Synexis CHP

Charger

Picture with handheld transmitter and receiver Supply without transmitter / receiver

F C

EATURES

• Two charging compartments for beltpack receivers/transmitters or handheld transmitters • External power adapter

OMPONENTS

Synexis CHP Two charging compartments for beltpack receivers/transmitters or handheld transmitters . . . . . Order # 721.522

A

RCHITECT

’

S

S

PECIFICATIONS

Desktop charger with charging compartments for two beltpack receivers/transmitters or handheld microphones. Automatic rechargeable battery/standard battery recognition. Individuelle Each charging compartment with individual display of the charging or error status via the operating control LED of the transmitter/receiver.

Rugged plastic housing. Supplied with power supply unit.

Manufacturer: Type: beyerdynamic Synexis CHP 1 of 2 beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 [email protected] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com

Non-contractual illustrations. Contents subject to change without notice. E3 / Synexis CHP (09.16)

A

PPLICATIONS

The Synexis CHP charger is provided with two charging compart ments for two Synexis TH handheld transmitters, TP beltpack transmitters or RP beltpack receivers, when they are powered by rechargeable NiMH batteries. The charging state of the rechargeable batteries is indicated by an LED of the appropriate transmitter or receiver. The device is powered by the supplied power adapter.

S

UPPLIED

A

CCESSORY

• Power adapter with multifunction connector

T

ECHNICAL

S

PECIFICATIONS

Input . . . . . . . . . . . . . . . . . . . . . . . . . AC 100 - 240 V / 50/60 Hz Output . . . . . . . . . . . . . . . . . . . . . . . . DC 5 V / 2.5 A, 12.5 W (max.) Charging current per socket . . . . . . . . 430 - 470 mA Power consumption . . . . . . . . . . . . . . max. 6 W Max. charging time. . . . . . . . . . . . . . . approx. 5 hours Ambient temperature . . . . . . . . . . . . . -5 to +40 °C [23 to 104 °F] Dimensions (W x D x H) . . . . . . . . . . . 210 x 106 x 71.4 mm [8.3" x 4.2" x 2.8"] Weight (without power adapter). . . . . 1.04 kg [2.3 lbs] Charging compartments . . . . . . . . . . . 2 for handheld transmitter, beltpack transmitter / receiver

Synexis CHP

C

ONSUMER

A

LERT

Most users do not need a license to operate this wireless micro phone system. Nevertheless, operating this microphone without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

D

IMENSIONS

Purchasers should also be aware that FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.

210 [8.268''] All dimensions in mm and [inch].

2 of 2 beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204 [email protected] | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com

Non-contractual illustrations. Contents subject to change without notice. E3 / Synexis CHP (09.16) 106 [4.173'']