MSI Z170A GAMING PRO motherboard User guide
MSI Z170A GAMING PRO is an ATX motherboard compatible with 6th generation Intel® Core™ i7/i5/i3, Pentium® and Celeron® processors. It comes with the latest Intel® Z170 chipset. It supports DDR4 memory up to 3400+(OC) MHz. It features Turbo M.2, USB 3.1 Gen1, SATA 6Gbps, and Gigabit LAN. It also supports multi-GPU configurations with NVIDIA® SLI™ and AMD® CrossFire™. With its unique features and capabilities, MSI Z170A GAMING PRO is a perfect choice for gamers, overclockers, and enthusiasts.
Advertisement
Advertisement
Unpacking
Thank you for buying the MSI ® Z170A GAMING PRO motherboard. Check to make sure your motherboard box contains the following items. If something is missing, contact your dealer as soon as possible.
Motherboard
Drivers & Utilities
Disc
Motherboard User
Guide
I/O Shield SATA Cable SLI Bridge
Connector
Unpacking 1
Safety Information
● The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly.
● Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
● Hold the motherboard by the edges to avoid touching sensitive components.
● It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard.
● Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed.
● Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
● Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user.
● If you need help during any installation step, please consult a certified computer technician.
● Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
● Keep this user guide for future reference.
● Keep this motherboard away from humidity.
● Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet.
● Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
● All cautions and warnings on the motherboard should be noted.
● If any of the following situations arises, get the motherboard checked by service personnel:
▶ Liquid has penetrated into the computer.
▶ The motherboard has been exposed to moisture.
▶ The motherboard does not work well or you can not get it work according to user guide.
▶ The motherboard has been dropped and damaged.
▶ The motherboard has obvious sign of breakage.
● Do not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.
2 Safety Information
Quick Start
Preparing Tools and Components
Intel ® LGA 1151 CPU
CPU Fan Thermal Paste
DDR4 Memory
Chassis
Power Supply Unit
SATA DVD Drive SATA Hard Disk Drive Graphics Card
Phillips Screwdriver A Package of Screws
Quick Start 3
Installing a Processor
http://youtu.be/bf5La099urI
2
1
4 Quick Start
3
6
4
7
5
8
9
Installing DDR4 memory
http://youtu.be/T03aDrJPyQs
1
3
2
1
2
3
Quick Start 5
Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI
SW
RESET
POWER SW
HDD LED
POWER LED+
POWER LED-
2
1
JFP1
9
10
1
3
5
7
9
HDD LED +
HDD LED -
Reset Switch
Reset Switch
Reserved
2
4
6
8
10
Power LED +
Power LED -
Power Switch
Power Switch
No Pin
HDD LED
POWER LED
HDD LED -
HDD LED +
POWER LED -
POWER LED +
JFP1
6 Quick Start
Installing the Motherboard
1
2
Quick Start 7
Installing SATA Drives
http://youtu.be/RZsMpqxythc
1
2
3
5
4
8 Quick Start
Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
1
5
3
2
4
Quick Start 9
Connecting Peripheral Devices
10 Quick Start
Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4
JPWR1
JPWR2
Quick Start 11
Power On
2
3
4
1
12 Quick Start
Contents
PCI_E1~6, PCI1: PCIe/ PCI Expansion Slots.................................................... 29
SATA1~6: SATA 6Gb/s Connectors .................................................................. 31
CPUFAN1~2, SYSFAN1~3: Fan Connectors .................................................... 36
JBAT1: Clear CMOS (Reset BIOS) Jumper ...................................................... 38
Contents 13
EZ Debug LED: Debug LED indicators ............................................................ 38
Using Intel ® Rapid Storage Technology Option ROM ....................................... 81
14 Contents
Specifications
CPU
Chipset
Memory
Expansion Slots
Onboard Graphics
Multi-GPU
Storage
Supports 6th Gen Intel ® Core ™ i3/i5/i7 processors, and Intel ®
Pentium ® and Celeron ® processors for Socket LGA1151
Intel ® Z170 Express Chipset
● 4x DDR4 memory slots, support up to 64GB
▶ Supports DDR4 3600(OC)/ 3200(OC)/ 3000(OC)/
2800(OC)/ 2600(OC)/ 2400/ 2133 MHz
● Dual channel memory architecture
● Supports ECC, un-buffered memory
● Supports Intel ® Extreme Memory Profile (XMP)
● 3x PCIe 3.0 x16 slots (support x16/x0/x4 or x8/x8/x4 modes)
● 3x PCIe 3.0 x1 slots
● 1x PCI slot
● 1x HDMI ™ port, support a maximum resolution of
4096x2160@24Hz, 2560x1600@60Hz
● 1x DVI-D port, support a maximum resolution of
1920x1200@60Hz
● Supports 3-Way AMD ® CrossFire™ Technology
● Supports 2-Way NVIDIA ® SLI™ Technology
Intel ® Z170 Express Chipset
● 6x SATA 6Gb/s ports* (2 ports reserved for SATA Express port)
● 1x M.2 slot*
▶ Supports PCIe 3.0 x4 and SATA 6Gb/s standards,
4.2cm/ 6cm/ 8cm length M.2 SSD cards
▶ Supports PCIe 3.0 x4 NVMe Mini-SAS SSD with Turbo
U.2 Host Card**
● 1x SATAe port (PCIe 3.0 x2)*/ ***
● Supports Intel ®
Core ™
Smart Response Technology for Intel processors
* SATA5 and SATA6 ports will be unavailable when installing the M.2 module in M.2 slot. SATA and SATAe ports maximum support 6x SATAs or 1x
SATAe + 4x SATAs.
** The Turbo U.2 Host Card is not included, please purchase separately.
*** SATAe port is backward compatible with SATA.
Continued on next page
Specifications 15
RAID
USB
Audio
LAN
Back Panel
Connectors
Continued from previous page
Intel ® Z170 Express Chipset
● Supports RAID 0, RAID1, RAID 5 and RAID 10 for SATA storage devices
● ASMedia ® ASM1142 Chipset
▶ 2x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) ports on the back panel
● Intel ® Z170 Express Chipset
▶ 6x USB 3.1 Gen1 (SuperSpeed USB) ports (4 ports on the back panel, 2 ports available through the internal
USB 3.1 Gen1 connector)
▶ 6x USB 2.0 (High-speed USB) ports (2 ports on the back panel, 4 ports available through the internal USB 2.0 connectors)
● Realtek ® ALC1150 Codec
● 7.1-Channel High Definition Audio
● Supports S/PDIF output
1x Intel ® I219-V Gigabit LAN controller
● 1x PS/2 keyboard/ mouse port
● 2x USB 2.0 ports
● 1x DVI-D port
● 2x USB 3.1 Gen2 ports
● 4x USB 3.1 Gen1 ports
● 1x HDMI ™ port
● 1x LAN (RJ45) port
● 1x Optical S/PDIF OUT connector
● 5x OFC audio jacks
Continued on next page
16 Specifications
Internal Connectors
I/O Controller
Hardware Monitor
Form Factor
BIOS Features
Continued from previous page
● 1x 24-pin ATX main power connector
● 1x 8-pin ATX 12V power connector
● 6x SATA 6Gb/s connectors (2 ports reserved for SATA
Express port)
● 1x SATAe connector
● 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports)
● 1x USB 3.1 Gen1 connector (supports additional 2 USB
3.1 Gen1 ports)
● 2x 4-pin CPU fan connectors
● 3x 4-pin system fan connectors
● 1x Front panel audio connector
● 2x Front panel connectors
● 1x TPM module connector
● 1x Chassis Intrusion connector
● 1x Clear CMOS jumper
NUVOTON NCT6793 Controller Chip
● CPU/System temperature detection
● CPU/System fan speed detection
● CPU/System fan speed control
● ATX Form Factor
● 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
● 1x 128 Mb flash
● UEFI AMI BIOS
● ACPI 5.0, PnP 1.0a, SM BIOS 2.8
● Multi-language
Continued on next page
Specifications 17
Software
Continued from previous page
● Drivers
● COMMAND CENTER
● LIVE UPDATE 6
● FAST BOOT
● SUPER CHARGER
● GAMING APP
● M-CLOUD
● RAMDISK
● GAMING LAN MANAGER
● Open Broadcaster Software
● Intel ® Extreme Tuning Utility
● Norton ™ Internet Security Solution
● Google Chrome ™ ,Google Toolbar, Google Drive
● SteelSeries Engine 3
● CPU-Z
Continued on next page
18 Specifications
Performance
GAMING Features
Continued from previous page
● MYSTIC LIGHT
▶ 16.5 Million Colors
▶ 8 LED Effects
● AUDIO BOOST 3
▶ Isolated Audio PCB
▶ EMI Shielding
▶ Dual Headphone Amplifiers
▶ High Quality Audio Capacitors
▶ Golden Audio Connectors
● GAME BOOST
▶ Easy Overclocking
● GAMING LAN
▶ Intel I219-V Gigabit Ethernet
▶ MSI Network Manager
▶ Electric Wave Surge
● GAMING APP
▶ System Mode Switching: OC/Gaming/Silent
▶ Gaming Hotkey
▶ Gaming Mouse Master
▶ Gaming LED Control
● GAMING CERTIFIED
● Open Broadcaster Software
▶ Encoding using H264 (x264) and AAC.
▶ Support for Intel Quick Sync Video (QSV) and NVENC.
▶ Unlimited number of scenes and sources.
▶ Live RTMP streaming to Twitch, YouTube, DailyMotion,
Hitbox and more.
Continued on next page
Specifications 19
MSI Exclusive
Features
Specification
Highlights
Continued from previous page
● CLICK BIOS 5
▶ EZ Mode & Advanced Mode Switching
▶ Board Explorer
▶ Hardware Monitor
● MILITARY CLASS 5
▶ Military Class Component
▶ Military Class Stability and Reliability
ESD Protection
EMI Protection
Humidity Protection
Circuit Protection
High Temperature Protection
Steel Armor PCIe Slots
● COMMAND CENTER
▶ System Monitor
▶ Smart Fan Control
● RAMDISK
● LIVE UPDATE 6
● M-CLOUD
● CPU-Z
● EZ Debug LED
● DDR4 Boost Support
▶ Dual-Channel DDR4 Memory Support
▶ Isolated DDR4 Circuit Design
▶ DDR4 XMP Ready
● PCI Express 3.0 Support
▶ 2-Way Nvidia SLI TM Support
▶ 3-Way AMD CrossFire TM Support
● USB 3.1 Gen2 Ready
▶ USB 3.1 Gen2 (10 Gb/s) Type-A Ready
● Turbo M.2 Ready
▶ PCIe 3.0 x4 (32 Gb/s) Support
▶ PCIe / SATA Dual Mode Support
● SATA Express Support
● NVMe / AHCI Driver Support
● U.2 Support (Optional)
20 Specifications
Block Diagram
HDMI DVI-D
Dual Channel DDR4 Memory
PCI Express
Bus
CPU
DMI 3.0
1 x SATA Express
(2 x SATA 6Gb/s) x2
1 x M.2 x4
4 x SATA 6Gb/s
6 x USB 2.0
x1 x1 x1
PCIe x1
PCIe x1
PCIe x1
LPC Bus
NV6793
Super I/O
P/S2 Mouse / Keyboard
Z170
PCI Bus
PCI
PCI Express Bus x2
ASMEDIA
ASM1142
Realtek
ALC1150
Audio Jacks
Block Diagram 21
Rear I/O Panel
PS/2
USB 3.1 Gen2
USB 3.1 Gen1
LAN
Audio Ports
USB 2.0
DVI-D Optical S/PDIF-Out
USB 3.1 Gen1
LAN Port LED Status Table
Link/ Activity LED
Status Description
Off
Yellow
Blinking
No link
Linked
Data activity
Audio Ports Configuration
Speed LED
Status Description
Off
Green
Orange
10 Mbps connection
100 Mbps connection
1 Gbps connection
Audio Ports
Center/ Subwoofer Out
Rear Speaker Out
Line-In/ Side Speaker Out
●
Line-Out/ Front Speaker Out ●
Mic In
(●: connected, Blank : empty)
●
2
Channel
4 6 8
●
●
●
●
●
●
●
22 Rear I/O Panel
Realtek HD Audio Manager
After installing the Realtek HD Audio driver, the Realtek HD Audio Manager icon will appear in the system tray. Double click on this icon to launch.
Device
Selection Advanced
Settings
Jack Status
Application
Enhancement
Main Volume
Connector
Strings
Profiles
● Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
● Application Enhancement - the array of options will provide you a complete guidance of anticipated sound effect for both output and input device.
● Main Volume - controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar.
● Profiles - toggles between profiles.
● Advanced Settings - provides the mechanism to deal with 2 independent audio streams.
● Jack Status - depicts all render and capture devices currently connected with your computer.
● Connector Settings - configures the connection settings.
Auto popup dialog
When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.
Each jack corresponds to its default setting as shown on the next page.
Rear I/O Panel 23
Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
AUDIO INPUT
Audio jacks to 7.1-channel speakers diagram
AUDIO INPUT
Rear Front
Side Center/
Subwoofer
24 Rear I/O Panel
Overview of Components
JPWR2
SYSFAN1
DIMM1 DIMM3
DIMM2 DIMM4
CPUFAN1
CPU Socket
CPUFAN2
PCI_E1
PCI_E2
PCI_E3
PCI_E4
PCI_E5
PCI1
PCI_E6
JAUD1
SYSFAN2
JTBT1*
JFP2
JFP1
JUSB2
JTPM1
JUSB1
SE1_21
SYSFAN3
EZ Debug LED
JPWR1
JUSB3
M2_1
JBAT1
SATA6
SATA5
SATA3
SATA4
JCI1
* JTBT1 is used to connect a specific card.
Overview of Components 25
Component Contents
Port Name
DIMM1~4
Port Type
Clear CMOS (Reset BIOS) Jumper
Page
26 Overview of Components
CPU Socket
Introduction to the LGA 1151 CPU
The surface of the LGA 1151 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator.
Important
● Always unplug the power cord from the power outlet before installing or removing the CPU.
● Please retain the CPU protective cap after installing the processor. MSI will deal with Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.
● When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.
● Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
● Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
● Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.
● If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.
● This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI ® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.
Overview of Components 27
DIMM Slots
DIMM1 DIMM3
Channel A
DIMM2
Memory module installation recommendation
DIMM4
Channel B
DIMM2
DIMM4
DIMM2
DIMM4
DIMM3
DIMM2
DIMM1
Important
● Always insert memory modules in the DIMM2 slot first.
● Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.
● Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is suggested to protect the CPU.
● Please note that the maximum capacity of addressable memory is 4GB or less for 32-bit Windows OS due to the memory address limitation. Therefore, we recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
● Some memory may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the Memory Try It! to set the memory frequency if you want to operate the memory at the marked or at a higher frequency.
● It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.
● The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking.
28 Overview of Components
PCI_E1~6, PCI1: PCIe/ PCI Expansion Slots
PCI_E1 : PCIe 3.0 x1 slot
PCI_E2 : PCIe 3.0 x16 slot
PCI_E3 : PCIe 3.0 x1 slot
PCI_E4 : PCIe 3.0 x1 slot
PCI_E5 : PCIe 3.0 x8 slot
PCI1 : PCI slot
PCI_E6 : PCIe 3.0 x4 slot
Multiple graphics cards installation recommendation
x16 x8 x8 x8 x8 x4
Important
● For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E2 slot is recommended.
● When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.
Overview of Components 29
Installing SLI graphics cards
For power supply recommendations for SLI configurations, please refer to the user guide of your graphics card to make sure you meet all the system requirements.
To install SLI graphics cards:
1. Turn off your computer and disconnect the power cord, install two graphics cards into the PCI_E2 and PCI_E5 slots.
2. Connect the two cards together using the SLI Bridge Connector.
3. Connect all PCIe power connectors of the graphics cards.
4. Reconnect the power cord, power up the computer and install the drivers and software included in your graphics card package.
5. Right-click the Windows desktop and select NVIDIA Control Panel from the menu, click on Configure SLI, Surround, PhysX in the left task pane and select
Maximize 3D performance in the SLI configuration menu, and then click Apply .
30 Overview of Components
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.
SATA2
SATA1
SATA6
SATA5
SATA4
SATA3
SE1_21: SATAe Connector
This connector is SATAe (SATA Express) interface port. Each SATAe connector can be used with a single SATAe device or two legacy SATA devices.
SATA2
SATA1
SATAe connector
Important
● SATA5~6 ports will be unavailable when installing the M.2 module in M.2 slot.
● Please do not fold the SATA or SATAe cable at a 90-degree angle. Data loss may result during transmission otherwise.
● SATA or SATAe cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
Overview of Components 31
M2_1: M.2 Slot
Installing M.2 module
1. Remove the screw from the base screw.
2. Remove the base screw.
1
2
3. Tighten the base screw into the hole of the distance to the M.2 slot as the length your M.2 module.
4. Insert your M.2 module into the M.2 slot at a
30-degree angle.
3
Important
● SATA5~6 ports will be unavailable when installing the
M.2 module in M.2 slot.
● Intel ® RST only supports PCIe M.2 SSD with UEFI
ROM, does not support Legacy ROM.
Video Demonstration
Watch the video to learn how to Install
M.2 module.
http://youtu.be/JCTFABytrYA
30°
4
5. Put the screw in the notch on the trailing edge of your M.2 module and tighten it into the base screw.
5
32 Overview of Components
JPWR1~2: Power Connectors
These connectors allow you to connect an ATX power supply.
3
4
1
2
Ground
Ground
Ground
Ground
8
4
7
8
5
6
5
1
JPWR2
+12V
+12V
+12V
+12V
12
1
24
13
JPWR1
8
9
6
7
10
11
12
3
4
1
2
5
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PWR OK
5VSB
+12V
+12V
+3.3V
18
19
20
21
22
13
14
15
16
17
23
24
Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
+3.3V
-12V
Ground
PS-ON#
Ground
Ground
Ground
Res
+5V
+5V
+5V
Ground
Overview of Components 33
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
2 10
JFP1
1
7
9
3
5
1
HDD LED +
HDD LED -
Reset Switch
Reset Switch
Reserved
9
2
8
10
4
6
Power LED +
Power LED -
Power Switch
Power Switch
No Pin
1
JFP2
1
3
Speaker -
Buzzer -
2
4
JAUD1: Front Audio Connector
This connector allow you to connect audio jacks on the front panel.
2 10
Buzzer +
Speaker +
5
7
9
1
3
MIC L
MIC R
Head Phone R
SENSE_SEND
Head Phone L
1
6
8
10
2
4
9
Ground
NC
MIC Detection
No Pin
Head Phone Detection
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.
