Faber Inca Smart 28 SS A versatile built in range hood Technical Specifications

INCA SMART SS
INSERT RANGE HOOD
VERSATILE BUILT IN VENT HOOD.
The Inca Smart power pack is perfect for the homeowner
who wants a built in range hood that fits into most cabinets and most budgets. This compact insert fits
easily into upper cabinets as small as the standard 12” deep x 30” wide and features an exceptionally
well-finished face plate.
AVAILABLE MODELS
Model #
Size / Color
Motor Class (CFM)
Sound Levels (sones)
INSM28SS
28 Stainless
250 CFM
0.8 - 3.5 sones
KEY FEATURES
LED Indicator Push Button
Halogen Lighting
Easy Snap Mounting Clips
Backlit electronic controls with a
LED light to indicate the current
speed.
2 20 (W) bulbs offer a warmer
light for your cooking surface.
Installation is made easy with built-in
adjustable clips that tighten onto the
sides of the cabinet floor.
INCA SMART SS
INSERT RANGE HOOD
SPECIFICATIONS
DIMENSIONS
cut out dimensions
26 21/32” W / 10 9/32”D
convertible to ductless /
recirculating
yes – charcoal filter needed, need air return
back into kitchen out of cabinet
controls
4 speed electronic push w/multi-colored LED
lighting
2 x 20 (w) halogen
ducting top
5" round
grease filters
dishwasher safe SS mesh
built in mounting hardware yes - easy snap mounting clips
10 minute intensive speed
yes
AC input
120 V - 60 hz
AC power
Max 190 W at 1.6 A
green energy saver mode
yes
Front View
PERFORMANCE
SPEED
CFM
Sones
1
65
2
130
4
195
3
250
.8
1.5
2.5
3.5
ACCESSORIES
# FILTER4 –
Charcoal Filter Kit
High quality charcoal filter
for use when recirculating
the air back into the kitchen.
Filters out odor and should
be replaced every 6 months.
Some ductwork is required
to exhaust the unit out of the
Side View
# LINE30ST / LINE36ST –
Stainless Steel Liner 30
& 36" Create a perfectly
sealed, non-combustible 4"
tall perimeter to "line" the
wood below the Inca Smart.
Depth adjustable from 16" 17 7/8". For use with the 28"
Inca Smart or Inca HC only.
Cut Out
Bottom View
30" or 36"
WARNING! Product specifications are subject to
change without notification. Consult the installation
instructions before you begin installing this range
hood. * Check local make up air codes for
guidelines.
Rev :4/19
2 Cabot Road Hudson, MA 01749 • TEL: (508) 358-5353 • E-Mail: [email protected] www.faberonline.com Imagined in Italy
INCA SMART SS
INSERT RANGE HOOD
LINER SPECIFICATIONS
Liners are stainless steel kits that are optional for cabinet insert hoods. They create a metal
4” tall perimeter to “line” the wood below the range hood with metal. They create a more
finished look and move the range hood up 4” creating additional capture area. In some
cases, a liner may be required by local code if the cabinet starts at below 30” off the stove
(check local building codes). All liners are adjustable in depth with a telescoping frame.
LINE30ST – USE WITH INSM28 ONLY FOR 30” WIDE CABINETS
LINE36ST – USE WITH INSM28 ONLY FOR 36” WIDE