (hex)
NA
NA
customer ID
customer ID as C-string
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
customer ID (string)
187
3. Commands
3.168 read date time, read
About this command
This command reads date and time.
Request
Pos
Size
0
1
projector info
Name
byte value known as "projector info"
Description
0xf5
projector info (hex)
Content
1
1
read date time
byte value known as "read date time"
0x05
read date time (hex)
Response
Pos
Size
Name
Description
0
1
projector info
byte value known as "projector info"
0xf5
projector info (hex)
1
1
read date time
byte value known as "read date time"
0x05
read date time (hex)
NA
NA
date and time
date and time as C-string
Content
date and time (string)
in following format: YYYY.MM.DDhh:mm
About datafield 4 (date and time)
YYYY 4-digit for the Year
MM 2-digit for the Month
DD 2-digit for the Day
hh 2-digiti for the Hour
mm 2-digit for the Minutes
188
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.169 read DMX address, read
About this command
This command reads the DMX address.
Request
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
Content
1
1
read DMX address
byte value known as
0x40
read DMX address (hex)
"read DMX address"
Response
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
1
1
read DMX address
byte value known as
0x40
read DMX address (hex)
2-3
2
DMX address
DMX address as WORD
MSB (hex)
range 1 -> 512
LSB (hex)
Content
"read DMX address"
R5905446 COMMAND CATALOG 08/06/2015
189
3. Commands
3.170 read DMX mode, read
About this command
This command reads the DMX mode.
Request
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
Content
1
1
read DMX mode
byte value known as
0x42
read DMX mode (hex)
"read DMX mode"
Response
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
1
1
read DMX mode
byte value known as
0x42
read DMX mode (hex)
2
1
mode
0x00
full (hex)
0x01
basic (hex)
0x02
extended (hex)
Content
"read DMX mode"
190
DMX mode
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.171 read DMX universe, read
About this command
This command reads the DMX universe applicable to Art-Net.
Request
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
Content
1
1
read DMX universe
byte value known as
0x45
read DMX universe (hex)
"read DMX universe"
Response
Pos
Size
0
1
dmx
Name
byte value known as Dmx
Description
0x57
dmx (hex)
1
1
read DMX universe
byte value known as
0x45
read DMX universe (hex)
2-3
2
universe value
universe value as a WORD
Content
"read DMX universe"
MSB (hex)
LSB (hex)
About datafield 4 (universe value)
current implementation takes only LSB value into account
R5905446 COMMAND CATALOG 08/06/2015
191
3. Commands
3.172 read gateway configuration, read
About this command
This command reads the gateway configuration.
Request
Pos
Size
Name
0
1
network
1
1
read gateway
configuration
Description
Content
value known as "network"
0x11
network (hex)
read gateway configuration
0x0b
read gateway configuration
(hex)
Response
192
Pos
Size
Name
Description
0
1
network
value known as "network"
0x11
network (hex)
1
1
read gateway
configuration
read gateway configuration
0x0b
read gateway configuration
(hex)
2
1
config
gateway configuration
0x00
wired (hex)
0x01
wireless (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.173 read global software version, read
About this command
This command reads the global software version.
Request
Pos
Size
0
1
Name
read version
Description
byte value known as "read version"
Content
0x60
read version (hex)
0x60
read version (hex)
Response
Pos
Size
0
1
NA
NA
Name
Description
read version
byte value known as "read version"
version
global version as Pascal language string
R5905446 COMMAND CATALOG 08/06/2015
Content
version (string)
193
3. Commands
3.174 read image load method, read
About this command
This command reads the image load method.
Request
Pos
Size
Name
Description
Content
0
1
file
1
1
read image load method
Pos
Size
Name
0
1
file
byte value known as "file"
0xbd
file (hex)
1
1
read image load method
read image load method
0x05
read image load method
(hex)
2
1
load method value
load method value
0x00
manual (hex)
0x01
auto (hex)
0x02
custom only (hex)
byte value known as "file"
0xbd
file (hex)
read image load method
0x05
read image load method
(hex)
Response
194
Description
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.175 read infrared ports, read
About this command
This command reads the infrared ports.
Request
Pos
Size
0
1
Name
read ir ports
Description
byte value known as "read ir ports"
Content
0x6f
read ir ports (hex)
Response
Pos
Size
0
1
read ir ports
Name
byte value known as "read ir ports"
0x6f
read ir ports (hex)
1
1
ir ports status
ir ports status as byte value
bit 7
reserved (bit)
bit 6
reserved (bit)
bit 5
reserved (bit)
bit 4
reserved (bit)
bit 3
side receiver (bit)
bit 2
reserved (bit)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
bit 1
rear receiver (bit)
bit 0
NA (bit)
195
3. Commands
3.176 read lamp CLO status, read
About this command
This command reads the lamp CLO (Contstant Light Output) status.
Request
Pos
Size
Name
0
1
lamp
1
1
read lamp clo status
Description
Content
value known as "lamp"
0x76
lamp (hex)
byte value known as
0x96
read lamp clo status (hex)
"read lamp clo status"
Response
Pos
Size
0
1
lamp
Name
value known as "lamp"
Description
0x76
lamp (hex)
1
1
read lamp clo status
byte value known as
0x96
read lamp clo status (hex)
2
1
status
status
0x00
off (hex)
0x01
on (hex)
Content
"read lamp clo status"
196
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.177 read lamp CLO target lumens, read
About this command
This command reads the lamp CLO (Constant Light Output) target lumens.
Request
Pos
Size
Name
0
1
lamp
1
1
read lamp clo value
Description
Content
value known as "lamp"
0x76
lamp (hex)
read lamp clo value
0x9e
read lamp clo value (hex)
Response
Pos
Size
Name
Description
0
1
lamp
value known as "lamp"
0x76
lamp (hex)
1
1
read lamp clo value
read lamp clo value
0x9e
read lamp clo value (hex)
2-5
4
lumens
lumens as DWORD
Content
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
197
3. Commands
3.178 read lamp runtime, read
About this command
This command reads the lamp runtime.
Request
Pos
Size
Name
0
1
lamp
1
1
read lamp runtime
Description
Content
value known as "lamp"
0x76
lamp (hex)
read lamp runtime
0x90
read lamp runtime (hex)
Response
Pos
Size
Name
Description
0
1
lamp
value known as "lamp"
0x76
lamp (hex)
1
1
read lamp runtime
read lamp runtime
0x90
read lamp runtime (hex)
2-5
4
lamp runtime
runtime in seconds as DWORD
Content
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
198
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.179 read language, read
About this command
This command reads the language selection.
Request
Pos
Size
Name
0
1
projector info
1
1
read language
Description
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as "read language"
0x04
read language (hex)
Response
Pos
Size
Name
0
1
projector info
byte value known as "projector info"
0xf5
projector info (hex)
1
1
read language
byte value known as "read language"
0x04
read language (hex)
NA
NA
language
language two-letter code
"en"
English (string)
as C-string
"fr"
French (string)
"de"
Deutch (string)
"es"
Spanish (string)
"pt"
Portuguese (string)
"nl"
Dutch (string)
"zh"
Chinese (string)
"ja"
Japanese (string)
"ko"
Korean (string)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
199
3. Commands
3.180 read menu position, read
About this command
This command reads the menu position.
Request
Pos
Size
Name
0
1
projector info
1
1
read menu position
Description
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as "read menu
position"
0x03
read menu position (hex)
Response
200
Pos
Size
Name
Description
Content
0
1
projector info
byte value known as "projector info"
0xf5
projector info (hex)
1
1
read menu position
byte value known as "read menu
position"
0x03
read menu position (hex)
2
1
position
position value
0x11
Top Left (hex)
0x12
Top Mid (hex)
0x13
Top Right (hex)
0x21
Mid Left (hex)
0x22
Mid Mid (hex)
0x23
Mid Right (hex)
0x31
Bottom Left (hex)
0x32
Bottom Mid (hex)
0x33
Bottom Right (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.181 read network configuration, read
About this command
This command reads the network configuration.
Request
Pos
Size
Name
0
1
network
1
1
read network
configuration
Description
Content
value known as "network"
0x11
network (hex)
read network configuration
0x01
read network configuration
(hex)
Response
Pos
Size
0
1
network
value known as "network"
0x11
network (hex)
1
1
read network
configuration
read network configuration
0x01
read network configuration
(hex)
2
1
mode
address assignment mode
0x00
manual (hex)
0x01
DHCP (hex)
3-6
4
Name
IP address
Description
Content
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
7-10
4
subnet mask
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
11-14
4
default gateway
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
15-20
6
MAC address
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
fifth octet (hex)
sixth octet (hex)
R5905446 COMMAND CATALOG 08/06/2015
201
3. Commands
3.182 read panel size, read
About this command
This command reads the DMD panel size.
Request
Pos
Size
Name
Description
0
1
0xf0
Content
1
1
0x01
Response
Pos
Size
Name
0
1
0xf0
1
1
0x01
2-3
2
X-value
Description
X-value as WORD
Content
MSB (hex)
LSB (hex)
4-5
2
Y-value
Y-value as WORD
MSB (hex)
LSB (hex)
202
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.183 read projector runtime, read
About this command
This command reads the projector runtime in seconds.
Request
Pos
Size
0
1
Name
read projector rt
Description
byte value known as
Content
0x62
read projector rt (hex)
"read projector runtime"
Response
Pos
Size
0
1
Name
read projector rt
Description
byte value known as
Content
0x62
read projector rt (hex)
"read projector runtime"
1-4
4
runtime in seconds as DWORD
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
203
3. Commands
3.184 read projector serial number, read
About this command
This command reads the projector serial number.
Request
Pos
Size
0
1
Name
read projector sn
Description
Content
byte value known as "read projector sn"
0x61
read projector sn (hex)
0x61
read projector sn (hex)
Response
204
Pos
Size
0
1
NA
NA
Name
Description
Content
read projector sn
byte value known as "read projector sn"
serial number
serial number as a Pascal language
string
serial number (string)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.185 read projector status, read
About this command
This command reads the projector status.
Request
Pos
Size
0
1
Name
read projector status
Description
byte value known as
Content
0x67
read projector status (hex)
optional:
bit 7
reserved (bit)
status mask in order to get only the info
of interest.
bit 6
lamp on (bit)
bit 5
reserved (bit)
bit 4
reserved (bit)
bit 3
reserved (bit)
bit 2
reserved (bit)
bit 1
text on (bit)
bit 0
projector on (bit)
"read projector status"
1
1
projector status mask
Response
Pos
Size
0
1
Name
read projector status
Description
byte value known as
Content
0x67
read projector status (hex)
bit 7
reserved (bit)
bit 6
lamp on (bit)
bit 5
reserved (bit)
bit 4
reserved (bit)
bit 3
reserved (bit)
bit 2
reserved (bit)
bit 1
text on (bit)
bit 0
projector on (bit)
"read projector status"
1
1
projector status
R5905446 COMMAND CATALOG 08/06/2015
The return data consists of one data
byte containing the projector status.
205
3. Commands
3.186 read wifi configuration, read
About this command
This command reads the wifi configuration.
Request
Pos
Size
Name
0
1
network
1
1
read wifi configuration
Description
Content
value known as "network"
0x11
network (hex)
read wifi configuration
0x06
read wifi configuration (hex)
Response
Pos
Size
0
1
network
value known as "network"
0x11
network (hex)
1
1
read wifi configuration
read wifi configuration
0x06
read wifi configuration (hex)
2
1
mode
address assignment mode
3-6
4
Name
IP address
Description
Content
0x00
manual (hex)
0x01
DHCP (hex)
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
7-10
4
subnet mask
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
11-14
4
default gateway
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
15-20
6
MAC address
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
fifth octet (hex)
sixth octet (hex)
206
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.187 read wifi key Mgmt, read
About this command
This command reads the wifi key Mgmt.
Request
Pos
Size
Name
0
1
network
1
1
read wifi key Mgmt
Description
Content
value known as "network"
0x11
network (hex)
read wifi key Mgmt
0x08
read wifi key Mgmt (hex)
Response
Pos
Size
Name
Description
0
1
network
value known as "network"
0x11
network (hex)
1
1
read wifi key Mgmt
read wifi key Mgmt
0x08
read wifi key Mgmt (hex)
2
1
security mode
security mode
0x00
no encryption (hex)
WPA/WPA2 (auto detected)
0x01
WPA/WPA2 (hex)
Content
PSK (Pre Shared Key)
TKIP/EAS (auto detected)
NA
NA
PSK
PSK as C-string
PSK (string)
About datafield 5 (PSK)
Only applicable if security mode is activated.
R5905446 COMMAND CATALOG 08/06/2015
207
3. Commands
3.188 read wifi scan, read
About this command
This command reads the wifi scan result.
Request
Pos
Size
0
1
network
Name
value known as "network"
Description
0x11
network (hex)
Content
1
1
read wifi scan
read wifi scan
0x09
read wifi scan (hex)
Response
Pos
Size
Name
Description
0
1
network
value known as "network"
0x11
network (hex)
1
1
read wifi scan
read wifi scan
0x09
read wifi scan (hex)
NA
NA
scan result
list of Access Points
Content
scan result (xml)
About datafield 4 (scan result)
<?xml version="1.0"?>
<scan>
<status>
<bssid>00:11:e0:03:00:01</bssid>
<ssid>DPSYS</ssid>
<id>0</id>
<pairwise_cipher>CCMP</pairwise_cipher>
<group_cipher>TKIP</group_cipher>
<key_mgmt>WPA2-PSK</key_mgmt>
<wpa_state>COMPLETED</wpa_state>
<ip_address>192.168.0.196</ip_address>
</status>
<accesspoints>
<accesspoint bssid="a4:18:75:78:ab:5e">
<freq>5280</freq>
<beacon_int>0</beacon_int>
<capabilities>0x0001</capabilities>
<qual>42</qual>
<noise>178</noise>
<level>183</level>
<tsf>0000000000000000</tsf>
<ie>000b426172636f204775657374010158</ie>
<flags></flags>
<ssid>Barco Guest</ssid>
</accesspoint>
</accesspoints>
</scan>
208
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.189 read wifi SSID, read
About this command
This command reads the wifi SSID of the AP (Access Point) to connect to.
The projector itself is not an AP.
Request
Pos
Size
Name
Description
0
1
network
value known as "network"
0x11
network (hex)
1
1
read wifi SSID
read wifi SSID
0x07
read SSID (hex)
Content
Response
Pos
Size
Name
0
1
network
value known as "network"
0x11
1
1
read wifi SSID
read wifi SSID
0x07
NA
NA
SSID
SSID as a C-string
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
network (hex)
read SSID (hex)
SSID (string)
209
3. Commands
3.190 read wifi status, read
About this command
This command reads the wifi status.
Request
Pos
Size
0
1
network
Name
value known as "network"
Description
0x11
network (hex)
Content
1
1
read wifi status
read wifi status
0x0a
read wifi status (hex)
Response
Pos
Size
Name
Description
0
1
network
value known as "network"
1
1
read wifi status
2
1
status
Content
0x11
network (hex)
read wifi status
0x0a
read wifi status (hex)
status
0x00
off (hex)
On = infrastructure mode
0x01
on (hex)
About datafield 4 (status)
"Infrastructure" mode, meaning no ad hoc/point to point connection supported
210
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.191 RS interface selection , read
About this command
This command reads the RS interface selection.
Request
Pos
Size
0
1
Name
RS interface selection
Description
byte value known as
Content
0x74
RS interface selection (hex)
"RS interface selection"
Response
Pos
Size
Name
0
1
rs interface selection
1
1
selection
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "rs interface
selection"
0x74
rs interface selection (hex)
RS interface selection
0x00
RS485 (hex)
0x01
RS232 (hex)
211
3. Commands
3.192 RS interface selection , write
About this command
This command writes the RS interface selection.
Request
Pos
Size
0
1
RS interface selection
Name
byte value known as
Description
1
1
selection
RS interface selection
Content
0x74
RS interface selection (hex)
0x00
RS485 (hex)
0x01
RS232 (hex)
"RS interface selection"
212
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.193 saturation possible, read
About this command
This command checks if saturation adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj saturation
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj saturation"
0x03
saturation (hex)
Response
Pos
Size
Name
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj saturation
value known as "adj saturation"
0x03
saturation (hex)
2
1
possible
adjustment is possible or not
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
0x00
not possible (hex)
0x01
possible (hex)
213
3. Commands
3.194 save current adjustments to a file, write
About this command
This command saves current adjustments to a file.
Valid from v1.6.
Request
214
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
save current distortion
byte value known as "save current
distortion"
0x81
save current distortion (hex)
NA
NA
file name
active warp file name as C-string.
.txt extension will automaticaly be
appended.
file name (string)
NA
1
number of grid columns
optional parameter to specify number of
grid columns.
grid columns. Valid values
are 2, 3, 5, 9, 17, 33 (hex)
NA
1
number of grid rows
optional parameter to specify number of
grid rows.
grid rows. Valid values are
2, 3, 5, 9, 17, 33 (hex)
Content
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.195 save custom settings, write
About this command
This command saves the custom settings.
Request
Pos
Size
0
1
function
1-4
4
part one
5-8
4
Name
part two
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "function"
0x82
function (hex)
DWORD value known as
0x00
BYTE 0 (hex)
"save custom settings part one"
0x00
BYTE 1 (hex)
0x00
BYTE 2 (hex)
0x4a
BYTE 3 (hex)
DWORD value known as
0x00
BYTE 0 (hex)
"save custom settings part two"
0x03
BYTE 1 (hex)
0x00
BYTE 2 (hex)
0x03
BYTE 3 (hex)
215
3. Commands
3.196 save image settings, write
About this command
This command saves the image settings to the corresponding file.
Request
Pos
Size
Name
0
1
file
1
1
save image settings
Description
Content
byte value known as "file"
0xbd
file (hex)
byte value known as
0x86
save image settings (hex)
"save image settings to file"
216
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.197 select main window as prefix, write
About this command
This command selects the main window as prefix for a window adjustment command.
prefix applicable for next commands:
- get/set output window commands
- select input slot.
Request
Pos
Size
Name
0
1
window
1
1
select window
2
1
main window
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "window"
0x8f
window (hex)
byte value known as "select window"
0x88
select window (hex)
byte value known as "main window"
0x00
main window (hex)
217
3. Commands
3.198 select PIP window as prefix, write
About this command
This command selects the PIP window as prefix for a window adjustment command.
prefix applicable for next commands:
- get/set output window commands
- select input slot.
Request
218
Pos
Size
Name
0
1
window
1
1
select window
2
1
PIP window
Description
Content
byte value known as "window"
0x8f
window (hex)
byte value known as "select window"
0x88
select window (hex)
byte value known as "PIP window"
0x01
PIP window (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.199 select source 1 as prefix, write
About this command
This command selects the source 1 as prefix for a source adjustment command.
Request
Pos
Size
Name
0
1
set source
1
1
input 1
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "set source"
0x31
set source (hex)
byte value known as "input 1"
0x01
input 1 (hex)
219
3. Commands
3.200 select source 2 as prefix, write
About this command
This command selects the source 2 as prefix for a source adjustment command.
Request
Pos
220
Size
Name
0
1
set source
1
1
input 2
Description
Content
byte value known as "set source"
0x31
set source (hex)
byte value known as "input 2"
0x02
input 2 (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.201 select source 3 as prefix, write
About this command
This command selects the source 3 as prefix for a source adjustment command.
Request
Pos
Size
Name
0
1
set source
1
1
input 3
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "set source"
0x31
set source (hex)
byte value known as "input 3"
0x03
input 3 (hex)
221
3. Commands
3.202 select source 4 as prefix, write
About this command
This command selects the source 4 as prefix for a source adjustment command.
Request
Pos
222
Size
Name
0
1
set source
1
1
input 4
Description
Content
byte value known as "set source"
0x31
set source (hex)
byte value known as "input 4"
0x04
input 4 (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.203 select window, write
About this command
This command selects the window for subsequent adjustments.
Request
Pos
Size
0
1
window
Name
byte value known as "window"
0x8f
window (hex)
1
1
select window
byte value known as "select window"
0x88
select window (hex)
2
1
selection
window selection
0x00
Main (hex)
0x01
PIP (hex)
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
223
3. Commands
3.204 set aspect ratio file, write
About this command
This command sets the aspect ratio file value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj aspect ratio
2
1
aspect ratio file
NA
NA
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc0
aspect ratio file (hex)
"adj aspect ratio"
byte value known as
"aspect ratio file"
aspect ratio string
aspect ratio as C-language string
aspect ratio string (string)
About datafield 3 (aspect ratio string)
"4:3" or "16:9" or "5:4" or "2.35" or "1.88" or "1.85" or "1.78" or "16:10" or "1.67" or "Custom"
224
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.205 set aspect ratio height, write
About this command
This command sets the aspect ratio height value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj aspect ratio
2
1
aspect ratio height
byte value known as
3-6
4
aspect ratio height
aspect ratio height as DWORD
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc2
aspect ratio height (hex)
"adj aspect ratio"
"aspect ratio height"
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
225
3. Commands
3.206 set aspect ratio width, write
About this command
This command sets the aspect ratio width value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj aspect ratio
2
1
aspect ratio width
byte value known as
3-6
4
aspect ratio width
aspect ratio width as DWORD
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x0b
adj aspect ratio (hex)
0xc1
aspect ratio width (hex)
"adj aspect ratio"
"aspect ratio width"
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
226
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.207 set blanking bottom, write
About this command
This command sets the blanking bottom value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj blanking bottom
2-3
2
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x4d
adj blanking bottom (hex)
"adj blanking bottom"
R5905446 COMMAND CATALOG 08/06/2015
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
227
3. Commands
3.208 set blanking left, write
About this command
This command sets the blanking left value.
Request
228
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj blanking left
2-3
2
value
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj blanking left"
0x4e
adj blanking left (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.209 set blanking right, write
About this command
This command sets the blanking right value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj blanking right
2-3
2
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x4f
adj blanking right (hex)
"adj blanking right"
R5905446 COMMAND CATALOG 08/06/2015
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
229
3. Commands
3.210 set blanking top , write
About this command
This command sets the blanking top value.
Request
230
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj blanking top
2-3
2
value
blanking value expressed as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj blanking top"
0x4c
adj blanking top (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.211 set brightness, write
About this command
This command sets the brightness value of the active source.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj brightness
2
1
value
brightness value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj brightness"
0x02
adj brightness (hex)
brightness value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
231
3. Commands
3.212 set clamp delay , write
About this command
This command sets the clamp delay value of the active source.
Request
Pos
Size
Name
0
1
set adj
1
1
adj clamp delay
2
1
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x67
adj clamp delay (hex)
"adj clamp delay"
clamp delay value
clamp delay value (hex)
range 0->255
232
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.213 set clamp width, write
About this command
This command sets the clamp width value of the active source.
Request
Pos
Size
Name
0
1
set adj
1
1
adj clamp width
2
1
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x68
adj clamp width (hex)
"adj clamp width"
clamp width value
clamp width value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
233
3. Commands
3.214 set color balance blue green ratio, write
About this command
This command sets the color balance blue green ratio of the active source.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj color balance blue
green
2
1
blue green ratio
color balance blue green ratio multiplied
by 100
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x44
adj color balance BG (hex)
"adj color balance blue green"
blue green ratio (hex)
range 0 -> 200
234
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.215 set color balance red green ratio, write
About this command
This command sets the color balance red green ratio of the active source.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj color balance red
green
2
1
red green ratio
color balance red green ratio multiplied
by 100
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x43
adj color balance RG (hex)
"adj color balance red green"
red green ratio (hex)
range 0 -> 200
R5905446 COMMAND CATALOG 08/06/2015
235
3. Commands
3.216 set color temperature, write
About this command
This command sets the color temperature of the active source.
