Polaris Scrambler 850 Owner's Manual

2019
OWNER’S MANUAL
SCRAMBLER 850
Read this manual carefully. It contains important safety information.
This is an adult vehicle only.
Operation is prohibited for those under 16 years of age.
! WARNING
Read, understand, and follow all of the instructions and safety
precautions in this manual and on all product labels.
Failure to follow the safety precautions
could result in serious injury or death.
! WARNING
Operating, servicing, and maintaining a passenger vehicle or off-road
vehicle can expose you to chemicals including engine exhaust, carbon
monoxide, phthalates, and lead, which are known to the State of California
to cause cancer and birth defects or other reproductive harm. To minimize
exposure, avoid breathing exhaust, do not idle the engine expect as
necessary, service your vehicle in a well-ventilated area and wear gloves
or wash your hands frequently when servicing your vehicle.
For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
For videos and more information
about a safe riding experience with
your Polaris vehicle, scan this QR
code with your smartphone.
A card containing important ATV safety information should be attached to
the owner’s manual on the next page. If you cannot locate this card, or if it
has been removed, please call 1–800–342–3764 for assistance.
2019 Owner’s Manual
Scrambler® 850
POLARIS®, ACE™, OUTLAW®, and SPORTSMAN® are trademarks of
POLARIS Industries Inc.
Copyright 2018 Polaris Industries Inc. All information contained within this
publication is based on the latest product information at the time of
publication. Due to constant improvements in the design and quality of
production components, some minor discrepancies may result between the
actual vehicle and the information presented in this publication. Depictions
and/or procedures in this publication are intended for reference use only. No
liability can be accepted for omissions or inaccuracies. Any reprinting or
reuse of the depictions and/or procedures contained within, whether whole or
in part, is expressly prohibited.
The original instructions for this vehicle are in English. Other languages are
provided as translations of the original instructions.
Printed in U.S.A.
9929559
WELCOME
Thank you for purchasing a POLARIS vehicle, and welcome to our world-wide
family of POLARIS enthusiasts. Be sure to visit us online at www.polaris.com for
the latest news, new product introductions, upcoming events, career
opportunities and more.
Here at POLARIS we proudly produce an exciting line of utility and recreational
products. We believe POLARIS sets a standard of excellence for all utility and
recreational vehicles manufactured in the world today. Many years of experience
have gone into the engineering, design, and development of your POLARIS
vehicle, making it the finest machine we’ve ever produced.
•
•
•
•
•
•
Snowmobiles
SPORTSMAN® All-terrain vehicles
Low emission vehicles (LEVs)
RANGER® utility vehicles
BRUTUS® work vehicles
SLINGSHOT® three wheel
motorcycles
•
•
•
•
•
RZR® sport vehicles
GEM® vehicles
INDIAN® motorcycles
POLARIS POWER® generators
POLARIS DEFENSE® combat
vehicles
• Timbersled® Snow Bikes
For safe and enjoyable operation of your vehicle, be sure to follow the
instructions and recommendations in this owner’s manual. Your manual contains
instructions for minor maintenance, but information about major repairs is
outlined in the POLARIS Service Manual and can be performed by a factory
certified Master Service Dealer® (MSD) technician.
Your POLARIS dealer knows your vehicle best and is interested in your total
satisfaction. Your POLARIS dealership can perform all of your service needs
during, and after, the warranty period.
3
WELCOME
4
Introduction . . . . . . .
Safety . . . . . . . . . .
Features and Controls . .
Operation . . . . . . . .
Winch Guide. . . . . . .
Emission Control Systems .
Maintenance . . . . . .
Specifications . . . . . .
POLARIS Products . . . .
Troubleshooting . . . . .
Warranty . . . . . . . .
Maintenance Log . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 7
11
27
55
73
83
85
119
123
125
129
137
5
6
INTRODUCTION
INTRODUCTION
This POLARIS vehicle is an off-road vehicle. Familiarize yourself with all laws
and regulations concerning the operation of this vehicle in your area.
WARNING
Failure to heed the warnings and safety precautions contained in this manual
can result in severe injury or death. Your POLARIS vehicle is not a toy and can
be hazardous to operate. This vehicle handles differently than cars, trucks or
other off-road vehicles. A collision or rollover can occur quickly, even during
routine maneuvers like turning, or driving on hills or over obstacles, if you fail to
take proper precautions.
• Read this owner’s manual and review the safety DVD that came with your
vehicle. A free extra copy of the DVD can be obtained by contacting your
local POLARIS dealer. Understand all safety warnings, precautions and
operating procedures before operating the vehicle. Keep this manual with
the vehicle.
• Never operate this vehicle without proper instruction. Take an authorized
training course. Visit www.rohva.org or call 866-267-2751.
• This vehicle is an ADULT VEHICLE ONLY. You MUST be at least age 16
and have a valid driver’s license to operate this vehicle.
• Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants
and over-the-ankle boots.
• Never use this vehicle with drugs or alcohol, as these conditions impair
judgment and reduce operator reaction time.
• Complete the New Operator Driving Procedures outlined in this manual.
Never allow a guest to operate this vehicle until the guest has completed the
New Operator Driving Procedures.
• Never permit a guest to operate this vehicle unless the guest has reviewed
the owner’s manual and all safety labels and has completed a safety training
7
INTRODUCTION
SAFETY SYMBOLS AND SIGNAL WORDS
The following signal words and symbols appear throughout this manual and on
your vehicle. Your safety is involved when these words and symbols are used.
Become familiar with their meanings before reading the manual.
DANGER
DANGER indicates a hazardous situation which, if not avoided, WILL result in
death or serious injury.
WARNING
SAFETY ALERT WARNING indicates a hazardous situation which, if not
avoided, COULD result in serious injury.
CAUTION
SAFETY ALERT CAUTION indicates a hazardous situation which, if not
avoided, COULD result in minor to moderate injury.
CAUTION
CAUTION indicates special precautions that must be taken to avoid vehicle
damage or property damage.
IMPORTANT
IMPORTANT provides key reminders during disassembly, assembly, and
inspection of components.
NOTICE
NOTICE provides key information by clarifying instructions.
The Prohibition Safety Sign indicates an action NOT to take in order
to avoid a hazard.
The Mandatory Action Sign indicates an action that NEEDS to be
taken to avoid a hazard.
8
INTRODUCTION
EUROPEAN VIBRATION AND NOISE
The driver-perceived noise and hand/arm and whole body vibration levels of this
machinery is measured per EN 15997.
The operating conditions of the machinery during testing:
The vehicles were in like-new condition. The environment was controlled as
indicated by the test procedure(s).
The uncertainty of vibration exposure measurement is dependent on many
factors, including:
•
•
•
•
•
Instrument and calibration uncertainty
Variations in the machine such as wear of components
Variation of machine operators such as experience or physique
Ability of the worker to reproduce typical work during measurements
Environmental factors such as ambient noise or temperature
VEHICLE IDENTIFICATION NUMBERS
Record your vehicle's identification numbers and key number in the spaces
provided. Remove the spare key and store it in a safe place. An ignition key can
be duplicated only by ordering a POLARIS key blank (using your key number)
and mating it with one of your existing keys. The ignition switch must be
replaced if all keys are lost.
The manufacturer’s label is located on the front right side of the vehicle behind
the radiator.
Vehicle Model Number (VIN) q
Frame VIN
Engine Serial Number w
Key Number
9
10
SAFETY
SAFETY
SAFETY TRAINING
ATV safety training is a top priority for POLARIS. POLARIS strongly encourages
you and any family members who will be riding the ATV to take a training course.
If you purchased a new POLARIS ATV in the United States, your dealer
provided information about the authorized ATV RiderCoursesm that is available
to you and your eligible family members. This training is included in the
purchase price of your ATV. You were also provided with printed materials that
explain safe operating procedures. You should review this information on a
regular basis.
If you purchased a used POLARIS ATV in the United States, you can enroll in
the ATV RiderCoursesm for a fee. Call ATV Enrollment Express at (800) 8872887 or visit www.atvsafety.org. If you purchased a POLARIS ATV outside the
United States, please contact your dealer or local law enforcement agencies for
information about safety training.
A POLARIS ATV is an off-road vehicle. Familiarize yourself with all laws and
regulations concerning the operation of this vehicle in your area. We strongly
advise you to strictly follow the recommended maintenance program outlined in
your vehicle manual. This preventive maintenance program is designed to
ensure that all critical components on your vehicle are thoroughly inspected at
specific intervals.
FOR MORE INFORMATION ABOUT ATV SAFETY in the United States, call
the Consumer Product Safety Commission at 1-800-638-2772, or visit
www.cpsc.gov, visit www.atvsafety.org, or call POLARIS at 1-800-342-3764.
SAFE RIDING GEAR
Always wear helmet, eye protection, gloves, longsleeve shirt, long pants, over-the-ankle boots and
seat belt (if equipped) at all times. Protective gear
reduces the chance of injury.
q Helmet
w Eye Protection
e Long Sleeves
r Gloves
t Long Pants
y Over-the-Ankle Boots
11
SAFETY
HELMET
Wearing a helmet can prevent a severe head injury. Whenever riding this
POLARIS vehicle, always wear a helmet that meets or exceeds established
safety standards.
Approved helmets in the USA and Canada bear a U.S.
Department of Transportation (DOT) label.
Approved helmets in Europe, Asia and Oceania bear
the ECE 22.05 label. The ECE mark consists of a
circle surrounding the letter E, followed by the
distinguishing number of the country which has
granted approval. The approval number and serial
number will also be displayed on the label.
EYE PROTECTION
Do not depend on eyeglasses or sunglasses for eye protection. Whenever riding
this POLARIS vehicle, always wear shatterproof goggles or use a shatterproof
helmet face shield. POLARIS recommends wearing approved Personal
Protective Equipment (PPE) bearing markings such as VESC 8, V-8, Z87.1, or
CE. Make sure protective eye wear is kept clean.
GLOVES
Wear gloves for comfort and for protection from sun, cold weather and other
elements.
BOOTS
Wear sturdy over-the-ankle boots for support and protection. Never ride a
POLARIS vehicle with bare feet or sandals.
CLOTHING
Wear long sleeves and long pants to protect arms and legs.
12
SAFETY
SAFETY WARNINGS
WARNING
Failure to operate this vehicle properly can result in a collision, loss of control,
accident or rollover, which may result in serious injury or death. Heed all safety
warnings outlined in this section of the owner’s manual and in the safety DVD
provided with your vehicle. See the OPERATION section of the owner’s
manual for proper operating procedures.
OPERATING WITHOUT INSTRUCTION
Operating this vehicle without proper instruction increases the risk of an
accident. The operator must understand how to operate the vehicle properly in
different situations and on different types of terrain.
All operators must read and understand the owner's
manual and all warning and instruction labels before
operating the vehicle.
All operators should review the safety DVD provided
with this vehicle and take a ROHVA training course
(www.rohva.org).
AGE RESTRICTIONS
This vehicle is an ADULT VEHICLE ONLY. Operation
is prohibited for anyone under 16 years of age or
anyone without a valid driver’s license.
The operator must be tall enough to sit with back
against the seat, both feet flat on the floor and both
hands on the steering wheel (if equipped) or
handlebars.
USING ALCOHOL OR DRUGS
Operating this vehicle after consuming alcohol or
drugs could adversely affect operator judgment,
reaction time, balance and perception.
Never consume alcohol or drugs before or while
operating this vehicle.
13
SAFETY
FAILURE TO INSPECT BEFORE OPERATING
WARNING
Failure to inspect and verify that the vehicle is in safe operating condition
before operating increases the risk of an accident.
Always perform the pre-ride inspection before each use of your vehicle to
make sure it's in safe operating condition.
Always follow the inspection and maintenance procedures and schedules
described in this owner’s manual.
HANDLING GASOLINE
Gasoline is highly flammable and explosive under certain conditions.
• Always exercise extreme caution whenever handling gasoline.
• Always refuel with the engine stopped, and outdoors or in a well ventilated
area.
• Do not smoke or allow open flames or sparks in or near the area where
refueling is performed or where gasoline is stored.
• Do not overfill the tank. Do not fill the tank neck.
• If gasoline spills on your skin or clothing, immediately wash it off with soap
and water and change clothing.
EXPOSURE TO EXHAUST
Engine exhaust fumes are poisonous and can cause loss of consciousness or
death in a short time. Never start the engine or let it run in an enclosed area.
Operate this vehicle only outdoors or in well-ventilated areas.
PROTECTIVE APPAREL
Riding in this vehicle without wearing an approved helmet and protective eye
wear increases the risk of a serious injuries in the event of an accident.
Always wear a helmet, eye protection, gloves, long-sleeve shirt, long pants and
over-the-ankle boots.
OPERATING ON PAVEMENT
This vehicle's tires are designed for off-road use only, not for use on pavement.
Operating this vehicle on paved surfaces (including sidewalks, paths, parking
lots and driveways) may adversely affect the handling of the vehicle and may
increase the risk of loss of control and accident or rollover. Avoid operating the
vehicle on pavement. If it's unavoidable, travel slowly, travel short distances and
avoid sudden turns or stops.
14
SAFETY
OPERATING ON PUBLIC ROADS
Operating this vehicle on public streets, roads or
highways could result in a collision with another
vehicle. Never operate this vehicle on any public
street, road or highway, including dirt and gravel roads
(unless designated for off-highway use).
OPERATING AT EXCESSIVE SPEEDS
Operating this vehicle at excessive speeds
increases the operator's risk of losing control.
Always operate at a speed that's appropriate for
the terrain, the visibility and operating conditions
and your skills and experience.
PHYSICAL CONTROL OF THE VEHICLE
Removing even one hand or foot can reduce ability to control the vehicle or
could cause loss of balance and ejection from the ATV.
If a person's feet are not firmly planted on the footrests, they could come into
contact with the wheels or other moving parts and lead to accident or injury.
Always keep both hands on the handlebars and both feet on the footrests of the
ATV during operation.
TURNING IMPROPERLY
Turning improperly could cause loss of traction, loss of control, accident or
rollover. Always follow proper procedures for turning as described in this owner’s
manual.
Avoid sharp turns. Never turn while applying heavy throttle. Never make abrupt
steering maneuvers. Practice turning at slow speeds before attempting to turn at
faster speeds.
15
SAFETY
JUMPS AND STUNTS
Exhibition driving increases the risk of an accident or
rollover. DO NOT do power slides, “donuts”, jumps or
other driving stunts. Avoid exhibition driving.
IMPROPER HILL CLIMBING
Improper hill climbing could cause loss of control or rollover. Use extreme
caution when operating on hills. Always follow proper procedures for hill climbing
as described in this owner's manual. See the New Operator Driving Procedures
section for details.
DESCENDING HILLS IMPROPERLY
Improperly descending a hill could cause loss of control or rollover. Always
follow proper procedures for traveling down hills as described in this owner’s
manual. See the New Operator Driving Procedures section for details.
CROSSING HILLSIDES
Driving on a sidehill is not recommended. Improper procedure could cause loss
of control or rollover. Avoid crossing the side of any hill unless absolutely
necessary.
If crossing a hillside is unavoidable, always follow proper procedures as
described in this owner's manual. See the New Operator Driving Procedures
section for details.
OPERATING ON STEEP HILLS
Operating on excessively steep hills could cause an overturn.
Never operate on hills too steep for the ATV or for your abilities.
• Never operate a 1-up ATV on hills steeper than 25 degrees.
16
SAFETY
STALLING WHILE CLIMBING A HILL
Stalling, rolling backwards or improperly dismounting
while climbing a hill could cause a rollover.
• Always maintain a steady speed when climbing a
hill.
• Always move the 4X4 switch to 4WDC (if equipped)
before ascending or descending a hill.
If all forward speed is lost:
•
•
•
•
Lean forward to keep body weight uphill. A passenger should also lean uphill.
Apply the brakes.
Lock the parking brake when fully stopped.
Dismount on the uphill side of the vehicle, or on the left if the vehicle is
pointing straight uphill. Have a passenger dismount first, then the operator
may dismount.
• Turn the ATV around and remount, following the procedure described in the
owner's manual.
If the ATV begins rolling downhill:
• Keep operator and passenger body weight uphill.
• Never apply engine power.
• Never apply the rear brake while rolling backwards. Apply the single-lever
brake gradually.
• When fully stopped, apply the rear brake as well, and then lock the parking
brake.
• Dismount on the uphill side of the vehicle, or on the left if the vehicle is
pointing straight uphill. Have a passenger dismount first, then the operator
may dismount.
• Turn the ATV around and remount, following the procedure described in the
owner's manual.
17
SAFETY
OPERATING ON SLIPPERY TERRAIN
Failure to use extra caution when operating on
excessively rough, slippery or loose terrain could
cause loss of traction, loss of control, accident or
overturn.
Do not operate on excessively rough, slippery or loose
terrain until you've learned and practiced the skills
necessary to control the vehicle on such terrain.
Always use extra caution on rough, slippery or loose
terrain.
OPERATING IN UNFAMILIAR TERRAIN
Failure to use extra caution when operating on unfamiliar terrain could result in
an accident or rollover.
Unfamiliar terrain may contain hidden rocks, bumps, or holes that could cause
loss of control or rollover.
Travel slowly and use extra caution when operating on unfamiliar terrain. Always
be alert to changing terrain conditions.
IMPROPER TIRE MAINTENANCE
Operating this vehicle with improper tires or with
improper or uneven tire pressure could cause loss of
control or accident.
Always use the size and type of tires specified for your
vehicle.
Always maintain proper tire pressure as described in
the owner's manual and on safety labels.
OPERATING IMPROPERLY IN REVERSE
Improperly operating in reverse could result in a collision with an obstacle or
person. Always follow proper operating procedures as outlined in this manual.
See the New Operator Driving Procedures section for details.
Before shifting into reverse gear, always check for obstacles or people behind
the vehicle. When it's safe to proceed, back slowly.
OPERATING OVER OBSTACLES
Improperly operating over obstacles could cause loss of control or rollover.
Before operating in a new area, check for obstacles. Avoid operating over large
obstacles such as large rocks and fallen trees. Always follow the proper
procedures outlined in this manual when operating over obstacles. See the New
Operator Driving Procedures section for details.
18
SAFETY
SKIDDING OR SLIDING
Failure to use extra caution when operating on
excessively rough, slippery or loose terrain could
cause loss of traction, loss of control, accident or
rollover. Do not operate on excessively slippery
surfaces. Always slow down and use additional
caution when operating on slippery surfaces.
Skidding or sliding due to loss of traction can cause loss of control or rollover (if
tires regain traction unexpectedly). Always follow proper procedures for
operating on slippery surfaces as described in this owner's manual. See the
New Operator Driving Procedures section for details.
OPERATING A DAMAGED VEHICLE
Operating a damaged vehicle can result in an accident. After any rollover or
other accident, have a qualified service dealer inspect the entire machine for
possible damage, including (but not limited to) seat belts, rollover protection
devices, brakes, throttle and steering systems.
OPERATING THROUGH WATER
Operating through deep or fast-flowing water can cause loss of traction, loss of
control, rollover or accident. Never operate in fast-flowing water or in water that
exceeds the floor level of the vehicle.
Always follow proper procedures for operating in water as described in this
owner’s manual. See page 60.
Wet brakes may have reduced stopping ability. After leaving water, test the
brakes. Apply them lightly several times while driving slowly. The friction will help
dry out the pads.
IMPROPER CARGO LOADING
Overloading the vehicle or carrying/towing cargo improperly may cause changes
in stability and handling, which could cause loss of control or an accident.
•
•
•
•
Always follow the instructions in this owner’s manual for carrying cargo.
Never exceed the stated load capacity for this vehicle.
Cargo should be properly distributed and securely attached.
Reduce speed when carrying cargo or pulling a trailer. Allow a greater
distance for braking.
19
SAFETY
OPERATING ON FROZEN BODIES OF WATER
Severe injury or death can result if the vehicle and/or the operator fall through
the ice. Never operate the vehicle on a frozen body of water unless you have
first verified that the ice is sufficiently thick to support the weight and moving
force of the vehicle, you and your cargo, together with any other vehicles in your
party.
Always check with local authorities and residents to confirm ice conditions and
thickness over your entire route. Vehicle operators assume all risk associated
with ice conditions on frozen bodies of water.
POOR VISIBILITY
Operating this vehicle in darkness or inclement weather could result in a
collision or accident, especially if operating on a road or street. This vehicle is
not equipped with highway-approved lights. Operate this vehicle off-road only.
Use caution and drive at reduced speeds in conditions of reduced visibility such
as fog, rain and darkness. Clean headlights frequently and replace burned out
headlamps promptly.
PHYSICAL SKILLS
Safe operation of this rider-active vehicle requires good judgement and physical
skills. Persons with cognitive or physical disabilities who operate this vehicle
have an increased risk of overturn and loss of control.
