Geemarc AMPLIDECT COMBI 595 User guide

Charging the batteries
Charge the batteries for at least 16 hours when charging for the first time.
12 NAVIGATION KEYS
21
▲ UP
Overview
●
●
●
●
In idle mode: Press to access the redial list.
In menu mode: Press to scroll up the menu items.
In phonebook list / redial list / call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the
right.
● During a call: Press to increase the listening volume.
● During ringing: Press to increase the ringer volume.
● In menu mode: Press to scroll up the menu items.
● In Phonebook list / Redial list / Call list: Press to scroll up the list.
● In editing mode: Press to move the cursor one character to the
right.
● During a call or TAM message playback: Press to increase the
volume.
Base overview
REPEAT / OGM
● In Idle mode: Press and hold 2 sec until beep to record OGM.
/
to stop the recording.
● Press
● In TAM message playback mode: Press to go back to previous
message.
22
23
DOWN / REDIAL LIST
● In Idle mode: Press to access the redial list.
● In menu mode: Press to scroll down the menu items.
● In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
● In editing mode: Press to move the cursor one character to the left.
● During a call or TAM message playback: Press to decrease the
volume.
13
14
IN USE : ON during a call.
3
4
Congratulations!
Congratulations on purchasing your Geemarc AMPLIDECT COMBI 595
telephone. This telephone offers all the advantages of cordless technology
(compliant with Digitally Enhanced Cordless Telecommunications- DECT
standard) together with an easy to see big button keypad, ideal for those
who suffer with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to use your
Geemarc telephone to its full potential.
5
7
DELETE
ANS ON / OFF
● In Idle: Press to switch the answering machine ON or OFF.
● The cassette tape icon is displayed on the screen if activate.
26
27
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
In editing/pre-dial mode: Press to delete a character / digit.
In editing/pre-dial mode: Press and hold to delete all the
characters / digits.
● During a call: Press to mute/resume the microphone.
● In idle mode: Press to intercom another handset.
SPEAKER
11 ALPHANUMERIC KEYPAD, STAR ( ), HASH/RECALL ( /R)
● In predial or editing mode: Press to insert a digit.
● 0 key in predial or editing mode: Press and hold to insert a
pause.
● On line: Press the key R/ to make a recall.
2
Menu setting
Base menu
CALL LOG: ► Incoming call list
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: HANDSET 1-2-3 or ALL
DATE & TIME: ►DATE FORM ►TIME FORM ►SET DATE
TEXT LANG: ►ENGLISH ►FRANÇAIS ►DEUTCH ►ITALIANO
►NEDERLANDS ►ESPANOL ►PORTUGUES…
BS SETTING: ►RING SETUP ►KEY TONE ►FLASH TIME ►FIRST
RING ►DEFAULT
PAGE ALL HS
REGISTER
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►OFF ►ON
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Handset menu
CALL LOG: ►RECEIVED
PHOTO MEM: ►M1 ►M2 ►M3 ►M4
PHONEBOOK: ►ALL (ADD-VIEW-EDIT-DELETE-DELETE ALL-ADD
VIP-ADD TO PM-ADD TO SD-STATUS) ►SPEED DIAL ►VIP
CALL BLOCK: ►BLACK LIST►SETTINGS(BLOCK MODE-W/O NUM)
INTERCOM: ►BASE or HANDSET X
BS SETTING: ►BS RINGER ►RING VOL ►FLASH TIME ►FIRST RING
HS SETTING: ►RING SETUP ►TONE SETUP ►AUTO BOOST ►TEXT
LANG ►DATE & TIME ►REGISTER ►DEFAULT
SET SOS: ►SOS NUMBER ►SOS MSG ►SOS LANG
REMINDER: ►ALARM 1 ►ALARM 2 ►ALARM 3 ►ALARM 4 ►ALARM
5 ►ALARM 6 ►ALARM 7 ►ALARM 8 ►ALARM 9 ►ALARM 10
TLK DIGITS: ►ON ►OFF
ANS. SYS: ►PLAYBACK ►DEL OLD ►MEMO ►TAM ON/OFF ►SET
TAM (TAM LANG, CALL SCREEN, TAM MSG, ANS. DELAY, REC. TIME,
REMOTE ACC, CHANGE PIN, MSG ALERT)
Registration a handset
● In predial or editing mode: Press to insert a digit / character
and R.
● During a call: Press and hold R to make a Flash (Recall).
● 0 key in idle / pre-dial mode / number editing mode: Press
and hold to insert a pause.
On Base: Press
MENU/OK , select ▼/▲ REGISTER.
Press
MENU/OK to see REGISTERING... (If the registration is
successful, there will be a confirmation beep).
On Handset: Press
Press
First use of your telephone
First use of your handset
After you have inserted the batteries, the display asks you to select your
to valid.
text language with the keys ▼/▲, press
VOLUME BOOST / SOS
Press
MENU/OK , then select ▼/▲ HS settings, press
,
then select ▼/▲ language, press , than select ▼/▲ desired language and
then press
to confirm.
NOTE: Handset and base station are pre-registered. Up to four
handsets can be registered to a single base station.
29 ALPHANUMERIC KEYPAD, STAR ( ), 0, and HASH/RECALL
( R)
● In idle mode: Press to dial out to the number stored in the
memory key.
● During a call: press M4 to increase the high frequency or the low
frequencies.
. Use ▼/▲ to select REGISTER.
Intercom
Internal Call
17 EARPIECE
Then select your talking language with the keys ▼/▲, press
valid.
On Handset: Press
18 LCD DISPLAY
General menu setting
20
CHARGE LIGHT
● Steadily on when the handset is charging in the charger.
MENU / OK
● In idle mode: Press to access the main menu.
● In sub-menu mode: Press to confirm the selection.
● During a call: Press to access Intercom/ Phonebook / Redial list
/Call log/Record call.
3
to
Set the display language on the base
MENU/OK , then select ▼/▲ language, press
4
On Base: Press
, and ▼/▲ to select HS 1 - 4.
MENU/OK to call the handset.
Press
CANCEL MUTE, and ▼/▲ to select the
desired handset number, Base or ALL and press
The phone settings are always set in the same manner:
button to open the main menu.
Press
Then use ▼/▲buttons to select an entry and confirm it by pressing the
button.
The factory preset PIN code is 0000. Example:
Press
. Use ▼/▲ to select HS SETTING.
and REGISTERING is display.
Press
After a short delay, if the registration is successful, there will be a
confirmation beep, and the handset display will go back to idle mode with
the new handset number shown. The base display will also go back to
idle mode.
.
Then enter the date with the keypad and validate by pressing
Then enter the correct hour with the keypad and validate by pressing
.
19
MENU/OK to confirm.
Set the language on the handset
Registration
TALK OFF
● During a call: Press to end a call and go back to idle screen.
● In menu / editing mode: Press to go back to idle screen.
● During ringing: Press to silence the handset ringer.
8 MEMORY KEYS (3 PHOTO SPEED DIAL KEYS; 1 TONE KEY M4
● In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
CANCEL / MUTE
●
●
●
●
28
INT / MUTE / CLEAR
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing / predialing mode: Press to clear a character/digit.
In editing / predialing mode: Press and hold to delete all the
character / digits.
● During a call: Press to mute / unmute the microphone.
● In ringing: Press to silence the base ringer.
● In idle mode: Press to intercom another system handset.
9
TONE
● During a call: Press this key to increase the high frequency or
the low frequencies.
Handset overview
●
●
●
●
●
10
1
16
VOLUME BOOST / SOS
● During a call: Press to activate/deactivate the VOLUME BOOST
function.
● In idle mode: Press and hold for 3 seconds to enter the
emergency calling sequence set in your handset.
● In SOS mode: press and hold for 2 seconds to stop the
emergency call.
CALLS (CALL LIST)
● During a call: Press to activate/deactivate the VOLUME BOOST
function.
● In idle mode: Press and hold for 2 seconds to launch the
emergency calling sequence set in your phone.
● In SOS mode: press and hold for 2 seconds to stop the
emergency call.