Request
Pos
Size
Name
0
1
set adj
1
1
adj color temperature
NA
NA
color temperature
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
0x45
wanted color temperature expressed as
byte or C-String
0x00
custom (hex)
0x01
projector-white (hex)
0x32
3200 K (hex)
0x54
5400 K (hex)
0x65
6500 K (hex)
0x93
9300 K (hex)
color temperature (string)
About datafield 2 (color temperature)
possible color temperature strings are:
"custom"
"projector-white"
"3200"
"5400"
"6500"
"9300"
236
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.217 set contrast, write
About this command
This command sets the contrast value of the active source.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj contrast
byte value known as "adj contrast"
0x01
adj contrast (hex)
2
1
contrast value
range 0->100
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
contrast value (hex)
237
3. Commands
3.218 set dimming, write
About this command
This command sets the dimming value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj dimming
2
1
value
dimming value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj dimming"
0x0d
adj dimming (hex)
dimming value (hex)
range 255 -> 0
the higher the value the brighter the light
output
238
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.219 set gamma, write
About this command
This command sets the gamma value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj gamma
2
1
value
gamma value range 0->7
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj gamma"
0x70
adj gamma (hex)
gamma value (hex)
239
3. Commands
3.220 set input black balance, write
About this command
This command sets the input black balance value of the active source.
This is applicable for the specified color.
Request
Pos
Size
Name
Description
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj input black balance
byte value known as
0x6e
adj inp black bal (hex)
2
1
color
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
Content
"adj input black balance"
3
1
balance
color specification
balance value as byte
balance (hex)
range -127 -> 127
240
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.221 set input white balance, write
About this command
This command sets the input white balance value of the active source.
This is applicable for the specified color.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj input white balance
byte value known as "adj input white
balance"
0x6f
adj inp white bal (hex)
2
1
color
color specification
0x00
red (hex)
0x01
green (hex)
0x02
blue (hex)
3
1
Name
balance
Description
balance value as byte
Content
balance (hex)
range -127 -> 127
R5905446 COMMAND CATALOG 08/06/2015
241
3. Commands
3.222 set intensity, write
About this command
This command sets the intensity value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj intensity
2
1
value
intensity value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj intensity"
0xa4
adj intensity (hex)
intensity value (hex)
range 0->255
242
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.223 set lamp status, write
About this command
This command sets the status of the lamp, on or off.
Request
Pos
Size
Name
0
1
lamp
1
1
write lamp status
2
1
lamp status value
Description
Content
byte value known as "lamp"
0x76
lamp (hex)
byte value known as
0x1a
write lamp status (hex)
0x00
off (hex)
0x01
on (hex)
"write lamp status"
R5905446 COMMAND CATALOG 08/06/2015
lamp status value
243
3. Commands
3.224 set layout , write
About this command
This command sets the layout.
Request
244
Pos
Size
Name
Description
0
1
set adj
1
1
adj layout
NA
NA
layout file name
layout file name as C-string
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj layout"
0x90
adj layout (hex)
layout file name (string)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.225 set lcd backlight level, write
About this command
This command sets the lcd backlight level.
Request
Pos
Size
Name
Description
Content
0
1
set adj
byte value known as "set adj"
1
1
lcd blacklight level
byte value known as "lcd backlight level" 0xa5
lcd backlight level (hex)
2
1
level
backlight level
level (hex)
0x20
set adj (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
245
3. Commands
3.226 set lcd time out, write
About this command
This command sets the lcd time out value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj lcd time out
byte value known as "adj lcd time out"
0xa3
adj lcd time out (hex)
2
1
value
lcd time out value in seconds
lcd time out value (hex)
range 0->255
246
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.227 set lens focus, write
About this command
This command sets the lens focus.
Request
Pos
Size
0
1
lens
Name
byte value known as "lens"
Description
0xf4
lens (hex)
Content
1
1
write focus
byte value known as
0x83
write focus (hex)
2
1
direction
0x00
near (hex)
0x01
far (hex)
"write focus"
R5905446 COMMAND CATALOG 08/06/2015
direction
247
3. Commands
3.228 set lens shift, write
About this command
This command sets the lens shift.
Request
Pos
Size
0
1
lens
Name
byte value known as "lens"
Description
0xf4
lens (hex)
Content
1
1
write shift
byte value known as
0x81
write shift (hex)
2
1
direction
0x00
up (hex)
0x01
down (hex)
"write shift"
248
direction
0x02
left (hex)
0x03
right (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.229 set lens zoom, write
About this command
This command sets the lens zoom.
Request
Pos
Size
0
1
lens
Name
byte value known as "lens"
Description
0xf4
lens (hex)
Content
1
1
write zoom
byte value known as
0x82
write zoom (hex)
2
1
direction
0x00
in (hex)
0x01
out (hex)
"write zoom"
R5905446 COMMAND CATALOG 08/06/2015
direction
249
3. Commands
3.230 set lock, write
About this command
This command sets the lock mode.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj lock
byte value known as "adj lock"
0x99
adj lock (hex)
2
1
lock mode
lock mode
0x00
Free run at 60Hz (hex)
0x01
Lock to input 1 (hex)
0x02
Lock to input 2 (hex)
0x03
Lock to input 4 (hex)
0x04
Lock to input 4 (hex)
0xfd
manual lock (hex)
0xfe
lock to PIP (hex)
0xff
lock to Main window (hex)
3-6
250
4
Name
vertical refresh rate
Description
Content
In case of manual locking, the vertical
refresh rate can also be specified as
DWORD and represented in 1/10000
Hz. (e.g. 00 09 22 20 = 598560 =
59,856Hz)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.231 set no signal color logo, write
About this command
This command sets the blanking color value and logo status, used when no signal is connected.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
1
1
adj no signal color
byte value known as "adj no signal color" 0x7b
adj no signal color (hex)
2
1
value
no signal logo status
0x00
off (hex)
0x01
on (hex)
3
1
Name
red value
Description
red value
Content
0x20
set adj (hex)
red value (hex)
range 0->255
4
1
green value
green value
green value (hex)
range 0->255
5
1
blue value
blue value
blue value (hex)
range 0->255
R5905446 COMMAND CATALOG 08/06/2015
251
3. Commands
3.232 set no signal shutdown delay, write
About this command
This command sets the no signal shutdown delay, expressed in number of seconds.
Request
Pos
Size
Name
0
1
set adj
1
1
adj no signal shutdown
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj no signal
shutdown"
0x9a
adj no signal shutdown (hex)
delay
byte value known as
0x02
delay (hex)
delay value
delay in number of seconds as DWORD
"no signal shutdown delay"
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
252
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.233 set no signal shutdown status, write
About this command
This command sets the no signal shutdown status. "Enabled" or "Disabled".
Request
Pos
Size
Name
0
1
set adj
1
1
adj no signal shutdown
2
1
status
3
1
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x9a
adj no signal shutdown (hex)
0x01
status (hex)
0x00
Disabled (hex)
0x01
Enabled (hex)
"adj no signal shutdown"
byte value known as
"no signal shutdown status"
R5905446 COMMAND CATALOG 08/06/2015
status value
253
3. Commands
3.234 set output window in native resolution, write
About this command
This command sets the output window in native resolution of the input signal.
Request
Pos
Size
Name
0
1
set adj
1
1
output window
2
1
native resolution
3
1
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x8d
adj window (hex)
native resolution
0x16
native resolution (hex)
value as WORD in big endian (MSB
LSB)
0
Off (dec)
1
On (dec)
"adj output window"
254
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.235 set output window parameters, write
About this command
This command sets the output window parameters.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj output window
2
1
from index
from index specification as BYTE
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x8d
adj window (hex)
0
X-Offset (dec)
2
Y-Offset (dec)
4
Width (dec)
"adj output window"
6
3
1
window parameter
window parameter
Height (dec)
MSB (hex)
LSB (hex)
About datafield 3 (window parameter)
- all window parameters are expressed as WORD in big endian (MSB LSB)
- the minimum number of parameters is 1
- the maximum number of parameters depends on the specified from index
0 => max 4
2 => max 3
4 => max 2
6 => max 1
R5905446 COMMAND CATALOG 08/06/2015
255
3. Commands
3.236 set output window status, write
About this command
This command sets the output window status.
Request
Pos
Size
Name
0
1
set adj
1
1
output window
2
1
status
3
1
value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x8d
adj window (hex)
status
0x40
status (hex)
value as WORD in big endian (MSB
LSB)
0
Off (dec)
1
On (dec)
"adj output window"
256
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.237 set P7 TCGD blue X, write
About this command
This command sets the P7 TCGD blue X value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD blue X
byte value known as
0x07
P7 TCGD blue X (hex)
"P7 TCGD blue X"
4-5
2
value
P7 TCGD blue X value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
257
3. Commands
3.238 set P7 TCGD blue Y, write
About this command
This command sets the P7 TCGD blue Y value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD blue Y
byte value known as
0x08
P7 TCGD blue Y (hex)
"P7 TCGD blue Y"
4-5
2
value
P7 TCGD blue Y value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
258
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.239 set P7 TCGD cyan X, write
About this command
This command sets the P7 TCGD cyan X value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD cyan X
byte value known as
0x0d
P7 TCGD cyan X (hex)
2
value
P7 TCGD cyan X value as WORD
"P7 TCGD cyan X"
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
259
3. Commands
3.240 set P7 TCGD cyan Y, write
About this command
This command sets the P7 TCGD cyan Y value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD cyan Y
byte value known as
0x0e
P7 TCGD cyan Y (hex)
2
value
P7 TCGD cyan Y value as WORD
"P7 TCGD cyan Y"
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
260
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.241 set P7 TCGD green X, write
About this command
This command sets the P7 TCGD green X value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD green X
byte value known as
0x04
P7 TCGD green X (hex)
2
value
"P7 TCGD green X"
P7 TCGD green X value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
261
3. Commands
3.242 set P7 TCGD green Y, write
About this command
This command sets the P7 TCGD green Y value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD green Y
byte value known as
0x05
P7 TCGD green Y (hex)
2
value
"P7 TCGD green Y"
P7 TCGD green Y value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
262
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.243 set P7 TCGD magenta X, write
About this command
This command sets the P7 TCGD magenta X value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD magenta X
byte value known as
0x0a
P7 TCGD magenta X (hex)
2
value
"P7 TCGD magenta X"
P7 TCGD magenta X value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
263
3. Commands
3.244 set P7 TCGD magenta Y, write
About this command
This command sets the P7 TCGD magenta Y value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD magenta Y
byte value known as
0x0b
P7 TCGD magenta Y (hex)
2
value
"P7 TCGD magenta Y"
P7 TCGD magenta Y value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
264
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.245 set P7 TCGD red X , write
About this command
This command sets the P7 TCGD red X value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD red X
byte value known as "P7 TCGD red X"
0x01
P7 TCGD red X (hex)
4-5
2
value
P7 TCGD Red X value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
265
3. Commands
3.246 set P7 TCGD red Y, write
About this command
This command sets the P7 TCGD red Y value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD red Y
byte value known as "P7 TCGD red Y"
0x02
P7 TCGD red Y (hex)
4-5
2
value
P7 TCGD Red Y value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
266
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.247 set P7 TCGD selection, write
About this command
This command sets the P7 TCGD selection.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD all
byte value known as "P7 TCGD all"
0x00
all (hex)
NA
NA
file name
name of file with the wanted
file name (string)
P7 TCGD values.
name as C-string
R5905446 COMMAND CATALOG 08/06/2015
267
3. Commands
3.248 set P7 TCGD white X, write
About this command
This command sets the P7 TCGD white X value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD white X
byte value known as
0x13
P7 TCGD white X (hex)
"P7 TCGD white X"
4-5
2
value
P7 TCGD white X value as WORD
MSB (hex)
LSB (hex)
268
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.249 set P7 TCGD white Y, write
About this command
This command sets the P7 TCGD white Y value.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj P7
byte value known as "adj P7"
0x97
adj P7 (hex)
2
1
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
3
1
P7 TCGD white Y
byte value known as
0x14
P7 TCGD white Y (hex)
"P7 TCGD white Y"
4-5
2
value
P7 TCGD white Y value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
269
3. Commands
3.250 set P7 TCGD yellow X, write
About this command
This command sets the P7 TCGD yellow X value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD yellow X
byte value known as
0x10
P7 TCGD yellow X (hex)
2
value
"P7 TCGD yellow X"
P7 TCGD yellow X value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
270
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.251 set P7 TCGD yellow Y, write
About this command
This command sets the P7 TCGD yellow Y value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj P7
2
1
3
4-5
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj P7"
0x97
adj P7 (hex)
P7 TCGD
byte value known as "P7 TCGD"
0x00
P7 TCGD (hex)
1
P7 TCGD yellow Y
byte value known as
0x11
P7 TCGD yellow Y (hex)
2
value
"P7 TCGD yellow Y"
P7 TCGD yellow Y value as WORD
MSB (hex)
LSB (hex)
About datafield 4 (value)
Word value = floating point value * 10000
R5905446 COMMAND CATALOG 08/06/2015
271
3. Commands
3.252 set phase, write
About this command
This command sets the phase value of the active source.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj phase
2
1
value
phase value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj phase"
0x06
adj phase (hex)
phase value (hex)
range 0->63
272
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.253 set same lens settings status, write
About this command
This command sets the same lens settings status.
Request
Pos
Size
Name
0
1
set adj
1
1
adj same lens settings
2
1
status
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0xa2
adj same lens settings (hex)
0x00
layout specific (hex)
0x01
same for all layouts (hex)
"adj same lens settings"
R5905446 COMMAND CATALOG 08/06/2015
same lens settings status
273
3. Commands
3.254 set saturation, write
About this command
This command sets the saturation value of the active source.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj saturation
byte value known as "adj saturation"
0x03
adj saturation (hex)
2
1
value
saturation value
saturation value (hex)
range 0->255
274
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.255 set scan/orientation configuration, write
About this command
This command sets the scan/orientation configuration.
Request
Pos
Size
Name
0
1
set adj
1
1
adj scan
2
1
orientation
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj scan"
0x24
adj scan (hex)
orientation
0x40
Front-Table (hex)
0x80
Front-Ceiling (hex)
0x00
Rear-Table (hex)
0xc0
Rear-Ceiling (hex)
0x01
Auto-Front (hex)
0x02
Auto-Rear (hex)
275
3. Commands
3.256 set sharpness, write
About this command
This command sets the sharpness value of the active source.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj sharpness
2
1
value
sharpness value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj sharpness"
0x05
adj sharpness (hex)
sharpness value (hex)
range 0->31
276
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.257 set shutter position, write
About this command
This command opens or closes the shutter of the projector.
Request
Pos
Size
Name
0
1
set adj
1
1
adj shutter
2
1
shutter position
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj shutter"
0x42
adj shutter (hex)
shutter position
0x00
close (hex)
0x01
open (hex)
277
3. Commands
3.258 set soft edge black level, write
About this command
This command sets the soft edge black level value.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
1
1
adj soft edge black level
byte value known as "adj soft edge black 0x84
level"
adj soft edge black level
(hex)
2
1
color
color
red (hex)
3
1
Name
value
Description
soft edge black level value
Content
0x20
0x00
set adj (hex)
0x01
green (hex)
0x02
blue (hex)
black level value (hex)
range 0->255
278
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.259 set soft edge size black level bottom, write
About this command
This command sets the soft edge size black level bottom value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
bottom
"soft edge size black level bottom"
3-4
2
soft edge size black level soft edge size black level bottom
bottom
as WORD
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x05
soft edge size black level
bottom (hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
R5905446 COMMAND CATALOG 08/06/2015
279
3. Commands
3.260 set soft edge size black level left, write
About this command
This command sets the soft edge size black level left value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
left
"soft edge size black level left"
3-4
2
soft edge size black level soft edge size black level left
left
as WORD
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x06
soft edge size black level left
(hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
280
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.261 set soft edge size black level right, write
About this command
This command sets the soft edge size black level right value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
right
"soft edge size black level right"
3-4
2
soft edge size black level soft edge size black level right
right
as WORD
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x07
soft edge size black level
right (hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
R5905446 COMMAND CATALOG 08/06/2015
281
3. Commands
3.262 set soft edge size black level top, write
About this command
This command sets the soft edge size black level top value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size black level byte value known as
top
"soft edge size black level top"
3-4
2
soft edge size black level soft edge size black level top
top
as WORD
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x04
soft edge size black level top
(hex)
"adj soft edge size"
MSB (hex)
LSB (hex)
range depending on the native resolution
of the projector.
282
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.263 set soft edge size bottom, write
About this command
This command sets the soft edge size bottom value.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size bottom
byte value known as
3-4
2
soft edge size bottom
soft edge size bottom as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x01
soft edge size bottom (hex)
"adj soft edge size"
"soft edge size bottom"
R5905446 COMMAND CATALOG 08/06/2015
283
3. Commands
3.264 set soft edge size left, write
About this command
This command sets the soft edge size left value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size left
3-4
2
soft edge size left
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x02
soft edge size left (hex)
"adj soft edge size"
byte value known as
"soft edge size left"
284
soft edge size left as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.265 set soft edge size right , write
About this command
This command sets the soft edge size right value.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size right
byte value known as
3-4
2
soft edge size right
soft edge size right as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x03
soft edge size right (hex)
"adj soft edge size"
"soft edge size right"
R5905446 COMMAND CATALOG 08/06/2015
285
3. Commands
3.266 set soft edge size top , write
About this command
This command sets the soft edge size top value.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj soft edge size
2
1
soft edge size top
byte value known as
3-4
2
soft edge size top
soft edge size top as WORD
MSB (hex)
range depending on the native resolution
of the projector.
LSB (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as
0x83
adj soft edge size (hex)
0x00
soft edge size top (hex)
"adj soft edge size"
"soft edge size top"
286
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.267 set soft edge status, write
About this command
This command sets the soft edge status.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj soft edge status
2
1
status
soft edge status
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj soft edge
status"
0x82
adj soft edge status (hex)
soft edge status (hex)
bit 0 =
soft edge/scenergix enabled
bit 1 =
white level alignment lines enabled
bit 2 =
black level alignment lines enabled
bit 3 =
data doubling enabled
R5905446 COMMAND CATALOG 08/06/2015
287
3. Commands
3.268 set source , write
About this command
This command sets the source selection for the active window.
Request
288
Pos
Size
0
1
set source
Name
set source selection
Description
0x31
set source (hex)
Content
1
1
source selection
source selection
0x01
input 1 (hex)
0x02
input 2 (hex)
0x03
input 3 (hex)
0x04
input 4 (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.269 set source extended, write
About this command
This command sets the source extended data without changing the source selection.
For source selection, use the command: "set source, write".
Request
Pos
Size
Name
Description
0
1
set source
set source extended
0x33
set source extended (hex)
1
1
input module indication
input module indication
0x01
input 1 (hex)
0x02
input 2 (hex)
0x03
input 3 (hex)
0x04
input 4 (hex)
module mode
Content
2
1
mode
3
1
configuration part one
optional and only for SDI module
4
1
configuration part two
optional and only for SDI module
configuration part two (hex)
5
1
configuration part three
optional and only for SDI module
configuration part three (hex)
module mode (hex)
depends on module type
configuration part one (hex)
About datafield 2 (mode)
module modes
DVI/RGB analog
0x00 = dvi mode
0x01 = rgb analog hs-vs/cs
0x02 = yuv analog hs-vs/cs
0x03 = dual link DVI
0x04 = auto
SDI
0x00 = Input 1 (SD, HD or 3G)
0x01 = Input 2 (SD, HD or 3G)
0x02 = Input 1 priority over input 2 (SD, HD or 3G)
0x03 = Input 2 priority over input1 (SD, HD or 3G)
0x04 = DUAL HDSDI (uses both inputs)
0x05 = 2xHD (3D only - uses both inputs)
HDMI / DP
0x00 = HDMI
0x01 = Display Port
5-Cable:
0x00 = RGB HS/VS
0x01 = RGB CV: RGB with composite video on HS BNC
0x02 = RGB SOG: RGB with composite sync on G (G/Y/VIDEO BNC)
0x03 = YUV HS/VS
0x04 = YUV CV: YUV with composite video on HS BNC
0x05 = YUV SOY: RGB with composite sync on Y (G/Y/VIDEO BNC)
0x06 = CVBS: composite video on G/Y/VIDEO BNC
0x07 = S-VIDEO: separate video with Y on G/Y/VIDEO BNC and Cr on V/Cr BNC
Auto configuration is provided via the next modes:
0x08 = RGB AUTO: to do auto configuration between modes 0, 1 and 2
0x09 = YUV AUTO: to do auto configuration between modes 3, 4 and 5
R5905446 COMMAND CATALOG 08/06/2015
289
3. Commands
0x0a = CVBS/S-VIDEO AUTO: to do auto configuration between modes 6 and 7
About datafield 3 (configuration part one)
module configurations 1
SDI
0x00 = 4:2:2 YCbCr 10b
0x01 = 4:4:4 YCbCr 10b
0x02 = 4:4:4 RGB 10b
0x03 = 4:4:4 YCbCr 12b
0x04 = 4:4:4 RGB 12b
0x05 = 4:2:2 YCbCr 12b
DVI
0x00 = AUTO RGB (if mode is AUTO use RGB for analog sources)
0x01 = AUTO YUV (if mode is AUTO use YUV for analog sources)
About datafield 4 (configuration part two)
module configurations 2
SDI
0x00 = Dual: Normal
0x01 = Dual: Swap links
About datafield 5 (configuration part three)
module configurations 3
SDI
0x00 = 3G: Dual HD
0x01 = 3G: Direct mapping
0x02 = 3G-B: 2xHD (3D-only)
290
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.270 set test pattern by name, write
About this command
This command sets the specified test pattern.
Request
Pos
Size
Name
0
1
test pattern
1
1
test pattern by name
NA
NA
Description
Content
byte value known as "test pattern"
0x41
test pattern (hex)
byte value known as
0xc0
test pattern by name (hex)
"test pattern by name"
pattern name
pattern name as a C-language string
pattern name (string)
To exit the pattern, use an empty
C-language string.
About datafield 2 (pattern name)
valid test pattern names are:
"checkerboard"
"color bars"
"focus"
"full screen black"
"full screen blue"
"full screen green"
"full screen red"
"full screen white"
"hatch"
"outline"
"scenergix"
"convergence"
""
R5905446 COMMAND CATALOG 08/06/2015
291
3. Commands
3.271 set test pattern convergence, write
About this command
This command sets the convergence test pattern.
Request
Pos
Size
Name
0
1
test pattern
1
1
test pattern convergence
Description
byte value known as "test pattern"
test pattern (hex)
byte value known as
0x21
test pattern convergence
(hex)
"test pattern convergence"
292
Content
0x41
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.272 set test pattern convergence green blue, write
About this command
This command sets the convergence test pattern with green blue.
Request
Pos
Size
Name
Description
Content
0
1
test pattern
byte value known as "test pattern"
0x41
1
1
test pattern convergence
byte value known as
0x21
test pattern convergence
(hex)
2
1
convergence green blue
byte value known as
0x07
convergence green blue
(hex)
"test pattern convergence"
"convergence green blue"
R5905446 COMMAND CATALOG 08/06/2015
test pattern (hex)
293
3. Commands
3.273 set test pattern convergence red blue, write
About this command
This command sets the convergence test pattern with red blue.
