Logitech | Manuel utilisateur | SHAW DIRECT IRC600/ URC600 Remote Control Télécommande
Add to my manuals
2 Pages
advertisement
SHAW DIRECT IRC600/
URC600 Remote Control
Télécommande IRC600/
URC600 SHAW DIRECT
OVERVIEW
The Shaw Direct IRC600 IR and
URC600 IR/RF Remote Controls by
Universal Electronics are our latest generation universal remote controls. Their sophisticated technology allows you to consolidate up to three of your original home entertainment remote controls into one easy-to-use product.
The remote control requires installing two (2) new AA batteries
(included) and simple programming instructions to control your
TV. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference.
INSTALLING BATTERIES
1. Pull back the remote control’s battery cover and remove it.
2. Insert the two (2) supplied AA batteries according to the + and - marks in the battery case.
3. Push the battery cover back into place.
4. Test the unit by pressing the power key.
If batteries are inserted correctly, the
Red Light will blink.
NOTE: When batteries need replacement, the remote control will stop operating. Replace the old batteries with new AA batteries .
PROGRAMMING SAT CONTROL
Your remote control address is set at the factory to 000 to control all of the functions on your Motorola satellite receiver. However, if you have more than one satellite receiver, you may want to prevent the remote control in one room from affecting the satellite receiver in another room. To prevent this kind of interference, you must “pair” each remote control with each receiver by assigning a new “address” to each combination.
This “address” assignment is made using your remote control as follows:
1. Press the SAT button to select the remote control's SAT mode.
2. Press the OPTIONS button to display the Options screen on your TV.
3. On the Options Menu use the arrow
buttons and press ENTER/
OK to open the following menus. You can also press the indicated number on the remote control to access each menu directly.
6 System Setup (select models only)
4 System Settings
3 Installation Settings
2 Remote Control Address.
4. Once you are on the "Remote Control
Address screen" program the remote control using the remote control keypad programming sequence.
5. Press and hold the remote controls SAT mode key until the red lights flash at least twice and release the SAT key.
6. Enter a new 3 Digit SAT address from the below list using the number keys the remote control.
7. Press ENTER/OK to save the new address and pair the remote with your satellite receiver.
8. Press EXIT to leave the Options menu.
PROGRAMMING DEVICE CONTROL
The Shaw Direct IRC600 and URC600 Remote
Controls are preprogrammed to operate a
Motorola satellite receiver, a Sony TV, and
Sony DVD player. To program devices other than the default brands, perform the following steps; otherwise skip this section.
1. Turn on the TV or Auxiliary device.
NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. Press and hold Device key (TV or AUX) until the Red Lights flash at least twice, then release TV or AUX.
3. Locate the code for your device in
Manufacturer’s Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first.
4. Enter the first five-digit code for your
TV or Auxiliary Device. If you perform this procedure correctly, the Red Light will blink twice.
NOTE: If you enter an invalid code, the red light will not blink when entering the last digit and exit the programming mode. Repeat steps 2 to 4 with a valid code.
5. Aim the remote control at your TV or
Auxiliary Device and press Power once.
The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.
6. The TV or Auxiliary Device code will be stored in the remote control and will be automatically reprogrammed when the batteries are changed.
TV Code:
AUX Code:
PROGRAMMING CHANNEL
CONTROL LOCK
By default, the remote control’s channelcontrol capabilities are locked to the satellite receiver. The affected keys are 0 through 9,
CH+, CH- and LAST. This guarantees that you do not inadvertently change a channel on your TV. However, you can de-activate this feature to allow full access to these keys in the TV mode.
Unlocking Channel Control
1. On the remote control, press and hold
SAT until it blinks twice.
2. Enter 9-7-3. The SAT key blinks twice .
3. Press CH – once. The SAT key blinks four times.
Locking Channel Control to SAT
1. On the remote control, press and hold
SAT until it blinks twice.
2. Enter 9-7-3. The SAT key blinks twice.
3. Press CH+ one. The SAT key blinks twice.
SEARCHING FOR YOUR CODE
If your brand of Device does not respond to the remote control after trying all of the codes listed, or if your brand is not listed at all, try searching for your code.
1=TV, 2=DVD/VCR, 3=AUDIO
1. Turn on your Device.
2. Press and hold Device key (TV or AUX) until the Red Lights flash at least twice, then release TV or AUX.
3. Enter in 9 - 9 - 1. The Red Light will blink twice.
4. Press Digit 1 to search for a TV, Press
Digit 2 to search for a DVD/VCR or
Press Digit 3 to search for an Audio device.
5. While pointing the remote control at the Device, press and release the
CH + key until the Device turns off.
(Note: You may need to press [CH+] numerous times).
NOTE: In the search mode, the remote control will send IR codes from its library to the target device.
6. Press Device key (TV or AUX) once to lock in the code. The Red Light will blink twice.
CHECKING THE CODES
If you have set up the remote control using the Searching For Your Code procedure, you may need to find out which five-digit code is operating your TV. Perform the following steps after setting up your TV to find out which five-digit code operates your TV.
1. Press and hold TV until the Red Light flashes at least twice, then release TV.
2. Enter in 9 - 9 - 0. The Red Light will blink twice.
3. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of times the Red
Light blinks (e.g., 3 blinks =3) and write down the number in the left most TV
Code box (at end of this section).
NOTE: If a code digit is “0”, the red light will not blink.
4. Repeat step 3 four more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, 4 for the fourth digit and 5 for the fifth digit.
Finish writing down the code in the TV
Code boxes (at end of this section).
5. To check AUX code, repeat steps 1 through 4 using the AUX key in step 1.
6. To check SAT code, repeat steps 1 through 4 using the SAT key in step 1.
Note: When verifying the SAT Address only digits 1, 2 and 3 are required.
TV Code:
AUX Code:
CHANGING VOLUME CONTROL
On the Shaw Direct IRC600 and URC600
Remote Controls, Global Volume Lock is set to TV, so you can control TV volume while in the AUX, or SAT mode.
You can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.
Locking Volume to a Specific Mode.
1. Press and hold SAT until the Red Lights blink at least twice, then release SAT.
2. Enter in 9 - 9 - 3 (The Red Light will blink twice after the 3) .
3. Press and release the Mode Key (TV or
AUX) to lock Volume to.
Unlocking Volume from a Specific Mode.
1. Press and hold mode key to be unlocked (e.g. AUX) until the Red
Lights blinks at least twice, then release the mode.
2. Enter in 9 - 9 - 3 (The Red Light will blink twice after the 3).
3. Press and release the Volume Down
Key the Red light will flash 4 times.
USING THE MASTER POWER KEY
The Shaw Direct IRC600 and URC600
Remote Controls have a unique feature that allows you to sequentially turn up to three of your home entertainment devices on or off with a single key press.
NOTE: The MASTER POWER (Power) default setting is the SAT mode. If it is not programmed, only the Satellite receiver and TV will turn on or off. In the AUX or TV mode, pressing the Power key will only turn on or off the selected device.
PROGRAMMING THE MASTER
POWER KEY
1. Press and hold SAT until the Red Light blinks at least twice, then release SAT.
2. Enter in 9 - 9 - 5 The Red Light will blink twice.
3. Press and release each mode key once in the order that you want them in the
Master Power sequence.
4. Press and release the Power key (The red light under SAT will flash twice).
USING THE MASTER POWER KEY
After Programming, point the remote control at your devices and press and hold the
POWER key for 1.5 seconds
Removing the Master Power Key
1. Press and hold SAT until the Red Light blinks twice, then release SAT.
2. Enter in 9 - 9 - 5 The Red Light will blink twice.
3. Press and release the Power key (The red light under SAT will flash twice).
TROUBLESHOOTING
PROBLEM: Device key does not blink when you press a key.
SOLUTION: Replace the batteries with two
(2) new AA alkaline batteries
PROBLEM: Device key blinks when you press a key, but home entertainment device does not respond.
SOLUTION: Be sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.
PROBLEM: The remote control does not control home entertainment devices or commands are not performing properly.
SOLUTION: Try all listed codes for the device brand being set up.
Make sure all devices can be operated with an infrared remote control.
ADDITIONAL INFORMATION
This product does not have any userserviceable parts. Opening the case, except for the battery cover, may cause permanent damage to your
Shaw Direct IRC600 and URC600
Remote Controls.
• For help via the Internet, visit us at: www.shawdirect.ca
Copyright© 2010 by Universal
Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without prior written permission of Universal Electronics Inc.
COMPLIANCE WITH FCC RULES
AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged or try to correct the interference by one or more of the following measures:
• Increase or decrease the separation between the equipment and receiver.
• Consult the dealer or an experienced remote control/ TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment.
FCC AUTHORIZATION LABEL
FCC ID: MG33051
IC: 2575A-3051
Model URC-3051
Universal Electronics Inc
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
MANUFACTURER'S CODES
SETUP CODES FOR AUDIO
CODES DE RÉGLAGE POUR CHAÎNES
STÉRÉO
Aiwa
Akai
Alco
Altec Lansing
AMC
31405, 30189, 31388, 31641
31512
31390
32595, 32596
31077
Philco
Philips
Pioneer
Polaroid
Polk Audio
Primare
Proscan
RCA
Rio
Samsung
Sansui
Sanyo
Sherwood
McIntosh
Micromega
Mitsubishi
Myryad
Nakamichi
NexxTech
Norcent
Nova
Onkyo
Optimus
Oritron
Panasonic
Parasound
Sherwood New
Sonic Blue
Sony
Stereophonics
Sunfire
Teac
Technics
Thorens
Thule Audio
Toshiba
Venturer
Vizio
Wards
Yamaha
Zenith
JBL
JVC
Kenwood
KLH
Koss
Krell
Left Coast
Lexicon
LG
Linn
Liquid Video
Marantz
Magnavox
Mark Levinson
Daewoo
Denon
Elan
Fisher
Flextronics
Gateway
Halcro
Harman/Kardon
Hitachi iHome iLive
Insignia
Integra iSymphony
Amphion Media
AMW
Anam
Anthem
Apex Digital
Arcam
Audiotronic
Audiovox
31563
31563
31609
32220
31257, 31430, 31774
31189, 30189
31189
31390
B & K
Bose
30820
31229, 30639, 31629, 31841, 31933
Boston Acoustics 32162
Cambridge Sound 31370
Carver 31189, 30189
Cary Audio Design 31879
Coby
Curtis
31389
31389
31250
32134, 31360, 32279, 32857
30647
31801
31879
31517
31934
30892, 30189, 31304, 31306, 32241,
32443
31273, 31801
32435
32013
31030, 31077, 31751, 31893, 32126,
32169, 32175, 32472, 32474
31298, 31320, 31805
32018, 32258, 32442
31306
31374, 31495, 32040, 32161, 32239,
32331
31313, 31570, 31569
31390, 31428
31366, 31497
31837, 32463
30892
31802
31293, 32197, 32284
30189
31497
30892, 31892, 32138, 31189, 31269,
30189, 31289,32114
31189, 31269, 30189, 31514
32405
31289
31189
31393
31189
31313
31751
31389, 31751
31389
30842, 31298, 31320, 31531, 31805,
32451
30823, 31023
31366, 31497
31308, 31518, 31275, 31288, 31316,
31548, 31633, 31763, 31764, 32221,
32452, 32967
31934
31838
30892, 31189, 31269, 30189, 31266,
32311, 32459
30823, 31023, 31384, 31935
31508
30892, 32242, 30189, 31289, 32244,
32270
31851
31254
30823, 31023, 31609, 31254, 31390,
31511, 32041
31869
31295, 31304, 31500, 31868
30189
31469, 31801
31077, 31517, 31653, 31905, 32169
32169
31869
31759, 31058, 31441, 31258, 31622,
31558, 31658, 31758, 31822, 31858,
32172, 32216, 32320, 32475, 32522
31023
31313
31390, 31528
31308, 31518, 31633
31189
31851
31788
31390
31517
30189
30176, 30376, 31176, 31276, 31331,
31375, 31376, 31476, 31815, 32061,
32455, 32467, 32471
31293
SETUP CODES FOR DIGITAL MEDIA
CODES DE RÉGLAGE POUR
LECTEURS NUMÉRIQUES
MULTIMÉDIA
Apple
B & W
Denon
HTI
Vizio
Yamaha
ZVOX
31115
32441
32502
32439
32454
31797, 32021, 32458
32332, 32334
SETUP CODES FOR TELEVISION
CODES DE RÉGLAGE POUR TÉLÉVISEURS
Accurian
Action
Admiral
Advent
Akai
11803
10873
10463
10761, 10783, 10815, 10817, 10842
10812, 11675, 10702, 10030,
10672, 11676, 11935, 12232
Albatron
Ampro
AOC
Aomni
Apex Digital
Astar
Audiovox
Aventura
Axion
Bell & Howell
BenQ
Boxlight
Broksonic
10700, 10843
10751
10030, 11365, 11589, 11590,
12014, 12087, 12402, 12479
11623
10748, 10879, 10765, 10767,
10890, 11217, 12397
11531, 11738
10451, 10623, 10802, 10846,
10875, 11937, 11951, 11952
10171
11937
10154
11032, 11212, 11315
10893
10463, 11905, 11929, 11935, 11938
Byd:sign
C & M
Candle
Carnivale
11309
10700
10030
10030
Carver
CCE
10054
10623
Celebrity 10000
Celera 10765
Changhong 10765
Citizen 10060, 10030, 11669, 11671,
11672, 11928, 11935
11634, 12306, 12314, 12315, 12326,
12338, 12340, 12343, 12344, 12345,
Coby
12347, 12348, 12350, 12351, 12560
Commercial Solutio 11447, 10047
Crosley
CTX
Curtis
Cytron
10000, 10054
10700
11326, 12352, 12466
11326
Daewoo 10154, 10451, 11661,10623,
10661, 10672, 11928
11264, 11080, 11178, 11403, 11863 Dell
Denon 10145
Diamond Vision 11996
Digital Lifestyles 11765
Digital Projection 11750
11501 DirecTV
Disney 11665, 12152
Dream Vision 11164
Dumont
Durabrand
Dwin
Dynex
10017
10463, 10178, 10171, 11034, 11665
10720, 10774
11463, 11780, 11785, 11810, 12049,
12184
Electroband 10000
Electrograph 11755, 11623
Electrohome 10463, 11670, 11672
Element
Emerson
Emprex
Envision
Epson
ESA
Fisher
Fujitsu
Funai
Gateway
GE
GFM
Gibralter
Go Video
GoldStar
Grundig
Haier
Hallmark
Hanns.G
11687, 12183
11864, 10154, 10451, 10463, 10178,
10171, 11661, 10623, 11394, 11665,
11905, 11928, 11929, 11944, 11963
11422, 11765
10030, 10813, 11365, 11589, 12014,
12087
10833, 10840, 11290
10812, 10171, 11944, 11963
10154
10809, 10683, 10853
10000, 10171, 11271, 11904, 11963,
11979
11755, 11756
11447, 10047, 10051, 10451,
10178, 11347, 11922, 12359
10171, 11665, 11963, 12167
10017, 10030
10886, 11823
10178, 10030, 11926
10683
11034, 11749, 12309
10178
11783
Hannspree 11348, 11351, 11745, 11783
Harley Davidson 11904
Harman/Kardon 10054
Helios
Hello Kitty
10865
10451
Hewlett Packard 11494
Hisense
Hitachi
HP
10748, 11314, 11660, 12098, 12355,
12419
11643, 11145, 10145, 11345, 11904
11494
Humax
Hyundai
11501
10849, 11219, 11294 iLo 11286, 11603, 11665, 11684, 11990
Infinity 10054
InFocus 11164, 12199
Insignia 11423, 11564, 10171, 12432, 12417,
12088, 12049, 12002, 11963, 11892,
11780, 11710, 11660, 11641, 11517,
11326, 11204
Inteq 10017 iRIS 12189
JBL 10054
JCB 10000
JCM 12189, 12256
Jensen 10761, 10815, 10817, 11326
JVC 10463, 10053, 10650, 10731, 11253,
11601, 11774, 11923, 12271
KDS 11498, 11687
Kenwood 10030
KLH 10765, 10767
KMDS 12278
KTV 10030
LG 11423, 10017, 11265, 10178, 10700,
10856, 11178, 11768, 11934, 11993,
12358, 12424
Lloyd's 11904
LXI 10047, 10054, 10154, 10156, 10178
MAG 11498, 11687
Magnasonic 11928
Magnavox 11454, 11866, 10054, 10051, 10030,
10706, 10802, 11198, 11254, 11365,
11525, 11904, 11931, 11944, 11963,
11990, 12372
Marantz 11454, 10054, 10030, 10704,
10855, 11154, 11398, 12447
Matsushita 10250, 10650
Maxent 11755, 10762, 11211, 11714, 11757
Megapower 10700
Megatron 10178, 10145
Memorex 10154, 10463, 10150, 10178, 11665,
11670, 11892, 11924, 11926, 11927
MGA 10150, 10178, 10030
Midland 10047, 10017, 10051
Mintek 11603, 11990
Mitsubishi 11250, 10150, 10178, 10836, 10868,
11392
Monivision 10700, 10843
MTC 10060, 10030
NAD 10156, 10178, 10866, 11156
NEC 10030, 10704, 10882, 11398, 11704,
11797
NetTV 11755, 10762
Nexus Electronics 12183
Nikko 10178, 10030
Norcent 10748, 10824, 11365, 11589,
11590, 12110
Norwood Micro 11286
NuVision 11657, 12158
Olevia 11610, 11144, 11240, 11331
Optimus
Optoma
10250, 10154, 10650, 11924, 11927
11348
Orion 10463, 11463, 11905, 11929
Panasonic 10250, 11480, 11457, 10051, 10650,
11271, 11290, 11291, 11310, 11410,
11924, 11927, 11941, 11946, 11947,
12080
PARK 12104
Petters 11523
Philco 10054, 10030, 10171, 11271, 11394,
Philips
Pioneer
Planar
Polaroid
Portland
11665, 11963
11454, 11866, 10054, 10690, 11154,
11394, 11744, 11806, 11867, 12372,
12374
Pilot 10030
11457, 10679, 10866, 11260, 11398
11496
11523, 10765, 12425, 12120, 12117,
12063, 12002, 11992, 11769, 11767,
11766, 11763, 11762, 11687, 11498,
11341, 11328, 11326, 11314, 11286,
11276, 10865
10451, 11661
Prima 10761, 10783, 10815, 10817, 11785
Princeton 10700, 10717
Prism 10051
Projectiondesign 11750, 11752
Proscan 11447, 10047, 10030, 11347, 11922,
12147, 12256
Proton 10178
Proview 11498, 11687
Pulsar 10017
Quasar 10250, 10051, 10650, 11924
RadioShack 10047, 10154, 10178, 10030, 11904
RCA 11547, 11447, 10047, 10051, 12434,
12247, 12187, 12002, 11958, 11953,
11922, 11781, 11347, 11247, 11147,
11047, 10774, 10679, 10090
Realistic 10154, 10178, 10030
RevolutionHD 11623
Runco 10017, 10030, 10603, 11292, 11398,
11629
Sampo 11755, 10030, 10762
Samsung 10812, 10060, 10702, 10178, 10030,
10650, 10766, 10814, 11060, 11575,
11959, 12051
Sansui 10463, 10171, 11409, 11670, 11892,
11904, 11929, 11935
Sanyo 10054, 10154, 10088, 10799, 10893,
11142, 12448, 12452
Sceptre 10878, 11217, 11360, 11599, 12506
Scotch 10178
Scott 10178, 11711
Sears 10047, 10054, 10154, 10156, 10178,
10171, 11904, 11926
Seleco 11351
Sharp 10818, 10688, 10689, 10851, 11602
Sherwood 11399
Signature 10054
Sole 11623, 12075, 12076
Sony 10000, 10810, 10834, 11685, 11786,
11904, 11925
Soundesign 10178
Sova 11952
Soyo 11520, 11826
Spectroniq 11498, 11687
Squareview 10171
Studio Experience 10843
SunBrite 11420, 12337
Superscan 10864, 11944
Supreme 10000
SVA 10748, 10865, 10870, 10871, 10872,
11963
Sylvania 11864, 10054, 10030, 10171, 11271,
Syntax
11314, 11394, 11665, 11886, 11931,
11944, 11963
Symphonic 10171, 11394, 11904, 11944
Tatung
11610, 11144, 11240, 11331
11286, 11756
Technics 10250, 10051
Techview 10847, 12004
Techwood 10051
Teco 11040
Teknika 10054, 10150, 10060
Telefunken 10702
Thomas 11904
TMK 10178
TNCi 10017
Toshiba 11524, 10154, 10156, 11256, 11265,
TruTech
10060, 10832, 10854, 11156, 11164,
10822, 10650, 11356, 11656, 11704,
11935, 11936, 11945, 12006
11665, 11723, 12066
TVS 10463
US Logic 11286
Vector Research 10030
Venturer 11865
Victor 10053
Vidikron 10054, 11292, 11398, 11629
Vidtech 10178
Viewsonic 11755, 10857, 10864, 10885, 11330,
11578, 11627, 11640, 11742, 12014,
12087, 12277
Viore 11684, 11811, 12104, 12352
Vistron 12142
Vizio 11758, 10864, 10885, 11756
Waycon 10156
Westinghouse 11712, 10451, 10885, 10889, 10890,
White Westing.
Wyse
Yamaha
11282, 11300, 11577, 12293
10463, 11661, 10623
11365
10030, 10769, 10833, 10839, 11526
Zenith 10000, 11423, 10047, 10017, 10463,
11265, 10178, 10030, 11145, 10145,
11661, 11904, 11929
SETUP CODES FOR DVD PLAYERS
CODES DE RÉGLAGE POUR LECTEURS DVD
Accurian
Aiwa
20675, 21416
20641
Akai 20695, 20770, 21089
Alco 20790
Allegro 20869
Amphion Media 20872
AMW 20872
Apex Digital 20672, 20755, 20794, 20796, 20797,
21004, 21020, 21056, 21061, 21100,
22619
Arrgo 21023
Aspire Digital 21168, 21407
Astar 21489
Audio Authority 22555
Audiovox 20790
B & K 20655, 20662
BBK 21224
Bel Canto Design 21571
Blue Parade 20571
Bose 21895
Broksonic
California Audio
Cinea
20695, 20868
20490
20831
CineVision 20876, 20833, 20869
Citizen 20695, 21277, 22116
Coby 20778, 21086, 21107, 21177, 21628
Craig 20831
Curtis Mathes 21087
CyberHome
Daytek
20816, 20874, 21023, 21024, 21117,
21129, 21502, 21537
Daewoo 20784, 20705, 20833, 20869, 21169,
21172, 21234, 21242
20872
Denon 20490, 20634, 21634, 22258
Desay 21407
DigitalMax 21738
Disney 20675, 21270
Dual
Durabrand
21068, 21085
21023, 21127
DVD2000 20521
Dynex 22255
Electrohome 22116
Emerson 20591, 20675, 20821, 21268
Enterprise 20591
ESA 20821, 21268
Fisher 20670
Funai 20675, 21268, 21334
Gateway 21073, 21077, 21158
GE 20522, 20815
GFM 20675, 21268
Go Video 20744, 20715, 20741, 20783, 20833,
20869, 21044, 21075, 21099, 21158,
21304, 21730
GoldStar 20741, 20869
Gradiente 20651
Grundig 20539, 20705
Harman/Kardon 20582, 20702, 21229
Helios 22080, 22192
Hello Kitty 20831
Hitachi 20573, 20664
Hiteker 20672
Humax 21500, 21588 iLo 21348
Insignia
Integra
Irradio
JBL
JVC
Kawasaki
20675, 21268, 22095, 22255, 22428,
22596
20571, 20627, 21634, 21769, 22147
20646
20702
20558, 20623, 20867, 21164, 21275,
21550, 21602, 22365, 22472
20790
Kenwood
KLH
20490, 20534
20790, 21020, 21149
Koss 20651
Lasonic 20798
Lenoxx 21127
LG 20591, 20741, 20869, 21602, 22135
LiteOn 21058, 21158, 21416, 21440, 21656,
21738
Loewe 20511
Logitech 22639
Magnavox 20503, 20539, 20646, 20675, 20821,
Marantz
McIntosh
21177, 21268, 21354, 21506, 22229
20539, 22414
21533, 21273
Memorex 20695, 20831, 21270, 22213
Microsoft 20522, 22083
Mintek 20839
Mitsubishi 21521, 20521
NAD 20741, 22572
NEC 20785
NexxTech 21402
Norcent 21003, 20872, 21107, 21265
Nyko 22340
Olevia 22331
Onkyo 20503, 20627, 21612, 21769,
Oppo
22147, 22215
20575, 21224, 22185, 22545
20651
20490, 20503, 20632, 20703,
Oritron
Panasonic
21579, 21641, 21762
Philco 20675
Philips
PianoDisc
20503, 20539, 22056, 20646, 20675,
20854, 21158, 21260, 21267, 21340,
21354, 21506, 22084, 22434
21024
Pioneer 20525, 20571, 20142, 20631, 20632,
21460, 21512, 21571, 22442
Polaroid 21020, 21061, 21086
Polk Audio 20539
Portland 20770
Presidian 20675, 21738
Proceed 20672
Proscan 20522
ProVision 20778
Qwestar 20651
RCA 20522, 20571, 20790, 20822, 21022,
21132, 21769, 22213, 22392
RE-BL 22555
Rio 20869
Rotel
Rowa
20623, 21178
20823
Sampo 20698, 20752
Samsung 20490, 20573, 20199, 20820, 21044,
21075, 21470, 22069, 22329, 22369,
22489, 22556
Sansui 20695
Sanyo 20670, 20695, 20873
Schneider 20646
Sensory Science
Sharp
21158
20630, 20675, 20752, 21256,
22250, 22561
Sharper Image 21117
Sherwood 20770, 21043, 21077
Sherwood New 21077
Shinsonic 20533, 20839
Sonic Blue 20869, 21099
Sony 20533, 21533, 20864, 20772, 21033,
21070, 21431, 21516, 21536, 21633
Superscan 20821
Sylvania 20675, 20821, 21268, 22194
Symphonic 20675, 20821
Teac 20790
Technics 20490, 20703
Terapin 21031
Theta Digital 20571
Tivo 21503, 21512
Toshiba 20503, 20695, 21154, 21503, 21510,
Urban Concepts
21588, 21608, 21769,22006, 22277,
22705
20503
US Logic 20839
Venturer 20790
Viore 22553
Vizio 21064, 21226, 22563
WB Electronics 22555
Xbox 20522, 22083
Yamaha 20490, 20539, 20646, 20545, 20497,
20817, 21416, 22298, 22558
YBA 20872
Zektor 21730
Zenith 20503, 20591, 20741, 20869
Zoece 21265
SETUP CODES FOR BLU-RAY DVD PLAYERS
CODES DE RÉGLAGE POUR
LECTEURS DVD BLUE-RAY
Denon 22258
Insignia 20675, 22428, 22596
Integra 21769, 22147
JVC 22365
LG 20741, 21602
Magnavox 20675
Marantz 22414
Microsoft 22083
NAD 22572
Olevia 22331
Onkyo 21612, 21769, 22147
Oppo 22545
Panasonic 21641
Philips 22084, 22434
Pioneer 20142, 22442
RCA 21769
Samsung 20199
Sharp 22250, 22561
Sony 21516
Sylvania 20675, 22194
Toshiba 21769, 22705
Viore 22553
Vizio 22563
Xbox 22083
Yamaha 22298
SETUP CODES FOR VCR
CODES DE RÉGLAGE POUR
MAGNÉTOSCOPES
ABS 21972
Accurian 20000
Admiral 20048, 20209, 20479
Adventura 20000
Aiwa 20037, 20000
Alienware 21972
Allegro 20039, 21137
American High 20035
Audiovox 20037
Bell ExpressVu 21944
Bright House 22763
Broksonic 20184, 20121, 20209, 20479, 21479
Cable One 22763
Cablevision 22763
Calix 20037
Canon 20035
Carver 20081
Charter 22763
CineVision 21137
Citizen 20037, 21278
Comcast 22448, 22763
Cox 22763
Craig 20037
Crosley 20081, 20000
CyberPower 21972
Daewoo 20045, 21137, 21278
Dell 21972
Denon 20042
DirecTV 20739, 22033
Dish Network 21944
Dishpro 21944
Durabrand 20039, 20038
Dynatech 20000
Echostar 21944
Electrohome 20037, 20043
Electrophonic 20037
Emerex 20032
Emerson 20037, 20184, 20000, 20121, 20043,
20209, 20479, 2059, 21278, 21479,
21593
ESA 21137
Expressvu 21944
Fuji 20035, 20033
Funai 20000, 20593, 21593
Garrard 20000
Gateway 21972
GE
GFM
GOI
20060, 20035, 20807, 21035, 21060
21593
Go Video 20614, 21137
GoldStar
21944
20037, 20038, 21137, 21237
Gradiente 20000
Harley Davidson 20000
Harman/Kardon 20081, 20038
Headquarter 20046
Hewlett Packard 21972
Hitachi 20000, 20042, 20089, 20593
Howard Computers 21972
HP 21972
HTS 21944
Hughes Network
Humax
20042
20739
Hush 21972 iBUYPOWER 21972
Insight 22763
Instant Replay 20035
JVC 20067, 21944
KEC 20037
Kenwood 20067, 20038
Kodak 20035, 20037
LG 21037, 21137
Linksys 21972
Lloyd's 20000
LXI 20037
Magnasonic 20593, 21278
Magnavox 20035, 20039, 20081, 20000, 20149,
20563, 20593, 21593,21781
20035, 20081
20037
20035, 20162, 21162
Marantz
Marta
Matsushita
Media Center PC
MEI
Memorex
21972
Mediacom 22763
20035
20035, 20162, 20037, 20048, 20039,
20000, 20209, 20046, 20479, 21037,
21162, 21237, 21262
MGA 20043
Microsoft 21972
Mind
Minolta
Motorola
21972
20042
Mitsubishi 20067, 20043, 20807
MTC
20035, 20048, 22763
20000
Multitech 20000
NEC 20067, 20038
Nikko 20037
Niveus Media 21972
Northgate 21972
Olympus 20035
Orion 20184, 20209, 20479, 21479
Pace 22763
Panasonic 21062, 20035, 20162, 20225, 20614,
20616, 21035, 21162,21262
Pentax 20042
Philco
Philips
Pilot
20035
20739, 20035, 20081, 20618,
21081, 21181
20037
Pioneer 20067
Polk Audio 20081
Presidian 21593
Proscan 20060, 21060
Pulsar 20039
Quarter 20046
Quartz 20046
Quasar
RadioShack
Radix
Randex
RCA
Realistic
ReplayTV
20035, 20162, 21035, 21162
20000, 21037
20037
20037
20060, 20035, 20042, 20149,
20807, 20880, 21035, 21060
20035, 20037, 20048, 20000, 20046
20614, 20616
Ricavision 21972
Rio
Runco
21137
20039
Samsung 20045, 21014
Sanky 20048, 20039
Sansui 20000, 20067, 20209, 20479, 21479
Sanyo 20046
20184, 20045, 20121, 20043, 20210 Scott
Sears 20035, 20037, 20000, 20042, 20046,
21237
Sharp 20048, 20807, 20848
Shaw
Signature
Sonic Blue
Sony
22763
20035
20614, 20616, 21137
21232, 20032, 20035, 20033,
Stack 9
20000, 20636, 21032, 21972
21972
STS 20042
Suddenlink 22763
Sylvania 20035, 20081, 20000, 20043,
20593, 21593, 21781
Symphonic 20000, 20593, 21593
Systemax 21972
Tagar Systems 21972
Tashiko 20037
Teac 20000
Technics 20035, 20162
Teknika 20035, 20037, 20000
Thomas 20000
Time Warner 22763
Tivo
Toshiba
Totevision
Touch
Vector
20739, 20618, 20636, 21996, 22448
20045, 20043, 20209, 20210, 20845,
21008, 21145, 21972, 21996
20037
21972
20045
Vector Research 20038
Video Concepts 20045
Videomagic 20037
Viewsonic 21972
Villain 20000
Voodoo 21972
White West. 20209
20035, 20000 XR-1000
Yamaha
Zenith
ZT Group
20038
20037, 20039, 20033, 20000,
20209, 20479, 21137, 21479
21972
APERÇU
Les télécommandes Shaw Direct IRC600 IR et URC600 IR/RF fabriquées par Universal
Electronics sont nos télécommandes universelles de la toute dernière génération. Leur technologie sophistiquée vous permet de regrouper les fonctions de trois de vos télécommandes d’appareils de divertissement maison en un seul produit facile à utiliser.
La télécommande requiert l’installation de deux (2) piles AA neuves (comprises) et une programmation simple afin de faire fonctionner votre téléviseur. Pour obtenir les meilleurs résultats, veuillez lire et exécuter toutes les instructions décrites ici. Conservez ce guide pour référence ultérieure.
INSTALLATION DES PILES
1. Soulevez le couvercle du compartiment
6. Entrez une nouvelle adresse SAT à 3 chiffres tirée de la liste ci-dessous à l’aide des touches numériques de la télécommande.
7. Appuyez sur la touche ENTER/OK pour enregistrer la nouvelle adresse et assigner la télécommande à votre récepteur de signaux de satellite.
8. Appuyez sur la touche EXIT pour quitter le menu Options.
PROGRAMMATION DE LA
COMMANDE D’UN APPAREIL
Les télécommandes Shaw Direct IRC600 et
URC600 sont préprogrammées pour faire fonctionner un récepteur de signaux de satellite, un téléviseur Sony et un lecteur de DVD
Sony. Pour programmer la commande d’un appareil autre que les appareils par défaut, effectuez les étapes suivantes. Si ce n’est pas ce que vous souhaitez, ignorez cette section des piles et retirez-le.
2. Insérez les deux (2) piles AA qui sont fournies selon les marques « + » et « – »
à l’intérieur du compartiment des piles.
3. Remettez en place le couvercle du compartiment des piles.
4. Effectuez une vérification en appuyant sur la touche d’alimentation.
Si les piles sont insérées correctement, le voyant rouge clignotera.
NOTA : Lorsque les piles doivent être remplacées, la télécommande cesse de fonctionner. Remplacez les piles par des piles AA neuves.
PROGRAMMATION DE LA
COMMANDE SAT
L’adresse de votre télécommande est préréglée par le fabricant à 000 pour commander toutes les fonctions de votre récepteur de signaux de satellite Motorola. Toutefois, si vous avez plus d’un récepteur de signaux de satellite, vous voudrez peut-être empêcher la télécommande qui se trouve dans une pièce d’affecter le récepteur qui se trouve dans une autre pièce. Afin d’éviter ce type d’interférence, vous devez assigner chaque télécommande à un récepteur en attribuant une nouvelle adresse à chaque combinaison. Vous pouvez attribuer une adresse à l’aide de votre télécommande de la façon suivante :
1. Appuyez sur la touche SAT pour sélectionner le mode SAT de la télécommande.
2. Appuyez sur la touche OPTIONS pour afficher l’écran Options sur votre téléviseur.
3. Dans le Menu Options, utilisez les flèches de défilement et appuyez sur la touche ENTER/OK pour ouvrir les menus suivants. Vous pouvez également appuyer sur le numéro indiqué sur la télécommande pour avoir un accès direct à chaque menu.
6 Configuration du système (certains modèles seulement).
4 Réglages du système.
3 Réglages de l’installation.
2 Adresse de la télécommande.
4. Lorsque vous arrivez à l’écran « Adresse de la télécommande », vous pouvez programmer la télécommande à l’aide de la séquence de programmation du clavier de la télécommande.
5. Appuyez et maintenez appuyée la touche SAT de la télécommande jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez la touche SAT.
et passez à la suivante.
1. Allumez le téléviseur ou l’appareil auxiliaire.
NOTA : Veuillez lire entièrement les étapes
2 à 4 avant de procéder. Surlignez ou inscrivez les codes et l’appareil que vous souhaitez programmer avant de passer à l’étape 2.
2. Appuyez et maintenez appuyée la touche pour sélectionner l’appareil (TV ou
AUX) jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez la touche TV ou AUX.
3. Localisez le code de votre appareil dans la liste des codes des fabricants au verso de ce guide d’utilisation. Les marques sont inscrites par ordre alphabétique et les codes les plus populaires sont inscrits en premier.
4. Entrez le premier code à cinq chiffres pour votre téléviseur ou appareil auxiliaire. Si vous le faites correctement, le voyant rouge clignotera deux fois.
NOTA : Si vous entrez un code invalide, le voyant rouge ne clignotera pas lorsque vous entrerez le dernier chiffre et que vous quitterez le mode de programmation. Répétez les étapes 2 à 4 avec un code valide.
5. Pointez la télécommande vers le téléviseur ou l’appareil auxiliaire et appuyez sur la touche d’alimentation une fois.
L’appareil devrait s’éteindre. S’il ne répond pas, répétez les étapes 2 à 4 en essayant chacun des codes inscrits pour votre marque jusqu’à ce que vous en trouviez un qui fonctionne. Si cela ne fonctionne toujours pas, essayez de faire une Recherche de votre code.
6. Le code du téléviseur ou de l’appareil auxiliaire sera stocké dans la télécommande et il sera automatiquement reprogrammé lorsque les piles seront remplacées.
Code du téléviseur :
Code de l’appareil auxiliaire :
RÉGLAGE DU VERROUILLAGE DU
CONTRÔLE DES CANAUX
Par défaut, les paramètres de contrôle des canaux de la télécommande ne sont pas verrouillés en fonction du récepteur satellite.
Les touches concernées vont de 0 à 9, et comprennent également CH+, CH-, et LAST. Ainsi, vous ne risquez pas de modifier par accidentellement un canal associé à votre téléviseur, vous pouvez désactiver cette fonction pour disposer d'un accès complet à ces fonctions en mode TV.
Pour désactiver le verrouillage du contrôle des canaux
1. Sur la télécommande, appuyez sur la touché SAT et maintenez-la enfoncée jusqu'à ce que le voyant lumineux clignote deux fois.
2. Entrez le numéro 9 7 3 : la touche SAT clignotera deux fois .
3. Appuyez une fois sur la touche CH- : la touché SAT clignotera quatre fois
Pour activer le verrouillage du contrôle des canaux
1. Sur la télécommande, appuyez sur la touché SAT et maintenez-la enfoncée jusqu'à ce que le voyant lumineux clignote deux fois.
2. Entrez le numéro 9 7 3 : la touche SAT clignotera deux fois.
3. Appuyez une fois sur la touche CH+ : la touché SAT clignotera deux fois.
RECHERCHE DE VOTRE CODE
Si votre appareil ne répond pas à la télécommande après avoir essayé tous les codes inscrits ou si la marque de votre appareil n’est pas inscrite, essayez d’effectuer une Recherche de votre code.
1=Télé, 2=DVD/magnétoscope, 3=AUDIO
1. Allumez votre appareil.
2. Appuyez et maintenez appuyée la touche pour sélectionner l’appareil (TV ou
AUX) jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez la touche TV ou AUX.
3. Entrez 9 - 9 - 1. Le voyant rouge clignotera deux fois.
4. Appuyez sur le 1 pour rechercher un téléviseur, appuyez sur le 2 pour rechercher un DVD/magnétoscope ou appuyez sur le 3 pour rechercher un appareil audio.
5. Tout en pointant la télécommande vers l’appareil, appuyez et relâchez la touche CH + jusqu’à ce que l’appareil se ferme. Nota : vous devrez peut-être appuyer sur la touche [CH+] plusieurs fois.
NOTA : En mode Recherche, la télécommande enverra des codes IR de sa bibliothèque vers l’appareil cible.
6. Appuyez sur la touche de sélection des appareils (TV ou AUX) une fois pour verrouiller le code. Le voyant rouge clignotera deux fois.
VÉRIFICATION DES CODES
Si vous avez configuré la télécommande en utilisant la procédure de recherche de votre code, vous pouvez vouloir connaître le code
à cinq chiffres qui fait fonctionner votre téléviseur. Exécutez les étapes suivantes après avoir configuré votre téléviseur afin de connaître ce code à cinq chiffres qui fait fonctionner votre téléviseur.
1. Appuyez et maintenez appuyée la touche TV jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez-la.
2. Entrez 9 - 9 - 0. Le voyant rouge clignotera deux fois.
3. Pour connaître le code : pour le premier chiffre, appuyez sur 1 une fois et attendez 3 secondes. Ensuite, comptez le nombre de fois que les voyants rouges ont clignoté (p. ex. : 3 clignotements =
3) et inscrivez le numéro dans la case à l’extrême gauche (Code TV) à la fin de cette section.
NOTA : Si le chiffre du code est 0, le voyant rouge ne clignote pas.
4. Répétez l’étape 3 quatre fois de plus pour obtenir les chiffres restants. Utilisez
2 pour le deuxième chiffre, 3 pour le troisième chiffre, 4 pour le quatrième chiffre et 5 pour le cinquième. Terminez l’inscription du code dans les cases
(Code TV) à la fin de cette section.
5. Pour vérifier le code AUX, répétez les
étapes 1 à 4 en utilisant la touche AUX à l’étape 1.
6. Pour vérifier le code SAT, répétez les
étapes 1 à 4 en utilisant la touche SAT à l’étape 1.
Nota : Lors de la vérification de l’adresse
SAT, seuls les chiffres 1, 2 et 3 sont requis.
Code du téléviseur :
Code de l’appareil auxiliaire :
MODIFICATION DE LA
COMMANDE DU VOLUME
S ur les télécommandes Shaw Direct IRC600 et
URC600, le verrouillage du volume est contrôlé par le téléviseur de façon à ce que vous puissiez contrôler le volume en mode AUX ou SAT.
Vous pouvez effectuer un déverrouillage individuel du volume sur un appareil sélectionné afin de régler la commande du volume pour un fonctionnement indépendant.
Verrouillage du volume dans un mode spécifique.
1. Appuyez et maintenez appuyée la touche SAT jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez-la.
2. Entrez 9 - 9 - 3. Le voyant rouge clignotera deux fois après le 3 .
3. Appuyez sur la touche de mode (TV ou
AUX) et relâchez-la pour verrouiller le volume.
Déverrouillage du volume dans un mode spécifique.
1. Appuyez et maintenez appuyée la touche du mode à déverrouiller (ex.,
AUX) jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez-la.
2. Entrez 9 - 9 - 3. Le voyant rouge clignotera deux fois après le 3 .
3. Appuyez sur la touche VOL vers le bas et relâchez-la, le voyant rouge clignotera quatre fois.
UTILISATION DE LA TOUCHE
D’ALIMENTATION GÉNÉRALE
Les télécommandes Shaw Direct IRC600 et URC600 sont dotées d’une caractéristique unique leur permettant d’allumer ou d’éteindre jusqu’à trois de vos appareils de divertissement maison en appuyant sur une seule touche.
NOTA : Le réglage par défaut de la TOUCHE
D’ALIMENTATION GÉNÉRALE (Alimentation) est en mode SAT. Si la touche n’est pas programmée, seuls le récepteur de signaux de satellite et le téléviseur pourront être allumés ou éteints.
En mode AUX ou TV, si vous appuyez sur la touche d’alimentation, seul l’appareil sélectionné pourra être allumé ou éteint.
PROGRAMMATION DE LA TOUCHE
D’ALIMENTATION GÉNÉRALE
1. Appuyez et maintenez appuyée la touche SAT jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez-la.
2. Entrez 9 - 9 - 5. Le voyant rouge clignotera deux fois.
3. Appuyez et maintenez appuyée chacune des touches de mode dans l’ordre désiré dans la séquence d’alimentation générale.
4. Appuyez sur la touche Alimentation et relâchez-la, le voyant rouge sous SAT clignotera deux fois.
UTILISATION DE LA TOUCHE
D’ALIMENTATION GÉNÉRALE
Après l’avoir programmée, pointez la télécommande vers vos appareils et appuyez sur la touche Alimentation et maintenez-la appuyée pendant 1,5 seconde.
Suppression de la touche d’alimentation générale:
1. Appuyez et maintenez appuyée la touche SAT jusqu’à ce que les voyants rouges clignotent au moins deux fois, puis relâchez-la.
2. Entrez 9 - 9 - 5. Le voyant rouge clignotera deux fois.
3. Appuyez sur la touche Alimentation et relâchez-la, le voyant rouge sous SAT clignotera deux fois.
DÉPANNAGE
PROBLÈME : La touche de l’appareil ne clignote pas lorsque vous appuyez sur une touche.
SOLUTION : Remplacez les piles par deux
(2) piles alcalines AA neuves.
PROBLÈME : La touche de l’appareil clignote lorsque vous appuyez sur une touche, mais l’appareil de divertissement ne répond pas.
SOLUTION : Assurez-vous de bien pointer la télécommande vers l’appareil et d’être à moins de
4,5 m de l’appareil que vous tentez de faire fonctionner.
PROBLÈME : La télécommande ne peut pas commander les appareils ou les commandes ne fonctionnent pas correctement.
SOLUTION : Essayez tous les codes inscrits pour la marque d’appareil que vous voulez programmer.
Assurez-vous que tous les appareils puissent fonctionner
à l’aide d’une télécommande à infrarouge.
INFORMATIONS
SUPPLÉMENTAIRES
Ce produit ne présente aucune pièce pouvant être réparée par l’utilisateur. L’ouverture du boîtier, sauf le compartiment pour les piles, peut causer des dommages permanents à vos télécommandes Shaw Direct
IRC600 et URC600.
• Pour une assistance en ligne, rendez-vous sur le site : www.shawdirect.ca
Copyright © Universal Electronics inc., 2010.
Tous droits réservés. Aucune partie de cette publication ne peut être reproduite, transmise, transcrite, enregistrée sur un système de stockage ou traduite dans toute autre langue, sous quelque forme et par quelque moyen que ce soit, électronique, mécanique, optique, manuel ou autre, sans l’autorisation
écrite préalable de Universal Electronics Inc.
CONFORMITÉ AUX RÈGLEMENTS
DE LA FCC
Cet appareil a subi des essais et il a été démontré qu’il est conforme aux restrictions pour un appareil numérique de classe B, en vertu de la Partie 15 des règlements de la FCC. Ces restrictions sont établies pour procurer une protection raisonnable contre le brouillage nuisible dans une installation résidentielle. Cet appareil génère, utilise et peut transmettre par rayonnement une énergie radiofréquence. Par conséquent, s’il n’est pas utilisé conformément aux directives, cet appareil peut causer un brouillage nuisible aux communications radio.
Toutefois, il n’existe aucune garantie que le brouillage ne se produira pas dans une installation particulière. Si cet appareil cause du brouillage nuisible à la réception radio ou de télévision, l’utilisateur est encouragé à tenter de mettre fin au brouillage en utilisant l’une ou plusieurs des mesures suivantes :
• augmenter ou réduire la distance entre l’appareil et le récepteur.
• consulter le détaillant ou un technicien expérimenté en télécommandes ou en téléviseurs pour obtenir de l’aide.
Cet appareil a subi des essais et il a été démontré qu’il est conforme aux restrictions pour un appareil numérique de classe B en vertu des règlements de la FCC. L’utilisateur est avisé que les changements ou modifications qui ne seraient pas expressément approuvés par le fabricant peuvent annuler le droit de l’utilisateur à utiliser l’appareil.
FCC AUTHORIZATION LABEL
FCC ID: MG33051
IC: 2575A-3051
Model URC-3051
Universal Electronics Inc
Cet appareil est conforme aux restrictions
établies dans la Partie 15 des règlements de la FCC. Son fonctionnement est assujetti aux deux conditions suivantes :
1. Cet appareil ne peut pas causer d’interférence nuisible.
2. Cet appareil doit accepter toute interférence reçue, y compris les interférences causant un fonctionnement non désiré.
MIRC600 03/11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement