Foscam FI9853EP Quick Installation Guide

Setting Up Your Foscam
Security Camera
B
A Getting Started
Quick Setup Guide
Setting Up Your Camera:
Wired Connection via Foscam App
Power
LAN
Package Contents
Outdoor HD Security Camera
C
Physical Description
4. Under “Foscam” select “Tap to add a camera” and then select "Camera",
Reset Button
LENS
Array LED
3. From your smartphone, search for “Foscam”
via the App Store or
Google Play Store. Download, install and open the App to begin
configuration.
after that scan the QR code, which is located at the bottom of your
camera (see illustrations below).
Router / Switch
WPS
Foscam
<
Scan QR Code
Tap to add a camera
Power Adapter
Expansion Screws
Note: A power adapter is unnecessary if the router / switch supports PoE
(Power over Ethernet) functionality, otherwise, please connect the power
adapter to the camera.
Tap + button
Quick Setup Guide
Scan the QR code which is
located on your camera.
Outdoor HDSecurity Camera
Minimum Requirements:
Model: FI9853EP
IP Camera
To help ensure a smoother video experience on the smartphone, it’s
recommended that your smartphone has the following:
Quick Setup Guide
iOS: version 8.1 or higher.
Security Tips
To view this guide in other languages (e.g. Nederlands, Deutsch,
Français, Español), and for detailed manuals, tools, etc., please visit
foscam.com/downloads.
V5.0.7
Warning:
< Choose Setup Method
Wired
1. Connect the camera to your Internet router using an Ethernet cable.
Add Cameras
Wi-Fi
Camera Setup Steps:
Please change the password of your camera regularly, using a
combination of numbers, letters and special characters.
We recommend that you regularly update your camera to the
latest available software and firmware versions to help ensure
the best experience for your camera.
Android: 4.1 or higher, using a device with a Graphics Processing Unit
(GPU) function.
5. On the “Choose Setup Method” screen, confirm that “Wired” is selected
(upper-left corner) and tap “Ready for Wired Connection.” Wait a few
moments for a message confirming that the setup process has been
completed (see illustrations below).
Camera added
successfully!
Ready for Wired Connection
2. Connect the power adapter to the camera.
The cords on this product presents a potential strangulation hazard. For child
safety, please keep these cords out of the reach of children.
Confirm “Wired” and then tap
“Ready for Wired Connection”
Camera added successfully!
D
Other Ways to Access Your Camera
E
F
Hardware Installation
1. Loosen the three screws on the base of the camera and remove the
camera base.
Foscam Cloud Service
Foscam Cloud
You can access the camera via the Foscam Cloud website:
Some of the benefits of viewing your camera in the cloud:
Enjoy the latest features first through Foscam Cloud including cloud
storage, video sharing, and more.
Getting started is fast—if you have already registered an account
through Foscam App, you can directly use your login credentials for
Foscam Cloud.
Camera Username & Password
Firmware Upgrade
The camera username & password are used to access and manage
your camera. Having a strong password can improve the security of
You can upgrade the firmware of your camera with Foscam App by
using the new "One-key Online Upgrade" feature (Open Foscam APP,
select Settings > Firmware Upgrade).
your camera significantly.
https://www.myfoscam.com
It’s simple and convenient to remotely access and manage all your
WiFi security cameras.
Important Notice
2. According to the monitored area, install the base of the camera on the
ceiling or wall using the included screws.
3. Assemble the sphere, cover, and decorative ring, and set the angle of
the camera to your desired viewing area.
Finally, fix the decorative ring and the base with screws.
Web User Interface
Ceiling or wall
(e.g.Internet Explorer/Edge/Chrome/Firefox/Safari)
Base
If you have forgotten either of them, Please press the "Reset" button
and hold it for more than 15 seconds while the camera is powered
on. Then release the button and wait for a few moments until the
camera automatically reboot. The default settings will be restored.
The default username / password will then become admin / (blank),
respectively.
After restoring to the factory default settings, please delete the
camera from Foscam App, and then add it again.
You also can download the latest version to upgrade your camera
from our official website foscam.com/upgrades.
Safety Tips
Please ensure that the proper power supply is used before using
the camera.
Foscam Cloud Service Account Username & Password
Please install the camera securely using the screws provided.
Your Foscam Cloud service account and password may be used to
access both Foscam App and the Foscam Cloud service website.
Therefore, you may register the account username & password on
either one.
in a cool, dry place.
To avoid the risk of fire or electric shock, please keep your camera
CE Certificate Website:
http://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public:
http://www.foscam.com/company/open-information.html
www.foscam.com
Please keep the camera out of reach of small children.
Change your default port to a greater range to help ensure the
safety of your connection.
If you would like to manage your camera more professionally, we
suggest you access your camera via browser. You can download the
“Equipment Search Tool” from foscam.com/tools to your computer,
then access the camera directly.
Storage Media
Sphere
Cover
Your camera supports cloud and NVR (Network Video Recorder)
storage formats.
Decorative ring
If you wish to record and playback large amounts of video, we
recommend using a Foscam NVR device as well.
Check the logs of your Foscam cameras frequently. Foscam cameras
have embedded logs reminding you which IP addresses are accessing
the camera.
Questions? For any issues that occur during the setup process,
please write to [email protected] —we’re here to help!
As a result of product upgrades and other reasons, this guide may not be able to
update in time, resulting in inconsistency with the official website information,
please take the official website (www.foscam.com) information as the standard.