Request
Pos
Size
Name
Description
Content
0
1
test pattern
byte value known as "test pattern"
0x41
1
1
test pattern convergence
byte value known as
0x21
test pattern convergence
(hex)
2
1
convergence red blue
byte value known as
0x08
convergence red blue (hex)
"test pattern convergence"
test pattern (hex)
"convergence red blue"
294
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.274 set test pattern convergence red green blue, write
About this command
This command sets the convergence test pattern with red green blue.
Request
Pos
Size
Name
0
1
test pattern
1
1
test pattern convergence
2
1
convergence red green
blue
Description
Content
byte value known as "test pattern"
0x41
test pattern (hex)
byte value known as
0x21
test pattern convergence
(hex)
0x20
convergence red green blue
(hex)
"test pattern convergence"
R5905446 COMMAND CATALOG 08/06/2015
byte value known as
"convergence red green blue"
295
3. Commands
3.275 set tint, write
About this command
This command sets the tint value of the active source.
Request
Pos
Size
0
1
set adj
Name
byte value known as "set adj"
Description
0x20
set adj (hex)
Content
1
1
adj tint
byte value known as "adj tint"
0x04
adj tint (hex)
2
1
value
tint value
tint value (hex)
range 0->128
296
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.276 set warp axis position, write
About this command
This command sets the warp axis position. This is the center used for the rotation command. Valid from v1.6.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj warp
2
1
warp axis position
byte value known as "warp axis position" 0x30
warp axis position (hex)
3-6
4
axis position X value
X value as float (IEE-754 4bytes)
BYTE 0 (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
7-10
4
axis position Y value
Y value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
297
3. Commands
3.277 set warp file, write
About this command
This command sets the wanted warp file.
Request
298
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
NA
NA
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp file
byte value known as "warp file"
0x80
warp file (hex)
file name
warp file name as C-string
file name (string)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.278 set warp grid size, write
About this command
This command sets the warp grid size value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3
1
Description
byte value known as "set adj"
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp grid size
byte value known as "warp grid size"
0x18
warp grid size (hex)
ver number of grid lines
vertical numbers of grid lines
only 2, 3, 5, 9, 17 and 33 are valid
numbers
4
1
Content
0x20
hor number of grid lines
horizontal number of grid lines
only 2, 3, 5, 9, 17 and 33 are valid
numbers
R5905446 COMMAND CATALOG 08/06/2015
ver number of grid lines
(hex)
hor number of grid lines
(hex)
299
3. Commands
3.279 set warp hierarchic keystone in X direction, write
About this command
This command sets the hierarchic warp keystone value in X direction.
Valid from v1.6.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic keystone
in X direction
byte value known as "warp hierarchic
keystone in X direction"
0x53
warp hierarchic keystone in
X direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
keystone in X direction
Description
Content
keystone in X direction value as float
(IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
300
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.280 set warp hierarchic keystone in Y direction, write
About this command
This command sets the hierarchic warp keystone value in Y direction.
Valid from v1.6.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic keystone
in Y direction
byte value known as "warp hierarchic
keystone in Y direction"
0x54
warp hierarchic keystone in
Y direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
keystone in Y direction
Description
keystone in Y direction value as float
(IEE-754 4bytes)
Content
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
301
3. Commands
3.281 set warp hierarchic linearity in X direction, write
About this command
This command sets the hierarchic warp linearity value in X direction.
Valid from v1.6.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic linearity
in X direction
byte value known as "warp hierarchic
linearity in X direction"
0x51
warp hierarchic linearity in X
direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
linearity in X direction
Description
Content
linearity in X direction value as float
(IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
302
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.282 set warp hierarchic linearity in Y direction, write
About this command
This command sets the hierarchic warp linearity value in Y direction.
Valid from v1.6.
Request
Pos
Size
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic linearity
in Y direction
byte value known as "warp hierarchic
linearity in Y direction"
0x52
warp hierarchic linearity in Y
direction (hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
4-7
4
Name
linearity in Y direction
Description
linearity in Y direction value as float
(IEE-754 4bytes)
Content
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
303
3. Commands
3.283 set warp hierarchic point shift, write
About this command
This command sets the hierarchic warp point shift value.
Valid from v1.6.
Request
Pos
Size
Name
Description
0
1
set adj
byte value known as "set adj"
0x20
set adj (hex)
1
1
adj warp
byte value known as "adj warp"
0xa1
adj warp (hex)
2
1
warp hierarchic point
shift horizontal
byte value known as "warp hierarchic
point shift"
0x50
warp hierarchic point shift
(hex)
3
1
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
Content
4
1
X position
X position of the pixel to shift
X position (0 - 32) (hex)
5
1
Y position
Y position of the pixel to shift
Y position (0 - 32) (hex)
6-9
4
X shift value
X shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
10-13
4
Y shift value
Y shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
304
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.284 set warp keystone horizontal. Deprecated from version 1.6, write
About this command
This command sets the warp keystone horizontal value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj warp
2
1
warp keystone horizontal byte value known as
3-6
4
keystone value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
0x02
warp keystone horizontal
(hex)
"warp keystone horizontal"
keystone value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
305
3. Commands
3.285 set warp keystone vertical. Deprecated from version 1.6, write
About this command
This command sets the warp keystone vertical value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp keystone vertical
byte value known as
0x01
warp keystone vertical (hex)
keystone value
keystone value as float (IEE-754 4bytes)
"warp keystone vertical"
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
306
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.286 set warp line shift horizontal. Deprecated from version 1.6, write
About this command
This command sets the warp line shift horizontal value.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj warp
2
1
warp line shift horizontal
3
1
line position
position of the line to shift
line position (hex)
4-7
4
line shift value
line shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x16
warp line shift horizontal
(hex)
"warp line shift horizontal"
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
307
3. Commands
3.287 set warp line shift vertical. Deprecated from version 1.6, write
About this command
This command sets the warp line shift vertical value.
Request
Pos
Size
Name
Description
Content
0
1
set adj
1
1
adj warp
2
1
warp line shift vertical
3
1
line position
position of the line to shift
line position (hex)
4-7
4
line shift value
line shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x15
warp line shift vertical (hex)
"warp line shift vertical"
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
308
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.288 set warp linearity horizontal. Deprecated from version 1.6, write
About this command
This command sets the warp linearity horizontal value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
warp linearity horizontal
3-6
4
linearity value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x0f
warp linearity horizontal
(hex)
"warp linearity horizontal"
linearity value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
309
3. Commands
3.289 set warp linearity vertical. Deprecated from version 1.6, write
About this command
This command sets the warp linearity vertical value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
warp linearity vertical
3-6
4
linearity value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x10
warp linearity vertical (hex)
"warp linearity vertical"
linearity value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
310
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.290 set warp pin barrel horizontal. Deprecated from version 1.6, write
About this command
This command sets the warp pin barrel horizontal value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj warp
2
1
warp pin barrel horizontal byte value known as
3-6
4
barrel value
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
0x0e
warp pin barrel horizontal
(hex)
"warp pin barrel horizontal"
barrel value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
311
3. Commands
3.291 set warp pin barrel vertical. Deprecated from version 1.6, write
About this command
This command sets the warp pin barrel vertical value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
warp pin barrel vertical
3-6
4
barrel value
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
byte value known as
0x0d
warp pin barrel vertical (hex)
"warp pin barrel vertical"
barrel value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
312
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.292 set warp point shift. Deprecated from version 1.6, write
About this command
This command sets the warp point shift value.
Request
Pos
Size
Name
Description
0
1
set adj
1
1
adj warp
2
1
warp point shift horizontal byte value known as "warp point shift"
3
1
X position
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
0x17
warp point shift (hex)
X position of the pixel to shift
X position (hex)
4
1
Y position
Y position of the pixel to shift
Y position (hex)
5-8
4
X shift value
X shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
9-12
4
Y shift value
Y shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
313
3. Commands
3.293 set warp rotation, write
About this command
This command sets the warp rotation value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp rotation
byte value known as "warp rotation"
0x03
warp rotation (hex)
angle value
angle value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
314
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.294 set warp scale horizontal, write
About this command
This command sets the warp scale horizontal value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3
1
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp scale horizontal
byte value known as
0x12
warp scale horizontal (hex)
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
"warp scale horizontal"
4-7
4
scale value
scale value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
315
3. Commands
3.295 set warp scale vertical , write
About this command
This command sets the warp scale vertical value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3
1
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp scale vertical
byte value known as
0x11
warp scale vertical (hex)
warp area
warp area.
0x00
all area (hex)
optional field added from version 1.6.
0x01
right area (hex)
If omitted in the request, it does not
appear in the response. The default
area is "all area" in this case.
0x02
bottom area (hex)
0x03
top area (hex)
0x04
left area (hex)
0x05
left top area (hex)
0x06
right top area (hex)
0x07
left bottom area (hex)
0x08
right bottom area (hex)
"warp scale vertical"
4-7
4
scale value
scale value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
316
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.296 set warp shift horizontal, write
About this command
This command sets the warp shift horizontal value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp shift horizontal
byte value known as
0x14
warp shift horizontal (hex)
line shift value
line shift value as float (IEE-754 4bytes)
"warp shift horizontal"
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
317
3. Commands
3.297 set warp shift vertical, write
About this command
This command sets the warp shift vertical value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp shift vertical
byte value known as "warp shift vertical"
0x13
warp shift vertical (hex)
shift value
shift value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
318
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.298 set warp status, write
About this command
This command sets the warp status value.
Request
Pos
Size
0
1
set adj
1
1
adj warp
2
1
3
1
4-5
2
Name
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp status
byte value known as "warp status"
0x00
warp status (hex)
status value
status value
0x00
off (hex)
optional warp enable
command fields
2 byte bit field is added when status =
0x01
0x01
on, manual mode (hex)
0x02
on, file mode (hex)
move
deprecated from version 1.6
points (bit)
shift
grid
line
deprecated from version 1.6
(bit)
lindeprecated from version 1.6
earity (bit)
pindeprecated from version 1.6
cush(bit)
ion
barrel
keystone
deprecated from version 1.6
(bit)
scale
shift
rotate
Hierarchic
points
unused
unused
unused
unused
unused
unused
four
deprecated from version 1.6
corner (bit)
R5905446 COMMAND CATALOG 08/06/2015
319
3. Commands
3.299 set warp X1. Deprecated from version 1.6, write
About this command
This command sets the warp X1 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp X1
byte value known as "warp X1"
0x05
warp X1 (hex)
X1 value
X1 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
320
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.300 set warp X2. Deprecated from version 1.6, write
About this command
This command sets the warp X2 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp X2
byte value known as "warp X2"
0x07
warp X2 (hex)
X2 value
X2 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
321
3. Commands
3.301 set warp X3. Deprecated from version 1.6, write
About this command
This command sets the warp X3 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp X3
byte value known as "warp X3"
0x09
warp X3 (hex)
X3 value
X3 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
322
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.302 set warp X4. Deprecated from version 1.6, write
About this command
This command sets the warp X4 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp X4
byte value known as "warp X4"
0x0b
warp X4 (hex)
X4 value
X4 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
323
3. Commands
3.303 set warp Y1. Deprecated from version 1.6, write
About this command
This command sets the warp Y1 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp Y1
byte value known as "warp Y1"
0x06
warp Y1 (hex)
Y1 value
Y1 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
324
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.304 set warp Y2. Deprecated from version 1.6, write
About this command
This command sets the warp Y2 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp Y2
byte value known as "warp Y2"
0x08
warp Y2 (hex)
Y2 value
Y2 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
325
3. Commands
3.305 set warp Y3. Deprecated from version 1.6, write
About this command
This command sets the warp Y3 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp Y3
byte value known as "warp Y3"
0x0a
warp Y3 (hex)
Y3 value
Y3 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
326
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.306 set warp Y4. Deprecated from version 1.6, write
About this command
This command sets the warp Y4 value.
