Uniden LRD850 Owner Manual


Add to my manuals
12 Pages

advertisement

Uniden LRD850 Owner Manual | Manualzz
LRD850
LONG RANGE Radar/Laser Detector
Detailed User’s Manual
© 2015 Uniden America Corporation
Irving, Texas
Issue 1, April 2015
CUSTOMER CARE
At Uniden®, we care about you!
If you need assistance, please do NOT return this product to your place of purchase. Our customer care
specialists are available to serve you.
Save your receipt/proof of purchase for warranty.
Quickly find answers to your questions by:
1. Reading your owner’s manual.
2. Visiting our customer support website at www.uniden.com.
3. Calling our customer care specialists at 1-800-297-1023.
Images in this manual may differ slightly from your actual product.
DISCLAIMER: Radar detectors are illegal in some states. Some states prohibit mounting any object on your
windshield. Check applicable law in your state and any state in which you use the product to verify that using
and mounting a radar detector is legal. Uniden radar detectors are not manufactured and/or sold with the
intent to be used for illegal purposes. Drive safely and exercise caution while using this product. Do not change
settings of the product while driving. Uniden expects consumer’s use of these products to be in compliance with
all local, state, and federal law. Uniden expressly disclaims any liability arising out of or related to your use of this
product.
CONTENTS
CUSTOMER CARE........................................................................................................................................ 2
FEATURES.......................................................................................................5
INSTALL AND TURN ON LRD850...................................................................5
INSTALL........................................................................................................................................................... 5
Windshield................................................................................................................................................ 5
Dashboard................................................................................................................................................. 5
TURN ON........................................................................................................................................................ 5
WHAT’S IN THE BOX.......................................................................................6
PARTS OF THE LRD850..................................................................................6
NON-KEY ELEMENTS................................................................................................................................. 7
MENU SYSTEM................................................................................................7
BASIC OPERATIONS.......................................................................................8
FEATURE DETAILS..........................................................................................8
HIGHWAY VS CITY MODE........................................................................................................................ 8
POP MODE..................................................................................................................................................... 9
SCAN DISPLAY............................................................................................................................................. 9
ALARM PRIORITIES..................................................................................................................................... 9
MAINTENANCE...............................................................................................9
MAINTAINING THE EQUIPMENT........................................................................................................... 9
UPDATING THE FIRMWARE..................................................................................................................... 9
TROUBLESHOOTING......................................................................................9
SPECIFICATIONS..........................................................................................10
ONE-YEAR LIMITED WARRANTY................................................................11
UNIDEN
LONG RANGE RADAR/LASER DETECTOR
DETAILED USER’S MANUAL
LRD850
FEATURES
• Super Long Range Laser Radar Detection
• Voice Notifications
• Radar band frequency displays
• Easy to read OLED display
• Advanced K band filter
• Invisible to VG-2™ and Spectre I/IV/IV+™ radar detectors; Spectre I and IV undetectable
• Signal Strength Meter displays Vehicle Battery Voltage.
INSTALL AND TURN ON LRD850
You can mount the LRD850 on the windshield (bracket included) or on the dashboard (hook and loop tape
included).
INSTALL
Windshield
When you mount the LRD850 on the windshield, mount it in the middle of the windshield between the driver
and passenger. Be sure there are no obstructions and that there is a clear view through the back window.
1. Attach the rubber suction cups to the bracket and push the cups firmly onto the windshield.
2. Slide the unit onto the bracket until it clicks into place.
3. Plug the power cord into the LRD850 and plug the cigarette lighter adapter into the vehicle’s cigarette
lighter.
4. The LRD850 automatically turns on and runs through a self test cycle.
Release the LRD850 from the bracket by pressing the Eject key on top of the detector.
Dashboard
The same types of mounting requirements for the windshield apply for mounting the unit on the dashboard.
1. Attach the unit to the dashboard using the hook and eye fastener tape.
2. Plug the power cord into the LRD850 and plug the cigarette lighter adapter into the vehicle’s cigarette
lighter.
3. The LRD850 automatically turns on and runs through a self test cycle.
Pull the bracket from the dashboard, separating the hook and loop tape.
TURN ON
1. Inert the power cord’s RJ45 connector into the LRD850s power jack.
2. Insert the power cord’s cigarette lighter adapter into the vehicle’s cigarette lighter port.
3. The LRD850 automatically turns on and runs through a systems check.
-5-
WHAT’S IN THE BOX
LRD850 Radar Detector
12V DC Power Cord with RJ45 Connection
Not Shown:
Hook and Loop Fastener Tape
Spare Fuse for DC Power Cord
Quick Start Guide
Windshield Mounting Bracket
PARTS OF THE LRD850
Power
Jack
Audio
Jack
VOL +
Eagle
Eye
CITY
MENU
Latch
Slot
Signal
Strength
MUTE/DIM
USB
KEY
POWER
VOL +
VOL –
Eject
POWER
VOL −
PRESS TO...
Turn LRD850 on and off.