HOT EXHAUST SYSTEMS
WARNING
Exhaust system components are very hot during and after use of the vehicle.
Hot components can cause burns and fire. Do not touch hot exhaust system
components. Always keep combustible materials away from the exhaust
system.
Use caution when traveling through tall grass, especially dry grass. Always
inspect the underside of the vehicle and areas near the exhaust system after
driving through tall grass, weeds, brush, and other tall ground cover. Promptly
remove any grass or debris clinging to the vehicle.
UNAUTHORIZED USE OF THE VEHICLE
Leaving the keys in the ignition can lead to unauthorized use of the vehicle by
someone under the age of 16, without a drivers license, or without proper
training. This could result in an accident or rollover. Always remove the ignition
key when the vehicle is not in use.
20
SAFETY
EQUIPMENT MODIFICATIONS
Your POLARIS vehicle is designed to provide safe operation when used as
directed. Modifications to your vehicle may negatively impact vehicle stability.
Failure of critical machine components may result from operation with any
modifications, especially those that increase speed or power. This vehicle may
become less stable at speeds higher than those for which it is designed. Loss of
control may occur at higher speeds.
Do not install any non-POLARIS-approved accessory or modify the vehicle for
the purpose of increasing speed or power. Any modifications or installation of
non-POLARIS-approved accessories could create a substantial safety hazard
and increase the risk of bodily injury.
The POLARIS limited warranty on your POLARIS vehicle will be terminated if
any non-POLARIS approved equipment and/or modifications have been added
to the vehicle that increase speed or power.
The addition of certain accessories, including (but not limited to) mowers,
blades, tires, sprayers, or large racks, may change the handling characteristics
of the vehicle. Use only POLARIS-approved accessories, and familiarize
yourself with their function and effect on the vehicle.
FOR MORE INFORMATION ABOUT SAFETY
call POLARIS at 1-800-342-3764.
21
SAFETY
SAFETY LABELS AND LOCATIONS
Warning labels have been placed on the vehicle for your protection. Read and
follow the instructions on each label carefully. If any of the labels shown in this
manual differ from the labels on your vehicle, always read and follow the
instructions of the labels on the vehicle.
If an informational or graphic label becomes illegible or comes off, contact your
POLARIS dealer to purchase a replacement. Replacement safety labels are
provided by POLARIS at no charge. The part number is printed on the label.
q General Warning
w Reverse Override Warning
e Age Warning
r 4x4 Caution
22
t Clutch Warning (Under Seat)
y “No Passenger” Warning
u Tire Pressure/Load Warning
i Rack Warning
SAFETY
GENERAL WARNING
WARNING
Improper use can result in SEVERE INJURY or DEATH
ALWAYS USE AN APPROVED HELMET AND PROTECTIVE GEAR
NEVER USE ON PUBLIC ROADS
NEVER CARRY PASSENGERS
NEVER USE WITH DRUGS OR ALCOHOL
NEVER operate:
•
•
•
•
without proper training or instruction
at speeds too fast for your skills or the conditions
on public roads - a collision can occur with another vehicle
with a passenger - passengers affect balance and steering and increase risk
of losing control
ALWAYS:
• use proper riding techniques to avoid vehicle overturns on hills and rough
terrain and in turns
• avoid paved surfaces - pavement may seriously affect handling and control
LOCATE AND READ OWNER’S MANUAL.
FOLLOW ALL INSTRUCTIONS AND WARNINGS.
23
SAFETY
TIRE PRESSURE/LOAD WARNING
WARNING
Improper tire pressure or overloading can cause loss of control. Loss of control
can result in severe injury or death.
• Cold tire pressure:
– Front: 7.0 psi (48.3 kPa)
– Rear: 7.0 psi (48.3 kPa)
• Maximum weight capacity: 290 lbs. (131 kg)
• Lug nut torque values: 75 ft-lbs. (102 Nm)
RACK/BOX WARNING
WARNING
• DO NOT TOW FROM RACK OR BUMPER. Vehicle damage or tipover may
result causing severe injury or death. Tow only from tow hooks or hitch.
• Maximum Rack Loads: Front 25 lbs. (11 kg) Rear 50 lbs. (23 kg)
4X4 (AWD) CAUTION
CAUTION
Do not push switch to engage 4X4 (AWD) if the rear wheels are spinning. This
may cause severe drive shaft and clutch damage.
“NO PASSENGER” WARNING
WARNING
NEVER ride as a passenger. Passengers can cause a loss of control, resulting
in SEVERE INJURY or DEATH.
DISCRETIONARY WARNING
WARNING
• Never operate this ATV on HILLS steeper than 25
degrees 25°. To prevent overturn on hilly terrain,
use throttle and brakes gradually, and shift weight
uphill.
• REVERSE operation can be dangerous even at low
speeds. Steering becomes difficult. To prevent loss
of control, avoid sudden braking or sharp turns.
24
SAFETY
AGE 16 WARNING
The Age 16 warning is located on the left-hand wheel
well.
WARNING
Operating this ATV if you are under the age of 16
increases your chance of severe injury or death.
NEVER operate this ATV if you are under age 16.
REVERSE OVERRIDE WARNING
WARNING
Improper use of override button can lead to loss of control resulting in severe
injury or death. Do not activate override while throttle is engaged. Always apply
throttle gradually while in reverse.
CLUTCH COVER WARNING
WARNING
• Moving parts hazard under belt-clutch guard. To prevent serious injury, do not
operate vehicle with guard removed.
• Do not modify engine or clutch. Doing so can cause part failure, possible
imbalance, and excessive engine RPM, which can result in serious injury or
death.
25
26
FEATURES AND CONTROLS
FEATURES AND CONTROLS
CONTROLS
q Key Ignition Switch
w Engine Stop Switch
e Mode/Reverse Override Switch
r Headlight Switch
t 4x4 Switch
y Throttle Lever
IGNITION SWITCH/LIGHT SWITCH
Use the ignition switch to start the engine. The key can be removed from the
switch when it is in the OFF position.
OFF
Turn the key to the OFF position to stop the engine. Electrical circuits are off.
RUN
Turn the key the RUN position to activate electrical components. Electrical
circuits are on. Electrical equipment can be used.
START
Turn the key to the START position to engage the electric starter. See the
Starting the Engine section for starting procedures.
27
FEATURES AND CONTROLS
ENGINE STOP SWITCH
Move the stop switch w either left or
right to the OFF position to stop the
engine quickly.
Move the stop switch to the RUN
position before attempting to start the
engine. The engine will not start or run
when the switch is off. Both the main
switch and the engine stop switch will
shut off all electrical power to the
vehicle, including lights.
MODE/REVERSE OVERRIDE SWITCH
WARNING
Pressing the override button while the throttle is open can cause loss of
control, which may result in serious injury or death. Always release the throttle
before pressing the override button.
This vehicle is equipped with a reverse
speed limiter system. To gain additional
wheel speed while backing, release the
throttle and depress the override button
e. The reverse override button also
acts as a MODE button when held down
for approximately one half second. The
override button will not function as a
MODE button if the transmission is in
reverse.
HEADLIGHT SWITCH
Use the headlight switch to turn the
lights on and off and to change the
lights from high beam to low beam. The
key must be in the ON position and the
engine stop switch must be in the RUN
position.
28
FEATURES AND CONTROLS
4X4 SWITCH (IF EQUIPPED)
The drive mode switch t controls the
All Wheel Drive (AWD/4X4) system.
Use this switch to engage AWD (4X4)
or 2X4. The vehicle automatically
engages 4X4 when operating in reverse
if the drive mode is set to AWD (4X4).
See page 36 for drive mode (AWD)
operating instructions.
THROTTLE LEVER
WARNING
Operating an ATV with sticking or improperly operating throttle controls could
cause an accident. Never start or operate an ATV that has a sticking or
improperly operating throttle. Immediately contact your POLARIS dealer or
other qualified person for service if throttle problems arise.
Failure to check or maintain proper operation of the throttle system can result
in an accident if the throttle lever sticks during operation. Always check the
lever for free movement and return before starting the engine. Also check
occasionally during operation.
Modifications to the electronic throttle control could result in failure to perform
as designed, which could result in an accident. Do not attempt to modify the
throttle control system or replace it with any after market throttle mechanisms.
Engine speed and vehicle movement
are controlled by pressing the throttle
lever y. The throttle lever is spring
loaded. Engine speed returns to idle
when the lever is released. This ATV is
equipped with a throttle release switch,
which is designed to reduce the risk of a
frozen or stuck throttle.
29
FEATURES AND CONTROLS
BRAKE LEVER
WARNING
Operating the ATV with a spongy brake lever can result in loss of braking,
which could cause an accident. Never operate the ATV with a spongy-feeling
brake lever. Always contact your dealer for service before operating the
vehicle.
Squeeze the brake lever q toward the
handlebar to apply the front and rear
brakes. These brakes are hydraulically
activated disc type brakes that are
activated by only one lever.
Always test brake lever travel and
master cylinder fluid level before
riding. When squeezed, the lever
should feel firm. Any sponginess
would indicate a possible fluid leak or
low master cylinder fluid level, which
must be corrected before riding.
Contact your POLARIS dealer or other
qualified service facility for proper
diagnosis and repairs.
30
FEATURES AND CONTROLS
PARKING BRAKE
LOCKING THE PARKING BRAKE
WARNING
Operating the ATV while the parking brake is engaged could result in an
accident or fire. Always check to be sure the parking brake is disengaged
before operating.
1. Place the transmission in PARK.
2. Squeeze and release the brake
lever q two or three times, then
squeeze and hold.
3. Push the parking brake lock w
forward to engage the lock.
4. Release the brake lever.
5. To release the parking brake lock,
squeeze and release the brake
lever. It will return to its unlocked
position.
The parking brake may relax if left on for a long period of time. Always block the
wheels to prevent rolling. Always block the wheels on the downhill side of the
ATV if leaving it parked on a hill. Another option is to park the ATV in a sidehill
position. Never depend on the parking brake alone if the ATV is parked on a hill.
Always block the wheels to prevent rolling.
31
FEATURES AND CONTROLS
MASTER CYLINDER/BRAKE FLUID
WARNING
An over-full master cylinder may cause brake drag or brake lock-up, which
could result in an accident. Maintain brake fluid at the recommended level. Do
not overfill.
Never store or use a partial bottle of brake fluid. Brake fluid is hygroscopic,
meaning it rapidly absorbs moisture from the air. The moisture causes the
boiling temperature of the brake fluid to drop, which can lead to early brake
fade and the possibility of brake failure, which could result in an accident. After
opening a bottle of brake fluid, always discard any unused portion.
Check the brake fluid in the master cylinder before each ride.
1. Position the ATV on a level surface.
2. Position the handlebars so the
master cylinder q is level.
3. View the brake fluid level through
the indicator window w on the top
of the master cylinder. The eye will
appear dark when the fluid level is
full. When fluid is low, the eye will
be clear.
4. If the fluid level is low, remove the
cover screws and add fluid to the
fill line. Do not overfill. Use DOT 4
brake fluid only.
5. Reinstall the cover. Torque screws
to 7 in-lbs (.8 Nm).
32
FEATURES AND CONTROLS
AUXILIARY FOOT BRAKE
WARNING
Never back down a hill. Applying the auxiliary brake when backing down a hill
may cause rear tipover, which could result in serious injury or death.
Use caution when applying the auxiliary brake. Do not aggressively apply the
auxiliary brake when going forward. The rear wheels may skid and slide
sideways, causing loss of control and serious injury or death.
The auxiliary brake system is intended
to be used as a backup for the main
brake system. Should the main system
fail, use the auxiliary foot brake q.
The auxiliary foot brake is located on
the inside of the right footrest. Operate
this brake with your right foot.
If the rear wheels slide while using the
auxiliary brake, reduce brake pedal
pressure to brake the rear wheels
without skidding.
BRAKE FLUID LEVEL
Check the brake fluid level frequently for the auxiliary brake system. The
reservoir is located under the front storage box.
Maintain the fluid level between the maximum and minimum marks. Use DOT 4
brake fluid only.
33
FEATURES AND CONTROLS
AUTOMATIC TRANSMISSION GEAR SELECTOR
The transmission gear selector q is
located on the right side of the vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
To shift gears, brake to a complete
stop. When the engine is idling, move
the lever to the desired gear.
NOTE
Shifting gears with the engine speed above idle or while the vehicle is moving
could cause transmission damage.
Whenever the ATV is left unattended, always place the transmission in PARK
and lock the parking brake.
BELT LIFE
To extend belt life, use low forward gear when pulling a heavy load at less than
seven miles per hour for extended periods and when operating uphill at a slow
speed.
FUEL CAP
NOTICE
Never use fuel blends with more than 10% ethanol. Engine damage could
occur.
Always refuel with the engine stopped,
and outdoors or in a well ventilated
area. Refuel on a level surface.
Remove the fuel tank cap q and add
fuel. Use either leaded or unleaded
gasoline with a minimum pump octane
number of 87=(R+ M)/2 octane. Do not
use fuel with ethanol content greater
than 10%, such as E-85 fuel.
The fuel tank is designed to allow for
the normal expansion of fuel. Do not
overfill. Do not fill the tank neck.
34
FEATURES AND CONTROLS
FRONT COMPARTMENT
To gain access to the front
compartment, release the front rack
latches q and remove the rack. To
reinstall the rack, hold the rack as
shown in the illustration. Position the
front edge in the tabs, then push the
rack downward and secure the
latches.
Access the following components in the front compartment:
•
•
•
•
•
Radiator cap
Brake fluid reservoir
Battery
Coolant recovery bottle cap
Electrical/fuse/relay components
q Radiator Cap
r Battery
w Coolant Bottle Cap
t Brake Fluid Reservoir
e Electrical/Fuse/Relay
35
FEATURES AND CONTROLS
ELECTRONIC POWER STEERING (EPS)
Electronic power steering (EPS), if equipped, engages when the ignition key is
turned to the ON position. EPS remains engaged whether the vehicle is moving
or idle. See the Instrument Cluster section for EPS Warning Indicator
information.
ALL WHEEL DRIVE SYSTEM
The All Wheel Drive system is controlled by the 4X4 switch.
4X4 MODE
When the switch is on 4X4, the ATV is four-wheel drive, and the 4X4 indicator
icon in the instrument cluster display will be visible.
When in 4X4, the demand drive unit will automatically engage any time the rear
wheels lose traction. When the rear wheels regain traction, the demand drive
unit will automatically disengage.
There is no limit to the length of time the vehicle may remain in 4X4. The vehicle
automatically engages 4X4 when operating in reverse if the switch is set to
either 4X4 position.
2X4 MODE
When the switch is on 2X4, the ATV is in two-wheel drive at all times.
ENGAGING 4X4
The 4X4 switch may be turned on or off while the vehicle is moving. Initially, the
vehicle's electronic system will not enable 4X4 until the engine RPM is below
3000. Once enabled, 4X4 remains enabled until the 4X4 switch is turned off. If
the switch is turned off while the demand drive unit is moving, it will not
disengage until the rear wheels regain traction.
Engage the 4X4 switch before getting into conditions where front wheel drive
may be needed. If the rear wheels are spinning, release the throttle before
switching to 4X4.
NOTICE
Switching to 4X4 or ADC 4X4 while the rear wheels are spinning may cause
severe drive shaft and gearcase damage. Always switch to 4X4 or ADC 4X4
while the rear wheels have traction or are at rest.
36
FEATURES AND CONTROLS
INSTRUMENT CLUSTER
OVERVIEW
NOTICE
The use of a high pressure washer may damage the instrument cluster. Wash
the vehicle by hand or with a garden hose using mild soap. Do not use alcohol
to clean the instrument cluster. Do not allow insect sprays to contact the lens.
Immediately clean off any gasoline that splashes on the instrument cluster.
q Gear Indicator
H = High Gear
L = Low Gear
N = Neutral
R = Reverse Gear
P = Park
– = Gear Signal Error (or shifter between gears)
w Display Area 2
This area displays odometer, trip meter, trip meter 2, voltage, engine
temperature, engine hour meter, programmable service hour interval,
ground speed, or engine RPM.
e Display Area 1
This area displays engine RPM, ground speed, or coolant temperature.
r Fuel Gauge
The segments of the fuel gauge show the level of fuel in the fuel tank.
When the last segment clears, a low fuel warning is activated. All
segments including the fuel icon will flash. Refuel immediately.
t Service Indicator
A flashing wrench symbol alerts the operator that the preset service
interval has been reached. Your POLARIS dealer can provide scheduled
maintenance. See page 48 for more information.
y Clock
The clock displays time in a 12-hour or 24-hour format.
u AWD Indicator
Segments of the indicator illuminate based on drive mode engaged.
37
FEATURES AND CONTROLS
INDICATOR LAMPS
q Check Engine
w EPS Warning (if
equipped)
This indicator appears if an EFI-related fault occurs. Do not
operate the vehicle if this warning appears. Serious engine
damage could result. Your authorized POLARIS dealer can
assist.
This indicator illuminates when a fault has occurred in the
EPS system. Your authorized POLARIS dealer can assist.
EPS operation is possible with key on/engine off for up to 5
minutes.
e Engine Hot
This lamp illuminates to indicate an overheated engine. If the
indicator flashes, a severe overheating condition exists.
r Neutral
This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
t Helmet/Seat Belt
This lamp flashes for several seconds when the key is turned
to the ON position. The lamp is a reminder to wear helmet and
seat belt (if equipped) before operating.
y High Beam
This lamp illuminates when the headlamp switch is set to high
beam.
u Chassis Fault
If applicable.
i Performance
On models equipped with a low speed limiter, indicator light
will remain on when low speed limiter is active.
Limited
38
FEATURES AND CONTROLS
DIGITAL GAUGE
The instrument cluster displays critical vehicle information to the user.
NOTE
Some features are not applicable to all models. The use of a high pressure
washer may damage the instrument cluster. Wash the vehicle by hand or with
a garden hose using mild soap. Certain products, including insect repellents
and chemicals, will damage the instrument cluster lens. Do not use alcohol to
clean the instrument cluster. Do not allow insect sprays to contact the lens.
Immediately clean off any gasoline that splashes on the instrument cluster.
1. Gear Display - This area displays gear shifter position:
H: High Gear
L: Low Gear
N: Neutral
R: Reverse Gear
P: Park
–: Gear Signal Error (or shifter between gears)
2. Display Area 2 -This area displays odometer, trip meter, trip meter 2,
voltage, engine temperature, engine hour meter, programmable service hour
interval, ground speed, or engine RPM.
3. Display Area 1 - This area displays engine RPM, ground speed, or coolant
temperature.
4. Fuel Gauge -The segments of the fuel gauge show the level of fuel in the
fuel tank. When the last segment clears, a low fuel warning is activated. All
segments including the fuel icon will flash. Refuel immediately.
5. Service Indicator - A flashing wrench symbol alerts the operator that the
preset service interval has been reached. Your POLARIS dealer can provide
scheduled maintenance. See the Periodic Maintenance Chart section for
more information.
6. Clock - The clock displays time in a 12-hour or 24-hour format.
7. AWD Indicator- Segments of the indicator illuminate based on drive mode
engaged.
39
FEATURES AND CONTROLS
DISPLAY AREA 1
Pressing the MODE button will change the information displayed in Area 1 q.
40
Speed
Engine
Temperature
RPM
Ambient
Temperature
(Optional)
FEATURES AND CONTROLS
DISPLAY AREA 2
Toggle the Up/Down buttons to change the information displayed in Area 2 w.
Odometer
Engine
Temperature
Trip 1
Ambient
Temperature
(Optional)
Trip 2
RPM
Voltage
Speed
Engine Hours
Service Hours
41
FEATURES AND CONTROLS
OPTIONS MENU
Press and hold the MODE button to enter the Options Menu.
OPTIONS MENU
NOTES
Diagnostic Codes
Only displays if fault codes are
present or stored
Units - Distance
Select MPH or KPH
Units - Temp
Select between °F and °C
Clock
Select between 12H or 24H, and set
time
Backlight Color
Select between Blue or Red
Backlight Level
Set backlight brightness level
Service Hours
View/Set Service hours
Exit Menu
Exit
42
FEATURES AND CONTROLS
UNIT SELECTION DISTANCE
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Units-Distance” from the Options Menu by pressing the MODE
button.
Reference the image shown above:
q Press the MODE button.
w Toggle the Up/Down Buttons to change the units (MPH or KPH)
e With the correct unit displayed, Press the mode button which will set
the unit and return to the Options Menu.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
43
FEATURES AND CONTROLS
UNIT SELECTION TEMPERATURE
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Units - Temp” from the Options Menu by pressing the MODE button.
Reference the image shown above:
q Press the MODE button.
w Toggle the Up/Down Buttons to change the units (°F or °C)
e With the correct unit displayed, Press the mode button which will set
the unit and return to the Options Menu.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
44
FEATURES AND CONTROLS
CLOCK
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Clock” from the Options Menu by pressing the MODE button.