Request
Pos
Size
Name
0
1
set adj
1
1
adj warp
2
1
3-6
4
Description
Content
byte value known as "set adj"
0x20
set adj (hex)
byte value known as "adj warp"
0xa1
adj warp (hex)
warp Y4
byte value known as "warp Y4"
0x0c
warp Y4 (hex)
Y4 value
Y4 value as float (IEE-754 4bytes)
BYTE 0 (hex)
BYTE 1 (hex)
BYTE 2 (hex)
BYTE 3 (hex)
R5905446 COMMAND CATALOG 08/06/2015
327
3. Commands
3.307 sharpness possible, read
About this command
This command checks if sharpness adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj sharpness
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj sharpness"
0x05
sharpness (hex)
Response
328
Pos
Size
Name
Description
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj sharpness
value known as "adj sharpness"
0x05
sharpness (hex)
2
1
possible
adjustment is possible or not
Content
0x00
not possible (hex)
0x01
possible (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.308 text off, write
About this command
This command sets the text off.
Request
Pos
Size
0
1
Name
text off
R5905446 COMMAND CATALOG 08/06/2015
Description
byte value known as "text off"
Content
0x0e
text off (hex)
329
3. Commands
3.309 text on, write
About this command
This command sets the text on.
Request
330
Pos
Size
0
1
Name
text on
Description
byte value known as "text on"
Content
0x0d
text on (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.310 tint possible, read
About this command
This command checks if tint adjustment is possible.
Request
Pos
Size
Name
0
1
adj possible
1
1
adj tint
Description
Content
value known as "adj possible"
0x29
adj possible (hex)
value known as "adj tint"
0x04
tint (hex)
Response
Pos
Size
Name
0
1
adj possible
value known as "adj possible"
0x29
adj possible (hex)
1
1
adj tint
value known as "adj tint"
0x04
tint (hex)
2
1
possible
adjustment is possible or not
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
0x00
not possible (hex)
0x01
possible (hex)
331
3. Commands
3.311 unfreeze, write
About this command
This command unfreezes the active window.
Request
Pos
Size
0
1
min adj
Name
byte value known as "min adj"
Description
0x26
min adj (hex)
Content
1
1
adj freeze
byte value known as
0x23
adj freeze (hex)
"adj freeze"
332
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.312 warp file delete, write
About this command
This command deletes a warp file.
Request
Pos
Size
Name
0
1
0xbd
1
1
0xc6
NA
NA
filename
R5905446 COMMAND CATALOG 08/06/2015
Description
C-language string starting with
"$HDXWARP/"
Content
filename (string)
333
3. Commands
3.313 warp file rename, write
About this command
This command renames a warp file.
Request
334
Pos
Size
Name
Description
0
1
0xbd
Content
1
1
0xc4
NA
NA
old filename
C-language string starting with
"$HDXWARP/"
old filename (string)
NA
NA
new filename
C-language string starting with
"$HDXWARP/"
new filename (string)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.314 write auto picture alignment configuration, write
About this command
This command writes the auto picture alignment configuration.
Request
Pos
Size
Name
0
1
file
1
1
write auto picture
alignment
2
1
configuration
configuration
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "file"
0xbd
file (hex)
byte value known as
0x87
write auto picture alignment
(hex)
0x00
at file load (hex)
0x01
off (hex)
0x02
always (hex)
"write auto picture alignment"
335
3. Commands
3.315 write barscale position, write
About this command
This command writes the barscale position.
Request
Pos
Size
Name
Description
0
1
projector info
1
1
write barscale position
2
1
position
position value
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as
0x82
write barscale position (hex)
0x11
Top Left (hex)
0x12
Top Mid (hex)
0x13
Top Right (hex)
0x21
Mid Left (hex)
0x22
Mid Mid (hex)
0x23
Mid Right (hex)
0x31
Bottom Left (hex)
"write barscale position"
336
0x32
Bottom Mid (hex)
0x33
Bottom Right (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.316 write customer id, write
About this command
This command writes the customer id.
Request
Pos
Size
0
1
projector info
Name
byte value known as "projector info"
Description
0xf5
projector info (hex)
Content
1
1
write customer id
byte value known as "write customer id"
0x81
write customer id (hex)
NA
NA
customer ID
customer ID as C-string
customer ID (string)
About datafield 2 (customer ID)
maximum 15 characters as net data (terminating "\0" not included)
R5905446 COMMAND CATALOG 08/06/2015
337
3. Commands
3.317 write DMX address, write
About this command
This command writes the DMX address.
Request
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
Content
1
1
write DMX address
byte value known as
0x41
write DMX address (hex)
2-3
2
DMX address
DMX address as WORD
MSB (hex)
range 1 -> 512
LSB (hex)
"write DMX address"
338
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.318 write DMX mode, write
About this command
This command writes the DMX mode.
Request
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
Content
1
1
write DMX mode
byte value known as
0x43
write DMX mode (hex)
2
1
mode
0x00
full (hex)
0x01
basic (hex)
0x02
extended (hex)
"write DMX mode"
R5905446 COMMAND CATALOG 08/06/2015
DMX mode
339
3. Commands
3.319 write DMX universe, write
About this command
This command writes the DMX universe applicable to Art-Net.
Request
Pos
Size
0
1
DMX
Name
byte value known as "DMX"
Description
0x57
DMX (hex)
Content
1
1
write DMX universe
byte value known as
0x45
write DMX universe (hex)
2-3
2
universe value
universe value as a WORD
"write DMX universe"
MSB (hex)
LSB (hex)
About datafield 2 (universe value)
current implementation takes only LSB value into account
340
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.320 write gateway configuration, write
About this command
This command writes the gateway configuration.
Request
Pos
Size
Name
0
1
network
1
1
write gateway
configuration
2
1
config
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
value known as "network"
0x11
network (hex)
write gateway configuration
0x8b
write gateway configuration
(hex)
gateway configuration
0x00
wired (hex)
0x01
wireless (hex)
341
3. Commands
3.321 write infrared ports status, write
About this command
This command writes the infrared ports status.
Request
342
Pos
Size
Name
0
1
write ir ports
1
1
ir ports status
Description
Content
byte value known as "write ir ports"
0x6e
write ir ports (hex)
ir ports status as byte value
bit 7
reserved (bit)
bit 6
reserved (bit)
bit 5
reserved (bit)
bit 4
reserved (bit)
bit 3
side receiver (bit)
bit 2
reserved (bit)
bit 1
rear receiver (bit)
bit 0
NA (bit)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.322 write lamp CLO status, write
About this command
This command writes the lamp CLO (Contstant Light Output) status.
Request
Pos
Size
Name
Description
0
1
lamp
1
1
write lamp clo status
2
1
status
status
Content
value known as "lamp"
0x76
lamp (hex)
byte value known as
0x16
write lamp clo status (hex)
0x00
off (hex)
0x01
on (hex)
"write lamp clo status"
R5905446 COMMAND CATALOG 08/06/2015
343
3. Commands
3.323 write lamp CLO target lumens, write
About this command
This command writes the lamp CLO (Constant Light Output) target lumens.
Request
Pos
Size
Name
Description
0
1
lamp
1
1
write lamp clo value
2-5
4
lumens
lumens as DWORD
Content
value known as "lamp"
0x76
lamp (hex)
write lamp clo value
0x1e
write lamp clo value (hex)
MSB (hex)
BYTE 1 (hex)
BYTE 2 (hex)
LSB (hex)
344
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.324 write language, write
About this command
This command writes the language selection.
Request
Pos
Size
Name
0
1
projector info
1
1
write language
NA
NA
language
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as "write language"
0x84
write language (hex)
language two-letter code
"en"
English (string)
as C-string
"fr"
French (string)
"de"
Deutch (string)
"es"
Spanish (string)
"pt"
Portuguese (string)
"nl"
Dutch (string)
"zh"
Chinese (string)
"ja"
Japanese (string)
"ko"
Korean (string)
345
3. Commands
3.325 write menu position, write
About this command
This command writes the menu position.
Request
Pos
Size
Name
0
1
projector info
1
1
write menu position
Description
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as
0x83
write menu position (hex)
"write menu position"
Response
Pos
Size
0
1
Name
Description
projector info
1
1
write menu position
2
1
position
position value
Content
byte value known as "projector info"
0xf5
projector info (hex)
byte value known as
0x83
write menu position (hex)
0x11
Top Left (hex)
0x12
Top Mid (hex)
0x13
Top Right (hex)
0x21
Mid Left (hex)
0x22
Mid Mid (hex)
0x23
Mid Right (hex)
0x31
Bottom Left (hex)
"write menu position"
346
0x32
Bottom Mid (hex)
0x33
Bottom Right (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.326 write network configuration, write
About this command
This command writes the network configuration.
Request
Pos
Size
Name
0
1
network
1
1
write network
configuration
2
1
mode
3-6
4
IP address
Description
Content
value known as "network"
0x11
network (hex)
write network configuration
0x81
write network configuration
(hex)
address assignment mode
0x00
manual (hex)
0x01
DHCP (hex)
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
7-10
4
subnet mask
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
11-14
4
default gateway
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
15-20
6
MAC address
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
fifth octet (hex)
sixth octet (hex)
R5905446 COMMAND CATALOG 08/06/2015
347
3. Commands
3.327 write projector off, write
About this command
This command sets the projector off. (off = stand by)
When the lamp is off, the projector is switched off.
When the lamp is on, the lamp is switched off and the projector is switched off.
Request
348
Pos
Size
0
1
Name
write projector off
Description
Content
byte value known as "write projector off"
0x66
write projector off (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.328 write projector on, write
About this command
This command sets the projector on. When the lamp is off, the projector is switched on (= wake up) The lamp remains off. Use the
"set lamp status" command to switch on the lamp. When the lamp is on there is no change.
Request
Pos
Size
0
1
Name
write projector on
Description
byte value known as
Content
0x65
write projector on (hex)
"write projector on"
R5905446 COMMAND CATALOG 08/06/2015
349
3. Commands
3.329 write wifi configuration, write
About this command
This command writes the wifi configuration.
Request
Pos
Size
0
1
network
1
1
write wifi configuration
2
1
mode
3-6
4
Name
IP address
Description
Content
value known as "network"
0x11
network (hex)
write wifi configuration
0x86
write wifi configuration (hex)
address assignment mode
0x00
manual (hex)
0x01
DHCP (hex)
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
7-10
4
subnet mask
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
11-14
4
default gateway
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
15-20
6
MAC address
first octet (hex)
second octet (hex)
third octet (hex)
fourth octet (hex)
fifth octet (hex)
sixth octet (hex)
350
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.330 write wifi key mgmt, write
About this command
This command writes the wifi key mgmt.
Request
Pos
Size
Name
0
1
network
1
1
write wifi key mgmt
2
1
security mode
Description
Content
value known as "network"
0x11
network (hex)
write wifi key mgmt
0x88
write wifi key mgmt (hex)
security mode
0x00
no encryption (hex)
WPA/WPA2 (auto detected)
0x01
WPA/WPA2 (hex)
PSK (Pre Shared Key)
TKIP/EAS (auto detected)
NA
NA
PSK
PSK as C-string
PSK (string)
About datafield 3 (PSK)
Only applicable if security mode is activated.
R5905446 COMMAND CATALOG 08/06/2015
351
3. Commands
3.331 write wifi scan, write
About this command
This command triggers a scan for Access Points.
Request
352
Pos
Size
0
1
network
Name
value known as "network"
Description
0x11
network (hex)
Content
1
1
write wifi scan
write wifi scan
0x89
write wifi scan (hex)
R5905446 COMMAND CATALOG 08/06/2015
3. Commands
3.332 write wifi SSID , write
About this command
This command writes the wifi SSID of the AP (Access Point) to connect to.
The projector itself is not an AP.
Request
Pos
Size
Name
0
1
network
value known as "network"
0x11
network (hex)
1
1
write wifi SSID
configuration
write wifi SSID configuration
0x87
write wifi SSID configuration
(hex)
NA
NA
SSID
SSID as a C-string
R5905446 COMMAND CATALOG 08/06/2015
Description
Content
SSID (string)
353
3. Commands
3.333 write wifi status, write
About this command
This command writes the wifi status.
Request
Pos
Size
0
1
network
Name
value known as "network"
Description
0x11
network (hex)
Content
1
1
write wifi status
write wifi status
0x8a
write wifi status (hex)
2
1
status
status
0x00
off (hex)
On = infrastructure mode
0x01
on (hex)
About datafield 2 (status)
"Infrastructure" mode, meaning no ad hoc/point to point connection supported
354
R5905446 COMMAND CATALOG 08/06/2015
Index
INDEX
Numerics/Symbols
3D dark time adjustment 19–20
read 19
write 20
3D Double/Tripple Flash limit 21–22
read 21
write 22
3D field dominance 23–24
read 23
write 24
3D L/R Output Reference Delay 25–26
read 25
write 26
3D mode 27–28
read 27
write 28
3D status 29–30
read 29
write 30
3D Sync Loop status 31–32
read 31
write 32
E
Ethernet
13
F
freeze
write
function
read
function
read
function
write
53
53
read electronic convergence 54
54
read input balance pattern status 55
55
write electronic convergence 56
56
G
A
About this document
decrement sharpness 50
write 50
decrement shutter 51
write 51
decrement tint 52
write 52
8
B
Barco Projection Protocol
brightness possible 33
read 33
9–10
C
clear test pattern 34
write 34
Command representation
contrast possible 35
read 35
16
D
decrement blanking bottom 36
write 36
decrement blanking left 37
write 37
decrement blanking right 38
write 38
decrement blanking top 39
write 39
decrement brightness 40
write 40
decrement color balance blue green ratio 41
write 41
decrement color balance red green ratio 42
write 42
decrement contrast 43
write 43
decrement dimming value 44
write 44
decrement gamma 45
write 45
decrement input black balance 46
write 46
decrement input white balance 47
write 47
decrement phase 48
write 48
decrement saturation 49
write 49
R5905446 COMMAND CATALOG 08/06/2015
get aspect ratio file 57
read 57
get aspect ratio height 58
read 58
get aspect ratio width 59
read 59
get baudrate 60
read 60
get blanking bottom 61
read 61
get blanking left 62
read 62
get blanking right 63
read 63
get blanking top 64
read 64
get brightness 65
read 65
get clamp delay 66
read 66
get clamp width 67
read 67
get color balance blue green ratio 68
read 68
get color balance red green ratio 69
read 69
get color temperature 70
read 70
get common address 71
read 71
get contrast 72
read 72
get dimming 73
read 73
get ext contrast 74
read 74
get ext gamma 75
read 75
get ext phase 76
read 76
get ext sharpness 77
read 77
get freeze status 78
read 78
get gamma 79
read 79
get gamma (text value) 80
read 80
355
Index
get input black balance 81
read 81
get input white balance 82
read 82
get intensity 83
read 83
get ir hold off configuration 84
read 84
get lamp status 85–86
read 85–86
get layout 87
read 87
get lcd backlight level 88
read 88
get lcd time out 89
read 89
get lock 90
read 90
get no signal color logo 91
read 91
get no signal shutdown delay 92
read 92
get no signal shutdown status 93
read 93
get output window native resolution status 94
read 94
get output window parameters 95
read 95
get output window status 96
read 96
get P7 TCGD blue X 97
read 97
get P7 TCGD blue Y 98
read 98
get P7 TCGD cyan X 99
read 99
get P7 TCGD cyan Y 100
read 100
get P7 TCGD green Y 101
read 101
get P7 TCGD magenta X 102
read 102
get P7 TCGD magenta Y 103
read 103
get P7 TCGD red X 104
read 104
get P7 TCGD red Y 105
read 105
get P7 TCGD selection 106
read 106
get P7 TCGD white X 107
read 107
get P7 TCGD white Y 108
read 108
get P7 TCGD yellow X 109
read 109
get P7 TCGD yellow Y 110
read 110
get phase 111
read 111
get projector address 112
read 112
get same lens settings status 113
read 113
get saturation 114
read 114
get scan/orientation configuration 115
read 115
get sharpness 116
read 116
get shutter status 117
read 117
get soft edge black level 118
read 118
get soft edge size black level bottom 119
read 119
356
get soft edge size black level left 120
read 120
get soft edge size black level right 121
read 121
get soft edge size black level top 122
read 122
get soft edge size bottom 123
read 123
get soft edge size left 124
read 124
get soft edge size right 125
read 125
get soft edge size top 126
read 126
get soft edge status 127
read 127
get source 128
read 128
get source extended 129
read 129
get text on 132
read 132
get tint 133
read 133
get warp axis position 134
read 134
get warp file 135
read 135
get warp grid size 136
read 136
get warp hierarchic keystone in X direction 137
read 137
get warp hierarchic keystone in Y direction 138
read 138
get warp hierarchic linearity in X direction 139
read 139
get warp hierarchic linearity in Y direction 140
read 140
get warp hierarchic point shift 141
read 141
get warp keystone horizontal. Deprecated from version 1.6 142
read 142
get warp keystone vertical. Deprecated from version 1.6 143
read 143
get warp line shift horizontal. Deprecated from version 1.6 144
read 144
get warp line shift vertical. Deprecated from version 1.6 145
read 145
get warp linearity horizontal. Deprecated from version 1.6 146
read 146
get warp linearity vertical. Deprecated from version 1.6 147
read 147
get warp pin barrel horizontal. Deprecated from version 1.6 148
read 148
get warp pin barrel vertical. Deprecated from version 1.6 149
read 149
get warp point shift. Deprecated from version 1.6 150
read 150
get warp rotation 151
read 151
get warp scale horizontal. 152
read 152
get warp scale vertical. 153
read 153
get warp shift horizontal 154
read 154
get warp shift vertical 155
read 155
get warp status 156
read 156
get warp X1. Deprecated from version 1.6 157
read 157
get warp X2. Deprecated from version 1.6 158
read 158
get warp X3. Deprecated from version 1.6 159
read 159
R5905446 COMMAND CATALOG 08/06/2015
Index
get warp X4. Deprecated from
read 160
get warp Y1. Deprecated from
read 161
get warp Y2. Deprecated from
read 162
get warp Y3. Deprecated from
read 163
get warp Y4. Deprecated from
read 164
get window selection 165
read 165
version 1.6
160
version 1.6
161
version 1.6
162
version 1.6
163
version 1.6
164
I
increment blanking bottom 166
write 166
increment blanking left 167
write 167
increment blanking right 168
write 168
increment blanking top 169
write 169
increment brightness 170
write 170
increment color balance blue green 171
write 171
increment color balance red green 172
write 172
increment contrast 173
write 173
increment dimming value 174
write 174
increment gamma 175
write 175
increment input black balance 176
write 176
increment input white balance 177
write 177
increment phase 178
write 178
increment saturation 179
write 179
increment sharpness 180
write 180
increment shutter 181
write 181
increment tint 182
write 182
input format horizontal total possible 183
read 183
Introduction 7
P
phase possible 184
read 184
Projection Protocol 9–10
Protocol 9–10
R
read 19, 21, 23, 25, 27, 29, 31, 33, 35, 54–55, 57–129, 132–165,
183–211, 213, 328, 331
3D dark time adjustment 19
3D Double/Tripple Flash limit 21
3D field dominance 23
3D L/R Output Reference Delay 25
3D mode 27
3D status 29
3D Sync Loop status 31
brightness possible 33
contrast possible 35
function read electronic convergence 54
function read input balance pattern status 55
R5905446 COMMAND CATALOG 08/06/2015
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
get
aspect ratio file 57
aspect ratio height 58
aspect ratio width 59
baudrate 60
blanking bottom 61
blanking left 62
blanking right 63
blanking top 64
brightness 65
clamp delay 66
clamp width 67
color balance blue green ratio 68
color balance red green ratio 69
color temperature 70
common address 71
contrast 72
dimming 73
ext contrast 74
ext gamma 75
ext phase 76
ext sharpness 77
freeze status 78
gamma 79
gamma (text value) 80
input black balance 81
input white balance 82
intensity 83
ir hold off configuration 84
lamp status 85–86
layout 87
lcd backlight level 88
lcd time out 89
lock 90
no signal color logo 91
no signal shutdown delay 92
no signal shutdown status 93
output window native resolution status 94
output window parameters 95
output window status 96
P7 TCGD blue X 97
P7 TCGD blue Y 98
P7 TCGD cyan X 99
P7 TCGD cyan Y 100
P7 TCGD green Y 101
P7 TCGD magenta X 102
P7 TCGD magenta Y 103
P7 TCGD red X 104
P7 TCGD red Y 105
P7 TCGD selection 106
P7 TCGD white X 107
P7 TCGD white Y 108
P7 TCGD yellow X 109
P7 TCGD yellow Y 110
phase 111
projector address 112
same lens settings status 113
saturation 114
scan/orientation configuration 115
sharpness 116
shutter status 117
soft edge black level 118
soft edge size black level bottom 119
soft edge size black level left 120
soft edge size black level right 121
soft edge size black level top 122
soft edge size bottom 123
soft edge size left 124
soft edge size right 125
soft edge size top 126
soft edge status 127
source 128
source extended 129
text on 132
tint 133
warp axis position 134
warp file 135
357
Index
read gateway configuration 192
get warp grid size 136
read 192
get warp hierarchic keystone in X direction 137
read global software version 193
get warp hierarchic keystone in Y direction 138
read 193
get warp hierarchic linearity in X direction 139
read image load method 194
get warp hierarchic linearity in Y direction 140
read 194
get warp hierarchic point shift 141
get warp keystone horizontal. Deprecated from version 1.6 142 read infrared ports 195
read 195
get warp keystone vertical. Deprecated from version 1.6 143
get warp line shift horizontal. Deprecated from version 1.6 144 read lamp CLO status 196
read 196
get warp line shift vertical. Deprecated from version 1.6 145
get warp linearity horizontal. Deprecated from version 1.6 146 read lamp CLO target lumens 197
read 197
get warp linearity vertical. Deprecated from version 1.6 147
get warp pin barrel horizontal. Deprecated from version 1.6 148 read lamp runtime 198
read 198
get warp pin barrel vertical. Deprecated from version 1.6 149
read language 199
get warp point shift. Deprecated from version 1.6 150
read 199
get warp rotation 151
read menu position 200
get warp scale horizontal. 152
read 200
get warp scale vertical. 153
read network configuration 201
get warp shift horizontal 154
get warp shift vertical 155
read 201
get warp status 156
read panel size 202
get warp X1. Deprecated from version 1.6 157
read 202
get warp X2. Deprecated from version 1.6 158
read projector runtime 203
get warp X3. Deprecated from version 1.6 159
read 203
get warp X4. Deprecated from version 1.6 160
read projector serial number 204
get warp Y1. Deprecated from version 1.6 161
read 204
get warp Y2. Deprecated from version 1.6 162
read projector status 205
get warp Y3. Deprecated from version 1.6 163
read 205
get warp Y4. Deprecated from version 1.6 164
read wifi configuration 206
get window selection 165
read 206
input format horizontal total possible 183
read wifi key Mgmt 207
phase possible 184
read 207
read auto picture alignment configuration 185
read wifi scan 208
read barscale position 186
read 208
read customer id 187
read wifi SSID 209
read date time 188
read 209
read DMX address 189
read wifi status 210
read DMX mode 190
read 210
read DMX universe 191
Representation 16
read gateway configuration 192
RS interface selection 211–212
read global software version 193
read 211
read image load method 194
write 212
read infrared ports 195
RS232 15
read lamp CLO status 196
RS422 15
read lamp CLO target lumens 197
read lamp runtime 198
read language 199
S
read menu position 200
saturation possible 213
read network configuration 201