Slide the battery cover downwards Install the
3 batteries into the socket as indicated,
matching correct polarity (+,-).
Align the cover flat against the battery
compartment, and then slide it upwards until
it clicks into place.
25
SLOW
● In idle mode: Press to access the call list.
Installation
Connecting the battery
24 MICROPHONE
PHONEBOOK:
6
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2 power adapters,
1 Charger, 1 Telephone line cord, 3 Ni-Mh batteries, 1 Quick user guide.
Connect the telephone cable to the telephone line socket (A) and to the
telephone wall socket (B).
Connect the handset curly cord to the base(E).
Connect the power adapter jack to base and charger (C) then connect the
power adapter plug in mains power (D).
NOTE: Use only the power adapters supplied with the phone.
In idle mode: Press to access the phonebook.
In menu mode: Press to scroll down the menu items.
In phonebook list / redial list / call list: Press to scroll down the list.
In editing mode: Press to move the cursor one character to the left.
During a call: Press to decrease the listening volume.
● During ringing: Press to decrease the ringer volume.
● In idle: Press to access the phonebook.
Package contents
Connecting the telephone
● In Idle mode: Press to playback messages.
● During TAM message playback: Press to stop playing messages.
● In TAM message playback mode: Press to delete the current
TAM message playback.
● In idle mode: Press and hold to delete all old messages.
MENU / OK
● In idle mode: Press to access the main menu.
● In sub-menu mode: Press to confirm the selection.
● In Redial list/Call list: Press to store the number into Phonebook.
Please refer to our website: www.geemarc.com for an up to date user
guide, as there may be important updates and changes you need to be
aware of !
15
RING light
● Flashes when there is an incoming call.
● Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering machine.
Quick User Guide
PLAY / STOP
DOWN / PHONEBOOK
●
●
●
●
●
● During TAM MSG playback: Press to playback messages in slow
speed.
1 LCD DISPLAY
2
/
TALK ON / SPEAKERPHONE
● In idle/pre-dial mode: Press to make a call in earpiece mode.
● In phonebook/redial list /call list: Press to make a call to the
selected entry in the list in earpiece mode.
● During ringing: Press to answer a call in earpiece mode.
● On line: Press again to pass in speakerphone mode. Press
again to switch to earpiece mode.
MEMO / SKIP FORWARD
● In Idle mode: Press and hold 2 sec until beep to record a memo
and press
/
to stop the recording.
● In TAM message playback mode: Press to skip to next message.
then select ▼/▲ desired language and then press
UP / CALL LIST
MENU/OK,
MENU/OK.
Call All Handsets
Base: Press
, and ▼/▲ to select ALL, press
MENU/OK
to connect.
On Handset: Make point 1 in chapter internal call and choose ALL.
Transfer an External Call
On Base: Press
number, press
MENU/OK twice, and ▼/▲ to select hanset
on handset. After connection quit the call on base.
5
On Handset:
MENU/OK, and ▼/▲ to select INTERCOM. Press
1. Press
MENU/OK.
2. Choose the desired handset number, Base or ALL and press
MENU/OK.
After connection quit the call on handset by pressing
.
Conference Call
On Handset or Base: Make procedure in chapter external call and choose
the desired handset number with the key ▼/▲.
After connection press and hold
until CONFERENCE is shown.
NOTE: Any party that hangs up during a conference call will leave the
other party still connected with the external call.
Phonebook
Your phone can store up to 50 private phonebooks with names and
numbers. Each phonebook entry can have a maximum of 20 digits for
the phone number and 10 characters for the name.
Phonebook entries are stored alphabetically by name and are identical in
the base and handset.
To add new entry
In idle mode:
On Base:
1. Press
MENU/OK, and ▼/▲ to select PHONEBOOK and press
MENU/OK to access the phonebook list (or empty).
twice
MENU/OK and select ADD.
2. Press
3. Press
MENU/OK then enter phone number.
MENU/OK and enter the name.
4. Press
MENU/OK to save.
5. Press
On handset:
1. Press
, and ▼/▲ to select PHONEBOOK and press
twice to access the phonebook list (or empty).
2. Press
and select ADD.
3. Press
then enter phone number.
4. Press
and enter the name.
5. Press
to save.
Set Speed Dial Key
On Handset
1. Press
2. Press
MENU/OK and ▲/▼ to select PHONEBOOK.
MENU/OK and ▲/▼ to select SPEED DIAL.
3. Press
MENU/OK, use. ▲/▼ to select the speed dial key.
4. Press
MENU/OK, select ADD or EDIT.
5. Press
6. Press
to confirm or
to delete.
Make SOS emergency calls
On Base
Press and hold 2 seconds
on the base to launch the
emergency calling sequence from the SOS 1 number to SOS 4 number. A
call will be first dialed to the SOS 1 number. If the SOS 1 number does
not answer in 60 seconds, the call be will made to the SOS 2 number,
and so on. See note.
On handset
Press and hold 3 seconds
on the handset to launch the emergency
, and ▼/▲ to select SOS NUMBER.
and ▼/▲ to select the SOS number to edit (SOS 1,
6
2. Press
, and ▼/▲ to select M1 to M4.
3. Press
and ▼/▲ to select ADD or EDIT and VOICE TAG.
4. Press
then enter number.
5. Press
then enter name.
to save.
6. Press
You have the option to enter a voice name in choose VOICE TAG and
RECORD at the point 3.
If you receive a call with the number registered with a voice tag, you can
hear the voice name on the base and on the handset.
NOTES:
● To use a picture big button memory in idle mode, press the picture on
the base.
● If you want to pass the call from the speakerphone to the handset, lift
the handset off the base to take the call.
Record SOS messages
On Base:
Press
ANS ON/OFF to switch the answering machine ON or OFF.
On handset:
1. Press
, and ▼/▲ to select ANS.SYS.
You can record your customized SOS message to be played when you
dial out an SOS emergency call otherwise the default message will be
played.
On Base
1. Press
MENU/OK, and ▼/▲ to select SET SOS.
MENU/OK, and ▼/▲ to select SOS MSG.
2. Press
3. Press
MENU/OK and ▼/▲ to select RECORD.
MENU/OK to start SOS message recording and
4. Press
“RECORDING ANNC...” will be displayed.
MENU/OK to save your SOS message.
5. Press
On handset:
1. Press
, and ▼/▲ to select SET SOS.
2. Press
, and ▼/▲ to select SOS MSG.
3. Press
and ▼/▲ to select RECORD.
MENU/OK then enter the NAME.
You need to set the SOS numbers before you can make SOS emergency
calls.
On Base:
1. Press
MENU/OK, and ▼/▲ to select SET SOS.
MENU/OK, and ▼/▲ to select SOS NUMBER.
2. Press
MENU/OK and ▼/▲ to select the SOS number to edit
3. Press
(SOS 1, SOS 2, SOS 3 or SOS 4).
MENU/OK and select ADD to enter a new number or EDIT
4. Press
to modify the number stored already.
MENU/OK and enter a phone number or edit the number
5. Press
stored already.
MENU/OK and enter a new name or edit the name stored
6. Press
already.
MENU/OK to confirm or
to delete.
7. Press
On handset:
1. Press
, and ▼/▲ to select SET SOS.
, and ▼/▲ to select PHOTO MEM.
● If the handset is not placed on the base, press
Play SOS messages
SOS settings
On handset:
1. Press
calling sequence from the SOS 1 number to SOS 4 number. A call will be
first dialed to the SOS 1 number. If the SOS 1 number does not answer in
60 seconds, the call be will made to the SOS 2 number, and so on. See note.
NOTE:
● The other party receiving the SOS message must press any number on
their phone to open the SOS call. Thereafter by pressing any number
on their phone every two minutes will keep the emergency call open
else the phone stops the call 10 seconds after.
● To stop the procedure launch by error, press and hold the SOS key
until the alarm SOS stop.
MENU/OK then enter the phone number.
SOS emergency call
2. Press
7. Press
4. Press
to start SOS message recording and “RECORDING” will
be displayed.
5. Press
to save your SOS message.
7. Press
MENU/OK to confirm.
