Acnodes APM5150 Front Bezel - Up to 20-inch User Manual
Add to my manuals
19 Pages
Acnodes APM5150 is an industrial 15" LCD monitor with a resolution of 1024x768 and a brightness of 250 cd/m2. It has a contrast ratio of 700:1 and a viewing angle of 75/75/75/60 (L/R/U/D). The monitor has a response time of 8ms and a dot pitch of 0.297mm. It is equipped with a VGA input and has a power consumption of 22W or less when the screen is on, 4W or less in power saving mode, and 1W or less when the power button is off. The monitor is designed for panel mount or VESA mount (100x100mm) and is suitable for use in industrial environments, such as in factories or warehouses.
advertisement
Industrial Monitors APM5150 15 ” 1 0 2 4 x 7 6 8 L C D M o n i t o r Aliminum Front Bezel Wall / VESA Mount Ready User Manual All rights reserved. Product description and product specifications are subject to change without notice. For lastest product information, please visit Acnodes’ website at www.acnodes.com 14628 Central Ave. Chino, CA91710 Tel: 909.597.7588 © Copyright 2015 Acnodes Corp. Fax: 909.597.1939 L eg al Inf orm ation F irst Eng Iish printing, O ctober 2002 Information in this doc ument has been carefu IIy checked for accuracy; however, no guarantee is given to the correctness of the contents. T he information in this docum ent is subject to change without notice. W e are not Iiab Ie for any injury or Ioss that resu Its from the use of this equipm ent. Safet y Instru ctions Please read all of th ese in structio ns carefully before yo u use th e d evice. Save this m anual for futu re reference. ● Unp Iug equipm ent before cIeaning. Don’t use Iiquid or spray detergent; use a moist cIoth. ● Keep equipm ent away from excessive humidity and heat. PreferabIy, keep it in an air-conditioned envir onment with temperatures not exceeding 40 º Ce Isius (104 º F ahrenheit). ● When insta IIing, pIace the equipment on a sturdy, Ieve I surface to prevent it from accidenta IIy fa IIing and causing dam age to other equipment or injur y to persons nearby. ● When the equipment is in an open position, do not cover, b Iock or in any way obstruct the gap between it and the power suppIy. Proper air convection is necessary to k eep it from overheating. ● Arrange the equipm ent’s power cord in such a way that others won’t trip or fa II over it . ● If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the vo Itage and cur rent Iabe Ied on the equipment’s eIectric aI ratings IabeI. T he vo Itage rating on the cord shou Id be higher than the one Iisted on the equipment’s ratings Iabe I. ● Observ e a II precautions and warnings attached to the equipment. ● If you don’t intend on using the equipment for a Iong time, disconnect it from the power outIet to prevent being dam aged by tr ansient over-voItage. ● Keep a II Iiquids away fr om the equipment to minimize the risk of accidenta I spiIIage. Liquid spiIIed on to the power suppIy or on other hardware may cause damage, fire or e Iectrica I shock. ● On Iy qua Iif ied service personne I shou Id open the chassis. O pening it yourseIf cou Id damage the equipm ent and inva Ii date its warranty. ● If any part of the equipment becomes damaged or stops functioning, have it c hecked by quaIified service personne I. W hat the w arran ty d oes not co ver ● Any product, on which the seriaI number has been defaced, modified or rem oved. ● Damage, deterioration or ma Ifunction resu Iting from: ● Accident, m isuse, neg Iect, f ire, water, Iightning, or other acts of nature, unauthorized product modification, or faiIure to fo IIow instructions supp Iied with the product. ● Repair or attempted repair by anyone not authorized by us. ● Any damage of the product due to shipment. ● RemovaI or ins taIIation of the product. ● Causes externa I to the product, such as e Iectric power f Iuctuation or faiIure. ● Use of supp Iies or parts not meeting our specifications. ● Norma I wear and tear. ● Any other causes which does not re Iate to a product defect. ● RemovaI, insta IIation, and s et-up service charges. Regulato ry Notices Federal Co mm un ications Com m ission (FCC) T his equipment has been tested and found to comp Iy with the Iimits for a CIass B digita I device, pursuant to Part 15 of the F CC ru Ies. These Iimits are designed to provide reasonabIe protection against harmfuI interference in a residentia I insta IIation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipm ent. This equipment generates, uses, and can radiate radio frequency energy and, if not instaIIed and used in accordance with the instructions, m ay cause harmfuI interference to radio communications. However, there is no guar antee that interference wiII not occur in a particu Iar instaIIation. I f this equipment does caus e harmfu I interference to radio or te Ievis ion reception, which c an be deter mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fo IIowing m easures: ● Re-pos ition or reIocate the receiving antenna. ● Increase the separation between the equipm ent and receiver. ● Connect the equipment into an outIet on a circuit different from that to which the receiver is connected. Contents < Part. 1 > APM 5150 1.1 1.2 1.3 Package Content Structure Diagram & Dimension Mounting Hardware & InstaIIation P.1 P.2 - 3 P.4 - 5 < Part. 2 > Specifications I OSD 2.1 2.2 Product Specifications On-screen DispIay Operation ( OSD ) P. 6 - 7 P. 8 < Part. 3 > Options 3.1 3.2 3.3 3.4 3.5 Option TabIe S-Video + BNC & Audio 15" Touchscreen : Resistive, Capacitive 48V, 24V or 12VDC power TV ( AnaIog ) P. 9 P.10 P.11 P.12 P.13 - 14 Before Installation ● It is very important to mount the equipment in a suitabIe cabinet or on a stabIe surface. ● Make sure the pIace has a good ventiIation, is out of direct sunIight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are incIuded and in good condition. If anything is missing, or damaged, contact the suppIier immediateIy. How To Clean Your LCD Monitor Caution : ● ● ● ● ● To avoid the r isk of eIectric shock, make sure your hands are dry before unpIugging your monitor from or pIugging your monitor into an eIectricaI outIet. When you cIean your monitor, do not press down on the LCD screen. Pressing down on the screen can scratch or damage your dispIay. Pressure damage is not covered under warranty. Use onIy cIeansers made specificaIIy for cIeaning monitors and monitor screens. CIeansers not made to cIean monitors and monitor screens can scratch the LCD dispIay or strip off the finish. Do not spray any kind of Iiquid directIy onto the screen or case of your monitor. Spraying Iiquids directIy onto the screen or case can cause damage which is not covered under warranty. Do not use paper toweIs or abrasive pads to cIean your monitor. Using an abrasive pad or any wood based paper product such as paper toweIs can scratch your LCD screen. Cleaning Your Monitor To cIean your LCD safeIy, pIease foIIow these steps : 1 Disconnect the power cord. 2 GentIy wipe the surface using a cIean, dry microfiber cIoth. Use as IittIe pressure as possibIe. Cleaning Tough Marks and Smudges To remove tough marks and smudges, pIease foIIow these steps : 1 Disconnect the power cord. 2 Spray a smaII amount of non-abrasive cIeanser on a microfiber cIoth. Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning. 3 GentIy wipe the surface. Use as IittIe pressure as possibIe. 4 Wait untiI your monitor is compIeteIy dry before pIugging it in and powering it up. < Part 1 > < 1.1 > Package Content – APM 5150 15" LCD Display APM 5150 15" LCD display X 1 6ft VGA cable X 1 Power adapter X 1 Power cord X 1 Mounting hardware X 1 pack - Mounting bracket x 2 pcs - M4* 6mm screw x 4 pcs - M4* 50mm screw x 4 pcs Standard IIO VGA Power AD2.2 upgrade IIO VGA Audio in - in - out PC Video - Options : S-Video + BNC, Audio, TV Power S-Video BNC < 1.2 > Structure Diagram - APM 5150 1 2 3 Front view 4 5 Rear view 1 Rear case 2 LCD paneI 3 Protective 3mm gIass 4 6mm aIuminum front bazeI 5 Audio speaker ( for Audio or TV option ) 6 LCD membrane Model APM5150 6 Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight 407 x 59 x 314 mm 16 x 2.3 x 12.3 inch 615 x 113 x 523 mm 25.6 x 4.9 x 23.5 inch 3.5 kg 7.7 Ibs 5.5 kg 12.1 Ibs < 1 .2 > Dim e nsion - APM 5 150 Front V iew 15 ” LC D D is play Side V iew Re ar View U N IT : m m 1 m m = 0 .03937 inc h Bottom View < 1.3 > Panel Mount Installation – APM 5150 1 2 Mounting bracket M4*6mm screw M4*50mm screw x 4 pcs x 2 pcs x 4 p cs 3 Hardware set part no. UV-BK#1 Steps ● ● InstaII 2 mounting brackets with 4 x M4*6mm screws Adjust the LCD paneI with 4 x M 4*50mm screws and fix it on the surface. < 1.3 > VESA mount Installation – APM 5150 15” LCD Display M4 screw VESA mount ( 10 0*100mm ) ¦ Hardware and M4*4 pcs for VESA m ount are not provided < Part 2 > < 2.1 > Product Specifications Mechanical Design APM 5150 Front PaneI BIack, RAL 9005 Rear Casing Dark grey, RAL 7037 VESA Mounting 100 x 100mm Other Mounting PaneI mount Protection LCD Panel 3mm protective gIass Manufacturer PaneI Size ( diagonaI ) 15-inch TFT coIor LCD DispIay pixeI ( dots x Iines ) 1024 x 768 Brightness ( typ. ) 250 Contrast Ratio ( typ. ) 700:1 CoIor 16.2 M Viewing AngIe ( L/R/U/D ) 75/75/75/60 Response Time ( ms ) 8 Dot pitch ( mm ) 0.297 DispIay Area ( mm ) Surface treatment Haze 25% Surface hardness 3H BackIight Type CCFL MTBF ( hrs ) 30,000 Video Connectivity AnaIog Power Power SuppIy Power Consumption Regulatory 304.12H x 228.09V Safety ApprovaI VGA AnaIog 0.7Vp- p Range Auto-sensing 100 to 240VAC, 50/60Hz Screen dispIay ON 22W or Iess Power saving mode 4W or Iess Power button OFF 1W or Iess FCC & CE Environmental Conditions Operating Storage Physical Specification Temperature 0 to 50°C degree Hum idity 20~90%, non-condensing Temperature -5 to 60°C degree Hum idity 5~90%, non-condensing Shock 10G acceIeration (11ms duration) Vibration 5~500Hz 1G RMS random Product ( W x D x H ) 407 x 59 x 314 mm 16 x 2.3 x 12.3 inch Packing ( W x D x H ) 615 x 113 x 523 mm 24.2 x 4.4 x 20.6 inch Applicable Format Net Weight 3.5 kgs / 7.7 Ibs Gross Weight 5.5 kgs / 12.1 Ibs VGA Input PC SignaI 1024 x 768 x 60 / 70 / 75Hz 848 x 480 x 60Hz 800 x 600 x 60 / 72 / 75Hz 720 x 400 x 70Hz 640 x 480 x 60 / 72 / 75Hz 640 x 400 x 70Hz 640 x 350 x 70Hz < 2.2 > On-screen Display Operation ( OSD ) Power Iight Green = On Orange = Power saving Membrane Switch Function Power on / off LCD DispIay the OSD menu ScroIIs through menu options and adjusts the dispIayed controI (To auto adjustment by pressing the button for 5 seconds) Exit the OSD screen ToggIe anaIog, digitaI & video connection (DVI-D and video options onIy) OSD Configuration Page Image: for the brightness, contrast, coIor temp, red, green, and bIue Geometry: for the auto adjust, H position, V position, phase and cIock Video: for the coIour, tint, sharpness, noise reduction, DCDi and TV Setup Audio: for voIume, bass, trebIe, baIance, AVL and mute Misc: for the Ianguage, OSD position, graphic mode, ratio, reset and timer < Part 3 > Options < 3.1 > Option Table Options APM S-Video + Composite ( BNC ) Audio Touchscreen DC Power TV (Ana Iog) * * ( 1 ) For TV option , this comes with RC-2 remote controller. PM < 3.2 > AD2.2 Upgrade Options : - S-Video + BNC - Audio VGA Audio Power S-Video BNC in - in - out PC Video AV option : S-Video + Composite (BNC) Audio option : 3.5mm audio jacks for audio in & out, and 2W + 2W speakers 15” LCD Display < 3.3 > Options : Touchscreen & driver 15" USB Touchscreen Specification Model TRB e-Resistive TCB e-Capacitive Technology 5-Wire Resistive Capacitive Method StyIus or Finger Finger = 50g / StyIus=R0.8 = 50g 35,000,000 times 300 miIIion touches 15 ms 20 ms 80% ± 3% 93% ±2% 3H 9H Haze 8% ± 3% 7% Glass 2.2 ±0.20 mm 2.8 mm ±10% Activation Force Durability Response Time Optical Transmittance Surface Hardness Connector USB Type A Compatibility ● ● ● Windows 7 / XP / Vista, Linux USB touchscreen package incIudes 1 x 6ft USB cabIe, quick reference guideIine and CD disc For detaiIed information, pIease refer to the attached CD disc As the touchscreen unit is not made of toughened gIass, pIease handIe it carefuIIy USB Touchscreen VGA Power Please follow the below steps to setup the touch screen:Step 1. Run the bundIed CD disc Step 2. DoubIe cIick the Setup.exe Step 3. FoIIow the instaIIation instruction to finish the setup Step 4. After instaIIation, run the TouchKit program & the “4 point caIibration” PIease do the initiaI caIibration after the first setup < 3.4 > Options : DC Power Model 12V 24V 48V Input voItage: 12-VoIt 24-VoIt 48-VoIt Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V - No Ioad 50 mA 50 mA 50 mA - FuII Ioad 4950 mA 2450 mA 1220 mA Output voItage: 12-VoIt 12-VoIt 12-VoIt Output current: 4 .16A 4.16A 4.16 A Efficiency 84% 85% 85% Input rating Input current Output rating 15” LCD Display < 3.5 > Options : TV ( Analog ) TV VGA Audio in - in - out PC Video *** For TV option : ( 1 ) 1 x RC-2 remote controller included. ( 2 ) Casing dimensions will be changed. Power S-Video BNC How to Use RC-2 Remote Controller 1 8 2 INP UT 3 4 MUTE 1 2 3 4 5 6 7 8 9 AUTO 0 -/-- VOL 9 CH 10 F REE ZE 11 12 ME NU 5 SE LECT AS P ECT 13 14 6 SLEEP ENTE R 15 16 7 BA CK EXIT PIP POS ITION AUDIO 17 PIP 20 S OURCE SWAP 18 PIP 21 19 r 1 INPUT SeIect the source Switches on or off the TV 2 3 0-9 OnIy use in TV mode. SeIect channeIs. For channeI numbers 10 and above, enter the second digit within two seconds. 4 AUTO MENU Auto adjust 5 6 ? / ? / ? / ? / ENTER 7 BACK MUTE Vol + I CH + I FREEZE - I -ASPECT SELECT SLEEP EXIT 8 9 10 11 12 13 14 15 16 17 18 19 20 21 PIP functions PIP PIP AUDIO POSITION SOURCE SWAP DispIay the menu on the screen or go to the previous menu Go to the upper menu or seIect the previous vaIue / Go to the next menu or seIect the next vaIue / Decrease the setting vaIue / Increase the setting vaIue or enter to the seIect item setting Enter to the seIect item settings or excude the setting Back to previous vaIue Turn on or off the speaker Increase or decrease the speaker voIume For TV modeI onIy, increase or decrease the channeI number Reserve for OEM modeI For setting input singIe or doubIe digits Adjust the screen size To seIect the existing item SeIect the sIeeping time Exit the menu or canceI Picture in picture To set the audio of in PIP mode To set the screen position in PIP mode PIP Source Swap screen in PIP mode
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement