Rosewill RNWA-PoE-4065 4-Port PoE Injector Hub User Manual

DEVICE LAYOUT

RNWA-PoE-4065 Thank you for purchasing a Rosewill PoE Injector. Please read the instruction manual before use and retain for future reference.

DC POWER

LED INDICATORS LED Indicator

PWR PoE (1-4)

Color

Green Green

Status

On Off On Off

Operation

Ultra PoE Injector is on.

Ultra PoE Injector is off.

PoE function is enabled.

PoE function is disabled.

1

FCC STATEMENT

This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates and radiates radio frequency energy and, if not installed and used in accordance with the user manual, may cause interference in which case users will be required to correct interference at their own expense.

CE MARK WARNING

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

HARDWARE INSTALLATION

1. Plug the power cord into the device and the other end into an electrical outlet.“PWR” LED will be on.

2. Connect the RJ45 cable from the “Data In” port on the Injector Hub to the Ethernet port of your switch.

3. Connect your IEEE 802.3af/at compliant Powered Devices (PD) to the “PoE Out” port on the Injector Hub with suitable network cable. The device will automatically supply power to remote PD. Now, “PoE” LED indicators will be on.

4. Ensure the PDs are on and all Ethernet cables are connected correctly and tightly.

PACKAGE CONTENTS

• 1 x RNWA-PoE-4065, 4-Port Gigabit Power over Ethernet (PoE) Injector Hub • 1 x 65 Watts Power Adapter • 1 x Power Cord • 1 x User Manual • 4 x Rubber Feet 2

APPLICATION DIAGRAM

= Data = Power Power PoE Injector

4 3 2 1 1 2 3 4

+ PoE Device Network Switch 100 m

GROUNDING (RECOMMENDED)

RNWA-PoE-4065 provides ancillary grounding to enhance electrostatic discharge (ESD) protection.

1. Loosen the ground screw and secure a ground wire (not included) to the grounding point.

2. Secure the other end of the ground wire to a grounding block or other grounded structure.

3

PRODUCT SPECIFICATIONS

Standard Compliance PoE Power Supply Type Interface PoE Power Output Total Power Consumption Power Requirement LED Indicators Dimensions Weight Operating Environment

IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3af/at Power over Ethernet Endspan, 1/2(+), 3/6(-) Data In Ports / PoE Out Ports 4 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X Ports 4 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X Ports Per Port 56VDC, Max. 30 Watts 65 Watts 56VDC External Power Adapter 1 x PWR LED 4 x PoE LEDs 120 x 78 x 32 mm (4.72 x 3.07 x 1.26 in) 280g (9.88oz) Operating: 0°C to 40°C (32°F to 104°F) Storage: -20°C to 70°C (-4°F to 158°F) Humidity: 20 to 95% (Non-Condensing) Note: If you connect to a legacy device that is not PoE compatible,RNWA PoE-4065 will not deliver power to the legacy device.This feature allows you to freely and safely mix legacy and PoE compatible devices on your network.

Technical Support Information [email protected] 1-800-575-9885 Please register your product at www.rosewill.com for complete warranty information and support for your product.

RNWA-PoE-4065_A