2 14
5
7
1
3
9
11
13
1
LPC Clock
LPC Reset
LPC address & data pin0
LPC address & data pin1
LPC address & data pin2
LPC address & data pin3
LPC Frame
13
6
8
2
4
10
12
14
3V Standby power
3.3V Power
Serial IRQ
5V Power
No Pin
Ground
Ground
34 Overview of Components
JUSB3: USB 3.1 Gen1 Connector
This connector allows you to connect USB 3.1 Gen1 ports on the front panel.
10 11
1 20
6
7
4
5
8
1
2
3
Power
USB3_RX_DN
USB3_RX_DP
Ground
USB3_TX_C_DN
USB3_TX_C_DP
Ground
USB2.0-
14
15
16
17
18
11
12
13
USB2.0+
USB2.0-
Ground
USB3_TX_C_DP
USB3_TX_C_DN
Ground
USB3_RX_DP
USB3_RX_DN
9
10
USB2.0+
Ground
19
20
Power
No Pin
Important
Note that the Power and Ground pins must be connected correctly to avoid possible damage.
JUSB1~2: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2 10
1
7
9
3
5
VCC
USB0-
USB0+
Ground
No Pin
1
2
8
10
4
6
9
VCC
USB1-
USB1+
Ground
NC
Important
● Note that the VCC and Ground pins must be connected correctly to avoid possible damage.
● In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI ® SUPER CHARGER utility.
Overview of Components 35
CPUFAN1~2, SYSFAN1~3: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode and
Voltage Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. Voltage Mode fan connectors control fan speed by changing voltage. Therefore, when you plug a 3-pin (Non-PWM) fan to a PWM Mode fan connector, the fan speed will be always maintained at 100%, and that could be noisy.
PWM Mode fan connector
1
3
Ground
Sense
1
CPUFAN1/ CPUFAN2
2
4
+12V
Speed Control Signal
Voltage Mode fan connector
1
1
3
1
SYSFAN3
Ground
Sense
2
4
SYSFAN1/ SYSFAN2
Voltage Control
NC
Controlling the fan speed
There are two ways to manage fan speed. One is to go to BIOS > HARDWARE
MONITOR . The other is to use COMMAND CENTER application.
BIOS > HARDWARE MONITOR COMMAND CENTER
Both methods offer gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.
36 Overview of Components
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Trigger the chassis intrusion event
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > Settings > Security > Chassis Intrusion Configuration .
4. Set Chassis Intrusion to Enabled .
5. Press F10 to save and exit and then press the Enter key to select Yes .
6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.
Resetting the chassis intrusion warning
1. Go to BIOS > Settings > Security > Chassis Intrusion Configuration .
2. Set Chassis Intrusion to Reset .
3. Press F10 to save and exit and then press the Enter key to select Yes .
Overview of Components 37
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumpers to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/
Reset BIOS
Resetting BIOS to default values
1. Power off the computer and unplug the power cord.
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.
EZ Debug LED: Debug LED indicators
These LEDs indicate the status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
38 Overview of Components
BIOS Setup
The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.
Important
● BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
● The pictures in this chapter are for reference only and may vary from the product you purchased.
Entering BIOS Setup
Please refer the following methods to enter BIOS setup.
● Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter
Boot Menu message appears on the screen during the boot process.
● Use MSI FAST BOOT application. Click on GO2BIOS button and choose OK . The system will reboot and enter BIOS setup directly.
Click on GO2BIOS
● Enable the GO2BIOS item ( SETTING > Boot > GO2BIOS ) in BIOS setup
Advanced mode (F7). It allows the system to enter BIOS setup directly by pressing the power button for 4 seconds upon bootup.
Function key
Key Function Key Function
F1 General Help F3
F4 Enter CPU Specifications menu F5
F6 Load optimized defaults F8
Enter Favorites menu
Enter Memory-Z menu
Load Overclocking Profile
F9 Save Overclocking Profile F10 Save Change and Reset*
* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.
BIOS Setup 39
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS:
● Go to BIOS and press F6 to load optimized defaults.
● Short the Clear CMOS jumper on the motherboard.
● Press the Clear CMOS button, on the rear I/O panel. (Only for the motherboard with clear CMOS button.)
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Press Del key to enter the BIOS Setup during POST.
2. Insert the USB flash drive that contains the update file into the computer.
3. Select the M-FLASH tab and click on Yes to reboot the system and enter the flash mode.
4. Select a BIOS file to perform the BIOS update process.
5. After the flashing process is 100% completed, the system will reboot automatically.
Updating the BIOS with Live Update 6
Before updating:
Make sure the LAN driver is already installed and the internet connection is set properly.
Updating BIOS:
1. Install and launch MSI LIVE UPDATE 6.
2. Select Manual scan .
3. Check MB BIOS box and click on Scan button.
4. Select the MB BIOS and click on icon to download and install the latest BIOS file.
5. Click Next and choose In Windows mode . And then click Next and Start to start updating BIOS.
6. After the flashing process is 100% completed, the system will restart automatically.
40 BIOS Setup
EZ Mode
At EZ mode, it provides the basic system information and allows you to configure the basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
XMP switch Setup Mode switch Screenshot Favorites
Language
System information
GAME
BOOST toggle Boot device priority bar
Information display
M-Flash
Favorites
Hardware
Monitor
Function buttons
● Function buttons - enable or disable the LAN Option ROM, Fast Boot, HD audio controller, AHCI, RAID, CPU Fan Fail Warning Control and BIOS Log Review by clicking on their respective button.
● Fan control - click on this button to display the Hardware Monitor menu that allows you to manually control the fan speed by percentage.
● M-Flash - click on this button to display the M-Flash menu that provides the way to update BIOS with a USB flash drive.
● Information display - click on the CPU , Memory , Storage , Fan Info and Help buttons on left side to display related information.
● Boot device priority bar - you can move the device icons to change the boot priority. The boot priority from high to low is left to right.
● System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/
CPU type, memory size, CPU/ DDR voltage, BIOS version and build date.
● Language - allows you to select the language of BIOS setup.
● Screenshot - press this tab or the F12 key to take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
● Setup Mode switch - press this tab or the F7 key to switch between Advanced mode and EZ mode.
● XMP switch - click on the inner circle to enable/ disable the X.M.P. (Extreme
Memory Profile). Switch the outer circle to select the X.M.P. profile. This switch will only be available if the X.M.P. supported memory module is installed.
BIOS Setup 41
● GAME BOOST toggle - click on it to toggle the GAME BOOST for OC.
Important
Please don’t make any changes in OC menu and don’t load defaults to keep the optimal performance and system stability after activating the GAME BOOST function.
● Favorites - press any Favorites tab or the F3 key to enter Favorites menu. It allows you to create personal BIOS menu where you can save and access favorite/ frequently-used BIOS setting items.
▶ Default HomePage - allows you to select a BIOS menu (e.g. SETTINGS,
OC...,etc) as the BIOS home page.
▶ Favorite1~5 one page.
- allows you to add the frequently-used/ favorite BIOS setting items in
▶ To add a BIOS item to a favorite page (Favorite 1~5)
1. Select a BIOS item in SETTINGS or OC menu.
2. Right-click or press F2 key.
3. Choose a favorite page and click on OK.
▶ To delete a BIOS item from favorite page
1. Select a BIOS item in favorite page (Favorite 1~5)
2. Right-click or press F2 key.
3. Choose Delete and click on OK .
42 BIOS Setup
Advanced Mode
Press Setup Mode switch or F7 function key can switch between EZ Mode and
Advanced Mode in BIOS setup.
XMP switch Setup Mode switch Screenshot Favorites
Language
System information
GAME
BOOST toggle Boot device priority bar
BIOS menu selection
BIOS menu selection
Menu display
● GAME BOOST toggle/ XMP switch/ Setup Mode switch/ Screenshot/ Favorites/
Language/ System information/ Boot device priority bar - please refer to the descriptions of EZ Mode Overview section.
● BIOS menu selection - the following options are available:
▶ SETTINGS - allows you to specify the parameters for chipset and boot devices.
▶ OC - allows you to adjust the frequency and voltage. Increasing the frequency may get better performance.
▶ M-FLASH - provides the way to update BIOS with a USB flash drive.
▶ OC PROFILE - allows you to manage overclocking profiles.
▶ HARDWARE MONITOR voltages of system.
- allows you to set the speeds of fans and monitor
▶ BOARD EXPLORER motherboard.
- provides the information of installed devices on this
● Menu display - provides BIOS setting items and information to be configured.
BIOS Setup 43
SETTINGS
System Status
▶ System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day> Day of the week, from Sun to Sat, determined by BIOS. Read-only.
<month>
<date>
<year>
The month from Jan. through Dec.
The date from 1 to 31 can be keyed by numeric function keys.
The year can be adjusted by users.
▶ System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>.
▶ SATA PortX
Shows the information of connected SATA device.
Important
If the connected SATA device is not displayed, turn off computer and re-check SATA cable and power cable connections of the device and motherboard.
▶ System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
▶ DMI Information
Shows system information, desktop Board Information and chassis Information. (Read only).
Advanced
▶ PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press <Enter> to enter the sub-menu.
44 BIOS Setup
▶ PEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto]
[Gen1]
[Gen2]
[Gen3]
This item will be configured automatically by BIOS.
Enables PCIe Gen1 support only.
Enables PCIe Gen2 support only.
Enables PCIe Gen3 support only.
▶ PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks]
▶ ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press <Enter> to enter the sub-menu.
▶ Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.
▶ Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
<Enter> to enter the sub-menu.
▶ Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
▶ LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings.
This item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
▶ Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
▶ Ipv4 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv4 protocol. This item will appear when “Network Stack” is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
BIOS Setup 45
▶ Ipv6 PXE Support [Enabled]
When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This item will appear when “Network Stack” is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
▶ SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode] Enables RAID function for SATA storage devices.
▶ SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
▶ HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
▶ HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
▶ Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the sub-menu.
▶ Initiate Graphic Adapter [PEG]
Selects a graphics device as the primary boot device.
[IGD]
[PEG]
Integrated Graphics Display.
PCI-Express Graphics Device.
▶ Integrated Graphics Share Memory [64M]
Selects a fixed amount of system memory allocated to the onboard graphics. This item will appear when IGD Multi-Monitor is enabled.
▶ IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external graphics card.
[Enabled] Enables multi-screen function for both integrated and external graphics cards.
[Disabled] Disables this function.
▶ USB Configuration
Sets the onboard USB controller and device function. Press <Enter> to enter the submenu.
46 BIOS Setup
▶ USB Controller [Enabled]
Enables or disables all USB controller.
▶ XHCI Hand-off [Enabled]
Enables or disables XHCI hand-off support for the operating system without XHCI hand-off feature. This item will appear when USB Controller is enabled.
▶ Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected and enable the legacy USB support.
[Enabled] Enable the USB support under legacy mode.
[Disabled] The USB devices will be unavailable under legacy mode.
▶ Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
▶ EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013 regulation.
[Enabled] Optimize the system power consumption according to EuP 2013 regulation. It will not support S4 & S5 wake up by USB, PCI and
PCIe devices.
[Disabled] Disables this function.
▶ Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off) before AC power loss.
▶ On board LED Control [On]
Enables or disables the actions of onboard LEDs.
[On]
[Off]
Enables the actions of onboard LEDs.
Disables the actions of power, reset, PCH, audio LEDs.
▶ Windows OS Configuration
Sets Windows 8/ 8.1 detailed configuration and behaviors. Press <Enter> to enter the sub-menu.
▶ Windows 8.1/ 10 WHQL Support [Disabled]
Enables the supports for Windows 8.1/ 10 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware & software) should meet the Windows 8.1/ 10 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows equirement.
[Disabled] Disables this function.
BIOS Setup 47
▶ MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to speed up system boot time which is faster than the boot time of Fast Boot .
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And the following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.
Important
When MSI Fast Boot is enabled, you can use MSI FAST BOOT application to enter
BIOS setup if needed. Please refer Entering BIOS Setup section for details.
▶ Fast Boot [Disabled/ windows7, Enabled/ windows 8.1/ 10]
Enables or disables the fast boot feature for Windows 8.1/ 10. This item will only be available when MSI Fast Boot is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.
▶ Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press <Enter> to enter the sub-menu. This sub-menu will appear when Windows 8.1/ 10 WHQL Support is enabled.
▶ Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press
<Enter> to enter the sub-menu. This sub-menu will appear when Windows 8.1/ 10
WHQL Support is enabled.
▶ Secure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allows you to set the secure boot settings.
[Disabled] Disables this function.
▶ Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys be loaded. This item appears when Secure Boot Support is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load the secure keys.
▶ Key Management
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This submenu will appear when Secure Boot Mode sets to [Custom].
▶ Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press <Enter> to enter the sub-menu.
48 BIOS Setup
▶ Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS] Activates the following items, set wake up events of these items.
[OS] The wake up events will be defined by OS.
▶ Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.
▶ Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specified date/hour/minute/second in these fields (using the <+> and <-> to select the date & time settings).
▶ Resume By PCI/ PCI-E Device [Disabled]
Enables or disables the system wake up by PCI/ PCI-E devices.
[Enabled] Enables the system to be awakened from the power saving modes when activity or input signal of PCI/ PCI-E device is detected. Note: enables this Item to support Resume by USB Device with third party USB 3.0 port.
[Disabled] Disables this function.
▶ Resume By Onboard LAN [Disabled]
Enables or disables the system wake up by Onboard LAN.
[Enabled] Enables the system to be awakened from the power saving modes when activity or input signal of LAN device is detected.
[Disabled] Disables this function.
▶ Resume by USB Device [Disabled]
Enables or disables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity of USB device is detected.
[Disabled] Disables this function.
▶ Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Enables or disables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when activity of PS/2 mouse is detected.
[Disabled] Disables this function.
▶ Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
BIOS Setup 49
▶ Hot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key .
▶ Intel ( R ) Ethernet Connection I219-V
Shows driver information and configuration of the ethernet controller parameter.
Boot
Sets the sequence of system boot devices.
▶ Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
▶ GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec upon bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power button about 4 seconds when the system is off.
[Disabled] Disables this function.
▶ Bootup NumLock State [On]
Select the keyboard NumLock state upon bootup.
▶ AUTO CLR_CMOS [Disabled]
Enables or disables the CMOS data to be resumed automatically when the booting process hang-up over 5 seconds.
▶ Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement. This item will become un-selectable and will be configured automatically by BIOS when Windows 8.1/ 10 WHQL Support is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
▶ FIXED BOOT ORDER Priorities
Sets device priority for system boot.
▶ Boot Option Priorities
These items are used to prioritize the installed boot devices.
Security
▶ Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password, the state of this item will show “Installed”.
50 BIOS Setup
▶ User Password
Sets User Password for system security. User has limited rights to change the BIOS items with user password. This item will be available when administrator password is set. After setting the user password, the state of this item will show “Installed”.
▶ Password Check [Setup]
Selects a condition that will request the password.
[Setup]
[Boot]
A password will be requested for entering the BIOS Setup.
A password will be requested for booting the system .
▶ Password Clear [Enabled]
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept .
Important
When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press <Enter>. The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization.
▶ Trusted Computing
Sets TPM (Trusted Platform Module) function.
▶ Security Device Support [Enabled]
Enables or disables the TPM function to build the endorsement key for accessing the system.
▶ TPM Device Selection [PTT]
Selects TPM device: PTT or dTPM.
[PTT]
[dTPM]
Select it for Intel Platform Trust technology
Select it for installed TPM device.
▶ Device select [Auto]
Selects TPM 1.2 or TPM 2.0 technology for installed TPM device. If set to Auto ,
BIOS will detect it automatically.
▶ Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu.
BIOS Setup 51
▶ Chassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function is ready for the chassis equips a chassis intrusion switch.
[Enabled] Once the chassis is opened, the system will record and issue a warning message.
[Reset] Clear the warning message. After clearing the message, please return to Enabled or Disabled .
[Disabled] Disables this funcion.
Save & Exit
▶ Discard Changes and Exit
Exit BIOS setup without saving any change.
▶ Save Changes and Reboot
Save all changes and reboot the system.
▶ Save Changes
Save current changes.
▶ Discard Changes
Discard all changes and restore to the previous values.
▶ Restore Defaults
Restore or load all default values.
▶ Boot Override
The installed bootable devices will appear on this menu, you can select one of them to be the boot device.
52 BIOS Setup
OC
Important
● Overclocking your PC manually is only recommended for advanced users.
● Overclocking is not guaranteed, and if done improperly, it could void your warranty or severely damage your hardware.
● If you are unfamiliar with overclocking, we advise you to use GAME BOOST function for easy overclocking.
▶ OC Explore Mode [Normal]
Enables or disables to show the normal or expert version of OC settings.
[Normal]
[Expert]
Provides the regular OC settings in BIOS setup.
Provides the advanced OC settings for OC expert to configure in BIOS setup.
Note: We use * as the symbol for the OC settings of Expert mode.
▶ CPU Ratio Apply Mode [All Core]*
Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core] Activate the CPU Ratio field. All CPU cores will run the same CPU ratio that be set in CPU Ratio .
[Per Core] Activate the X-Core Ratio Limit field. Sets each CPU core ratio separately in X-Core Ratio Limit .
▶ CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.
▶ 1/2/3/4-Core Ratio Limit [Auto]*
Allows you to set the CPU ratios for different number of active cores. These items only appear when a CPU that support this function is installed.
▶ Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
BIOS Setup 53
▶ CPU Ratio Mode [Dynamic Mode]*
Selects the CPU Ratio operating mode. This item will appear when you set the CPU ratio manually.
[Fixed Mode] Fixes the CPU ratio.
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU
loading.
▶ Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
▶ Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
▶ GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU.
▶ Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
▶ Misc Setting*
Press Enter, + or - key to open or close the following 3 items related to CPU features.
▶ EIST [Enabled]*
Enables or disables the Enhanced Intel ® SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production.
[Disabled] Disables EIST.
▶ Intel Turbo Boost [Enabled]*
Enables or disables the Intel ®
CPU supports this function.
Turbo Boost. This item appears when the installed
[Enabled] Enables this function to boost CPU performance automatically above rated specifications when system request the highest performance state.
[Disabled] Disables this function.
▶ Enhanced Turbo [Auto]
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
▶ CPU Base Clock (MHz) [Default]
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please note that overclocking behavior and stability is not guaranteed. This item appears when a CPU that support this function is installed.
54 BIOS Setup
▶ CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto] This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
▶ Extreme Memory Profile (X.M.P.) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
This item will be available when the memory modules that support X.M.P. is installed.
[Disabled] Disables this function.
[Profile 1]
[Profile 2]
Uses profile1 settings of XMP memory module.
Uses profile2 settings of XMP memory module.
▶ DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
▶ Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only.
▶ Memory Try It ! [Disabled]
It can improve memory compatibility or performance by choosing optimized memory preset.
▶ DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link] Allows user to configure the DRAM timing for all memory channel.
[UnLink] Allows user to configure the DRAM timing for respective memory channel.
▶ Advanced DRAM Configuration
Press <Enter> to enter the sub-menu. User can set the memory timing for each/ all memory channel. The system may become unstable or unbootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)
▶ Memory Fast Boot [Auto] *
Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training for memory. So the memory will not be initialed and trained when booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting.
BIOS Setup 55
▶ CPU Core/ GT Voltage Mode [Auto]*
Selects the control mode for CPU Core/ GT voltages.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the offset voltage.
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
▶ CPU Voltages control [Auto]
These options allows you to set the voltages related to CPU. If set to Auto , BIOS will set these voltages automatically or you can set it manually.
▶ DRAM Voltages control [Auto]
These options allows you to set the voltages related to memory. If set to Auto , BIOS will set these voltages automatically or you can set it manually.
▶ CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
▶ OC Quick View Timer [3 Sec]*
Sets a time to allow the BIOS to show the variations of CPU base clock, CPU ratio,
Ring ratio and DRAM ratio if any. If set to Disabled, BIOS will not show the variations when you change the CPU base clock, CPU ratio, Ring ratio and DRAM ratio.
▶ CPU Specifications
Press <Enter> to enter the sub-menu. This sub-menu displays the information of installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
▶ CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the key features of installed CPU. Read only.
▶ MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and timings of installed memory. You can also access this information menu at any time by pressing [F5].
▶ DIMM1~4 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of installed memory. Read only.
56 BIOS Setup
▶ CPU Features
Press <Enter> to enter the sub-menu.
▶ Hyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as multi logical processors that can execute instructions simultaneously. In this way, the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
▶ Active Processor Cores [All]
Allows you to select the number of active CPU cores.
▶ Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot problems with older operating system that do not support the processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.
▶ Execute Disable Bit [Enabled]
Intel’s Execute Disable Bit functionality can prevent certain classes of malicious buffer overflow attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always.
[Enabled] Enables NO-Execution protection to prevent the malicious attacks and worms.
[Disabled] Disables this function.
▶ Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run multiple operating systems in independent partitions. The system can function as multiple systems virtually.
[Disabled] Disables this function.
▶ Intel VT-D Tech [Disabled]
Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology.
▶ Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data and instructions into L2 cache from memory for tuning the CPU performance.
[Disabled] Disables the hardware prefetcher.
BIOS Setup 57
▶ Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.
▶ CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
▶ Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the adaptive temperature.
[Disabled] Disables this function.
▶ Intel C-State [Auto]
Enables or disables the Intel C-state. C-state is a processor power management technology defined by ACPI.
[Auto]
[Enabled]
This setting will be configured automatically by BIOS.
Detects the idle state of system and reduce CPU power consumption accordingly.
[Disabled] Disable this function.
▶ C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item appears when Intel C-State is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for power-saving in halt state.
[Disabled] Disables this function.
▶ Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when system is idle. The options of C-state depend on the installed CPU. This item appears when
Intel C-State is enabled.
▶ CFG Lock [Enabled]
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit.
▶ EIST [Enabled]
Enables or disables the Enhanced Intel ® SpeedStep Technology. This item will appear when OC Explore Mode is set to Normal .
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production.
[Disabled] Disables EIST.
58 BIOS Setup
▶ Intel Turbo Boost [Enabled]
Enables or disables the Intel ® Turbo Boost. This item is for Normal mode and appears when a CPU that support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over specification when system request the highest performance state.
[Disabled] Disables this function.
▶ Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
▶ Long Duration Maintained (s) [Auto]
Sets the maintaining time for Long duration power Limit(W).
▶ Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
▶ CPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the current is over the specified value, the CPU will automatically reduce the core frequency for reducing the current.
▶ FCLK Frequency [Auto]
Sets FCLK frequency. Lower FCLK frequency may help you to set higher base clock frequency.
▶ DMI Link Speed [Auto]
Sets DMI speed.
BIOS Setup 59
M-FLASH
M-FLASH provides the way to update BIOS with a USB flash drive. Please download the latest BIOS file that matches your motherboard model from MSI website, save the
BIOS file into your USB flash drive. And then follow the steps below to update BIOS.
1. Insert the USB flash drive that contains the update file into the computer.
2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to reboot and enter the flash mode.
3. The system will enter the flash mode and a file selection menu will appear after rebooting.
4. Select a BIOS file to perform the BIOS update process.
5. After the flashing process is 100% completed, the system will reboot automatically.
60 BIOS Setup
OC PROFILE
▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the submenu.
▶ Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Name the current overclocking profile.
▶ Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclocking profile.
▶ Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Load the current overclocking profile.
▶ Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clear the current overclocking profile.
▶ OC Profile Load from ROM
Load OC profile from BIOS ROM.
▶ OC Profile Save to USB
Save OC profile to the USB flash drive. The USB flash drive should be FAT/ FAT32 format only.
▶ OC Profile Load from USB
Load OC profile from the USB flash drive. The USB flash drive should be FAT/ FAT32 format only.
BIOS Setup 61
HARDWARE MONITOR
Current Temperature & Speed information
Fan control field
Setting
Buttons
Voltage display
▶ Current Temperature & Speed information
Shows the current CPU temperature, system temperature and fans' speeds.
▶ Fan control field
This motherboard provides a fan speed control feature call Smart Fan . Please check the Smart Fan Mode box to enable the Smart Fan. It automatically controls fan speed depending on the current CPU temperature and to keep it with a specific operating speed. When the current CPU temperature is over/ under the setting temperature, the CPU/ system fan will run at the corresponding speed. In this field, drag the color buttons to configure the fan speeds and the target temperatures of CPU for four level.
Important
The changing will achieve after you save the changes and reboot the system.
▶ Function Buttons
[All Full Speed] Configures CPU and system fans to run at full operating speed.
[All Set Default] Configures CPU and system fans to run at default operating
speed.
[All Set Cancel] Discards current changes and restores previous operating speeds to CPU and system fans .
▶ Voltage display
Shows the current voltages of CPU, system and memory.
62 BIOS Setup
Software Description
Installing Windows
®
1. Power on the computer.
7/ 8.1/ 10
2. Insert the Windows ® 7/ 8.1/ 10 disc into your optical drive.
3. Press the Restart button on the computer case.
4. For windows 8.1/ 10, skip this step. For Windows 7, access the BIOS menu
SETTING > Advanced > Windows OS Configuration > Windows 7 Installation and set the item to enabled, save changes and restart.
5. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
6. Select your optical drive from the Boot Menu.
7. Press any key when screen shows Press any key to boot from CD or DVD... message.
8. Follow the instructions on the screen to install Windows ® 7/ 8.1/ 10.
Note: It is suggested to plug in your USB Keyboard/USB Mouse to the leftmost USB port when installing Windows 7.
Installing Drivers
1. Start up your computer in Windows ® 7/ 8.1/ 10.
2. Insert MSI ® Driver Disc into your optical drive.
3. The installer will automatically appear and it will find and list all necessary drivers.
4. Click Install button.
5. The software installation will then be in progress, after it has finished it will prompt you to restart.
6. Click OK button to finish.
7. Restart your computer.
Installing Utilities
Before you install utilities, you must complete drivers installation.
1. Insert MSI ® Driver Disc into your optical drive.
2. The installer will automatically appear.
3. Click Utilities tab.
4. Select the utilities you want to install.
5. Click Install button.
6. The utilities installation will then be in progress, after it has finished it will prompt you to restart.
7. Click OK button to finish.
8. Restart your computer.
Software Description 63
COMMAND CENTER
COMMAND CENTER is an user-friendly software and exclusively developed by MSI, helping users to adjust system settings and monitor status under OS. With the help of COMMAND CENTER, making it possible to achieve easier and efficient monitoring process and adjustments than that under BIOS. In addition, the COMMAND CENTER can be a server for mobile remote control application.
System Information CPU Temperature
Feature Menu
Profile
Buttons
Feature Title
Feature
Control Panel
Next Feature
Previous
Feature
Option Buttons
Page Indicator
Resize Corner
Profile Buttons
● Default - load the default values for the current feature.
● Apply - apply your changes.
● Save - store values in the file with individual file extension.
● Load - load the values from the file.
Important
Every time you shut down the system, the configured setting will be restored to the factory default. If you want to use the saved settings, you have to load it every time by clicking the Load and Apply buttons.
CPU Frequency
CPU Frequency control panel allows you to change
CPU Ratio and Base clock. You can see the current frequency of each CPU core on the top of the panel.
64 Software Description
CPU Fan
CPU Fan control panel provides Smart mode and
Manual Mode . You can switch the control mode by clicking the Smart Mode and Manual Mode buttons on the top of the CPU Fan control panel.
● Manual Mode - allows you to manually control the
CPU fan speed by percentage.
● Smart Mode - a linear fan speed control feature.
The control panel contains 4 dots allows you to drag and adjust the Smart Speed slopes. The fan speed will be changed along these lines with CPU temperature. The white dot will create strip chart in real time.
● System Fan Button - to open the system fan control panel in new window.
● Fan Tune Button - to automatically optimize the smart fan setting.
Manual Mode
Smart Mode
CPU Voltage
CPU Voltage control panel allows you to control the
CPU voltage.
DRAM Frequency & DRAM Voltage
● DRAM Frequency - Shows the DRAM clock, ratio and frequency.
● DRAM Voltage - Allows you to adjust the DRAM voltage. The risky values are displayed in red.
IGP Frequency & GT Voltage
● IGP Frequency - Allows you to adjust the
IGP ratio, and shows the IGP clock, ratio and frequency.
● GT Voltage - Allows you to adjust the GT voltage.
The risky values are displayed in red.
Software Description 65
GAME BOOST
GAME BOOST provides a specified CPU frequency for overclocking the CPU.
Option Buttons - Advanced
When click the Advanced button, The Voltage , Fan and DRAM icons will appear.
● Voltage - allows you to adjust advanced voltage values of CPU and chipset.
● Fan - allows you to control the system fans speed.
● DRAM - shows the current Advanced DRAM parameters, and allows you to change the settings by selecting values from the drop-down menu on the right hand side.
● Sensor - allows you to monitor your motherboard temperature and fan speed with the virtual thermal image. You can drag and drop the fan icons to new locations.
When you press the Cooling button, all fans will run at full speed.
Option Buttons - Setting
When click the Setting button, The Record , Warning and Mobile Control icons will appear.
● Record - allows you to monitor the status of voltage, fan speed and temperature in real time.
▶ To filter record charts, select the check box next to the items.
▶ When click the Play button, the chart pane will start to show the recording chart.
If you want to check the value of a specific spot on chart, please move the orange vertical line to the spot.
▶ History Record stores the data and names with date and time.
▶ To make a history record: Select items and click the Record button. When finished, click the Record button again. The data will be stored in the drop-down menu.
▶ To load a record, click the drop-down menu and select one from the list.
▶ To delete a record, select the record that you want to delete, and click the
Can icon.
Trash
66 Software Description
● Warning - contains fields of voltage, fan speed and temperature for you to set the threshold values. When system detects the status over your settings, a warning message will pop-up.
● Mobile Control - is only available for the motherboard with the built-in WiFi module.
It allows you to enable/disable the COMMAND CENTER Remote Server. Please refer to the instruction on the Mobile Control control panel.
● To start remote control: (optional)
1. Download and install MSI ® COMMAND CENTER APP to your mobile device.
2. Enable COMMAND CENTER Remote Server on the Mobile Control panel.
3. Enable SoftAP Management .
4. Enter SSID and Password , and then click the Apply button.
5. Activate Wi-Fi ® on your mobile device and connect to SoftAP with the SSID.
6. Run MSI ® COMMAND CENTER APP on your mobile device.
7. Find the IP address on the SoftAP Management Setting area, and enter the IP address on your MSI ® COMMAND CENTER APP to link your system.
8. Press Refresh on the MSI ® COMMAND CENTER APP to verify that monitoring and OC functions are working properly.
Option Buttons - Information
When click the Information button, The Motherboard , CPU , Memory and HW monitor icons will appear.
You can click the icons to open the related information.
Gadget Mode
COMMAND CENTER provides a gadget mode to monitor the system status. You can switch between gadget mode and full mode by clicking the arrow icon on the top left.
● To arrange gadgets:
1. Click the Spanner icon on the Gadget mode, a configuration panel will slide out.
2. Select the check box next to the items.
3. Click the Close button.
Software Description 67
LIVE UPDATE 6
LIVE UPDATE 6 is an application for the MSI ® system to scan and download the latest drivers, BIOS and utilities. With LIVE UPDATE 6, you don’t need to search the drivers on websites, and don’t need to know the models of motherboard and graphics cards.
LIVE UPDATE 6 will download the appropriate drivers automatically.
Download Options
Download List
Scan / Download / Total
Installer button
System Information
Last Scanned Date
There are Live Update, History, Setting and System Information tabs at the top.
You can click the tab to switch the control panel.
● Live Update - When you launch LIVE UPDATE 6, you will see the Live update tab at first. This tab allows you to select files to download. You can also read the relevant information by clicking the information icon on the right of the item listed.
● History - shows the downloading history.
● Setting - allows you to specify the frequency that LIVE UPDATE 6 remind you to update.
● System Information - displays the information of the system.
Updating The System
This section describes how to update your system with LIVE UPDATE 6. Please follow the steps below:
1
2
4
5
3
68 Software Description
1. Select the Live Update tab.
2. Choose Automatic scan , system will automatically scan all the items and search for the latest update files. Or you can choose Manual scan and select the items you wish to scan.
3. Click the Scan button at the bottom. It may take several moments to complete the process.
4. When the download list appears, please select the items you intend to update.
5. Click Download button at the bottom.
6. When Save Path prompt, you can specify a download directory.
7. When downloading you will see the screen below. It may take several moments to complete the process.
8. To install the applications, simply unpack the packages and install.
Total Installer
Total Installer is a convenient feature to simplify frequent installing procedure. To use
Total Installer:
2
3
1
1. Scan updates in Live Update tab.
2. Check the Select All check-box you intend to update.
3. Click the Total Installer button. LIVE UPDATE 6 will automatically install them.
4. When prompted, click OK to complete the Total Installer procedure.
5. Reboot your system.
Software Description 69
GAMING APP
GAMING APP is an application designed to quickly control your system for improving gaming performance.
Setting Button Information Button
Display Mode Button
CPU Frequency
GPU Frequency
Full Speed GPU Fan
Control Mode Buttons
Gaming Function
Buttons
● Setting Button - allows you to run GAMING APP when Windows starts.
● Information Button - shows the information of this application.
● Display Mode Button - allows you to switch between CPU clock display mode and Status bar display mode .
● CPU Frequency - shows the current CPU frequency.
● Control Mode Buttons
▶ OC Mode - automatically overclock the CPU.
▶ Gaming Mode specification.
- force the CPU to stay at maximum clock speed limited by CPU
▶ Silent Mode - sets the CPU clock to the default value.
● Gaming Function Buttons - allows you to use Eye Rest, OSD, LED Effect,
Gaming Hotkey and Gaming Mouse Control functions.
Eye Rest
Eye Rest allows you to optimize the display on your monitor.
● EyeRest - reduces blue-light of your LED backlit screen, in order to protect your eyes.
● Gaming - automatically increase contrast ratio of your screen.
● Movie - automatically increase dynamic contrast ratio of your screen.
● Customize - allows you to adjust gamma, contrast and color balance for your screen.
● Default - loads the default settings.
70 Software Description
OSD Setting Panel
Use the OSD setting panel to specify information within on-screen display (OSD).
● Apply Button - allows you to accept selections.
LED Effect
LED Effect allows you to control LED lights on your motherboard.
● All LED - controls all LEDs on your motherboard and graphics cards.
● Each LED - separately controls each LED on your motherboard and graphics cards.
● LED effects - toggles the LED Effect function.
● Styles - select the effect from the drop-down list.
● Music - flashes the LED light with music’s beat.
● LED color - allows you change the LED color.
● Apply Button - allows you to accept settings of the LED Effect function.
Software Description 71
Gaming Hotkey
Gaming Hotkey provides instant control of the system through user defined hotkeys.
Categories Toggle Gaming Hotkey ON/OFF
Hotkey Editor
Current Hotkeys
● Gaming Hotkey ON/OFF - allows you to turn ON/OFF the Gaming Hotkey function.
● Categories Toggle - allows you to toggle over the Hotkey categories .
▶ Windows Keys - allows you to define hotkeys to replace Windows default keyboard shortcuts.
▶ Login Keys - provides hotkey login function.
▶ MSI Smart Keys - allows you to define hotkeys for MSI Smart Keys.
● Hotkey Manager - allows you to create, edit and delete hotkeys.
● Current Hotkeys - shows all existing hotkeys.
Important
● The Caps Lock , Num Lock , Scroll Lock , Window Home , Application and
BackSpace keys can not be used as hot-keys.
● Some key combinations are reserved for use by Microsoft Windows and can not be assigned as a hotkey.
72 Software Description
Gaming Mouse Control
Gaming Mouse Control provides mouse macro function. You can also use it to change
DPI of your mouse.
Delay Time
Macro Hot Key
Mouse Action
Action List
DPI Setting
Defalut Button
DPI Hot Key
Test Area
Edit Buttons
Load Button
Save Button
Clear Button
● Delay Time - allows you to input delay time and click the Add button to insert a delay in the macro.
● Macro Hot Key - allows you to assign a hotkey from A to Z to activate the macro.
● Mouse Action - assigns mouse actions to the macro.
▶ New - captures the mouse coordinate and add to the macro.
▶ Left - add a left-click to the macro.
▶ Middle - add a middle-click to the macro.
▶ Left - add a left-click to the macro.
● Action List - shows the actions of the current macro.
● Edit Buttons - there 3 buttons for editing the macro.
▶ Run - activates the macro.
▶ Delete - removes the selected action from the macro.
▶ Clear - removes all actions from the macro.
● Load Button - allows you to load a macro.
● Save Button - allows you to save the macro to a file.
● DPI Setting - allows you select the mouse DPI from the drop-down menu.
● Default Button - reverts to the default DPI setting.
● DPI Hot Key - allows you to assign a hotkey from A to Z to activate the DPI setting.
