ICP DAS USA DL-303-WF Quick Start Guide

DL-300 Series Quick Start
For DL-301/DL-302/DL-303
What’s in the shipping box?
DL-300 Logger
Software Utility CD
Jan. 2018
Version 1.2.2
Quick Start
Technical Support
 User Manual and Utilities
CD:\Napdos\IIoT\DL-300\
 Product Website
http://www.icpdas.com/root/product/solutions/remote_io/rs-4
85/dl_series/dl-300.html
 E-mail
[email protected]
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
1
1
-----------------------------------------------------------------------------------
Connecting the Power Supply
The DL-300 logger can be powered by either a PoE switch or a
+12 ~ +48 V power supply as below:
+12 ~ +48 VDC
Power Supply
Wire requirement:
 Stripping length: 8 ~ 10 mm
 0.20 - 1.5 mm² (IEC) / 28 - 16 AWG (UL)
 Push In (Solid Wire or Wire with wire-end ferrule)
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
2
 Flexible Wire
1
2
3
2
3
 Push and Release
1
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
3
2
-----------------------------------------------------------------------------------
Powering-on the DL-300 logger
NOTE:
To increase the lifetime of the LCD screen, the default screen saver time
is changed to 30 seconds, i.e. the LCD screen will be turned off when it is
not touched for more than 30 seconds, for the shipment after Jan 5 2018.
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved.
4