read 213
read panel size 202
save current adjustments to a file 214
read projector runtime 203
write 214
read projector serial number 204
save custom settings 215
read projector status 205
write 215
read wifi configuration 206
save image settings 216
read wifi key Mgmt 207
write 216
read wifi scan 208
select main window as prefix 217
read wifi SSID 209
write 217
read wifi status 210
select PIP window as prefix 218
RS interface selection 211
write 218
saturation possible 213
select source 1 as prefix 219
sharpness possible 328
write 219
tint possible 331
select source 2 as prefix 220
read auto picture alignment configuration 185
write 220
read 185
select source 3 as prefix 221
read barscale position 186
write 221
read 186
select source 4 as prefix 222
read customer id 187
write 222
read 187
select window 223
read date time 188
write 223
read 188
set aspect ratio file 224
read DMX address 189
write 224
read 189
set aspect ratio height 225
read DMX mode 190
write 225
read 190
set aspect ratio width 226
read DMX universe 191
write 226
read 191
set blanking bottom 227
358
R5905446 COMMAND CATALOG 08/06/2015
Index
write 227
set blanking left 228
write 228
set blanking right 229
write 229
set blanking top 230
write 230
set brightness 231
write 231
set clamp delay 232
write 232
set clamp width 233
write 233
set color balance blue green ratio 234
write 234
set color balance red green ratio 235
write 235
set color temperature 236
write 236
set contrast 237
write 237
set dimming 238
write 238
set gamma 239
write 239
set input black balance 240
write 240
set input white balance 241
write 241
set intensity 242
write 242
set lamp status 243
write 243
set layout 244
write 244
set lcd backlight level 245
write 245
set lcd time out 246
write 246
set lens focus 247
write 247
set lens shift 248
write 248
set lens zoom 249
write 249
set lock 250
write 250
set no signal color logo 251
write 251
set no signal shutdown delay 252
write 252
set no signal shutdown status 253
write 253
set output window in native resolution 254
write 254
set output window parameters 255
write 255
set output window status 256
write 256
set P7 TCGD blue X 257
write 257
set P7 TCGD blue Y 258
write 258
set P7 TCGD cyan X 259
write 259
set P7 TCGD cyan Y 260
write 260
set P7 TCGD green X 261
write 261
set P7 TCGD green Y 262
write 262
set P7 TCGD magenta X 263
write 263
set P7 TCGD magenta Y 264
write 264
set P7 TCGD red X 265
R5905446 COMMAND CATALOG 08/06/2015
write 265
set P7 TCGD red Y 266
write 266
set P7 TCGD selection 267
write 267
set P7 TCGD white X 268
write 268
set P7 TCGD white Y 269
write 269
set P7 TCGD yellow X 270
write 270
set P7 TCGD yellow Y 271
write 271
set phase 272
write 272
set same lens settings status 273
write 273
set saturation 274
write 274
set scan/orientation configuration 275
write 275
set sharpness 276
write 276
set shutter position 277
write 277
set soft edge black level 278
write 278
set soft edge size black level bottom 279
write 279
set soft edge size black level left 280
write 280
set soft edge size black level right 281
write 281
set soft edge size black level top 282
write 282
set soft edge size bottom 283
write 283
set soft edge size left 284
write 284
set soft edge size right 285
write 285
set soft edge size top 286
write 286
set soft edge status 287
write 287
set source 288
write 288
set source extended 289
write 289
set test pattern by name 291
write 291
set test pattern convergence 292
write 292
set test pattern convergence green blue 293
write 293
set test pattern convergence red blue 294
write 294
set test pattern convergence red green blue 295
write 295
set tint 296
write 296
set warp axis position 297
write 297
set warp file 298
write 298
set warp grid size 299
write 299
set warp hierarchic keystone in X direction 300
write 300
set warp hierarchic keystone in Y direction 301
write 301
set warp hierarchic linearity in X direction 302
write 302
set warp hierarchic linearity in Y direction 303
write 303
set warp hierarchic point shift 304
359
Index
write 304
set warp keystone horizontal. Deprecated from version 1.6 305
write 305
set warp keystone vertical. Deprecated from version 1.6 306
write 306
set warp line shift horizontal. Deprecated from version 1.6 307
write 307
set warp line shift vertical. Deprecated from version 1.6 308
write 308
set warp linearity horizontal. Deprecated from version 1.6 309
write 309
set warp linearity vertical. Deprecated from version 1.6 310
write 310
set warp pin barrel horizontal. Deprecated from version 1.6 311
write 311
set warp pin barrel vertical. Deprecated from version 1.6 312
write 312
set warp point shift. Deprecated from version 1.6 313
write 313
set warp rotation 314
write 314
set warp scale horizontal 315
write 315
set warp scale vertical 316
write 316
set warp shift horizontal 317
write 317
set warp shift vertical 318
write 318
set warp status 319
write 319
set warp X1. Deprecated from version 1.6 320
write 320
set warp X2. Deprecated from version 1.6 321
write 321
set warp X3. Deprecated from version 1.6 322
write 322
set warp X4. Deprecated from version 1.6 323
write 323
set warp Y1. Deprecated from version 1.6 324
write 324
set warp Y2. Deprecated from version 1.6 325
write 325
set warp Y3. Deprecated from version 1.6 326
write 326
set warp Y4. Deprecated from version 1.6 327
write 327
sharpness possible 328
read 328
T
text off 329
write 329
text on 330
write 330
tint possible 331
read 331
U
unfreeze 332
write 332
USB-B 15
W
warp file delete 333
write 333
warp file rename 334
write 334
write 20, 22, 24, 26, 28, 30, 32, 34, 36–53, 56, 166–182, 212,
214–289, 291–327, 329–330, 332–354
3D dark time adjustment 20
3D Double/Tripple Flash limit 22
360
3D field dominance 24
3D L/R Output Reference Delay 26
3D mode 28
3D status 30
3D Sync Loop status 32
clear test pattern 34
decrement blanking bottom 36
decrement blanking left 37
decrement blanking right 38
decrement blanking top 39
decrement brightness 40
decrement color balance blue green ratio 41
decrement color balance red green ratio 42
decrement contrast 43
decrement dimming value 44
decrement gamma 45
decrement input black balance 46
decrement input white balance 47
decrement phase 48
decrement saturation 49
decrement sharpness 50
decrement shutter 51
decrement tint 52
freeze 53
function write electronic convergence 56
increment blanking bottom 166
increment blanking left 167
increment blanking right 168
increment blanking top 169
increment brightness 170
increment color balance blue green 171
increment color balance red green 172
increment contrast 173
increment dimming value 174
increment gamma 175
increment input black balance 176
increment input white balance 177
increment phase 178
increment saturation 179
increment sharpness 180
increment shutter 181
increment tint 182
RS interface selection 212
save current adjustments to a file 214
save custom settings 215
save image settings 216
select main window as prefix 217
select PIP window as prefix 218
select source 1 as prefix 219
select source 2 as prefix 220
select source 3 as prefix 221
select source 4 as prefix 222
select window 223
set aspect ratio file 224
set aspect ratio height 225
set aspect ratio width 226
set blanking bottom 227
set blanking left 228
set blanking right 229
set blanking top 230
set brightness 231
set clamp delay 232
set clamp width 233
set color balance blue green ratio 234
set color balance red green ratio 235
set color temperature 236
set contrast 237
set dimming 238
set gamma 239
set input black balance 240
set input white balance 241
set intensity 242
set lamp status 243
set layout 244
set lcd backlight level 245
set lcd time out 246
R5905446 COMMAND CATALOG 08/06/2015
Index
set lens focus 247
set lens shift 248
set lens zoom 249
set lock 250
set no signal color logo 251
set no signal shutdown delay 252
set no signal shutdown status 253
set output window in native resolution 254
set output window parameters 255
set output window status 256
set P7 TCGD blue X 257
set P7 TCGD blue Y 258
set P7 TCGD cyan X 259
set P7 TCGD cyan Y 260
set P7 TCGD green X 261
set P7 TCGD green Y 262
set P7 TCGD magenta X 263
set P7 TCGD magenta Y 264
set P7 TCGD red X 265
set P7 TCGD red Y 266
set P7 TCGD selection 267
set P7 TCGD white X 268
set P7 TCGD white Y 269
set P7 TCGD yellow X 270
set P7 TCGD yellow Y 271
set phase 272
set same lens settings status 273
set saturation 274
set scan/orientation configuration 275
set sharpness 276
set shutter position 277
set soft edge black level 278
set soft edge size black level bottom 279
set soft edge size black level left 280
set soft edge size black level right 281
set soft edge size black level top 282
set soft edge size bottom 283
set soft edge size left 284
set soft edge size right 285
set soft edge size top 286
set soft edge status 287
set source 288
set source extended 289
set test pattern by name 291
set test pattern convergence 292
set test pattern convergence green blue 293
set test pattern convergence red blue 294
set test pattern convergence red green blue 295
set tint 296
set warp axis position 297
set warp file 298
set warp grid size 299
set warp hierarchic keystone in X direction 300
set warp hierarchic keystone in Y direction 301
set warp hierarchic linearity in X direction 302
set warp hierarchic linearity in Y direction 303
set warp hierarchic point shift 304
set warp keystone horizontal. Deprecated from version 1.6 305
set warp keystone vertical. Deprecated from version 1.6 306
set warp line shift horizontal. Deprecated from version 1.6 307
set warp line shift vertical. Deprecated from version 1.6 308
set warp linearity horizontal. Deprecated from version 1.6 309
set warp linearity vertical. Deprecated from version 1.6 310
set warp pin barrel horizontal. Deprecated from version 1.6 311
set warp pin barrel vertical. Deprecated from version 1.6 312
set warp point shift. Deprecated from version 1.6 313
set warp rotation 314
set warp scale horizontal 315
set warp scale vertical 316
set warp shift horizontal 317
set warp shift vertical 318
set warp status 319
set warp X1. Deprecated from version 1.6 320
R5905446 COMMAND CATALOG 08/06/2015
set warp X2. Deprecated from version 1.6 321
set warp X3. Deprecated from version 1.6 322
set warp X4. Deprecated from version 1.6 323
set warp Y1. Deprecated from version 1.6 324
set warp Y2. Deprecated from version 1.6 325
set warp Y3. Deprecated from version 1.6 326
set warp Y4. Deprecated from version 1.6 327
text off 329
text on 330
unfreeze 332
warp file delete 333
warp file rename 334
write auto picture alignment configuration 335
write barscale position 336
write customer id 337
write DMX address 338
write DMX mode 339
write DMX universe 340
write gateway configuration 341
write infrared ports status 342
write lamp CLO status 343
write lamp CLO target lumens 344
write language 345
write menu position 346
write network configuration 347
write projector off 348
write projector on 349
write wifi configuration 350
write wifi key mgmt 351
write wifi scan 352
write wifi SSID 353
write wifi status 354
write auto picture alignment configuration 335
write 335
write barscale position 336
write 336
write customer id 337
write 337
write DMX address 338
write 338
write DMX mode 339
write 339
write DMX universe 340
write 340
write gateway configuration 341
write 341
write infrared ports status 342
write 342
write lamp CLO status 343
write 343
write lamp CLO target lumens 344
write 344
write language 345
write 345
write menu position 346
write 346
write network configuration 347
write 347
write projector off 348
write 348
write projector on 349
write 349
write wifi configuration 350
write 350
write wifi key mgmt 351
write 351
write wifi scan 352
write 352
write wifi SSID 353
write 353
write wifi status 354
write 354
361