Posiflex | MT-4308W/4310W | User manual | Posiflex MT-4308W/4310W User Manual

Posiflex MT-4308W/4310W User Manual
MT-4308W/4310W
Mobile Terminal System
User Manual
MT-4308W/R
MT-4310W/R
Package Contents







MT-4308W/H
MT-4310W/H
MT-4308W/R or MT-4310W/R (x 1)
Pistol grip (x1)
15W power adaptor (x 1)
Stylus (x 1)
RB-3000 Battery pack for pistol grip (x 1)
User manual (x 1)
Barcode scanner user manual (x 1)
Package Contents




MT-4308W/H or MT-4310W/H (x 1)
15W power adaptor (x 1)
Stylus (x 1)
User manual (x 1)
MT-4308W/4310W is required to be charged over 8
hours when used for the first time.
12550900040 Ver. C0
http://www.posiflex.com
1
Product Feature
Ergonomic Design
Pistol grip shape handle is ergonomically designed for easy handling of the
tablet.
Extra Protection
Hand strap strengthens the stability and eases user’s fatigue during the hours of
work.
All-in-one Solution
Optional dock station equips with a built-in 3” thermal printer and various I/O
connectivity; once the tablet is integrated with the dock station, an all-in-one
POS is instantly at your disposal.
Versatile Function
MSR attachment and 1D or 2D barcode scanner built in the pistol grip; MT4308W/4310W offers more than just mobility but versatility.
Long Hour Operation
MT-4308W/4310W is designed with advanced power saving technology that
provides long battery life for daily operation. The pistol grip also houses a
removable battery that can vastly extend the overall operating time.
Views of MT-4308W/H
Front View
LED Indicator
Projected Capacitive
Touch Screen
3-track Magnetic Stripe
Reader (Optional)
Rear View
3-track Magnetic Stripe
Reader (Optional)
Speaker
Rear Camera
Hand strap
2
Top View
microUSB Port
Left Side View
Docking Station Connector
5VDC-IN Power Jack
Docking Station Locking Hole
Right Side View
Mic-in/Line-Out
Combo Jack
Micro SD Card Slot
Power Button
Nano SIM Card Slot
Slot
3
Views of MT-4310W/H
Front View
Projected Capacitive
Touch Screen
3-track Magnetic Stripe
Reader (Optional)
LED Indicator
Rear View
3-track Magnetic Stripe
Reader (Optional)
Hand strap
Speaker
Rear Camera
Left Side View
Docking Station Connector
5VDC-IN Power Jack
microUSB Port
Docking Station Locking Hole
4
Mic-in/Line-Out
Combo Jack
Right Side View
Smart Card Reader
(Optional)
Power Button
Nano SIM Card Slot
(Only available for MT-4308W/4310W series
with 3G Module)
Micro SD Card Slot
Load RB-3000 Battery Pack and a stylus into
Pistol Grip PG-200E (for MT-4308W/R & MT-4310W/R)
Both MT-4308W/R and MT-4310W/R with PG-200E pistol grip support 1D
CCD, 1D Laser, and 2D barcode scanner. Before the scanner can be initiated,
it is required to install the battery pack RB-3000 and a stylus in the battery
compartment inside the pistol grip. Please follow the steps listed below to
finish the installation.
1. Press down the lever and then push up the cover for battery
compartment as shown in the figure.
2. To replace the existing battery, gently push
the metal clip outwards to release the
battery. If you are installing the battery for
the first time, please skip to the next step.
Metal clip
5
3. After having the rail on the battery pack
aligned with battery clip, push down the
battery pack into battery compartment.
4. Push down the cover to close the battery
compartment.
Connecting the Pistol Grip onto MT-4308W/R & MT4310W/R
MT-4308W/R and MT-4310W/R models are equipped with an additional
pistol grip which aims to help users grip the terminal more easily while they
are operating the scanner. Please refer to the following instructions to install
the pistol grip onto the tablet.
1. To attach the pistol grip to the tablet, align the arrow head on the top
side of the pistol grip with the tail of the arrow on the rear of the
tablet.
2. After ensuring the pistol grip is well
attached to the tablet, push the pistol
grip in the direction indicated by the
arrow as shown in the figure.
6
3. Make sure the head of the down arrow on the pistol grip is supposed to
be aligned with the head of the arrow on the rear side of the tablet as
the below figure shows, which indicates the pistol grip is well
mounted.
4. To check how much battery capacity
remains in PG-200 pistol grip, press the
battery capacity checking button on the
pistol grip to show the current battery
capacity level through the LED
indicator.
Replacing the Pistol Grip with a Hand Strap Cover (Optional)
The hand strap cover is an optional peripheral designed for users to easily hold
the tablet for operation. To replace the pistol grip with a hand strap cover,
follow the steps listed below.
1. While pushing the release lever to the left
(1), slide the pistol grip in the direction
indicated by the arrow in the figure (2).
2
1
2. Pull the pistol grip off from the tablet.
7
3. Align the hand strap cover with the grooves
on the rear side of the table.
4. Make sure that the hand strap cover is well
attached to the rear side of the tablet.
5. Slide the hand strap cover up in the
direction indicated by the arrow until it is
clicked into place.
6. Fasten the hand strap cover onto the tablet
using a screw.
Replacing the Hand Strap Cover with a Pistol Grip (Optional)
Please follow the below steps to replace the hand strap cover with a pistol grip.
1. Loosen the screw to remove the hand strap
cover from the tablet.
8
2. Slide the hand strap cover down in the
direction indicated by the arrow.
3. Remove the hand strap cover from the rear
side of the tablet.
4. Go through the Connecting the Pistol Grip onto MT-4308W/R &
MT-4310W/R section which is described previously to complete the
installation of the pistol grip onto the tablet.
Installing micro SD Card or SIM card in MT-4308W/4310W
Please follow the below steps complete the installation of micro SD card and
SIM card.
1.
Turn off MT-4308W/4310W completely. Then, pull off the rubber
cover located on the right side of your tablets to find micro SD
card slot and nano SIM card slot.
2.
Have the rear of the tablet face towards you to install micro SD
card or SIM card.
2.1. To insert a micro SD card into the
micro SD card slot, make sure the
side with the golden finger of the
card faces downwards, and then slide
the card down into the slot.
2.2. Similarly, to install a SIM card, push
SIM card into nano SIM card slot
with its gold contacts facing towards
you.
3.
4.
Pull off the rubber cover to close the compartment.
If you attempt to release a micro SD card or SIM card from the
slot, push the card with your fingertip to slide it out.
9
Charging the Battery
Below are some cautionary advices you need to keep in mind while you
attempt to charge the battery.
1. MT-4308W/4310W is required to be charged over 8 hours when used
for the first time.
2. When the low battery warning message appears as shown below,
please fully charge the battery to avoid data loss.
3. When the low battery capacity indicator on the pistol grip beams or
low battery warning message appears, please charge or replace the
battery for the pistol grip immediately.
4. Only charge the battery with power adapter which comes with
MT-4308W/4310W. Using a different power adapter may damage
your device.
5. When the battery is running very low (less than 6 percent of battery
capacity), the system will be automatically shut down to protect the
battery from being over-discharged.
Please go through the following instructions to charge MT-4308W/4310W
using the power adapter.
For MT-4308W/R & MT-4310W/R
In considering the battery life could be consumed drastically under heavy
usage, you may also choose to purchase either another replacement battery
RB-3000 for the pistol grip or the battery charger CS-100 for rapidly charging
the replacement battery RB-3000.
1.
Connect the power connector of the
power adaptor to the tablet.
2.
Plug the AC power adaptor cord into an electrical outlet. In general,
the tablet battery will be charged first. Once the process of charging
the tablet is complete, the pistol grip battery will then be charged.
10
For MT-4308W/H & MT-4310W/H
1.
Find the power jack on the left side of your tablet, and then connect
the power connector of the power adaptor to it.
2.
Plug the AC power adaptor cord into an electrical outlet to initiate the
charging process.
Status LED Indicator
LED indicator is specially designed to deliver special message regarding the
current system status and battery life. The blow chart enumerates all the
possible LED indicators and its meaning for your reference.
LED Status
Solid blue
Solid Orange
Blinking Orange
OFF
System Status
ON
ON
ON
ON
OFF
OFF
Descriptions
■ System booting.
■ System is being charged.
■ Battery charging error occurs
■ System enters sleep mode.
■ System has been booted to Windows.
■ Battery is fully charged.
■ System powers off
Powering ON/OFF MT-4308W/4310W
Power ON MT-4308W/4310W
To power on MT-4308W/4310W, keep pressing the power button of the
machine for 5-10 seconds. If the terminal falls into the sleep mode after
remaining idle for a specific period of time, push the power button to wake
the device up.
Power OFF MT-4308W/4310W
When MT-4308W/4310W stays in idle mode, push the power button to
put your device into sleep mode, and press the power button again to wake
up the tablet. To completely shut down the machine, you need to press and
hold the power button for at least 20 seconds. In the case the system halts
for unknown reasons, you are advised to hold down the button until a
system shutdown is initiated.
11
Operating TA-220/300 Magnetic Stripe Reader (Optional)
MT-4308W and MT-4310W models also offer MSR solutions. As optional
items, TA-220/300 both allow you to integrate built-in MSR into MT-series
tablet. However, TA-220 mainly supports MSR with RFID but TA-300 is an
attachment combined with three-track MSR and finger printer sensor.
Please go through the following instructions on how to operate magnetic stripe
reader provided via TA-220/300.
1. Have the side with the magnetic stripe of a card
face the touch panel of the tablet.
2. Swipe the magnetic stripe card along the track
of the reader from top to bottom or from
bottom to top.
Operating the 1D/2D Scanner (for MT-4308W/R & MT4310W/R)
MT-4308W/R and MT-4310W/R models are
equipped with an optional 1D CCD, 1D Laser, or
2D scanners features 1D and/or 2D barcode
scanning. It also supports two types of USB
interfaces, USB HID or USB Virtual COM, and
the scanner is generally set to USB HID mode by
default. For more detailed information, please
refer to the barcode scanner user manual.
Mounting TA-500 onto MT-series Tablet (Optional)
TA-500 is an external battery pack kit mainly
designed to provide extra battery life to MTseries tablet. For the detailed installation
instructions, please refer to TA-500 user
manual.
12
Installing an Operating System
You are highly advised NOT to install or change the Windows operating
system and drivers which are preloaded on MT-4308W/4310W without
professional instructions. Not only might the careless handling during
installation cause irreversible damage to your system, but also the improper
installation likely leads to system malfunction or failure. Please contact with
your dealers about the issues of operation system installation.
Performing System Recovery
For MT-4308W/4310W models with preloaded operating systems, you are
NOT encouraged to recover your system without the help of the system
integrators. Please be advised to contact your service center for further
assistance with system recovery.
Installing Optional Upgrade Kits
Posiflex MT-4308W/4310W can work with multiple optional upgrade kits,
such as MSR, Smart Card Reader and the like. For the detailed instructions,
refer to the user manual related to each peripheral devices.
13
Specifications
MT-4308W
MT-4310W
CPU
Intel Cherry Trail Atom x5-Z8350, 1.84GHz
DRAM Memory
2GB/4GB DDR3L (on-board memory)
Windows 10 IoT (64-bit)
OS
Windows Embedded 8.1
Industry Pro (64-bit only),
Windows 10 IoT (64-bit)
(No S0IX mode support)
Display
8” TFT LCD with LED
backlight,
1024 x 768 or 1280 x 800
10” TFT LCD with LED
backlight,
1280 x 800
Touch Screen
P-CAP touch
Storage
eMMC 32GB or 64GB
Wireless connectivity
WiFi IEEE 802.11ac, a/b/g/n dual +BT 4.0
Power Supply
5V/3A 15W power adaptor
Rear Camera
8M pixels
Internal Speaker
Yes
Ambient Light Sensor
Yes
Audio
Mic-in/Line out combo jack x 1
3G
Yes, optional
USB Port
Micro USB x1 (non OTG USB Port)
SIM Card
Yes, Nano card slot
(only available for MT-4308W/4310W with 3G module)
DC-in Jack
Yes
Power Switch Button
Yes
Battery Pack
3.7V/ 4800 mAh, 17.76 Wh
LED Indicator
Blue color LED x 1
Orange color LED x 1
eMMC 64GB
Optional Item
Smart Card Reader(*)
N/A
3G comm(*)
Full band 3G module
Yes
Sunlight readable
N/A
Sunlight readable panel
display
14
MT-4308W
MT-4310W
Attachment
TA-220
Side attachment with three-track MSR and RFID
TA-300
Side attachment with three-track MSR and finger print
sensor
TA-500
Battery Pack Kit
PG-200E
Pistol grip supports 1D/2D barcode scanning.
DS-300/310
Dock Station: USB 2.0 x 3 + GbE x 1 + Serial Port x 2 +
CR Port x 1 + 3” WiFi Printer x 1
Note: (*) Either smart card reader or 3G module can be installed into MT4310W system.
※ The product information and specifications are subject to change without
prior notice. To get the detailed information on the MT-4308W/4310W,
please check this model from Posiflex Global Website
15
<MEMO>
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising