Mcintosh MEN220 Room Correction System Owner manual

1A
MEN220 Connection Diagram
Preamplifier
Controller (Preamplifier)
Note: Refer to the MEN220 Owner’s
Manual page 9 for additional
connection information.
Connection Legend:
Data Cable*Sensor/Keypad Cable Power Control Cable* Audio Signal Cable Video Signal Cable RF Signal Cable Digital Signal Cable RS232 Cable Ground Wire AC Power Cords Loudspeaker Cable -
IR Sensor
* 2 conductor shielded with 1/8 inch
stereo mini phone plug on each end.
Loudspeaker (Partial View, Right Channel)
-
+
Loudspeaker (Partial View, Left Channel)
Connect to
AC Outlet
Power Amplifier 1 (Partial View, Right Channel)
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549
Power Amplifier 2 (Partial View, Left Channel)
Part No. 04116400
-
+
1B
MEN220 Connection in a Processor Loop
Preamplifier
Controller (Preamplifier)
Note: Refer to the MEN220 Owner’s
Manual page 10 for additional
connection information.
Connection Legend:
Data Cable*Sensor/Keypad Cable Power Control Cable* Audio Signal Cable Video Signal Cable RF Signal Cable Digital Signal Cable RS232 Cable Ground Wire AC Power Cords Loudspeaker Cable -
IR Sensor
* 2 conductor shielded with 1/8 inch
stereo mini phone plug on each end.
Loudspeaker (Partial View, Right Channel)
-
+
Loudspeaker (Partial View, Left Channel)
Connect to
AC Outlet
Power Amplifier 1 (Partial View, Right Channel)
Power Amplifier 2 (Partial View, Left Channel)
-
+