Reference the image shown above:
q Press the MODE button.
w Toggle the Up/Down Buttons to change the units (12H or 24H)
e With the correct unit displayed, Press the mode button which will set the
unit.
r Toggle the Up/Down Buttons to change the units (Cycles Hours)
t With the correct unit displayed, Press the mode button which will set the
unit.
y Toggle the Up/Down Buttons to change the units (Cycles 10s of Minutes)
u With the correct unit displayed, Press the mode button which will set the
unit.
i Toggle the Up/Down Buttons to change the units (Cycles 1s of Minutes)
i Toggle the Up/Down Buttons to change the units (Cycles 1s of Minutes)
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
45
FEATURES AND CONTROLS
BACK LIGHT COLOR
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Backlight Color” from the Options Menu by pressing the MODE
button.
Reference the image shown above:
q Press the MODE button.
w Toggle the Up/Down Buttons to change the units (Blue or Red)
e With the correct unit displayed, Press the mode button which will set
the unit and return to the Options Menu.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
46
FEATURES AND CONTROLS
BACK LIGHT LEVEL
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Backlight Level” from the Options Menu by pressing the MODE
button.
Reference the image shown above:
q Press the MODE button.
w Toggle the Up/Down Buttons to change the units (Increase or De­
crease Level)
e With the correct unit displayed, Press the mode button which will set
the unit and return to the Options Menu.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
47
FEATURES AND CONTROLS
SERVICE HOURS
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Service Hours” from the Options Menu by pressing the MODE button.
Reference the image shown above:
q Press the MODE button.
w Toggle the Up/Down Buttons to change the units (0, 5, 10 - 95, 100)
e With the correct unit displayed, press the MODE button, which will set
the unit and return you to the Options Menu.
NOTICE
To reset service hours after they have counted down to "0.0", reselect the
existing setpoint or select a new service hour value.
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
48
FEATURES AND CONTROLS
DIAGNOSTIC CODE
NOTICE
Diagnostic Code Screen will show available MIL that has come on during that
ignition cycle.
1. Press and hold the MODE button to enter the Options Menu.
NOTICE
“OPTIONS” will display on the screen for 3 seconds before showing first menu
item.
2. Select “Diagnostic Codes” from the Options Menu by pressing the MODE
button.
Toggle the Up/Down Buttons to cycle through Code(s).
NOTICE
This option will only be available if a fault code was set or is active during the
current ignition key 'on' cycle. Turning off the ignition will clear any save fault
codes from the gauge.
Reference the image shown above:
q Area A will Display FMI (XX)
w Area B will Display SPN (XXXXXX)
e Clock Area will Display Count (XXX)
3. To exit the Options Menu the user can select Exit Menu function from
Options Menu, can hold Mode Button and exit out of Options Menu, or not
press any button for 10 seconds, which will exit out of the Options Menu.
49
FEATURES AND CONTROLS
DIAGNOSTIC DISPLAY CODE DEFINITIONS
Open Load:There is a break in the wires that lead to the item listed in the chart
(injector, fuel pump, etc.), or the item has failed.
Short-to-Ground:The wire is shorted to ground between the electronic control
unit and the item listed in the chart.
Shorted Load:The wires leading to the item listed in the chart are shorted
together, or the item has shorted internally.
Short-to-Battery:The wire leading from the item listed in the chart to the
electronic control unit is shorted to a wire at battery voltage.
DIAGNOSTIC CODES
COMPONENT
Throttle Position
Sensor
Engine Temperature
Sensor
Intake Air
Temperature Sensor
Manifold Absolute
Pressure Sensor
Crankshaft Position
Sensor
Vehicle Speed Signal
Gear Sensor Signal
50
CONDITION
SPN
FMI
Voltage Too High
51
3
Voltage Too Low
51
4
Voltage Too High
110
3
Voltage Too Low
110
4
Temperature Too High
110
16
Engine Overheat
Shutdown
110
0
Voltage Too High
105
3
Voltage Too Low
105
4
Voltage Too High
102
3
Voltage Too Low
102
4
Signal Out of Range
102
2
Circuit Fault
636
8
Plausibility Fault
636
2
Speed Too High
84
8
Plausibility Fault
84
2
Voltage Too Low
523
4
Voltage Too Low
523
3
Signal Fault
523
2
FEATURES AND CONTROLS
DIAGNOSTIC CODES
COMPONENT
SPN
FMI
Driver Circuit Open/
Grounded
651
5
Driver Circuit Short to
B+
651
3
Driver Circuit
Grounded
651
4
Driver Circuit Open/
Grounded
652
5
Driver Circuit Short to
B+
652
3
Driver Circuit
Grounded
652
4
Ignition Coil Primary
Driver 1 (MAG)
Driver Circuit Short to
B+
1268
3
Ignition Coil Primary
Driver 2 (PTO)
Driver Circuit Short to
B+
1269
3
Fuel Pump Driver
Circuit
Driver Circuit Open/
Grounded
1347
5
Driver Circuit Short to
B+
1347
3
Driver Circuit
Grounded
1347
4
Driver Circuit Open/
Grounded
1071
5
Driver Circuit Short to
B+
1071
3
Driver Circuit
Grounded
1071
4
Driver Circuit Open/
Grounded
634
5
Driver Circuit Short to
B+
634
3
Driver Circuit
Grounded
634
4
Position Out of Range
634
7
Driver Circuit Open/
Grounded
1321
5
Injector 1 (MAG) (SDI
Part Load)
Injector 2 (PTO) (SDI
Part Load)
Fan Relay Driver
Circuit
Idle Air Control
Starter Enable Circuit
CONDITION
51
FEATURES AND CONTROLS
DIAGNOSTIC CODES
COMPONENT
Chassis Relay
All Wheel Drive
Control
System Power
Throttle Safety Signal
Active Descent
Control System
Idle Speed
52
CONDITION
SPN
FMI
Driver Circuit Short to
B+
1321
3
Driver Circuit
Grounded
1321
4
Driver Circuit Open/
Grounded
520208
5
Driver Circuit Short to
B+
520208
3
Driver Circuit
Grounded
520208
4
Driver Circuit Open/
Grounded
520207
5
Driver Circuit Short to
B+
520207
3
Driver Circuit
Grounded
520207
4
Voltage Too High
168
3
Voltage Too Low
168
4
Voltage Too High
520194
3
Voltage Too Low
520194
4
Signal Out of Range
520194
2
Throttle Stuck
520194
7
Driver Circuit Open/
Grounded
520203
5
Driver Circuit Short to
B+
520203
3
Driver Circuit
Grounded
520203
4
Speed Too High
520211
3
Speed Too Low
520211
4
FEATURES AND CONTROLS
DIAGNOSTIC CODES
COMPONENT
CONDITION
SPN
FMI
EPS MODELS ONLY
Vehicle Speed Sensor
Data Valid But Above
Normal Operational
Range - Most Severe
Level
84
0
Data Erratic,
Intermittent Or
Incorrect
84
2
Abnormal Rate Of
Change
84
10
Received Network
Data In Error
84
19
Data Valid But Above
Normal Operational
Range - Most Severe
Level
168
0
Voltage Above
Normal, Or Shorted To
High Source
168
3
Voltage Below
Normal, Or Shorted To
Low Source
168
4
Data Valid But Above
Normal Operational
Range - Most Severe
Level
190
0
Data Erratic,
Intermittent Or
Incorrect
190
2
Received Network
Data In Error
190
19
Bad Intelligent Device
Or Component
628
12
Out Of Calibration
628
13
Calibration
Out Of Calibration
630
13
Steering Over Current
Shut Down
Current Above Normal
Or Grounded Circuit
520221
6
Steering Excessive
Current Error
Current Above Normal
Or Grounded Circuit
520222
6
System Power
Engine Speed
ECU Memory
53
FEATURES AND CONTROLS
DIAGNOSTIC CODES
COMPONENT
CONDITION
SPN
FMI
EPS MODELS ONLY
Steering Torque
Partial Failure
Condition Exists
Steering Torque Full
Failure
Condition Exists
EPAS Inverter
Temperature
EPAS
Communications
Receive Data Error
Position Encoder
Error
EPAS Software Error
520223
31
520224
31
Data Valid But Above
Normal Operational
Range - Most Severe
Level
520225
0
Data Valid But Above
Normal Operating
Range - Moderately
Severe Level
520225
16
Data Erratic,
Intermittent Or
Incorrect
520226
2
Condition Exists
520226
31
Root Cause Not
Known
520228
11
Bad Intelligent Device
Or Component
520228
12
Condition Exists
520228
31
Bad Intelligent Device
Or Component
520229
12
Condition Exists
520229
31
520231
31
EPAS Power Save
Condition
Condition Exists
EPS SEPIC Voltage
Error
Voltage Above
Normal, Or Shorted To
High Source
524086
3
Voltage Below
Normal, Or Shorted To
Low Source
524086
4
54
OPERATION
OPERATION
WARNING
Failure to operate the vehicle properly can result in a collision, loss of control,
accident or rollover, which may result in serious injury or death. Read and
understand all safety warnings outlined in the safety section of this owner’s
manual.
VEHICLE BREAK-IN PERIOD
The break-in period for your new POLARIS vehicle is the first 25 hours of
operation, or the time it takes to use the first two tanks full of gasoline. No single
action on your part is as important as a proper break-in period. Careful treatment
of a new engine and drive components will result in more efficient performance
and longer life for these components. Perform the following procedures
carefully.
NOTICE
Excessive heat build-up during the first three hours of operation will damage
close-fitted engine parts and drive components. Do not operate at full throttle
or high speeds during the first three hours of use.
Use of any improper oils may cause serious engine damage. POLARIS PS-4
Full Synthetic 5W-50 4-Cycle Oil is specifically formulated for your 4-cycle
engine.
55
OPERATION
ENGINE AND DRIVETRAIN BREAK-IN
1. Fill the fuel tank with gasoline. See the Fuel Tank section for details. Always
exercise extreme caution whenever handling gasoline.
2. Check the oil level. See the Oil Check section for reference. Add the
recommended oil as needed to maintain the oil level in the safe operating
range.
3. Drive slowly at first. Select an open area that allows room to familiarize
yourself with vehicle operation and handling.
4. Avoid aggressive use of the brakes.
5. Vary throttle positions. Do not operate at sustained idle.
6. Pull only light loads.
7. Perform regular checks on fluid levels, controls and areas outlined on the
daily pre-ride inspection checklist.
8. During the break-in period, change both the oil and the filter at 25 hours or
one month.
9. Check fluid levels of transmission and all gearcases after the first 25 hours of
operation and every 100 hours thereafter.
BRAKE SYSTEM BREAK-IN
Apply only moderate braking force for the first 50 stops. Aggressive or overly
forceful braking when the brake system is new could damage brake pads and
rotors.
PVT BREAK-IN (CLUTCHES/BELT)
A proper break-in of the clutches and drive belt will ensure a longer life and
better performance. Break in the clutches and belt by operating at slower
speeds during the break-in period as recommended. Pull only light loads. Avoid
aggressive acceleration and high speed operation during the break-in period.
If a belt fails, always clean any debris from the PVT intake and outlet duct and
from the clutch and engine compartments when replacing the belt.
56
OPERATION
PRE-RIDE CHECKLIST
Failure to inspect and verify that the ATV is in safe operating condition before
operating increases the risk of an accident. Always inspect the ATV before each
use to make sure it's in safe operating condition.
ITEM
REMARKS
PAGE
Brake system/lever travel
Ensure proper operation
page 30
page 97
Brake fluid
Ensure proper level
page 33
Auxiliary brake
Ensure proper operation
page 33
Front suspension
Inspect, lubricate if necessary
-
Rear suspension
Inspect, lubricate if necessary
-
Steering
Ensure free operation
-
Tires
Inspect condition and pressure
Wheels/fasteners
Inspect, ensure fastener
tightness
-
Frame nuts, bolts, fasteners
Inspect, ensure tightness
-
Fuel and oil
Ensure proper levels
page 123
Coolant level
Ensure proper level
page 96
Coolant hoses
Inspect for leaks
Throttle
Ensure proper operation
page 29
Indicator lights/switches
Ensure operation
page 38
Engine stop switch
Ensure proper operation
page 28
Air filter, pre-filter
Inspect, clean
page 102
Headlamp
Check operation
page 27
Brake light/taillight
Check operation
-
Riding gear
Wear approved helmet,
goggles, and protective
clothing
page 11
Winch (if equipped)
Inspect cable and switch
page 73
page 98
-
57
OPERATION
SAFE OPERATION PRACTICES
1. Visit the Recreational Off-Highway Vehicle Association web site and take the
free on-line training course. Complete the recommended safety training
before operating this vehicle. Visit www.rohva.org or call 866-267-2751.
2. Do not allow anyone under 16 years of age or without a valid driver’s license
to operate this vehicle.
3. Never carry a passenger on this vehicle.
4. Engine exhaust fumes are poisonous. Never start the engine or let it run in
an enclosed area.
5. Never operate with accessories not approved by POLARIS for use on this
vehicle.
6. Operate this vehicle off-road only. Never operate this vehicle on any public
street, road or highway, including dirt and gravel roads (unless designated for
off-highway use).
7. Use caution and drive at reduced speeds in conditions of reduced visibility
such as fog, rain and darkness. Clean headlights frequently and replace
burned out headlamps promptly.
8. Always operate at a speed that's appropriate for the terrain, the visibility and
operating conditions and your skills and experience. Never operate at
excessive speeds. Never attempt wheelies, jumps, or other stunts. Keep
both hands on the steering wheel or handlebars during operation.
9. Never consume alcohol or drugs before or while operating this vehicle.
10. Always use the size and type of tires specified for your vehicle. Always
maintain proper tire pressure.
11. Never operate a damaged vehicle. After any rollover or accident, have a
qualified service dealer inspect the entire machine for possible damage.
12. Never operate the vehicle on a frozen body of water unless you have first
verified that the ice is sufficiently thick to support the weight and moving force
of the vehicle, you and your cargo, together with any other vehicles in your
party.
13. Do not touch hot exhaust system components. Always keep combustible
materials away from the exhaust system.
14. Always remove the ignition key when the vehicle is not in use to prevent
unauthorized use.
58
OPERATION
TRAIL ETIQUETTE
Always practice good etiquette when riding. Allow a safe distance between your
vehicle and other vehicles operating in the same area. Communicate to
oncoming operators by signaling the number of vehicles in your group. When
stopping, move your vehicle to the edge of the trail as far as possible to allow
others to pass safely.
KNOW YOUR RIDING AREA/TREAD LIGHTLY
Familiarize yourself with all laws and regulations concerning the operation of this
vehicle in your area. Respect the environment in which you ride your vehicle.
Find out where the designated riding areas are by contacting your POLARIS
dealer, a local riding club, or local officials.
Help keep our trails open for recreational vehicle use. As an off-road enthusiast,
you represent the sport and can set a good example (or a poor example) for
others to follow. Tread lightly. Operate with respect for the terrain, avoid littering,
and always stay on the designated trails.
STARTING THE ENGINE
1. Position the vehicle on a level surface outdoors or in a well- ventilated area.
2. Place the transmission in PARK.
3. Lock the parking brake.
TIP
The starter interlock will prevent the engine from starting if the transmission is
in gear and the brake is not engaged.
4. Sit on the vehicle and move the engine stop switch to RUN.
TIP
Do not press the throttle while starting the engine.
5. Turn the ignition key past the ON position to engage the starter. Activate the
starter for a maximum of five seconds, releasing the key when the engine
starts.
6. If the engine does not start, return the key to the OFF position and wait five
seconds before attempting to start again. Activate the starter for another five
seconds if necessary. Repeat this procedure until the engine starts.
NOTICE
Operating the vehicle immediately after starting could cause engine damage.
Allow the engine to warm up for several minutes before operating the vehicle.
59
OPERATION
COLD WEATHER OPERATION
If the vehicle is used year-round, check the oil level frequently. A rising oil level
could indicate the accumulation of contaminates such as water or excess fuel in
the bottom of the crankcase. Water in the bottom of the crankcase can lead to
engine damage and must be drained. Water accumulation increases as outside
temperature decreases.
NEW OPERATOR DRIVING PROCEDURES
1. Wear protective riding gear. See the Safe Riding Gear section.
2. Perform the pre-ride inspection.
3. Place the transmission in PARK.
4. Lock the parking brake.
5. Mount the vehicle from the left side.
6. Sit upright with both feet on the footrests and both hands on the handlebars.
7. Start the engine and allow it to warm up.
8. Shift the transmission into gear.
9. Check your surroundings and determine your path of travel.
10. Release the parking brake.
11. Slowly depress the throttle with your right thumb and begin driving.
12. Drive slowly. Practice maneuvering and using the throttle and brakes on level
surfaces.
60
OPERATION
TURNING THE VEHICLE
Both rear wheels drive equally at all times. This means that the outside wheel
must travel a greater distance than the inside wheel when turning, and the inside
tire must slip traction slightly.
1. Slow down.
2. Never turn quickly when carrying cargo.
3. Steer in the direction of the turn.
4. Keep both feet on the footrests.
5. Lean your upper body to the inside of the turn while supporting your weight
on the outer footrest. This technique alters the balance of traction between
the rear wheels, allowing the turn to be made smoothly. The same leaning
technique should be used for turning in reverse.
6. Practice making turns at slow speeds before attempting to turn at faster
speeds
WARNING
Turning improperly can result in vehicle overturn. Never turn abruptly or at
sharp angles. Never turn at high speeds.
DRIVING ON SLIPPERY SURFACES
Whenever riding on slippery surfaces such as wet trails or loose gravel, or
during freezing weather, follow these precautions:
1. Do not operate on excessively rough, slippery or loose terrain.
2. Slow down when entering slippery areas.
3. Engage 4X4 before wheels begin to lose traction.
NOTICE
Severe damage to drive train may occur if the 4X4 is engaged while the wheels
are spinning. Allow the rear wheels to stop spinning before engaging 4X4, or
engage 4X4 before wheels begin to lose traction.
4. Maintain a high level of alertness, reading the trail and avoiding quick, sharp
turns, which can cause skids.
5. Never apply the brakes during a skid. Correct a skid by turning the
handlebars in the direction of the skid and shifting your body weight forward.
61
OPERATION
DRIVING UPHILL
Braking and handling are greatly
affected when operating in hilly terrain.
Improper procedure could cause loss of
control or overturn. Whenever traveling
uphill, follow these precautions:
1. Always move the 4X4 switch to ADC 4X4 before ascending or descending a
hill.
2. Drive straight uphill.
3. Avoid steep hills. Maximum incline is 25°
4. Always check the terrain carefully before ascending any hill.
5. Never climb hills with excessively slippery or loose surfaces.
6. Keep both feet on the footrests.
7. Shift body weight uphill.
8. Proceed at a steady rate of speed and throttle opening. Opening the throttle
suddenly could cause the ATV to flip over backwards.
9. Never go over the top of any hill at high speed. An obstacle, a sharp drop, or
another vehicle or person could be on the other side of the hill.
10. Remain alert and be prepared to take emergency action. This may include
quick dismounting of the vehicle.
62
OPERATION
DRIVING DOWNHILL
When driving downhill, follow these precautions:
1. Always check the terrain carefully before descending a hill.
2. Always move the 4X4 switch to ADC 4X4 before ascending or descending a
hill.
3. Avoid steep hills. Maximum incline is 25°
4. Always descend a hill with the transmission in forward gear. Do not descend
a hill with the transmission in neutral.
5. Slow down. Never travel down a hill at high speed.
6. Drive straight downhill. Avoid traveling down a hill at an angle, which would
cause the vehicle to lean sharply to one side.
7. Shift body weight uphill.
8. Apply the brakes slightly to aid in slowing. Applying the brakes too firmly may
cause the rear wheels to lock, which could result in loss of control.
63
OPERATION
DRIVING ON A SIDEHILL (SIDEHILLING)
Driving on a sidehill is not
recommended. Improper procedure
could cause loss of control or overturn.
Avoid crossing the side of any hill
unless absolutely necessary.
If crossing a sidehill is unavoidable, follow these precautions:
1. Slow down.
2. Avoid crossing the side of a steep hill.
3. Lean into the hill, transferring your upper body weight toward the hill while
keeping your feet on the footrests.
4. If the vehicle begins to tip, quickly turn the front wheel downhill, if possible, or
dismount on the uphill side immediately!
TURNING AROUND ON A HILL (K-TURN)
If the vehicle stalls while climbing a hill, never back it down the hill! Use the Kturn to turn around.
1. Stop and lock the parking brake while keeping body weight uphill.
2. Always move the 4X4 switch to ADC 4X4 before ascending or descending a
hill. See the Switch Location section for details.
3. Leave the transmission in forward and shut off the engine.
4. Dismount on the uphill side of the vehicle, or on the left if the vehicle is
pointing straight uphill.
5. Staying uphill of the vehicle, turn the handlebars full left.
6. While holding the brake lever, release the parking brake lock and slowly
allow the vehicle to roll around to your right until it's pointing across the hill or
slightly downward.
7. Lock the parking brake. Remount the vehicle from the uphill side, keeping
body weight uphill. Start the engine with the transmission still in forward.
8. Release the parking brake and proceed slowly, controlling speed with the
brake lever, until the vehicle is on more level ground.
64
OPERATION
DRIVING THROUGH WATER
Your ATV can operate through water with a maximum recommended depth
equal to the bottom of the footrests. Follow these procedures when operating
through water:
1. Determine water depths and current before entering water.
2. Choose a crossing where both banks have gradual inclines.
3. Avoid operating through deep or fast-flowing water.
NOTICE
Major engine damage can result if the vehicle is not thoroughly inspected
after operation in water. Perform the services outlined in the Periodic
Maintenance Chart. The following areas need special attention: engine oil,
transmission oil, demand drive fluid and all grease fittings.
If the vehicle tips or overturns in water, or if the engine stops during or after
operating in water, service is required before starting the engine. Your
POLARIS dealer can provide this service. If it's impossible to bring the vehicle
in before starting the engine, perform the service outlined in the Vehicle
Immersion section of this manual, and take the vehicle in for service at the
first opportunity.
65
OPERATION
4. After leaving water, test the brakes. Apply them lightly several times while
driving slowly. The friction will help dry out the pads.
If it’s unavoidable to enter water deeper than the footrest level:
• Proceed slowly. Avoid rocks and obstacles.
• Balance your weight carefully. Avoid sudden movements.
• Maintain a steady rate of speed. Do not make sudden turns or stops. Do not
make sudden throttle changes.
DRIVING OVER OBSTACLES
Follow these precautions when operating over obstacles:
1. Always check for obstacles before operating in a new area.
2. Look ahead and learn to read the terrain. Be constantly alert for hazards
such as logs, rocks and low hanging branches.
3. Travel slowly and use extra caution when operating on unfamiliar terrain. Not
all obstacles are immediately visible.
4. Never attempt to operate over large obstacles, such as rocks or fallen trees.
5. Always have a passenger dismount before operating over an obstacle that
could cause a fall from the vehicle or vehicle tipover.
66
OPERATION
DRIVING IN REVERSE
Follow these precautions when operating in reverse:
1. Always check for obstacles or people behind the vehicle.
2. Always avoid backing downhill.
3. Back slowly.
4. Apply the brakes lightly for stopping.
5. Avoid turning at sharp angles.
6. Never open the throttle suddenly.
7. Do not use the override switch unless additional wheel speed is required for
vehicle movement. Use the override with caution as rearward vehicle speed
is greatly increased. Do not operate at wide open throttle. Operate the
throttle just enough to maintain a desired speed.
NOTICE
Excessive throttle operation while in the speed limit mode may cause fuel to
build in the exhaust, resulting in engine popping and/or engine damage.
67
OPERATION
PARKING ON AN INCLINE
Avoid parking on an incline if possible. If it's unavoidable, follow these
precautions:
1. Stop the engine.
2. Place the transmission in PARK.
3. Lock the parking brake.
4. Always block the rear wheels on the downhill side.
STOPPING THE ENGINE
1. Release the throttle pedal completely and brake to a complete stop.
2. Place the transmission in PARK.
3. Turn the engine off.
4. Slowly release the brake pedal and make sure the transmission is in PARK
before exiting the vehicle.
WARNING
A rolling vehicle can cause serious injury. Always place the transmission in
PARK when stopping the engine.
68
OPERATION
PARKING THE VEHICLE
1. Stop the vehicle on a level surface. When parking inside a garage or other
structure, be sure that the structure is well ventilated and that the vehicle is
not close to any source of flame or sparks, including any appliance with pilot
lights.
2. Place the transmission in PARK.
3. Turn the engine off.
4. Engage the parking brake (if equipped).
5. Slowly release the brake pedal and make sure the transmission is in PARK
before exiting the vehicle.
6. Remove the ignition key to prevent unauthorized use.
69
OPERATION
CARGO WARNING
WARNING
Overloading the vehicle or carrying or towing cargo improperly can alter
vehicle handling and may cause loss of control or brake instability, which can
result in serious injury or death. Always follow these precautions when hauling
cargo:
REDUCE SPEED AND ALLOW GREATER DISTANCES FOR BRAKING
WHEN HAULING CARGO.
NEVER EXCEED THE MAXIMUM WEIGHT CAPACITY of the vehicle. When
determining the weight you are adding to the vehicle, include the weight of the
operator, accessories, loads in the rack or box and the load on the trailer
tongue. The combined weight of these items must not exceed the maximum
weight capacity.
CARGO WEIGHT DISTRIBUTION should be 1/3 on the front rack and 2/3 on
the rear rack. When operating over rough or hilly terrain, reduce speed and
cargo to maintain stable driving conditions. Carrying loads on only one rack
increases the possibility of vehicle overturn.
CARRY LOADS AS LOW ON THE RACKS AS POSSIBLE. Carrying loads
high on the racks raises the center of gravity of the vehicle and creates a less
stable operating condition.
SECURE ALL LOADS BEFORE OPERATING. Unsecured loads can create
unstable operating conditions, which could result in loss of control of the
vehicle.
OPERATE ONLY WITH STABLE AND SAFELY ARRANGED LOADS. When
handling off-centered loads that cannot be centered, securely fasten the load
and operate with extra caution. Always attach the tow load to the hitch point
designated for your vehicle.
HEAVY LOADS CAN CAUSE BRAKING AND CONTROL PROBLEMS. Use
extreme caution when applying brakes with a loaded vehicle. Avoid terrain or
situations that may require backing downhill.
USE EXTREME CAUTION when operating with loads that extend over the
rack sides. Stability and maneuverability may be adversely affected, causing
the vehicle to overturn.
DO NOT BLOCK THE FRONT HEADLIGHT BEAM when carrying loads on the
front rack.
DO NOT TRAVEL FASTER THAN THE RECOMMENDED SPEEDS.
The vehicle should never exceed 10 mph (16 kph) while towing a load on a
level surface. Vehicle speed should never exceed 5 mph (8 kph) when towing
loads in rough terrain, while cornering, or while ascending or descending a hill.
70
OPERATION
HAULING CARGO
When hauling cargo, adhere to the following:
1. Never exceed the weight capacities specified for your ATV on warning labels
and in the specifications section of this manual
2. Cargo weight should be evenly distributed (1/3 on the front rack and 2/3 on
the rear rack) and mounted as low as possible.
3. When operating over rough or hilly terrain, reduce speed and cargo weight to
maintain stable driving conditions.
4. Do not obstruct the headlight beam with cargo.
5. Slow down.
6. Use low forward gear when hauling or towing heavy cargo to extend belt life.
7. Always operate the vehicle with extreme caution whenever hauling or towing
loads. Balance, handling and control may be affected.
TOWING LOADS
Always attach a towed load to the hitch point. Remove the hitch from the ATV
when not towing a trailer. If towing a load, reduce rear rack cargo weight by the
amount of tongue weight.
• The combination of rear rack cargo weight and tongue weight must not
exceed the rear rack capacity.
• The total load (operator, accessories, cargo and weight on hitch) must not
exceed the maximum weight capacity of the vehicle.
NOTICE
Using an improper hitch or exceeding the maximum tongue weight capacity
can result in serious damage to the vehicle and will void your ATV warranty.
Never install a hitch longer than 4" (10 cm). Never install automotive
accessories on your POLARIS ATV. Always install POLARIS-approved (or
equivalent) accessories designed for ATV use.
MAXIMUM TOWING CAPACITIES
Do not exceed maximum towing capacities. Avoid towing on inclines.
Maximum Towed Load (Level
Ground)
Maximum Vertical Hitch Weight
1500 lbs. (680 kg)
150 lbs. (68 kg)
71
72
WINCH GUIDE
WINCH GUIDE
These safety warnings and instructions apply if your vehicle came equipped with
a winch or if you choose to add an accessory winch to your vehicle.
WARNING
Improper winch use can result in SEVERE INJURY or DEATH. Always follow
all winch instructions and warnings in this manual.
Your winch may have a cable made of either wire rope or specially designed
synthetic rope. The term “winch cable” will be used for either unless noted
otherwise.
WINCH SAFETY PRECAUTIONS
1. Read all sections of this manual.
2. Never use alcohol or drugs before or while operating the winch.
3. Never allow children under 16 years of age to operate the winch.
4. Always wear eye protection and heavy gloves when operating the winch.
5. Always keep body, hair, clothing and jewelry clear of the winch cable, fairlead
and hook when operating winch.
6. Never attempt to “jerk” a load attached to the winch with a moving vehicle.
See the Shock Loading section on page 81.
7. Always keep the area around the vehicle, winch, winch cable, and load clear
of people (especially children) and distractions while operating the winch.
8. Always turn the vehicle ignition power OFF when it and the winch are not
being used.
9. Always be sure that at least five (5) full turns of winch cable are wrapped
around the winch drum at all times. The friction provided by this wrapped
cable allows the drum to pull on the winch cable and move the load.
10. Always apply your vehicle’s park brake and/or park mechanism to hold the
vehicle in place during winching. Use wheel chocks if needed.
11. Always align the vehicle and winch with the load directly in front of the
vehicle as much as possible. Avoid winching with the winch cable at an angle
to the winching vehicle’s centerline whenever possible.
12. If winching at an angle is unavoidable, follow these precautions:
a. Look at the winch drum occasionally. Never let the winch cable “stack” or
accumulate at one end of the winch drum. Too much winch cable at one
end of the winch drum can damage the winch and the winch cable.
73
WINCH GUIDE
b. If stacking occurs, stop winching. Follow step 15 of Winch Operation to
feed and rewind the cable evenly before continuing the winch operation.
13. Never winch up or down at sharp angles. This can destabilize the winching
vehicle and possibly cause it to move without warning.
14. Never attempt to winch loads that weigh more than the winch’s rated
capacity.
15. The winch motor may become hot during winch use. If you winch for more
than 45 seconds, or if the winch stalls during operation, stop winching and
permit the winch to cool down for 10 minutes before using it again.
16. Never touch, push, pull or straddle the winch cable while winching a load.
17. Never let the winch cable run through your hands, even if wearing heavy
gloves.
18. Never release the clutch on the winch when the winch cable is under load.
19. Never use the winch for lifting or transporting people.
20. Never use the winch to hoist or suspend a vertical load.
21. Never immerse or submerse your winch in water. Your dealer can provide
service on your winch if this occurs.
22. Always inspect your winch and winch cable before each use.
23. Never winch the hook fully into the winch. This can cause damage to winch
components.
24. Unplug the remote control from the vehicle when the winch is not in use to
prevent inadvertent activation and use by unauthorized persons.
25. Never grease or oil the winch cable. This will cause the winch cable to collect
debris that will shorten the life of the cable.
74
WINCH GUIDE
WINCH OPERATION
Read the Winch Safety Precautions in the preceding pages before using your
winch.
TIP
Consider practicing the operation and use of your winch before you actually
need to use it in the field.
WARNING
Improper winch use can result in SEVERE INJURY or DEATH. Always follow
all winch instructions and warnings in this manual.
Each winching situation is unique.
•
•
•
•
•
•
•
Take your time to think through the winching you are about to do.
Proceed slowly and deliberately.
Never hurry or rush during winching.
Always pay attention to your surroundings.
You may need to change your winching strategy if it is not working.
Always remember that your winch is very powerful.
There are simply some situations that you and your winch will not be able to
deal with. Do not be afraid to ask others to help when this happens.
1. Always inspect the vehicle, winch, winch cable and winch controls for any
signs of damage or parts in need of repair or replacement before each use.
Pay particular attention to the first 3 feet (1 meter) of winch cable if the winch
is being used (or has been used) for lifting an accessory plow assembly.
Promptly replace any worn or damaged cable.
2. Never operate a winch or a vehicle in need of repair or service.
3. Always apply your vehicle’s park brake and/ or park mechanism to hold the
vehicle in place during winching. Use wheel chocks if needed.
75
WINCH GUIDE
4. Always use the hook strap when handling the hook.
WARNING
Never put your fingers into the hook. This could lead to SEVERE INJURY.
• Attach the hook itself onto the load or use a tow strap or chain to secure
the load to the winch cable.
TIP
A “tow strap” is NOT intended to stretch. A “recovery strap” is designed to
stretch.
WARNING
Never use a recovery strap when winching due to the excessive energy that
can be released if the winch cable breaks. This can result in SEVERE INJURY
or DEATH. See the Shock Loading section on page 81.
• Never hook the winch cable back onto itself. This will damage the winch
cable and may result in winch cable failure.
76
WINCH GUIDE
WARNING
Replace the winch cable at the first sign of damage to prevent SEVERE
INJURY or DEATH in the event of failure. For your safety, always replace
POLARIS winch parts (including the cable) with genuine POLARIS
replacement parts available at your authorized POLARIS dealer, or other
qualified dealer.
• If possible, keep the winch cable aligned with the centerline of the
winching vehicle. This will help the spooling of the winch cable and reduce
the load on the fairlead.
• If freeing a stuck vehicle by attaching to a tree, use an item such as a tow
strap to avoid damaging the tree during winch operation. Sharp cables and
chains can damage and even kill trees. Please remember to
TreadLightly® (treadlightly.org).
• Before operating the winch, be sure that the safety latch on the winch
cable hook is fully seated when the load is attached.
• Never operate your winch with a damaged hook or latch. Always replace
damaged parts before using the winch.
5. Never remove the hook strap from the hook.
6. Release the winch clutch and pull out the winch cable.
7. Pulling out as much cable as possible maximizes the winch’s pulling
capacity. Always be sure that at least five (5) full turns of winch cable are
wrapped around the winch drum at all times. The friction provided by this
wrapped cable allows the drum to pull on the winch cable and move the load.
8. Read and adhere to the following information for winch damping to ensure
safe winch use.
a. In order to absorb energy that could be released by a winch cable failure,
always place a “damper” on the winch cable. A damper can be heavy
jacket, tarp, or other soft, dense object. A damper can absorb much of the
energy released if a winch cable breaks when winching. Even a tree limb
can help as a damper if no other items are available to you.
77
WINCH GUIDE
b. Lay the damper on top of the mid-point of the winch cable length that is
spooled out.
c. On a long pull, it may be necessary to stop winching so that the damper
can be repositioned to the new mid-point of the winch cable. Always
release the tension on the winch cable before repositioning the damper.
d. Avoid being directly in line with the winch cable whenever possible. Also,
never permit others to stand near or in line with the winch cable during
winch operation.
9. Never hook the winch cable back onto itself. This will damage the winch
cable and may result in winch cable failure.
10. Never use straps, chains or other rigging items that are damaged or worn.
11. The ONLY time a winch-equipped vehicle should be moving when using the
winch is when that vehicle itself is stuck. The winch equipped vehicle should
NEVER be in motion to “shock” load the winch cable in an attempt to move a
second stuck vehicle. See the Shock Loading section on page 81. For your
safety, always follow these guidelines when winching a vehicle free:
a. Release the winch clutch and spool out the necessary length of winch
cable.
b. Align the winch cable as close as possible to the winching vehicle’s
centerline.
c. Attach the winch cable hook to the anchor point or the stuck vehicle’s
frame following instructions in this manual.
d. Re-engage the clutch on the winch.
e. Slowly winch in the slack in the winch cable.
f. Select the proper vehicle gear to propel the stuck vehicle in the direction
of winching.
g. Shift to the lowest gear available on the stuck vehicle.
h. Slowly and carefully apply vehicle throttle and winch together to free the
vehicle.
i. Stop winching as soon as the stuck vehicle is able to propel itself without
the help of the winch.
j. Detach the winch cable hook.
k. Rewind the winch cable evenly back onto the winch drum following the
instructions in this manual.
12. Never attempt to winch another stuck vehicle by attaching the winch cable to
a suspension component, brush guard, bumper or cargo rack. Vehicle
damage may result. Instead, attach the winch to a strong portion of the
vehicle frame or hitch.
78
WINCH GUIDE
13. Extensive winching will run down the battery on the winching vehicle. Let the
winching vehicle’s engine run while operating the winch to prevent the
battery from running low if winching for long periods.
14. The winch motor may become hot during winch use. If you winch for more
than 45 seconds, or if the winch stalls during operation, stop winching and
permit the winch to cool down for 10 minutes before using it again.
15. After winching is complete, especially if winching at an angle, it may be
necessary to re-distribute the winch cable across the winch drum. You will
need an assistant to perform this task.
a. Release the clutch on the winch.
b. Feed out the winch cable that is unevenly bunched up in one area.
c. Re-engage the winch clutch.
d. Have an assistant pull the winch cable tightly with about 100 lbs. (45 kg)
of tension using the hook strap.
e. Slowly winch the cable in while your assistant moves the end of the winch
cable back and forth horizontally to evenly distribute the winch cable on
the drum.
f. Doing this reduces the chances of the winch cable “wedging” itself
between lower layers of winch cable.
79
WINCH GUIDE
WINCH CABLE CARE
WARNING
Use of worn or damaged cable could lead to sudden failure and SEVERE
INJURY.
For your safety, always replace POLARIS winch parts (including the cable) with
genuine POLARIS replacement parts available at your authorized POLARIS
dealer, or other qualified person.
1. Always inspect your winch before each use. Inspect for worn or loose parts
including mounting hardware. Never use the winch if any part needs repair or
replacement.
2. Always inspect your winch cable before each use. Inspect for worn or kinked
winch cable.
A kinked winch cable made of wire rope
is shown at right. Even after being
“straightened out,” this cable has
already been permanently and severely
damaged. Promptly discontinue use of
a winch cable in this condition.
A kinked winch cable made of wire rope
that has been “straightened out” is
shown at right. Even though it may look
usable, the cable has been permanently
and severely damaged. It can no longer
transmit the load that it could prior to
kinking. Promptly discontinue use of a
winch cable in this condition.
A winch cable made of synthetic rope
should be inspected for signs of fraying.
Replace the cable if fraying is observed
(shown below). Promptly discontinue
use of a winch cable in this condition.
Also replace the winch cable if there are
fused or melted fibers. Such an area of
the synthetic rope will be stiff and
appear smooth or glazed. Promptly
discontinue use of a winch cable in this
condition.
80
WINCH GUIDE
SHOCK LOADING
WARNING
Your winch cable is very strong but it is NOT designed for dynamic, or “shock”
loading. Shock loading may tension a winch cable beyond its strength and
cause the cable to break. The end of a broken winch cable under such high
loading can cause SEVERE INJURY or DEATH to you and other bystanders.
Winch cables are designed to NOT absorb energy. This is true of both wire-rope
and synthetic-rope winch cables.
1. Never attempt to “jerk” a load with the winch. For example, never take up
slack in the winch cable by moving the winching vehicle in an attempt to
move an object. This is a dangerous practice. It generates high winch cable
loads that may exceed the strength of the cable. Even a slowly moving
vehicle can create large shock loads in a winch cable.
WARNING
SEVERE INJURY or DEATH can result from a broken winch cable.
2. Never quickly turn the winch ON and OFF repeatedly (“jogging”). This puts
extra load on the winch, winch cable, and generates excessive heat from the
motor. This is a form of shock loading.
3. Never tow a vehicle or other object with your winch. Towing an object with a
winch produces shock loading of the cable even when towing at slow
speeds. Towing from a winch also positions the towing force high on the
vehicle. This can cause instability of the vehicle and possibly lead to an
accident.
4. Never use recovery straps with your winch. Recovery straps are designed to
stretch and can store energy. This stored energy in the recovery strap is
released if a winch cable fails making the event even more hazardous.
Similarly, never use elastic “bungie” cords for winching.
5. Never use the winch to tie down a vehicle to a trailer or other transportation
vehicle. This type of use also causes shock loading that can cause damage
to the winch, winch cable, or vehicles used.
Your winch cable is designed and tested to withstand the loads produced
by the winch motor when operated from a stationary vehicle. Always
remember that the winch and winch cable are NOT designed for shock
loading.
81
WINCH GUIDE
WINCH MAINTENANCE AND SERVICE SAFETY
WARNING
Improper or lack of winch maintenance and service could lead to SEVERE
INJURY or DEATH. Always follow all winch instructions and warnings in this
manual.
1. Always inspect your winch before each use. Inspect for worn or kinked winch
cable. Also inspect for worn or loose parts including mounting hardware.
2. Permit your winch motor to cool down prior to servicing your winch.
3. Never work on your winch without first disconnecting the battery connections
to prevent accidental activation of the winch.
4. For your safety, always replace POLARIS winch parts (including the cable)
with genuine POLARIS replacement parts available at your authorized
POLARIS dealer, or other qualified person.
5. Some winch models use wire rope as the winch cable. Other winches use a
specially designed synthetic rope as the winch cable.
6. Never replace a synthetic-rope winch cable with a consumer-grade polymer
rope such as can be purchased in a hardware store. Although they may look
similar, they are NOT alike. A polymer rope not designed for winch use will
stretch and store excessive energy when winching.
WARNING
Failure of a stretched rope under winching conditions will release all of the
stored energy. This will increase the chances of SEVERE INJURY or DEATH.
82
EMISSION CONTROL SYSTEMS
EMISSION CONTROL SYSTEMS
NOISE EMISSION CONTROL SYSTEM
Do not modify the engine, intake or exhaust components, as doing so may affect
compliance with U.S.A. EPA noise control requirements (40 CFR 205) and local
noise level requirements.
OPERATION ON PUBLIC LANDS IN THE U.S.A.
Your vehicle has a spark arrester that was tested and qualified to be in
accordance with the USFS standard 5100-1C. Federal law requires that this
spark arrester be installed and functional when the vehicle is operated on public
lands.
Operation of off-road vehicles on public lands in the U.S.A. is regulated by 43
CFR 420. Violations are subject to monetary penalties. Federal regulations can
be viewed online at www.gpoaccess.gov/ecfr/.
CRANKCASE EMISSION CONTROL SYSTEM
This engine is equipped with a closed crankcase system. Blow-by gases are
forced back to the combustion chamber by the intake system. All exhaust gases
exit through the exhaust system.
EXHAUST EMISSION CONTROL SYSTEM
Exhaust emissions are controlled by engine design. An electronic fuel injection
(EFI) system controls fuel delivery. The engine and EFI components are set at
the factory for optimal performance and are not adjustable.
The emissions label is located on the right front frame of the vehicle.
ELECTROMAGNETIC INTERFERENCE
This spark ignition system complies with Canadian ICES-002.
This vehicle complies with the EMC requirements of UN ECE Regulation 10.
Non-ionizing Radiation: This vehicle emits some electromagnetic energy.
People with active or non-active implantable medical devices (such as heart
monitoring or controlling devices) should review the limitations of their device
and the applicable electromagnetic standards and directives that apply to this
vehicle.
83
84
MAINTENANCE
MAINTENANCE
PERIODIC MAINTENANCE CHART
Any qualified repair shop or person may maintain, replace or repair the emission
control devices or systems on your vehicle. An authorized dealer can perform
any service that may be necessary for your vehicle. POLARIS also recommends
POLARIS parts for emissions-related service, however equivalent parts can be
used.
It is a potential violation of the Clean Air Act if a part supplied by an aftermarket
parts manufacturer reduces the effectiveness of the vehicle’s emission controls.
Tampering with emission controls is prohibited by federal law.
Owners are responsible for performing the scheduled maintenance identified in
this owner’s manual.
Careful periodic maintenance will help keep your vehicle in the safest, most
reliable condition. Inspection, adjustment and lubrication of important
components are explained in the periodic maintenance chart.
Inspect, clean, lubricate, adjust and replace parts as necessary. When
inspection reveals the need for replacement parts, genuine POLARIS parts are
available from your POLARIS dealer, or other qualified person. Equivalent parts
may be used for emissions-related service.
Service and adjustments are important for proper vehicle operation. If you’re not
familiar with safe service and adjustment procedures, a qualified dealer can
perform these operations.
Vehicles subjected to heavy or severe use patterns must be inspected and
serviced more frequently.
SEVERE USE DEFINITION
•
•
•
•
•
•
Frequent immersion in mud, water or sand
Frequent or prolonged operation in dusty environments
Short trip cold weather operation
Racing or race-style high RPM use
Prolonged low speed, heavy load operation
Extended idle
Pay special attention to the oil level. A rise in oil level during cold weather can
indicate contaminants collecting in the oil sump or crankcase. Change oil
immediately if the oil level begins to rise. Monitor the oil level, and if it continues
to rise, discontinue use and determine the cause. Your dealer can assist.
85
MAINTENANCE
MAINTENANCE INTERVAL CHART
WARNING
Improperly performing the procedures marked with a D could result in
component failure and lead to serious injury or death. Have an authorized
POLARIS dealer or other qualified person perform these services.
SYMBOL
DESCRIPTION
XU
Perform these procedures more often for vehicles subjected to severe use.
D
Have an authorized Polaris dealer or other qualified person perform these services.
Perform all services at whichever maintenance interval is reached first. Record
maintenance and service in the Maintenance Log.
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
HOUR­
S
ITEM
CALENDAR
MILES
(KM) REMARKS
Steering
Front Suspension
Rear Suspension
Tires
Brake Fluid Level
Brake Lever Travel
Inspect and make adjustments as
needed.
Pre-Ride
Brake System
Wheels / Fasteners
CV Boot
Frame Fasteners
Engine Oil Level
Winch (if equipped)
XU
XU
86
Air Filter (PreFilter)
-
Daily
-
Inspect; clean often; replace as
needed
Air Box Sediment
Tube
-
Daily
-
Drain deposits when visible
Coolant
-
Daily
-
Check level daily, change coolant
every two years
Head Lights / Tail
Lights
-
Daily
-
Check operation; apply dielectric
grease if replacing
Power Steering
unit
(If equipped)
-
Daily
Air Filter (main
element)
-
Weekly
Inspect daily, clean often
-
Inspect; replace as needed
MAINTENANCE
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
XU
D
XU
XU
MILES
(KM)
HOURS
CALENDAR
Brake Pad Wear
10 H
Monthly
100
(160)
Inspect periodically
Battery
20 H
Monthly
200
(320)
Check terminals; clean; test
Fuel System
20 H
Monthly
-
Turn key on to pressurize fuel pump,
check lines/fittings for leaks and
abrasion.
Engine Oil Change
25 H
1M
-
Break-in oil and filter change
1M
250
(400)
Break-in fluid level check
Break-in fluid level check
ITEM
Demand Drive
Fluid
25 H
REMARKS
XU
Rear Gearcase Oil
25 H
1M
250
(400)
XU
Transmission Fluid
25 H
1M
250
(400)
Break-in fluid level check
XU
General
Lubrication
50 H
3M
500
(800)
Lubricate all fittings, pivots, cables,
etc.
Shift Linkage
50 H
3M
500
(800)
Inspect
Steering
50 H
6M
500
(800)
Lubricate
XU
Front/Rear
Suspension
50 H
6M
500
(800)
Lubricate
XU
Throttle Release
Switch
50 H
6M
500
(800)
Inspect; adjust; lubricate; replace if
necessary
Throttle Body
Intake Duct
50 H
6M
500
(800)
Inspect ducts for proper sealing / air
leaks
Drive Belt
50 H
6M
500
(800)
Inspect ducts for proper sealing / air
leaks
Cooling System
50 H
6M
1000
(1600)
Inspect coolant strength seasonally;
pressure test system yearly
XU
Radiator
50 H
6M
1000
(1600)
Inspect; clean external surfaces
XU
Cooling Hoses
50 H
6M
1000
(1600)
Inspect for leaks
XU
Oil lines and
fasteners
100 H
6M
1000
(1600)
Inspect for leaks and loose fittings
XU
Engine oil change
100 H
6M
1000
(1600)
Change the oil and filter
XU
Demand drive fluid
(normal use)
100 H
12 M
600
(1000)
Change fluid
XU
Rear gearcase oil
100 H
12 M
600
(1000)
Change fluid
D
87
MAINTENANCE
MAINTENANCE INTERVAL
(WHICHEVER COMES FIRST)
HOURS
ITEM
CALENDAR
MILES
(KM)
Change fluid
REMARKS
Transmission oil
100 H
12 M
600
(1000)
Fuel System
100 H
12 M
600
(1000)
Cycle key to pressurize fuel pump;
check for leaks at fill cap, fuel lines/
rail and fuel pump
Engine Mounts
100 H
12 M
1000
(1600)
Inspect
Exhaust Pipe /
Silencer
100 H
12 M
1000
(1600)
Inspect
XU
Spark Plug
100 H
12 M
600
(1000)
Inspect; replace as needed
XU
Wiring
100 H
12 M
1000
(1600)
Inspect for wear, routing, security;
apply dielectric grease to connectors
subjected to water, mud, etc.
D
Clutches (Drive/
Driven)
100 H
12 M
1000
(1600)
Inspect; clean; replace worn parts
D
Wheel Bearings
100 H
12 M
1000
(1600)
Inspect; replace as needed
D
Brake Fluid
200 H
24 M
2000
(3200)
Change every two years
Spark Arrestor
300 H
36 M
3000
(4800)
Clean out; or remove clean out plug
-
60 M
-
500 H
-
5000
(8000)
XU
D
XU
Replace coolant (50/50 Extended Life
Coolant)
XU
Coolant
XU
Valve Clearance
D
Toe Adjustment
-
Inspect periodically; adjust as needed
Headlight Aim
-
Adjust as needed
88
Inspect; adjust as needed
MAINTENANCE
LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM
RECOM­
MENDED
LUBRICANT
CAPACITY
AT FLUID
CHANGE
FILL PLUG
TORQUE
DRAIN
PLUG
TORQUE
SEE PAGE
Engine Oil
PS-4 5W-50
4-Cycle Oil
2 qt.
(1.9 l)
—
12 ft-lbs
(16 Nm)
page 90
Transmission
Oil
AGL
Gearcase
Lubricant &
Transmission
Fluid
37 oz.
(1100 ml)
10-14 ft-lbs
(14-19 Nm)
10-14 ft-lbs
(14-19 Nm)
page 93
Demand
Drive Fluid
(Front
Gearcase)
Demand
Drive Fluid
9.3 oz. (275
ml)
8-10 ft-lbs
(11-14 Nm)
11 ft-lbs
(15 Nm)
page 94
Rear
Gearcase Oil
ATV Angle
Drive Fluid
(or GL5 8090 weight
gear lube)
7.1 oz. (210
ml)
10-14 ft-lbs
(14-19 Nm)
10-14 ft-lbs
(14-19 Nm)
page 95
Brake Fluid
DOT 4 Brake
Fluid
—
—
—
page 33
Front Prop
Shaft Yoke
U-Joint
Grease
Grease fittings (3 pumps maximum) every 500 miles, before long
periods of storage, or after pressure washing or submerging.
A-Arms,
Front and
Rear
POLARIS AllSeason
Grease
Grease fittings after extreme use or if suspension becomes
squeaky.
89
MAINTENANCE
ENGINE OIL
Always check and change the oil at the intervals outlined in the Periodic
Maintenance Chart. Always use the recommended engine oil. Always change
the oil filter whenever changing oil.
Pay special attention to the oil level. A rise in oil level during cold weather can
indicate contaminants collecting in the oil sump or crankcase. Change oil
immediately if the oil level begins to rise. Monitor the oil level, and if it continues
to rise, discontinue use and determine the cause. Your dealer can assist.
WARNING
Vehicle operation with insufficient, deteriorated, or contaminated engine oil will
cause accelerated wear and may result in engine seizure, accident and injury.
Always perform the maintenance procedures as outlined in the Periodic
Maintenance Chart.
OIL RECOMMENDATIONS
Always change the oil filter whenever changing oil.
POLARIS recommends the use of POLARIS PS-4 Full Synthetic 5W-50 4-cycle
oil or a similar oil for this engine. Oil may need to be changed more frequently if
POLARIS oil is not used. Always use 5W-50 oil. Follow the manufacturer's
recommendations for ambient temperature operation.
See the Lubrication Guide section for fluid recommendations, capacities and
plug torques.
NOTICE
Mixing brands or using a non-recommended oil may cause serious engine
damage. Always use the recommended oil. Never substitute or mix oil brands.
90
MAINTENANCE
OIL LEVEL
Check the oil level when the engine is cold. Never check the oil with the engine
running.
1. Position the vehicle on a level surface.
2. Access the oil dipstick and fill tube from the left side of the ATV q. Remove
the dipstick. Wipe it dry with a clean cloth.
3. Reinstall and tighten the dipstick.
4. Remove the dipstick and check the oil level
5. Add the recommended fluid as needed. Maintain the oil level in the safe
range between the FULL and ADD marks. Do not overfill.
6. Reinstall and tighten the dipstick.
OIL AND FILTER CHANGE
See the fluid recommendation table for capacities and plug torques. Always
change the oil and filter at the intervals outlined in the Periodic Maintenance
Chart beginning on page 86. Always change the oil filter whenever changing oil.
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to warm up at idle for two to three minutes.
3. Stop the engine.
91
MAINTENANCE
4. Clean the area around the drain plug q.
5. Place a drain pan under the crankcase.
6. Remove the drain plug q. Allow the oil to drain completely.
CAUTION
Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
7. Install a new sealing washer on the drain plug. The sealing surfaces on drain
plug and crankcase should be clean and free of burrs, nicks or scratches.
8. Reinstall the drain plug. Torque to specification.
9. Remove the oil filter cover plate w by loosening the three screws holding into
place.
10. Place shop towels beneath the oil filter e. Using an oil filter wrench
(available from your POLARIS dealer), turn the filter counter- clockwise to
remove it.
11. Using a clean dry cloth, clean the filter sealing surface on the crankcase.
12. Lubricate the o-ring on the new filter with a film of fresh engine oil. Check to
make sure the o-ring is in good condition.
13. Install the new filter and rotate it clockwise by hand until the filter gasket
contacts the sealing surface, then turn it an additional 3/4 turn.
14. Remove the dipstick. Add the proper amount of the recommended oil. Do not
overfill.
15. Reinstall the dipstick.
16. Place the transmission in PARK.
17. Lock the parking brake.
18. Start the engine. Allow it to idle for one to two minutes.
19. Stop the engine.
20. Check for leaks.
21. Check the oil level. Add oil as needed to bring the level to the upper mark on
the dipstick.
22. Dispose of used filter and oil properly.
92
MAINTENANCE
TRANSMISSION OIL
Always check and change the
transmission oil at the intervals
outlined in the Periodic Maintenance
Chart. See the Fluid Recommendation
table for capacities and plug torques.
Maintain the oil level at the bottom of
the fill plug hole w. The fill plug is
located on the right side of the ATV
behind the footwell. The drain plug q
is located on the bottom rear side of
the gearcase.
OIL CHECK
1. Remove the fill plug. Check the oil level.
2. Add the recommended fluid as needed to bring the level to the bottom of the
fill hole threads.
3. Reinstall the fill plug. Torque to specification.
4. Reinstall the footwell.
OIL CHANGE
1. Place a drain pan under the gearcase. Remove the drain plug. Allow the oil
to drain completely.
2. Clean and reinstall the drain plug. Torque to specification.
3. Remove the fill plug. Add the proper amount of the recommended oil.
4. Reinstall the fill plug. Torque to specification.
5. Check for leaks.
6. Reinstall the footwell.
7. Dispose of used oil properly.
93
MAINTENANCE
FRONT GEARCASE (DEMAND DRIVE) FLUID
Always check and change the demand drive fluid at the intervals outlined in the
Periodic Maintenance Chart.
Change the front gearcase fluid every 25 hours if the ADC unit is exposed to
extreme use. Extreme use includes any of the following:
• operation in ADC mode for prolonged periods
• constant ADC operation on hilly or mountainous terrain
• ADC is the primary mode of all-wheel-drive operation
TIP
If the front gearcase is making excessive noise during ADC operation, change
the demand drive fluid. If the noise continues, please see your POLARIS
dealer or other qualified service facility for service.
Use the recommended fluid. Use of other fluids may result in improper operation
of components. Maintain the fluid level at the bottom of the fill hole threads. The
fill plug is located on the right side of the demand drive unit. The drain plug is
located on the bottom right side of the unit.
FLUID CHECK
1. Position the vehicle on a level
surface. Remove the fill plug q.
Check the fluid level.
2. Add the recommended fluid as
needed to bring the level to the
bottom of the fill hole threads.
3. Reinstall the fill plug. Torque to
specification.
FLUID CHANGE
1. Position the vehicle on a level surface. Remove the fill plug.
2. Place a drain pan under the demand drive unit. Remove the drain plug w.
Allow the fluid to drain completely.
3. Clean and reinstall the drain plug. Torque to specification.
4. Add the proper amount of the recommended fluid.
5. Reinstall the fill plug. Torque to specification.
6. Check for leaks. Dispose of used fluid properly.
94
MAINTENANCE
REAR GEARCASE OIL
Always check and change the rear gearcase oil at the intervals outlined in the
Periodic Maintenance Chart. See page 123 for the part numbers of POLARIS
products.
The fill plug is located on the rear of the gearcase. The drain plug is located on
the bottom of the gearcase.
Maintain the fluid level at the bottom of the fill hole threads. Do not overfill.
OIL CHECK
1. Position the vehicle on a level
surface.
2. Remove the fill plug q. Check the
oil level.
3. Add the recommended oil as
needed to bring the level to the
bottom of the fill hole threads. Do
not overfill.
4. Reinstall the fill plug. Torque to
specification.
OIL CHANGE
1. Position the vehicle on a level surface.
2. Place a drain pan under the drain holew.
3. Remove the drain plug. Allow the oil to drain completely.
4. Clean and reinstall the drain plug with a new sealing washer. Torque to
specification.
5. Remove the fill plug. Add the proper amount of the recommended oil. Do not
overfill.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks.
8. Dispose of used oil properly.
95
MAINTENANCE
POWER STEERING UNIT
If your model is equipped with
power steering, frequently clean the
areas around and on the power
steering unit to allow proper cooling.
Clean these areas e thoroughly.
STEERING ASSEMBLY
The steering assembly of the ATV should be checked periodically for loose nuts
and bolts. If loose nuts and bolts are found, see your authorized dealer or other
qualified service facility before operating the vehicle.
COOLING SYSTEM
The engine coolant level is controlled, or maintained, by the recovery system.
The recovery system components are the recovery bottle, the radiator filler neck,
the radiator pressure cap and the connecting hose.
As coolant operating temperature increases, the expanding (heated) excess
coolant is forced out of the engine, past the pressure cap, and into the recovery
bottle. As engine coolant temperature decreases the contracting (cooled)
coolant is drawn back up from the bottle, past the pressure cap, and into the
radiator.
Some coolant level drop on new vehicles is normal as the system is purging
itself of trapped air. Check the coolant level and maintain as recommended by
adding coolant to the recovery bottle.
POLARIS recommends the use of POLARIS Antifreeze 50/50 Premix. This
antifreeze is already premixed and ready to use. Do not dilute with water. See
the Polaris Products section for the part numbers.
RECOVERY BOTTLE COOLANT
The recovery bottle fluid level can be viewed from inside the front right wheel
well. Access the recovery bottle cap under the front box.
1. View the fluid level in the bottle.
2. If the level is low, remove the bottle cap and add coolant as needed. Maintain
the coolant level between the minimum and maximum marks on the bottle
(when the fluid is cool).
3. Reinstall the cap.
4. Close and secure the front box and cover.
96
MAINTENANCE
RADIATOR COOLANT
To ensure that the coolant maintains its ability to protect the engine, we
recommend that the system be completely drained every five (5) years and fresh
Antifreeze 50/50 Premix added.
Any time the cooling system has been drained for maintenance or repair,
replace the coolant with fresh Antifreeze 50/50 Premix. If the recovery bottle has
run dry, check the level in the radiator. Add coolant as needed.
CAUTION
Escaping steam can cause burns. Never remove the pressure cap while the
engine is warm or hot. Always allow the engine to cool before removing the
pressure cap.
1. Access the pressure cap under the front box. See the Front Compartment
section for details.
2. Remove the pressure cap.
3. Using a funnel, slowly add coolant through the radiator filler neck.
4. Reinstall the pressure cap. Use of a non-standard pressure cap will not allow
the recovery system to function properly. Your POLARIS dealer can provide
the correct replacement part.
5. Close and secure the front box and cover.
BRAKES
HAND BRAKE
The front and rear brakes are hydraulic disc brakes, activated by moving the
single brake lever toward the handlebar. These brakes are self- adjusting.
Under normal operation, the diaphragm extends into the reservoir as fluid level
drops. If the fluid level is low and the diaphragm is not extended, a leak is likely
and the diaphragm should be replaced. To ensure proper diaphragm operation,
always fill the reservoir as needed whenever the cover is loosened or removed.
Do not overfill.
WARNING
An over-full master cylinder may cause brake drag or brake lock- up, which
could result in serious injury or death. Maintain brake fluid at the recommended
level. Do not overfill.
The following checks are recommended to keep the brake system in good
operating condition. Check more often if brakes are used heavily under normal
operation.
97
MAINTENANCE
1. Always keep brake fluid at an adequate level. See the Master Cylinder/Brake
Fluid section for details.
2. Check the brake system for fluid leaks.
3. Check the brakes for excessive travel or spongy feel.
4. Check the friction pads for wear, damage and looseness. Replace brake
pads when they are worn to .030” (0.762 mm).
5. Check the security and surface condition of the disc. Clean any grease using
a recommended brake cleaner or alcohol. Do not use spray lubricants or
other petroleum-based products. If you discover any damage (cracks,
excessive corrosion, warping) see your dealer for service before operating.
AUXILIARY FOOT BRAKE
The hydraulic auxiliary brake system requires no adjustment. Check the brake
fluid level frequently for the auxiliary brake system.
SEAT REMOVAL
1. Grasp one side of the seat near the rear edge.
2. Pull upward abruptly to disengage the under-seat fasteners.
3. Remove the seat.
SIDE PANEL/FOOTWELL REMOVAL
Remove the seat before removing a side panel. To remove a side panel or
footwell, remove the fasteners securing it to the frame. Lift the right side panel
upward while removing it to clear the shifter knob.
TIRES
WARNING
Operating your ATV with worn tires, improperly inflated tires, non-standard tires
or improperly installed tires will affect vehicle handling and could cause an
accident resulting in serious injury or death. Always follow all tire maintenance
procedures as outlined in this manual and on the labels on the vehicle. Always
use original equipment size and type when replacing tires.
Refer to the specifications section for recommended tire type, size and pressure.
98
MAINTENANCE
TIRE TREAD DEPTH
Always replace tires when tread depth
is worn to 1/8” (3 mm) or less.
FRONT WHEEL HUB TIGHTENING
Front wheel bearing tightness and spindle nut retention are critical component
operations. All service must be performed by your authorized dealer or other
qualified service facility.
WHEEL REMOVAL
1. Stop the engine.
2. Place the transmission in PARK.
3. Lock the parking brake.
4. Loosen the wheel nuts slightly.
WARNING
Do not service axle nuts that have a cotter pin installed. Your authorized dealer
can assist.
5. Elevate the side of the vehicle by placing a suitable stand under the foot rest
frame.
6. Remove the wheel nuts.
7. Remove the wheel.
99
MAINTENANCE
WHEEL INSTALLATION
1. Place the transmission in PARK.
2. Lock the parking brake.
3. Place the wheel on the hub with the valve stem toward the outside and
rotation arrows on the tire pointing toward forward rotation (if equipped).
4. Install the wheel nuts and finger-tighten them.
5. Lower the vehicle to the ground.
6. Torque the wheel nuts to specification.
WARNING
Loose nuts could cause a tire to come off during operation, which could result
in an accident or overturn. Always ensure that all nuts are torqued to
specification.
WHEEL NUT TORQUE SPECIFICATIONS
Check the wheel nut torques occasionally and when they've been loosened for
service.
100
WHEEL TYPE
NUT TORQUE
Aluminum Wheel Lug Nuts
75 ft-lbs (102 Nm)
Steel Wheel Lug Nuts
45 ft-lbs (61 Nm)
MAINTENANCE
TOE ALIGNMENT
WARNING
Severe injury or death can result from improper toe alignment and adjustment.
Do not attempt to adjust tie rod alignment. All tie rod adjustments should be
performed by an authorized POLARIS dealer or other qualified service facility.
Use the following procedure to check the toe alignment of the vehicle. The
recommended toe alignment is 1/4-1/2 inch (6-12 mm).
1. Position the vehicle on a level surface.
2. Place the handlebars in a straight-ahead position.
3. Tie a length of string between two stands as shown in the illustration.
Position the stands so that the string is flush with the side of the rear tire. If
available, you may use a long straight-edge instead of string.
4. Measure the distance from the string to the rim at the front q and rear w of
the front rim. The rear measurement should be 1/8–1/4 inch (3–6 mm) more
than the front measurement on each side of the vehicle to obtain the
recommended 1/4–1/2 inch (6–12 mm) toe out alignment.
5. Repeat the measurement procedure on the other side of the vehicle.
6. If you discover improper alignment, see your POLARIS dealer for service.
101
MAINTENANCE
AIR FILTER INSTALLATION
1. Remove the seat, the air box cover strap, and remove the air box cover.
2. Remove the filter.
3. Remove the fabric type pre- filter from the main filter. Wash the pre-filter in
soapy water, then rinse and let dry.
4. Reinstall the pre-filter over the main filter. Install a new main filter if needed.
5. Reinstall the filter into the air box.
6. Reinstall the air box cover and the seat.
FUSE REPLACEMENT
If the engine stops or will not start, or if you experience other electrical failures, a
fuse may need replacement. Locate and correct any short circuits that may have
caused the blown fuse, then replace the fuse.
Spare fuses are provided in the fuse box.
1. Access the fuses under the front box.
2. Remove the fuse box cover.
3. Remove the suspect fuse from the fuse panel. If the fuse is blown, install a
new fuse with the same amperage rating.
4. Reinstall the fuse box cover.
5. Close and secure the front box and cover.
SCRAMBLER® XP 1000
SPARE
20A
FAN CKT
BKR
20A
UN­
SWITCH­
ED
10A
EFI
10A
FUEL
PUMP
10A
SPARE
20A
EPS
30A
ACCES­
SORY
20A
DRIVE
20A
LIGHTS
20A
START
RELAY
EPS
RELAY
FUEL
PUMP
RELAY
FAN
RELAY
102
SPARE
30A
CHASSIS
RELAY
EFI
RELAY
MAINTENANCE
LIGHTS
HEADLIGHT BEAM INSPECTION
Poor lighting can result in reduced visibility when driving. Headlight and taillight
lenses become dirty during normal operation. Clean lights frequently and
replace burned out lamps promptly. Always make sure lights are adjusted
properly for best visibility.
The headlight beam can be adjusted slightly upward or downward. Use the
following procedure to make the adjustment.
1. Position the vehicle on a level surface with the headlight approximately 25 ft.
(7.6 m) from a wall q. Place the transmission in PARK.
2. Measure the distance from the floor to the center of the headlight and make a
mark on the wall at the same height.
3. Start the engine. Turn the headlight switch to high beam.
4. Observe the headlight aim on the wall. The most intense part of the headlight
beam should be 2 in. (5 cm) below the mark on the wallw. Include rider
weight on the seat when measuring.
5. The adjustment screw is located on the left side of the headlight pod. To
adjust the beam, loosen the screw. Adjust the headlamp to the desired
position, then tighten the screw.
103
MAINTENANCE
HEADLIGHT BEAM ADJUSTMENT
The headlight beam can be adjusted
horizontally and vertically.
Tighten or loosen one or more of the
three headlight adjustment screws q
to adjust the beam upward or
downward or to the left or right.
HEADLAMP REPLACEMENT
If a headlight becomes damaged or inoperable, the entire headlight assembly
must be replaced.
TAILLIGHT/BRAKELIGHT LAMP REPLACEMENT
The taillight assembly is not serviceable. If the light fails to operate properly,
replace the entire taillight assembly.
SPARK PLUGS
SPARK PLUG RECOMMENDATIONS
Refer to the specifications section for the recommended spark plug type and
gap for your vehicle. Torque spark plugs to specification.
NOTICE
Using non-recommended spark plugs can result in serious engine damage.
Always use POLARIS-recommended spark plugs or their equivalent.
104
PLUG CONDITION
TORQUE SPECIFICATION
New Spark Plug
18-20 ft-lbs
(24-27 Nm)
Previously Installed Spark Plug
18-20 ft-lbs
(24-27 Nm)
MAINTENANCE
SPARK PLUG INSPECTION
Spark plug condition is indicative of engine operation. Check the spark plug
firing end condition after the engine has been warmed up and the vehicle has
been driven at higher speeds. Immediately check the spark plug for correct
color.
CAUTION
A hot exhaust system and engine can cause burns. Wear protective gloves
when removing a spark plug for inspection.
1. Rotate the spark plug cap 1/4 turn and pull it off the spark plug.
2. Rotate the spark plug counter-clockwise to remove it.
3. Reverse the procedure for spark plug installation. Torque to specification.
NORMAL PLUG
The normal insulator tip is gray, tan or light brown. There will be few combustion
deposits. The electrodes are not burned or eroded. This indicates the proper
type and heat range for the engine and the service.
The tip should not be white. A white insulator tip indicates overheating, caused
by use of an improper spark plug or incorrect throttle body adjustments.
WET FOULED PLUG
The wet fouled insulator tip is black. A damp oil film covers the firing end. There
may be a carbon layer over the entire nose. Generally, the electrodes are not
worn. General causes of fouling are excessive oil, use of non-recommended oil
or poor fuel quality.
105
MAINTENANCE
VEHICLE IMMERSION
If your vehicle becomes immersed, major engine damage can result if the
machine is not thoroughly inspected. Take the vehicle in for service before
starting the engine. Your POLARIS dealer can provide this service.
If it's impossible to take your ATV to a dealer before starting it, follow the steps
outlined below.
1. Move the ATV to dry land or at the very least, to water below the footrests.
2. Check the air box. If water is present, dry the air box and replace the filter
with a new filter. If equipped, remove the air box drain plug to drain water.
Reinstall the drain plug. Make sure the E-ring is on the drain plug and
reinstall the drain plug.
NOTICE
Serious damage could occur if the air box drain plug is not reinstalled and
tightened properly.
3. Remove the spark plugs.
4. Turn the engine over several times using the electric start.
5. Dry the spark plugs. Reinstall the plugs or install new plugs.
6. Attempt to start the engine. If necessary, repeat the drying procedure.
NOTICE
Serious damage can occur after immersion if fluids are not changed promptly.
Your POLARIS dealer can assist.
7. Take the vehicle in for service as soon as possible, whether you succeed in
starting it or not. Your POLARIS dealer can provide the required service.
8. If water has been ingested into the PVT, follow the procedure on page 109
for drying out the PVT.
106
MAINTENANCE
SPARK ARRESTER
WARNING
Failure to heed the following warnings while servicing the spark arrester could
result in serious injury or death.
• Never run the engine in an enclosed area. Exhaust contains poisonous
carbon monoxide gas that can cause loss of consciousness or death in a
very short time.
• Wear eye protection and leather work gloves.
• Do not perform clean-out immediately after the engine has been run, as the
exhaust system becomes very hot. Serious burns could result from contact
with the exhaust components. Allow components to cool sufficiently before
proceeding.
Never operate without the spark arrester
Periodically clean the spark arrester to remove accumulated carbon.
1. Place the transmission in PARK.
2. Remove the arrester retaining bolt and nut.
3. Remove the arrester from the end of the muffler.
4. Use non-synthetic brush to clean the arrester screen. A synthetic brush may
melt if the components are warm. If necessary, blow debris from the screen
with compressed air.
5. Inspect the screen for wear and damage. Replace a worn or damaged
screen.
6. Reinstall the arrester.
7. Torque the bolt to 7–9 ft. lbs. (10–12 Nm).
107
MAINTENANCE
PVT SYSTEM
WARNING
Failure to comply with the instructions in this warning can result in severe injury
or death.
Do not modify any component of the PVT system. Doing so may reduce its
strength so that a failure may occur at a high speed. The PVT system has been
precision balanced. Any modification will cause the system to be out of
balance, creating vibration and additional loads on components.
The PVT system rotates at high speeds, creating large amounts of force on
clutch components. Extensive engineering and testing has been conducted to
ensure the safety of this product. However, as the owner, you have the
following responsibilities to make sure this system remains safe:
• Always follow all recommended maintenance procedures. Always look for
and remove debris inside and around the clutch and vent system when
replacing the belt.
• See your POLARIS dealer, or other qualified person, for service and repair
assistance.
• This PVT system is intended for use on POLARIS products only. Do not
install it in any other product.
• Always make sure the PVT housing is securely in place during operation.
The basic operation of the POLARIS PVT system is dependent on engine speed
and vehicle torque requirements. As engine speed increases, the force exerted
on the movable drive sheave by the flyweights also increases. This, in turn,
increases the amount of pinch applied to the drive belt. Similarly, if the engine
speed decreases, the amount of centrifugal force decreases, reducing the
amount of belt pinch.
On POLARIS ATVs, the approximate gear ratio difference between high and low
range is 1:2.25. This difference in gearing affects the operation of the PVT,
especially at speeds less than 7 MPH (11 km/h), due to the system's
dependence on engine speed.
For example, when operating at a ground speed of 3 MPH (5 km/h) in low range,
the engine speed would be around 3000 RPM. This is well above the
engagement speed of 1600 - 1800 RPM. However, in high range at 3 MPH (5
km/h), the engine would be running at only 1500 RPM. Whenever operating this
close to the engagement speed, the engine may be running at a speed too low
to provide the pinch needed to prevent belt slip. Belt slip is responsible for
creating the excessive heat that destroys belts, wears clutch components and
causes outer clutch covers to fail.
The air temperature in the clutch cover is substantially reduced by using low
range while operating at low ground speeds. Reducing the temperature inside
108
MAINTENANCE
the clutch cover greatly extends the life of the PVT components (belt, cover,
etc.).
WHEN TO USE LOW RANGE AND HIGH RANGE
CONDITION
RANGE TO USE
Operating at speeds less than 7 MPH
(11 km/h)
Low
Towing heavy loads
Low
Operating in rough terrain (swamps,
mountains, etc.)
Low
Operating at speeds greater than 7
MPH (11 km/h)
High
PVT DRYING
There may be some instances when water is accidently ingested into the PVT
system. Use the following instructions to dry it out before operating.
1. Position the vehicle on a level surface.
2. Remove the drain plug. Allow the water to drain completely. Reinstall the
drain plug.
3. Start the engine. Place the transmission in PARK.
4. Apply varying throttle for 10-15 seconds to expel the moisture and air-dry the
belt and clutches. Do not hold the throttle wide open for more than 5
seconds.
5. Allow the engine RPM to settle to idle speed, then shift the transmission to
low range.
6. Test for belt slippage. If the belt slips, repeat the process. Your vehicle
requires service as soon as possible, which your authorized dealer can
provide.
109
MAINTENANCE
BATTERY
WARNING
Improperly connecting or disconnecting battery cables can result in an
explosion and cause serious injury or death. When removing the battery,
always disconnect the negative (black) cable first. When reinstalling the
battery, always connect the negative (black) cable last.
Your ATV is equipped with a sealed battery, which requires little maintenance.
POLARIS does not recommend using a conventional battery in this vehicle. The
orientation of the battery could result in electrolyte leakage, which would shorten
the life of the battery considerably.
Always keep battery terminals and connections free of corrosion. If cleaning is
necessary, remove corrosion with a stiff wire brush. Wash with a solution of one
tablespoon baking soda and one cup water. Rinse well with tap water and dry off
with clean shop towels. Coat the terminals with dielectric grease or petroleum
jelly.
BATTERY REMOVAL
1. Access the battery under the front box.
2. Disconnect the black (negative) battery cable first.
3. Disconnect the red (positive) battery cable last.
4. Disconnect the battery hold-down strap.
5. Lift the battery out of the ATV.
BATTERY INSTALLATION
Using a new battery that has not been fully charged can damage the battery and
result in a shorter life. It can also hinder vehicle performance. Follow the
instructions in the Battery Charging section before installing the battery.
An optional extreme use battery may be available for your model. If the
performance of the factory-installed battery is inadequate due to operation in
extreme cold or due to extended use of multiple electrical accessories, your
authorized dealer can assist. Your dealer can provide any installation
procedures that may differ for an extreme use battery.
1. Ensure that the battery is fully charged.
2. Place the battery in the battery holder.
3. Coat the terminals with dielectric grease or petroleum jelly.
4. Secure the battery hold-down strap.
5. Connect and tighten the red (positive) cable first.
110
MAINTENANCE
6. Connect and tighten the black (negative) cable last.
7. Verify that cables are properly routed. Cables should be safely tucked away
at the front and rear of the battery.
8. Close and secure the front box and cover.
BATTERY STORAGE
Whenever the vehicle is not used for a period of three months or more, remove
the battery from the vehicle, ensure that it's fully charged, and store it out of the
sun in a cool, dry place. Check battery voltage each month during storage and
recharge as needed to maintain a full charge.
POLARIS recommends maintaining battery charge by using a POLARIS Battery
Tender charger or by charging about once a month to make up for normal selfdischarge. Battery Tender can be left connected during the storage period, and
will automatically charge the battery if the voltage drops below a pre-determined
point. See the Polaris Products section for the part numbers.
BATTERY CHARGING
The following battery charging instructions apply only to the installation of a
sealed battery. Read all instructions before proceeding with the installation of
this battery.
The sealed battery is already filled with electrolyte and has been sealed and fully
charged at the factory. Never pry the sealing strip off or add any other fluid to this
battery.
The single most important thing about maintaining a sealed battery is to keep it
fully charged. Since the battery is sealed and the sealing strip cannot be
removed, you must use a voltmeter or multimeter to measure DC voltage.
WARNING
An overheated battery may explode, causing severe injury or death. Always
watch charging times carefully. Stop charging if the battery becomes very
warm to the touch. Allow it to cool before resuming charging.
For a refresh charge, follow all instructions carefully.
1. The battery should be disconnected from a load or charger for at least two
hours before checking voltage. Check the battery voltage with a voltmeter or
multimeter. A fully charged battery will register 12.8 V or higher.
2. If the voltage is less than 12.8 volts, recharge the battery at 1.2 amps or less
until battery voltage is 12.8 or greater.
3. When using an automatic charger, refer to the charger manufacturer's
instructions for recharging. When using a constant current charger, use the
following guidelines via the table below.
111
MAINTENANCE
BATTERY CHARGING (SEALED BATTERY)
Always verify battery condition before and 1-2 hours after the end of charging.
STATE OF CHARGE
VOLTAGE
ACTION
CHARGE TIME
(USING CONSTANT
CURRENT
CHARGER @
STANDARD AMPS
SPECIFIED ON TOP
OF BATTERY)
100%
12.8-13.0 volts
None, check at 3 mos.
from date of
manufacture
None required
75%-100%
12.5-12.8 volts
May need slight
charge, if no charge
given, check in 3
months
3-6 hours
50%-75%
12.0-12.5 volts
Needs charge
5-11 hours
25%-50%
11.5-12.0 volts
Needs charge
At least 13 hours,
verify state of charge
0%-25%
11.5 volts or less
Needs charge with
desulfating charger
At least 20 hours
CAMBER AND CASTER
The camber and caster are non-adjustable.
FRONT/REAR SHOCK COMPRESSION
The compression damping clicker knob is located on the top of the front shock
reservoir and on the bottom of the rear shock reservoir. When the knob is turned
clockwise until it stops, the damping is in the fully closed position.
FOX SHOCKS
SETTING
COMPRESSION DAMPING
Softest
20 clicks from closed
Factory
10 clicks from closed
Firmest
2 clicks from closed
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression damping.
112
MAINTENANCE
THROTTLE BODY/IDLE RPM
Idle RPM is preset by the manufacturer. If the engine idle speed is not
satisfactory, please see your POLARIS dealer or other qualified service facility
for adjustment.
HANDLEBARS
The handlebars can be adjusted for rider preference.
WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster
block tightening bolts can cause limited steering or loosening of the
handlebars, resulting in loss of control and serious injury or death. Follow the
adjustment procedures exactly, or see your POLARIS dealer for service.
1. Remove the upper headlight pod.
2. Loosen the four handlebar bolts.
3. Adjust the handlebar to the desired height. Be sure the handlebars do not
contact the gas tank or any other part of the machine when turned fully to the
left or right.
4. Torque the front two bolts to 10-12 ft-lbs (14-17 Nm), then torque the rear two
bolts. A gap of up to 1/8" (3 mm) will remain at the rear of the clamp blocks.
CLEANING AND STORAGE
WASHING THE VEHICLE
If a high pressure water system is used for cleaning (not recommended),
exercise extreme caution. The water may damage components and could
remove paint and decals. Avoid directing the water stream at the following items:
•
•
•
•
•
•
•
•
Wheel bearings
Radiator
Transmission seals
Cab and body panels
Electrical components
Switches and controls
Fuel system components
Labels and decals
If an informational or graphic label becomes illegible or comes off, contact your
POLARIS dealer to purchase a replacement. Replacement safety labels are
provided by POLARIS at no charge.
113
MAINTENANCE
Grease all zerk fittings immediately after washing. Allow the engine to run for a
while to evaporate any water that may have entered the engine or exhaust
system.
WASHING TIPS
•
•
•
•
Avoid the use of harsh cleaners, which can scratch the finish.
Do not use a power washer to clean the vehicle.
Do not use medium to heavy duty compounds on the finish.
Always use clean cloths and pads for cleaning and polishing. Old or reused
cloths and pads may contain dirt particles that will scratch the finish.
POLISHING THE VEHICLE
POLARIS recommends the use of common household aerosol furniture polish
for polishing the finish on your POLARIS vehicle. Follow the instructions on the
container.
POLISHING TIPS
• Avoid the use of automotive products, some of which can scratch the finish of
your vehicle.
• Always use clean cloths and pads for cleaning and polishing. Old or reused
cloths and pads may contain dirt particles that will scratch the finish.
114
MAINTENANCE
CLEANING AND STORAGE
STORAGE TIPS
NOTICE
Starting the engine during the storage period will disturb the protective film
created by fogging and damage could occur. Never start the engine during the
storage period.
CLEAN THE EXTERIOR
Make any necessary repairs and clean the vehicle as recommended. See the
Washing the Vehicle section.
STABILIZE THE FUEL
1. Fill the fuel tank.
2. Add POLARIS Carbon Clean Fuel Treatment or POLARIS Fuel Stabilizer or
equivalent fuel treatments or stabilizers. Follow the instructions on the
container for the recommended amount. Carbon Clean removes water from
fuel systems, stabilizes fuel and removes carbon deposits from pistons,
rings, valves and exhaust systems.
3. Allow the engine to run for 15-20 minutes to allow the stabilizer to disperse
through the entire fuel delivery system.
OIL AND FILTER
Change the oil and filter. See the Engine Oil section.
AIR FILTER / AIR BOX
Replace the air filter. See Maintenance Chapter. Clean the air box.
FLUID LEVELS
Inspect the fluid levels. Add or change fluids as recommended in the Periodic
Maintenance Chart.
•
•
•
•
Demand drive fluid (front gearcase)
Rear gearcase fluid (if equipped)
Transmission fluid
Brake fluid (change every two years and any time the fluid looks dark or
contaminated)
• Coolant (test strength/fill)
INSPECT AND LUBRICATE
Inspect all cables and lubricate all areas of the vehicle as recommended in the
Periodic Maintenance Chart.
115
MAINTENANCE
FOG THE ENGINE
1. Treat the fuel system with POLARIS Carbon Clean or other equivalent fuel
treatment. Follow the instructions on the container. Start the engine. Allow it
to idle for several minutes so the Carbon Clean reaches the injectors. Stop
the engine.
2. Remove the spark plugs and add 2-3 tablespoons of engine oil. To access
the plug holes, use a section of clear 1/4” hose and a small plastic squeeze
bottle filled with the pre-measured amount of oil. Do this carefully! If you miss
the plug holes, oil will drain from the spark plug cavities into the hole at the
front of the cylinder head, and appear to be an oil leak.
3. Reinstall the spark plugs. Torque to specification.
4. Apply dielectric grease to the inside of each spark plug cap. Do not reinstall
the cap onto the plug at this step.
5. Turn the engine over several times. Oil will be forced in and around the
piston rings and ring lands, coating the cylinder with a protective film of fresh
oil.
6. Reinstall the spark plug caps.
7. If POLARIS fuel system additive is not used, fuel tank, fuel lines, and
injectors should be completely drained of gasoline.
BATTERY MAINTENANCE
See the Battery Storage and Battery Charging sections for storage and charging
procedures.
STORAGE AREA / COVERS
Be sure the storage area is well ventilated. Cover the vehicle with a genuine
POLARIS cover. Do not use plastic or coated materials. They do not allow
enough ventilation to prevent condensation, and may promote corrosion and
oxidation.
116
MAINTENANCE
TRANSPORTING THE ATV
Follow these procedures when transporting the vehicle.
1. Stop the engine.
2. Place the transmission in PARK.
3. Lock the parking brake.
4. Secure the fuel cap, oil cap and seats.
5. Always tie the frame of the ATV to the transporting unit securely with suitable
straps or rope. Do not attach tie straps to the front A- arm bolt pockets, racks
or handlebars.
6. Remove the key to prevent loss during transporting.
117
118
SPECIFICATIONS
SPECIFICATIONS
SCRAMBLER 850
SCRAMBLER 850
Maximum Weight Capacity
290 lbs. (131 kg) (includes operator, cargo and
accessories)
Dry Weight
740 lbs. (335.7 kg) (XP)
750 lbs. (340.2 kg) (XP EPS)
Fuel Capacity
5.25 gal. (20 l)
Engine Oil Capacity
2 qts. (1.9 l)
Coolant Capacity
2 qts. (1.9 l)
Rear Gearcase Oil Capacity
7.1 oz. (210 ml)
Demand Drive Fluid Capacity
9.3 oz. (275 ml)
Transmission Oil Capacity
37 oz. (1100 ml)
Front Rack/Storage Box Capacity
25 lbs. (11.3 kg)
Rear Rack Capacity
50 lbs. (22.7 kg)
Receiver Hitch Tongue Capacity
150 lbs. (68 kg) (Rear rack load and tongue
weight not to exceed 240 lbs. /109 kg)
Hitch Towing Rating
1500 lbs. (680.4 kg)
Unbraked Trailer Towing Capacity*
1914 lbs. (868 kg)
Overall Length
82.5 in. (209.5 cm)
Overall Width
48 in. (122 cm)
Overall Height
49.5 in. (125.7 cm)
Wheelbase
53 in. (134.6 cm)
Ground Clearance
10.6 in. (27 cm)
Minimum Turning Radius
84 in. (213 cm) unloaded
Engine
EHO850LE
Displacement
850 cc
Bore x Stroke
87 x 71.5
Alternator Output
475w @1200 RPM/Peak 630w
119
SPECIFICATIONS
SCRAMBLER 850
Compression Ratio
11:1
Starting System
Electric
Ignition System
Electronic Fuel Injection
Ignition Timing
6° +/- 5° BTDC @ 1200 RPM, Engine warm
Idle RPM
1200 +/- 50
Throttle Body/Size
Mikuni Dual Bore/42 mm
Spark Plug Type / Gap
REA6MC / .035 in. (0.9 mm)
Lubrication System
Wet Sump
Driving System Type
Automatic PVT (POLARIS Variable
Transmission)
Front Suspension
Dual a-arm with 9.2" (23 cm) travel
Rear Suspension
Progressive rate with 10.2" (26 cm) travel
Transmission
H/L/N/R/P
Gear Reduction, Low
5.034:1
Gear Reduction, Reverse
4.508:1
Gear Reduction, High
2.367:1
Drive Ratio, Front
3.818:1
Drive Ratio, Rear
3.7:1
Tires/Pressure, Front
26x8-14 / 7 psi (48.3 kPa)
Tires/Pressure, Rear
26x10-14 / 7 psi (48.3 kPa)
Brakes, Front/Rear
Single-Control Hydraulic Disc, All Wheel
Brakes, Auxiliary
Foot-Activated Hydraulic Disc, Rear Wheel
Brake, Parking
Hydraulic lock, all wheel
Headlight
Hi/Lo Beam on Bumper (50 watt)
Taillights
LED
Instrument Cluster
Digital/Analog
120
SPECIFICATIONS
CLUTCHING
SHIFT
WEIGHT
DRIVE
CLUTCH
SPRING
DRIVEN
CLUTCH
SPRING
HELIX
0-1800
(0-6000)
23-60
PN 5142260
Purple
PN 7043805
140-240
PN 7045111
62SR PT
PN 3236444
1800-3700
(6000-12000)
23-50
PN 5632395
Purple
PN 7043805
140-240
PN 7045111
62SR PT
PN 3236444
ALTITUDE
Meters (Feet)
121
122
POLARIS PRODUCTS
POLARIS PRODUCTS
LUBRICANTS / SERVICE PRODUCTS
PRODUCT
SIZE (QUANTITY)
PART NUMBER
12 oz aerosol (12)
2870791
1 qt (12)
2871517
1 qt (12)
2876244
2 qt (8)
2877490
Fogging Oil
PS-4
PS-4 Extreme Duty
1 gal (4)
2876245
1 qt (12)
2878920
2 qt (8)
2878922
1 gal (4)
2878919
1 qt (12)
2878068
1 gal (4)
2878069
AGL
Pump for Gallon Jug
3.8 l
2870465
1 qt (12)
2877922
2.5 gal (2)
2877923
1 qt (12)
2880514
1 gal (6)
2880513
—
2871312
Four 3 oz packs (6)
2871322
14 oz cartridge
2871423
—
2871460
Demand Drive
Antifreeze / Coolant
Grease Gun Kit, Premium All
Season
All Season Grease
Premium Starter Grease
3 oz tube (24)
2871515
14 oz cartridge
2871551
Dielectric Grease (Nyogel™)
—
2871329
Carbon Clean
12 oz bottle (12)
2871326
16 oz (12)
2870652
2.5 gal (2)
2872280
U-Joint Grease
Fuel Stabilizer
DOT 4 Brake Fluid
—
2872189
Loctite™ 565 Thread Sealant
—
2871956
POLARIS Battery Tender™
Charger
—
2859044
123
124
TROUBLESHOOTING
TROUBLESHOOTING
DRIVE BELT WEAR/BURN
POSSIBLE CAUSE
SOLUTION
Driving onto a pickup or tall
trailer in high range
Use low range during loading.
Starting out going up a steep
incline
Use low range.
Driving at low RPM or ground
speed (3-7 MPH)
Drive at a higher speed or use low range more frequently.
Insufficient warm-up at low
ambient temperatures
Warm the engine at least 5 minutes. With the transmission in
neutral, advance the throttle to about 1/8 throttle in short bursts, 5
to 7 times. The belt will become more flexible and prevent belt
burning.
Slow/easy clutch engagement
Use the throttle quickly and effectively.
Towing/pushing at low RPM/
low ground speed
Use low range only.
Utility use/plowing
Use low range only.
Shift the transmission to low range and carefully use fast,
aggressive throttle application to engage clutch.
Stuck in mud or snow
WARNING: Excessive throttle may cause loss of control and
vehicle rollover.
Climbing over large objects
from a stopped position
Shift the transmission to low range and carefully use fast, brief,
aggressive throttle application to engage clutch.
WARNING: Excessive throttle may cause loss of control and
vehicle rollover.
Belt slippage from water or
snow ingestion into the PVT
system
Dry out the PVT. Prevent water from entering the PVT intake duct.
See Intake Pre-Filters for more information. Inspect clutch seals
for damage if repeated leaking occurs.
Clutch malfunction
Your dealer can assist.
Poor engine performance
Check for fouled plug or foreign material in gas tank or fuel lines.
Your POLARIS dealer can assist.
Slippage from failure to warm
up belt
Always warm up the belt by operating below 30 mph for one mile
(5 miles or more when temperature is below freezing).
Wrong or missing belt
Install the recommended belt.
Improper break-in
Always break in a new belt and/or clutch.
125
TROUBLESHOOTING
ENGINE DOESN'T TURN OVER
POSSIBLE CAUSE
SOLUTION
Low battery voltage
Recharge the battery to 12.8 VDC
Loose battery connections
Check all connections and tighten
Loose solenoid connections
Check all connections and tighten
Loose electronic control box
connections
Inspect, clean, reinstall connectors
ENGINE TURNS OVER, FAILS TO START
POSSIBLE CAUSE
SOLUTION
Out of fuel
Refuel
Water is present in fuel
Drain the fuel system and refuel
Old or nonrecommended fuel
Replace with fresh recommended fuel
Fouled or defective
spark plug
Inspect plug and replace if necessary
No spark to spark plug
Inspect plug and replace if necessary
Water or fuel in
crankcase
Your authorized dealer can assist
Low battery voltage
Recharge the battery to 12.8 VDC
Mechanical failure
Your authorized dealer can assist
ENGINE BACKFIRES
POSSIBLE CAUSE
SOLUTION
Weak spark from spark
plug
Inspect, clean and/or replace spark plug
Incorrect spark plug gap
or heat range
Set gap to specs or replace plug
Old or nonrecommended fuel
Replace with fresh recommended fuel
Incorrectly installed
spark plug wires
Your authorized dealer can assist
126
TROUBLESHOOTING
POSSIBLE CAUSE
SOLUTION
Mechanical failure
Your authorized dealer can assist
Loose ignition
connections
Check all connections and tighten
Water present in fuel
Replace with fresh recommended fuel
ENGINE PINGS OR KNOCKS
POSSIBLE CAUSE
SOLUTION
Poor quality or low octane fuel
Replace with recommended fuel
Incorrect spark plug gap or
heat range
Set gap to specs or replace plug
ENGINE RUNS IRREGULARLY, STALLS OR MISFIRES
POSSIBLE CAUSE
SOLUTION
Fouled or defective spark plug
Inspect, clean and/or replace spark plug
Worn or defective spark plug
wires
Your authorized dealer can assist
Incorrect spark plug gap or
heat range
Set gap to specs or replace plug
Loose ignition connections
Check all connections and tighten
Water present in fuel
Replace with new fuel
Low battery voltage
Recharge battery to 12.8 VDC
Incorrect fuel
Replace with recommended fuel
Clogged air filter
Inspect and clean or replace
Clogged intake pre-filter
Inspect and clean (with soapy water) or replace
Other mechanical failure
Your authorized dealer can assist
ENGINE STOPS OR LOSES POWER
POSSIBLE CAUSE
SOLUTION
Out of fuel
Refuel
Kinked or plugged fuel vent
line
Inspect and replace
Water is present in fuel
Replace with new fuel
127
TROUBLESHOOTING
POSSIBLE CAUSE
SOLUTION
Fouled or defective spark plug
Inspect, clean and/or replace spark plug
Worn or defective spark plug
wires
Your authorized dealer can assist
Incorrect spark plug gap or
heat range
Set gap to specs or replace plug
Loose ignition connections
Check all connections and tighten
Low battery voltage
Recharge the battery to 12.8 VDC
Incorrect fuel
Replace with fresh recommended fuel
Clogged air filter
Inspect and clean or replace
Clogged intake pre-filter
Inspect and clean (with soapy water) or replace
Other mechanical failure
Your authorized dealer can assist
Overheated engine
Clean radiator screen and core, clean engine exterior. Your
dealer can assist.
128
WARRANTY
WARRANTY
LIMITED WARRANTY
POLARIS Industries Inc., 2100 Highway 55, Medina, MN 55340 (POLARIS)
gives a SIX MONTH LIMITED WARRANTY on all components of your POLARIS
vehicle against defects in material or workmanship. POLARIS further warrants
that the spark arrester in this product will meet the efficiency requirements of
USFS standard 5100-1C for at least 1000 hours when subjected to normal use
and when maintenance and installation are in accordance with POLARIS
recommendations.
This warranty covers parts and labor charges for repair or replacement of
defective parts and begins on the date of purchase by the original retail
purchaser. This warranty is transferable to another owner during the warranty
period through a POLARIS dealer, or other qualified person, but any such
transfer will not extend the original term of the warranty. The duration of this
warranty may vary by international region based upon local laws and
regulations.
REGISTRATION
At the time of sale, the Warranty Registration Form must be completed by your
dealer and submitted to POLARIS within ten days of purchase. Upon receipt of
this registration, POLARIS will record the registration for warranty. No
verification of registration will be sent to the purchaser as the copy of the
Warranty Registration Form will be your proof of warranty coverage. If you have
not signed the original registration and received the customer copy, please
contact your dealer immediately. NO WARRANTY COVERAGE WILL BE
ALLOWED UNLESS YOUR VEHICLE IS REGISTERED WITH POLARIS. Initial
dealer preparation and set-up of your vehicle is very important in ensuring
trouble-free operation. Purchasing a machine in the crate or without proper
dealer set-up will void your warranty coverage.
129
WARRANTY
WARRANTY COVERAGE AND EXCLUSIONS
LIMITATIONS OF WARRANTIES AND REMEDIES
This POLARIS limited warranty excludes any failures that are not caused by a
defect in material or workmanship. THIS WARRANTY DOES NOT COVER
CLAIMS OF DEFECTIVE DESIGN. This warranty also does not cover acts of
God, accidental damage, normal wear and tear, abuse or improper handling.
This warranty also does not cover any vehicle, component, or part that has been
altered structurally, modified, neglected, improperly maintained or used for
racing, competition or purposes other than for which it was designed.
This warranty excludes damages or failures resulting from improper lubrication;
improper engine timing; improper fuel; surface imperfections caused by external
stress, heat, cold or contamination; operator error or abuse; improper
component alignment, tension, adjustment or altitude compensation; snow,
water, dirt or other foreign substance ingestion/contamination; improper
maintenance; modified components; use of aftermarket or unapproved
components, accessories, or attachments; use of unapproved software or
calibration; unauthorized repairs; or repairs made after the warranty period
expires or by an unauthorized repair center.
This warranty excludes damages or failures caused by abuse, accident, fire, or
any other cause other than a defect in materials or workmanship and provides
no coverage for consumable components, general wear items, or any parts
exposed to friction surfaces, stresses, environmental conditions and/or
contamination for which they were not designed or not intended, including but
not limited to the following items:
•
•
•
•
•
•
•
•
•
•
•
Wheels and tires
Suspension components
Brake components
Seat components
Clutches and components
Steering components
Batteries
Light bulbs/Sealed beam lamps
Filters
Lubricants
Bushings
130
• Finished and unfinished surfaces
• Carburetor/Throttle body
components
• Engine components
• Drive belts
• Hydraulic components and fluids
• Circuit breakers/Fuses
• Electronic components
• Spark plugs
• Sealants
• Coolants
• Bearings
WARRANTY
LUBRICANTS AND FLUIDS
1. Mixing oil brands or using non-recommended oil may cause engine damage.
We recommend the use of POLARIS engine oil.
2. Damage or failure resulting from the use of non-recommended lubricants or
fluids is not covered by this warranty.
This warranty provides no coverage for personal loss or expense, including
mileage, transportation costs, hotels, meals, shipping or handling fees, product
pick-up or delivery, replacement rentals, loss of product use, loss of profits, or
loss of vacation or personal time.
THE EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY SHALL BE,
AT POLARIS' OPTION, REPAIR OR REPLACEMENT OF ANY DEFECTIVE
MATERIALS, COMPONENTS, OR PRODUCTS. THE REMEDIES SET FORTH
IN THIS WARRANTY ARE THE ONLY REMEDIES AVAILABLE TO ANY
PERSON FOR BREACH OF THIS WARRANTY. POLARIS SHALL HAVE NO
LIABILITY TO ANY PERSON FOR INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF
EXPRESS OR IMPLIED WARRANTY OR ANY OTHER CONTRACT,
NEGLIGENCE, OR OTHER TORT OR OTHERWISE. THIS EXCLUSION OF
CONSEQUENTIAL, INCIDENTAL, AND SPECIAL DAMAGES IS
INDEPENDENT FROM AND SHALL SURVIVE ANY FINDING THAT THE
EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL PURPOSE.
THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS
EXCLUDED FROM THIS LIMITED WARRANTY. ALL OTHER IMPLIED
WARRANTIES (INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTY OF MERCHANTABILITY) ARE LIMITED IN DURATION TO THE
ABOVE SIX MONTH WARRANTY PERIOD. POLARIS DISCLAIMS ALL
EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. SOME STATES
DO NOT PERMIT THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR ALLOW LIMITATIONS ON THE DURATION
OF IMPLIED WARRANTIES, SO THE ABOVE LIMITATIONS MAY NOT APPLY
TO YOU IF INCONSISTENT WITH CONTROLLING STATE LAW.
131
WARRANTY
HOW TO OBTAIN WARRANTY SERVICE
If your vehicle requires warranty service, you must take it to a POLARIS
Servicing Dealer. When requesting warranty service you must present your copy
of the Warranty Registration Form to the dealer. (THE COST OF
TRANSPORTATION TO AND FROM THE DEALER IS YOUR
RESPONSIBILITY.) POLARIS suggests that you use your original selling dealer;
however, you may use any POLARIS Servicing Dealer to perform warranty
service.
IN THE COUNTRY WHERE YOUR PRODUCT WAS
PURCHASED:
Warranty or Service Bulletin repairs must be done by an authorized POLARIS
dealer, or other qualified person. If you move or are traveling within the country
where your product was purchased, Warranty and Service Bulletin repairs may
be requested from any authorized POLARIS dealer, or other qualified person,
that sells the same line as your product.
OUTSIDE THE COUNTRY WHERE YOUR PRODUCT WAS
PURCHASED:
If you are traveling temporarily outside the country where your product was
purchased, you should take your product to an authorized POLARIS dealer, or
other qualified person. You must show the dealer photo identification from the
country of the selling dealer's authorized location as proof of residence. Upon
residence verification, the servicing dealer will be authorized to perform the
warranty repair.
IF YOU MOVE:
If you move to another country, be sure to contact POLARIS Customer
Assistance and the customs department of the destination country before you
move. Product importation rules vary considerably from country to country. You
may be required to present documentation of your move to POLARIS in order to
continue your warranty coverage. You may also be required to obtain
documentation from POLARIS in order to register your product in your new
country. You should warranty register your product at a local POLARIS dealer in
your new country immediately after you move to continue your warranty
coverage and to ensure that you receive information and notices regarding your
vehicle.
IF YOU PURCHASE FROM A PRIVATE PARTY:
If you purchase a POLARIS product from a private party, to be kept and used
outside of the country in which the product was originally purchased, all warranty
coverage will be denied. You must nonetheless register your product under your
name and address with a local POLARIS dealer in your country to ensure that
you receive safety information and notices regarding your product.
132
WARRANTY
EXPORTED PRODUCTS
EXCEPT WHERE SPECIFICALLY REQUIRED BY LAW, THERE IS NO
WARRANTY OR SERVICE BULLETIN COVERAGE ON THIS PRODUCT IF IT
IS SOLD OUTSIDE THE COUNTRY OF THE SELLING DEALER'S
AUTHORIZED LOCATION. This policy does not apply to products that have
received authorization for export from POLARIS. Dealers may not give
authorization for export. You should consult an authorized dealer to determine
this product's warranty or service coverage if you have any questions. This
policy does not apply to products registered to government officials or military
personnel on assignment outside the country of the selling dealer's authorized
location. This policy does not apply to Safety Bulletins.
NOTICE
If your product is registered outside of the country where it was purchased and
you have not followed the procedure set above, your product will no longer be
eligible for warranty or service bulletin coverage of any kind, other than safety
bulletins. Products registered to government officials or military personnel on
assignment outside of the country where the product was purchased will
continue to be covered by the Limited Warranty.
Please work with your dealer to resolve any warranty issues. Should your dealer
require any additional assistance, they will contact the appropriate person at
POLARIS.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state or in different countries. If any of the above terms
are void because of federal, state, local law, all other warranty terms will remain
in effect.
For questions call POLARIS Customer Assistance:
United States & Canada: 1-800-POLARIS (1-800-765-2747)
French: 1-800-268-6334
133
WARRANTY
U.S.A. EPA EMISSIONS LIMITED WARRANTY
This emissions limited warranty is in addition to the POLARIS standard limited
warranty for your vehicle. POLARIS Industries Inc. warrants that at the time it is
first purchased, this emissions-certified vehicle is designed, built and equipped
so it conforms with applicable U.S. Environmental Protection Agency emission
regulations. POLARIS warrants that the vehicle is free from defects in materials
and workmanship that would cause it to fail to meet these regulations.
The warranty period for off road vehicles 100cc or greater emissions-certified
vehicles starts on the date of purchase by original retail purchaser and continues
for a period of 500 hours of engine operation, 5000 kilometers (3100 miles) of
vehicle travel, or 30 calendar months from the date of purchase, whichever
comes first. The warranty period for ATVs less than 100cc emissions-certified
vehicles starts on the date of purchase by original retail purchaser and continues
for a period of 250 hours of engine operation, 2500 kilometers (1550 miles) of
vehicle travel, or 30 calendar months from the date of purchase, whichever
comes first. This EPA emissions warranty period is extended for at least as long
as the standard factory warranty that Polaris provides on the vehicle as a whole.
The EPA emissions warranty period does not further extend if you purchase
additional warranty coverage in the form of a service contract or other paid
warranty extension, but emission-related parts may be covered subject to the
terms of any such paid service contract or paid warranty extension.
This emissions limited warranty covers components whose failure increases the
vehicle's regulated emissions, and it covers components of systems whose only
purpose is to control emissions. Repairing or replacing other components not
covered by this warranty is the responsibility of the vehicle owner. This
emissions limited warranty does not cover components whose failure does not
increase the vehicle's regulated emissions.
For exhaust emissions, emission-related components include any engine parts
related to the following systems:
• Air-induction system
• Fuel system
• Ignition system
• Exhaust gas recirculation systems
The following parts are also considered emission-related components for
exhaust emissions:
• Aftertreatment devices
• Crankcase ventilation valves
134
• Sensors
• Electronic control units
WARRANTY
The following parts are considered emission-related components for evaporative
emissions:
•
•
•
•
•
•
•
•
•
Fuel Tank
Fuel Cap
Fuel Line
Fuel Line Fittings
Clamps*
Pressure Relief Valves*
Control Valves*
Control Solenoids*
Electronic Controls*
•
•
•
•
•
•
•
•
•
Vacuum Control Diaphragms*
Control Cables*
Control Linkages*
Purge Valves
Vapor Hoses
Liquid/Vapor Separator
Carbon Canister
Canister Mounting Brackets
Carburetor Purge Port Connector
*As related to the evaporative emission control system.
Emission-related components also include any other part whose only purpose is
to reduce emissions or whose failure will increase emissions without significantly
degrading engine/equipment performance. The exclusive remedy for breach of
this limited warranty shall be, at the exclusive option of POLARIS, repair or
replacement of any defective materials, components or products. THE
REMEDIES SET FORTH IN THIS LIMITED WARRANTY ARE THE ONLY
REMEDIES AVAILABLE TO ANY PERSON FOR BREACH OF THIS
WARRANTY. POLARIS SHALL HAVE NO LIABILITY TO ANY PERSON FOR
INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY
DESCRIPTION, WHETHER ARISING OUT OF EXPRESS OR IMPLIED
WARRANTY OR ANY OTHER CONTRACT, NEGLIGENCE OR OTHER TORT
OR OTHERWISE. THIS EXCLUSION OF CONSEQUENTIAL, INCIDENTAL,
AND SPECIAL DAMAGES IS INDEPENDENT FROM AND SHALL SURVIVE
ANY FINDING THAT THE EXCLUSIVE REMEDY FAILED OF ITS ESSENTIAL
PURPOSE.
ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD DESCRIBED HEREIN. POLARIS DISCLAIMS ALL EXPRESS
WARRANTIES NOT STATED IN THIS WARRANTY. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may
not apply if it is inconsistent with the controlling state law.
This limited warranty excludes failures not caused by a defect in material or
workmanship. This limited warranty does not cover damage due to accidents,
abuse or improper handling, maintenance or use. This limited warranty also
does not cover any engine that has been structurally altered, or when the vehicle
has been used in racing competition. This limited warranty also does not cover
physical damage, corrosion or defects caused by fire, explosions or other similar
causes beyond the control of POLARIS.
135
WARRANTY
Owners are responsible for performing the scheduled maintenance identified in
the owner's manual. POLARIS may deny warranty claims for failures that have
been caused by the owner's or operator's improper maintenance or use, by
accidents for which POLARIS has no responsibility, or by acts of God.
Any qualified repair shop or person may maintain, replace, or repair the
emission control devices or systems on your vehicle. An authorized POLARIS
dealer, or other qualified person, can perform any service that may be necessary
for your vehicle. POLARIS also recommends POLARIS parts, however
equivalent parts may be used for such service. It is a potential violation of the
Clean Air Act if a part supplied by an aftermarket parts manufacturer reduces the
effectiveness of the vehicle's emission controls. Tampering with emission
controls is prohibited by federal law.
CALIFORNIA RESIDENTS
Certain POLARIS Off-Road Vehicles are available in 49-state and 50-state
versions. Only the 50-state models are certified for sale in California. The 50state models available for sale in California are identified by the letter “B” in the
ninth position of the model number (e.g., R16RTE87B). The POLARIS 50-state
models are designed and built with features such as a reduced cargo box
capacity. Any modifications to these features may be a violation of the applicable
California regulations and may void this limited emissions warranty offered by
the manufacturer.
If you have any questions regarding your warranty rights and responsibilities,
please contact POLARIS Customer Assistance:
United States & Canada: 1-800-POLARIS (1-800-765-2747)
French: 1-800-268-6334
136
MAINTENANCE LOG
MAINTENANCE LOG
MAINTENANCE LOG
Use the following chart to record periodic maintenance.
DATE
MILES (KM)
OR HOURS
TECHNICIAN
SERVICE PERFORMED /
COMMENTS
137
138
2X4 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4X4 (AWD) Warning . . . . . . . . . . . . . . . . . . . 24
4X4 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4x4 Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
A
Age 16 Warning . . . . . . . . . . . . . . . . . . . . . . . . 25
Age Restrictions . . . . . . . . . . . . . . . . . . . . . . . . 13
Air Filter / Air Box. . . . . . . . . . . . . . . . . . . . . . 115
Air Filter Installation . . . . . . . . . . . . . . . . . 102
All Wheel Drive System. . . . . . . . . . . . . . . 36
Automatic Transmission Gear
Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Auxiliary Foot Brake . . . . . . . . . . . . . . 33, 98
B
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Battery Charging . . . . . . . . . . . . . . . . . . . . . . 111
Battery Installation . . . . . . . . . . . . . . . . . . . . 110
Battery Maintenance . . . . . . . . . . . . . . . . . 116
Battery Removal. . . . . . . . . . . . . . . . . . . . . . . 110
Battery Storage . . . . . . . . . . . . . . . . . . . . . . . . 111
Belt Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Boots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Brake Fluid Level. . . . . . . . . . . . . . . . . . . . . . . 33
Brake Lever. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Brake System Break-in . . . . . . . . . . . . . . . 56
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
C
Camber and Caster. . . . . . . . . . . . . . . . . . . 112
Cargo Warning. . . . . . . . . . . . . . . . . . . . . . . . . . 70
Clean the Exterior . . . . . . . . . . . . . . . . . . . . . 115
Cleaning and Storage . . . . . . . . . . . . . . . . 113
Clothing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Clutch Cover Warning. . . . . . . . . . . . . . . . . 25
Cold Weather Operation. . . . . . . . . . . . . . 60
Cooling System. . . . . . . . . . . . . . . . . . . . . . . . . 96
Crankcase Emission Control
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Crossing Hillsides . . . . . . . . . . . . . . . . . . . . . . 16
D
Descending Hills Improperly . . . . . . . . 16
Diagnostic Display Code
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Digital Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Discretionary Warning . . . . . . . . . . . . . . . . 24
Drive Belt Wear/Burn. . . . . . . . . . . . . . . . 125
Driving in Reverse . . . . . . . . . . . . . . . . . . . . . 67
Driving on a Sidehill (Sidehilling) . . . 64
Driving on Slippery Surfaces . . . . . . . . 61
Driving Over Obstacles . . . . . . . . . . . . . . . 66
Driving Through Water. . . . . . . . . . . . . . . . 65
Driving Uphill . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
E
Electromagnetic Interference . . . . . . . 83
Electronic Power Steering (EPS). . . 36
Emissions Limited Warranty. . . . . . . 134
Engaging 4X4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Engine and Drivetrain Break-in . . . . . 56
Engine Backfires . . . . . . . . . . . . . . . . . . . . . 126
Engine Doesn't Turn Over . . . . . . . . . 126
Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Engine Pings or Knocks . . . . . . . . . . . . 127
Engine Runs Irregularly, Stalls
or Misfires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Engine Stop Switch . . . . . . . . . . . . . . . . . . . . 28
Engine Stopping. . . . . . . . . . . . . . . . . . . . . . . . 68
Engine Stops or Loses Power . . . . 127
Engine Turns Over, Fails to
Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
European Vibration and Noise . . . . . . . . 9
Exhaust Emission Control
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Exported Products . . . . . . . . . . . . . . . . . . . 133
Exposure to Exhaust . . . . . . . . . . . . . . . . . . 14
Eye Protection . . . . . . . . . . . . . . . . . . . . . . . . . . 12
F
Failure to Inspect Before
Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fluid Levels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Fluid Part Numbers . . . . . . . . . . . . . . . . . . 123
139
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Service Hours . . . . . . . . . . . . . . . . . . . . . . . . 48
Unit Selection Distance . . . . . . . . . . . . 43
Unit Selection Temperature. . . . . . . 44
Fog the Engine . . . . . . . . . . . . . . . . . . . . . . . . 116
Front Compartment. . . . . . . . . . . . . . . . . . . . 35
Front Gearcase (Demand
Drive) Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Front Wheel Hub Tightening . . . . . . . . 99
Front/Rear Shock Compression . . . 112
Fuel Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Fuel Stabilizer. . . . . . . . . . . . . . . . . . . . . . . . . . 115
Fuse Replacement. . . . . . . . . . . . . . . . . . . 102
Jumps and Stunts . . . . . . . . . . . . . . . . . . . . . . 16
G
K
General Warning . . . . . . . . . . . . . . . . . . . . . . . 23
Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Know Your Riding Area/Tread
Lightly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
J
H
L
Hand Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Handlebars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Handling Gasoline . . . . . . . . . . . . . . . . . . . . . 14
Hauling Cargo. . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Headlamp Replacement. . . . . . . . . . . . 104
Headlight Beam Adjustment. . . . . . . 104
Headlight Switch . . . . . . . . . . . . . . . . . . . . . . . 28
Helmet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
High Beam Adjustment . . . . . . . . . . . . . 103
Hot Exhaust Systems . . . . . . . . . . . . . . . . . 20
How To Obtain Warranty
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Limited Warranty . . . . . . . . . . . . . . . . . . . . . 129
Lubricants / Service Products . . . . . 123
Lubrication Guide . . . . . . . . . . . . . . . . . . . . . . 89
I
Ignition Switch/Light Switch . . . . . . . . . 27
Improper Cargo Loading . . . . . . . . . . . . . 19
Improper Hill Climbing . . . . . . . . . . . . . . . . 16
Inspect and Lubricate . . . . . . . . . . . . . . . . 115
Instrument Cluster
Back Light Color . . . . . . . . . . . . . . . . . . . . . 46
Back Light Level . . . . . . . . . . . . . . . . . . . . . 47
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Diagnostic Code. . . . . . . . . . . . . . . . . . . . . 49
Display Area 1 . . . . . . . . . . . . . . . . . . . . . . . 40
Display Area 2 . . . . . . . . . . . . . . . . . . . . . . . 41
Indicator Lamps . . . . . . . . . . . . . . . . . . . . . 38
Options Menu . . . . . . . . . . . . . . . . . . . . . . . . 42
140
M
Maintenance Interval Chart . . . . . . . . . . 86
Maintenance Log. . . . . . . . . . . . . . . . . . . . . 137
Maintenance, Periodic . . . . . . . . . . . . . . . . 85
Master Cylinder/Brake Fluid . . . . . . . . . 32
Mode/Reverse Override Switch . . . . 28
Modifications to Vehicle . . . . . . . . . . . . . . 21
N
New Operator Driving
Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
“No Passenger” Warning . . . . . . . . . . . . . 24
Noise Emission Control System . . . . 83
O
Oil and Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Oil and Filter Change. . . . . . . . . . . . . . . . . . 91
Oil Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Oil Recommendations . . . . . . . . . . . . . . . . 90
Operating at Excessive Speeds . . . . 15
Operating Improperly in Reverse. . . 18
Operating in Unfamiliar Terrain . . . . . 18
Operating on Frozen Bodies of
Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Operating on Pavement . . . . . . . . . . . . . . 14
Operating on Public Roads . . . . . . . . . . 15
Operating on Slippery Terrain . . . . . . . 18
Operating on Steep Hills . . . . . . . . . . . . . 16
Operating Over Obstacles . . . . . . . . . . . 18
Operating Through Water . . . . . . . . . . . . 19
Operation on Public Lands in
the U.S.A.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
P
Parking Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Parking on an Incline . . . . . . . . . . . . . . . . . . 68
Parking the Vehicle . . . . . . . . . . . . . . . . . . . . 69
Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 123
Periodic Maintenance Chart . . . . . . . . . 85
Physical Control of the Vehicle . . . . . 15
Physical Skills. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Polaris Products . . . . . . . . . . . . . . . . . . . . . . 123
Polishing the Vehicle . . . . . . . . . . . . . . . . . 114
Poor Visibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power Steering Unit (Cleaning). . . . . 96
Pre-Ride Checklist . . . . . . . . . . . . . . . . . . . . . 57
Protective Apparel . . . . . . . . . . . . . . . . . . . . . 14
PVT Break-in (Clutches/Belt) . . . . . . . 56
PVT Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
PVT System . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
R
Rack/Box Warning . . . . . . . . . . . . . . . . . . . . . 24
Radiator Coolant . . . . . . . . . . . . . . . . . . . . . . . 97
Rear Gearcase Oil . . . . . . . . . . . . . . . . . . . . . 95
Recovery Bottle Coolant . . . . . . . . . . . . . 96
Registration, Warranty . . . . . . . . . . . . . . 129
Reverse Override Warning . . . . . . . . . . 25
Safe Riding Gear . . . . . . . . . . . . . . . . . . . . . . . 11
Safety Labels and Locations . . . . . . . . 22
Safety Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety Training. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Safety Warnings . . . . . . . . . . . . . . . . . . . . . . . . 13
Safety, Winch Maintenance. . . . . . . . . . 82
Seat Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Shock Loading the Winch . . . . . . . . . . . . 81
Side Panel/Footwell Removal. . . . . . . 98
Signal Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Skidding or Sliding . . . . . . . . . . . . . . . . . . . . . 19
Spark Arrester . . . . . . . . . . . . . . . . . . . . . . . . 107
Spark Plug Inspection. . . . . . . . . . . . . . . 105
Spark Plug Recommendations . . . 104
Spark Plugs. . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Stabilize the Fuel . . . . . . . . . . . . . . . . . . . . . . 115
Stalling While Climbing a Hill . . . . . . . . 17
Starting the Engine . . . . . . . . . . . . . . . . . . . . 59
Steering Assembly. . . . . . . . . . . . . . . . . . . . . 96
Stopping the Engine . . . . . . . . . . . . . . . . . . . 68
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Storage Area . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
T
Taillight/Brakelight Lamp
Replacement . . . . . . . . . . . . . . . . . . . . . . . . 104
Throttle Body/Idle RPM . . . . . . . . . . . . . . 113
Throttle Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Tire Pressure/Load Warning. . . . . . . . . 24
Tire Tread Depth . . . . . . . . . . . . . . . . . . . . . . . 99
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Toe Alignment. . . . . . . . . . . . . . . . . . . . . . . . . 101
Towing Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Trail Etiquette . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Transmission Oil. . . . . . . . . . . . . . . . . . . . . . . . 93
Transporting the ATV. . . . . . . . . . . . . . . . . 117
Turning Around on a Hill (KTurn) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Turning Improperly. . . . . . . . . . . . . . . . . . . . . 15
S
Safe Operation Practices . . . . . . . . . . . . 58
141
U
Unauthorized Use of the Vehicle . . . 20
V
Vehicle Break-in Period. . . . . . . . . . . . . . . 55
Vehicle Identification Numbers . . . . . . . 9
Vehicle Immersion . . . . . . . . . . . . . . . . . . . 106
W
Warning Symbols . . . . . . . . . . . . . . . . . . . . . . . . 8
Washing the Vehicle. . . . . . . . . . . . . . . . . . 113
Wet Fouled Plug. . . . . . . . . . . . . . . . . . . . . . 105
Wheel Installation . . . . . . . . . . . . . . . . . . . . 100
Wheel Nut Torque
Specifications. . . . . . . . . . . . . . . . . . . . . . . . 100
Wheel Removal. . . . . . . . . . . . . . . . . . . . . . . . . 99
Winch Cable Care . . . . . . . . . . . . . . . . . . . . . 80
Winch Maintenance and
Service Safety . . . . . . . . . . . . . . . . . . . . . . . . . 82
Winch Operation . . . . . . . . . . . . . . . . . . . . . . . 75
Winch Safety Precautions . . . . . . . . . . . 73
Winch Shock Loading . . . . . . . . . . . . . . . . . 81
142
WARNING
Improper vehicle use can result
in SEVERE INJURY or DEATH.
ALWAYS USE
AN APPROVED
HELMET AND
PROTECTIVE
GEAR FOR
DRIVER AND
PASSENGER
NEVER
USE ON
PUBLIC
ROADS
NEVER
CARRY
PASSENGERS
ON A
1-UP ATV
(TYPE I)
NEVER
CARRY MORE
THAN 1
PASSENGER
ON A 2-UP
ATV (TYPE II)
NEVER
USE WITH
DRUGS OR
ALCOHOL
NEVER operate:
• without proper ATV training or instruction.
• at speeds too fast for your skills or the conditions.
• on public roads - a collision can occur with another vehicle.
• (Type I / 1-Up ATV only) with a passenger – passengers affect balance
and steering and increase risk of losing control.
• (Type II / 2-Up ATV only) with a passenger unless passenger seat
is securely in place.
THE OPERATOR MUST ALWAYS:
• use proper riding techniques to avoid vehicle overturns on hills
and rough terrain and in turns.
• avoid paved surfaces - pavement may seriously affect handling
and control.
• (Type II / 2-Up ATV only) reduce speed and use extra caution at all times
when carrying a passenger – dismount passenger when conditions require.
• (Type II / 2-Up ATV only) make sure passenger reads and understands
all safety labels.
READ OWNER'S MANUAL.
FOLLOW ALL INSTRUCTIONS AND WARNINGS.
For your nearest Polaris dealer,
call 1-800-POLARIS (765-2747)
or visit www.polaris.com
Polaris Industries Inc.
2100 Highway 55
Medina, MN 55340
Part No. 9929559 Rev 01
Printed in USA
">