• Turn volume up (6 levels).
• In Menus, go to next item.
• Turn volume down (6 levels).
• In Menus, go to previous item.
PRESS AND HOLD TO...
NA
NA
MENU
• Access the Menu system.
• In the Menu system, press to cycle through
options for the current menu item.
MUTE/DIM MUTE
• MUTE on - Press MUTE/DIM to mute an alarm.
Returns to normal operation 10 seconds after the
alert ends or if a different band is detected during
Mute mode. Mute On displays for a few seconds.
• MUTE off - Press MUTE/DIM to restore audible
alarms before the 10 second automatic mute
time-out.
-6-
Exit the Menu system.
DIM - Changes the OLED, Key Backlight,
and Strength LED intensity:
• Bright
• Dim
• Dark
KEY
CITY
PRESS TO...
Press to change modes between HIGHWAY and
CITY.
PRESS AND HOLD TO...
NA
NON-KEY ELEMENTS
ELEMENT
Eagle Eye
Latch Slot
Mini USB
Audio Jack
Eject
Power Jack
Signal Strength
WHAT IT DOES
Provides a 360° monitoring radius.
Insert the bracket latch into this slot.
Provides PC connection for data updates.
Plug in headset.
Press to release the bracket latch.
Plug the 12V Power Cord here.
Displays how strong the signal received is (5 levels).
MENU SYSTEM
Menus let you set up the system to your own requirements. You can select the backlight brightness, turn
different bands on and off, and set specific items such as auto mute.
Press MENU to access the Menu system. The screen displays the selection’s current status. For example, if you
press MENU and the screen displays Voice: ON, you have the option of turning Voice to OFF.
Use the following keys to navigate the menus:
xx MENU: Change a menu item setting (press and hold to exit the Menu system).
xx VOL + : Go to the next Menu item.
xx VOL – : Go to the previous Menu item.
MENU ITEM
Voice
X Band
K Band
Ka Band
Laser
POP Mode
K Band Filter
Display
WHAT IT DOES
Turns voice alert on or off under the following
conditions:
• Type of radar/laser
• Band alarms
Turn off to have the detector ignore X Band frequencies
(Highway only).
SETTINGS
On
Off
On
Off
Turn off to have the detector ignore K Band frequencies. On
Off
Turn off to have the detector ignore Ka Band
On
frequencies.
Off
Turn off to have the detector ignore lasers.
Detects POP transmissions (very brief transmissions, too On
fast for some detectors to hear).
Off
Filters noise from the K band to prevent false detections. On
Off
Lets you set the following
xx Voltage
V
xx Off
-7-
MENU ITEM
Auto Mute
Backlight
BAT Warning
Selt Test
Factory Reset
Firmware
Version
EXIT
WHAT IT DOES
Auto Mute reduces alarm level to 1 after 3 seconds
and returns to normal operation (Auto Mute = OFF) 10
seconds after the alert ends. If the same alarm sounds
within the 10 second period, Auto Mute remains at level
1. The unit returns to normal operation (Auto Mute =
OFF) if a different band is detected during Auto Mute =
ON mode.
Turns the backlight on and off.
Press and hold MUTE/DIM to select a brightness level.
Issues a warning if the vehicle battery power drops
below 11V.
SETTINGS
On
Off
Closes the Menu system.
NA
On
Off
On
Off
Runs a self diagnostic test on the unit to check for faults. On
Off
Resets all settings to the factory defaults.
NA
There is no confirmation request for reset.
Displays the latest firmware version.
NA
BASIC OPERATIONS
HOW DO I ...?
Turn on the LRD850
Adjust the volume
Mute alarm volume during the
alert
Change the screen’s brightness
Turn bands on and off
Change Highway to City and
back
Update the firmware
TRY THIS...
Press POWER. The unit turns on and runs through an initial self-check. It
displays the different bands and their settings.
The LRD850 turns on automatically when you start the vehicle.
• Press VOL + to increase volume. The unit beeps, announces “Volume (0 6),” and displays a number increase.
• Press VOL – to decrease volume. The unit beeps, announces “Volume (0 6),” and displays a number decrease.
Press MUTE/DIM during an audio alarm to mute it. (This is especially useful
in situations where the alert may be prolonged, such as at red lights.)
Press and hold MUTE/DIM. The LRD850 announces the brightnes level
(Bright, Dim, or Dark) as it changes to that level. Press and hold the keys
again to cycle between the brightness levels.
Press MENU and cycle through the menu options until the band you want to
turn off displays. Press MENU again to change that band’s status.
Press CITY for at least 1 second to alternate between HIGHWAY and CITY
setting.
Refer to LRD850 Firmware Update Guide on www.uniden.com for details.
FEATURE DETAILS
HIGHWAY VS CITY MODE
Radar detectors operate with various sensitivity levels. These levels determine the types of signals and signal
ranges (bands) detected. Highway mode is the most sensitive level while City mode is the least sensitive. If the X
band is left on in City mode, a radar detector can pick up many X band signals (such as garage door openers) that
generate false alerts. The LRD850 turns off the X band for City mode. When you are on the highway, there is less
chance of picking up X band false alerts, so the LRD keeps the X band on.