To use one speed dial key, press and hold in idle mode the key between
1 to 9 for 3 seconds (you hear a beep of confirmation). It is the same
speed dial keys for the base and for the handsets cordless.
3. Press
SOS 2, SOS 3 or SOS 4).
4. Press
and select ADD to enter a new number or EDIT to
modify the number stored already.
and enter a phone number or edit the number stored
5. Press
already.
and enter a new name or edit the name stored already.
6. Press
On Base
1. Press
MENU/OK, and ▼/▲ to select SET SOS.
2. Press
MENU/OK, and ▼/▲ to select SOS MSG.
MENU/OK and ▼/▲ to select PLAY.
3. Press
MENU/OK to to start SOS message playback.
4. Press
5. Press
/
PLAY/STOP to stop SOS message playback.
On handset:
1. Press
, and ▼/▲ to select SET SOS.
2. Press
, and ▼/▲ to select SOS MSG.
3. Press
and ▼/▲ to select PLAY.
4. Press
to start SOS message playback.
5. Press
or 5 key to stop SOS message playback.
Picture big button memories
You have the choice to store 3 picture memories and one direct memory
on the base.
On Base:
MENU/OK, and ▼/▲ to select PHOTO MEM.
1. Press
2. Press
MENU/OK, and ▼/▲ to select M1 to M4.
MENU/OK and ▼/▲ to select ADD or EDIT and VOICE
3. Press
TAG.
MENU/OK then enter number.
4. Press
MENU/OK then enter name.
5. Press
MENU/OK to save.
6. Press
7
to take the line in
speakerphone mode and place the handset on the base.
Your telephone base includes a telephone answering machine that records
unanswered calls when it is on. The answering machine can store up to
59 messages within the maximum recording time of approximately 15
minutes. As well as recording incoming messages, you can record memos
for other users of your phone.
Switching Answering Machine On/Off
2. Press
, and ▼/▲ to select TAM ON/OFF.
3. Press
and ▼/▲ to select ON or OFF.
4. Press
to confirm.
Play Messages on TAM
If you have new messages, the display will show e.g.2 NEW MESSAGES,
which means you have 2 new messages. The new messages are played
first, and then are saved as old messages, until they are deleted. Old
messages are played again after all new messages are played completely.
On Base: Press
/
PLAY/STOP to start the playback.
On handset:
1. Press
, and ▼/▲ to select ANS.SYS.
, and ▼/▲ to show PLAYBACK.
3. Press
to start message playback and the screen displays the
date and hour of the message received.
4. During message playback, press ▼/▲ to adjust the message playback
volume respectively.
NOTES: After new message is played, the new message will be
saved as an old message automatically unless it is deleted.
and ▼/▲ to select STOP, FORWARD, PREVIOUS or
5. Press
DELETE to perform the following functions during message playback.
● STOP: Stop the current message playback and return to the ANS.
MACHINE menu.
● SLOW ON: to reduce the speed of the playback.
● FORWARD: Skip to play the next message.
The date and hour information of the next message will display if
there is next message.
● PREVIOUS: Skip to repeat playing the current message from the
beginning. The date and hour information of the current message
will display.
● DELETE: Delete the current message and the next message will be
played.
6. Press
, and ▼/▲ to select ANS.SYS.
2. Press
, and ▼/▲ to show SET TAM.
3. Press
and ▼/▲ to select ANSWER DELAY.
and ▼/▲ to choose: 2 RINGS, 4 RINGS, 6 RINGS, 8
4. Press
RINGS, 10 RINGS or TOLL SAVE.
5. Press
to confirm the setting.
REMOTE OPERATIONS
If you are away from your home, you can call your answering machine to
switch on or off the answering machine and listen to your messages
remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts playing
OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
KEY
FUNCTION
While message is not playing
While message is playing
2
Delete the current message
playback
Repeat playing the current
message from the beginning.
Press twice to skip backward to
the previous message
Stop the current message playback
4
Answering machine
2. Press
1. Press
to confirm the setting.
Set the Answer Delay
You can set the number of rings before the answering machine answers
and starts playing your OGM. You can set the answering machine to
answer after two to ten rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first
new message has been registered then the answering machine switches
to answering after approximately 2 signals. This is useful when using
remote access; if you call up the answering machine and there is no reply
after four rings it means there are no messages recorded and you can
hang up before you are charged for the call.
On handset:
8
5
6
7
9
Skip forward to play the next
message
Turn on the answering machine
Turn off the answering machine
Enter the 4-digit remote access
PIN
NOTES:
● When your answering machine memory is full, the answer mode will
change to ANSWER ONLY automatically.
● It will change to ANS & RECORD mode automatically after some
messages have been deleted.
● You cannot delete new messages until they have been listened to.
FUNCTION MESSAGE ALERT
When you have a new message, you can hear a beep every 10 seconds.
If you want deactivate this beep, follow the procedure.
Using the handset:
1. Press
, and ▼/▲ to select ANS.SYS.
2. Press
, and ▼/▲ to show SET TAM.
3. Press
and ▼/▲ to select MSG ALERT.
4. Press
and ▼/▲ to select OFF.
5. Press
to confirm.
Alarm function
You have the choice to enter 10 Alarms.
On handset:
1. Press
, and ▼/▲ to select REMINDER.
2. Press
, and ▼/▲ to select your alarm.
3. Press
and ▼/▲ to select ON/OFF.
4. Press
and select ON.
5. Press
and enter the time.
6. Press
and choose the frequency.
7. Press
to confirm.
FunctionourFirst
Sometimes,
phonering
rings one time to inform that we have any voice
message on the line. To remove this ringer, you must activate the function.
On the base In idle mode :
1. Press
MENU/OK, and ▼/▲to select BS SETTING.
2. Press
MENU/OK and ▼/▲to select FIRST RING.
MENU/OK and select ON.
3. Press
4. Press
to save.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth. Do not use
any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc product is purchased, Geemarc
guarantee it for the period of two years. During this time, all repairs or
replacements (at our discretion) are free of charge. Should you
experience a problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or breakages to
any parts. The product must not be tampered with or taken apart by
anyone who is not an authorized Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A
WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS
CE Directives
Geemarc Telecom SA hereby declares that this product is in compliance
with the essential requirements and other relevant provisions of the Radio
and Telecommunications Terminal Equipment Directive RED 2014/53/UE.
The CE declaration of conformity may be consulted at www.geemarc.com
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has been put in
place for the products at the end of their useful life are recycled in the
best way.
When this product is finished with, please do not put it in your domestic
waste bin. Please use one of the following disposal options:
- Remove the batteries and deposit them in an appropriate WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a new one, they
should accept it.
Thus if you respect these instructions you ensure human health and
environmental protection.
Technical specifications
Basic Information
Valid Range:
Indoor : 50m I Outdoor:300m
Standby time : 100 hours
Handset
Operating Time: Talk time : 10 hours approx
RF Parameter
Frequency:
1.88 GHz to 1.9GHz
Nb Channels:
10
Power Supply
Base:
Input:100-240V 50/60Hz; Output: 6V, 800mA adapter
Charger:
Input:100-240V 50/60Hz; Output: 6V, 450mA adapter
Handset:
3 batteries, AAA 1.2V/600mAh rechargeable
Talking function
You have the choose to activate or deactivate the function Talking Digits.
Activate: this function announces the digit dial or the CID number when
you receive a call and that you have subscribed to the service.
On Base:
MENU/OK, and ▼/▲ to select TLK DIGITS.
1. Press
MENU/OK, and ▼/▲ to select ON to OFF.
2. Press
MENU/OK to confirm.
3. Press
On handset:
, and ▼/▲ to select TLK DIGITS.
1. Press
2. Press
3. Press
, and ▼/▲ to select ON to OFF.
For product support and help visit our website at ww.geemarc.com
United Kingdom: 5B Swallow Court, Swallowfields, Welwyn Garden
City, Hertfordshire, AL7 1SB,UK
telephone 01707 387602
or fax 01707 832529
UGAMPLIDECTCOMBI 595_En_A3+_V1.3
to confirm.
9
10