Giant Neos Owner Manual
Add to my manuals
23 Pages
Giant Neos is an ANT+ digital multi-function computer compatible with all ANT+ sport transmission devices, including Giant RideSense integrated in selected Giant bikes. It provides current speed, upper mode data (ride time, distance traveled, current cadence, current heart rate), various modes (clock, ride time, stopwatch, distance traveled, current cadence, current heart rate), bike selection (Bike1/Bike2), a pacer, service interval reminder, low battery indicator, and sleep mode.
advertisement
▼
Scroll to page 2
of 23
- English - Content 1 Introduction Reset Computer Set Unit 3 Unit Reset Trip Data 27 Set Smart EL Parts 5 Installation 7 General Operation Display 13 Compatible Sensor Pairing 15 Searching 17 Enter Setting Mode 29 Mode / Sub Mode Functions 19 Set Clock 31 Clock Set Odometer 21 Set Wheel Size 23 Set Countdown Distance Set Heart Rate Limit 25 Set User Data Date Ride Time 33 ODO Distance Countdown 35 Cadence Heart Rate Calories 37 Average Maximum Speed Bike1 / Bike2 39 Trouble Shooting 41 Technical Specification Introduction Introduction Thanks for purchasing a Giant Neos computer, it is an ANT+ digital multi-function computer. It is compatible with all ANT+ sport transmission devices, including Giant RideSense which is integrated in selected Giant bikes. For your own safety, please do not stare at the computer screen while riding, it may cause a dangerous situation during the ride. With digital ANT+ sport transmission, you can get the information from digital speed/cadence sensor and digital heart rate belt. Please make sure you pair these sensors before you start riding. If you have any questions regarding this product, please visit our website at www.giant-bicycle.com or contact your local dealer. Enjoy the ride! 1 2 Unit / Parts 4 3V 1 7 2 + 3 5 6 9 8 X2 3 032 CR2 Unit / Parts Neos computer package contains 1 unit and 8 parts. 1. Computer Unit 2. Base Mount 3. Rubber Pad 4. Battery Cap 5. CR2032 Battery 6. O-ring 7. Extended Mount + 2 x C-clamp pads (for ø31.8 and 29.7mm handle bar) 8. 2 x Screws for Extended Mount 9. Zip Tides x 3 X3 4 Installation C. 4 + 3V CR2032 B. A. A. 1 5 8 7 2 Installation To install the battery, use a coin to open and close the battery cap. Computer can be mounted in 3 different positions: (A) Extended Mount (B) Stem (C) Handle Bar. CLICK PULL 6 B. C. 2 1 2 1 1 3 10 5 3 10 6 General Operation / Display CLICK 7 GENERAL OPERATION / DISPLAY There are 4 main keys on the computer unit. EL key: Manual key for backlight M key: Operates the Mode functions, it also can be pressed on the bottom of unit when it is mounted. S key: Operates the Sub Mode funtions in Mode display. U key: Operates the Upper Mode functions. 1. Current Speed Display the current speed in km/h or m/h. 2. Upper Mode Press U key to display: Ride Time / Distance Travelled / Current Cadence (if paired) / Current Heart Rate (if paired) 3. Mode Press M key to display: Clock / Ride Time/ Stopwatch / Distance Travelled / Current Cadence (if paired) / Current Heart Rate (if paired) 4. Bike1 / Bike2 Indicate the display data for Bike1 or Bike2 8 General Operation / Display 9 5. Pacer The pace arrow shows the comparison between current speed and average speed. If the current speed is above or equal to average speed, the up arrow displays; if the current speed below the average speed, the down arrow appears. 6. Service Interval Reminder In any mode, if Travelled Distance > 500km, it will appear to remind the user to maintain the bike. It is independent of trip distance & odometer. To turn off the icon by pressing the M Key for 2 seconds or it will turn off automatically after 50km. 7. Low Battery Indicator In any mode, if battery < 2.7V, the low battery sign will display. 8.Sensor Sleep If no speed sensor magnet is detected for more than 20 minutes, the current speed will display dash bars. If no cadence sensor magnet is detected more than 20 minutes, it will display dash bars in cadence mode. If no heart rate monitor is detected for more than 3 minutes, in heart rate mode, it will display dash bars. 9. % Distance Countdown Bar Shows the percentage of whole pre-set countdown distance. It only works with Distance Countdown feature (see p.23-24 ) 10 General Operation / Display 10. Sleep Mode The computer unit will turn to SLEEP mode after all sensors sleep more than 5 minutes. 11. Paired Sensor Icons The sensors icons will display in sleep mode if the sensor was paired previously. C: cadence sensor, Heart: Heart rate monitor, S: speed sensor. If the computer can’t find the sensors, please make sure the sensor is reacting with magnet while pairing or it is not in sleep mode. 12. Searching If the computer is not in SLEEP mode, but on the mount, when you move the bike, the computer wil automatically start searching. The longest time for searching is 30 seconds, effective distance for transmission is within 1 meter. 11 12 Compatible Sensor / Pairing 2 in 1 Sensor Compatible Sensor Neos computer is compatible with all ANT+ 2.4G digital transmission device sensors, including Giant Ride Sense sensor in selected Giant bikes or 2 in 1 sensor in accessories. The sensor is not included in the package. Pair the sensor with computer unit before starting to ride. Pairing Press M+S keys for 2 seconds to enter the pairing mode. Press U key to confirm and it will start pairing automatically. It will display paired with the closest device, or press S or M key to release the pairing mode. The longest time for pairing is 1 minutes, effective distance for transmission is within 1 meter. 13 14 Searching / Record Reminder / Reset Computer / Reset Trip Data Searching In Sleep mode, When bike is moving or press U+EL keys for 2 seconds, computer will start searching for paired devices. The longest time for searching is 30 seconds, effective distance for transmission is 1 meter. Reset Computer When the computer is not working or the screen is blank after installing the battery, press the AC button at back of unit to reset the computer back to original setting. Reset Computer 15 Reset Trip data Reset Trip Data In any mode, hold S key for 3 seconds, to reset all trip data. 16 Enter Setting Mode Enter Setting Mode 1. Press U key for 3 seconds to enter the setting modes. Select the parameter setting by pressing S or M key in sequence loop of Clock, Odometer, Wheel Size, Countdown Distance, Heart Rate Limit, User Data, Unit, Smart EL, and Exit. Press U key to enter particular parameter setting or return to previous mode in Exit. 17 18 Set Clock / Set Odometer Set Clock Select “CLOCK” in setting mode, and press U key to enter Clock setting. Follow the key flow diagram. Select 24 hours set or 12 hours set by pressing S or M key and confirm it by U key. Press S or M key to adjust the hour, minute, year, month and date and confirm it by U key. (Tips: press and hold S or M key will speed up the digital number setting). Set Odometer Select “ODOMETER” in setting mode, and press U key to enter Odometer setting, Follow the key flow diagram. Press S or M key to select Bike1 or Bike2, and press U key to enter the odometer digits setting. Adjust the number in blinking digit by pressing S or M key, and press U key go to next digit. Press U to confirm the number in each digit and leave the Odometer setting mode. 19 20 Set Wheel Size *Same as Bike2 setting WHEEL CIRCUMFERENCE EASY CALIBARATION & CIRCUMFERENCE REFERENCE TABLE Tire Size 700x20C 700x23C 700x25C 700x28C 700x32C 700x35C 700x38C 600x23C 26x1.5 26x1.90 26x1.95 26x2.0 26x2.1 26x2.2 Custom 21 a. (mm) 2086 2096 2105 2136 2155 2168 2180 1930 2010 2045 2050 2055 2068 2075 0-3999 Set Wheel Size Select “WHEEL SIZE” in setting mode, and press U key to enter Wheel Size setting. Follow the key flow diagram. Press S or M key to select Bike1 or Bike2 and press U key to set the wheel size. Press S or M key to choose the Tire Sizes or you can enter the wheel circumference in Custom option. 22 Set Countdown Distance / Set Heart Rate Limit Set Countdown Distance Select “ĻDISTANCE” in setting mode, and press U key to enter Countdown Distance setting. Follow the key flow diagram. Press S or M to adjust the number in different digit, and press U to confirm it. The preset range for countdown distance is 1 to 50km or 1 to 31 mile. Set Heart Rate Limit Select “HRT LIMIT” in setting mode, and press U key to enter Heart Rate Limit setting. Follow the key flow diagram. Press S or M to adjust the Upper rate and Lower rate, and press U key to confirm it. The preset highest Upper limit is 240, the lowest Lower limit is 30. (Tips: press and hold S or M key will speed up the digital number setting). 23 24 Set User Data / Set Unit Set User Data Select “USER DATA” in setting mode, and press U key to enter User Data setting. Follow the key flow diagram. Press S or M key to select Male or Female and press U key to set personal weight, the range is 20 ~ 220 kg or 44 ~ 485 lb. (Tips: press and hold S or M key will speed up the digital number setting). Set Unit Select “UNIT” in setting mode, and press U key to enter Unit setting. Follow the key flow diagram. Press S or M key to select Speed in KM/H or M/H, Weight in KG or LB. 25 26 Set Smart EL Set Smart EL (Backlight) Select “SMART EL” in setting mode, and press U key to enter Smart EL setting. Follow the key flow diagram. Press S or M key to turn Smart EL function on or off, and press the U key to confirm it. To preset its function Start Time and End Time press S or M key to set hours and minutes and press U key to confirm it and go next step. 27 28 Mode / Sub Mode Functions Mode / Sub Mode Functions In Mode display press M key to display Clock/ Ride Time/ Stopwatch/ Distance Travelled/ Current Altitude/ Gradient%/ Ave. Speed/ Current Power/ Max. Temperature, and press S key to display the Sub functions under the main Mode functions. 29 30 Clock / Date / Ride Time Clock / Date Clock display in 12hrs / 24hrs set, press S key to display date (MM-DD-YY). It will return to Clock automatically after 3 seconds if S key is not pressed. Ride Time Ride Time / Total Bike1 Ride Time / Bike1+Bike2 Ride Time Ride Time display the trip riding time, and press S key to display Total Bike1 trip ride time and Bike1+Bike2 ride time. It will return to Ride Time automatically after 3 seconds if S key is not pressed. 31 32 ODO / Distance Countdown ODO In Distance mode, press S key to display Bike1 ODO and Bike1+2 ODO. See distance countdown by pressing S key. Distance Countdown In Distance Countdown mode, hold M key to reset and start the timer. When the timer is running, hold EL key to see the estimated arrival time and release EL key to see the previous display. Upon arrival at destination, press S key to return the preset distance display. If there is no speed input or the remaining time is more than 24 hours, it will display --:--. Hold M key to stop distance countdown function. 33 34 Cadence / Heart Rate / Calories Cadence In Current Cadence display, press S key to display Average Cadence and Maximum Cadence. It will return to Current Cadence automatically after 3 seconds if S key is not pressed. Heart Rate / Calories In Current Heart Rate press S key to display Average Heart Rate, Maximum Heart Rate, Heart Rate Lower Zone Time, In Zone Time, Upper Zone Time, and Calories Consumed during trip. It will return to Current Heart Rate automatically after 3 seconds if S key is not pressed. When the heart rate exceeds the Upper Limit or Lower Limit heart rate, the LCD display will flash as a warning. 35 36 Average / Maximum Speed /Bike1 / Bike2 Average / Maximum Speed In Average Speed Mode, press S key to display Max Speed. It will return to Average Speed automatically after 3 seconds if S key is not pressed. Bike1 / Bike2 Under Average Speed mode, hold M key to swap Bike1 / Bike2. If the stopwatch is running, it can’t be swapped between Bike1 and Bike2. 37 38 Trouble Shooting Problem No LCD display No Current Speed / Cadence display LCD display is blinking 39 Possible Cause Solution Battery is dead Replace battery Battery is installed in wrong position Install battery in correct position Computer is in shipping mode Press the AC button which is located on the back side of the computer once after install the battery. Magnet is misaligned or too far away Readjust the magnet and sensor position Not paired yet Pair the Sensor Heart rate monitor visual alarm is On, current heart rate exceeds the upper/ lower heart rate limit Re-setting the heart rate limits (upper/ lower heart rate limit) Problem Possible Cause Solution Magnet is misaligned or too far away Readjust the magnet and sensor position Sensor battery is low battery Replace the sensor battery Heart rate belt does not pair Heart Rate Monitor needs to be reset Take the battery out from the belt, discharge the belt by reversing the battery upside down and insert into the battery compartment for 2 seconds, then take the battery out and insert it back to the battery compartment with correct polarity and do the pairing again. Display Sensor is asleep Wake up the speed/ cadence sensor with magnets connecting or wake up heart rate monitor by wearing the heart rate belt on chest Erratic Data 40 Technical Specification Current Speed 199.9Km/h or m/h Ride time 1 19:59:59 (HH:MM:SS) Current Heart rate 30-240 bpm Maximum Cadence 30 ~ 240 rpm Average Speed 199.9Km/h or m/h Ride time 2 19:59:59 (HH:MM:SS) Average Heart rate 240 bpm Low battery indication 2.7V Maximum Speed 199.9Km/h or m/h Total Ride time 1 99:59 (HH:MM) Maximum Heart rate 240 bpm Smart backlight 6:00pm~12:00am(default) Distance 1 999.99 km or m Total Ride time 2 99:59 (HH:MM) Duration below/within/ over HR limit 19:59:59 (HH:MM:SS) Distance countdown 1~50km Distance 2 999.99 km or m Total Ride time 1+2 199:59 (HH:MM) Calorie 9999 kcal Dimension: 42.5(W)x52(H)x16(T) ODO 1 99999 km or m 2nd Wheel size 0-3999mm Easy Calibration 14 + custom Weight: 38g ODO2 99999 km or m Time (12/24hr) 12/24 Cadence 30 ~ 240 rpm Battery Operation Life: 10 month (1 hr/day usage) 199999 km or m Auto sleep 10 min Average Cadence 30 ~ 240 rpm ODO 1+2 41 42
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Compatible with all ANT+ sport transmission devices
- Large, easy-to-read display
- Backlight for night riding
- Water-resistant design
- Tracks speed, distance, time, calories, and heart rate
- Sets goals and tracks progress
- Wireless connectivity
- Easy to use
Related manuals
Frequently Answers and Questions
How do I pair my Giant Neos with my ANT+ sensors?
To pair your Giant Neos with your ANT+ sensors, press the M+S keys for 2 seconds to enter the pairing mode. Press U key to confirm and it will start pairing automatically. It will display paired with the closest device, or press S or M key to release the pairing mode. The longest time for pairing is 1 minutes, effective distance for transmission is within 1 meter.
How do I reset my Giant Neos?
To reset your Giant Neos, press the AC button at the back of the unit.
How do I change the battery in my Giant Neos?
To change the battery in your Giant Neos, use a coin to open the battery cap. Insert the new battery (CR2032) with the positive (+) side facing up. Close the battery cap.
advertisement