-8-
Press CITY to alternate between HIGHWAY and CITY mode.
POP MODE
In POP mode, the LRD850 can detect short burst from radars that are too fast for many other detectors to catch.
You can turn POP mode on and off.
SCAN DISPLAY
A small dot on the screen indicates that the unit is scanning for signals. This dot travels back and forth in the
middle of the screen.
Scan Display
11.9
.
C-NoX
CITY
Elements on the screen vary according to what you turn on
and off in the Menu system
ALARM PRIORITIES
xx Laser signal
xx X, K, Ka Band signal
xx Vehicle Low Battery Voltage Warning
MAINTENANCE
MAINTAINING THE EQUIPMENT
The LRD850 requires very little physical maintenance. Wipe it with a soft cloth to keep dust from accumulating.
Check the power cord connections to keep them clean and free of corrosion.
UPDATING THE FIRMWARE
Uniden recommends that you update your LRD850’s firmware periodically. Go to www.uniden.com to check if
you have the latest firmware. If you need to update your firmware, refer to LRD850 Firmware Update Guide on
www.uniden.com for details.
TROUBLESHOOTING
IF...
The unit won’t turn on
No display or audio.
TRY THIS...
Check the connections. Be sure they are all secure.
xx If no display, check the connections. Be sure they are
all secure.
xx If no audio, check if Voice is turned off.
The unit alarms when the vehicle hits bumps.
Check the connections. Be sure they are all secure.
The unit alarms briefly in the same location but There may be a motion sensor or house alarm in use
no radar source was in view.
within range.
The LRD850 did not alert when a police car was • The officer may not have radar/laser units turned on.
in view.
• Check that the band is turned on. Press MENU and
cycle through the options to get to the bands. If the
band is turned off, the OLED will show OFF. Turn the
band on.
-9-
IF...
TRY THIS...
The vehicle starts but the LRD850 does not turn • Verify that the power cord is securely connected to
on.
the unit and inserted into the cigarette lighter jack.
• Change the fuse in the power cord. Unscrew the
cigarette lighter jack to access the fuse.
SPECIFICATIONS
Receiver Type:
Antenna Type:
Radar Double Conversion Superheterodyne Radar
Self-Contained Antenna
Laser Pulsed Laser Signal Receiver
Laser
Front
Frequency:
Laser
Back
X
10.525 GHz
Dimensions
K
Ka
Laser
24.150 GHz
33.400 - 36.000 GHz
Weight
Operating Temp.
800 nm - 1100 nm
Storage Temp.
Detector Type:
Radar Scanning Frequency Discriminator
Laser Pulse Width Discriminator
Alarm Beep (Detected Band and Signal
Type
strength)
Operating Power Source
USB Interface
- 10 -
Linear Polarized E-vector
Vertical
Convex Condenser Lens
Concave Condenser Lens
110.00 mm (D) x 69.00 mm
(W) x 29.50 mm (H)
6 oz (170g)
-4° to +185° F (Radar/Laser)
-20° to +85° C (Radar/Laser)
-22° to +203° F (Radar/Laser)
-30° to +95° C (Radar/Laser)
DC 11.0 to 16.0 V
USB Specification 2.0/1.1
FCC/Industry Canada Information
FCC: AMWLRD950
ICC: 513C-LRD950
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Unauthorized changes or modifications to this equipment may void compliance with the FCC Rules. Any change or modification
must be approved in writing by Uniden. Changes or modifications not approved by Uniden could void the user’s authority to
operate the equipment.
L’appareil est conforme aux normes d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Ce
dispositif ne doit pas causer d’interférences et (2), il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son
fonctionnement normal.
Tous les changements apportés à cet appareil, s’ils ne sont pas expressément approuvés par Uniden ou toute utilisation de celuici d’une autre manière que celle décrite dans ce guide peut annuler votre autorisation de le faire fonctionner.
ONE-YEAR LIMITED WARRANTY
Keep your receipt! Proof of purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORP. (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from
defects in materials and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date
of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B)
modified, altered, or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) improperly
installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered
by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F)
installed or programmed by anyone other than as detailed by the Operating Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this war-ranty is in effect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and
handling) incurred by warrantor or its representatives in connection with the performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES
ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or
exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This warranty is void outside the United States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in this Operating Guide, you are
certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Include evidence of original
purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by
traceable means, or delivered, to warrantor at:
Uniden America Corporation
C/O Saddle Creek
743 Henrietta Creek Rd., Suite 100
Roanoke, TX 76262
(800) 297-1023, 8 a.m. to 4:30 p.m., Central, Monday through Friday
POP Mode is a trademark of MPH Industries, Inc.
Spectre I and Spectre IV are trademarks of Stealth Micro Systems Pty. Ltd.
VG2 is a trademark of TechniSonic Industries LTD.
- 11 -
- 12 -

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement