Randell FX-2WSRE-290 Spec Sheet

PROJECT NAME:
LOCATION:
ITEM NO:
FX SERIES
QTY:
WORK-TOP REAR ENGINE MODEL FX-2WSRE-290
Two refrigerated inserts with finished top, on casters, with rear compressor. The FX Series revolutionizes
point of use refrigeration by allowing the operator to adjust the temperatures from -5°F (freezer) operation up
to 40°F (refrigerator) or any setting in between utilizing its unique convertible refrigeration system. Using a
patented technology that provides 100% in-drawer cooling, this ultra-efficient self-contained system provides
precise temperature control without compromising operator flexibility.
MODEL NO:
AIA NO:
SIS NO:
CSI SECTION: 11400
STANDARD FEATURES:
• Convertible Refrigeration System (Refrigerator to
Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Compartment
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
• 3.5” Casters
REFRIGERATION SYSTEM: The FX Series
uses a patented in-drawer cooling system that directs
100% of the cooling inside the insulated and removable
drawer Insert (see below). The evaporator coil is mounted
horizontally above the drawer Insert with an integral gasket
that seals against the insulated drawer compartment
when closed. The refrigeration system operates only
when the drawer is closed, efficiently managing the
air-flow while reducing energy and humidity build-up.
Press-fit removable gasket with magnet-to-magnet seal is
standard.
DRAWER SYSTEM: The FX Series drawer system
is the only full-extension, full product view, drawer
system that has the drawer tracks outside the cooled
compartment offering a more reliable, durable system
not prone to the cold or debris environment common
in traditional drawer systems. The full-extension tracks
are constructed of corrosion resistant coated steel with
a fully integrated support system. The drawer box and
intermediate tracks are removable with simple tools and
can only be reinstalled one-direction for proper fit. The
drawer system has been tested with over 300,000 cycles
without failure (90 pound test load per drawer).
REMOVABLE INSULATED INSERT: This
exclusive design allows full removal of the refrigerated
compartment for cleaning or pre-loading. Made of
high impact ABS plastic with high density polyurethane
insulation. Provides unparalleled insulation value with
no air gaps.
Double stacked drawer unit with
finished top, on casters, with rear
compressor. Model FX-2WSRE-290
shown.
TEMPERATURE STATEMENT: The unit
is provided with a electronic temperature controller
that can be easily adjusted by the operator to any
temperature setting between -5°F (freezer) operation
up to 40°F (refrigerator).
CABINET EXTERIOR: The cabinet exterior is
high grade stainless steel where seen to allow long use
and beauty while providing easy to maintain and clean
surfaces.
CABINET BASE/INTERIOR: The cabinet
interior is high grade stainless steel where seen to
allow long use and beauty while providing easy to
maintain and clean surfaces.
ELECTRICAL: Standard 115 volt with NEMA
5-15 cord and plug. Hard wired plug in multi-stack
applications, allows up to three units on one wall
circuit.
ORIGIN OF MANUFACTURE: Designed and
manufactured in the United States.
OPTIONS/ACCESSORIES:
6” Leg Kit
Stainless Steel Back Panel
Additional Insulated Inserts:
Qty. _____
Pan Racks
Recessed Handle(s)
Poly Tub Divider
Stainless Steel Tub Divider
FX Series
PPSPECFX2WSRE RevC
Revised 01/17
FX-2WSRE-290 (REAR ENGINE)
Incorporating
Adande®
Technology
NEMA 5-15P
HP
D
34.5"
TOP
27.7"
35"
1.5"
35.5"
BUMPER
11"
32.6"
36.2"
31.1"
15.5"
35"
L
D*
H
No. of
Drawers
Storage
(cubic feet)
35”
34.5”
36.2”
2
6.2
Comp.
Size
1/4 HP
each
Amp
Draw
Refrig. Power
Usage
Freezer
Power Usage
Volt
NEMA
Ship
Weight
3.4
1.76 KW
3.3 KW
115
5-15p
635
(actual)
(per day)
(per day)
(lbs)
*Depth is 35.5” with bumper
888-994-7636, unifiedbrands.net
© 2018 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dover Corporation.