Cyp AU-11CA Embed Audio into HDMI Manual

AU-11CA
HDMI Audio Embedder with builtin Repeater
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer file, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2019 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
3
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
•
Always follow basic safety precautions to reduce the risk of fire,
electrical shock and injury to persons.
•
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
•
Never spill liquid of any kind on or into this product.
•
Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
•
Do not attach the power supply cabling to building surfaces.
•
Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
•
Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
•
To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufficient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE
SUMMARY OF CHANGE
v2.00
First release
4
21/06/2019
CONTENTS
1. Introduction�������������������������������������������6
2. Applications�������������������������������������������6
3. Package Contents����������������������������������6
4. System Requirements���������������������������6
5. Features��������������������������������������������������6
6. Operation Controls and Functions�������7
6.1 Top Panel������������������������������������������������������ 7
6.2 Right Panel��������������������������������������������������� 7
6.3 Left Panel������������������������������������������������������ 8
6.4 Front Panel��������������������������������������������������� 8
6.5 Rear Panel����������������������������������������������������� 8
7. Connection Diagram�����������������������������9
8. Specifications�������������������������������������� 10
9. Acronyms��������������������������������������������� 11
5
1. INTRODUCTION
The HDMI Audio Inserter lets you insert an external audio signal into your
HDMI or DVI signal path. The unit allows you to insert stereo and multichannel surround sound signals to give users the capability to select
audio formats while extending your HDMI signal.
2. APPLICATIONS
Embeds external audio into HDMI signal
Integrates audio and DVI video to HDMI signal output
Replaces audio in the original HDMI signal by other input sources
3. PACKAGE CONTENTS
HDMI Audio Inserter
5 V/1 A Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as PC/Laptop or DVD player with connection
cables and HD monitor or LCD TV with HDMI cables.
5. FEATURES
Compliant with HDMI, HDCP 1.2 and DVI 1.0
Supports HDMI audio sampling rates up to 192 kHz
Supports Optical S/PDIF audio sampling rate up to 48 kHz
Supports TMDS clock frequency up to 225 MHz
Supports high-bit-rate (HBR) audio
HDMI cable distance tested with 1080p at 8-bit or 12-bit resolution,
the input and output can run up to 15 metres (8-bit) or 10 metres (12bit)
Low power consumption
Supports 3D signal
6
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
Power
1
Link
2
1 Power LED: The LED will illuminate in blue when the unit is connected
to the power supply and switched on.
2 Link LED: The LED will illuminate in green when both the source and
the display are connected and have established a link. This LED will
also blink once while the power is turned on.
6.2 Right Panel
Audio In Select
Optical
HDMI
L/R
1
Power
2
1 Audio In Select: Allows users to select among 3 different audio input
options. Switch among the original HDMI audio, Digital Audio (Optical)
and Analogue Stereo (L/R).
2 Power: Switches the unit ON or puts the device into STANDBY mode.
7
6.3 Left Panel
DC 5V
1
1 DC 5V: Connect the 5V DC power supply into the unit and plug the
adaptor to an AC wall outlet.
6.4 Front Panel
R
L
1
Input
Optical
2
HDMI
3
1 R/L Input: Connect to the audio source equipment such as a PC/
Laptop or an Hi-Fi equipment with RCA cables.
2 Optical Input : Connect to the audio source equipment such as a CD
player or an Hi-Fi equipment with an optical cable.
3 HDMI Input: Connect to the audio/video source such as a DVD/Bluray player with an HDMI cable.
6.5 Rear Panel
HDMI Out
1
1 HDMI Out: Connect to an HDMI display (LCD TV or HD monitor) or AV
Receiver to output both video and audio with an HDMI cable.
8
7. CONNECTION DIAGRAM
DVD Player
Digital Audio Input
(Optical)
PC/Laptop
Blu-ray Player
Analogue Stereo Input
HDMI Input
R
L
Input
Optical
HDMI
HDMI Out
HDMI Output
AV Receiver
HDMI Output
HDTV or Monitor
9
8. SPECIFICATIONS
Input Ports
1×HDMI, 1×Optical (Digital Audio),
1×L/R (Analogue Audio)
HDMI Audio Sampling Rate
Up to 192 kHz
Optical Audio Sampling Rate
Up to 48 kHz
Output Port
1×HDMI
HDMI Cable I/O Distance
10 metre, 1080p@12-bit
15 metre, 1080p@8-bit
HDMI Audio Format
LPCM 2/5.1/7.1, Dolby 5.1, DTS 5.1, Dolby
Digital+, Dolby TrueHD & DTS-HD Master
Audio
Optical Audio Format
LPCM 2, Dolby Digital & DTS Digital Audio
5.1
Power Supply
5 V/1 A linear power adaptor (US/EU
Standards, CE/FCC/UL Certified) or
5 V/1.2 A switching power adaptor (with
universal plug, CE/FCC/UL certified)
ESD Protection
Human body model:
±8kV (air-gap discharge)
±6kV (contact discharge)
Dimensions
90.7 mm (W)×85.8 mm (D)×34 mm (H)
Weight
107 g
Chassis Material
Plastic
Silkscreen Colour
White
Operating Temperature
0 ºC~40 ºC/32 ºF~104 ºF
Storage Temperature
−20 ºC~60 ºC/−4 ºF~140 ºF
Relative Humidity
20~90 % RH (non-condensing)
Power Consumption
2.7 W
10
9. ACRONYMS
ACRONYM
COMPLETE TERM
DVI
Digital Visual Interface
HDCP
High-bandwidth Digital content protection
HDMI
High Definition Multimedia Interface
11
CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279
Email: [email protected]
www.cypeurope.com
v2.00