advertisement
▼
Scroll to page 2
PROJECT NAME: LOCATION: ITEM NO: FX SERIES QTY: BEVERAGE/ICE CREAM COOLER MODEL FX-2UCB-290 Two undercounter refrigerated inserts with finished top, on casters. The FX Series revolutionizes point of use refrigeration by allowing the operator to adjust the temperatures from -5°F (freezer) operation up to 40°F (refrigerator) or any setting in between utilizing its unique convertible refrigeration system. Using a patented technology that provides 100% in-drawer cooling, this ultra-efficient self-contained system provides precise temperature control without compromising operator flexibility. MODEL NO: AIA NO: SIS NO: CSI SECTION: 11400 STANDARD FEATURES: • Convertible Refrigeration System (Refrigerator to Freezer) • Point-of-use Size and Design • Precise Temperature Control • Patented In-drawer Cooling System • Removable Insulated Drawer Compartment • Ambient Drawer Track System • Full-Extension Drawer System • 100% Front Breathing • Horizontal Gasket is Out of Harms Way • 14GA Stainless Steel Base on 6” Casters (Locking) REFRIGERATION SYSTEM: The FX Series uses a patented in-drawer cooling system that directs 100% of the cooling inside the insulated and removable drawer Insert (see below). The evaporator coil is mounted horizontally above the drawer Insert with an integral gasket that seals against the insulated drawer compartment when closed. The refrigeration system operates only when the drawer is closed, efficiently managing the air-flow while reducing energy and humidity build-up. Press-fit removable gasket with magnet-to-magnet seal is standard. DRAWER SYSTEM: The FX Series drawer system is the only full-extension, full product view, drawer system that has the drawer tracks outside the cooled compartment offering a more reliable, durable system not prone to the cold or debris environment common in traditional drawer systems. The full-extension tracks are constructed of corrosion resistant coated steel with a fully integrated support system. The drawer box and intermediate tracks are removable with simple tools and can only be reinstalled one-direction for proper fit. The drawer system has been tested with over 300,000 cycles without failure (90 pound test load per drawer). REMOVABLE INSULATED INSERT: This exclusive design allows full removal of the refrigerated compartment for cleaning or pre-loading. Made of high impact ABS plastic with high density polyurethane insulation. Provides unparalleled insulation value with no air gaps. Double drawer undercounter unit with finished top, on casters. Sampling of model FX-2UCB-290 shown. TEMPERATURE STATEMENT: The unit is provided with a electronic temperature controller that can be easily adjusted by the operator to any temperature setting between -5°F (freezer) operation up to 40°F (refrigerator). CABINET EXTERIOR: The cabinet exterior is high grade stainless steel where seen to allow long use and beauty while providing easy to maintain and clean surfaces. CABINET BASE/INTERIOR: The cabinet interior is high grade stainless steel where seen to allow long use and beauty while providing easy to maintain and clean surfaces. BASE: 14GA stainless steel base with 6” heavy duty locking casters. Ergonomically designed unit mounted on stainless steel base for ease of accessing stored product with limited bending. Unit can be removed from base and used as an undercounter refreigerator/ freezer. OPTIONS/ACCESSORIES: Recessed Handle(s) Poly Tub Divider Stainless Steel Tub Divider ELECTRICAL: Standard 115 volt with NEMA 5-15 cord and plug. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States. FX Series PPSPECFX2UCB RevB Revised 01/17 FX-2UCB-290 NEMA 5-15P D NEMA 5-15P Incorporating Adande® Technology D HP HP 28.0" [711] 54.0" [1372] 37.9" [963] 29.5" [750] TOP VIEW RIGHT SIDE VIEW DRAWER EXTENDED 25.4" [644] 4.4" [111] 15.2" [386] 43.5" [1106] 10.7" [272] 6" LOCKING FRONT CASTERS 27.0" [687] FRONT VIEW L 54” 5.4" [138] 1"x1" CORNER GUARDS TO HOLD FX UNITS IN PLACE A SINGLE 14GA. STAINLESS STEEL CARTTO HOLD (2) FX-1UC UNITS 5.6" [143] 29.5" [750] RIGHT SIDE VIEW D 29.5” H 43.5” No. of Drawers Storage (cubic feet) 2 5.66 Comp. Size 1/4 HP each Amp Draw (actual) 3.4 each Refrig. Power Usage (per day) 1.44 KW Freezer Power Usage Volt NEMA Ship Weight 3.66 KW 115 5-15p 900 (per day) (lbs) 888-994-7636, unifiedbrands.net © 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project