Pentax Optio M50 Operating Manual

HOYA CORPORATION
PENTAX Imaging System Division
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe GmbH
(European Headquarters)
Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.uk)
PENTAX France S.A.S.
112 Quai de Bezons, B.P. 204, 95106 Argenteuil
Cedex, France
(http://www.pentax.fr)
PENTAX Italia S.r.l.
Via Dione Cassio 15, 20138 Milano, ITALY
(http://www.pentaxitalia.it)
PENTAX (Schweiz) AG
Widenholzstrasse 1, 8304 Wallisellen, Postfach 367,
8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Europe GmbH
(Tyskland) Filial Sverige
Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
Digital Camera
Operating Manual
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12000 Zuni Street, Suite 100B Westminster, Colorado
80234, U.S.A. (http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA (http://www.pentax.ca)
PENTAX Trading
(SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn)
http://www.pentax.jp/english
• Printed on recycled paper.
• Specifications and external dimensions are subject to change without notice.
53357
Copyright © HOYA CORPORATION 2008
H03-200803 Printed in Vietnam
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
Thank you for purchasing this PENTAX Digital Camera.
Please read this manual before using the camera in order to get the most
out of all the features and functions. Keep this manual safe, as it can be
a valuable tool in helping you to understand all the camera capabilities.
Regarding copyrights
Images taken using the PENTAX Digital Camera that are for anything other than
personal enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are cases where
limitations are placed on taking pictures even for personal enjoyment during
demonstrations, performances or of items on display. Images taken with the
purpose of obtaining copyrights also cannot be used outside the scope of use of
the copyright as laid out in the Copyright Act, and care should be taken here also.
To users of this camera
• There is a possibility that recorded data may be erased or that the camera may
not function correctly when used in surroundings such as installations
generating strong electromagnetic radiation or magnetic fields.
• The liquid crystal panel used in the display is manufactured using extremely
high precision technology. Although the level of functioning pixels is 99.99% or
better, you should be aware that 0.01% or fewer of the pixels may not illuminate
or may illuminate when they should not. However, this has no effect on the
recorded image.
• There is a possibility that the illustrations and the display screen in this manual
are different from the actual product.
• In this manual, both an SD Memory Card and an SDHC Memory Card are
referred to as SD Memory Cards hereafter.
Regarding trademarks
• PENTAX and Optio are trademarks of HOYA CORPORATION.
• SDHC logo (
) is trademark.
• This product supports PRINT Image Matching III. PRINT Image Matching
enabled digital still cameras, printers and software help photographers to
produce images more faithful to their intentions. Some functions are not
available on printers that are not PRINT Image Matching III compliant.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation. The PRINT
Image Matching logo is a trademark of Seiko Epson Corporation.
• All other brands or product names are trademarks or registered trademarks of
their respective companies.
Regarding PictBridge
PictBridge allows the user to connect the printer and digital camera directly, using
the unified standard for the direct printout of images. You can print images directly
from the camera through a few simple operations.
Regarding Product Registration
In order to serve you better, we request that you complete the product registration,
which can be found on the CD-ROM supplied with the camera or the PENTAX website.
Thank you for your cooperation.
Refer to the PC Connection Manual (bottom right of the front side) for more information.
USING YOUR CAMERA SAFELY
We have paid close attention to the safety of this product. When using
this product, we request your special attention regarding items marked
with the following symbols.
Warning This symbol indicates that violating this item could
cause serious personal injuries.
Caution This symbol indicates that violating this item could
cause minor or medium personal injuries, or material
losses.
About the Camera
Warning
• Do not attempt to take the camera apart or remodel the camera. High
voltages are present within the camera, and there is therefore a danger of
electric shocks if the camera is taken apart.
• If the inside of the camera should become exposed as a result of, for
example, the camera being dropped, please do not under any
circumstances touch such exposed portions, as there is a danger of
receiving an electric shock.
• To avoid the risk of it being swallowed by mistake, keep the SD Memory
Card out of the reach of small children. Seek medical attention immediately
if a card is accidentally swallowed.
• Wrapping the strap of the camera around your neck is also dangerous.
Please take care that small children do not hang the strap around their
necks.
• Use an AC adapter that is of the power and voltage specified for exclusive
use with this product. The use of an AC adapter other than that specified
exclusively for use with this product may cause fire or electric shocks.
• If the camera emits smoke or a strange smell, or in the event of any other
irregularity, stop using the camera immediately, remove the battery and
contact your nearest PENTAX Service Center. Continued use of the
camera may result in fire or electric shock.
1
Caution
• Do not charge any batteries other than rechargeable lithium-ion battery
D-LI78. The battery could explode or catch fire.
• Do not place your finger on the flash when it is discharging as there is a
risk of burns.
• Do not discharge the flash while it is touching your clothing as there is a
risk of discoloring.
• If any leakage from the battery should come in contact with your eyes, it
may cause a loss of sight. Flush your eyes with clean water and get
medical attention immediately. Do not rub them.
• If any leakage from the battery should come in contact with skin or clothes,
it may cause irritation to the skin. Wash the affected areas thoroughly with
water.
• Precautions for D-LI78 Battery Usage:
- USE SPECIFIED CHARGER ONLY.
- DO NOT INCINERATE.
- DO NOT DISASSEMBLE.
- DO NOT SHORT CIRCUIT.
- DO NOT EXPOSE TO HIGH TEMP. (140°F / 60°C)
• Remove the battery from the camera immediately if it becomes hot or
begins to smoke. Be careful not to burn yourself during removal.
• Some portions of the camera heat up during use, so please take care, as
there is a risk of low temperature burns if such portions are held for long
periods of time.
• Should the LCD be damaged, be careful of glass fragments. Also, be
careful not to allow the liquid crystal to get on your skin or in your eyes or
in your mouth.
• Depending on your inherent factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.
About the Battery Charger and the AC Adapter
Warning
• Do not use the product at a voltage other than the specified voltage. Use
with a power source or voltage other than that designed can cause a fire
or electrical shock. The specified voltage is 100-240V AC.
• Do not disassemble or modify the product. This can cause a fire or
electrical shock.
2
• If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical
shock.
• If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical
shock.
• If thunder storm should be present during use of the battery charger or AC
adapter, unplug the power cord and discontinue use. Continuing to use the
product can cause damage to the equipment, fire or electrical shock.
• Wipe off the plug of the power cord if it should become covered with dust.
This can cause a fire.
Caution
• Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
• Do not short or touch the output terminals of the product while it is still
plugged in.
• Do not plug in the AC plug cord with wet hands. This can cause an
electrical shock.
• Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
• Do not use the battery charger to charge batteries other than rechargeable
lithium-ion battery D-LI78. This can cause overheating or malfunctions.
• To reduce the risk of hazards, use only CSA/UL Certified power supply
cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper,
one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female
connector body (with a specified IEC nonindustrial type configuration) or
the equivalent.
3
Care to be Taken During Handling
• When traveling, take the Worldwide Service Network listing that is included
in the package. This will be useful if you experience problems abroad.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or during traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.
• The lens on this camera is not interchangeable. The lens is not removable.
• Do not clean the product with organic solvents such as thinner, alcohol or
benzene.
• Places of high temperature and humidity should be avoided. Particular
care should be taken regarding vehicles, which can become very hot
inside.
• This camera is not waterproof. Do not use this camera where it might come
in contact with rain, water, or any other liquid.
• Storing the camera where pesticides and chemicals are handled should be
avoided. Remove the camera from its case and store in a well-ventilated
place to prevent the camera from becoming moldy during storage.
• Ensure that the camera is not subjected to substantial vibrations, shocks
or pressure as this may cause damage or malfunction. Place the camera
on a cushion for protection when the camera is subjected to the vibrations
of a motorbike, car, ship, etc. If the camera is subjected to substantial
vibrations, shocks or pressure, take your camera to your nearest PENTAX
Service Center and have it checked.
• The temperature range in which the camera can be used is 0°C to 40°C
(32°F to 104°F).
• The liquid crystal display will become black at a high temperature but will
return to normal when normal temperatures are returned to.
• The response speed of the liquid crystal display becomes slow at low
temperatures. This is due to the properties of the liquid crystal and is not
a fault.
• Periodic checks are recommended every 1 to 2 years in order to maintain
high performance.
4
• If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera. Therefore put the
camera in a bag or plastic bag, and take the camera out when the
difference in temperature has subsided.
• Refer to “Precautions When Using an SD Memory Card” (p.30) regarding
the SD Memory Card.
• Please note that formatting an SD Memory Card or built-in memory will
delete all data; however it may still be possible to recover that data using
off-the-shelf data recovery software. Please manage your camera memory
at your own risk.
• Please do not press forcefully on the display. This could cause breakage
or malfunction.
• Be careful not to sit down with the camera in your back pocket as this may
damage the exterior of the camera or the display.
• When using a tripod with the camera, be careful not to overtighten
the screw in the tripod socket on the camera.
• The AC plug cord supplied with the camera is for exclusive use with the
battery charger D-BC78. Do not use it with any other equipment.
• Storing the battery fully charged may decrease the battery performance.
Avoid storing it especially in high temperatures.
If the battery is left inserted and the camera is not used for a long time, the
battery will over-discharge and shorten the battery’s service life.
• Charging the battery a day before use or on the day of use is
recommended.
5
Contents
USING YOUR CAMERA SAFELY....................................................1
Care to be Taken During Handling ...................................................4
Contents ...........................................................................................6
Composition of the Operating Manual ............................................ 11
Camera Features................................................................................. 12
Checking the Contents of the Package .......................................... 15
Names of Parts............................................................................... 16
Names of Operating Parts .............................................................. 17
Monitor Indications ......................................................................... 18
Getting Started
21
Attaching the Strap............................................................................. 21
Powering the Camera ......................................................................... 22
Charging the Battery....................................................................... 22
Installing the Battery ....................................................................... 23
Using the AC Adapter..................................................................... 26
Installing the SD Memory Card.......................................................... 28
Recorded Pixels and Quality Level of Still Pictures........................31
Recorded Pixels, Quality Level and Frame Rate of Movies ...........32
Turning the Camera On and Off ........................................................ 34
Playback Mode ............................................................................... 35
Initial Settings .....................................................................................36
Setting the Display Language.........................................................36
Setting the Date and Time.............................................................. 38
Quick Start
40
Taking Still Pictures............................................................................40
Playing Back Still Pictures................................................................. 42
Playing Back Images ......................................................................42
Playing Back the Previous or Next Image ...................................... 42
Rotating the Displayed Image ........................................................ 43
Common Operations
44
Understanding the Button Functions ...............................................44
A Mode .........................................................................................44
Q Mode ........................................................................................ 46
Setting the Camera Functions ........................................................... 48
Setting with the Menus ................................................................... 48
Menu List ........................................................................................ 51
Setting the Shooting Mode ............................................................. 53
6
Setting the Face Recognition function............................................ 56
Calling Up a Specific Menu ............................................................ 57
Using the Playback Function .......................................................... 59
Taking Pictures
61
Taking Pictures ................................................................................... 61
Taking Pictures Automatically (Auto Picture Mode) ....................... 61
Setting The Functions (Program Mode) ......................................... 62
Taking Pictures in the Basic Mode (Green Mode)..........................63
Taking Pictures of Dark Scenes
(Night Scene/Digital SR (Blur Reduction) Mode)............................65
Framing Your Pictures (Frame Composite) ....................................66
Taking Pictures of People (Natural Skin Tone/Portrait Mode)........ 68
Taking Pictures of Your Pet (Pet Mode) ......................................... 70
Taking Pictures of Children (Kids Mode) ........................................ 72
Taking Panoramic Pictures (Digital Panorama Mode).................... 74
Using the Self-timer ........................................................................76
Taking a Series of Pictures (Continuous Shooting Mode).............. 77
Using the Zoom ..............................................................................78
Using the Digital Wide Function (Digital Wide Mode)..................... 81
Setting the Exposure (EV Compensation)...................................... 84
Displaying Shooting Information in Capture Mode ......................... 85
Setting the Shooting Functions.........................................................87
Selecting the Focus Mode .............................................................. 87
Selecting the Flash Mode ............................................................... 89
Selecting the Recorded Pixels........................................................ 91
Selecting the Quality Level ............................................................. 93
Adjusting the White Balance........................................................... 94
Setting the AE Metering..................................................................96
Setting the Sensitivity ..................................................................... 98
Setting the Autofocus Conditions .................................................100
Setting the Instant Review Time (Instant Review)........................101
Setting the Image Sharpness (Sharpness)................................... 102
Setting the Color Saturation (Saturation)...................................... 103
Setting the Image Contrast (Contrast).......................................... 104
Setting the Date Imprint Function .................................................105
Saving the Settings (Memory) ......................................................... 106
Recording Movies ............................................................................. 108
Recording a Movie........................................................................108
Selecting the Recorded Pixels for Movies .................................... 110
Selecting the Quality Level of Movies...........................................111
Selecting the Frame Rate............................................................. 112
Recording Movies in Black and White or Sepia Tones
(Color Mode)................................................................................. 113
7
Setting the Movie SR (Movie Shake Reduction) Function............ 114
Playing Back and Deleting Images
115
Playing Back Images ........................................................................115
Switching Between A Mode and Q Mode................................. 115
Playing Back Still Pictures ............................................................ 115
Nine-Image Display, Folder Display and Calendar Display.......... 116
Zoom Playback............................................................................. 118
Zoom Up On the Subject’s Face Automatically
(Face Close-up Playback) ............................................................ 119
Displaying Shooting Information in Playback Mode ..................... 121
Correcting Camera Shake with Digital SR.................................... 122
Slideshow .....................................................................................123
Playing Back Movies ........................................................................125
Playing Back a Movie ................................................................... 125
Connecting the Camera to AV Equipment...................................... 126
Deleting Images ................................................................................ 128
Deleting a Single Image/Sound File .............................................128
Deleting Selected Images and Sound Files
(from Nine-Image Display)............................................................ 130
Deleting All Images and Sound Files............................................ 132
Recovering Deleted Images ......................................................... 133
Protecting Images and Sound Files from Deletion (Protect) ........ 134
Editing and Printing Images
136
Editing Images .................................................................................. 136
Changing the Image Size and Quality (Resize)............................136
Cropping Images ..........................................................................138
Copying Images and Sound Files.................................................139
Using the Digital Filters................................................................. 141
Red-eye Compensation................................................................144
Adding a Frame (Frame Composite) ............................................ 145
Editing Movies .............................................................................. 147
Setting the Printing Service (DPOF)................................................ 149
Printing Single Images..................................................................149
Printing All Images........................................................................151
Printing Using PictBridge ................................................................152
Connecting the Camera to the Printer .......................................... 152
Printing Single Images..................................................................153
Printing All Images........................................................................155
Printing Using the DPOF Settings ................................................ 156
Disconnecting the Cable from the Printer..................................... 156
8
Recording and Playing Back Sound
157
Recording Sound (Voice Recording Mode).................................... 157
Playing Back Sound ......................................................................... 159
Adding a Voice Memo to Images.....................................................160
Recording a Voice Memo ............................................................. 160
Playing Back a Voice Memo......................................................... 161
Settings
162
Camera Settings................................................................................ 162
Formatting an SD Memory Card or the Built-in Memory .............. 162
Changing the Sound Settings.......................................................163
Changing the Date and Time........................................................ 165
Setting the World Time ................................................................. 167
Changing the Display Language .................................................. 169
Changing the Image Folder Name ...............................................170
Changing the USB Connection Mode...........................................171
Changing the Video Output Format.............................................. 172
Adjusting the Brightness of the Display ........................................ 173
Using the Power Saving Function ................................................ 174
Setting Auto Power Off ................................................................. 175
Setting the Quick Zoom Function .................................................176
Setting the Guide Display ............................................................. 177
Resetting to Default Settings (Reset) ...........................................178
Changing the Start-up Screen ...................................................... 179
Appendix
180
List of World Time Cities..................................................................180
Default Settings................................................................................. 181
Functions Available for Each Shooting Mode................................186
Optional Accessories ....................................................................... 188
Messages...........................................................................................189
Troubleshooting................................................................................ 192
Main Specifications ..........................................................................194
WARRANTY POLICY......................................................................... 198
Index................................................................................................... 204
9
In this manual, the method for operating the four-way controller is shown
in illustrations, such as in the one below.
2or
4or
5or
3or
The meanings of the symbols used in this Operating Manual are
explained below.
1
indicates the reference page number for an explanation of the
related operation.
indicates information that is useful to know.
indicates precautions to be taken when operating the camera.
10
A mode
This is the mode for capturing still pictures and recording movies
and sound files. In this manual, the mode for taking still pictures
is referred to as the “Still Picture Capture Mode”, the mode for
recording movies is referred to as the “C mode” and the mode for
recording sound files is referred to as the “O mode”.
Q mode
This is the mode for viewing still pictures and playing back movies
and sound files.
Composition of the Operating Manual
This Operating Manual contains the following chapters.
1 Getting Started –––––––––––––––––––––––––––––––––––––––––
This chapter explains what you need to do after purchasing the camera
before you start taking pictures. Be sure to read it and follow the
instructions.
2 Quick Start ––––––––––––––––––––––––––––––––––––––––––––
This chapter explains the simplest way to take pictures and play back
images. Use it if you want to start taking pictures or playing back images
straightaway.
1
2
3
3 Common Operations ––––––––––––––––––––––––––––––––––––
This chapter explains common operations such as the functions of the
buttons and how to use the menus. For more details, refer to the respective
chapters below.
4
4 Taking Pictures ––––––––––––––––––––––––––––––––––––––––
5
This chapter explains the various ways of capturing images and how to set
the relevant functions.
5 Playing Back and Deleting Images–––––––––––––––––––––––––
This chapter explains how to view still pictures and movies on the camera
or on a TV and how to delete images from the camera.
6 Editing and Printing Images ––––––––––––––––––––––––––––––
This chapter explains the various ways of printing still pictures and how to
edit images with the camera. For information on transferring images to a PC
and installing the provided software, see the supplied “PC Connection
Manual”. For details on editing and printing images on a PC, see the Help
menu of the software.
7 Recording and Playing Back Sound –––––––––––––––––––––––
6
7
8
9
This chapter explains how to record sound files or add sound (a voice
memo) to an image, and how to play back sound files.
8 Settings –––––––––––––––––––––––––––––––––––––––––––––––
This chapter explains how to set the camera-related functions.
9 Appendix––––––––––––––––––––––––––––––––––––––––––––––
This section deals with troubleshooting and lists the optional accessories.
11
Camera Features
In addition to basic picture-taking, the Optio M50 has a variety of shooting
modes to suit different situations. This section describes how to make the
most of the key features of your camera. Together with the explanations
of camera operations, it will enable you to enjoy your camera to the full.
Advanced Movie Recording and Picture Taking
Functions
The Optio M50 has a shake reduction function to reduce camera shake
during movie recording. (p.114)
For recording the action of sporting events as a movie
while capturing the winning shot in a picture.
Add Fun Frames to Your Pictures!
With the Optio M50, you can add a fun
frame when taking a picture of a child
or a pet, for example. (p.66) You can
also add frames to pictures you have
taken. Adjust the position of the subject
in the picture or reduce or enlarge the
picture size to match the frame shape
and size. Now you no longer have to
worry about the subject not being
aligned in the frame. (p.145)
For decorating your pictures
with a frame.
12
Easy-to-Navigate Capture and Playback
Functions!
The user-friendly design of the Optio M50 enables easy operation with
only a few buttons. Simply by choosing the appropriate icon, you can
select the shooting mode (p.53) and choose the optimal settings for the
situation, or the playback mode (p.115, p.136) and enjoy the various
playback and editing functions. A guide on the display lets you check the
functions available in each mode and how to use them. (p.53, p.59)
A shooting mode guide is displayed in the Capture Mode
Palette and a playback mode guide in the Playback Mode
Palette for a few seconds after each mode is selected.
(p.53, p.59)
Use the Green Mode to take pictures easily using
standard settings. (p.63)
Display Images and Sound Files in Calendar
Format!
With the Optio M50, you can display recorded images and sound files by
date in calendar format. (p.117) This lets you quickly find the image or
sound file you want to play back.
13
A multitude of functions inside the camera for
enjoying images without a PC!
The Optio M50 has a variety of
functions to let you enjoy playing
back and editing images without
having to connect the camera to
your computer and transfer the
images first. The camera is all you
need to take and edit still pictures
and movies. (p.136) And no more
worries about accidentally
deleting images, because now,
with the Optio M50, you can
recover them again. (p.133)
Resize (p.136) , Cropping (p.138) , and Red-eye
Compensation (p.144) can be used, while the image is
displayed in Playback mode.
You can divide a movie into two or select a frame from a
movie to save it as a still picture. (p.147)
You can stitch multiple images on the camera to create
Panorama (p.74) and Digital Wide (p.81) pictures.
14
Checking the Contents of the Package
Camera
Optio M50
Strap
O-ST51 (*)
Software (CD-ROM)
S-SW77
USB cable
I-USB7 (*)
AV cable
I-AVC7 (*)
Rechargeable lithium-ion
battery D-LI78(*)
Battery charger
D-BC78 (*)
AC plug cord (*)
PC Connection Manual
Operating Manual
(this manual)
Quick Guide
Items marked with an asterisk (*) are also available as optional accessories.
The battery charger and AC plug cord are only sold as a set (Battery Charger Kit
K-BC78).
For other optional accessories, refer to “Optional Accessories” (p.188).
15
Names of Parts
Front
Self timer lamp
Flash
Lens
Microphone
Tripod socket
Speaker
Battery/Card cover
Back
Display
Power switch
Shutter release button
PC/AV terminal
Terminal cover
16
Names of Operating Parts
Power switch
Shutter release button
I button
Zoom/w/x/f/y button
Q button
Four-way controller
4/W button
Green/i button
3 button
Refer to “Understanding the Button Functions” (p.44 - p.47) for an
explanation of the function of each button.
17
Monitor Indications
Normal Display in Still Picture Capture Mode
The display shows information such as the shooting conditions. (p.85)
6
38
1
2
3
4
5
16
17
7
8
9
10
11
12
1/250
F3.5
+1.0
02/02/2008
14:25
13
14
15
Shooting mode (p.53)
Face Priority icon (p.56)
Flash mode (p.89)
Drive mode (p.76, p.77)
Camera shake warning (p.85)
Focus mode (p.87)
Digital zoom icon (p.78)
Intelligent zoom icon (p.78)
8 Memory status (p.34)
+ : Built-in memory
(without card)
a : SD Memory Card
r : Card is write-protected
1
2
3
4
5
6
7
9 Remaining image storage
capacity
10 Battery level indicator (p.25)
11 Focus frame (p.40)
12 EV compensation (p.84)
13 Date and time (p.38)
14 World time setting (p.167)
15 Date Imprint setting (p.105)
16 Shutter speed
17 Aperture
* 5, 16 and 17 appear only when the shutter release button is pressed
halfway.
* Some indications may not appear depending on the shooting mode.
18
Histogram + Info Display in Still Picture Capture Mode
38
8M
1
2
3
4
5
1
2
3
4
5
6
200
1/250
F3.5
+1.0+1.0
Bright portion (blinks red)
Dark portion (blinks yellow)
Camera shake warning (p.85)
Shutter speed
Aperture
Recorded pixels (p.91)
7
8
9
10
11
6
7
8
9
10
11
Quality (p.93)
White balance (p.94)
AE Metering (p.96)
Sensitivity (p.98)
Histogram (p.86)
* 3, 4 and 5 appear only when the shutter release button is pressed
halfway.
* Some indications may not appear depending on the shooting mode.
About the Bright and Dark Portions
When there is an area in the frame that is so bright it appears white, the
indicated area blinks red as a warning. Similarly, when there is an area
that is so dark it appears black, the indicated area blinks yellow as a
warning.
19
Full Display in Still Picture Playback Mode
(All of the display items are displayed here for explanatory purposes.)
The display shows information such as the shooting conditions. A1 to
A12 appear when [Normal Display] or [Histogram + Info] is selected. B1
to B10 only appear when [Histogram + Info] is selected. (p.121)
A12
A1
B1
B2
B3
B4
B5
B6
B7
B8
B9
A11
100 - 0038
8M
A2
A3
A4
A5
A6
A7
A8
B10
200
1/250
F3.5
02/02/2008
14:25
A9
A10
A1 Playback mode
A9 Captured date and time (p.38)
w : Still Picture Playback
A10 Four-way controller guide
Mode (p.59)
A11 Key lock icon (p.64)
P : Digital SR (p.122)
A12 Face Priority icon (p.56)
A2 Folder number (p.170)
B1 Bright portion (blinks red) (p.19)
A3 File number
B2 Recorded pixels (p.91)
A4 Protect icon (p.134)
B3 Quality (p.93)
A5 Voice memo icon (p.161)
B4 White balance (p.94)
A6 Battery level indicator (p.25)
B5 AE Metering (p.96)
A7 Volume icon
B6 Sensitivity (p.98)
A8 Memory status (p.34)
B7 Dark portion (blinks yellow) (p.19)
+ : Built-in memory (without card)B8 Shutter speed
a : SD Memory Card
B9 Aperture
r : Card is write-protected
B10 Histogram (p.86)
In Normal Display, A6 and A9 disappear if no operation is performed for two seconds.
Guide Indications
A guide to available button operations appears on the display during operation.
The buttons are indicated as shown below.
Four-way controller (2)
Four-way controller (3)
Four-way controller (4)
Four-way controller (5)
3 button
20
2
3
4
5
MENU
Zoom button
4/W button
Shutter release button
SHUTTER
Green/i button
I button
X, i
I, J
OK
Getting Started
Attaching the Strap
Attach the strap (O-ST51) supplied with the camera.
Getting Started
1
1
2
1
2
Pass the narrow end of the strap through the strap lug.
Pass the other end of the strap through the loop and
pull tight.
21
Powering the Camera
Charging indicator
While charging: Lights
Charging finished: Turns off
1
Getting Started
2
To power
outlet
3
AC plug cord
Battery
Battery charger
1
Charging the Battery
Use the battery charger to charge the battery before using it in the
camera for the first time or after a long period of non-use, or when the
[Battery depleted] message appears.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord,
rated 125 V, 7A, minimum 6ft (1.8m)”
1
2
3
4
Connect the AC plug cord to the battery charger D-BC78.
Plug the AC plug cord into the power outlet.
Place the battery in the charger so that the PENTAX
logo is facing up.
The charging indicator lights while the battery is charging and turns off
when charging is finished.
Remove the battery from the battery charger when
charging is finished.
• The time required to fully charge the battery is about 150 minutes (max.). The
appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F
to 104°F). (The charging time may vary depending on the ambient
temperature and charging conditions.)
• The battery has reached the end of its service life when it starts to run down
soon after being charged. Replace with a new battery.
• Do not use the battery charger to charge batteries other than the rechargeable
lithium-ion battery D-LI78, as the charger may overheat or be damaged.
• If the battery is inserted correctly but the charging indicator fails to light, the
battery may be faulty. Replace with a new battery.
22
1
Getting Started
Battery/card cover lock lever
Battery/Card
cover
Battery
Installing the Battery
Use the battery that is provided with the camera. Charge the battery
before using it in the camera for the first time.
1
Open the battery/card cover.
2
Using the side of the battery to press the battery/card
cover lock lever in the direction of 3, insert the battery
with the PENTAX logo pointing toward the lens.
Move the battery/card cover lock lever to the OPEN position 1 and
open the battery/card cover 2.
Push the battery in until it is locked in place.
Make sure that the battery is inserted with the PENTAX logo pointing
toward the lens. If the battery is incorrectly oriented, malfunction
may result.
3
Close the battery/card cover.
Close the battery/card cover and move the battery/card cover lock
lever to the LOCK position.
23
Removing the Battery
1
1
2
Open the battery/card cover.
Press the battery/card cover lock lever in the direction of
3 to release the battery.
Getting Started
The battery will be ejected. Pull the battery out of the camera.
• This camera uses a rechargeable lithium-ion battery D-LI78. Use
of any other type of battery may damage the camera and cause
malfunction.
• Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
• Do not remove the battery while the camera is turned on.
• When storing the battery for more than 6 months, charge the
battery for 30 minutes using the battery charger and store the
battery separately.
Be sure to recharge the battery every 6 to 12 months. Storing the
battery below room temperature is ideal. Avoid storing it in high
temperatures.
• The date and time may be returned to the default setting if the
camera is left without the battery for a long time.
• Be careful as the camera or the battery may become hot when the
camera is used continuously for a long period of time.
• Image Storage Capacity, Movie Recording Time, Sound
Recording Time, and Playback Time
(at 23°C with the display on and the battery fully charged)
Image Storage
Capacity*1
(flash used for 50%
of shots)
Approx. 210
pictures
Movie Recording
Time*2
Sound Recording
Time*2
Playback Time*2
Approx. 70 min.
Approx. 300 min.
Approx. 240 min.
*1: Recording capacity shows approximate number of shots recorded during
CIPA-compliant testing (with display on, flash used for 50% of the shots,
and 23 degrees centigrade). Actual performance may vary according to
operating conditions.
*2: According to the result of in-house testing.
24
• In general, battery performance may temporarily deteriorate as
the temperature decreases.
• Be sure to take a spare battery with you when traveling abroad or
to a cold region, or if you intend to take a lot of pictures.
Screen Display
(green)
(green)
(yellow)
(red)
[Battery depleted]
indicator on the display.
Battery Status
Adequate power remains.
Battery is running low.
Battery is running very low.
Battery is exhausted.
The camera will turn off after this message appears.
Getting Started
• Battery Level Indicator
You can check the battery level by the
1
25
AC plug cord
1
1
4
Getting Started
8
3
7
DC coupler
AC adapter
6
DC terminal
Using the AC Adapter
Use of the AC adapter kit K-AC78 (optional) is recommended if you
intend to use the camera for a long time or connect it to a PC.
1
2
Make sure that the camera is turned off and open the
battery/card cover.
Remove the Battery.
3
Insert the DC coupler.
Refer to p.23 - p.24 on how to open/close the battery/card cover and
remove the battery.
Using the side of the DC coupler to press the battery/card cover lock
lever, insert the DC coupler. Confirm the DC coupler is locked in place.
4
Extract the DC coupler cord.
Pull out the tab at the joint of the camera and the battery/card cover so
that the DC coupler cord extracts from there.
5
6
7
8
26
Close the battery/card cover.
Connect the DC terminal of the AC adapter to the DC
terminal of the DC coupler.
Connect the AC plug cord to the AC adapter.
Plug the AC plug cord into the power outlet.
1
Getting Started
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that the AC plug cord and the power cord connecting
the AC adapter to the camera are inserted securely. The data may
be lost if either becomes disconnected while data is being
recorded on the SD Memory Card or the built-in memory.
• Use the AC adapter with due care to avoid fire or electric shock.
Be sure to read “USING YOUR CAMERA SAFELY” (p.1) and
“About the Battery Charger and the AC Adapter” (p.2) before using
the AC adapter.
• Be sure to read the operation manual accompanying the AC
adapter kit K-AC78 before using the adapter.
• When connecting the AC adapter, you cannot set the camera
upright on the table because the cord from the DC coupler is
extracted from the bottom side of the camera. Additionally, do not
place the camera with the lens facing down because the lens
extends when the camera turns on. Hold the camera in your hand
or use a tripod when using the AC adapter and confirming the
display to take pictures, view pictures or adjust the camera
settings.
27
Installing the SD Memory Card
1
Getting Started
Battery/Card cover
SD Memory Card socket
SD Memory Card
This camera uses an SD Memory Card. Captured images and sound files
are saved on the SD Memory Card if a card is inserted in the camera. They
are saved in the built-in memory if a card is not inserted. (p.34)
• Be sure to use this camera to format (initialize) an SD Memory
Card that is unused or has been used on other cameras or
digital devices. Refer to “Formatting an SD Memory Card or
the Built-in Memory” (p.162) for instructions on formatting.
• Make sure that the camera is turned off before inserting or
removing the SD Memory Card.
• The still picture storage capacity varies depending on the capacity
of the SD Memory Card and the selected number of recorded
pixels and quality level. (p.31)
• The self-timer lamp blinks while the SD Memory Card is being
accessed (data is being recorded or read).
Backing Up Data
The camera may not be able to access data in the built-in memory in the case
of a malfunction. Use a computer or other device to back up important data in
another location.
28
1
Open the battery/card cover.
Move the battery/card cover lock lever to the OPEN position 1 and
open the battery/card cover 2.
2
Push the card in all the way. Images and sound may not be recorded
correctly if the card is not inserted all the way.
3
Close the battery/card cover.
Close the battery/card cover and move the battery/card cover lock
lever to the LOCK position.
1
Getting Started
Insert the SD Memory Card into the SD Memory Card
socket so that the label is facing toward the front of the
camera (the side with the lens).
Removing the SD Memory Card
1
2
Open the battery/card cover.
Push the card into the SD Memory Card socket to eject
it.
Pull the card out.
29
Precautions When Using an SD Memory Card
1
Getting Started
30
• The SD Memory Card is equipped with a
write-protect switch. Setting the switch to
LOCK protects the existing data by
prohibiting recording of new data, deletion
Write-protect
of existing data or formatting of the card.
r appears on the display when the card is
switch
write-protected.
• Care should be taken when removing the SD Memory Card immediately after
using the camera, as the card may be hot.
• Do not remove the SD Memory Card or turn the camera off while data is
being saved to the card, images or sound files are being played back, or the
camera is connected to a computer with the USB cable, as this may cause
the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact. Keep it away
from water and store away from high temperature.
• Do not remove the SD Memory Card during formatting as this may damage the
card and render it unusable.
• The data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that is deleted
(1) when the SD Memory Card is mishandled by the user.
(2) when the SD Memory Card is exposed to static electricity or electrical
interference.
(3) when the card has not been used for a long time.
(4) when the card is ejected or the battery is removed while the data on the
card is being recorded or accessed.
• If it is not used for a long time, the data on the card may become unreadable.
Be sure to regularly make a backup of important data on a computer.
• Avoid using or storing the card where it may be exposed to static electricity or
electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed
to rapid changes in temperature or to condensation.
• When using an SD Memory Card with a slow recording speed, recording may
stop while you are taking movies even when there is adequate space in the
memory, or shooting and playback may take a long time.
• For information on compatible SD Memory Cards, visit the PENTAX website.
• Be sure to format an SD Memory Card that is unused or has been used on
another camera. Refer to “Formatting an SD Memory Card or the Built-in
Memory”. (p.162)
• Please note that formatting the SD Memory Card will not necessarily delete the
data so that it cannot be recovered using off-the-shelf data recovery software.
There are off-the-shelf secure data deletion software programs available that will
completely delete the data. If you are going to discard, give away or sell your SD
Memory Card, you should ensure that the data on the card is completely deleted
or the card itself is destroyed if it contains any personal or sensitive information. In
any case, the data on your SD Memory Card should be managed at your own risk.
Recorded Pixels and Quality Level of Still Pictures
Recorded Pixels
Use
E 3264×2448
For printing high quality photos or A4-size pictures, or
editing images on a PC.
h 2048×1536
i 1600×1200
l 1024× 768
m
640× 480
Clearer
f 2592×1944
g 2304×1728
1
Getting Started
Choose the number of pixels (size) and quality level (data compression
rate) of still pictures according to how you intend to use the pictures you
have taken.
Higher quality levels and numbers of pixels produce clearer images, but
the resulting increase in data volume reduces the total number of
pictures that can be taken (stored in the camera’s built-in memory or on
the SD Memory Card).
The quality of the captured photo or printed picture also depends on the
quality level, exposure compensation, resolution of the printer and a
variety of other factors, so you do not need to select more than the
required number of pixels. As a rough guide, i (1600×1200) is
adequate for making postcard-size prints. Refer to the table below for the
appropriate settings according to use.
Appropriate Number of Recorded Pixels According to Use
For making postcard-size prints.
For posting on a website or attaching to e-mail.
The default setting is E (3264×2448).
Appropriate Quality Level According to Use
C
Best
D
Better
E
Good
Lowest compression rate. Suitable for photo prints.
Standard compression rate. Suitable for viewing the image
on a computer screen.
Highest compression rate. Suitable for posting on a website
or attaching to e-mail.
The default setting is D (Better).
31
Choose the appropriate number of recorded pixels and quality level for
still pictures on the [A Rec.Mode] menu.
Selecting the Recorded Pixels 1p.91
1
Selecting the Quality Level 1p.93
Getting Started
Recorded Pixels, Quality Level and Image Storage Capacity
(Approximate numbers of pictures)
E 3264×2448
f 2592×1944
g 2304×1728
h 2048×1536
i 1600×1200
l 1024× 768
m 640× 480
C (Best)
D (Better)
Built-in
Built-in
512 MB
512 MB
Memory
Memory
13 pictures 121 pictures 25 pictures 232 pictures
20 pictures 188 pictures 38 pictures 355 pictures
25 pictures 236 pictures 49 pictures 457 pictures
31 pictures 293 pictures 61 pictures 570 pictures
51 pictures 472 pictures 83 pictures 774 pictures
96 pictures 888 pictures 155 pictures 1439 pictures
192 pictures 1777 pictures 297 pictures 2747 pictures
E (Good)
Built-in
512 MB
Memory
38 pictures 351 pictures
54 pictures 503 pictures
69 pictures 643 pictures
88 pictures 816 pictures
121 pictures 1119 pictures
192 pictures 1777 pictures
363 pictures 3358 pictures
• The above figures may vary depending on the subject, shooting conditions,
shooting mode and SD Memory Card, etc.
Recorded Pixels, Quality Level and Frame Rate of
Movies
Choose the recorded pixels, quality level and frame rate (number of
frames per second) according to how you intend to use the movies you
have taken.
The higher the number of recorded pixels and quality level, the clearer
the details, but the bigger the file size.
The more frames per second, the better the quality of the movie, but the
bigger the file size.
Choose the appropriate number of recorded pixels, quality level and
frame rate in [Movie] on the [A Rec.Mode] menu.
Selecting the Recorded Pixels for Movies 1p.110
Selecting the Quality Level of Movies 1p.111
Selecting the Frame Rate 1p.112
32
Appropriate Number of Recorded Pixels According to Use
m
(640×480)
Suitable for viewing on a TV or computer screen.
D
(320×240)
Suitable for posting on a website or attaching to e-mail.
1
Getting Started
The default setting is m (640×480).
Appropriate Quality Level According to Use
C
Best
D
Better
E
Good
Clearer images
Grainier images
The default setting is C (Best).
Appropriate Frame Rate According to Use
30fps
15fps
Produces high quality movies, but reduces the total recording time.
Increases the total recording time because the file size is smaller.
The default setting is 30fps (frames per second).
Recorded Pixels, Quality Level, Frame Rate and Recording Time
(Approximate recording time)
30fps
Built-in
512 MB
Memory
7 min.
C 48 sec.
31 sec.
m
1 min.
10 min.
D
640×480
5 sec.
4 sec.
1 min.
15 min.
E
39 sec.
15 sec.
1 min.
11 min.
C
17 sec.
59 sec.
D
1 min.
16 min.
D
320×240
45 sec.
14 sec.
2 min.
22 min.
E
28 sec.
53 sec.
15fps
Built-in
512 MB
Memory
1 min.
14 min.
36 sec.
48 sec.
2 min.
20 min.
10 sec.
8 sec.
3 min.
29 min.
12 sec.
37 sec.
2 min.
22 min.
28 sec.
53 sec.
3 min.
31 min.
24 sec.
28 sec.
4 min.
45 min.
57 sec.
47 sec.
Sound
Built-in
512 MB
Memory
40 min.
30 sec.
6 hr.
14 min.
15 sec.
• The above figures are based on our standard shooting conditions and may vary
depending on the subject, shooting conditions and type of SD Memory Card used.
• Recording can continue until the built-in memory/SD Memory Card is full, or the size of
the recorded movie reaches 2 GB (when using an SDHC card). If recording stops at 2
GB, start recording again to continue to record the rest of the movie in blocks of 2 GB.
33
Turning the Camera On and Off
Power switch
1
Getting Started
1
Press the power switch.
The camera turns on and the display turns on.
When you turn the camera on, the lens cover opens and the lens
extends.
If the Language Selection screen or Date Adjust screen appears when
you turn the camera on, follow the procedure on p.36 to set the display
language and/or current date and time.
2
Press the power switch again.
The display turns off, the lens closes, and the camera turns off.
Taking Pictures 1p.61
Checking the Memory Card
The memory card is checked automatically
when the camera turns on. + appears on the
display when there is no SD Memory Card
inserted in the camera. In this case, images
and sound files will be saved in the built-in
memory.
r appears instead of a when the write-protect
switch on the SD Memory Card is in the locked
position. Images and sound cannot be
recorded when the write-protect switch is locked.
34
Memory status
38
02/02/2008
14:25
Q button
Getting Started
Playback Mode
1
Use this mode when you want to play back an image or sound file
straightaway without taking any more pictures.
1
Press the power switch while holding down the Q
button.
The display turns on with the lens retracted and the camera turns on
in Playback Mode.
To switch from Playback Mode to A mode, press the Q button or
press the shutter release button halfway.
Playing Back Still Pictures 1p.42
35
Initial Settings
1
Set the language, time, and date after purchasing the camera before you
start taking pictures.
Getting Started
Four-way controller
4 button
3 button
The [Language/
] screen appears when the camera is turned on for
the first time. Perform the operations in “Setting the Display Language”
below to set the language, and in “Setting the Date and Time” (p.38) to
set the current date and time.
Language, Date, and Time can be changed later. Refer to the pages
below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (1p.169).
• To change the date and time, follow the steps in “Changing the Date
and Time” (1p.165).
Setting the Display Language
1
Use the four-way controller
(2345) to choose the display
language.
English Dansk
Svenska
Deutsch Suomi
Polski
Italiano Magyar
Nederlands
MENU Cancel
36
OK
OK
2
Press the 4 button.
Initial Setting
English
Hometown
New York
MENU Cancel
DST
OFF
OK
OK
Daylight saving time
If you accidentally select another language and go to the next procedure,
perform the following operation to set the language back.
1
Getting Started
The Initial Setting screen appears in the
selected language. If the desired settings
for [Hometown] and daylight saving time
appear, press the 4 button again to
display the [Date Adjust] screen. Go to
“Setting the Date and Time” (p.38).
Go to Step 3 in “Setting Hometown and
DST” if the desired settings do not appear.
When Another Language Has Been Inadvertently Selected
1
2
Press the four-way controller (5).
Use the four-way controller (2345) to select the
language and press the 4 button.
The Initial Setting screen appears in the selected language.
When the Screen After Step 2 Appears in Another Language
1
2
3
4
5
Press the 4 button.
Press the 3 button.
Press the four-way controller (5).
Use the four-way controller (32) to select [Language/
].
Press the four-way controller (5).
The [Language/
6
7
] screen appears.
Use the four-way controller (2345) to select the
language.
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset Hometown
and the Date and Time, refer to the pages below for instructions.
• To change Hometown, follow the steps in “Setting the World Time” (p.167).
• To change the Date and Time, follow the steps in “Changing the Date and
Time” (p.165).
37
Setting Hometown and DST
3
1
Press the four-way controller (3).
Initial Setting
The frame moves to [Hometown].
Getting Started
4
English
Press the four-way controller (5).
Hometown
New York
The Hometown screen appears.
5
Use the four-way controller (45)
to choose the city.
6
Press the four-way controller (3).
DST
OFF
MENU Cancel
OK
OK
The frame moves to [DST] (Daylight Saving Time).
7
Use the four-way controller (45) to select O (On) or
P (Off).
8
Press the 4 button.
The Initial Setting screen appears.
9
Press the 4 button.
The Date Adjust screen appears. Next, set the date and time.
Setting the Date and Time
Set the current date and time and the display style.
1
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
2
Use the four-way controller (23)
to choose the date and time
display style.
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
0:00
MENU Cancel
3
Press the four-way controller (5).
The frame moves to [24h].
4
5
Use the four-way controller (23)
to select [24h] (24-hour display) or
[12h] (12-hour display).
Press the four-way controller (5).
The frame returns to [Date Style].
38
OK
OK
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
MENU Cancel
0:00
OK
OK
6
Press the four-way controller (3).
The frame moves to [Date].
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
Press the four-way controller (5).
The frame moves to the month.
8
Use the four-way controller (23)
to change the month.
OK
Date Adjust
Date Style
mm/dd/ yy 24h
Date
01/01/2008
Time
Change the day and year in the same manner.
MENU Cancel
Next, change the time.
If you selected [12h] in Step 4, the setting
switches between am and pm corresponding to the time.
9
OK
Getting Started
MENU Cancel
7
1
0:00
0:00
OK
OK
Press the 4 button.
The setting is set and the camera returns to capture status.
Language, Date, Time, Hometown, and DST can be changed. Refer to
the pages below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (1p.169).
• To change the date and time, follow the steps in “Changing the Date
and Time” (1p.165).
• To change the city or turn DST on and off, follow the steps in “Setting
the World Time” (1p.167).
When the Initial Setting or Date Adjust screen is displayed, you can
cancel the setting operation and switch to Capture mode by pressing
the 3 button. In this case, the Initial Setting screen will appear
next time you turn the camera on.
If you press the 4 button in Step 9, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the Initial Setting screen. Refer to “List of World Time Cities” (p.180)
for the video output format of each city set as the Initial Setting, and “Changing the
Video Output Format” (p.172) for changing the setting of the video output format.
39
Quick Start
Taking Still Pictures
Shutter release button
Zoom/w/x button
2
Quick Start
The standard procedure for taking still pictures is described below. The
flash fires automatically depending on the light conditions.
1
2
3
4
Press the power switch.
38
The camera turns on and is ready to take
still pictures. In this manual, this is called
Still Picture Capture mode.
Confirm the subject and shooting
information on the display.
02/02/2008
14:25
The focus frame in the middle of the display
Focus frame
indicates the zone of automatic focusing.
You can change the captured area by pressing the Zoom/w/x button
to the left or right.
x : enlarges the subject
w : widens the area that is captured by the camera
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
Press the shutter release button fully.
The picture is taken.
The image appears on the display for one second (Instant Review) and
is saved to the SD Memory Card or built-in memory. (p.41)
Press the Green button to switch to the 9 (Green) mode and let the
camera set all the shooting functions automatically. Selecting the 9
mode is the easiest way to ensure that pictures come out well. (p.63)
40
Using the Shutter Release Button
The shutter release button works in a two-step action as follows.
Press fully
Press the shutter release button all the way down to take the picture.
[Poor focusing conditions]
The camera may not be able to focus under the following conditions. In
these cases, lock the focus on an object the same distance away as the
subject (by pressing and holding the shutter release button halfway), then
aim the camera at your subject and press the shutter release button fully.
2
Quick Start
Press halfway
The focus and exposure are locked when the shutter release button is
pressed halfway. The green focus frame lights on the display when the
shutter release button is pressed halfway and the subject is in focus. If
the subject is out of focus, the frame turns red.
• Objects that lack contrast such as a blue sky or white wall
• Dark places or objects, or conditions that prevent light being
reflected back
• Horizontal lines or intricate patterns
• Fast moving objects
• When there is an object in the foreground and an object in the
background in the same picture
• Strongly reflected light or strong backlighting (bright background)
Instant Review
The image appears on the display for one second (Instant Review) immediately
after it is captured. You can change the Instant Review time. (p.101)
You can delete the image during Instant Review by pressing the i button.
• When the camera detects that the subject’s eyes are closed, the
message [Closed eyes have been detected.] appears during
Instant Review (This function is called “Blinking Detection”). While
the message appears, press the Green button and choose
[Delete] from the menu to delete the taken image.
• Even when Instant Review is set shorter than [3sec], the message
appears for 3 seconds.
• When the Face Recognition function does not work, “Blinking
Detection” also does not function. Even if the subject’s faces are
recognized, “Blinking Detection” does not function depending on
the condition of the recognized faces.
41
Quick Start
Playing Back Still Pictures
Shutter release
button
2
Q button
Quick Start
Four-way controller
Playing Back Images
1
Press the Q button after taking a
picture.
The image appears on the display. In this
manual, this is called Q mode (Playback
mode). Displaying one image in full in Q
mode (Q mode default setting) is called
single-image display.
Press the Q button again in Q mode or
press the shutter release button halfway to
switch to A mode.
Playing Back the Previous or Next Image
1
Press the Q button after taking a picture.
The image appears on the display.
2
Press the four-way controller (45).
The previous or next image appears.
42
File number
100 - 0038
02/02/2008
14:25
Q button
Four-way controller
Rotating the Displayed Image
1
2
3
4
2
Quick Start
4 button
i button
Press the Q button after taking a picture.
The image appears on the display.
Press the four-way controller (3).
The Playback Mode Palette appears.
Use the four-way controller (234
5) to select s (Image Rotation) and
press the 4 button.
The rotation selection screen (0°, Right 90°,
Left 90°, or 180°) appears.
Use the four-way controller
(2345) to choose the rotation
direction and press the 4 button.
MENU Cancel
OK
OK
The rotated image appears.
• Movies cannot be rotated.
• Protected images can be rotated, but they cannot be saved in a
rotated state.
Deleting the Displayed Image
Press the i button while the image is
displayed to display the Delete screen. Use the
four-way controller (2) to select [Delete] and
press the 4 button. (p.128)
100 - 0017
Delete
Cancel
All Images/Sounds
OK
OK
43
Common Operations
Understanding the Button Functions
1
2
3
4
5
3
Common Operations
6
7
8
9
A Mode
1
Power switch
2
Shutter release button
Turns the camera on and off. (p.34)
Focuses the camera on the subject when pressed halfway in Still
Picture Capture mode. (Except in 3, s and \ modes) (p.40)
Takes the still picture when pressed down fully. (p.40)
Starts and stops movie recording in C mode. (p.108)
Starts and stops sound file recording in O mode. (p.157)
3
I button
Switches the Face Recognition function (p.56). The Face Recognition
function is switched as follows each time the I button is pressed:
Smile Capture ´ Face Priority Off ´ Face Priority On
4
Zoom/w/xbutton
Changes the captured area. (p.78)
5
Q button
Switches to the Q mode. (p.115)
44
6
Four-way controller
(2)
(3)
(4)
(5)
(23)
:
:
:
:
:
Changes the drive mode. (p.76, p.77)
Displays the Capture Mode Palette. (p.53)
Changes the flash mode. (p.89)
Changes the focus mode. (p.87)
Adjusts \ in \ mode. (p.88)
7
4/W button
8
Green button
Changes the information on the display. (p.85)
Switches to the 9 (Green) mode. (p.63)
Calls up the assigned menu. (p.57)
3 button
Displays the [A Rec.Mode] menu. (p.48)
Common Operations
9
3
45
1
2
3
4
5
6
3
7
Common Operations
8
9
Q Mode
1
Power switch
2
Shutter release button
3
I button
Turns the camera on and off. (p.34)
Switches to A mode. (p.115)
Zooms up on the subject’s faces in the face-recognized image in order
of the recognition during shooting. (Face close-up playback) (p.119)
4
Zoom/f/y button
Press f during single-image display to change to nine-Image display.
Returns to the previous display when y is pressed. (p.116)
Enlarges the image when y is pressed during single-image display.
Returns to the previous display when f is pressed. (p.118)
Press f during nine-image display to change to folder or calendar
display. (p.117)
Press y during folder display to change to nine-image display of the
selected folder. (p.117)
Press y during calendar display to change to nine-image display for the
selected date. (p.117)
Adjusts the volume during playback of movies or sound files. (p.125, p.159)
46
5
Q button
Switches to A mode. (p.115)
6
Four-way controller
(2)
(3)
7
4/W button
Changes the information on the display. (p.121)
Returns zoom display or nine-image display to single-image display.
(p.116, p.118)
Changes to nine-image display of the selected folder during folder
display. (p.117)
Changes to single-image display of the selected date during calendar
display. (p.117)
8
3
Common Operations
: Plays back and pauses a movie or sound file. (p.125, p.159)
: Displays the Playback Mode Palette. (p.60)
Stops a movie or sound file during playback. (p.125, p.159)
(45)
: Displays the previous or next image and sound file during
single-image display. (p.42)
Frame forwards, frame reverses, reverses a movie and
makes a movie play forwards during playback. (p.125)
Fast forwards, reverses, and moves to the next index in
sound file playback. (p.159)
(2345) : Moves the display area during zoom display. (p.118)
Selects an image in nine-image display, a folder in folder
display, and a date in calendar display. (p.116, p.117)
Moves the image when using the Frame Composite
function. (p.145)
Green/i button
Switches from single-image display to the Delete screen. (p.128)
Switches from nine-image display to the Select & Delete screen.
(p.130)
Switches from folder display to the calendar display screen. (p.117)
Switches from calendar display to the folder display screen. (p.117)
9
3 button
Displays the [W Setting] menu during single-image display. (p.48)
Returns to single-image display during Playback Mode Palette display. (p.59)
Returns zoom display or nine-image display to single-image display. (p.116)
Changes to nine-image display of the selected folder during folder
display. (p.117)
Changes to nine-image display of the selected date during calendar
display. (p.117)
47
Setting the Camera Functions
To change the camera settings, press the 3 button to display the [A
Rec.Mode] menu or [W Setting] menu. Menus for playing back and editing
images and sound files are displayed from the Playback Mode Palette.
Setting with the Menus
Press the 3 button in A mode to display the [A Rec.Mode] menu.
Press the 3 button in Q mode to display the [W Setting] menu.
During recording
3
During playback
Common Operations
38
100 0038
100-0038
02/02/2008
14:25
02/02/2008
14:25
MENU
Rec.Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU
1/3
Format
Sound
Date Adjust
World Time
Folder Name
Auto
MENU Exit
Rec.Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
02/02/2008
Date
MENU Exit
1/3
8M
1/3
Setting
Format
Sound
Date Adjust
World Time
AWB
Folder Name
Auto
02/02/2008
Date
MENU Exit
MENU Exit
SHUTTER
1/3
Setting
8M
AWB
MENU
OK or
Press halfway
38
The setting is
complete and
the camera
returns to A
mode
48
02/02/2008
14:25
100 0038
100-0038
02/02/2008
14:25
The setting is
complete and
the camera
returns to Q
mode
A guide to available button operations appears on the display during
menu operation.
Ex.) To set the [Quality Level] on the [A Rec.Mode] menu
1
Press the 3 button in A
mode.
The [A Rec.Mode] menu appears.
2
Press the four-way controller (3).
The frame moves to [Recorded Pixels].
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
3
MENU Exit
Press the four-way controller (3).
The frame moves to [Quality Level].
Rec.Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
8M
AWB
Auto
MENU Exit
4
Press the four-way controller (5).
A pull-down menu appears with the items
that can be selected.
The pull-down menu displays only those
items that can be selected with the current
camera settings.
5
Storage Capacity
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
13
Common Operations
3
8M
Auto
MENU Cancel
OK
OK
Use the four-way controller (23)
to change the setting.
The quality level changes each time the four-way controller (23) is
pressed.
Refer to the following page for instructions on saving settings and
canceling changes.
49
To Save the Setting and Start Taking Pictures
6
Press the shutter release button halfway.
The setting is saved and the camera returns to capture status.
When the shutter release button is pressed fully, the picture is taken.
When the [W Setting] menu is displayed from Q mode, you can
switch to A mode by pressing the Q button.
3
To Save the Setting and Begin Playback of Images
Common Operations
6
Press the Q button.
When the [A Rec.Mode] menu is displayed from A mode, the setting
is saved and the camera returns to playback status.
To Save the Setting and Continue with Menu Operations
6
Press the 4 button or the four-way controller (4).
The setting is saved and the screen returns to Step 3.
To Cancel the Changes and Continue with Menu Operations
6
Press the 3 button.
The changes are canceled and the screen returns to Step 3.
The 3 button function differs depending on the screen. Refer to
the guide indications.
MENU Exit
MENU
: Exits the menu and returns to the original screen.
: Returns to the previous screen with the current
setting.
MENU Cancel : Cancels the current selection, exits the menu and
returns to the previous screen.
50
Menu List
This displays the items that can be set with the menus and provides
descriptions of each item. See the list of default settings in the Appendix
“Default Settings” (p.181) to decide whether you want the settings saved
when the camera is turned off and whether you want the settings
returned to the defaults when the camera is reset.
[A Rec.Mode] Menu
This menu shows the functions related to taking still pictures and
recording movies.
Item
Quality Level
White Balance
Focusing Area
AE Metering
Movie
Sensitivity
EV Compensation
Recorded Pixels
Quality Level
Frame Rate
Color Mode
Movie SR
Digital Wide
Digital Zoom
Instant Review
Memory
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Description
For choosing the number of recorded pixels of still
pictures
For choosing the quality level of still pictures
For adjusting the color balance according to the
lighting conditions
For changing the area of the autofocus
For setting the area of the screen that is metered to
determine the exposure
For setting the sensitivity
For adjusting the overall brightness of the picture
For choosing the number of recorded pixels of movies
For choosing the quality level of movies
For setting the frame rate (number of frames per
second)
For choosing a color mode for movies
For choosing whether to use the movie shake
reduction function
For choosing whether to use the Digital Wide function.
For choosing whether to use the digital zoom function
For setting the Instant Review time
For choosing whether to save the set values of the
shooting function or return to the defaults when the
camera is turned off
For assigning a function to the Green button in
Capture mode
For choosing sharp or soft outlines
For setting the color saturation
For setting the image contrast level
For choosing whether to imprint the date when taking
still pictures
Page
p.91
3
p.93
Common Operations
Recorded Pixels
p.94
p.100
p.96
p.98
p.84
p.110
p.111
p.112
p.113
p.114
p.83
p.80
p.101
p.106
p.58
p.102
p.103
p.104
p.105
51
• Use the 9 (Green) mode to enjoy easy picture-taking using
standard settings, regardless of the settings in the [A Rec.Mode]
menu. (p.63)
• Assigning frequently used functions to the Green button enables
you to go straight to the menu item. (p.57)
[W Setting] Menu
Item
Format
3
Sound
Common Operations
Date Adjust
World Time
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Guide Display
Reset
52
Description
For formatting the SD Memory Card or built-in memory
For adjusting the operation volume and playback
volume, and setting the start-up sound, shutter sound,
key operation sound and self-timer sound
For adjusting the date, time, and date style
For setting the world time
For setting the language in which menus and
messages appear
For choosing how names are assigned to folders for
storing images and sound files
For setting the USB cable connection (to PC or printer)
For setting the output format to the AV equipment
For changing the brightness of the display
For setting the time until the camera enters powersaving mode
For setting the time until the camera turns off
automatically
For choosing whether to use the Quick Zoom function
(p.118) when playing back images
For displaying a guide for the function selectable in the
Capture Mode Palette and the Playback Mode Palette
For returning settings other than the date and time,
language, world time and video out to their defaults
Page
p.162
p.163
p.165
p.167
p.169
p.170
p.171
p.172
p.173
p.174
p.175
p.176
p.177
p.178
Four-way controller
4 button
Setting the Shooting Mode
3
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller
(2345) to choose a shooting
mode.
Landscape
Common Operations
The Optio M50 has a variety of shooting modes that let you take pictures
or record movies and sound in different situations simply by choosing the
right mode for the particular situation from the Capture Mode Palette.
A shooting mode guide appears about 2
seconds after the shooting mode is chosen.
OK OK
MENU Cancel
You can turn off the shooting mode guide by
using the [W Setting] menu. Refer to
“Setting the Guide Display” (p.177) for details of how to operate the
menu.
3
Press the 4 button.
38
The shooting mode is selected and the
camera returns to capture status.
02/02/2008
14:25
53
• In shooting modes other than R, A, C, O, 4 and F,
saturation, contrast, sharpness, white balance, etc. are
automatically set to the optimal settings for the selected mode.
• Some functions may not be available or may not function fully
depending on the selected shooting mode. For details, refer to
“Functions Available for Each Shooting Mode” (p.186).
• You can turn off the shooting mode guide on the Capture Mode
Palette. (p.177)
There are 17 available shooting modes.
3
Common Operations
54
Item
Description
b Auto Picture
Automatically select the best capture mode.
R Program
The basic mode for capturing images. Various
functions can also be set with this mode.
Used for night scenes. Use a tripod, etc. to
reduce shaking and use a flash for portraits.
A Night Scene
C
Movie
For capturing movies. Sound is also recorded.
For recording sound only. Be careful not to cover
O Voice Recording the microphone with your hands.
For capturing landscape views. The camera
q Landscape
focuses on a wide range.
For capturing brightly colored flowers.
< Flower
Reproduces the outline of the flower softly.
Adjusts color and brightness to reproduce skin
z Natural Skin Tone more beautifully than Portrait.
For capturing portraits. The skin tone will be
e Portrait
brighter to make the person look healthy.
For capturing images with dazzling backgrounds,
i Surf & Snow
such as beaches or snowy mountains.
For subjects in fast motion. Keeps the camera in
\ Sport
focus until the shutter is released.
Digital SR (Blur
Higher sensitivity reduces blur from both subject
4 Reduction)
and camera movement.
For capturing images of pets in motion. A setting
E Pet
suitable for the pet’s coat can be set.
For capturing moving kids. Reproduces healthy
H Kids
and bright skin tone.
Page
p.61
p.62
p.65
p.108
p.157
—
—
p.68
p.68
—
—
p.65
p.70
p.72
Item
D
Food
F Digital Panorama
S Digital Wide
Description
For capturing images of food. Saturation will be
rather high to make it look appetizing.
Stitches images taken with the camera to create
a panoramic photograph.
Composites two images resulting in wider field of
view.
Page
—
p.74
p.81
S (Digital Wide) mode cannot be chosen from the Capture Mode
Palette. Refer to p.81 on how to choose this mode.
3
Common Operations
55
I button
3
Setting the Face Recognition function
Common Operations
With the Optio M50, the Face Recognition function is available with all
shooting modes except O mode.
In the Face Recognition function, you can choose the Face Priority
function that recognizes the subject’s face, focuses (Face Recognition
AF) and performs exposure compensation (Face Recognition AE), and
the Smile Capture function* that recognizes the subject’s face, focuses
(Face Recognition AF), performs exposure compensation (Face
Recognition AE) and captures an image automatically.
* Depending on the condition of the recognized faces, an image may not be
captured automatically because the Smile Capture function will not work. If this
happens, press the shutter release button to capture an image.
Switching the Face Recognition Function
By default, the Face Recognition function is set to Face Priority On. The Face
Recognition function is switched as follows each time the I button is pressed:
Smile Capture ´ Face Priority Off ´ Face Priority On
Face Priority On
Smile Capture
Face Priority Off
38
38
38
02/02/2008
14:25
02/02/2008
14:25
02/02/2008
14:25
An icon indicating either Face Priority On or Smile Capture appears on
the display. (The icon does not appear when the Face Recognition
function is not activated.)
56
• The Face Recognition function cannot be set to off in b (Auto
Picture), z (Natural Skin Tone), e (Portrait) or H (Kids) mode.
You can select either Face Priority On or Smile Capture.
• Face Priority On is automatically selected in b (Auto Picture), z
(Natural Skin Tone), e (Portrait), H (Kids) or C (Movie) mode.
When switching to another mode from one of these modes, the
Face Recognition setting returns to the previous setting.
• Refer to p.68 and p.72 on how to shoot with the Face Recognition
function.
Assign menu items to the Green Button and recall these quickly by
simply pressing the Green Button. This is useful for going straight to the
setting screens of frequently used functions such as EV Compensation,
Sensitivity and White Balance.
• The following functions can be assigned to the Green button:
Green Mode, Recorded Pixels, Quality Level, White Balance,
Focusing Area, AE Metering, Sensitivity, EV Compensation,
Sharpness, Saturation and Contrast.
• The Green Button setting can be returned to its default setting by
selecting [Reset] on the [W Setting] menu.
• The functions assigned to the Green button can be used in the usual
manner on the original menu ([A Rec.Mode]).
• You cannot save different settings for the same function on the
Green button and on the original menu.
3
Common Operations
Calling Up a Specific Menu
57
Assigning a Function to the Green Button
1
2
3
4
3
Select [Green Button] on the [A Rec.Mode] menu.
Press the four-way controller (5).
Green Button
A pull-down menu appears.
Use the four-way controller (23)
to choose a function and press the
4 button.
Press the 3 button.
Q
9Green Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
MENU Cancel
OK
OK
The camera returns to capture status with the current setting.
Common Operations
Using the Green Button
1
Press the Green button in A
mode.
EV Compensation
0.0
The function assigned to [Green Button] on
the [A Rec.Mode] menu is called up.
2
Use the four-way controller (45)
to change the settings and press
the 4 button.
The camera returns to capture status.
If a function other than the 9 (Green) mode has been assigned to
the Green button, the camera returns to the original screen if no
operation is performed for 5 seconds after the Green button is
pressed.
58
Using the Playback Function
Press the four-way controller (3) in Q mode to display the Playback
Mode Palette.
You can display the playback function you want to use simply by using
the four-way controller (2345) to choose an icon and pressing the
4 button.
100 0038
100-0038
3
Common Operations
02/02/2008
14:25
MENU
Resize
Digital SR
MENU
Cancel
OK
MENU
OK
Cancel
SHUTTER
OK
OK
OK
Press halfway
38
02/02/2008
14:25
Closes the Playback Mode
Palette and goes to A mode.
Recorded Pixels
Quality Level
MENU Cancel
8M
OK
OK
Goes to the screen for
selected playback function.
• When the frame is placed over each icon of the Playback Mode
Palette, a guide for each function appears after about 2 seconds.
• You can turn off the guide for each function on the Playback Mode
Palette. (p.177)
59
Playback Mode Palette
3
Common Operations
60
Description
For reducing the camera shake in recorded
P Digital SR
images
For playing back recorded images one after
u Slideshow
another
For changing the recorded pixels and quality of
n Resize
images
Creates an image from a selected portion of the
o Cropping
image
For copying images and sound files from the
Image/Sound
built-in memory to the SD Memory Card and vice
p Copy
versa
For rotating still pictures
s Image Rotation
For processing still pictures as you desire
D Digital Filter
Save as Still For saving one frame from a movie as a still
image
picture
[
Divide
For dividing a movie into two
Movies
Y Frame Composite For adding a decorative frame to a still picture
Red-eye
For correcting still pictures where the flash has
Z Compensation
caused the subject to appear with red eyes
For adding a voice memo to still pictures
\ Voice Memo
For protecting images and sound files from
Protect
Z
accidental deletion
For setting the DPOF print order data for still
r DPOF
pictures
] Image Recovery For recovering deleted images
For setting the start-up screen
^ Start-up Screen
Movie Edit
Item
Page
p.122
p.123
p.136
p.138
p.139
p.43
p.141
p.147
p.148
p.145
p.144
p.160
p.134
p.149
p.133
p.179
Taking Pictures
Taking Pictures
Shutter release
button
Four-way controller
4 button
In b (Auto Picture) mode, when you press the shutter release button, the
camera selects the most appropriate mode from six shooting modes: (Standard), A (Night Scene), q (Landscape), e (Portrait), \ (Sport)
and < (Flower) modes.
1
Press the four-way controller (3) in A mode.
2
Use the four-way controller (2345) to select b
(Auto Picture).
3
4
4
Taking Pictures
Taking Pictures Automatically (Auto Picture
Mode)
The Capture Mode Palette appears.
Press the 4 button.
Press the shutter release button halfway.
The focus frame on the display turns green when the sublect is in
focus, and the icon for selected shooting mode will appear on the top
left of the display.
5
Press the shutter release button fully.
The picture is taken.
In b mode, the exposure compensation is not available. (1 p.84)
Taking Still Pictures 1p.40
61
Shutter release
button
Four-way controller
4 button
Setting The Functions (Program Mode)
4
In R (Program) mode, the camera automatically sets the shutter speed
and aperture for taking still pictures. However, you can select other
functions such as the flash mode and recorded pixels.
Taking Pictures
1
2
3
4
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Use the four-way controller (2345) to select R
(Program).
Press the 4 button.
Set the functions you want to use.
38
Refer to “Setting the Shooting Functions”
(p.87 - p.105) for details of how to set the
functions.
5
Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
Taking Still Pictures 1p.40
62
02/02/2008
14:25
Shutter release
button
Green button
Taking Pictures in the Basic Mode (Green Mode)
In the 9 (Green) mode, you can enjoy easy picture-taking using
standard settings*, regardless of the settings in the [A Rec.Mode]
menu.
Press the Green button in A
mode.
38
The camera switches to 9 mode.
Press the Green button again to return to
the status before 9 mode was selected.
2
Press the shutter release button
halfway.
Taking Pictures
1
4
The focus frame on the display turns green if the subject is in focus.
3
Press the shutter release button fully.
The picture is taken.
63
• Assign 9 mode to the Green button for using 9 mode. (p.57)
• In 9 mode, you cannot change the information on the display by
pressing the 4/W button.
• You cannot use the [A Rec.Mode] menu or Capture
38
Mode Palette in 9 mode. If you try to display the [A
Rec.Mode] menu or Capture Mode Palette, - (key
lock icon) appears.
Key lock icon
• If you switched to Q mode from 9 mode, you
cannot display the [W Setting] menu by pressing the 3
button. If you try to display the [W Setting] menu, - (key lock icon)
appears.
• When the camera is turned off in 9 mode, it turns on in 9 mode
next time the power switch is pressed.
Green mode must
be canceled to use
this function.
Program
4
Taking Pictures
64
* 9 mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
EV Compensation
Digital Wide
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
Date Imprint
, (Auto)
9 (Standard)
= (Standard)
Normal
E
D (Better)
F (Auto)
J (Multiple)
L Multi-segment metering
Auto
±0.0
P (Off)
O (On)
1sec
G (Normal)
G (Normal)
G (Normal)
P (Off)
Shutter release
button
Four-way controller
4 button
Taking Pictures of Dark Scenes
(Night Scene/Digital SR (Blur Reduction) Mode)
You can choose settings appropriate for taking pictures of dark scenes,
such as nightscapes.
1
2
3
4
5
Use this mode when taking pictures of night views.
Use this mode to take pictures indoors or in low light conditions.
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Use the four-way controller (2345) to select A
(Night Scene) or 4 (Digital SR (Blur Reduction)).
Press the 4 button.
Taking Pictures
A
4
4
The shooting mode is selected and the camera returns to capture status.
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
Press the shutter release button fully.
The picture is taken.
• The shutter speed tends to be slower when taking pictures of dark
scenes.
• To prevent camera shake, use a tripod and/or the self-timer
function. (p.76)
• In 4 mode, sensitivity is automatically set to Auto. (p.99)
• In 4 mode, the number of recorded pixels is fixed at f (2592
× 1944).
65
Shutter release
button
Zoom/f/y button
Four-way controller
4 button
3 button
Framing Your Pictures (Frame Composite)
4
In Y (Frame Composite) mode, you can take pictures using the frames
stored in the camera.
Taking Pictures
1
2
Press the four-way controller (2) in A mode.
Use the four-way controller (45)
to select Y (Frame Composite)
and press the 4 button.
A 9-frame display of the frame selection
screen appears.
3
Use the four-way controller
(2345) to choose the frame you
want to use.
4
Press y on the Zoom/f/y
button.
OK
OK
The selected frame appears in single-image
display. You can choose another frame
using either of the following operations.
OK OK
• Use the four-way controller (45) to
choose a different frame.
• Press f on the Zoom/f/y button to return to the 9-frame display of
the frame selection screen, and then perform Step 4 to choose a
different frame.
5
Press the 4 button.
The frame appears on the screen.
66
6
7
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
Press the shutter release button fully.
The picture is taken.
• In Y mode, recorded pixels is fixed at h (2048 × 1536).
• In b (Auto Picture), C (Movie), O (Voice Recording), F
(Digital Panorama) or S (Digital Wide) mode, Y mode is not
available.
4
Taking Pictures
67
Shutter release
button
Four-way controller
4 button
Taking Pictures of People (Natural Skin Tone/
Portrait Mode)
4
Taking Pictures
z (Natural Skin Tone) and e (Portrait) modes are suitable for taking
pictures of people. Face Recognition (p.56) operates for each shooting
mode, making it easier to emphasize the subject’s face when taking pictures.
z
e
1
Use this mode when you want to enhance the natural skin tone of the people
in your pictures.
Use this mode when taking pictures of people.
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select d
(Natural Skin Tone) and press the 4 button.
Choose c (Portrait) when c is displayed instead of d and press the
4 button.
3
4
Use the four-way controller (23)
to choose e or z.
Press the 4 button.
Natural Skin Tone
Portrait
The shooting mode is selected and the
camera returns to capture status.
OK OK
MENU Cancel
When the subject’s face is recognized, a
yellow focus frame appears on the display at
the location of the face (when multiple faces are recognized,
the main face is indicated in yellow). As the subject moves, the size
and location of the focus frame change to match the location of the
subject’s face.
68
5
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
6
Press the shutter release button fully.
The picture is taken.
• If the camera cannot recognize the subject’s face, the camera
focuses using the Focusing Area currently selected.
• When Smile Capture is activated, the shutter will be released
automatically when the camera recognizes the subject’s smile.
However, depending on the condition of the recognized faces, an
image may not be captured automatically because the Smile
Capture function will not work.
4
Taking Pictures
69
Shutter release
button
Four-way controller
4 button
Taking Pictures of Your Pet (Pet Mode)
4
Use this mode to keep your moving pet in focus while you take the picture
and capture the color of your pet’s coat. Choose the appropriate icon
depending on what color your pet is (closer to black or white or in between).
Taking Pictures
1
2
3
4
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Use the four-way controller (2345) to select E (Pet).
Press the 4 button.
The Pet mode selection screen appears.
Use the four-way controller (23)
to select E, F, F, H, G or G.
There are two types of icons: a cat and dog
OK OK
MENU Cancel
icon.
(Choosing either the cat or dog icon does
not affect the resulting picture. Choose whichever you prefer.)
Choose an icon (white, gray, or black) whose tone best matches your
pet’s coat or fur.
5
6
Press the 4 button.
The Pet mode is selected and the camera
returns to capture status.
Press the shutter release button
halfway.
38
02/02/2008
The focus frame on the display turns green
14:25
if the subject is in focus.
The focus frame follows the pet while the shutter release button is
pressed halfway.
70
7
Press the shutter release button fully.
The picture is taken.
4
Taking Pictures
71
Shutter release
button
Four-way controller
4 button
Taking Pictures of Children (Kids Mode)
4
Taking Pictures
H (Kids) mode is suitable for taking pictures of moving children. It also
reproduces healthy and bright skin tone. Face Recognition (p.56)
operates automatically for this mode, making it easier to emphasize the
subject’s face when taking pictures.
1
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select H
(Kids).
3
Press the 4 button.
When the subject's face is recognized, a
yellow focus frame appears on the display
at the location of the face (when multiple
faces are recognized, the main face is
indicated in yellow). As the subject moves,
the size and location of the focus frame
change to match the location of the subject’s face.
4
38
02/02/2008
14:25
Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
5
Press the shutter release button fully.
The picture is taken.
72
• Face Recognition AF and AE may not work if the subject is
wearing sunglasses or has part of the face covered or if the
subject is not looking toward the camera.
• If the camera cannot recognize the subject’s face, the camera
focuses using the Focusing Area currently selected.
• When Smile Capture is activated, the shutter will be released
automatically when the camera recognizes the subject’s smile.
However, depending on the condition of the recognized faces, an
image may not be captured automatically because the Smile
Capture function will not work.
4
Taking Pictures
73
Shutter release
button
Four-way controller
4 button
Taking Panoramic Pictures (Digital Panorama
Mode)
4
Taking Pictures
In F (Digital Panorama) mode, take two or three frames in sequence
overlapping their edges by moving the camera horizontally. When the third
frame is taken, the images taken in sequence are automatically stitched
and the panoramic photograph is saved.
1
2
3
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Use the four-way controller (2345) to select F
(Digital Panorama).
Press the 4 button.
The shooting mode is selected and the
message [Set shift direction] is displayed.
4
Set shift direction
Use the four-way controller (45)
to choose the direction in which
the images will be joined.
The screen for taking the first frame is
displayed.
5
Press the shutter release button
halfway.
1
38
The focus frame on the display turns green
if the subject is in focus.
03/03/2008
14 :25
14:25
74
6
Press the shutter release button
fully.
1 2
The screen for taking the second frame is
displayed after you take the first frame.
If you select right (5) in Step 4:
The right edge of the first frame appears
in semi-transparent form on the left edge
of the display.
SHUTTER
2nd frame
OK
Exit
If you select left (4) in Step 4:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
7
Move the camera horizontally to the selected direction
and take the second frame.
8
The panorama stitching starts when the third frame is
taken and the stitched image appears.
The stitched image does not appear when the Instant Review (p.41,
p.101) is off.
4
Taking Pictures
Move the camera so that the semi-transparent image and the actual
view overlap and press the shutter release button. Repeat Steps 5 to
7 to take the third frame.
• When the Face Recognition is activated (p.56), it works only when
taking the first frame.
• If you press the 4 button after shooting the first or second frame,
you can save the captured image(s). (If you press the OK button
after shooting the second frame, you can save the first and the
second frames as a stitched image.)
75
Shutter release
button
Four-way controller
4 button
Using the Self-timer
4
In Self-timer mode, the picture is taken ten seconds or two seconds after
the shutter release button is pressed.
Stabilize the camera with a tripod when taking a picture with the self-timer.
Taking Pictures
g
Z
1
2
3
4
Use this mode when you want to be included in a group picture.
The picture is taken approximately ten seconds after the shutter release
button is pressed.
Use this mode to avoid camera shake. The picture is taken approximately two
seconds after the shutter release button is pressed.
Press the four-way controller (2) in A mode.
Use the four-way controller
(453) to select g or Z and press
the 4 button.
The camera is ready to take the picture
using the self-timer.
Press the shutter release button
halfway.
Drive Mode
Self-timer
MENU
Cancel
OK
OK
The focus frame on the display turns green if the subject is in focus.
Press the shutter release button fully.
The picture is taken ten seconds or two seconds later.
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking when taking still pictures.
• In C (Movie) mode, recording will start after ten seconds (or two seconds).
• Press the shutter release button halfway while the self-timer is engaged
to stop the countdown and press fully to restart the countdown.
• Z cannot be selected while 9 (Green) mode is in default setting. Select
Z in another shooting mode and then switch the shooting mode to 9.
76
Shutter release
button
Four-way controller
4 button
Taking a Series of Pictures (Continuous Shooting Mode)
In this mode, pictures are taken continuously as long as the shutter
release button is pressed.
1
2
3
4
Press the four-way controller (2) in A mode.
Use the four-way controller (45)
to select 1 (Continuous Shooting)
and press the 4 button.
The camera is ready to take a series of pictures.
Drive Mode
Continuous Shooting
Press the shutter release button
halfway.
The focus frame on the display turns green if
the subject is in focus.
MENU Cancel
OK
4
Taking Pictures
1
Each time a picture is taken, the image is saved in the memory
Continuous
before the next image is taken. The higher the image quality,
Shooting
the longer the interval between shots.
OK
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in Continuous Shooting.
• 1 (Continuous Shooting) can not be chosen in b (Auto Picture),
A (Night), C (Movie), O (Voice Recording), F (Digital
Panorama) or S (Digital Wide) mode.
• You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of Continuous Shooting varies according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first image.
• When the Face Recognition is activated (p.56), it works only when
taking the first image.
77
Zoom/w/x button
Four-way controller
4 button
3 button
Using the Zoom
You can use the zoom to change the captured area.
4
1
Taking Pictures
Press the Zoom/w/x button in A
mode.
Zoom button (w) : Diminishes the subject
(Wide).
Zoom button (x) : enlarges the subject.
When you press and hold the button, the
camera automatically switches from optical
zoom to intelligent zoom. Once the button is
released and pressed again, the camera
switches to Digital Zoom.
38
25.5 x
Zoom bar
Zoom ratio
The zoom bar is displayed as follow.
Zoom in with high
image quality.
Optical zoom range*1
Zoom in with some degree
of image deterioration.
Intelligent
Zoom range*2
Digital Zoom
range
*1 You can zoom in to a maximum of 5x optically.
*2 The Intelligent Zoom range differs depending on the recorded
pixels. See the following table.
78
Recorded pixels and the maximum zoom ratio
Recorded
pixels
E
f
g
h
i
l
m
Intelligent Zoom
Not Available (5× optical zoom available)
Approx. 6.3×
Approx. 7.1×
Approx. 8.0×
Approx. 10.2×
Approx. 15.9×
Approx. 25.5× (Same as 25.5× Digital
Zoom)
Digital Zoom
Equivalent to approx.
25.5×
- When Digital Zoom is set to Off.
- When the recorded pixels is set to E. (5x optical zoom
available)
- In C (Movie) mode
- In 4 (Digital SR) mode
- When the sensitivity is set to 3200 or 6400.
4
Taking Pictures
• You are recommended to use a tripod to prevent camera shake when
taking pictures at a high magnification rate.
• Pictures taken in the digital zoom range appear grainier than pictures
taken in the optical zoom range.
• Intelligent Zoom is not available under the following conditions.
• The image enlarged using Intelligent Zoom may appear rough on the
display. This does not affect the quality of recorded image.
• In C mode, only Digital Zoom is available.
79
Setting the Digital Zoom
The digital zoom is set to O (On) in the default settings. To take pictures
using only the optical zoom, set the digital zoom to P (Off).
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Digital
Zoom].
3
Use the four-way controller (45)
to select O (On) or P (Off).
The selected setting is saved.
4
Taking Pictures
80
4
Press the 3 button.
The setting is complete and the camera
returns to capture status.
Rec.Mode
2/3
EV Compensation
Movie
Digital Wide
Digital Zoom
Instant Review
Memory
0.0
MENU
Saving the Digital Zoom Function Setting 1p.106
Exit
1sec
Zoom/w/x button
4 button
Four-way controller
Green button
3 button
Using the Digital Wide Function (Digital Wide
Mode)
1
Press the w side of the Zoom/w/
x button when in A mode.
Enter the Digital Wide
mode?
Press and hold the w side of the Zoom/
w/x button to set the zoom to the widest
position, release the button, and then press
it again.
2
3
Digital Wide
Cancel
OK
4
Taking Pictures
S (Digital Wide) mode can stitch two pictures taken into a 35 mm film
conversion equivalent to a maximum of approx. 28 mm.
OK
Press the four-way controller (2).
Press the 4 button.
The camera enters the S mode and an
explanation is displayed in the center of the
screen.
After 5 seconds or when you press the
Green button, the camera returns to capture
status.
Turn the camera 90º counterclockwise and
align your first picture.
1
Composites two
images. Overlap
the background and
the guide on the
left of the screen
for the 2nd shot.
81
+
4
Press the shutter release button.
The first captured image is saved, and the
shooting screen for the second image is
displayed. Overlap the image on the
preview guide on the left of the screen to
compose your picture.
If you want to stop capturing images in the
S mode, go to Step 6.
4
Taking Pictures
5
2
38
Guide
Press the shutter release button.
The combined first image and second image appear on the display for
one second (Instant Review), and then saved to the built-in memory or
SD Memory Card.
• For less distortion when taking the second picture, turn the camera
to overlap the background and the preview guide on the left of the
screen.
• Some distortion may result from moving objects, repeating patterns,
or if nothing exists when overlapping the first and second picture on
the preview guide.
• When the Face Recognition is activated (p.56), it works only when
taking the first image.
• The number of recorded pixels for images captured with S mode
is fixed at f (2592 × 1944).
82
6
Press the 3 button, 4
button, or Zoom/ w/x button.
7
8
Press the four-way controller (2).
Exit the Digital Wide
mode?
Press the 4 button.
Exit
Cancel
S mode stops.
OK
OK
Setting the Digital Wide Function
S mode is set to O (On) in the default settings. Use the [A Rec.Mode]
menu to set whether the camera enters S mode when the w side of
the Zoom/w/x button is pressed.
1
Press the 3 button in A mode.
4
2
Press the four-way controller (23) to select [Digital
Wide].
3
Use the four-way controller (45)
to select O (On) or P (Off).
The selected setting is saved.
4
Press the 3 button.
The setting is complete and the camera
returns to capture status.
Rec.Mode
EV Compensation
Movie
Digital Wide
Digital Zoom
Instant Review
Memory
2/3
0.0
Taking Pictures
[A Rec.Mode] appears.
1sec
MENU Exit
83
MENU
Four-way controller
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Exposure (EV Compensation)
4
You can adjust the overall brightness of the picture.
Use this function to take pictures that are intentionally overexposed or
underexposed.
Taking Pictures
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23)
to select [EV Compensation].
3
Use the four-way controller (45) to
select the EV value.
Rec.Mode
EV Compensation
Movie
Digital Wide
Digital Zoom
Instant Review
Memory
2/3
0.0
1sec
MENU Exit
The selected EV value is saved.
To brighten, select a positive (+) value. To darken, select a negative
(–) value.
You can choose the EV setting in the range of –2.0 EV to +2.0 EV in
1/3 EV steps.
4
Press the 3 button.
The setting is complete and the camera returns to capture status.
• If you use the EV compensation function frequently, you can save
time by assigning it to the Green button. (p.58)
• When the histogram is displayed, bright portions and dark portions are
indicated on the display, enabling you to check the exposure. (p.86)
• The EV compensation function cannot be used in b (Auto Picture)
or 9 (Green) mode.
Saving the EV Compensation Value 1p.106
84
Displaying Shooting Information in
Capture Mode
The display changes in the following sequence each time you press the
4/W button: Normal Display, Histogram + Info, No Info.
For details of each display mode, refer to “Monitor Indications” (p.18).
• Y appears if you press the shutter release button halfway when
camera shake is likely to occur. To prevent camera shake, use a
tripod and/or the self-timer function. (p.76)
• In 9 (Green) mode, you cannot change the information on the
display by pressing the 4/W button.
Normal Display
Histogram + Info
38
38
200
+1.0
02/02/2008
14:25
OK
OK
4
Taking Pictures
8M
OK
No Info
85
Using the Histogram
Number of pixels→
A histogram shows the
brightness distribution of an
image. The horizontal axis
represents brightness (dark at
the left and bright at the right)
and the vertical axis represents
the number of pixels.
The shape of the histogram
(Dark) ←Brightness→ (Bright)
before and after shooting tells
Dark portions
Bright portions
you whether the brightness and
contrast are correct or not, and lets you decide if you need to use EV
compensation and take the picture again.
4
Taking Pictures
Setting the Exposure (EV Compensation) 1p.84
Understanding Brightness
If the brightness is correct, the graph peaks in the middle. If the image is
too dark, the peak is on the left side, and if it is too bright, the peak is on
the right side.
Dark image
Correct image
Bright image
When the image is too dark, the part to the left is cut off (dark portions)
and when the image is too bright, the part to the right is cut off (bright
portions).
Bright portions blink red on the display and dark portions blink yellow.
Displaying Shooting Information in Capture Mode 1p.85
Displaying Shooting Information in Playback Mode 1p.121
Understanding Contrast
The graph peaks gradually for images in which contrast is balanced. The
graph peaks on both sides but sinks in the middle for images with a large
difference in contrast and low amounts of mid-level brightness.
86
Setting the Shooting Functions
Four-way controller
4 button
Selecting the Focus Mode
4
=
Standard
q
Macro
3
Pan Focus
s
Infinity
\ Manual Focus
1
2
Use this mode when the distance to the subject is 40 cm
(16 in.) or more. The camera is focused on the subject in
the autofocus area when the shutter release button is
pressed halfway.
This mode is used when the distance to the subject is
approx. 10 cm to 50 cm (4 in. to 24 in.). The camera is
focused on the subject in the autofocus area when the
shutter release button is pressed halfway.
This mode is used when you ask someone to take
pictures for you, or when taking pictures of the scenery
through the window of a car or train. The entire picture,
from the front to the back, is focused.
This mode is used for taking distant objects. The flash is
set to a (Flash Off).
Taking Pictures
Focus Mode
This mode lets you adjust the focus manually.
Press the four-way controller (5)
in A mode.
Focus Mode
Standard
The focus mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
Press the shutter release button
halfway.
MENU Cancel
OK
OK
The Focus Mode setting is saved and the camera returns to capture status.
87
• In 9 (Green) mode, you can only select =, q or 3.
• When = is selected and the optical zoom is fixed to Wide, if the
subject is closer than 40 cm, the camera automatically focuses from
10 cm. (Auto-Macro function)
• When shooting with q selected, if the subject is further than 50 cm
away, the camera automatically focuses to infinity.
Saving the Focus Mode 1p.106
Manual Focus
The procedure for setting the focus manually (\) is described below.
1
4
2
Taking Pictures
3
4
Press the four-way controller (5)
in A mode.
Use the four-way controller (5) to
select \ and press the 4 button.
The central portion of the image is
magnified to fill the screen of the display
when focusing.
Focus Mode
Manual Focus
MENU Cancel
OK
OK
Press the four-way controller (23).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller (23)
to adjust the focus using the indicator as a
guide.
2 : for distant focus
3 : for closer focus
Press the 4 button.
5m
2
1
MENU
OK
OK
\ indicator
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
88
Four-way controller
4 button
Selecting the Flash Mode
Flash Modes
Auto
a
Flash Off
b
Flash On
c
Auto + Red-eye
d
Flash On + Red-eye
b
Soft Flash
The flash discharges automatically depending on the
light conditions.
The flash does not discharge, regardless of the
brightness. Use this mode to take pictures where flash
photography is prohibited.
The flash discharges regardless of the brightness.
This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject’s eyes. The flash discharges automatically.
This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject’s eyes. The flash discharges regardless of the
light conditions.
This mode reduces the intensity of the flash so that the
flash is not too bright even when fired at close range.
The flash discharges regardless of the light conditions.
4
Taking Pictures
,
• The flash does not discharge (a Flash Off) in C (Movie) or F
(Digital Panorama) mode, or when the drive mode is set to 1, or
the focus mode is set to s.
• A pre-flash discharges when using the red-eye reduction function.
• In 9 (Green) mode, you can only select , or a.
• In A (Night) mode, you cannot select , and c.
Using the flash when capturing images at a close distance may
cause irregularities in the image due to the light distribution.
89
1
Press the four-way controller (4)
in A mode.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
Flash Mode
Auto
MENU
Cancel
OK
OK
The camera returns to capture status with
the selected flash mode.
4
Taking Pictures
[About the red-eye phenomenon]
Taking pictures using the flash may cause the subject’s eyes to
appear red in the resulting picture. This phenomenon occurs when
the light from the flash is reflected in the subject’s eyes. It can be
reduced by illuminating the area around the subject or moving closer
to the subject and zooming out to a wider angle. Setting the flash
mode to c (Auto + Red-eye) or d (Flash On + Red-eye) is also an
effective way of reducing red eyes.
If the subject’s eyes appear red despite such precautions, they can
be corrected by the red-eye compensation function (p.144).
Saving the Flash Mode 1p.106
90
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Selecting the Recorded Pixels
4
Taking Pictures
You can choose from seven recorded pixels settings for still pictures.
The larger your recorded pixels, the clearer the details will appear when
you print your picture. As the quality of the printed picture also depends
on the image quality, exposure control, resolution of the printer and other
factors, you do not need to select more than the required number of
recorded pixels. i (1600×1200) is adequate for making postcard-size
prints. The more pixels there are, the larger the picture and the bigger
the file size. The data volume also varies depending on the quality level
setting (p.93).
Recorded Pixels
Recorded Pixels
Use
For printing high quality photos or A4-size pictures or
larger, or editing images on a PC.
E 3264×2448
g 2304×1728
h 2048×1536
i 1600×1200
Clearer
f 2592×1944
For making postcard-size prints.
l 1024× 768
m
1
640× 480
For posting on a website or attaching to e-mail.
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Recorded
Pixels].
91
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the number of recorded
pixels.
5
Press the 4 button.
Storage Capacity
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU Cancel
12
8M
5M
4M
3M
2M
1024
640
OK
OK
The Recorded Pixels setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
4
Taking Pictures
• When drive mode is set to Y (Frame Composite), the number of
recorded pixels is fixed at h.
• The number of recorded pixels for images captured in S (Digital
Wide) or 4 (Digital SR) mode is fixed at f. (However, the
number of recorded pixels will be h if you exit the Digital Wide
mode without taking the second picture.)
• If you take and save only the first frame in F (Digital Panorama)
mode, the number of recorded pixels fixed at i.
• If you use the [Recorded Pixels] function frequently, you can save
time by assigning it to the Green button. (p.58)
Recorded Pixels and Quality Level of Still Pictures 1p.31
92
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Selecting the Quality Level
C
1
2
3
4
5
6
Best
D
Better
E
Good
Lowest compression rate. Suitable for photo prints.
Standard compression rate. Suitable for viewing the image
on a computer screen.
Highest compression rate. Suitable for posting on a
website or attaching to e-mail.
Press the 3 button in A mode.
4
Taking Pictures
You can select the quality (compression rate) of still pictures.
The more stars, the lower the compression rate and the clearer the picture, but the
file size becomes larger. The recorded pixels setting also affects the file size (p.91).
Quality Level
The [A Rec.Mode] menu appears.
Use the four-way controller (23) to select [Quality Level].
Press the four-way controller (5).
Storage Capacity
13
A pull-down menu appears.
Use the four-way controller (23)
to change the quality level.
Press the 4 button.
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
The Quality Level setting is saved.
MENU Cancel
8M
Auto
OK
OK
Press the 3 button.
The camera returns to capture status with the current setting.
If you use the [Quality Level] function frequently, you can save time
by assigning it to the Green button. (p.58)
Recorded Pixels and Quality Level of Still Pictures 1p.31
93
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Adjusting the White Balance
4
You can take pictures in natural colors by adjusting the white balance
according to the light conditions at the time of shooting.
Taking Pictures
White Balance
F
Auto
The camera adjusts the white balance automatically.
G
H
Daylight
Use this mode when taking pictures outside in sunlight.
Shade
Use this mode when taking pictures outside in the shade.
I
Tungsten Light
Use this mode when taking pictures under electric or other
tungsten light.
J
K
Fluores. Light
Use this mode when taking pictures under fluorescent light.
Manual
Use this mode when adjusting the white balance manually.
• Set another white balance if you are not satisfied with the color
balance of pictures taken with white balance set to AWB (Auto).
• Depending on the selected shooting mode, the white balance
setting may not be changed. Refer to p.186 - p.187 for details.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
4
Use the four-way controller (23) to select [White Balance].
Press the four-way controller (5).
The White Balance screen appears.
White Balance
Auto
Use the four-way controller (23)
to change the setting.
MENU Cancel
94
OK
OK
5
Press the 4 button.
The White Balance setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Refer to “Manual Setting” below for instructions on adjusting the white
balance manually.
If you use the [White Balance] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the White Balance 1p.106
Manual Setting
4
Have a blank sheet of white paper or similar material ready.
In the White balance screen, use the four-way controller
(23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button
fully.
White Balance
SHUTTER
MENU Cancel
Taking Pictures
1
Adjust
OK
OK
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec.Mode].
5
Press the 3 button.
The camera returns to capture status.
95
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the AE Metering
4
You can set the area of the screen where the brightness is metered to
determine the exposure.
AE metering
Taking Pictures
L
M
N
1
Multi-segment
metering
Centerweighted
metering
Spot AE
metering
The camera divides the image into 256 areas, meters the
brightness and determines the exposure.
The camera takes a reading of the overall brightness of the
picture with the center of the image having more influence on
the exposure.
The camera determines the exposure by metering the
brightness only at the center of the image.
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [AE Metering].
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the AE Metering setting.
5
Press the 4 button.
The AE Metering setting is saved.
6
Rec.Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU Cancel
Press the 3 button.
The camera returns to capture status with the current setting.
96
1/3
8M
AWB
OK
OK
• When the shutter release button is pressed halfway, the
brightness is metered and the exposure is determined.
• When the subject is outside the focusing area and you want to use
spot AE metering, aim the camera at the subject and press the
shutter release button halfway to lock the exposure, then compose
your picture again and press the shutter release button fully.
• If you use the [AE Metering] function frequently, you can save time
by assigning it to the Green button. (p.58)
• Depending on the selected shooting mode, the AE metering
setting may not be changed. Refer to p.186 - p.187 for details.
Saving the AE Metering 1p.106
4
Taking Pictures
97
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
4
Sensitivity
Taking Pictures
1
Auto
The sensitivity is automatically adjusted by the camera. (sensitivity 64 800)
64
100
200
400
800
1600
3200
6400
• The lower the sensitivity, the less noise that affects the image. The
shutter speed will be slower in low light conditions.
• Higher sensitivity settings use faster shutter speeds in low light
conditions to reduce camera shake, but the image may be affected by
noise.
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Sensitivity].
Press the four-way controller (5).
1/3
Rec.Mode
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
A pull-down menu appears.
The sensitivity setting is saved.
6
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
MENU Cancel
Press the 3 button.
The camera returns to capture status with the current setting.
98
Auto
64
100
200
400
OK
OK
• When Sensitivity is set to 3200 or 6400, the number of recorded
pixels is fixed at f.
• When the shooting mode is set to C (Movie), only Auto (sensitivity
64 - 800) is available.
• When the shooting mode is set to 4 (Digital SR), only Auto
(sensitivity 64 - 6400) is available.
• If you use the [Sensitivity] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the sensitivity 1p.106
4
Taking Pictures
99
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Autofocus Conditions
You can set various conditions for autofocus.
4
Setting the Focusing Area
Taking Pictures
You can change the autofocus area (Focusing Area).
Focusing Area
J Multiple
K Spot
W Automatic Tracking AF
1
2
3
4
5
6
Normal autofocus area
The autofocus area becomes smaller.
Keeps moving subjects in focus.
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
Use the four-way controller (23) to select [Focusing Area].
Press the four-way controller (5).
1/3
Rec.Mode
A pull-down menu appears.
Use the four-way controller (23)
to change the Focusing setting.
Press the 4 button.
The AF Setting is saved.
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
MENU Cancel
8M
AWB
AUTO
OK
OK
Press the 3 button.
The camera returns to capture status with the current setting.
• In Y (Frame Composite) mode, [Focusing Area] can only be set to
J (Multiple) or K (Spot).
• In b (Auto Picture) mode, [Focusing Area] is fixed at J (Multiple).
• If you use the [Focusing Area] function frequently, you can save
time by assigning it to the Green button. (p.58)
100
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Instant Review Time (Instant Review)
You can choose the Instant Review time (the length of time the image is
displayed immediately after capture) from 0.5sec, 1sec, 2sec, 3sec,
4sec, 5sec and Off (no display).
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the display time.
5
Press the 4 button.
The Instant Review setting is saved.
6
Rec.Mode
EV Compensation
Movie
Digital Wide
Digital Zoom
Instant Review
Memory
MENU Cancel
Taking Pictures
1
4
2/3
5sec
4sec
3sec
2sec
1sec
0.5sec
Off
OK OK
Press the 3 button.
The camera returns to capture status with the current setting.
Instant Review 1p.41
If the Face Recognition function worked when shooting, Blinking
Detection will operate during Instant Review (p.41).
101
MENU
Four-way controller
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Image Sharpness (Sharpness)
You can give the image sharp or soft outlines.
4
1
Press the 3 button in A mode.
Taking Pictures
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Sharpness].
Use the four-way controller (45)
to change the sharpness level.
The following setting is saved.
F (Soft)
G (Normal)
H (Hard)
4
Rec.Mode
3/3
Green Button
Sharpness
Saturation
Contrast
Date Imprint
MENU Exit
Press the 3 button.
The Sharpness setting is saved and the camera returns to capture
status.
If you use the [Sharpness] function frequently, you can save time by
assigning it to the Green button. (p.58)
102
MENU
Four-way controller
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Color Saturation (Saturation)
You can set the color saturation.
1
4
Press the 3 button in A mode.
2
3
Use the four-way controller (23) to select [Saturation].
Use the four-way controller (45)
to change the saturation level.
The following setting is saved.
F (Low)
G (Normal)
H (High)
4
Rec.Mode
3/3
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Taking Pictures
The [A Rec.Mode] menu appears.
MENU Exit
Press the 3 button.
The Saturation setting is saved and the camera returns to capture
status.
If you use the [Saturation] function frequently, you can save time by
assigning it to the Green button. (p.58)
103
MENU
Four-way controller
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Image Contrast (Contrast)
You can set the image contrast level.
4
1
Press the 3 button in A mode.
Taking Pictures
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Contrast].
Use the four-way controller (45)
to change the contrast level.
The following setting is saved.
F (Low)
G (Normal)
H (High)
4
Rec.Mode
3/3
Green Button
Sharpness
Saturation
Contrast
Date Imprint
MENU Exit
Press the 3 button.
The Contrast setting is saved and the camera returns to capture
status.
If you use the [Contrast] function frequently, you can save time by
assigning it to the Green button. (p.58)
104
MENU
Four-way controller
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Date Imprint Function
For choosing whether to imprint the date when taking still pictures.
1
4
Press the 3 button in A mode.
2
Use the four-way controller (23) to select [Date
Imprint].
3
Use the four-way controller (45)
to select O (On) or P (Off).
The selected setting is saved.
4
Press the 3 button.
Rec.Mode
3/3
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Taking Pictures
The [A Rec.Mode] appears.
MENU Exit
• O appears on the display when [Date Imprint] is set to O (On).
• The date imprinted with the Date Imprint function cannot be
deleted.
• The date is imprinted on the picture with the date style set in the
Date Adjust screen.
• Note that when the printer or the image editing software is set to
print the date, and when printing images with the date imprinted,
the date may be printed twice.
105
Saving the Settings (Memory)
4
Taking Pictures
106
The Memory function is for saving the current camera settings when the
camera is turned off.
For some camera settings, the Memory function is always set to O (On) (the
settings are saved when the camera is turned off), while for others you can
choose on or off (to choose whether the settings are saved or not when the
camera is turned off). The items which can be set to O (On) or P (Off) in the
Memory function are shown in the table below. (Items not listed here are
always saved in the selected settings when the camera is turned off.) If you
select O (On), the settings will be saved in the status they were in
immediately before the camera was turned off. If you select P (Off), the
settings will be reset to the defaults when the camera is turned off. The table
below also shows whether the Memory default setting for each item is on or
off.
Item
Description
A Face Recognition mode set by using the I button.
(p.56)
Flash Mode
The flash mode set with the four-way controller (4) (p.89)
The drive mode set with the four-way controller (2) (p.76,
Drive Mode
p.77)
Focus Mode
The focus mode set with the four-way controller (5) (p.87)
Zoom Position The zoom position set with the Zoom/w/x button (p.78)
The manual focus position set with the four-way controller
MF Position
(23) (p.88)
The [White Balance] setting on the [A Rec.Mode] menu
White Balance
(p.94)
Sensitivity
The [Sensitivity] setting on the [A Rec.Mode] menu (p.98)
EV
The [EV Compensation] setting on the [A Rec.Mode]
Compensation menu (p.84)
The [AE Metering] setting on the [A Rec.Mode] menu
AE Metering
(p.96)
The [Digital Zoom] setting on the [A Rec.Mode] menu
Digital Zoom
(p.80)
The display information display mode set with the 4/
DISPLAY
W button (p.85, p.121)
If a new SD Memory Card is inserted when On has been
File No.
selected, file numbers are assigned sequentially.
Face Priority
Default
Setting
P
O
P
P
P
P
P
P
P
P
O
P
O
MENU
Four-way controller
4 button
3 button
1
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Memory].
Press the four-way controller (5).
4
4
Use the four-way controller (23)
to choose an item.
5
Use the four-way controller (45)
to select O (On) or P (Off).
6
Press the 4 button.
The Memory setting is saved.
7
Memory
Taking Pictures
The Memory screen appears.
1/3
Face Priority
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
MENU Cancel
OK
OK
Press the 3 button.
The camera returns to capture status with the current setting.
107
Recording Movies
Shutter release
button
Zoom/ w/xbutton
Four-way controller
4 button
4
Recording a Movie
Taking Pictures
This mode enables you to record movies. Sound is recorded at the same time.
1
2
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
Use the four-way controller
(2345) to select C (Movie).
Movie
MENU
3
Press the 4 button.
1
Cancel
OK
OK
2 3
C (Movie) mode is selected and the
07:34
camera returns to capture status.
The following information appears on the
display.
1 Movie mode icon
2 Recording indicator (blinks during recording)
02/02/2008
3 Remaining recordable time
14:25
14
:25
4 Focus frame (does not appear during
5
4
recording)
5 Movie shake reduction function icon
You can change the captured area by pressing the Zoom/w/x button to
the left or right.
x : enlarges the subject
w : widens the area that is captured by the camera
108
4
Press the shutter release button fully.
Recording starts. Recording can continue until the built-in memory/SD
Memory Card is full, or the size of the recorded movie reaches 2 GB.
5
4
Taking Pictures
• The flash does not discharge in C mode.
• The focus mode can be changed before recording starts.
• When the Focus Mode is set to \(Manual Focus), you can adjust
the focus before recording starts.
• You can use the optical zoom only before recording, while the
digital zoom is available both before and during recording.
• Changing the display mode by pressing the
4/W button while recording a movie will not display the
histogram.
• When the shooting mode is set to C, Face Priority is automatically
set to on. You can select Smile Capture or Face Priority Off by
pressing the I button before starting recording a movie. (p.56)
When Smile Capture is activated, movie recording starts
automatically when the camera recognizes the subject's smile.
However, depending on the condition of the recognized faces,
movie recording may not start automatically because the Smile
Capture function will not work. If this happens, press the shutter
release button to start movie recording.
Press the shutter release button fully.
Recording stops.
Playing Back Movies 1p.125
Keeping the Shutter Release Button Pressed
If you keep the shutter release button pressed for more than one second,
recording will continue as long as you keep the button pressed. Shooting
stops when you take your finger off the shutter release button.
109
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Selecting the Recorded Pixels for Movies
4
Taking Pictures
You can choose from two recorded pixels settings for movies: m and
D.
The more pixels there are, the clearer the details and the bigger the file
size. The file size also varies depending on the quality level and frame
rate settings. (p.32)
Recorded Pixels for Movies
m (640×480) Suitable for viewing on a TV or computer screen.
D (320×240) Suitable for posting on a website or attaching to e-mail.
1
2
3
4
5
6
7
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The Movie screen appears.
Use the four-way controller (23) to select [Recorded Pixels].
Press the four-way controller (5).
Rec. time
15:02:26
A pull-down menu appears.
Use the four-way controller (23) to
change the number of recorded pixels.
Press the 4 button.
The Recorded Pixels setting is saved.
8
Recorded Pixels 640
320
Quality Level
Frame Rate
30fps
Color Mode
Full Color
Movie SR
MENU Cancel
Press the 3 button twice.
The camera returns to capture status with the current setting.
Recorded Pixels, Quality Level and Frame Rate of Movies 1p.32
110
OK
OK
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Selecting the Quality Level of Movies
You can set the quality level of movies. The higher the quality level, the
clearer the details and the bigger the file size.
C
1
Best
D
Better
E
Good
Clearer images with larger file size
Grainier images with smaller file size
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
4
Taking Pictures
Quality level of movies
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The Movie screen appears.
4
5
Use the four-way controller (23) to select [Quality Level].
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23)
to change the quality level.
7
Press the 4 button.
The Quality Level setting is saved.
8
Rec. time
Recorded Pixels
Quality Level
Frame Rate
Color Mode
Movie SR
07:30:06
640
MENU Cancel
OK
OK
Press the 3 button twice.
The camera returns to capture status with the current setting.
Recorded Pixels, Quality Level and Frame Rate of Movies 1p.32
111
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Selecting the Frame Rate
4
Taking Pictures
You can choose from two frame rates (number of frames per second) for
movies: 30fps (frames per second) and 15fps. The more frames per
second, the better the quality of the movie, but the file size becomes
larger.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The Movie screen appears.
4
Use the four-way controller (23) to select [Frame
Rate].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23)
to select [30fps] or [15fps].
7
Press the 4 button.
The Frame Rate setting is saved.
8
Rec. time
15:02:26
Recorded Pixels 640
Quality Level
30fps
Frame Rate
15fps
Color Mode
Movie SR
MENU Cancel
Press the 3 button twice.
The camera returns to capture status with the current setting.
Recorded Pixels, Quality Level and Frame Rate of Movies 1p.32
112
OK
OK
MENU
Four-way controller
4 button
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Recording Movies in Black and White or Sepia
Tones (Color Mode)
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The Movie screen appears.
4
Use the four-way controller (23) to select [Color
Mode].
5
Press the four-way controller (5).
A pull-down menu appears.
6
Use the four-way controller (23)
to choose a color.
7
Press the 4 button.
The Color Mode setting is saved.
8
4
Taking Pictures
In C (Movie) mode, you can set the color mode to black and white or
sepia, as well as full color.
Movie
Recorded Pixels
Quality Level
Frame Rate
Color Mode
Movie SR
640
30fps
Full Color
B&W
Sepia
MENU Cancel
OK
OK
Press the 3 button twice.
The camera returns to capture status with the current setting.
The color mode setting for a recorded movie cannot be changed.
113
MENU
Four-way controller
3 button
Rec.Mode
1/3
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
8M
AWB
Auto
MENU Exit
Setting the Movie SR (Movie Shake Reduction)
Function
4
Taking Pictures
In C (Movie) mode, you can compensate for camera shake while you
are recording movies with the Movie SR (Movie Shake Reduction)
function.
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
3
Use the four-way controller (23) to select [Movie].
Press the four-way controller (5).
The Movie screen appears.
4
5
Use the four-way controller (23) to select [Movie SR].
Use the four-way controller (45)
to select O (On) or P (Off).
The Movie SR (Movie Shake Reduction)
setting is saved.
6
Press the 3 button twice.
The camera returns to capture status with
the current setting.
114
Movie
Recorded Pixels 640
Quality Level
30fps
Frame Rate
Full Color
Color Mode
Movie SR
MENU
Playing Back and Deleting Images
Playing Back Images
Switching Between A Mode and Q Mode
In this manual, the capture mode, such as for taking still pictures, is
referred to as [A mode]. The playback mode, such as for displaying
captured images on the display, is referred to as [Q mode]. In Q
mode, you can perform simple editing operations on the images that are
played back.
Follow the procedure below to switch between A mode and Q mode.
To Switch from A Mode to Q Mode
1
Press the Q button.
The camera switches to Q mode.
To Switch from Q Mode to A Mode
Press the Q button or shutter release button halfway.
The camera switches to A mode.
Displaying data in the built-in memory
When an SD Memory Card is inserted in the camera, images, movies,
and sounds on the SD Memory Card are displayed. If you want to
display images, movies, and sounds in the built-in memory, remove the
SD Memory Card.
[Viewing images in the built-in memory while the SD Memory Card is
inserted (built-in memory display)]
• When switching from A mode to Q mode, you can display images,
movies, and sounds in the built-in memory while the SD Memory Card is
inserted by pressing the Q button for more than one second.
• In built-in memory display, you can play back still pictures (including enlarged
display) (p.42, p.118), movies (p.125), and sounds (p.159), and switch between
nine-image display, folder display, and calendar display (p.117).
• In built-in memory display, you cannot delete data, delete a selection,
display the Playback Mode Palette, or display the menu. If you want to
perform any of these operations on images, movies, or sounds in the builtin memory, do so after removing the SD Memory Card.
5
Playing Back and Deleting Images
1
Playing Back Still Pictures
Refer to “Playing Back Images” (p.42) for instructions.
115
Zoom/f/y button
Q button
Four-way controller
4 button
3 button
Nine-Image Display, Folder Display and Calendar
Display
Nine-Image Display
You can display nine thumbnails of captured images at a time.
5
1
Playing Back and Deleting Images
In Q mode, press f on the Zoom/
f/y button.
Frame
1
A page consisting of nine thumbnail images
appears. The displayed images change
nine at a time page by page.
Use the four-way controller (2345) to
2
move the frame. When 10 or more images
Select & Delete
100-0010
have been saved, if you choose image 1
and press the four-way controller (24), the previous page appears.
Similarly, if you choose image 2 and press the four-way controller
(35), the next page appears.
The icons that appear on the images indicate the following:
No icon
: Still picture without sound
P
: Still picture that can have camera shake
corrected
O (with image)
: Still picture with sound
C
: Movie (the first frame appears)
O (without image) : Sound file only
Press the 4 button, 3 button or y on the Zoom/f/y button
to switch to single-image display of the selected image.
Press the Q button to switch to A mode.
116
Switching to Folder Display or Calendar Display
In nine-image display, press f on the Zoom/f/y button to switch to
folder display or calendar display. Press the Green button to switch
between folder display and calendar display.
1
In Q mode, press f on the Zoom/f/y button.
The screen changes to nine-image display.
2
Press f on the Zoom/f/y button.
The screen changes to folder display or calendar display.
Folder display
Frame
100
101
103
104
102
5
100-0010
Calendar display
Recorded images and sound files are
Frame
displayed by date in calendar format.
SUN MON TUE WED THU FRI SAT
The first image recorded on a date is
1
2
displayed for that date on the calendar.
4
6
8
9
3
7
5
10
11
12
13
14
15
26
O appears for dates on which a sound file
17
18
19
20
21
22
23
was the first recorded file.
28
24
25
29
26
27
Use the four-way controller (2345) to
02/2008
move the frame.
Press y on the Zoom/f/y button to
display the images for a date in nine-image display.
Select a date and press the 4 button to switch to single-image
display of the first image recorded on that date.
Playing Back and Deleting Images
The list of folders with recorded images and
sound files appears.
Use the four-way controller (2345) to
move the frame.
Press the 4 button or y on the Zoom/f/
y button to display the images in the
selected folder in nine-image display.
• Press the 3 button in folder display or calendar display to
switch to normal nine-image display.
• Press the Q button or half-press the shutter release button in
folder display or calendar display to switch to A mode.
117
Zoom/f/y button
Q button
Four-way controller
4 button
Zoom Playback
You can magnify an image up to eight times. A guide showing the center
of the magnified portion of the image appears on the display during zoom
playback.
5
Playing Back and Deleting Images
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
2
Press y on the Zoom/f/y button.
The image is magnified (×1.1 to ×8).
Holding down y on the Zoom/f/y button
changes the magnification continuously.
When the Quick Zoom function (p.176) is
set to O, you can magnify the image at a
maximum of ×8 simply by pressing y once.
You can use the guide at the bottom left of
the screen to check which portion of the
image is magnified.
2.0×
2.0
Guide
The following operations can be performed while the magnified
image is displayed.
Four-way controller (2345) Moves the position to be magnified
Zoom/f/y button (y)
Makes the image bigger (max. ×8)
Zoom/f/y button (f)
Makes the image smaller (min. ×1.1)
3
Press the 4 button.
The image returns to single-image display.
• Movies cannot be magnified.
• The guide does not appear if the display mode is set to “No Info”.
118
I button
Zoom/f/y button
Q button
Four-way controller
4 button
Zoom Up On the Subject’s Face Automatically
(Face Close-up Playback)
You can enjoy playing back images with the subject’s faces zoomed up
simply by pressing the I button (Face close-up playback) if Face
Recognition operated when the images were taken.
Enter the Q mode and use the four-way controller
(45) to choose the image you want to magnify.
2
Confirm that the I icon is displayed in the image and
press the I button.
The image is magnified around the face first
recognized when the image was taken.
If multiple faces were recognized when the
image was taken, the subject’s faces are
zoomed up on each time the I button is
pressed in order of the recognition during
shooting.
3
5
1/2
2/2
Playing Back and Deleting Images
1
Press the 4 button.
The image returns to single-image display.
119
• The magnification ratio for Face close-up playback may differ
depending the conditions such as the size of the face recognized
when shooting.
• Press y on the Zoom/f/y button during Face close-up
playback to switch to the zoom playback; the image is displayed
at an equal or slightly larger magnification ratio. Press f on the
Zoom/f/y button to switch to the zoom playback; the image is
displayed at an equal or slightly smaller magnification ratio.
5
Playing Back and Deleting Images
120
Displaying Shooting Information in Playback
Mode
Shooting information can be displayed on the display in Q mode.
Pressing the 4/W button changes the display mode.
Refer to p.20 for details of each display mode.
Normal Display
100 - 0026
02/02/2008
14:25
OK
Movie
Histogram +
Info
8M
OK
200
1/250
F3.5
02/02/2008
14:25
OK
No Info
5
Playing Back and Deleting Images
100 - 0026
Displaying Shooting Information in Capture Mode 1p.85
121
Digital SR
Zoom/f/y
button
Q button
Four-way controller
4 button
Green button
MENU
Cancel
OK
OK
Correcting Camera Shake with Digital SR
For correcting the camera shake in recorded images.
1
2
5
Playing Back and Deleting Images
3
Enter the Q mode and use the four-way controller (45)
to choose the image to correct camera shake for.
Press the four-way controller (3).
The Playback Mode Palette appears.
4
Use the four-way controller (2345) to select P
(Digital SR).
Press the 4 button.
100-0001
5
Press the 4 button.
6
7
The image to correct is displayed.
When an image is protected, the image will
be saved as a new image without the
confirmation dialog displayed on the screen.
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Press the 4 button.
The corrected image is saved in the built-in
memory or SD Memory Card.
Executes shake reduction
processing on this image
MENU
Cancel
OK
OK
OK
OK
Overwrite
original image?
Overwrite
Save as
Cancel
• If you overwrite the image, the shake information is lost, and you
cannot perform shake correction again.
• P appears on the upper left of the display only when playing back
images for which camera shake can be corrected. However, camera
shake may not be corrected when the camera shake is too extreme.
In such cases, the error message will appear in Step 5.
122
Slideshow
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Slideshow
You can play back recorded images one after another.
1
Enter the Q mode and use the four-way controller
(45) to choose an image to start the slideshow with.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
Use the four-way controller (2345) to select u
(Slideshow).
4
Press the 4 button twice.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow.
To resume the slideshow, press the 4 button while the slideshow is
paused.
5
Press any button other than the 4 button.
The slideshow stops.
Setting the Slideshow Conditions
You can set the playback interval and also a screen effect and sound
effect for when one image changes to the next.
1
Playing Back and Deleting Images
3
5
Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to select u
(Slideshow).
123
3
Press the 4 button.
The screen for setting the slideshow
conditions appears.
4
5
Use the four-way controller (23)
to select [Interval].
Press the four-way controller (5).
Interval
Screen Effect
Sound Effect
MENU
3sec
Wipe
OK
Start
A pull-down menu appears.
6
Use the four-way controller (23) to change the interval
and press the 4 button.
You can choose from 3sec, 5sec, 10sec, 20sec, and 30sec.
7
Use the four-way controller (23) to select [Screen Effect].
After selecting [Screen Effect], press the four-way controller (5). A pulldown menu appears with the following items that can be selected. Use
the four-way controller (23) to select an item and press the 4 button.
Wipe
Checker
Fade
Off
5
Playing Back and Deleting Images
8
9
The next image slides over the previous one from left to right
The next image appears in small square mosaic blocks
The current image gradually fades out and the next image fades in
No effect
Use the four-way controller (23) to select [Sound Effect].
Use the four-way controller (45) to select O (On) or P (Off).
Except when the screen effect is set to Off, you can choose O (On) or
P (Off) for the sound that is played when one image changes to the next.
10
Press the 4 button.
The slideshow starts using the selected interval and effect.
• The slideshow will continue until you press any button other than
the 4 button.
• Movies or pictures with sound will normally be played through to the
end before the next picture is played back, regardless of the interval
setting. However, pressing the four-way controller (5) while playing
back a movie or a picture with sound skips to the next image.
• Sound files made in O (Voice Recording) mode are not played
back in the slideshow.
• Panorama images will be scrolled for display from left to right in 4 seconds
before the next picture is played back, regardless of the settings of
[Interval] or [Screen Effect].
Connecting the Camera to AV Equipment 1p.126
124
Playing Back Movies
Zoom/f/y button
Q button
Four-way controller
Playing Back a Movie
You can play back the movies you have taken. Sound is played back at
the same time.
Enter the Q mode and use the
four-way controller (45) to
choose the movie you want to play
back.
2
Press the four-way controller (2).
5
100 - 0017
00:30
02/02/2008
14:25
Playback starts.
The following operations can be performed during playback.
Four-way controller (4) Plays back in reverse
Four-way controller (2) Pauses playback
Zoom/f/y button (y) Increases the volume
Zoom/f/y button (f) Reduces the volume
The following operations can be performed while playback is
paused.
Four-way controller (4) Reverses the frame
Four-way controller (5) Forwards the frame
Four-way controller (2) Releases the Pause function (Play)
3
Playing Back and Deleting Images
1
Press the four-way controller (3).
Playback stops.
125
Connecting the Camera to AV
Equipment
External Input
Terminal
PC/AV
terminal
Terminal cover
5
yellow
white
By using the supplied AV cable (I-AVC7), you can capture and play back
images on equipment with a video IN jack, such as a TV. Make sure the
camera and TV are turned off before connecting the camera to the TV.
Playing Back and Deleting Images
1
Open the terminal cover and connect the AV cable to
the PC/AV terminal.
Connect the terminal of the AV cable with
on the PC/AV terminal of the camera.
2
pointing toward the 4
Connect the other ends of the AV cable (yellow: video,
white: audio) to the video input terminal and audio input
terminal of the AV device.
When using stereo sound equipment, insert the sound terminal into the
L (white) terminal.
3
Turn the AV device on.
When the device that the camera is connected to and the device that
plays back images are different, turn both devices on.
When viewing images on AV equipment with multiple video input
terminals (such as a TV), refer to the operation manual of the device
and select the video input terminal to which the camera is connected.
4
126
AUDIO
VIDEO (L)
(R)
Turn the camera on.
• You are recommended to use the AC adapter kit K-AC78 (optional) if you
intend to use the camera for a long time.
• Depending on the country or region, images and sound files may fail to be
played back if the video output format is set different from the one in use
there. If this happens, change the video output format setting. (p.172)
• The camera display turns off while the camera is connected to AV
equipment.
• Volume cannot be adjusted with the zoom button while the camera is
connected to AV equipment.
5
Playing Back and Deleting Images
127
Deleting Images
Q button
Four-way controller
4 button
i button
Delete images and sounds with mistakes or that are unnecessary.
5
Playing Back and Deleting Images
When images or sounds are inadvertently deleted
Deleted images and sounds can be recovered with the Optio M50. (p.133)
Deleted images and sounds can be recovered even if the camera has been
turned off after deletion as long as the SD Memory Card has not been removed.
However, deleted images and sounds cannot be recovered after operations to
write data such as taking pictures, recording movies, protecting images, saving
DPOF settings, resizing images, or cropping images have been performed.
Deleting a Single Image/Sound File
You can delete a single image or sound file.
Protected images and sound files cannot be deleted. (p.134)
1
2
3
4
Enter the Q mode and use the four-way controller
(45) to choose the image/sound file you want to delete.
Press the i button.
A confirmation screen appears.
Use the four-way controller (23)
to select [Delete].
Press the 4 button.
The image or sound file is deleted.
100 - 0017
Delete
Cancel
All Images/Sounds
OK
OK
If you press the i button during Instant Review, the screen in Step 2
appears, enabling you to delete the image you have just taken. (p.43)
Recovering Deleted Images 1p.133
128
Deleting a Sound File
If sound has been recorded with an image (p.160), you can delete the
sound without deleting the image.
1
Enter the Q mode and use the four-way controller
(45) to choose an image with sound.
2
Press the i button.
A confirmation screen appears.
3
Use the four-way controller (23)
to select [Delete Sound].
4
Press the 4 button.
The sound file is deleted.
100 - 0017
Delete Sound
Delete
Cancel
All Images/Sounds
OK
OK
5
Playing Back and Deleting Images
Select [Delete] in Step 3 above to delete both the image and sound
file.
129
Zoom/f/y button
Q button
Four-way controller
4 button
i button
Deleting Selected Images and Sound Files
(from Nine-Image Display)
You can delete several images/sound files selected from the nine-image
display at once.
Protected images and sound files cannot be deleted.
5
Playing Back and Deleting Images
130
1
In Q mode, press f on the Zoom/
f/y button.
Nine thumbnail images appear.
2
Press the i button.
P appears on the images and sound files.
Select & Delete
3
100-0010
Use the four-way controller
(2345) to choose the images
and sound files that you want to
delete and press the 4 button.
O appears on the selected images and
MENU Cancel
OK
Delete
sound files.
If you select an image and press y on the
Zoom/f/y button, the selected image appears in single-image display
as long as the button is pressed, enabling you to check whether you
really want to delete it or not. (The display returns to the nine-image
display when you release the button.) However, protected images
cannot be displayed in single-image display.
4
Press the i button.
A confirmation dialog appears.
5
6
Delete all selected
images/sounds
Use the four-way controller (23)
to select [Select & Delete].
Press the 4 button.
The selected images and sound files are
deleted.
Select & Delete
Cancel
MENU
OK
OK
5
Playing Back and Deleting Images
131
Q button
Four-way controller
4 button
i button
Deleting All Images and Sound Files
You can delete all the images and sound files at once.
Protected images and sound files cannot be deleted. (p.134)
5
Playing Back and Deleting Images
132
1
Press the i button in Q mode.
A confirmation dialog appears.
2
Press the i button.
A confirmation dialog appears.
3
Use the four-way controller (23)
to select [Delete All].
4
Press the 4 button.
Delete all images/sounds
All the images and sound files are deleted.
Delete All
Cancel
MENU
Recovering Deleted Images 1p.133
OK
OK
Image Recovery
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Recovering Deleted Images
You can recover images or sound files that were taken with this camera
and then deleted.
1
After deleting a file, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to select ]
(Image Recovery).
3
Press the 4 button.
The number of recoverable images
appears.
4
Use the four-way controller (23)
to select [Recover].
5
Press the 4 button.
5 images
Want to recover?
Recover
Cancel
OK
5
Playing Back and Deleting Images
After deleting an image, once operations to write data such as taking
pictures, recording movies, protecting images, saving DPOF
settings, resizing images, or cropping images have been performed,
or the SD Memory Card has been removed, the message [No image
to be processed] appears in Step 3 and the deleted images and
sound files cannot be recovered.
OK
Deletion of the images is cancelled and the files are recovered.
• Recovered images and sound files have the same file name as
before they were deleted.
• Up to a maximum of 999 deleted image files can be recovered.
133
Protect
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Protecting Images and Sound Files from Deletion
(Protect)
You can protect stored images and sound files from being accidentally deleted.
5
Playing Back and Deleting Images
1
Press the four-way controller (3) in Q mode.
2
3
Use the four-way controller (2345) to select Z (Protect).
Press the 4 button.
4
5
6
7
The Playback Mode Palette appears.
The screen for selecting [Single Image/
Sound] or [All Images/Sounds] appears.
Use the four-way controller (23)
to select [Single Image/Sound].
Press the 4 button.
Single Image/Sound
All Images/Sounds
Cancel
OK
OK
The message [Protect this image/sound]
appears.
To protect another image or sound file, use the four-way controller
(45) to select another image or sound file.
Use the four-way controller (23)
to select [Protect].
Press the 4 button.
The selected image or sound file is protected.
100 - 0017
Protect this image/sound
Protect
Unprotect
Cancel
OK
OK
• To cancel the Protect setting, select [Unprotect] in Step 6.
• Y appears below the file number on protected images and sound
files during playback.
• You can protect another image or sound file by further performing
the above 5, 6, and 7 Steps. However, the maximum number you
can protect in succession by the above Steps cannot exceed 99.
134
Protect
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Protecting All Images and Sound Files
1
Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to select Z
(Protect).
3
Press the 4 button.
4
Use the four-way controller (23)
to select [All Images/Sounds].
5
Single Image/Sound
All Images/Sounds
Cancel
OK
5
OK
Press the 4 button.
The screen for selecting [Protect] or
[Unprotect] appears.
6
Use the four-way controller (23)
to select [Protect].
7
Press the 4 button.
Protect all images/sounds
Protect
Unprotect
Cancel
OK
All the images and sound files are protected.
OK
Playing Back and Deleting Images
The screen for selecting [Single Image/
Sound] or [All Images/Sounds] appears.
Protected images and sound files will be deleted when the SD
Memory Card or built-in memory is formatted.
To cancel the Protect setting on all your images and sound files,
select [Unprotect] in Step 6.
135
Editing and Printing Images
Editing Images
Resize
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Changing the Image Size and Quality (Resize)
By changing the size and quality of a selected image, you can make the file size
smaller than the original. You can use this function to continue taking pictures
when the SD Memory Card or built-in memory is full, by making the images
smaller and overwriting the original images to make more space available.
• Movies cannot be resized.
• You cannot select a larger resolution or higher quality than that of
the original image.
6
Editing and Printing Images
1
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to resize.
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select n
(Resize).
4
Press the 4 button.
The screen for choosing the size and quality
appears.
5
Select [Recorded Pixels] and
[Quality Level].
Recorded Pixels
Quality Level
7M
Cancel
OK
Use the four-way controller (45) to choose
the size and quality.
Use the four-way controller (23) to switch between [Recorded Pixels]
and [Quality Level].
MENU
136
OK
6
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When an image is protected, the image will be saved as a new image
without the confirmation dialog displayed on the screen.
7
Use the four-way controller (23)
to select [Overwrite] or [Save as].
8
Press the 4 button.
The resized image is saved.
Overwrite
original image?
Overwrite
Save as
Cancel
OK
OK
6
Editing and Printing Images
137
Cropping
Zoom/f/y
button
Q button
Four-way controller
4 button
Green button
MENU
Cancel
OK
OK
Cropping Images
You can delete the unwanted part of a picture and save the cropped
image as a separate image.
1
6
2
Enter the Q mode and use the four-way controller
(45) to choose the image you want to trim.
Press the four-way controller (3).
3
4
Use the four-way controller (2345) to select o (Cropping).
Press the 4 button.
Editing and Printing Images
5
The Playback Mode Palette appears.
The cropping screen appears.
The maximum range for cropping is shown
with a green frame on the screen. Cropping
cannot be performed inside of this area.
Choose the cropping conditions.
OK
OK
The following operations move the green frame
and set the area for cropping on the screen.
Zoom/f/y button
Changes the size of the cropped section
Four-way controller
Moves the cropping position up, down, left
(2345)
and right
Green button
Rotates the cropping frame
6
Press the 4 button.
The cropped image is saved with a new file name.
The cropped image is saved in the same quality as the original image.
The number of recorded pixels is selected automatically according to
the size of the cropped section.
Movies cannot be cropped.
138
MENU
Cancel
Image/Sound Copy
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Copying Images and Sound Files
You can copy images and sound files from the built-in memory to the SD
Memory Card and vice versa. This function can only be selected when
an SD Memory Card has been inserted in the camera.
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
1
Press the four-way controller (3) in Q mode.
The Playback Mode Palette appears.
6
Use the four-way controller (2345) to select p
(Image/Sound Copy).
3
Press the 4 button.
The copying method selection screen appears.
To Copy Files from the Built-in Memory to the SD Memory Card
All the images and sound files in the built-in memory are copied to the
SD Memory Card at once. Before copying the images, make sure that
there is enough space on the SD Memory Card.
4
Use the four-way controller (23)
to select [2}{].
5
Press the 4 button.
All the images and sound files are copied.
Editing and Printing Images
2
SD
SD
Cancel
OK
OK
139
To Copy Files from the SD Memory Card to the Built-in Memory
Selected images and sound files from the SD Memory Card are copied
to the built-in memory one at a time.
4
Use the four-way controller (23)
to select [{}2].
5
6
Press the 4 button.
7
Press the 4 button.
Use the four-way controller (45)
to select the file you want to copy.
100 - 0017
Copy this image/sound
MENU Cancel
OK
OK
The selected image/sound file is copied.
• If sound has been recorded with the image, the sound file is copied
with the image.
• When a file is copied from the SD Memory Card to the built-in
memory, it is assigned a new file name.
6
Editing and Printing Images
140
Digital Filter
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Using the Digital Filters
This mode lets you change the color tones and perform special
processing on a selected image.
Digital Filters
Processes the image using the selected filter. You can choose from
two filters: B&W and sepia.
Processes the image using the selected color filter. You can choose
Color filter
from six filters: red, pink, purple, blue, green, and yellow.
Processes the image using the selected color extraction filter. You
Color
extraction filter can choose from three filters: Red,Green, and Blue.
B&W/sepia
filter
Soft filter
Processes the image into a soft image with the entire image blurred.
Editing and Printing Images
Brightness Filter Adjusts the brightness of the image.
1
2
3
4
Enter the Q mode and use the four-way controller
(45) to choose the image you want to edit.
Press the four-way controller (3).
The Playback Mode Palette appears.
Use the four-way controller
(2345) to select D (Digital
Filter).
Press the 4 button.
The digital filter selection screen appears.
1 B&W/sepia filter
2 Color filter
3 Color extraction filter
4 Soft filter
5 Brightness Filter
4 3 2 1
MENU Cancel
OK
6
OK
5
141
To Select a B&W/sepia filter or the Soft Filter
5
6
7
8
Use the four-way controller (23) to choose a digital
filter.
You can preview the results of the filter effect.
Press the 4 button.
A confirmation dialog for overwriting the
image appears.
When an image is protected, the image will be
saved as a new image without the
confirmation dialog displayed on the screen.
Overwrite
original image?
Overwrite
Save as
Cancel
OK
Use the four-way controller (23)
to select [Overwrite] or [Save as].
Press the 4 button.
OK
Images processed with a B&W/sepia filter or the soft filter are recorded
with the same number of recorded pixels and quality level as the
original image.
6
To Select a Color filter or the Color Extraction Filter
Editing and Printing Images
5
Use the four-way controller (23) to choose a digital
filter.
6
Use the four-way controller (45) to adjust the effect.
7
The color extraction filter changes in the following sequence each time
you press the four-way controller (5): Green, Blue, Red.
Press the 4 button.
A confirmation dialog for overwriting the
image appears.
When an image is protected, the image will be
saved as a new image without the
confirmation dialog displayed on the screen.
8
Use the four-way controller (23)
to select [Overwrite] or [Save as].
9
Press the 4 button.
Overwrite
original image?
Overwrite
Save as
Cancel
OK
OK
Images processed with a color filter or the color extraction filter are
recorded with the same number of recorded pixels and quality level as
the original image.
142
To Select the Brightness Filter
5
Use the four-way controller (23) to select the digital
filter you want to use.
6
Use the four-way controller (45)
to adjust the effect.
The brightness increases each time you
press the four-way controller (5) and
decreases each time you press the fourway controller (4).
7
MENU Cancel
OK
OK
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When an image is protected, the image will be saved as a new image
without the confirmation dialog displayed on the screen.
8
Use the four-way controller (23) to select [Overwrite]
or [Save as].
9
Press the 4 button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
Editing and Printing Images
Movies or images taken with another camera cannot be edited using
[Digital Filter]. An error message appears if you choose this function
from the Playback Mode Palette and press the 4 button.
6
143
Red-eye Compensation
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Red-eye Compensation
You can correct images where the flash has caused the subject to
appear with red eyes.
1
Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
6
Editing and Printing Images
3
Use the four-way controller (2345) to select Z (Redeye Compensation).
4
Press the 4 button.
A confirmation dialog for overwriting the
image appears.
When an image is protected, the image will be
saved as a new image without the
confirmation dialog displayed on the screen.
5
Use the four-way controller (23)
to select [Overwrite] or [Save as].
6
Press the 4 button.
Overwrite
original image?
Overwrite
Save as
Cancel
OK
OK
The edited image is saved with the same number of recorded pixels
and quality level as the original.
• The red-eye compensation function cannot be used on movies or
on images where red eyes cannot be detected on the camera. An
error message appears in Step 4.
• The red-eye compensation function can only be used with still
pictures taken with this camera.
144
Frame Composite
Zoom/f/y
button
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Adding a Frame (Frame Composite)
This function lets you add a decorative frame to still pictures. There are
three frames already stored in the camera.
1
Enter the Q mode and use the four-way controller (45)
to choose the image to which you want to add a frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
Use the four-way controller (2345) to select Y
(Frame Composite).
4
Press the 4 button.
6
A 9-frame display of the frame selection
screen appears.
5
Use the four-way controller
(2345) to choose a frame.
6
Press y on the Zoom/f/y
button.
OK
OK
The selected frame appears in single-image
display.
You can choose another frame using either
of the following operations.
OK OK
• Use the four-way controller (45) to
choose a different frame.
• Press f on the Zoom/f/y button to return to the 9-frame display
of the frame selection screen, and then perform Step 5 to choose a
different frame.
Editing and Printing Images
3
145
7
Press the 4 button.
The frame position and size adjustment
screen appears. Use the four-way controller
(2345) to adjust the position of the
image, and use the Zoom/f/y button to
make the image larger or smaller.
8
MENU
OK
Cancel
OK
Press the 4 button.
A confirmation dialog for overwriting the
image appears.
When an image is protected, the image will be
saved as a new image without the
confirmation dialog displayed on the screen.
9
Use the four-way controller (23)
to select [Overwrite] or [Save as].
10
Press the 4 button.
Overwrite
original image?
Overwrite
Save as
Cancel
OK
OK
The edited image is saved with the recorded pixels of h.
6
Editing and Printing Images
146
The Frame Composite function cannot be used on movies or images
of size i or smaller. An error message appears in Step 4.
Using a New Frame
Frames downloaded from a PENTAX website or other source can be
used when adding a frame to pictures. To display the frames available
in the built-in memory or the SD Memory Card, in Step 3, select Y
(Frame Composite) and press the 4 button.
• The three frames stored in the internal memory cannot be deleted.
• Up to 96 downloaded frames can be displayed. Including the three
frames already stored in the internal memory, you can choose
from up to 99 frames.
• Extract the downloaded frame and copy it to the FRAME folder in
the Built-in memory or SD Memory Card.
• The FRAME folder is created when the built-in memory or SD
Memory Card is formatted with this camera.
How to display the Movie Edit menu
Movie Edit
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Editing Movies
You can select a frame from a recorded movie to save as a still picture
or divide a movie into two.
1
Enter the Q mode and use the four-way controller
(45) to choose the movie you want to edit.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
Use the four-way controller (2345) to select [
(Movie Edit).
4
Press the 4 button.
The movie edit selection screen appears.
Go to the following pages.
• Saving a Frame from a Movie as a Still
Picture
• “Dividing a Movie” (p.148)
6
Save as Still image
Divide Movies
Cancel
OK
OK
Protected movies cannot be divided.
Editing and Printing Images
3
Saving a Frame from a Movie as a Still Picture
5
Select [Save as Still image] on the movie edit selection
screen.
147
6
Press the 4 button.
The screen appears for selecting a frame to
be saved as a still picture.
7
Use the four-way controller
(2345) to choose the frame you
want to save.
2
3
4
5
8
:
:
:
:
100 - 0042
00:06
Select image to save
1
MENU Cancel
OK
OK
Plays or pauses the movie
Stops the movie and returns to the first frame
Reverses the movie frame by frame
Advances the movie frame by frame
Press the 4 button.
The selected frame is saved as a still picture.
Dividing a Movie
5
6
Select [Divide Movies] on the movie edit selection screen.
Press the 4 button.
100 - 0042
00:09
The screen for choosing the dividing
position appears.
6
Editing and Printing Images
7
Use the four-way controller
(2345) to determine the
dividing position.
2
3
4
5
8
:
:
:
:
Select image for
dividing position
1
MENU Cancel
OK
OK
Plays or pauses the movie
Stops the movie and returns to the first frame
Reverses the movie frame by frame
Advances the movie frame by frame
Press the 4 button.
A confirmation dialog appears.
9
10
Use the four-way controller (23)
to select [Divide].
Press the 4 button.
Divide at this position?
Divide
Cancel
OK
OK
The movie is divided at the specified
position, the two portions are saved as new files, and the original one
is deleted.
148
Setting the Printing Service (DPOF)
DPOF (Digital Print Order Format) is the format for storing print order
data on still pictures captured with a digital camera. Once the print order
data has been stored, the pictures can be printed according to the DPOF
settings using a DPOF-compatible printer or photo processing lab.
You cannot store print order data for movies or sound-only files.
DPOF
Q button
Four-way controller
4 button
Green button
MENU
Cancel
OK
OK
Printing Single Images
Set the following items for each image.
1
6
Choose the number of copies up to 99.
Specify whether you want the date inserted on the print or not.
Editing and Printing Images
Copies
Date
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller (2345) to select r
(DPOF).
3
Press the 4 button.
The screen for selecting [Single Image] or
[All Images] appears.
4
Use the four-way controller (23)
to select [Single Image].
Single Image
All Images
Cancel
OK
OK
149
5
Press the 4 button.
100 - 0017
The message [DPOF setting for this image]
DPOF setting for
appears.
this image
To make DPOF settings for another image,
00
Copies
use the four-way controller (45) to select
Date
Date
another image.
MENU Cancel
OK OK
If DPOF settings have already been made
for an image, the previous number of copies and date setting (O or P)
will be displayed.
6
Use the four-way controller (23) to choose the number
of copies.
7
Use the Green button to choose
whether to insert the date or not.
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
To continue setting DPOF print order data,
use the four-way controller (45) to choose
another image and repeat Steps 6 and 7.
6
Editing and Printing Images
150
8
100 - 0017
DPOF setting for
this image
Copies
Date
01
Date
MENU Cancel
OK
OK
Press the 4 button.
The DPOF settings are saved and the screen returns to the DPOF
menu.
• Depending on the printer or printing equipment at the photo
processing lab, the date may not be imprinted on the pictures even
if O (On) was selected in the DPOF settings.
• If the picture already has the date imprinted on it (p.105), do not
set Date O (On) in DPOF settings. Otherwise, the date could be
imprinted twice on your printed picture.
To cancel DPOF settings, set the number of copies to [00] in Step 6
and press the 4 button.
DPOF
Q button
Four-way controller
4 button
Green button
MENU
Cancel
OK
OK
Printing All Images
When you choose the number of copies and whether or not to insert the
date, the settings are applied to all the images stored in the camera.
1
Display the screen for DPOF settings in Q mode.
Refer to Steps 1 to 3 on p.149.
2
3
Use the four-way controller (23) to select [All Images].
Press the 4 button.
The message [DPOF setting for all images]
appears.
Choose the number of copies and
whether to insert the date or not.
Refer to Steps 6 and 7 in “Printing Single
Images” (p.150) for details of how to make
the settings.
5
Copies
Date
Date
MENU Cancel
01
OK
OK
Press the 4 button.
The DPOF settings for all the images are saved and the camera
returns to the DPOF setting screen.
• The number of copies specified in the DPOF settings applies to all
the images. Before printing, check that the number is correct.
• If the pictures already have the date imprinted on them (p.105), do
not set Date O (On) in DPOF settings. Otherwise, the date could
be imprinted twice on your printed pictures.
Editing and Printing Images
4
6
DPOF setting for
all images
Settings for single images are canceled when settings are made for
all images.
151
Printing Using PictBridge
By connecting the camera to a printer that supports PictBridge using the
USB cable (I-USB7) provided, you can print images directly from the
camera without using a PC. Connect the camera to the printer and select
the images you want to print and the number of copies on the camera.
• You are recommended to use the AC adapter kit K-AC78
(optional) when the camera is connected to the printer. The printer
may not work properly or the image data may be lost if the battery
runs out of power while the camera is connected to the printer.
• Do not disconnect the USB cable during data transfer.
• Depending on the model of printer, not all the settings made on the
camera (such as print settings and DPOF settings) may be valid.
• A printing error may occur if the selected number of copies
exceeds 500.
• Printing the index of the images (printing multiple images on a single
sheet) cannot be performed directly from the camera. Make the
settings on a printer supporting index printing function or use a PC.
6
Editing and Printing Images
Connecting the Camera to the Printer
1
Select [PictBridge] for the [USB Connection] mode on
the [W Setting] menu.
Refer to “Changing the USB Connection Mode” (p.171).
2
3
Turn off the camera.
4
5
Turn the printer on.
Connect the camera to the printer using the USB cable
provided.
When the printer is ready to print,
turn the camera on.
The printing mode selection screen
appears.
Select printing mode
All Images
Single Image
DPOF AUTOPRINT
OK
152
OK
Printing Single Images
1
2
In the printing mode selection
screen, use the four-way
controller (23) to select [Single
Image].
Select printing mode
All Images
Single Image
DPOF AUTOPRINT
Press the 4 button.
OK
The setting screen appears.
3
Use the four-way controller (45)
to choose an image to print.
4
Use the four-way controller (23)
to choose the number of copies.
You can print up to 99 copies.
5
Use the Green button to choose
whether to insert the date or not.
OK
100 - 0017
Print this image
Copies
0 1 Date
Date
MENU Cancel
OK
Print
O (On) : The date will be imprinted.
P (Off) : The date will not be imprinted.
Press the 4 button.
A confirmation dialog appears.
To print the pictures according to the print
settings on the printer, press the 4
button.
To change the print settings, go to Step 7.
7
Press the Green button.
The screen for changing the print settings
appears.
8
Select [Paper Size] and press the
four-way controller (5).
The Paper Size screen appears.
Print with this setting?
Paper Size
Setting
Setting
Paper Type
Setting
Quality
Setting
Border Status
MENU
Change
OK
Print
PictBridge
Paper Size
Paper Type
Quality
Border Status
Setting
Setting
Setting
Setting
Editing and Printing Images
6
6
MENU
153
9
10
11
12
6
Editing and Printing Images
13
14
Use the four-way controller
(2345) to choose the paper size.
You can only choose a size that is
supported by your printer.
Press the 4 button.
Paper Size
Setting
Card
L
100×150
Postcard
4”×6”
The Paper Size setting is saved, and the
screen returns to the print settings screen.
MENU Cancel
OK
OK
Use the four-way controller (23) to select [Paper Type]
and press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select the paper
type and press the 4 button.
The Paper Type setting is saved, and the screen returns to the print
settings screen. Set [Quality] and [Border Status] in the same way as
in Steps 11 and 12.
If you select [_ Setting] for each print setting, images are printed
according to the settings made on the printer.
Paper Type with more E supports higher quality paper.
Quality with more E indicates higher print quality.
A confirmation dialog appears after each item has been set.
Press the 3 button.
The screen returns to the confirmation dialog.
Press the 4 button.
The image is printed according to the settings.
Press the 3 button to cancel printing.
If the picture already has the date imprinted on it (p.105), do not set
Date O (On) in DPOF settings. Otherwise, the date could be
imprinted twice on your printed picture.
• The self-timer lamp lights while the camera is communicating with
the printer, and blinks while the card is being accessed and during
printing. Do not disconnect the USB cable while the self-timer
lamp is blinking.
• The [Paper Size], [Paper Type], [Quality] and [Border Status]
settings are reset to the defaults when the camera is turned off.
Disconnecting the Cable from the Printer 1p.156
154
2L
8”×10”
A4
Letter
11”×17”
A3
Printing All Images
1
In the printing mode selection
screen, use the four-way
controller (23) to select [All
Images].
Select printing mode
All Images
Single Image
DPOF AUTOPRINT
OK
2
Press the 4 button.
The setting screen appears.
3
Choose the number of copies and
whether to insert the date or not.
100 - 0017
Print all images
Copies
Total
Date
The number of copies and date setting that
MENU Cancel
you choose apply to all the images.
Refer to Steps 4 and 5 in “Printing Single
Images” (p.153) for details of how to make the settings.
4
OK
0 1 Date
28
OK
Print
Press the 4 button.
5
Press the 4 button on the print settings confirmation
screen.
All the images are printed according to the settings.
Press the 3 button to cancel printing.
If the pictures already have the date imprinted on them (p.105), do
not set Date O (On) in DPOF settings. Otherwise, the date could be
imprinted twice on your printed pictures.
6
Editing and Printing Images
A confirmation dialog appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.153 and p.154) for
details of changing print settings.
155
Printing Using the DPOF Settings
1
In the printing mode selection screen, use the four-way
controller (23) to select [DPOF AUTOPRINT].
2
Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (45) to check
the number of copies for each picture,
whether to insert the date or not, and the
total number of copies. Refer to p.149 for
instructions on how to make the DPOF
settings.
3
100 - 0017
Print with DPOF setting
Copies
Total
MENU Cancel
0 1 Date
10
OK
Print
Press the 4 button.
A confirmation dialog appears.
Refer to Steps 7 to 11 of “Printing Single Images” (p.153 and p.154) for
details of changing print settings.
4
The images are printed according to the settings.
Press the 3 button to cancel printing.
6
Editing and Printing Images
156
Press the 4 button.
If the picture already has the date imprinted on it (p.105), do not set
Date O (On) in DPOF settings. Otherwise, the date could be
imprinted twice on your printed picture.
Disconnecting the Cable from the Printer
Disconnect the USB cable from the camera and printer when you have
finished printing.
1
2
Turn off the camera.
Disconnect the USB cable from the camera and printer.
Recording and Playing Back Sound
Recording Sound (Voice Recording Mode)
You can record sound with the camera. The microphone is located on
the front of the camera. When recording sound, aim the camera to obtain
the best conditions.
Microphone
Speaker
Shutter release
button
Voice Recording
7
4 button
1
MENU
Cancel
OK
Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select O
(Voice Recording).
OK
Recording and Playing Back Sound
Four-way controller
157
3
Press the 4 button.
1
The remaining recordable time and the
recording time of the current file appear on
the display.
1 Recording time
2 Remaining recordable time
01:31:44
00:00:00
SHUTTER REC Start
4
2
Press the shutter release button
fully.
02/02/2008
14:25
14 :25
01:30:22
Recording starts. The self-timer lamp blinks
00:01:22
during recording.
You can record sounds continuously for up
SHUTTER REC Stop
02/02/2008
to 24 hours.
Index
14 :25
14:25
When the Green button is pressed during
recording, an index is added to the current sound file.
5
Press the shutter release button fully.
Recording stops.
7
Recording and Playing Back Sound
158
• If you press and hold down the shutter release button for more
than one second in Step 4, recording continues until you take your
finger off the button. This is useful for making short sound
recordings.
• Sound is saved in WAVE monaural files.
Playing Back Sound
You can play back the sound files you made in O mode.
Zoom/f/y button
Q button
Four-way controller
1
2
3
1
2
100 - 0025
00:00:00
The sound file is played back.
00:01:30
1 Total file recording time
02/02/2008
2 Playback time
14:25
14 :25
The following operations can be
performed during playback.
Four-way controller (2) Pauses playback
Zoom/f/ybutton (y) Increases the volume
Zoom/f/ybutton (f) Reduces the volume
If there are no recorded indexes:
Four-way controller (4) Reverses playback
Four-way controller (5) Fast forwards playback
If there are recorded indexes:
Four-way controller (4) Plays back starting from the previous index
Four-way controller (5) Plays back starting from the next index
The following operations can be performed while playback is paused.
Four-way controller (2) Resumes playback
Four-way controller (4) Rewinds approx. 5 seconds
Four-way controller (5) Advances approx. 5 seconds
Press the four-way controller (3).
Playback stops.
7
Recording and Playing Back Sound
4
Press the Q button.
Use the four-way controller (45)
to choose a sound file to play
back.
Press the four-way controller (2).
159
Adding a Voice Memo to Images
You can add a voice memo to your still pictures.
Voice Memo
Four-way controller
4 button
MENU
Cancel
OK
OK
Recording a Voice Memo
1
Enter Q mode and use the four-way controller (45) to
choose the still picture to which you want to add a voice
memo.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
7
Recording and Playing Back Sound
160
3
Use the four-way controller (2345) to select \
(Voice Memo).
4
Press the 4 button.
Recording starts. You can record a voice
memo continuously for up to 24 hours.
5
100 - 0038
01:31:44
Press the 4 button.
Recording stops.
• A voice memo cannot be added to an image that already has a
voice memo. Delete the old voice memo and record a new one.
(p.129)
• A voice memo cannot be added to protected (Z) images
(p.134).
Zoom/w/x button
Q button
Four-way controller
Playing Back a Voice Memo
1
Enter Q mode and use the fourway controller (45) to choose the
still picture with the voice memo
that you want to play back.
U appears on images with voice memos in
single-image display.
2
100 - 0038
02/02/2008
14:25
Press the four-way controller (2).
Playback starts.
The following operations can be performed during playback.
Zoom/w/xbutton (x) Increases the volume
Zoom/w/xbutton (w) Reduces the volume
Press the four-way controller (3).
Playback stops.
Deleting a Sound File 1p.129
Recording and Playing Back Sound
3
7
161
Settings
Camera Settings
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Formatting an SD Memory Card or the Built-in
Memory
Formatting will delete all the data on the SD Memory Card.
All the data in the built-in memory will be deleted if no SD Memory Card
is inserted in the camera.
• Do not remove the SD Memory Card during formatting as this may
damage the card and render it unusable.
• Formatting will delete protected images and any data recorded on
the card with a camera other than this camera.
• SD Memory Cards formatted on a PC or device other than the
camera cannot be used. Be sure to format the card with the camera.
8
1
Settings
Use the four-way controller (23) to select [Format] on
the [W Setting] menu.
2
Press the four-way controller (5).
The Format screen appears.
3
Use the four-way controller (23)
to select [Format].
4
Press the 4 button.
When formatting is completed, the camera
returns to Capture mode or Playback mode.
Format
All data deleted
Format
Cancel
OK
162
OK
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of
sound.
1
Use the four-way controller (23) to select [Sound] on
the [W Setting] menu.
2
Press the four-way controller (5).
The Sound screen appears.
Sound
Operation Volume
Playback Volume
Start-up Sound
Shutter Sound
Operation Sound
Self-timer Sound
1
1
1
1
MENU
Changing the Operation Volume/Playback Volume
Use the four-way controller (23) to select [Operation
Volume].
4
Use the four-way controller (45) to adjust the volume.
The selected volume is saved.
Set the volume to 0 to mute the start-up sound, shutter sound,
operation sound, and self-timer sound.
5
8
Settings
3
Change [Playback Volume] in the same way as in Steps
3 to 4.
163
Changing the Sound Type
6
Use the four-way controller (23) to select [Start-up
Sound].
7
Press the four-way controller (5).
A pull-down menu appears.
8
Use the four-way controller (23) to select [1], [2], [3] or
[Off] and press the 4 button.
The selected sound type is saved.
9
Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in Steps 6 to 8.
10
Press the 3 button.
The setting is changed and the screen returns to the [W Setting] menu.
8
Settings
164
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Changing the Date and Time
You can change the initial date and time settings. You can also set the
style in which the date appears on the camera.
1
Use the four-way controller (23) to select [Date
Adjust] on the [W Setting] menu.
2
Press the four-way controller (5).
The Date Adjust screen appears.
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
3
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting,
[dd/mm/yy] or [yy/mm/dd] may be displayed.
Use the four-way controller (23)
to choose the date and time
display style.
OK
OK
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
8
0:00
MENU Cancel
OK
OK
Settings
4
0:00
MENU Cancel
Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
5
Press the four-way controller (5).
The frame moves to [24h].
6
Use the four-way controller (23)
to select [24h] (24-hour display) or
[12h] (12-hour display).
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
MENU Cancel
0:00
OK
OK
165
7
Press the four-way controller (5).
The frame returns to [Date Style].
8
Press the four-way controller (3).
The frame moves to [Date].
Date Adjust
Date Style
mm/dd / yy 24h
Date
01/01/2008
Time
MENU Cancel
9
Press the four-way controller (5).
0:00
OK
OK
Date Adjust
The frame moves to one of the following
mm/dd/ yy 24h
Date Style
items depending on the date style set in
Date
01/01/2008
Step 4.
For [mm/dd/yy] month (Example: [01])
Time
0:00
For [dd/mm/yy] day (Example: [01])
MENU Cancel
OK OK
For [yy/mm/dd] year (Example: [2008])
The following operations and screens use [mm/dd/yy] as an example.
The operations are the same even if another date style has been
selected.
10
11
Use the four-way controller (23) to change the month.
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to
change the day. After changing the day, change the year in the same
manner.
8
12
Change the time in the same way as in Steps 7 to 10.
Settings
If you selected [12h] in Step 6, the setting switches between am and
pm corresponding to the time.
13
Press the 4 button.
The date and time settings are saved.
When you finish the settings and press the 4 button, the camera
clock is reset to 00 seconds. To set the exact time, press the 4
button when the time signal (on the TV, radio, etc.) reaches 00
seconds.
166
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Setting the World Time
The date and time selected in “Setting the Date and Time” (p.38) and
“Changing the Date and Time” (p.165) serve as the W (Hometown) date
and time. By using the world time function, you can display the time in a
city other than the Hometown (XDestination). This is useful when taking
pictures in a different time zone.
Setting the Destination
1
2
3
5
6
7
The World Time screen appears.
Use the four-way controller (23)
to select X (Destination).
Select time
Destination
New York
14:25
Hometown
New York
14:25
DST
OFF
DST
OFF
8
MENU
Press the four-way controller (5).
Destination
The Destination screen appears. The city that
is currently selected blinks on the map.
Use the four-way controller (45)
to change the Destination city.
The current time, location and time
difference of the selected city appear.
City
DST
14:25
Settings
4
Use the four-way controller (23) to select [World Time]
on the [W Setting] menu.
Press the four-way controller (5).
World Time
New York
TimeDif. +0:00
OK OK
MENU Cancel
Use the four-way controller (23) to select [DST].
Use the four-way controller (45) to select O (On) or P (Off).
Select O (On) if the Destination city uses daylight saving time.
167
8
9
Press the 4 button.
The World Time setting is saved.
Press the 3 button twice.
The camera returns to capture status with the current setting.
Select W (Hometown) in Step 3 of p.167 to set the city and DST
setting for the Hometown city.
Displaying the Time of the Destination on the display
(Select Time)
1
Use the four-way controller (23) to select [World Time]
on the [W Setting] menu.
2
Press the four-way controller (5).
The World Time screen appears.
3
Use the four-way controller (23)
to select [Select time].
World Time
Select time
Destination
London
20:25
Hometown
New York
14:25
DST
DST
OFF
MENU
4
Press the four-way controller (5).
A pull-down menu appears.
5
8
Use the four-way controller (23)
to select X (Destination) or W
(Hometown).
World Time
Select time
Destination
London
20:25
Hometown
New York
14:25
MENU Cancel
DST
DST
OFF
OK
Settings
X : Displays the time in the city selected
as the Destination city
W : Displays the time in the city selected as the Hometown city
6
OK
Press the 4 button.
The Select time setting is saved.
7
Press the 3 button twice.
38
The camera returns to A mode or Q mode.
X (Destination) appears on the display
when the camera returns to A mode and
World Time is selected.
02/02/2008
20:25
168
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Changing the Display Language
You can change the language in which the menus, error messages, etc.
are displayed.
The camera supports the following 19 languages: English, French,
German, Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish,
Polish, Czech, Hungarian, Turkish, Russian, Thai, Korean, Chinese
(traditional and simplified) and Japanese.
1
Use the four-way controller (23) to select [Language/
] on the [W Setting] menu.
2
Press the four-way controller (5).
The [Language/
] screen appears.
3
Use the four-way controller
(2345) to select the language.
4
Press the 4 button.
Italiano Magyar
Nederlands
MENU Cancel
OK
OK
8
Settings
The selected language is set to be
displayed.
English Dansk
Svenska
Deutsch Suomi
Polski
169
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Changing the Image Folder Name
You can change the image folder name to Standard or Date. When the
name is changed to the date, pictures are saved in separate folders by
the date they were taken.
Folder Name
Standard
Date
xxxPENTX (where xxx is the 3-digit folder number)
xxx_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date style is set
to [dd/mm/yy]
Picture taken with
Folder name changed to Next time a picture is
standard folder name
date setting
taken
(Example: September 25) (Example: September 25) (Example: October 1)
DCIM
DCIM
DCIM
100
100PENTX
100
100PENTX
101
8
101
Settings
101_0925
101_0925
• Up to 900 folders can be created.
• Up to 999 images or sounds can be saved in a folder.
102
102_1001
1
2
3
4
170
100
100PENTX
Use the four-way controller (23) to select [Folder
Name] on the [W Setting] menu.
Press the four-way controller (5).
A pull-down menu appears.
Use the four-way controller (23) to select [Standard]
or [Date].
Press the 4 button.
The Folder Name setting is saved.
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
02/02/2008
Folder Name
Date
MENU Exit
3 button
Changing the USB Connection Mode
Choose the appropriate USB connection mode depending on whether
you are going to connect the USB cable to a PC or a PictBridgecompatible printer.
Refer to the “PC Connection Manual” for instructions on connecting
the camera to a computer.
1
Use the four-way controller (23) to select [USB
Connection] on the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select [PC] or [PictBridge].
PC
4
2/3
PC
PictBridge
MENU Cancel
5sec
3min
OK
OK
8
Settings
PictBridge
: Select this option when
transferring image data to a
computer
: Select this option when
connecting the camera to a
PictBridge-compatible printer
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
Press the 4 button.
The USB Connection setting is saved.
Do not connect the camera to your PC while [PictBridge] is selected
for the USB Connection mode. And do not connect the camera to
your printer while [PC] is selected.
171
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Changing the Video Output Format
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1
Use the four-way controller (23) to select [Video Out]
on the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select [NTSC] or [PAL].
Choose the video output format to match
the output format of the AV equipment.
4
Press the 4 button.
The Video Out setting is saved.
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Cancel
2/3
PC
NTSC
PAL
5sec
3min
OK
OK
8
Settings
Depending on the country or region, images and sound files may fail
to be played back if the video output format is set different from the
one in use there. If this happens, change the video output format
setting.
Connecting the Camera to AV Equipment 1p.126
172
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Adjusting the Brightness of the Display
You can adjust the brightness of the display.
1
Use the four-way controller (23) to select [Brightness
Level] on the [W Setting] menu.
2
Use the four-way controller (45)
to adjust the brightness.
The following setting is saved.
F (Dark)
G (Normal)
H (Bright)
3
2/3
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
PC
NTSC
5sec
3min
MENU Cancel
Exit
OK
OK
Press the 3 button.
The camera returns to Capture mode or Playback mode.
The display is displayed with the set brightness. To change the
brightness setting, perform the above steps again.
8
Settings
173
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Using the Power Saving Function
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1
Use the four-way controller (23) to select [Power
Saving] on the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
8
Settings
174
3
Use the four-way controller (23)
to select [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
4
Press the 4 button.
2/3
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Cancel
2min
1min
30sec
15sec
5sec
Off
OK
OK
The Power Saving setting is saved.
• Power Saving does not function in the following situations:
• while taking pictures in Continuous Shooting mode
• in Playback mode
• while the camera is connected to a PC or printer
• when using the AC adapter
• while recording a movie
• while the menu is being displayed
• When no operation is performed after the camera is turned on,
Power Saving is activated only after 15 seconds elapse even if
[5sec] is selected.
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is
performed for a fixed time.
1
Use the four-way controller (23) to select [Auto Power
Off] on the [W Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select [5min], [3min] or [Off].
4
Press the 4 button.
The Auto Power Off setting is saved.
2/3
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
PC
NTSC
MENU Cancel
OK
OK
8
Settings
Auto Power Off does not function in the following situations:
• while recording sound in O (Voice Recording) mode
• while taking pictures in Continuous Shooting mode
• while recording a movie
• while playing back sound
• during a slideshow or movie playback
• while the camera is connected to a PC or printer
5min
3min
Off
175
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Setting the Quick Zoom Function
You can choose whether or not to use the Quick Zoom function that
magnifies an image to a maximum of ×8 by just pressing y on the
Zoom/f/y button while playing back an image in Q mode.
1
Use the four-way controller (23) to select [Quick
Zoom] on the [W Setting] menu.
2
Use the four-way controller (45)
to select O (On) or P (Off).
O(On): The Quick Zoom is available.
P (Off): The Quick Zoom is not available.
3
8
Settings
176
Press the 3 button.
The camera returns to A mode or Q
mode. Repeat the above steps to change
the setting.
2/3
Setting
USB Connection
Video Out
Brightness Level
Power Saving
Auto Power Off
Quick Zoom
MENU Exit
Cancel
PC
NTSC
5sec
3min
OK
OK
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
Folder Name
02/02/2008
Date
MENU Exit
3 button
Setting the Guide Display
You can choose whether or not to display a guide for the mode you
choose in the Capture Mode Palette (p.53) and Playback Mode Palette
(p.59).
1
2
Use the four-way controller (23)
to select [Guide Display] on the [W
Setting] menu.
3/3
Use the four-way controller (45)
to select O (On) or P (Off).
O (ON): The mode guide is displayed.
P (OFF): The mode guide is not displayed.
3
Setting
Guide Display
Reset
MENU Exit
Press the 3 button.
The camera returns to A mode or Q mode. Repeat the above steps
to change the setting.
8
Settings
177
How to display the [W Setting] menu
1/3
Setting
MENU
Four-way controller
4 button
Format
Sound
Date Adjust
World Time
02/02/2008
Date
Folder Name
MENU Exit
3 button
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.181) for the reset settings.
1
2
Use the four-way controller (23)
to select [Reset] on the [W Setting]
menu.
Press the four-way controller (5).
Setting
3/3
Guide Display
Reset
The Reset screen appears.
MENU Exit
3
4
Use the four-way controller (23)
to select [Reset].
Press the 4 button.
Reset
Reset to
initial setting?
The settings return to the defaults.
8
Reset
Cancel
OK
Settings
178
The following settings are not affected by resetting:
• Date Adjust
• Language/
• World Time
• Video Out
OK
How to display the Playback Mode Palette
Start-up Screen
Q button
Four-way controller
4 button
MENU
Cancel
OK
OK
Changing the Start-up Screen
You can choose an image to be displayed as the start-up screen when
the camera is turned on.
1
Press the Q button.
The camera enters Q mode.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select ^
(Start-up Screen).
4
Press the 4 button.
100 - 0017
The image selection screen appears.
5
Press the 4 button.
8
MENU Cancel
OK
OK
The Start-up Screen setting is saved.
• Once the start-up screen has been set, it will not be deleted even
if the original image is deleted or the SD Memory Card or built-in
memory is formatted.
• Select [Off] to hide the start-up screen.
Settings
6
Use the four-way controller (45)
to choose an image for the startup screen.
179
Appendix
List of World Time Cities
The column “City” indicates cities that can be set as either the Initial Setting (p.36) or the
World Time (p.167).
The column “Video Output Format” indicates the video output format of the city set as the
Initial Setting.
Region
North
America
9
Appendix
180
City
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Chicago
Miami
Toronto
New York
Halifax
Central and Mexico City
South
Lima
America
Santiago
Caracas
Buenos Aires
Sao Paulo
Rio de Janeiro
Europe
Lisbon
Madrid
London
Paris
Amsterdam
Milan
Rome
Copenhagen
Berlin
Prague
Stockholm
Budapest
Warsaw
Athens
Helsinki
Moscow
Dakar
Africa/
Algiers
West Asia
Johannesburg
Video Output
Format
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
Region
Africa/
West Asia
East Asia
Oceania
City
Istanbul
Cairo
Jerusalem
Nairobi
Jeddah
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Yangon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho Chi Minh
Jakarta
Hong Kong
Beijing
Shanghai
Manila
Taipei
Seoul
Tokyo
Guam
Perth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Video Output
Format
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
NTSC
NTSC
NTSC
NTSC
PAL
PAL
PAL
PAL
PAL
PAL
NTSC
Default Settings
The table below lists the factory default settings.
The meaning of the indications for menu items with a default setting is
explained below.
Last Memory Setting
Yes : The current setting (last memory) is saved when the camera is turned off.
No : The setting returns to the default setting when the camera is turned off.
*
: The setting depends on the [Memory] setting (p.106).
— : N/A
Reset Setting
Yes : The setting returns to the default setting with the Reset
function (p.178).
No : The setting is saved even after reset.
— : N/A
[A Rec.Mode] Menu Items
E (3264×2448)
D (Better)
F (Auto)
Last Memory
Setting
Yes
Yes
*
Reset
Setting
Yes
Yes
Yes
J (Multiple)
L (Multi-segment)
Auto
Yes
*
*
Yes
Yes
Yes
p.100
p.96
p.98
±0.0
m (640×480)
C (Best)
*
Yes
Yes
Yes
Yes
Yes
p.84
p.110
p.111
Frame Rate
30fps
Yes
Yes
p.112
Color Mode
Movie SR
Full Color
O (On)
Yes
Yes
Yes
Yes
p.113
p.114
Digital wide
O (On)
Yes
Yes
p.83
Digital Zoom
Instant Review
O (On)
1 sec
*
Yes
Yes
Yes
p.80
p.101
Item
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
EV Compensation
Recorded Pixels
Quality Level
Movie
Default Setting
Page
p.91
p.93
p.94
9
Appendix
181
Face Priority
Flash Mode
P (Off)
O (On)
Last Memory
Setting
Yes
Yes
Drive Mode
P (Off)
Yes
Yes
Focus Mode
P (Off)
Yes
Yes
p.76,
p.77
p.87
Zoom Position
P (Off)
Yes
Yes
p.78
P (Off)
P (Off)
P (Off)
P (Off)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.88
p.94
p.98
p.84
Item
MF Position
Memory White Balance
Sensitivity
EV Compensation
Appendix
182
Reset
Setting
Yes
Yes
Page
p.56
p.89
AE Metering
P (Off)
Yes
Yes
p.96
Digital Zoom
O (On)
Yes
Yes
p.80
p.85,
p.121
DISPLAY
P (Off)
Yes
Yes
File No.
O (On)
Yes
Yes
—
Green Mode
G (Normal)
G (Normal)
G (Normal)
P (Off)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
p.57
p.102
p.103
p.104
p.105
Green Button
Sharpness
Saturation
Contrast
Date Imprint
9
Default Setting
[W Setting] Menu Items
Default Setting
Last Memory
Setting
Reset
Setting
Operation Volume
Cancel
3
—
Yes
—
Yes
Playback Volume
Start-up Sound
3
1
Yes
Yes
Yes
Yes
Shutter Sound
Operation Sound
Self-timer Sound
Date Style (date)
1
1
1
According to initial setting
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Item
Format
Sound
Page
p.162
p.163
24h
Yes
No
1/1/2008
According to initial setting
Same as W
hometown
According to initial
setting
P (Off)
According to initial setting
P (Off)
According to initial setting
Date
Yes
Yes
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
p.36
p.170
PC
According to initial setting
Yes
Yes
Yes
No
p.171
p.172
G
5 sec
Yes
Yes
Yes
Yes
p.173
p.174
Auto Power Off
Quick Zoom
3 min
P (Off)
Yes
Yes
Yes
Yes
p.175
p.176
Guide Display
Reset
O (On)
Cancel
Yes
—
Yes
—
p.177
p.178
Date Adjust
Date Style (time)
Date
Time
Select time
World
Time
Destination (City)
Destination (DST)
Hometown (City)
Hometown (DST)
Language/
Folder Name
USB Connection
Video Out
Brightness Level
Power Saving
p.38
p.167
9
Appendix
183
Playback Mode Palette Items
Item
Default Setting
Interval
—
3 sec
Digital SR
Slideshow
Wipe
Yes
Yes
O(On)
Depending on the
picture taken
Depending on the
picture taken
Yes
Yes
—
—
—
—
—
—
p.138
Quality Level
Cropping
Image/Sound Copy
Image Rotation
Digital Filter
Save as Still image
Divide Movies
Frame Composite
Red-eye Compensation
Voice Memo
Single Image/
Sound
All Images/Sounds
DPOF
Single Image
All Images
Image Recovery
Start-up Screen
9
Appendix
184
Page
p.122
Sound Effect
Recorded Pixels
Protect
Reset
Setting
—
Yes
Screen Effect
Resize
Movie Edit
Last Memory
Setting
—
Yes
p.123
p.136
Depending on the
picture taken
Built-in memory SD Memory Card
Normal
B&W
—
—
p.139
—
No
—
—
p.43
p.141
—
—
—
—
—
—
Default1
—
—
Depending on the
recorded image/
sound
Yes
—
—
Yes
—
—
—
—
Depending on the
recorded image/
sound
—
—
p.147
p.145
p.144
p.160
p.134
Copies: 0
—
—
Date:P (Off)
—
—
p.149
p.151
Cancel
Off
—
Yes
—
Yes
p.133
p.179
Key Operation
Q mode
Last Memory
Setting
—
Reset
Setting
—
Full wide-angle
*
No
Item
Function
Default Setting
Q button
Zoom/w/x
button
Operation Mode
Zoom Position
Page
—
p.78
2
Drive Mode
9 (Standard)
*
Yes
3
4
5
Shooting Mode
Flash Mode
Focus Mode
b (Auto Picture)
, (Auto)
= (Standard)
Yes
*
*
Yes
Yes
Yes
p.76,
p.77
p.53
p.89
p.87
3 button
Menu Display
Capture mode:
[A Rec.Mode] menu
Playback mode:
[W Setting] menu
—
—
p.48
4/W
button
Information
Display
Normal
*
Yes
p.85,
p.121
I button
Operation Mode
Face Priority On
*
Yes
p.56
Four-way
controller
9
Appendix
185
Functions Available for Each Shooting Mode
Yes : Can be set and function is available.
No : Cannot be set.
# : Can be set but function is not available.
9
Appendix
Face Priority
Smile Capture
Face Priority Off
, (Auto)
a (Flash Off)
b (Flash On)
c (Auto + Red-eye)
d (Flash On + Red-eye)
b (Soft Flash)
9 (Single-frame shooting)
g (Self-timer)
Z (2 Sec. Self-timer)
1 (Continuous Shooting)
Y (Frame Composite)
= (Standard)
q (Macro)
s (Infinity)
3 (Pan Focus)
\ (Manual Focus)
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
EV Compensation
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
Contrast
Date Imprint
*1
*2
*3
186
b
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
Yes*18
Yes
No*10
No*11
No*2, 3
Yes
No
Yes
Yes
Yes
No
No
No
Yes
9
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes*1
Yes*1
No
No
Yes
Yes
No
Yes
No
No
No
No*10
No*11
No*2, 3
No*15
No
No
No
No
No
No
No
No
R
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes*18
Yes
Yes
Yes
Yes*3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
If you select one of these functions in
another shooting mode and then enter
the Green mode, only the function
selected is available
Fixed at L (Multi-segment)
Fixed at Face Recgnition AE when the
subject’s face is recognized
A
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes*18
Yes
Yes
Yes
Yes*3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*4
*5
*6
*7
*8
*9
*10
C
O q<i zeH
Yes No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
No
No*4 No
Yes
Yes
Yes*4 No
Yes
Yes
No*4 No
Yes
Yes
Yes
Yes
No*4 No
No*4 No
Yes
Yes
No*4 No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
Yes
No
No
Yes
Yes
No
No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
Yes
Yes No
Yes
Yes
#*5
#
Yes*18
Yes*18
#*5
#
Yes
Yes
Yes #*8
No*10
No*10
Yes*12 #
Yes
Yes
No*2, 3 #
No*2, 3
No*2, 3
No*15 #
Yes
Yes
Yes*6 #
Yes
Yes
Yes
#
Yes
Yes
#
#
Yes
Yes
Yes*7 Yes*7
Yes
Yes
Yes
#
No
No
Yes
#
No
No
Yes
#
No
No
#
#
Yes
Yes
Fixed at a (flash off)
Follows setting for [Movie]
Not available during recording
Some related settings are applied
K (Manual) is not available
Fixed at Auto (Sensitivity 64 - 6400)
Fixed at F (Auto White Balance)
Note: Menu settings cannot be changed when in Digital wide mode.
4
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No*17
Yes
Yes
Yes
Yes*3
No*9
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
F
Yes
Yes
Yes
No*4
Yes*4
No*4
No*4
No*4
No*4
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No*16
Yes
Yes
Yes
Yes*3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
S
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No*13
No*19
No*19
No*19
No*19
No*19
No*19
No*19
No*19
No*19
No*19
No*19
No*19
No*19
*11 Fixed at J (Multiple)
*12 W (Automatic Tracking AF) is not
available
*13 Stitched photos are fixed at f
(however, the first frame uses h)
*14 Fixed at W (Automatic Tracking AF)
*15 Fixed at Auto (Sensitivity 64 - 800)
Face Priority
Smile Capture
Face Priority Off
, (Auto)
a (Flash Off)
b (Flash On)
c (Auto + Red-eye)
d (Flash On + Red-eye)
b (Soft Flash)
9 (Single-frame shooting)
g (Self-timer)
Z (2 Sec. Self-timer)
1 (Continuous Shooting)
Y (Frame Composite)
= (Standard)
q (Macro)
s (Infinity)
3 (Pan Focus)
\ (Manual Focus)
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
EV Compensation
Digital Zoom
Instant Review
Memory
Sharpness
Saturation
Contrast
Date Imprint
*16 Fixed at i for the first frame
*17 Fixed at f
*18 Fixed at f when the sensitivity is set
to 3200 or 6400
*19 Follows the settings before S mode is
selected
9
Appendix
\ED
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes*18
Yes
No*10
Yes
No*2, 3
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
187
Optional Accessories
A number of dedicated accessories are available for this camera.
Products marked with an asterisk (*) are the same as those supplied with
the camera.
Power supply
Rechargeable lithium-ion battery D-LI78 (*)
Battery charger kit K-BC78 (*)
(Battery charger D-BC78, AC plug cord)
AC adapter kit K-AC78
(AC adapter D-AC64, DC coupler D-DC78, AC plug cord)
The battery charger and AC plug cord are only sold as a set.
Cable
USB cable I-USB7 (*)
AV cable I-AVC7 (*)
Strap
O-ST51 (*)
O-ST24
Genuine leather strap
O-ST8
Silver chain strap
O-ST30
Waterproof strap
Camera case
O-CC78
9
Appendix
188
Messages
Messages such as the following may appear on the display during
camera operation.
Message
9
Appendix
Description
The battery is exhausted. Charge the battery using the
Battery depleted
battery charger. (p.22)
The SD Memory Card is full and no more images can be
saved.
Insert a new SD Memory Card or delete unwanted images.
Memory card full
(p.28, p.128)
Change the quality level or recorded pixels of recorded
images and try again. (p.136)
Shooting and playback are impossible due to a problem
Memory card error
with the SD Memory Card. You may be able to display or
copy the images on the card using a PC.
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
Card not formatted
not compatible with this camera. Format the SD Memory
Card in the camera. (p.162)
Card locked
The SD Memory Card is write-protected. (p.30)
This message occurs when the camera fails to compress an
Compression error
image. Change the quality level or recorded pixels of the
image and try shooting or saving it again.
No image/sound
There are no image/sound files on the SD Memory Card.
This message appears when the internal temperature of the
Movie recording stopped camera has exceeded normal operating limits while
recording a movie.
This message appears when deleting an image or sound
Deleting
file.
You are trying to play back an image or sound in a format
Camera cannot play this
not supported by this camera. You may be able to play it
image and sound
back on another brand of camera or on your computer.
The largest file number (9999) has been assigned to an
Image folder could not image in the largest folder number (999) and no more
be created
images can be saved. Insert a new SD Memory Card or
format the card. (p.162)
Protected
The image or sound file you are trying to delete is protected.
189
Message
Data being recorded
Data being processed
Built-in memory full
No image to be
processed
This image/sound
cannot be processed
No card in the camera
The built-in memory is
not enough to copy
images/sounds
Cannot process
correctly
Display image/sound
from built-in memory
Green mode must be
canceled to use this
function.
Description
This message appears when you try to switch to Q mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.
Displayed if the built-in memory is full when saving a file.
Displayed when there are no images or sound files.
Displayed for files that cannot be processed.
Displayed when no SD Memory Card is inserted.
Displayed when there is insufficient built-in memory to
perform copying.
Displayed when Red-eye Compensation processing fails.
Displayed when the camera enters built-in memory display.
Displayed when you try to use a function not supported by
the Green Mode.
Messages such as the following may appear on the display when using
the PictBridge function.
9
Appendix
190
Message
Low paper level in the
printer
No paper in the printer
Paper stuck in the printer
Low ink level in the printer
No ink in the printer
Printer error
Data error
Connection error
Check printer
Printing now
Description
The paper level of the printer is low.
There is no paper in the printer.
The paper is stuck in the printer.
The ink level of the printer is low.
There is no ink in the printer.
An error message has been sent from the printer.
A data error message has been sent from the printer.
Displayed when a PictBridge connection fails.
Displayed when printing is being executed.
Message
Printing is completed.
Continue printing?
Print Canceled
No image to be processed
Wrong DPOF setting
Description
Displayed when printing completes.
Displayed when printing is canceled.
Displayed when there are no images to print.
Displayed when DPOF printing cannot be performed.
9
Appendix
191
Troubleshooting
Problem
Cause
The battery is not
installed
9
Appendix
192
Remedy
Check if a battery is installed. If not,
install a battery.
Check orientation of the battery. Reinsert
The camera will
The battery is installed
the battery according to the +- symbols
not turn on
incorrectly
in the battery compartment. (p.23)
The battery is
Charge the battery.
exhausted
The camera is
The display is off when the camera is
connected to a computer.
No image appears connected to a PC
on the display
The camera is
The display is off when the camera is
connected to a TV
connected to a TV.
The brightness level of
Adjust the brightness level in [Brightness
the display is set too
Level] in the [W Setting] menu. (p.173)
dark
When the Power Saving function is on,
The display is
the display automatically darkens after a
hard to see
certain amount of time. Press a button to
Power Saving function
return to the normal brightness level.
is on
Select [Off] in [Power Saving] in the
[W Setting] menu to turn the Power
Saving function off. (p.174)
Pictures cannot be taken while the flash
The flash is charging is charging. Wait until charging is
finished.
The shutter will
There is no available
Insert an SD Memory Card with available
not release
space on the SD
space or delete unwanted images. (p.28,
Memory Card or in the
128)
built-in memory
Recording
Wait until recording is finished.
The subject is too far
The picture is dark
The picture becomes dark if the subject is
away in a dark
when using the
too far away. Take pictures within the
environment, such as
flash
specified flash range.
a night scene
Problem
Cause
The subject is difficult
to focus on with
autofocus
The subject is not
in focus
The subject is not in
the focusing area
Set the focus mode to q. (p.87)
Normal pictures will be out of focus if
taken with the focus mode set to q.
Set to Auto or b (Flash On). (p.89)
The flash does not discharge in these
modes.
Set the USB connection setting to [PC].
(p.171)
Set the USB connection setting to
[PictBridge]. (p.152)
Very occasionally, static electricity may cause camera malfunction. In this case,
remove the battery and install it again. If the camera is then working properly, normal
condition is restored and you can continue using the camera.
9
Appendix
The subject is too
close
The focus mode is set
to q
The flash mode is set
to a (flash off)
The drive mode is set
The flash does not to 1
discharge
The focus mode is set
to s
The shooting mode is
set to C or F
The USB
connection with a The USB connection
personal computer setting of the camera
does not function is set to [PictBridge]
properly
The USB
The USB connection
connection with a
setting of the camera
printer does not
is set to [PC]
function properly
Remedy
The camera may have difficulty in
focusing on such subjects as: low
contrast subjects (a white wall, a blue
sky, etc.), dark subjects, finely-patterned
objects, rapidly-moving objects. It is also
difficult to get proper focus when
shooting through a window or a net. Try
shooting using the focus lock (p.41), or
Manual Focus (p.88).
Locate the desired subject in the focus
frame (focusing area) in the center of the
display. If it is difficult to do so, first lock
the focus on the desired subject (focus
lock), and then move the camera to
recompose.
193
Main Specifications
Type
Fully automatic compact digital still camera with built-in zoom lens
Number of
Effective Pixels
Approx. 8.0 megapixels
Image Sensor
1/2.35 inch CCD
Number of
Recorded Pixels
Still
E (3264×2448 pixels), f (2592×1944 pixels)
g (2304×1728 pixels), h (2048×1536 pixels)
i (1600×1200 pixels), l (1024×768 pixels)
m (640×480 pixels)
* Fixed at f (2592×1944) when the sensitivity is set to 3200 or 6400.
* Fixed at f (2592×1944) in Digital SR mode.
* Fixed at f (2592×1944) in Digital Wide mode.
Movie
9
Appendix
194
m (640×480 pixels), D (320×240 pixels)
Sensitivity
(Standard Output
Sensitivity)
Auto, Fixed (ISO 64 - 6400)
* The sensitivity is fixed at Auto (64-6400) in the Digital SR (Shake
Reduction).
File Format
Still
JPEG (Exif 2.2), DCF 2.0, DPOF, PictBridge,
PRINT Image Matching III
Movie
AVI (Motion JPEG), approx. 30fps/15fps, PCM system,
monaural sound, full color/sepia/black and white, Movie
SR (Movie Shake Reduction)
Sound
Voice memo, voice recording: WAVE (PCM) system, monaural
Quality Level
Still
C “Best”, D “Better”, E “Good”
Movie
C “Best”, D “Better”, E “Good”
Storage Media
Built-in memory (approx. 51.1 MB), SD Memory Card, SDHC
Memory Card
Approximate Image Storage Capacity and Recording Time
Still
D (Better)
E (Good)
C (Best)
Built-in
Built-in
Built-in
512 MB
512 MB
512 MB
Memory
Memory
Memory
13 pictures 121 pictures 25 pictures 232 pictures 38 pictures 351 pictures
E 3264×2448
20 pictures 188 pictures 38 pictures 355 pictures 54 pictures 503 pictures
f 2592×1944
25 pictures 236 pictures 49 pictures 457 pictures 69 pictures 643 pictures
g 2304×1728
31 pictures 293 pictures 61 pictures 570 pictures 88 pictures 816 pictures
h 2048×1536
51 pictures 472 pictures 83 pictures 774 pictures 121 pictures 1119 pictures
i 1600×1200
96 pictures 888 pictures 155 pictures 1439 pictures 192 pictures 1777 pictures
l 1024× 768
m 640× 480 192 pictures 1777 pictures 297 pictures 2747 pictures 363 pictures 3358 pictures
The image storage capacity is for reference only. The actual image storage capacity
may vary depending on the SD Memory Card and the subject.
Movie/Sound
30fps
Built-in
512 MB
Memory
7 min.
C 48 sec.
31 sec.
m
1 min.
10 min.
D
640×480
5 sec.
4 sec.
1 min.
15 min.
E
39 sec.
15 sec.
1 min.
11 min.
C
17 sec.
59 sec.
D
1 min.
16 min.
D
320×240
45 sec.
14 sec.
2 min.
22 min.
E
28 sec.
53 sec.
15fps
Built-in
512 MB
Memory
1 min.
14 min.
36 sec.
48 sec.
2 min.
20 min.
10 sec.
8 sec.
3 min.
29 min.
12 sec.
37 sec.
2 min.
22 min.
28 sec.
53 sec.
3 min.
31 min.
24 sec.
28 sec.
4 min.
45 min.
57 sec.
47 sec.
Sound
Built-in
512 MB
Memory
40 min.
30 sec.
6 hr.
14 min.
15 sec.
The recording time is for reference only. The actual recording time may vary depending
on the SD Memory Card and the subject.
White Balance
Lens
Optical Zoom
Intelligent Zoom
Digital Zoom
Motion Blur
Reduction
Focus Modes
9
Appendix
Display
Playback modes
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual
Focal Length
6.3 mm - 31.5 mm
(approx. 36 mm - 180 mm in 35mm equivalent
focal length)
Aperture
F3.5 (W) - F5.6 (T)
Lens Composition 8 elements in 6 groups (4 aspherical elements)
Zoom Type
Electrically driven
5×
Approx. 6.3× at f (2592×1944), Approx. 25.5× at m (640×480)
(when combined with 5× optical zoom)
Max. 5.1× (combines with 5× optical zoom to give zoom magnification
equivalent to 25.5×)
Still
Hi-sensitivity shake reduction mode (Digital SR)
Movie
Movie shake reduction (Movie SR)
2.5 inch LCD, approx. 230,000 dots, Wide viewing angle
Single-frame, 9-frame Index, Enlargement (max. 8×, scrollable), Face
Close-up Playback, Folder Display, Calendar Display, Sound
Playback, Histogram Display, Bright/Dark Portion Display, Deleting
Selected Images, Digital SR, Slideshow, Resize, Cropping,
Image&Sound Copy, Image Rotation, Digital Filter (Color Filter (11
kinds), Digital Filter, Brightness Filter), Movie Edit, Frame Composite,
Red-eye Compensation, Voice Memo, Protect, DPOF, Image
Recovery, Start-up Image Setting
Autofocus, Macro, Infinity, Pan Focus, Manual Focus
195
Focus
Exposure control
Face Priority
Scene modes
Digital Filters
Movie
Shutter Speed
Built-in Flash
Drive Modes
9
Appendix
196
Self-timer
Time Function
Power Source
Type
TTL contrast detection system by sensor
9-point autofocus (multiple/spot/automatic tracking
AF changeable)
Focus range
(From lens face)
: 0.4 m - ∞ (Wide-angle)
0.9 m - ∞ (Telephoto)
Macro
: 0.1 m - 0.5 m (Wide-angle)
0.6 m - 1.0 m (Telephoto)
* It is possible to switch to Pan Focus, Infinity and
Manual Focus.
* Face Recognition AF is available only while the
camera recognizes the subject’s face.
By half-pressing shutter release button
Multi-segment metering, Center-weighted
metering, Spot metering
±2 EV (can be set in 1/3 EV steps)
Focus Lock
Metering System
Normal
Exposure
Compensation
Recognition of max. 15 people’s faces, Smile Capture
Auto Picture, Green, Program, Night Scene, Movie, Voice Recording,
Landscape, Flower, Natural Skin Tone, Portrait, Digital SR (Blur
Reduction), Surf & Snow, Sport, Pet, Kids, Food, Digital Panorama,
Digital Wide
* Face Recognition AE is available only while the camera recognizes
the subject's face.
B&W, Sepia, Red, Pink, Purple, Blue, Green, Yellow, Soft, Color
extraction (Red, Green, Blue), Brightness
Approx. 1 second - until built-in memory or SD
Continuous
Memory Card is full (however, maximum size is
Recording Time
limited to 2 GB)
1/2000 sec. - 1/4 sec., max. 4 sec. (Night Scene mode)
Auto, Flash Off, Flash On, Auto + Red-eye, Flash
Modes
On + Red-eye, Soft Flash
Wide-angle:approx. 0.2 m - 4.4 m (approx. 0.66 ft Flash Range
14.44 ft)
(Sensitivity: in Auto condition)
Telephoto: approx. 0.6 m - 2.8 m (approx. 1.97 ft 9.19 ft)
(Sensitivity: in Auto condition)
Single-frame, Self-timer (approx. 10 sec., approx. 2 sec.),
Continuous, Frame Composite
Electronic control type, control time: Approx. 10 sec., 2 sec.
World Time
75 cities (28 time zones)
Rechargeable lithium-ion battery D-LI78, AC adapter kit (optional)
Battery Life
Interfaces
Video Output
PictBridge
Dimensions
Weight
Accessories
Number of
Recordable
Images
approx. 210
pictures
* Recording capacity shows approximate number
of shots recorded during CIPA-compliant testing
(with display on, flash used for 50% of the shots,
and 23 degrees centigrade). Actual
performance may vary according to operating
conditions.
* According to the result of in-house testing.
Actual time may differ depending on usage
conditions.
Playback Time
approx. 240 min.
Movie Recording
Time
approx. 70 min.
Sound Recording
Time
approx. 300 min.
USB 2.0 (high-speed compatible) /PC/AV terminal
NTSC/PAL (monaural)
Printer
PictBridge-compatible printer
Print Modes
Print One, Print All, DPOF AUTOPRINT
Paper Size
Card, L, 2L, Postcard, 100 mm×150 mm, 4"×6",
8"×10", Letter, 11"×17", A4, A3, printer setting
Paper Type
C, D, E, printer setting
Quality
C, D, E, printer setting
Border Status
With/without, printer setting
Approx. 95 (W) × 55 (H) × 23.5 (D) mm (excluding operating or
protruding parts)
Approx. 115 g (excluding battery and SD Memory Card)
Approx. 130 g (including battery and SD Memory Card)
Rechargeable lithium-ion battery, battery charger, AC plug cord, USB
cable, AV cable, software (CD-ROM), strap, Operating Manual, PC
Connection Manual, Quick Guide
9
Appendix
197
WARRANTY POLICY
All PENTAX cameras purchased through authorized bona fide photographic
distribution channels are guaranteed against defects of material or workmanship
for a period of twelve months from date of purchase. Service will be rendered, and
defective parts will be replaced without cost to you within that period, provided the
equipment does not show evidence of impact, sand or liquid damage,
mishandling, tampering, battery or chemical corrosion, operation contrary to
operating instructions, or modification by an unauthorized repair shop. The
manufacturer or its authorized representatives shall not be liable for any repair or
alterations except those made with its written consent and shall not be liable for
damages from delay or loss of use or from other indirect or consequential
damages of any kind, whether caused by defective material or workmanship or
otherwise; and it is expressly agreed that the liability of the manufacturer or its
representatives under all guarantees or warranties, whether expressed or
implied, is strictly limited to the replacement of parts as hereinbefore provided. No
refunds will be made on repairs by non-authorized PENTAX service facilities.
9
Appendix
198
Procedure During 12-month Warranty Period
Any PENTAX which proves defective during the 12-month warranty period should
be returned to the dealer from whom you purchased the equipment or to the
manufacturer. If there is no representative of the manufacturer in your country,
send the equipment to the manufacturer, with postage prepaid. In this case, it will
take a considerable length of time before the equipment can be returned to you
owing to the complicated customs procedures required. If the equipment is
covered by warranty, repairs will be made and parts replaced free of charge, and
the equipment will be returned to you upon completion of servicing. If the
equipment is not covered by warranty, regular charges of the manufacturer or of
its representatives will apply. Shipping charges are to be borne by the owner. If
your PENTAX was purchased outside of the country where you wish to have it
serviced during the warranty period, regular handling and servicing fees may be
charged by the manufacturer’s representatives in that country. Notwithstanding
this, your PENTAX returned to the manufacturer will be serviced free of charge
according to this procedure and warranty policy. In any case, however, shipping
charges and customs clearance fees to be borne by the sender. To prove the date
of your purchase when required, please keep the receipt or bills covering the
purchase of your equipment for at least a year. Before sending your equipment
for servicing, please make sure that you are sending it to the manufacturer’s
authorized representatives or their approved repair shops, unless you are
sending it directly to the manufacturer. Always obtain a quotation for the service
charge, and only after you accept the quoted service charge, instruct the service
station to proceed with the servicing.
• This warranty policy does not affect the customer’s statutory rights.
• The local warranty policies available from PENTAX distributors in some
countries can supersede this warranty policy. Therefore, we recommend
that you review the warranty card supplied with your product at the time
of purchase, or contact the PENTAX distributor in your country for more
information and to receive a copy of the warranty policy.
9
Appendix
The CE Mark is a Directive conformity mark of the European
Union.
199
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus complies with Canadian ICES-003.
9
Appendix
200
Pour les utilisateurs au Canada
Cet appareil numérique de la classe B est conforme à la norme NMB003 du Canada.
FOR CALIFORNIA, U.S.A. ONLY
Perchlorate Material-special handling may apply. The lithium battery
used in this camera contains perchlorate material,which may require
special handling. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
Located at: 600 12 th Street, Suite 300
Golden, Colorado 80401 U.S.A.
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein
complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital
device. Each product marketed is identical to the representative unit
tested and found to be compliant with the standards. Records
maintained continue to reflect the equipment being produced can be
expected to be within the variation accepted, due to quantity production
and testing on the statistical basis as required by 47CFR §2.909.
Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired
operation. The above named party is responsible for ensuring that the
equipment complies with the standards of 47CFR §15.101 to §15.109.
Product Name: PENTAX Digital Still Camera
Model Number: Optio M50
Contact person: Customer Service Manager
Appendix
Date and Place: January, 2008, Colorado
9
201
Information on disposal for users
1. In the European Union
If your product is marked with this symbol, it means that
used electrical/electronic products should not be mixed with
general household waste. There exists a separate collection
system for these products.
Used electric/electronic equipment must be treated
separately and in accordance with legislation that requires
proper treatment, recovery and recycling of these products.
Following the implementation by member states, private
households within the EU states may return their used
electrical/electronic equipments to designated collection
facilities free of charge*. In some countries your local retailer
may also take back your old product free of charge if you
purchase a similar new one.
*Please contact your local authority for further details.
By disposing of this product correctly you will help ensure
that the waste undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on
the environment and human health which could otherwise
arise due to inappropriate waste handling.
2. In other countries outside the EU
9
Appendix
202
If you wish to discard this product, please contact your local
authorities and ask for the correct method of disposal.
For Switzerland: Used electrical/electronic equipment can
be returned free of charge to the dealer, even when you
don’t purchase a new product. Further collection facilities
are listed on the home page of www.swico.ch or
www.sens.ch.
Memo
Index
9
Appendix
204
Symbols
S Digital Wide ..................81
[A Rec.Mode] menu ......... 51
A mode .................... 10, 115
I button ..................... 44, 46
Q button .................... 44, 47
Q mode ................... 10, 115
[W Setting] menu ............... 52
9 Green Mode ................. 63
X Green Button .... 45, 47, 57
i Delete ................... 43, 128
x Tele ............................... 78
w Wide ............................ 78
y Magnify ....................... 118
f Nine-image display ..... 116
g Self-timer ...................... 76
1 Continuous Shooting .... 77
b Auto Picture ........... 54, 61
R Program ................. 54, 62
A Night Scene ........... 54, 65
C Movie ............................ 54
O Voice Recording ... 54, 157
Y Frame Composite ........ 66
q Landscape ................... 54
< Flower .......................... 54
e Portrait .......................... 54
i Surf & Snow ................ 54
\ Sport ............................. 54
EFHG Pet ............... 54, 70
4 Digital SR
(Blur Reduction) .......... 54, 65
P Digital SR
(Camera Shake
Reduction) ....................... 122
H Kids .............................. 54
D Food .............................. 55
z Natural Skin Tone ......... 54
F Digital Panorama ........ 74
A
AC adapter .........................26
Adding sound
(Voice Memo) ..................160
AE metering .......................96
Auto + Red-eye c .............89
Auto F .........................94
Auto Power Off ................175
Auto, ................................89
Autofocus conditions ........100
AV equipment ..................126
B
B&W .................................113
Basic mode ........................63
Battery level indicator ........25
Bright portions ....................19
Brightness Filter ...............143
Built-in memory display ....115
C
Calendar display ..............117
Calling up menus ...............57
Camera shake .............79, 85
Capture Mode Palette ........53
Center-weighted
metering M .......................96
Changing volume .....159, 163
Charging a battery .............22
Checking the Memory
Card ...................................34
Color Mode ......................113
Computer .........................171
Connecting to a printer ....152
Continuous Shooting 1 ....77
Contrast ...........................104
Copy ................................ 139
Cropping .......................... 138
Frame Composite ......66, 145
Frame Rate ................32, 112
D
G
Dark portions ..................... 19
Date and time ............ 38, 165
Date Imprint ..................... 105
Daylight G ......................... 94
Daylight saving time .......... 38
Default setting ........... 36, 181
Delete i ................... 43, 128
Deleting sounds ............... 129
Digital Filter ..................... 141
Digital Panorama F ........ 74
Digital SR
(Blur Reduction) .......... 54, 65
Digital SR
(Camera Shake
Reduction) ....................... 122
Digital Wide ....................... 81
Digital Zoom ...................... 80
Display brightness ........... 173
Dividing movies ............... 148
DPOF printing .................. 156
DPOF settings ................. 149
Green Button X ....45, 47, 57
Green Mode 9 .................63
Guide display ...................177
F
Histogram ..........................86
Hometown ..........................38
I
Infinity s ............................87
Installing a battery ..............23
Instant Review ...........41, 101
L
Language ...................36, 169
M
Macro q .............................87
Magnify y .......................118
Manual Focus \ .............87
Manual K ..........................94
Memory ............................106
3 button ..............45, 47
Movie SR (Movie Shake
Reduction) Function .........114
Multi-segment
metering L .......................96
N
Nine-image display f .....116
NTSC ...............................172
Number of pixels ................91
Number of Recordable
Images ...............................32
9
Appendix
Face close-up playback ... 119
Face Recognition AE ......... 56
Face Recognition AF ......... 56
File # ................................ 106
Flash Off a ....................... 89
Flash On + Red-eye d ...... 89
Flash On b ....................... 89
Fluores. Light J ................ 94
Focus Mode ....................... 87
Focusing ............................ 87
Focusing Area ................. 100
Folder display .................. 117
Format ............................. 162
Four-way controller ...... 45, 47
H
O
4/W button ...45, 47
Optional accessory ..........188
205
P
Quality Level ................ 31, 93
Quick Zoom ..................... 176
Saving as still picture
(movie) .............................147
Saving settings ................106
SD Memory Card ...............28
Select time .......................168
Self-timer g .......................76
Sensitivity ...........................98
Sepia ................................113
Setting the exposure ..........84
Shade H ...........................94
Sharpness ........................102
Shooting information
...................................85, 121
Shooting Mode ...................53
Shutter release
button .....................41, 44, 46
Slideshow ........................123
Soft Flash b ......................89
Sound settings .................163
Sound types .....................164
Spot AE metering N .........96
Standard = .....................87
Start-up screen ................179
Strap ..................................21
R
T
PAL ................................. 172
Pan Focus 3 ................... 87
Panoramic Pictures ........... 74
Photo processing lab ....... 149
PictBridge ........................ 152
Playback
.......... 42, 115, 125, 159, 161
Playback Mode .................. 35
Playback Mode Palette ...... 59
Playing back movies ........ 125
Playing back sounds ....... 159
Power Saving .................. 174
Power switch ......... 34, 44, 46
Press fully
(shutter release button) ..... 41
Press halfway
(shutter release button) ..... 41
Printing ............................ 152
Protect Z ...................... 134
Q
9
Appendix
Recorded Pixels
...................... 31, 32, 91, 110
Recording movies ............ 108
Recording sounds ........... 157
Recovering images .......... 133
Red-eye Compensation ... 144
Red-eye reduction
cd ............................. 89, 90
Resetting settings ............ 178
Resize ............................. 136
Rotating ............................. 43
S
Saturation ........................ 103
206
Tungsten Light I ..............94
TV ....................................126
U
USB connection mode .....171
V
Video output format .........172
Voice Memo .....................160
W
White Balance ....................94
World Time ......................167
Z
Zoom button ................ 44, 46
Zoom xw ....................... 78
9
Appendix
207
Memo
Memo
HOYA CORPORATION
PENTAX Imaging System Division
2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN
(http://www.pentax.jp)
PENTAX Europe GmbH
(European Headquarters)
Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited
PENTAX House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.uk)
PENTAX France S.A.S.
112 Quai de Bezons, B.P. 204, 95106 Argenteuil
Cedex, France
(http://www.pentax.fr)
PENTAX Italia S.r.l.
Via Dione Cassio 15, 20138 Milano, ITALY
(http://www.pentaxitalia.it)
PENTAX (Schweiz) AG
Widenholzstrasse 1, 8304 Wallisellen, Postfach 367,
8305 Dietlikon, SWITZERLAND
(http://www.pentax.ch)
PENTAX Europe GmbH
(Tyskland) Filial Sverige
Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
Digital Camera
Operating Manual
PENTAX Imaging Company
A Division of PENTAX of America, Inc.
(Headquarters)
600 12th Street, Suite 300 Golden, Colorado 80401, U.S.A.
(PENTAX Service Department)
12000 Zuni Street, Suite 100B Westminster, Colorado
80234, U.S.A. (http://www.pentaximaging.com)
PENTAX Canada Inc.
1770 Argentia Road Mississauga, Ontario L5N 3S7,
CANADA (http://www.pentax.ca)
PENTAX Trading
(SHANGHAI) Limited
23D, Jun Yao International Plaza, 789 Zhaojiabang
Road, Xu Hui District, Shanghai, 200032 CHINA
(http://www.pentax.com.cn)
http://www.pentax.jp/english
• Printed on recycled paper.
• Specifications and external dimensions are subject to change without notice.
53357
Copyright © HOYA CORPORATION 2008
H03-200803 Printed in Vietnam
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
">