Commax CAV-43MG/CAV-43MG2 GATE VIEW MONITOR Owner Manual

User Manual
Color Video Door Phone CAV-43MG
�
• Thank
Thank you
you for
for purchasing
purchasing COMMAX
COMMAX products.
products.
�
• Please
Please carefully
carefully read
read this
this User’s
User’s Guide
Guide (in
(inparticular,
particular,precautions
precautionsfor
forsafety)
safety)before
beforeusing
usingaaproduct
productand
andfollow
follow
instructions
instructions to
to use
use aa product
product exactly.
exactly.
�
• The
The company
company isis not
not responsible
responsible for
for any
any safety
safetyaccidents
accidentscaused
causedby
byabnormal
abnormaloperation
operationof
ofthe
theproduct.
product.
Table of Contents
1.Greeting················································································································
1
2. Warnings and caution ·····························································································
2
3. Part name and functions ·······················································································
4
4. Operating ·············································································································
5
5. Set up····················································································································· 6
6. RESET ··················································································································· 9
7. The use of lobby phone (In case there are common lobby) ···············································10
8. Wiring Installation Method ··························································································11
9. PART NAME AND FUNCTIONS ··················································································12
10. Specifications ········································································································12
1. Greeting
Thank you for purchasing a COMMAX product
Please, use the product after carefully reading this Manual
● This type of videophone can be used in apartments, villas and other buildings as a
multifunctional device with door opening, telephone conversation and guard station
control function
●
●
1
2. Warnings and caution
Please follow the things described below in order to prevent any
danger or property damage.
Prohibition.
Warning
No disassembly
It may cause a serious damage or injury if
violated.
No touch
Caution
It may cause a minor damage or injury if violated.
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
Power & Installation
Warning
2
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please don’t bend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’t handle the
power cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please don’t install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please don’t install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please don’t use and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
Cleaning & Use
Warning
Please don’t disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please don’t insert any
metallic or burnable materials
into the ventilation hole.
·It may cause an electric
shock or fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
Cleaning & Use
Power & Installation
Caution
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please don’t install the
product on an unstable place
or small support board.
·It may cause an injury if it
falls down while in use.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please
don’t use any chemical
products such as wax,
benzene, alcohol or cleanser.)
Please don’t drop the
product on the ground and
don’t apply a shock .
·It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·It may reduce the product
performance.
3
3. Part names and functions
번호
내
용
번호
내
용
1
Power ON/OFF switch
2
Power LED
3
Microphone
8
MENU(Menu button)
4
Monitor(LCD) : It shows the visitor’s image.
9
Talk button
5
Monitor button(SELECT button)
10
Speaker
6
Guard button (DOWN button)
11
Terminal for external connection
7
Door release button (UP button) : It’s for door
release or moving to the other menu item
1. Power ON/OFF switch : It’s for the product’s ON/OFF.
2. Power LED : It shows the product’s ON status.
3. Microphone
4. Monitor(LCD) : It shows the visitor’s image.
5. Monitor button(SELECT button) : It shows the status of camera, during the menu selection.
6. Guard button (DOWN button) : It’s for calling to the guard station or moving the other menu item.
7. Door release button (UP button) : It’s for door release or moving to the other menu item
8. MENU(Menu button) :
It’s available to move to product’s setup menu for adjusting the screen and receiver volume.
9. Talk button: It is used for a response to a visitor’s calling and talk.
10. Speaker
11. Terminal for external connection :
It’s for the connection of door camera and lobby and guard station
4
4. Operating
4-1. Call from door camera
① When a visitor at the door calls, it chimes and the image of the visitor is shown on the screen.
② By pressing MONITOR BUTTON, you can talk to a person at the door. If you press
DOOR RELEASE BUTTON, the door is released.
(It is possible only when the door camera is interlocked with door release function)
③ The chime bell rings when there is a call from (common entrance/guard station) while you
are communicating with a person at the door. If you press the button (common entrance :
MONITOR BUTTON / guard station: guard button), the phone call from the door is cut off
and then a call from common entrance or guard station is connected.
④ The screen is turned off automatically after 60seconds from starting talking. If you want to
check screen again, please press MONITOR BUTTON
⑤ To finish to talk, press TALK BUTTON
4-2. Call from lobby phone
① When a visitor at common entrance calls, it chimes and the image of the visitor is shown on
the screen.
② By pressing MONITOR BUTTON, you can talk to a person at the common entrance.
(The screen is turned off automatically after 60 seconds from pressing MONITOR BUTTON to
talk.)
③ The chime bell rings when there is a call from door while you are communication to a
person at the common entrance. If you press MONITOR BUTTON, the phone call from
common entrance is cut off and then a call from the door is connected.
④ If you DOOR RELEASE BUTTON while you are communicating with a person at common
entrance, common entrance is released with door release sound and the phone call is cut off.
4-3. Talk with guard station
(1) Call from guard station
① it chimes when there is a call from guard station.
② By pressing GUARD BUTTON to talk.
③ If there is a call from door while you are communicating with a person at guardstation,
it chimes and the image of visitors is shown. If you press MONITORBUTTON, the phone call
from guard station is cut off.
(2) To make a phone call to the guard station
① By pressing GUARD BUTTON, you can call the guard station.
② If someone at the guard station answers your call, you can start to talk.
5
4-4. Monitoring
(1)In case both lobby and individual cameras are installed Click the monitor button once in
standby mode to check the images from Individual camera. Click the button twice for Lobby
images and three times for returning to standby mode. (Note. It is not available during the talk.
During the monitoring
- (Calling is available with the camera by pressing the talk button during the monitoring.)
(2) In case only lobby is installed
Click monitor button once in standby mode to check the images from the lobby and
click the button twice to return to standby mode
- (Calling is available by pressing the talk button during the monitoring.)
4-5. Interlocking with Digital Door Lock
This product can be interlocked with Digital Door Lock via RF module and please refer to
connection diagram.
5. Set up
•Use 4 function keys positioned right side of the product.
Start or end menu : MENU
Select or Input : SELECT button(Monitor button)
Move upward / Move right : UP button (Door release button)
Move downward / Move left : DOWN button (Guard station button)
5-1. Screen and receiver volume adjustment
Press the MENU button in use of conversation or monitoring, then adjust DOOR(LOBBY),
VIDEO SET, UTIL SET and INFORMATION using UP/DOWN button.
5-1-1. DOOR(LOBBY) VIDEO SET(Adjusting BRIGHTNESS/CONTRAST/COLOR)
In video adjustment mode 5-1, move to DOOR(LOBBY) VIDEO SET and press SELECT button
(LOBBY VIDEO SET should be done during calling from lobby phone or talking with lobby phone)
(1) BRIGHTNESS : Adjust BRIGHTNESS
(2) CONTRAST : Adjust CONTRAST
(3) COLOR : Adjust COLOR
※ Adjusting Brightness/Contrast/Color
① Move to DOOR(LOBBY) VIDEO SET in display setting mode 5-1 and press
SELECT BUTTON. And then press the SELECT button with UP/DOWN button, move to the
6
related item.
② Press the SELECT button to enter the menu.
③ Adjust the values with UP/DOWN button
④ After adjusting, press the SELECT button and save the setup.
(4) RESET : It initializes the screen setup.
※ Setting Method
① In Setting mode to move DOOR VIDEO SET please press SELECT button
Press UP/DOWN button to move RESET category.
② Press SELECT button to select category.
③ Press UP/DOWN button to select YES.
④ Press SELECT button
[Precaution: Screen Setting and Reset functions must be adjust separately ( DOOR / LOBBY )]
(5) EXIT : Return to previous MENU.
5-1-2. UTILITY (Other Functions)
5-1의 In Screen Setting Mode move to UTILITY Option and press SELECT button to enter
to the MENU.
(1) SPEAKER VOLUME : Adjust the volume for receiver sound
※ Setting Method
① In Setting Mode to move UTILITY option and press SELECT button to control UP/DOWN
button to move SPEAK-VOLUME category.
② Press SELECT button to select category.
③ Press UP/DOWN button to set Volume control.
④ When you set, press SELECT button to save
(2) SCREEN MODE : to set screen ratio
① 5-1In Setting Mode to move UTILITY category and press SELECT button to move
SCREEN MODEL by UP/DOWN button.
② Press SELECT button to select category.
③ Press UP/DOWN button to set screen rate and then please press SELECT button to save.
- ZOOM: 4:3 Ratio ZOOM IN (Expanded image of Real Rate),
- 4:3: Real Ratio of the Camera Image.
- WIDE: Image of 16:9 Ratio will be shown on the screen.
(3) EXIT : Return to previous MENU.
5-1-3. CHIME-BELL VOLUME
In Screen Setting Mode move to UTILITY Option and press SELECT button to enter to the MENU.
UP Button ( OPEN ) DOWN Button ( GUARD ) UTILITY ( EXTRA FUNCTION & INFORMATION )
(1) CHIME-BELL VOLUME : To set calling mute and adjust volume
※ Setting Method
① 5-1-2 Move to UTILITY category and press SELECT button(Monitor) to move
CHIME-BELL VOLUME by UP/DOWN button.
7
② Press SELECT button to select category.
③ Press UP/DOWN button to control CHIME-BELL VOLUME. The user can check all of
CHIME-BELL VOULME size.
④ Press the SELECT button when you set up.
(2) EXIT : Return to previous MENU.
5-2. System Configuration
In Stand By Mode press the Menu button for 3 seconds to enter the System Setting Mode.
UP BUTTON-OPEN DOWN BOTTON-GUARD HOME SET-HOUSEHOLD AN INFORMATION
5-2-1. HOME SET (Input the Residence Information)
5-2 Press the moving button in System Setting Mode to move to HOME SET and press
SELECT button.
(1) HOME ID : Adjust the Building / Apartment Number Information.
※ Configuration Method
① Press the moving button in System Setting Mode to move to HOME SET and press
SELECT button. Press UP/DOWN button to move HOME ID.
② Press SELECT button to select category.
③ It will be display actual builng number/house number in monitor.
[Default Value is Building 1234 – Apartment Number 5678]
④ Press UP/DOWN button to select number and input the number.
: It is in total 8 digits, and must not have empty
(Ex : In case of Building 101 , Apartment No. 1 ( Input 0101 – 0001)
⑤ If you finish to input the last 8 digits please press the SELECT button to save.
(2) PASSWORD : Password setting of the residence
※ Configuration Method
① 5-2 First move to HOME SET and press SELECT button and move to PASSWORD by
UP/DOWN button.
② Press SELECT button to select category.
(To move PASSWORD category and press SELECT button to enter PASSWORD Mode)
③ Press UP/DOWN button to select number and input the number.
(Input the new PASSWORD and automatically saved as 1234 and then you have to
reset PASSWORD.)
[Precaution : Avoid repetitive numbers. For security propose 0000, 1234 and 4321
can’t be used as PASSWORD]
④ When you finish to input number and Press SELECT button to save. Press SELECT
button to save the configuration.
8
(3) LOBBY ID : If connect up to 2 lobby phones, you have to sletct main Lobby phone.
※ Setting Method
① 5-2 In SYSTEM SETTING MODE to move HOME SET category and press SELECT
buttom to move LOBBY ID by UP/DOWN button.
② Press SELECT button to select category (Standard: 01)
③ Press UP/DOWN button to input from 01 to 39. (MAIN LOBBY ID)
④ Press SELECT button to save the configuration.
(4) EXIT : Return to previous MENU.
5-2-2. INFORMATION (Product and Version Information)
5-1 When you move the INFORMATION category Product Information will be shown.
(1) MODEL : Display Product Name.
(2) VERSION : Display the Product Program Version.
(3) HOME ID : Display Residence Building / Apartment Number Information.
(4) VIDEO : The monitor (LCD) display for video standard transmission method.
(5) TOUCH : Display the Touch Program Version.
(6) SOURCE : The monitor(LCD) display the position of camera currently
(LOBBY/COMMONENTRANCE)
6. RESET
In Stand By Mode press the door release button and Guard buttonfor 3 seconds to inicial.
※ Precaution :When you reset all of the program please be careful to erase all of the
informations ( Screen , CHIME-BELL VOULME,households and building number etc.)
9
7. The use of lobby phone (In case there are common lobby)
1) When paging the household
●Enter the household number you want to cal.1
ex) household 101⇒1, 0, 1
●Household number appears on FND
●Press the Call button (E)
●Conversation begins when they answer.
2) When paging guard station
●Press the guard button
●‘gUAd’appears on FND
●Press the Call button (E)
● Emit call house along with flickering of ‘gUAd’.
●Conversation begins when guard station answers.
3) Opening the door with RF card
●Press the Household number
●Press the Key button (K)
●Letters of ‘PASS’ flicker on the FND.
●Press the 4-digit password.
●Appears ‘----’ on the FND.
●Press the Call button
●Door is open with flickering of ‘oPEn’ on FND .
[Reference for use]
Contact guard station or management station if you
don’t remember the password
Press the
Call button (E).
Wait for a reply
10
Press the Page button.
A paging tone will sound.
Press the Guard button.
Wait for a reply
Press the Call button (E).
Press the Electronic key button.
Enter the Household Number.
ex) To open the door of unit 101
Enter the Household PIN.
Press the Page button.
Press the Call button (E).
4) Opening the door with registered RF card (optional function)
●Put the RF card on the sensor positioned right below of
camera lens to open the door. Door will be opened along
with a message of ‘oPEn’ on FND.
Please the Card Here
[Reference for use]
1. If you try to open the door with unregistered RF
card, it will be notified to guard station. Please
try again after registering it at the guard station
or management office.
2. If RF card still doesn’t work after proper
registering procedure, it is not usable card.
Press the page button.
A paging tone will sound.
Enter the Household Number.
ex) unit 101
OPEN DOOR
8. Wiring Installation Method
11
9. PART NAME AND FUNCTIONS
② Bracket for wall mount
① Body of CAV-43MG
④ T4 X 18(4EA)
Screw for wall mount
③ Manual
⑥ 2P Connector(2EA)
4P Connector(1EA)
10P Connet(1EA)
⑤ M3 X 6(1EA)
Screw for body
10.Specifications
제원
모델명
Wires
Power source
100-240V~, 50/60Hz (FREE VOLTAGE)
Power consumption
Operation : 10W, Standby : 4W
Communication
Full Duplex communication
Screen
4.3" TFT LCD
Ringing tone
Talk Duration
Distance
Individual door : Electric sound(3 tones 2 consecutive).
Guard station : Electric chime
Standby : 30sec, Call time : 60sec, Guard 180±10sec
Individual camera : 28m(Ø0.5) / Common lobby : 300m(UTP)
Guard station : 1Km(Ø0.5)
Temperature
0 ~+40℃ (32℉ ~ 104℉)
Warranty Period
1 year
Environment Condition
Product Life-Cycle
12
CAV-43MG
Individual door : 4 wires(polarity), Lobby : 8 wires(polarity)
Storage Temperature
-40 °C to 50 °C
Storage Humidity
Less than 90 %
10 years
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
Printed In Korea / 2017.01.104