Please note that you muse hold the hotkey to keep the DPI setting. When you release the hotkey, the DPI setting will be reverted to default.
● Test Area - allows you to test the mouse movement.
● Clear Button - clears the test area.
Software Description 73
M-CLOUD
M-CLOUD is an application of MSI network sharing. It allows you to turn your computer into Wi-Fi AP. It can also transfer files between your MSI computers.
Soft AP
ON/OFF
Server
Information
History
Users &
Permissions
Local
Directory
Server
Directory
File Transfer
● Soft AP ON/OFF - click on the Soft AP ON/OFF button to enable virtual Wi-Fi AP.
● Server Information - indicate information of current server connection.
● History - click on the History button to view file transfer history.
● Users & Permissions - click on the Users & Permissions button to open the
Users & Permissions Management window.
● Local/ Server Directory - you can upload or download files between the local and the server. There 5 icons on the toolbar at the top of Local/ Server Directory.
▶ Refresh - refresh the local/ server directory.
▶
▶
Delete - you needs delete permission to delete files.
Root Folder - navigate to root folder.
▶ Up a Level - navigate up one directory level.
▶ New Folder - you needs delete permission to create a new folder.
● File Transfer - click > button to upload files from the local to the server. Click < button to download files from the server to the local.
74 Software Description
Setting up Soft AP (optional)
The Soft AP function is only available for the motherboard with the built-in WiFi module. You can share your network connection to your smartphones, tablets and laptops with the Soft AP function.
Important
● You must have an active network connection and an installed Wi-Fi moudle to enable Soft AP.
● If you connect to Internet by using PPPoE , you should check Allow other people to use this connection when set up a new connection.
To use Soft AP:
1
2
3
4
1. Click the Soft AP button to ON and the Soft AP dialogue will pop up.
2. Select an existing network connection.
3. Fill in Wi-Fi network name ( SSID ) and network password.
4. Click Apply button to complete.
Installing Cloud Storage
M-CLOUD needs a connection to Google Drive or Dropbox in order to detect your available servers.
Cloud Storage
Server Detection
File Transfer
If you haven’t installed either Google Drive or Dropbox software yet, you can download and install it from below web address, and please follow the direction on the web page.
Google Drive : https://www.google.com/drive/download/
Dropbox : https://www.dropbox.com/downloading/
Software Description 75
Managing User Accounts
This section describes how to create/ remove a user account and configure individual access permissions.
1
2 5
3 4
1. Click the Users & Permissions button and the Users & Permissions
Management window will pop up.
2. Click Add Account button create a new user account.
3. Fill in user’s ID , password and Confirm Password fields.
4. Select permission for the user account.
5. Click Apply button to complete.
Once you create an account 3 management icons will appear on the right hand side.
▶ Delete - delete the user account.
▶ / Unlock/ Lock - unlock/ lock the user account.
▶ Edit - change the user password and permission.
Transferring Files
This section describes how to transfer files between your local computer and a server.
Important
● Before using the M-CLOUD to transfer files, you need to connect both the local computer and the server to either Google Drive or Dropbox properly with the same user account.
● To allow your computers to communicate through the firewall with M-CLOUD, you have to open ports 24680~24780 .
1. Activate M-CLOUD both on the local computer and the server.
2. Select a server from the bar
3. Enter User ID and Password and click the Login button.
4. You can select files from Local/ Server Directory and then click the File
Transfer button to upload or download them. You can also drag the files from one side and drop them on the other side.
76 Software Description
RAMDISK
RAMDISK creates a virtual RAM drive using the available memory in your computer, the performance of the RAMDISK is faster than an SSD and hard drive. RAMDISK allows you to store any temporary information on it. Furthermore, using the RAMDISK will extend your SSD’s life by sparing it from excessive reading and writing.
Creating a RAM Disk
When RAMDISK is started, it will create a default RAM disk. If you want to change settings, refer to following instructions.
Setting
Backup
Option
Apply
Button
Management
● Setting - specify Letter , Name , Size and Format of the RAM disk.
● Option - select browser temporary files to save/load on the RAM disk. You can also add software files to improve reading speed.
● Backup - specify backup and restore settings to prevent data loss. All files will be lost each time the RAMDISK is stopped if you do not backup.
▶ Browse Button - set the path to the image file.
▶ Backup Right Now Button - manually backup files.
▶ Restore On Boot - check this box to have the image file loaded automatically when RAMDISK starts.
▶ Auto Backup - check this box to backup automatically over a period of time.
● Apply Button - allows you to apply changes.
● Management - shows RAMDISK information and allows you to delete files.
Remove the RAM disk
Dislpay information
Delete files in the RAM disk.
Software Description 77
GAMING LAN MANAGER
GAMING LAN MANAGER is an utility for traffic shaping for the Windows 7/ 8.1/ 10.
It can keep your internet fast during heavy upload/ download and improve your ping for online games. If your motherboard has a Wi-Fi module, GAMING LAN MANAGER provides virtual access point function for traffic shaping for your mobile devices.
● Applications - displays currently using network bandwidth applications. You can prioritize Games, Medias or File sharing programs as high as possible.
● Performance - shows top 5 applications by total traffic, allows you to monitor network bandwidth usage.
● Network Test - allows you to setup bandwidth control.
● Advanced Setting - allows you to expand RWIN to accelerate download speed.
You can also block IP address and setup virtual access point.
● Information - shows version information.
Configuring Bandwidth
This section describes how to configure Internet Provider Speed. You can configure default internet upload and download bandwidth from the Network Test tab on the
GAMING LAN MANAGER window.
Important
Before using the GAMING LAN MANAGER for the first time, you should use the
Test Network Speed button which runs a speed test of your current total Internet bandwidth delivered through your Internet service provider.
78 Software Description
Speed Testing
The speed testing is used to optimize bandwidth usage. To test the Upload and Download speed, please follow the steps below:
1
1. Click the Network Test block in GAMING LAN MANAGER.
3
4
2
2. Click Test Network Speed button. The test takes several minutes to test your network speed.
3. Enter the testing results into Upload Speed and Download Speed fields.
4. Check the Enable Bandwidth Control to allow the GAMING LAN MANAGER to manage the bandwidth.
Software Description 79
Intel
®
Extreme Tuning Utility
Intel ® Extreme Tuning Utility (Intel XTU) is a simple overclocking software for you to tune, test and monitor your system.
Tuning Controls
Views
Settings
Help
Navigation System
Table
System
Graphs
● Views Settings Help
System
Monitors
▶ Views - toggles to switche between Monitoring and Show All view.
▶ Settings - opens the General Settings window.
▶ Help - displays the help content for Intel XTU in a separate window.
● Navigation - lists all of the major functions of Intel XTU.
▶ System Information - shows the details about your system.
▶ App-Profile Pairing - tunes automatically based on active application.
▶ Manual Tuning - changes system settings in a free form.
▶ Stress Test - tests the stability of your system.
▶ Benchmarking - analyzes and compares your system’s performance against other system profiles.
▶ Profiles - manages sets of system settings.
● Tuning Controls - displays the controls for changing the system settings in manual tuning. For stress tests and profiles, this area displays the settings for these features.
● System Table - displays information about the current system settings and a summary of your changes.
● System Graphs - shows measured system values over a period of time. The system graphs update live as changes are detected in the system. You can customize the system graphs to show the data you need for your overclocking strategy in the system graphs preferences.
● System Monitors - shows the range of the value, averages, and the current value.
The monitors change color if the monitored values fall into warning or critical zones.
80 Software Description
RAID Configuration
Below are the different types of a RAID.
RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and provides enhanced read performance.
RAID 5 provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.
RAID level comparison
RAID 0
Minimum # drives 2
Data protection None
Read performance Excellent
Write performance Excellent
Capacity utilization 100%
RAID 1
2
Excellent
OK
Good
50%
RAID 5 RAID 10
3
Excellent
Good
4
Excellent
OK
OK Good
67%~(1-1/n) 50%
Using Intel
®
Rapid Storage Technology Option ROM
First, you need to set the SATA mode to RAID in BIOS to create, delete and reset
RAID volumes. To enter the IRST Option ROM, reboot and press Ctrl + I keys to enter the IRST Option ROM during the POST, the following window will appear.
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume
3. Reset Disks to Non-RAID
5. Acceleration Options
6. Exit
[ ]
RAID Volumes :
None defined.
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
Important
The following procedure is only available with a newly-built system or if you are reinstalling your OS. It should not be used to migrate an existing system to RAID.
RAID Configuration 81
Creating RAID Volume
1. Select option Create RAID Volume and press Enter key. The following screen appears.
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :
Volume0
RAID1(Mirror)
Select Disks
N / A
XXX.X GB
N / A
Create Volume
RAID 1 : Mirrors data (redundancy) .
[ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select
2. Specify a RAID Volume name and then press the Tab or Enter key to go to the next field
3. Use the ↑↓←→ arrow keys to select the RAID level best suited to your usage model in RAID Level.
4. In the Disk field, press Enter key and use Space key to select the disks you want to create for the RAID volume, then click Enter key to finish selection. This field will become available according to the selected RAID level.
5. Select the strip size for the RAID array by using the ↑ upper arrow or ↓ down arrow keys to scroll through the available values, and pressing the Enter key to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.
6. Select the capacity of the volume in the Capacity field. The default value is the maximum volume capacity of the selected disks.
Important
Since you want to create two volumes, this default size (maximum) needs to be reduced. Type in a new size for the first volume. As an example: if you want the first volume to span the first half of the two disks, re-type the size to be half of what is shown by default. The second volume, when created, will automatically span the remainder of two hard drives.
7. Go to the Create Volume field and press Enter , a WARNING message will appear for you to confirm if you are sure to create the RAID volume. Press Y to continue.
82 RAID Configuration
Delete RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key to select a RAID volume for deletion. Then press Delete key to delete the selected
RAID volume. The following screen appears.
Name Level Drives Capacity Status Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete “Volume0”? (Y / N) :
Deleting a volume will reset the disks to non-RAID.
WARNING : ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume
Press Y key to accept the volume deletion.
Reset Disks to Non-RAID
Select option Reset Disks to Non-RAID from the main menu screen and press Enter to delete the RAID volume and remove any RAID structures from the drives. Use the Space key to select the disks and press Enter key. A confirmation sentence will appear below, and then press Y key to accept the selection
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume
Resetting RAID disk will remove its RAID structures and revert it to a non-RAID disk.
None defined.
(This does not apply to Recovery volumes)
Physical Devices :
Serial # Size Status
XXXXXXXXXXXXXX XXX.XGB Member Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
Select the disks that should be reset.
[ ↑↓] - Previous/ Next [SPACE] - Selects [ENTER] - Selection Complete
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
RAID Configuration 83
Important
● You will lose all data on the RAID drives and any internal RAID structures when you perform this operation.
● Possible reasons to Reset Disks to Non-RAID could include issues such as incompatible RAID configurations or a failed volume or failed disk.
Recovery Volume Options
Select option Recovery Volume Options from the main menu screen and press
Enter to change recovery volume mode. The following screen appears:
1. Enable Only Recovery Disk
2. Enable Only Master Disk
Enable Only Recovery Disk - enables recovery disk if available and disables master disk.
Enable Only Master Disk - enables master disk if available and disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.
[ ↑↓] - select [ESC] - Previous Menu [ENTER] - Select
Recovery mode will change from Continuous Update to On-Request after you enable
Only Recovery Disk or Only Master Disk .
Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation.
RAID Volumes
ID Name Level Strip Size Status Bootable
0 Volume0 RAID 1(Mirror) N/A XXX.XGB Degraded Yes
Physical Disks:
Port Device Model Serial #
1 XXXXXXXXXXXXX XXXXXXXXXXXXX
2 XXXXXXXXXXXXX XXXXXXXXXXXXX
Size Type/Status(Vol ID)
XXX.XGB Member Disk (0)
XXX.XGB Member Disk (0)
Press <CTRL-I> to enter Configuration Utility..
Missing Hard Drive Member
1. Power off.
2. Reconnect the hard drive.
84 RAID Configuration
3. Reboot to Windows ® ; the rebuild will occur automatically.
Failed Hard Drive Member
1. Power off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4. Select the port of the destination disk for rebuilding, and then press Enter .
1. Create RAID Volume
2. Delete RAID Volume 4. Recovery Volume Options
“Degraded” volume and disk available for rebuilding detected. Selecting
Serial # Size
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
5. Exit IRST Option ROM, reboot to Windows ® .
6. When prompted to rebuild the RAID volume, click Yes .
7. The Intel ® Rapid Storage Technology application will be launched. Right-click the new hard drive and select Rebuild to this Disk . The Rebuild Wizard will be launched which will guide you through the process of rebuilding to the new hard drive.
RAID Configuration 85
Troubleshooting
Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below.
The power is not on.
● Connect the AC power cord to an electrical outlet securely.
● Check if all ATX power connectors like JPWR1~2 is connected from the power supply to the motherboard?
● Some power supply units have a power button on the rear side, make sure the button is turned on.
● Check if the power switch cable is connected to JFP1 pin header properly.
● Verify the Clear CMOS jumper JBAT1 is set to Keep DATA .
● Test with another known working power supply of equal or greater wattage.
The power is on, but no signal to monitor
● Connect the monitor power cord to a electrical outlet securely.
● Make sure the monitor is turned on.
● Select different inputs on the monitor.
● If 3 long beeps are heard, remove all memory modules and try to install only one memory module in the DIMM2 slot first and then restart the computer.
● If 1 long 2 short beeps are heard, remove and reinstall the graphics card and then restart the computer.
● Test with another known working graphics card.
The computer does not boot after updating the BIOS
● Clear the CMOS.
● Use the secondary BIOS to bootup the system (Only for motherboard with
Dual BIOS)
Lost BIOS password
● Clear the CMOS, but that will cause you to lose all customized settings in the BIOS.
There is no audio
● Adjust the volume.
● Connect the speakers/headphones to audio ports on the motherboard rear
IO panel.
● Remove secondary speakers/ headphones, HDMI cables, USB audio devices.
● Test with another known working speaker or headphone.
There is no network
● Make sure the network chipset driver has been installed.
● Verify if the network cable is properly connected and make sure the LAN port
LEDs are properly illuminated.
● Verify your TCP/IP settings.
● Restart or reset your router.
● Test with another known working LAN cable.
The USB device is not working
● Make sure your USB drive driver has been installed.
● Verify if USB device is listed in
Windows ® Device Manager.
● Connect the USB device to other USB port on the motherboard rear IO panel.
86 Troubleshooting
Regulatory Notices
FCC Compliance Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Tested to comply with FCC standards
FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity
with the essential safety requirements and other relevant provisions set out in the European
Directive.
Hereby, Micro-Star International CO., LTD declares that this device is in compliance
C-Tick Compliance
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Taiwan:
廢電池請回收
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in
California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC
No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.html
B급 기기 (가정용 방송통신기자재)
이 기기는 가정용(B급) 전자파적합기기로서 주
로 가정에서 사용하는 것을 목적으로 하며, 모
든 지역에서 사용할 수 있습니다.
クラスB情報技術装置
この装置は、クラスＢ情報技術装置です。
この装置は、家庭環境で使用することを目
的としていますが、この装置がラジオやテ
レビジョン受信機に近接して使用されると、受信障害
を引き起こすことがあります。取扱説明書に従って
正しい取り扱いをして下さい
VCCI-B
Regulatory Notices 87
WEEE (Waste Electrical and
Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must remind you that...
Under the European Union (“EU”)
Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/
EC, which takes effect on August 13,
2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer
Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und
Elektronik-Altgeräte dürfen Elektro- und Elektronik-
Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die
Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen.
Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen
Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces
équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....
В соответствии с директивой Европейского
Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива
WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы.
MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja.
MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii
Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.
88 Regulatory Notices
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik
Malzeme Atığı, 2002/96/EC Kararnamesi altında 13
Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi
çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan
MSI markalı ürünlerin kullanım süreleri bittiğinde MSI
ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost
MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat
“elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích
EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti
Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként,
és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az
MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo
Smaltimento dei Materiali Elettrici ed Elettronici,
Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali
Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
日本JIS C 0950材質宣言
日本工業規格JIS C 0950により、2006年7月1日以降に
販売される特定分野の電気および電子機器について、
製造者による含有物質の表示が義務付けられます。 http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the “India E-waste
(Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Türkiye EEE yönetmeliği
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Україна обмеження на наявність небезпечних речовин
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнані, затвердженого постановою Кабінету Міністрів України від 3 грудня
2008 № 1057.
Việt Nam RoHS
Kể từ ngày 01/12/2012, tất cả các sản phẩm do công ty MSI sản xuất tuân thủ Thông tư số 30/2011/TT-BCT quy định tạm thời về giới hạn hàm lượng cho phép của một số hóa chất độc hại có trong các sản phẩm điện, điện tử”
Regulatory Notices 89
产品中有害物质的名称及含量
部件名称
印刷电路板组件*
铅
(Pb)
X
汞
(Hg)
O
镉
(Cd)
有害物质
六价铬
(Cr(VI))
多溴联苯
(PBB)
O O O
多溴二苯醚
(PBDE)
O
电池**
外部信号连接头
X
X
O
O
O
O
O
O
O
O
O
O
线材 X O O O O O
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合欧
盟RoHS要求。
* 印刷电路板组件: 包括印刷电路板及其构成的零部件。
** 电池本体上如有环保使用期限标识，以本体标识为主。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 產品部件本体上如有环保使用期限标识，以本体标识为主。
Copyright
Micro-Star Int’l Co.,Ltd.
Copyright © 2015 All rights reserved.
The material in this document is the intellectual property of Micro-Star Int’l Co.,Ltd. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Technical Support
If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
● Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http:// www.msi.com
● Register your product at: http:// register.msi.com
Trademark Recognition
All product names used in this manual are the properties of their respective owners and are acknowledged.
Revision History
Version 1.0, 2015/07, First release.
90 Regulatory Notices
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Intel LGA 1151 (Socket H4) Intel® Celeron®, Intel® Pentium®
PC ATX Intel® Z170 7.1 channels
DDR4-SDRAM 4 DIMM ECC Maximum internal memory: 64 GB
SATA III
2-Way SLI, 3-Way CrossFireX
BIOS type: UEFI Clear CMOS jumper
Gigabit Ethernet
Frequently asked questions
The MSI Z170A GAMING PRO supports DDR4 memory up to 3400+(OC) MHz.
The MSI Z170A GAMING PRO has 6 SATA 6Gbps ports.
Yes, the MSI Z170A GAMING PRO supports multi-GPU configurations with NVIDIA® SLI™ and AMD® CrossFire™.