advertisement
Unpacking
Thank you for buying the MSI ® Z370 PC PRO motherboard. Check to make sure your motherboard box contains the following items. If something is missing, contact your dealer as soon as possible.
Motherboard
Drivers & Utilities
Disc Motherboard User
Guide
I/O Shield
SATA Cable x2
Unpacking
1
Safety Information
y The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. y Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. y Hold the motherboard by the edges to avoid touching sensitive components. y It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. y
Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed. y
Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case.
y
Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user. y
If you need help during any installation step, please consult a certified computer technician.
y
Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component.
y
Keep this user guide for future reference.
y Keep this motherboard away from humidity.
y Make sure that your electrical outlet provides the same voltage as is indicated on the
PSU, before connecting the PSU to the electrical outlet.
y Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
y All cautions and warnings on the motherboard should be noted.
y If any of the following situations arises, get the motherboard checked by service personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to user guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
y Do not leave this motherboard in an environment above 60 the motherboard.
° C (140 ° F), it may damage
2
Safety Information
Quick Start
Preparing Tools and Components
Intel ® LGA 1151 CPU
CPU Fan Thermal Paste
DDR4 Memory
Chassis
Power Supply Unit
SATA DVD Drive SATA Hard Disk Drive Graphics Card
Phillips Screwdriver A Package of Screws
Quick Start
3
Installing a Processor
http://youtu.be/bf5La099urI
2
1
4
Quick Start
3
6
4
7
5 9
8
Installing DDR4 memory
http://youtu.be/T03aDrJPyQs
1
3
2
1
2
3
DIMMA2
DIMMB2
DIMMA2
DIMMB2
DIMMB1
DIMMA2
DIMMA1
Quick Start
5
Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI
SW
RESET
POWER SW
HDD LED
POWER LED+
POWER LED-
2
1
JFP1
9
10
5
7
1
3
9
HDD LED +
HDD LED -
Reset Switch
Reset Switch
Reserved
6
8
2
4
10
Power LED +
Power LED -
Power Switch
Power Switch
No Pin
HDD LED
POWER LED
HDD LED -
HDD LED +
POWER LED -
POWER LED +
JFP1
6
Quick Start
Installing the Motherboard
1
2
Quick Start
7
Installing SATA Drives
http://youtu.be/RZsMpqxythc
2
1
3
5
4
8
Quick Start
Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
1
3
2
5
6
4
Quick Start
9
Connecting Peripheral Devices
10
Quick Start
Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4
ATX_PWR1
CPU_PWR1
Quick Start
11
Power On
2
3
4
1
12
Quick Start
Contents
Unpacking .............................................................................................................. 1
Safety Information ................................................................................................. 2
Quick Start ............................................................................................................. 3
Specifications ....................................................................................................... 15
Block Diagram .................................................................................................... 20
Rear I/O Panel ..................................................................................................... 21
Overview of Components .................................................................................... 23
CPU_PWR1, ATX_PWR1: Power Connectors ....................................................... 31
JUSB1, JUSB2: USB 3.1 Gen1 Connectors........................................................... 32
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors ................................... 33
JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 35
JTBT1: Thunderbolt Add-on Card Connector ...................................................... 36
Contents
13
BIOS Setup ........................................................................................................... 38
Software Description ........................................................................................... 64
RAID Configuration .............................................................................................. 83
Using Intel ® Rapid Storage Technology Option ROM ........................................... 83
Intel
Optane™ Memory Configuration .............................................................. 91
Troubleshooting .................................................................................................. 95
14
Contents
Specifications
CPU
Chipset
Memory
Expansion Slots
Onboard Graphics
Multi-GPU
Supports 8th Generation Intel ® Core™ Processors, and Intel ®
Pentium ® and Celeron ® Processors for Socket LGA1151
Intel ® Z370 Express Chipset y 4x DDR4 memory slots, support up to 64GB y Supports DDR4 4000+(OC)/ 3866(OC)/ 3733(OC)/ 3600(OC)/
3466(OC)/ 3400(OC)/ 3333(OC)/ 3300(OC)/ 3200(OC)/
3000(OC)/ 2800(OC)/ 2667/ 2400/ 2133 MHz Memory y Supports Dual-Channel mode y Supports non-ECC, un-buffered memory y
Supports Intel ® Extreme Memory Profile (XMP)
* Please refer www.msi.com for more information on compatible memory.
y 2x PCIe 3.0 x16 slots (supports x16/x4 mode)* y
3x PCIe 3.0 x1 slots** y
1x PCI slot
* The PCI_E4 slot will be unavailable when an M.2 PCIe SSD module has been installed in the M.2_2 slot.
** The PCI_E2/ PCI1 slot will be unavailable when an expansion card has been installed in the PCI_E3/ PCI_E5 slot.
y
1x HDMI™ port, supports a maximum resolution of
4096x2160@30Hz, 2560x1600@60Hz y
1x DVI-D port, supports a maximum resolution of
1920x1200@60Hz y
1x VGA port, supports a maximum resolution of
2048x1536@50Hz, 2048x1280@60Hz, 1920x1200@60Hz y Supports 2-Way AMD ® CrossFire™ Technology
Continued on next page
Specifications
15
Storage
RAID (optional)
USB
Audio
LAN
Continued from previous page
Intel ® Z370 Chipset y 6x SATA 6Gb/s ports* y
2x M.2 slots (Key M)
Support up to PCIe 3.0 x4 and SATA 6Gb/s
Support PCIe 3.0 x4 NVMe U.2 SSD with Turbo U.2 Host
Card**
M2_1 slot supports 2242/ 2260 /2280/ 22110 storage devices
M2_2 slot supports 2242/ 2260 /2280 storage devices
Intel ® Optane™ Memory Ready for all M.2 slots***
* M.2 and SATA ports maximum support 2x M.2 PCIe SSDs + 6x SATA HDDs.
Please refer to page 29 for M.2 slots with examples of various combination possibilities.
** The Turbo U.2 Host Card is not included, please purchase separately.
*** Before using Intel ® Optane™ memory modules, please ensure that you have updated the drivers and BIOS to the latest version from MSI website.
Intel ® Z370 Chipset y
Supports RAID 0, RAID1, RAID 5 and RAID 10 for SATA storage devices y
Supports RAID 0 and RAID1 for M.2 PCIe storage devices*
* M.2 PCIe RAID volume can be created with M.2/Optane Genie. Please refer to page 88 for details.
y
ASMedia ® ASM3142 Chipset
1x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) Type-C port on the back panel
1x USB 3.1 Gen2 (SuperSpeed USB 10Gbps) Type-A port on the back panel y Intel ® Z370 Chipset
8x USB 3.1 Gen1 (SuperSpeed USB) ports (4 Type-A ports on the back panel, 4 ports available through the internal USB connector)
6x USB 2.0 (High-speed USB) ports (2 ports on the back panel, 4 ports available through the internal USB connector) y Realtek ® ALC887 Codec y
7.1-Channel High Definition Audio
1x Intel I219-V Gigabit LAN controller
Continued on next page
16
Specifications
Continued from previous page
Back Panel
Connectors
Internal Connectors
I/O Controller y 1x PS/2 keyboard/ mouse combo port y 2x USB 2.0 Type-A ports y
1x VGA port y 1x DVI-D port y 1x HDMI™ port y 1x LAN (RJ45) port y
4x USB 3.1 Gen1 Type-A ports y 1x USB 3.1 Gen2 Type-A port y 1x USB 3.1 Gen2 Type-C port y 3x audio jacks y 1x 24-pin ATX main power connector y 1x 8-pin ATX 12V power connector y
6x SATA 6Gb/s connectors y
2x USB 2.0 connectors (support additional 4 USB 2.0 ports) y 2x USB 3.1 Gen1 connectors (support additional 4 USB 3.1
Gen1 ports) y 1x 4-pin CPU fan connector y 1x 4-pin water pump fan connector y
4x 4-pin system fan connectors y
1x Front panel audio connector y 2x Front panel connectors y 1x TPM module connector y
1x Chassis Intrusion connector y
1x Serial port connector y 1x Parallel port connector y 1x Thunderbolt add-on card connector y
1x RGB LED connector y
1x Clear CMOS jumper
NUVOTON NCT6795 Controller Chip
Continued on next page
Specifications
17
Hardware Monitor
Form Factor
BIOS Features
Software
Continued from previous page y CPU/System temperature detection y CPU/System fan speed detection y
CPU/System fan speed control y
ATX Form Factor y
12 in. x 9.6 in. (30.4 cm x 24.3 cm) y
1x 128 Mb flash y
UEFI AMI BIOS y ACPI 6.0 , SMBIOS 3.0
y Multi-language y Drivers y APP MANAGER y
SUPER CHARGER y
COMMAND CENTER y LIVE UPDATE 6 y MSI SMART TOOL y
RAMDISK y DPC LATENCY TUNER y FAST BOOT y X-BOOST y
MYSTIC LIGHT y NETWORK MANAGER y CPU-Z MSI GAMING y Intel ® Extreme Tuning Utility y
Norton™ Internet Security Solution y Google Chrome™ ,Google Toolbar, Google Drive
Continued on next page
18
Specifications
Special
Features
Continued from previous page y Audio
Audio Boost y
Network
Intel LAN with Network Manager y Storage
Twin Turbo M.2
y
Fan
Pump Fan
Smart Fan Control y LED
Mystic Light
Mystic Light Extension (RGB)
Mystic light SYNC
EZ DEBUG LED y
Protection
PCI-E Steel Armor y Performance
Multi GPU – CrossFire Technology
DDR4 Boost
USB with type A+C
Lightning USB(3142) y Stability
Military Class 5 y VR
VR Ready y BIOS
Click BIOS 5 y Certification
Quadro Ready
Specifications
19
Block Diagram
VGA DVI-D
PCI Express Bus
CPU
PCIe x16 slot
(support x4 mode)
Switch
2x M.2
Switch
6x SATA 6Gb/s
8x USB 3.1 Gen1
6x USB 2.0
DMI 3.0
Z370
LPC Bus
NV6795
Super I/O
P/S2 Mouse / Keyboard
Dual Channel DDR4 Memory x1 x1
PCIe x1 slot
Switch x1
PCIe x1 slot
PCIe x1 slot
Switch
PCI slot
PCI-E Bus x2
ASMEDIA
ASM3142
2 x USB 3.1 Gen2
Realtek
ALC887
Audio Jacks
20
Block Diagram
Rear I/O Panel
PS/2
VGA
LAN
Line-out
Line-in
USB 3.1 Gen2
USB 2.0
DVI-D USB 3.1 Gen1
USB 3.1
Gen2
Type-C
Mic in
LAN Port LED Status Table
Link/ Activity LED
Status Description
Off
Yellow
Blinking
No link
Linked
Data activity
Speed LED
Status Description
Off
Green
Orange
10 Mbps connection
100 Mbps connection
1 Gbps connection
Realtek HD Audio Manager
After installing the Realtek HD Audio driver, the Realtek HD Audio Manager icon will appear in the system tray. Double click on the icon to launch.
Device
Selection
Advanced
Settings
Jack Status
Application
Enhancement
Main Volume Connector
Settings
Profiles
Rear I/O Panel
21
y Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
y Application Enhancement - the array of options will provide you a complete guidance of anticipated sound effect for both output and input device.
y Main Volume - controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar.
y Profiles - toggles between profiles.
y
Advanced Settings streams.
- provides the mechanism to deal with 2 independent audio y
Jack Status computer.
- depicts all render and capture devices currently connected with your y
Connector Settings - configures the connection settings.
Auto popup dialog
When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.
Each jack corresponds to its default setting as shown on the next page.
22
Rear I/O Panel
Overview of Components
M2_1
PCI_E1
PCI_E2
JBAT1
PCI_E3
JCI1
PCI_E4
M2_2
PCI_E5
JTPM1
PCI1
CPU_PWR1
CPU Socket
SYS_FAN1
DIMMA1
CPU_FAN1
DIMMA2
DIMMB1
DIMMB2
PUMP_FAN1
SYS_FAN2
SYS_FAN3
EZ Debug LED
ATX_PWR1
JUSB1
JUSB2
SATA ▼ 1 ▲ 2
SATA4
SATA ▼ 5 ▲ 6
SATA3
JTBT1
JAUD1
SYS_FAN4
JRGB1
JCOM1
JLPT1
JUSB4
JUSB3
JFP2
JFP1
Overview of Components
23
Component Contents
Port Name
CPU_PWR1, ATX_PWR1 Power Connectors
DIMMA1, DIMMA2,
DIMMB1, DIMMB2
Port Type
Clear CMOS (Reset BIOS) Jumper
Thunderbolt Add-on Card Connector
Page
24
Overview of Components
CPU Socket
Introduction to the LGA 1151 CPU
The surface of the LGA 1151 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator.
Important y
Always unplug the power cord from the power outlet before installing or removing the CPU.
y
Please retain the CPU protective cap after installing the processor. MSI will deal with
Return Merchandise Authorization (RMA) requests if only the motherboard comes with the protective cap on the CPU socket.
y
When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability.
y
Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
y
Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
y
Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.
y
If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation.
y This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI ® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.
Overview of Components
25
DIMM Slots
DIMMA1 DIMMB1
Channel A
DIMMA2
Memory module installation recommendation
Channel B
DIMMB2
DIMMA2
DIMMB2
DIMMA2
DIMMB2
DIMMB1
DIMMA2
DIMMA1
Important y
Always insert memory modules in the DIMMA2 slot first.
y
Due to chipset resource usage, the available capacity of memory will be a little less than the amount of installed.
y
Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is suggested to protect the CPU.
y
Please note that the maximum capacity of addressable memory is 4GB or less for 32-bit Windows OS due to the memory address limitation. Therefore, we recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
y Some memory may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence
Detect (SPD). Go to BIOS and find the Memory Try It! to set the memory frequency if you want to operate the memory at the marked or at a higher frequency.
y
It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking.
y
The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking.
26
Overview of Components
PCI_E1~5, PCI1: PCIe/ PCI Expansion Slots
PCI_E1 : PCIe 3.0 x16 (CPU lanes)
PCI_E2 : PCIe 3.0 x1 (PCH lanes)
PCI_E3 : PCIe 3.0 x1 (PCH lanes)
PCI_E4 : PCIe 3.0 x4 (PCH lanes)
PCI_E5 : PCIe 3.0 x1 (PCH lanes)
PCI1 : PCI slot
Multiple graphics cards installation recommendation
x16 x16 x4
Important y The PCI_E4 slot will be unavailable when an M.2 PCIe SSD module has been installed in the M.2_2 slot.
y The PCI_E2/ PCI1 slot will be unavailable when an expansion card has been installed in the PCI_E3/ PCI_E5 slot.
y If you install a large and heavy graphics card, you need to use a tool such as MSI
Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot.
y
For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended.
y
When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card changes.
Overview of Components
27
M2_1~2: M.2 Slots (Key M)
M2_1
M2_2
Important
Intel ® RST only supports PCIe M.2 SSD with UEFI ROM, does not support Legacy ROM.
Video Demonstration
Watch the video to learn how to Install M.2 module.
http://youtu.be/JCTFABytrYA
Installing M.2 module
1. Remove the screw from the base screw.
2. Remove the base screw.
3. Tighten the base screw into the hole of the distance to the M.2 slot as the length your M.2 module.
4. Insert your M.2 module into the M.2 slot at a
30-degree angle.
5. Put the screw in the notch on the trailing edge of your M.2 module and tighten it into the base screw.
30 °
28
Overview of Components
SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one
SATA device.
SATA3
SATA4
SATA2
SATA1
SATA6
SATA5
Important y
The SATA1/ SATA5 port will be unavailable when an M.2 SATA SSD module has been installed in the M.2_1/ M.2_2 slot.
y
Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise.
y
SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
M.2 , SATA & PCIe combination table
Slot Available SATA connectors & PCIe slots
M2_1
M2_2
PCIe
PCIe
SATA
PCIe
PCIe
SATA
SATA
SATA
PCIe
Empty
SATA
Empty
Empty
PCIe
SATA1
SATA2
SATA3
SATA4
✓
✓
✓
✓
─
✓
✓
✓
✓
✓
✓
✓
─
✓
✓
✓
✓
✓
✓
✓
─
✓
✓
✓
SATA5
SATA6
PCI_E4
✓
✓
─
✓
✓
─
─
✓
✓
─
✓
✓
✓
✓
✓
✓
✓
✓
( SATA : M.2 SATA SSD, PCIe : M.2 PCIe SSD, ✓ : available, ─ : unavailable)
✓
✓
─
✓
✓
✓
✓
Empty
SATA
✓
✓
✓
✓
─
✓
✓
Overview of Components
29
M.2 slots with examples of various combination possibilities
2xM.2 PCIe SSDs + 6xSATA HDDs 2xM.2 SATA SSDs + 4xSATA HDDs
PCIe
PCIe
1xM.2 SATA SSD + 1xM.2 PCIe SSD +
5xSATA HDDs
SATA
SATA
1xM.2 PCIe SSD + 6xSATA HDDs
PCIe
SATA
PCIe
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
2 10
JFP1
1 9
1
3
5
7
9
HDD LED +
HDD LED -
Reset Switch
Reset Switch
Reserved
2
4
6
8
10
Power LED +
Power LED -
Power Switch
Power Switch
No Pin
1
JFP2
1
3
Speaker -
Buzzer -
2
4
Buzzer +
Speaker +
30
Overview of Components
CPU_PWR1, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.
1
2
3
4
8
4
Ground
Ground
Ground
Ground
5
1
CPU_PWR1
5
6
7
8
+12V
+12V
+12V
+12V
12
1
24
13
ATX_PWR1
6
7
4
5
8
9
1
2
3
10
11
12
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PWR OK
5VSB
+12V
+12V
+3.3V
18
19
16
17
20
21
13
14
15
22
23
24
Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.
+3.3V
-12V
Ground
PS-ON#
Ground
Ground
Ground
Res
+5V
+5V
+5V
Ground
JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.
2 10
5
7
1
3
9
DCD
SOUT
Ground
RTS
RI
1
6
8
2
4
10
9
SIN
DTR
DSR
CTS
No Pin
Overview of Components
31
JUSB1, JUSB2: USB 3.1 Gen1 Connectors
These connectors allow you to connect USB 3.1 Gen1 ports on the front panel.
10 11
1 20
1
6
7
8
4
5
2
3
9
10
Power
USB3_RX_DN
USB3_RX_DP
Ground
USB3_TX_C_DN
USB3_TX_C_DP
Ground
USB2.0-
USB2.0+
NC
11
16
17
18
14
15
12
13
19
20
USB2.0+
USB2.0-
Ground
USB3_TX_C_DP
USB3_TX_C_DN
Ground
USB3_RX_DP
USB3_RX_DN
Power
No Pin
Important
Note that the Power and Ground pins must be connected correctly to avoid possible damage.
JUSB3, JUSB4: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
2 10
1 9
1
3
5
7
9
VCC
USB0-
USB0+
Ground
No Pin
2
4
6
8
10
VCC
USB1-
USB1+
Ground
NC
Important y
Note that the VCC and Ground pins must be connected correctly to avoid possible damage.
y
In order to recharge your iPad,iPhone and iPod through USB ports, please install
MSI ® SUPER CHARGER utility.
32
Overview of Components
CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode.
PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage.
When you plug a 3-pin (Non-PWM) fan to a fan connector in PWM mode, the fan speed will always maintain at 100%, which might create a lot of noise. You can follow the instruction below to adjust the fan connector to PWM or DC Mode.
Default PWM Mode fan connectors
1
CPU_FAN1/ PUMP_FAN1
Default DC Mode fan connectors
1
SYS_FAN1/ SYS_FAN2/ SYS_FAN3
1
SYS_FAN4
Switching fan mode and adjusting fan speed
You can switch between PWM mode and DC mode and adjust fan speed in BIOS >
HARDWARE MONITOR .
Select PWM mode or DC mode
There are gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.
Important
Make sure fans are working properly after switching the PWM/ DC mode.
Pin definition of fan connectors
1
3
PWM Mode pin definition
Ground
Sense
2
4
+12V
Speed Control Signal
1
3
DC Mode pin definition
Ground
Sense
2
4
Voltage Control
NC
Overview of Components
33
JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.
2 10
5
7
1
3
9
MIC L
MIC R
Head Phone R
SENSE_SEND
Head Phone L
1
6
8
2
4
10
9
Ground
NC
MIC Detection
No Pin
Head Phone Detection
JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.
Normal
(default)
Trigger the chassis intrusion event
Using chassis intrusion detector
1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis.
2. Close the chassis cover.
3. Go to BIOS > Settings > Security > Chassis Intrusion Configuration .
4. Set Chassis Intrusion to Enabled .
5. Press F10 to save and exit and then press the Enter key to select Yes .
6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on.
Resetting the chassis intrusion warning
1. Go to BIOS > Settings > Security > Chassis Intrusion Configuration .
2. Set Chassis Intrusion to Reset .
3. Press F10 to save and exit and then press the Enter key to select Yes .
34
Overview of Components
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.
2 14
9
11
13
5
7
1
3
1
LPC Clock
LPC Reset
LPC address & data pin0
LPC address & data pin1
LPC address & data pin2
LPC address & data pin3
LPC Frame
13
10
12
14
6
8
2
4
3V Standby power
3.3V Power
Serial IRQ
5V Power
No Pin
Ground
Ground
JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumper to clear the CMOS memory.
Keep Data
(default)
Clear CMOS/
Reset BIOS
Resetting BIOS to default values
1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.
Overview of Components
35
JLPT1: Parallel Port Connector
This connector allows you to connect the optional parallel port with bracket.
2 26
1
13
16
7
10
19
22
1
4
25
RSTB#
ERR#
PRND2
Ground
PRND5
Ground
ACK#
Ground
SLCT
14
17
8
11
20
23
2
5
26
AFD#
PRND1
LPT_SLIN#
PRND4
Ground
PRND7
Ground
PE
No Pin
25
15
18
9
12
21
24
3
6
PRND0
PINIT#
PRND3
Ground
PRND6
Ground
BUSY
Ground
JTBT1: Thunderbolt Add-on Card Connector
This connector allows you to connect the add-on Thunderbolt I/O card.
1
1
3
5
FORCE_PWR
SLP_S3#
GND
2
4
SCI_EVENT
SLP_S5#
36
Overview of Components
JRGB1: RGB LED connector
These connectors allow you to connect the 5050 RGB LED strips.
1
3
+12V
R
1
2
4
G
B
1
5050 LED strip
Extension cable
JRGB1
Video Demonstration
Watch the video to learn how to install 5050 RGB LED strips to RGB LED connector.
https://youtu.be/CqNHyADzd2Q
Important y
This connector supports 5050 RGB multi-color LED strips (12V/G/R/B) with the maximum power rating of 3A (12V). Please keeping the LED strip shorter than 2 meters to prevent dimming.
y
Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip.
y
Please use MSI ’
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected or fail.
Overview of Components
37
BIOS Setup
The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.
Important y BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
y
The pictures in this chapter are for reference only and may vary from the product you purchased.
Entering BIOS Setup
Please refer the following methods to enter BIOS setup. y Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot
Menu message appears on the screen during the boot process.
y Use MSI FAST BOOT application. Click on GO2BIOS system will reboot and enter BIOS setup directly.
button and choose OK . The
Click on GO2BIOS
Function key
F1 : General Help
F2 : Add/ Remove a favorite item
F3 : Enter Favorites menu
F4 : Enter CPU Specifications menu
F5 : Enter Memory-Z menu
F6 : Load optimized defaults
F7 : Switch between Advanced mode and EZ mode
F8 : Load Overclocking Profile
F9 : Save Overclocking Profile
F10 : Save Change and Reset*
F12 : Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).
Ctrl+F : Enter Search page
* When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.
38
BIOS Setup
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS: y Go to BIOS and press F6 to load optimized defaults.
y Short the Clear CMOS jumper on the motherboard.
Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear
CMOS jumper section for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1. Press Del key to enter the BIOS Setup during POST.
2. Insert the USB flash drive that contains the update file into the computer.
3. Select the M-FLASH tab and click on Yes to reboot the system and enter the flash mode.
4. Select a BIOS file to perform the BIOS update process.
5. After the flashing process is 100% completed, the system will reboot automatically.
Updating the BIOS with Live Update 6
Before updating:
Make sure the LAN driver is already installed and the Internet connection is set properly.
Updating BIOS:
1. Install and launch MSI LIVE UPDATE 6.
2. Select BIOS Update .
3. Click on Scan button.
4. Click on Download icon to download and install the latest BIOS file.
5. Click Next and choose In Windows mode . And then click Next and Start to start updating BIOS.
6. After the flashing process is 100% completed, the system will restart automatically.
BIOS Setup
39
EZ Mode
At EZ mode, it provides the basic system information and allows you to configure the basic setting. To configure the advanced BIOS settings, please enter the Advanced
Mode by pressing the Setup Mode switch or F7 function key.
XMP switch Setup Mode switch Screenshot Search
Language
System information
OC GENIE 4 switch
Information display
Boot device priority bar
M-Flash
Favorites
Hardware
Monitor
Function buttons y OC GENIE 4 switch - click on it to toggle the OC GENIE 4 for OC.
Important
Please don ’ ’
OC GENIE 4 function.
y XMP switch - click on the inner circle to enable/ disable the X.M.P. (Extreme Memory
Profile). Switch the outer circle to select the X.M.P. profile. This switch will only be available if the X.M.P. supported memory module is installed.
y Setup Mode switch and EZ mode.
- press this tab or the F7 key to switch between Advanced mode y Screenshot - click on this tab or the flash drive (FAT/ FAT32 format only).
F12 key to take a screenshot and save it to USB y Search - click on this tab or the Ctrl+F keys and the search page will show. It allows you to search by BIOS item name, enter the item name to find the item listing. Move the mouse over a blank space and right click the mouse to exit search page.
Important
In search page, only the F6, F10 and F12 function keys are available. y Language - allows you to select the language of BIOS setup.
y
System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU type, memory size, CPU/ DDR voltage, BIOS version and build date. y
Boot device priority bar - you can move the device icons to change the boot priority.
The boot priority from high to low is left to right.
40
BIOS Setup
y Information display - click on the CPU , Memory on left side to display related information.
, Storage , Fan Info and Help buttons y Function buttons - enable or disable the LAN Option ROM, M.2/Optane Genie,
Hardcore Mode, AHCI, RAID, CPU Fan Fail Warning Control and BIOS Log Review by clicking on their respective button.
Hardcore Mode - always keep the CPU in full speed mode to maximize system performance. This feature will increase power consumption.
y M-Flash - click on this button to display the update BIOS with a USB flash drive.
M-Flash menu that provides the way to y Hardware Monitor - click on this button to display the Hardware Monitor allows you to manually control the fan speed by percentage.
menu that y Favorites - press the Favorites tab or the F3 key to enter Favorites menu. It allows you to create personal BIOS menu where you can save and access favorite/ frequentlyused BIOS setting items.
Default HomePage - allows you to select a BIOS menu (e.g. SETTINGS, OC...,etc) as the BIOS home page.
Favorite1~5 in one page.
- allows you to add the frequently-used/ favorite BIOS setting items
To add a BIOS item to a favorite page (Favorite 1~5)
1. Move the mouse over a BIOS item not only on BIOS menu but also on search page.
2. Right-click or press F2 key.
3. Choose a favorite page and click on OK.
To delete a BIOS item from favorite page
1. Move the mouse over a BIOS item on favorite page (Favorite 1~5)
2. Right-click or press F2 key.
3. Choose Delete and click on OK .
BIOS Setup
41
Advanced Mode
Press Setup Mode switch or F7 function key can switch between EZ Mode and
Advanced Mode in BIOS setup.
XMP switch Setup Mode switch Screenshot Search
Language
System information
OC GENIE 4 switch
Boot device priority bar
BIOS menu selection
BIOS menu selection
Menu display y
OC GENIE 4 switch/ XMP switch/ Setup Mode switch/ Screenshot/ Language/
System information/ Boot device priority bar - please refer to the descriptions of EZ
Mode Overview section.
y
BIOS menu selection - the following options are available:
SETTINGS - allows you to specify the parameters for chipset and boot devices.
OC - allows you to adjust the frequency and voltage. Increasing the frequency may get better performance.
M-FLASH - provides the way to update BIOS with a USB flash drive.
OC PROFILE - allows you to manage overclocking profiles.
HARDWARE MONITOR of system.
- allows you to set the speeds of fans and monitor voltages
BOARD EXPLORER motherboard.
- provides the information of installed devices on this y
Menu display - provides BIOS setting items and information to be configured.
42
BIOS Setup
SETTINGS
System Status
f System Date
Sets the system date. Use tab key to switch between date elements.
The format is <day> <month> <date> <year>.
<day>
<month>
<date>
<year>
Day of the week, from Sun to Sat, determined by BIOS. Read-only.
The month from Jan. through Dec.
The date from 1 to 31 can be keyed by numeric function keys.
The year can be adjusted by users. f System Time
Sets the system time. Use tab key to switch between time elements.
The time format is <hour> <minute> <second>. f SATA PortX
Shows the information of connected SATA device.
Important
If the connected SATA device is not displayed, turn off computer and re-check SATA cable and power cable connections of the device and motherboard.
f System Information
Shows detailed system information, including CPU type, BIOS version, and Memory
(read only).
f DMI Information
Shows system information, desktop Board Information and chassis Information. (Read only).
Advanced
f PCI Subsystem Settings
Sets PCI, PCI express interface protocol and latency timer. Press Enter to enter the sub-menu.
BIOS Setup
43
f PEG X - Max Link Speed [Auto]
Sets PCI Express protocol of PCIe x16 slots for matching different installed devices.
[Auto]
[Gen1]
This item will be configured automatically by BIOS.
Enables PCIe Gen1 support only.
[Gen2]
[Gen3]
Enables PCIe Gen2 support only.
Enables PCIe Gen3 support only.
f PCI Latency Timer [32]
Sets latency timer of PCI interface device.
[Options: 32, 64, 96, 128, 160, 192, 224, 248 PCI Bus clocks] f Above 4G memory/ Crypto Currency mining [Disabled]
Enables or disables 64-bit capable devices to be decoded in above 4G address space. It is only available if the system supports 64-bit PCI decoding.
[Enabled] Allows you to utilize more than 4x GPUs.
[Disabled] Disables this function.
f ACPI Settings
Sets ACPI parameters of onboard power LED behaviors. Press Enter to enter the submenu. f Power LED [Blinking]
Sets shining behaviors of the onboard Power LED.
[Dual Color] The power LED turns to another color to indicate the S3 state.
[Blinking] The power LED blinks to indicate the S3 state.
f Integrated Peripherals
Sets integrated peripherals' parameters, such as LAN, HDD, USB and audio. Press
Enter to enter the sub-menu. f Onboard LAN Controller [Enabled]
Enables or disables the onboard LAN controller.
f LAN Option ROM [Disabled]
Enables or disables the legacy network Boot Option ROM for detailed settings. This item will appear when Onboard LAN Controller is enabled.
[Enabled] Enables the onboard LAN Boot ROM.
[Disabled] Disables the onboard LAN Boot ROM.
f Network Stack [Disabled]
Sets UEFI network stack for optimizing IPv4 / IPv6 function.
[Enabled] Enables UEFI network stack.
[Disabled] Disables UEFI network stack.
f Ipv4 PXE Support [Enabled]
When Enabled , the system UEFI network stack will support Ipv4 protocol. This item will appear when Network Stack is enabled.
[Enabled] Enables the Ipv4 PXE boot support.
[Disabled] Disables the Ipv4 PXE boot support.
44
BIOS Setup
f Ipv6 PXE Support [Enabled]
When Enabled , the system UEFI network stack will support Ipv6 protocol. This item will appear when Network Stack is enabled.
[Enabled] Enables the Ipv6 PXE boot support.
[Disabled] Disables the Ipv6 PXE boot support.
f SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI
(Advanced Host Controller Interface) offers some advanced features to enhance the speed and performance of SATA storage device, such as Native Command Queuing (NCQ) and hot-plugging.
[RAID/Optane Mode] Enables RAID function for SATA storage devices and Optane function for NVMe or PCIe storage devices.
f M2_1/ M2_2-RST Pcie Storage Remapping [Disabled]
Enables or disables Intel Rapid Storage Technology for M.2 PCIe devices. f M.2 Genie [Disabled]
Enables or disables M.2 storage to build RAID volume. f SATAx Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support.
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
f HD Audio Controller [Enabled]
Enables or disables the onboard High Definition Audio controller.
f HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
f Integrated Graphics Configuration
Adjusts integrated graphics settings for optimum system. Press Enter to enter the sub-menu.
f Initiate Graphic Adapter [PEG]
Selects a graphics device as the primary boot device.
[IGD] Integrated Graphics Display.
[PEG] PCI-Express Graphics Device.
f Integrated Graphics Share Memory [64M]
Selects a fixed amount of system memory allocated to the onboard graphics. This item will appear when IGD Multi-Monitor is enabled. f IGD Multi-Monitor [Disabled]
Enables or disables the multi-screen output from integrated graphics and external graphics card. This item appears when Initiate Graphic Adapter set to PEG.
[Enabled] Enables multi-screen function for both integrated and external graphics cards.
[Disabled] Disables this function.
BIOS Setup
45
f Intel(R) Thunderbolt [Fully Disabled] f Thunderbolt(TM) Support
Enables or disables Thunderbolt™ support.
f USB Configuration
Sets the onboard USB controller and device function. Press Enter to enter the submenu. f USB Controller [Enabled]
Enables or disables all USB controller.
f XHCI Hand-off [Diasbled]
Enables or disables XHCI hand-off support for the operating system without XHCI hand-off feature. f Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected and enable the legacy USB support.
[Enabled] Enable the USB support under legacy mode.
[Disabled] The USB devices will be unavailable under legacy mode.
f Super IO Configuration
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter> to enter the sub-menu.
f Serial (COM) Port x Configuration
Sets detailed configuration of serial(COM) port x. Press <Enter> to enter the submenu.
f Serial (COM) Port x [Enabled]
Enables or disables serial (COM) port x.
f Serial (COM) Port x Settings [Auto]
Sets serial port x (COM). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually.
f Parallel (LPT) Port Configuration
Sets detailed configuration of parallel port (LPT). Press <Enter> to enter the submenu.
f Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
f Parallel (LPT) Port Settings [Auto]
Sets parallel port (LPT). If set to Auto, BIOS will optimize the IRQ automatically or you can set it manually.
46
BIOS Setup
f Device Mode [STD Printer Mode]
Selects an operating mode for parallel port.
[STD Printer Mode]
[SPP]
Printer port mode
Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP]
[ECP]
[ECP + EPP-1.9/ 1.7]
Enhanced Parallel Port-1.9/ 1.7 mode + Standard
Parallel Port mode.
Extended Capability Port mode
Extended Capability Port mode + Enhanced Parallel
Port-1.9/ 1.7 mode.
f Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
Enter to enter the sub-menu. f ErP Ready [Disabled]
Enables or disables the system power consumption according to ErP regulation.
[Enabled] Optimize the system power consumption according to ErP regulation. It will not support S4 & S5 wake up by USB, PCI and PCIe devices.
[Disabled] Disables this function. f Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power Off] Leaves the system in power off state after restoring AC power.
[Power On] Boot up the system after restoring AC power.
[Last State] Restores the system to the previous state (power on/ power off) before AC power loss.
f System Power Fault Protection [Disabled]
Enables or disables the system to boot up when detecting abnormal voltage input.
[Enabled] Protect the system from unexpected power operation and remain the shut down status.
[Disabled] Disables this function.
f Windows OS Configuration
Sets Windows OS detailed configuration and behaviors. Press Enter to enter the submenu. f Windows 10 WHQL Support [Disabled]
Enables the supports for Windows 10 or disables for other operating systems.
Before enabling this item, make sure all installed devices & utilities (hardware & software) should meet the Windows 10 requirements.
[Enabled] The system will switch to UEFI mode to meet the Windows equirement.
[Disabled] Disables this function.
BIOS Setup
47
f MSI Fast Boot [Disabled]
MSI Fast Boot is the fastest way to boot the system. It will disable more devices to speed up system boot time which is faster than the boot time of Fast Boot .
[Enabled] Enables the MSI Fast Boot function to speed up booting time. And the following Fast Boot field will be disabled and fixed.
[Disabled] Disables MSI Fast Boot.
Important
When MSI Fast Boot is enabled, you can use MSI FAST BOOT application to enter BIOS setup if needed. Please refer Entering BIOS Setup section for details. f Fast Boot [Enabled/ windows 10, Disabled/ windows7]
Enables or disables the fast boot feature for Windows 10. This item will only be available when MSI Fast Boot is disabled.
[Enabled] Enables the Fast Boot configuration to accelerate system boot time.
[Disabled] Disables the Fast Boot configuration.
f Internal GOP Configuration
Manages the onboard Graphics Output Protocol (GOP). Press Enter to enter the sub-menu. This sub-menu will appear when Windows 10 WHQL Support is enabled.
f Secure Boot
Sets the Windows secure boot to prevent the unauthorized accessing. Press Enter to enter the sub-menu. This sub-menu will appear when Windows 10 WHQL
Support is enabled.
f Secure Boot Support [Disabled]
Enables or disables secure boot support.
[Enabled] Enables the secure boot function and allow you to set the secure boot settings.
[Disabled] Disables this function.
f Secure Boot Mode [Standard]
Selects the secure boot mode. This item is to select how the secure boot keys be loaded. This item appears when Secure Boot Support is enabled.
[Standard] The system will automatically load the secure keys from BIOS.
[Custom] Allows user to configure the secure boot settings and manually load the secure keys.
f Key Management
Manages the secure boot keys. Press <Enter> to enter the sub-menu. This submenu will appear when Secure Boot Mode sets to Custom .
f Wake Up Event Setup
Sets system wake up behaviors for different sleep modes. Press Enter to enter the sub-menu.
48
BIOS Setup
f Wake Up Event By [BIOS]
Selects the wake up event by BIOS or operating system.
[BIOS]
[OS]
Activates the following items, set wake up events of these items.
The wake up events will be defined by OS.
f Resume By RTC Alarm [Disabled]
Disables or enables the system wake up by RTC Alarm.
[Enabled] Enables the system to boot up on a scheduled time/ date.
[Disabled] Disables this function.
f Date (of month) Alarm/ Time (hh:mm:ss) Alarm
Sets RTC alarm date/ Time. If Resume By RTC Alarm is set to [Enabled], the system will automatically resume (boot up) on a specified date/hour/minute/second in these fields (using the + and keys to select the date & time settings).
f Resume By PCI-E Device [Disabled]
Enables or disables the wake up function of installed PCI-E expansion cards, integrated LAN controllers or USB devices which are supported by third party integrated chips.
[Enabled] Enables the system to be awakened from the power saving modes when activity or input signal of PCIe device is detected.
[Disabled] Disables this function.
f Resume By Onboard Intel LAN [Disabled]
Enables or disables the system wake up by Onboard Intel LAN.
[Enabled] Enables the system to be awakened from the power saving modes when activity or input signal of Intel LAN device is detected.
[Disabled] Disables this function.
f Resume by USB Device [Disabled]
Enables or disables the system wake up by USB devices.
[Enabled] Enables the system to be awakened from sleep state when activity of
USB device is detected.
[Disabled] Disables this function.
f Resume From S3/S4/S5 by PS/2 Mouse [Disabled]
Enables or disables the system wake up by PS/2 mouse.
[Enabled] Enables the system to be awakened from S3/ S4/ S5 state when activity of PS/2 mouse is detected.
[Disabled] Disables this function.
f Resume From S3/S4/S5 by PS/2 Keyboard [Disabled]
Enables or disables the system wake up by PS/2 keyboard.
[Any Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of any key on PS/2 keyboard is detected.
[Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of hot key on PS/2 keyboard is detected.
[Disabled] Disables this function.
BIOS Setup
49
f Hot Key [Ctrl+Space]
Selects a combination of keys as a hot key to wake the system. This item appears when you set the Resume From S3/S4/S5 by PS/2 Keyboard to Hot Key .
f Intel ( R ) Ethernet Connection 1219-V -(MAC
Shows driver information and configuration of the ethernet controller parameter.
Boot
Sets the sequence of system boot devices.
f Full Screen Logo Display [Enabled]
Enables or disables to show the full screen logo while system POST.
[Enabled] Shows the logo in full screen.
[Disabled] Shows the POST messages.
f GO2BIOS [Disabled]
Allows system to enter BIOS setup directly by pressing the Power button for 4 sec pon bootup.
[Enabled] The system boots straight to the BIOS setup by long pressing the power button about 4 seconds when the system is off.
[Disabled] Disables this function.
f Bootup NumLock State [On]
Select the keyboard NumLock state upon bootup.
f Info Block effect [Unlock]
Sets the state of Help information block.
[Unlock]
[Lock]
Sliding effect.
Fix the Help information block on the screen.
f AUTO CLR_CMOS [Disabled]
Enables or disables the CMOS data to be resumed automatically when the booting process hang-up over 5 seconds.
f Boot Mode Select [LEGACY+UEFI]
Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement. This item will become un-selectable and will be configured automatically by BIOS when Windows 10 WHQL Support is enabled.
[UEFI] Enables UEFI BIOS boot mode support only.
[LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot
mode.
f FIXED BOOT ORDER Priorities
Sets device priority for system boot.
f Boot Option Priorities
These items are used to prioritize the installed boot devices.
50
BIOS Setup
Security
f Administrator Password
Sets administrator password for system security. User has full rights to change the
BIOS items with administrator password. After setting the administrator password, the state of this item will show Installed ” f User Password
Sets User Password for system security. User has limited rights to change the BIOS items with user password. This item will be available when administrator password is set. After setting the user password, the state of this item will show Installed ” f Password Check [Setup]
Selects a condition that will request the password.
[Setup]
[Boot]
A password will be requested for entering the BIOS Setup.
A password will be requested for booting the system .
f Password Clear [Enabled]
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept .
Important
When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press <Enter>. The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization.
f Trusted Computing
Sets TPM (Trusted Platform Module) function. f Security Device Support [Disabled]
Enables or disables the TPM function to build the endorsement key for accessing the system.
f Chassis Intrusion Configuration
Press <Enter> to enter the sub-menu. f Chassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function is ready for the chassis equips a chassis intrusion switch.
[Enabled]
[Reset]
Once the chassis is opened, the system will record and issue a warning message.
Clear the warning message. After clearing the message, please return to Enabled or Disabled .
[Disabled] Disables this funcion.
BIOS Setup
51
Save & Exit
f Discard Changes and Exit
Exit BIOS setup without saving any change. f Save Changes and Reboot
Save all changes and reboot the system. f Save Changes
Save current changes.
f Discard Changes
Discard all changes and restore to the previous values.
f Restore Defaults
Restore or load all default values.
f Boot Override
The installed bootable devices will appear on this menu, you can select one of them to be the boot device.
52
BIOS Setup
OC
Important y
Overclocking your PC manually is only recommended for advanced users.
y Overclocking is not guaranteed, and if done improperly, it could void your warranty or severely damage your hardware.
y If you are unfamiliar with overclocking, we advise you to use easy overclocking.
OC GENIE 4 function for f OC Explore Mode [Normal]
Enables or disables to show the normal or expert version of OC settings.
[Normal]
[Expert]
Provides the regular OC settings in BIOS setup.
Provides the advanced OC settings for OC expert to configure in BIOS setup.
Note: We use * as the symbol for the OC settings of Expert mode.
f CPU Ratio Apply Mode [All Core]*
Sets applied mode for CPU ratio. This item only appears when a CPU that supports
Turbo Boost is installed.
[All Core] Activate the CPU Ratio field. All CPU cores will run the same CPU ratio that be set in CPU Ratio .
[Per Core] Activate the X-Core Ratio Limit field. Sets each CPU core ratio separately in X-Core Ratio Limit . f CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function.
f 1/2/3/4-Core Ratio Limit [Auto]*
Allows you to set the CPU ratios for different number of active cores. These items only appear when a CPU that support this function is installed. f Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
BIOS Setup
53
f CPU Ratio Mode [Dynamic Mode]*
Selects the CPU Ratio operating mode. This item will appear when you set the CPU ratio manually.
[Fixed Mode] Fixes the CPU ratio.
[Dynamic Mode] CPU ratio will be changed dynamically according to the CPU
loading.
f Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU. f Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
f GT Ratio [Auto]
Sets the integrated graphics ratio. The valid value range depends on the installed
CPU. f Adjusted GT Frequency
Shows the adjusted integrated graphics frequency. Read-only.
f Misc Setting*
Press Enter, + or - key to open or close the following 3 items related to CPU features. f EIST [Enabled]*
Enables or disables the Enhanced Intel ® SpeedStep Technology.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production.
[Disabled] Disables EIST. f Intel Turbo Boost [Enabled]*
Enables or disables the Intel ® Turbo Boost. This item appears when the installed
CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically above rated specifications when system request the highest performance state.
[Disabled] Disables this function.
f Enhanced Turbo [Auto]*
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance. This item appears when the installed CPU supports this function.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
54
BIOS Setup
f CPU Base Clock (MHz)
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please note that overclocking behavior and stability is not guaranteed. This item appears when the installed processor supports this function. f CPU Base Clock Apply Mode [Auto]*
Sets the applying mode for adjusted CPU base clock.
[Auto] This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
f Extreme Memory Profile (X.M.P.) [Disabled]
X.M.P. (Extreme Memory Profile) is the overclocking technology by memory module.
Please enable XMP or select a profile of memory module for overclocking the memory.
This item will be available when the memory modules that support X.M.P. is installed.
f DRAM Reference Clock [Auto]*
Sets the DRAM reference clock. The valid value range depends on the installed CPU.
This item appears when a CPU that supports this adjustment is installed. f DRAM Frequency [Auto]
Sets the DRAM frequency. Please note the overclocking behavior is not guaranteed.
f Adjusted DRAM Frequency
Shows the adjusted DRAM frequency. Read-only. f Memory Try It ! [Disabled]
It improve memory compatibility or performance by choosing optimized memory preset.
f DRAM Timing Mode [Link]
Selects the memory timing mode.
[Link]
[UnLink]
Allows user to configure the DRAM timing for all memory channel.
Allows user to configure the DRAM timing for respective memory channel. f Advanced DRAM Configuration
Press Enter to enter the sub-menu. User can set the memory timing for each/ all memory channel. The system may become un-stable or un-bootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.)
BIOS Setup
55
f Memory Fast Boot [Auto]*
Enables or disables the initiation and training for memory every booting.
[Auto] The setting will be configured automatically by BIOS.
[Enabled] System will completely keep the archives of first intiation and training for memory. So the memory will not be initialed and trained when booting to accelerate the system booting time.
[Disabled] The memory will be initialed and trained every booting. f DigitALL Power
Press Enter to enter the sub-menu. Controls the digital powers related to CPU PWM.
f CPU Loadline Calibration Control [Auto]
The CPU voltage will decrease proportionally according to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increase the temperature of the CPU and VRM. If set to Auto , BIOS will configure this setting automatically.
f CPU Over Voltage Protection [Auto]
Sets the voltage limit for CPU over-voltage protection. If set to Auto , BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU under-voltage protection. If set to Auto , BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f CPU Over Current Protection [Auto]
Sets the current limit for CPU over-current protection. If set to Auto , BIOS will configure this setting automatically. f CPU Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET before you increase the value. If set to Auto , BIOS will configure this setting automatically.
f CPU VRM Over Temperature Protection [Enabled]
Enables or disables the CPU VRM over temperature protection.
f CPU GT Loadline Calibration Control [Auto]
The voltage of the GPU embeeded in CPU will decrease proportionally according to GPU loading. Higher load-line calibration could get higher voltage and good overclocking performance, but increase the temperature of the CPU and VRM.
f CPU GT Over Voltage Protection [Auto]
Sets the voltage limit for CPU GT over-voltage protection. If set to Auto , BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
56
BIOS Setup
f CPU GT Under Voltage Protection [Auto]
Sets the voltage limit for CPU GT under-voltage protection. If set to Auto , BIOS will configure this setting automatically. Higher voltage provides less protection and may damage the system.
f CPU Lite Load [Auto]
This item is used to reduce the CPU power and temperature under nonoverclocking and non-overvoltage conditions. Select higher mode if system is unstable. Auto is the recommended. f CPU GT Over Current Protection [Auto]
Sets the current limit for CPU GT over-current protection. If set to Auto , BIOS will configure this setting automatically. f CPU GT Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU GT voltage and minimize ripple range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET before you increase the value. If set to Auto , BIOS will configure this setting automatically.
f CPU GT VRM Over Temperature Protection [Enabled]
Enables or disables the CPU GT VRM for over-temperature protection. The CPU GT frequency may be throttled when VRM temperature over the specified value. f CPU Core/ GT Voltage Mode [Auto]*
Sets the CPU Core/ GT voltage mode.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage offset
mode.
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the offset voltage.
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
f CPU Voltages control [Auto]
These options allow you to set the voltages related to CPU. If set to Auto , BIOS will set these voltages automatically or you can set it manually. f DRAM Voltages control [Auto]
These options allow you to set the voltages related to memory. If set to Auto , BIOS will set these voltages automatically or you can set it manually. f PCH Voltages control [Auto]
These options allow you to set the voltages related to PCH. If set to Auto , BIOS will set these voltages automatically or you can set it manually.
BIOS Setup
57
f CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and then you have to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
f OC Quick View Timer [3 Sec]*
Sets the duration of OC setting values showed on the screen. If set to Disabled, BIOS will not show the variations of OC setting.
f CPU Specifications
Press Enter to enter the sub-menu. This sub-menu displays the information of installed CPU. You can also access this information menu at any time by pressing [F4].
Read only.
f CPU Technology Support
Press Enter to enter the sub-menu. The sub-menu shows the key features of installed CPU. Read only.
f MEMORY-Z
Press Enter to enter the sub-menu. This sub-menu displays all the settings and timings of installed memory. You can also access this information menu at any time by pressing [F5]. f DIMMx Memory SPD
Press Enter to enter the sub-menu. The sub-menu displays the information of installed memory. Read only.
f CPU Features
Press Enter to enter the sub-menu.
f Hyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as multi logical processors that can execute instructions simultaneously. In this way, the system performance is highly improved. This item appears when the installed
CPU supports this technology.
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
f Active Processor Cores [All]
Allows you to select the number of active CPU cores. f Limit CPUID Maximum [Disabled]
Enables or disables the extended CPUID value.
[Enabled] BIOS limits the maximum CPUID input value to circumvent boot problems with older operating system that do not support the processor with extended CPUID value.
[Disabled] Use the actual maximum CPUID input value.
58
BIOS Setup
f Intel Virtualization Tech [Enabled]
Enables or disables Intel Virtualization technology.
[Enabled] Enables Intel Virtualization technology and allows a platform to run multiple operating systems in independent partitions. The system can function as multiple systems virtually.
[Disabled] Disables this function.
f Intel VT-D Tech [Disabled]
Enables or disables Intel VT-D (Intel Virtualization for Directed I/O) technology. f Hardware Prefetcher [Enabled]
Enables or disables the hardware prefetcher (MLC Streamer prefetcher).
[Enabled] Allows the hardware prefetcher to automatically pre-fetch data and instructions into L2 cache from memory for tuning the CPU performance.
[Disabled] Disables the hardware prefetcher.
f Adjacent Cache Line Prefetch [Enabled]
Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher).
[Enabled] Enables adjacent cache line prefetching for reducing the cache latency time and tuning the performance to the specific application.
[Disabled] Enables the requested cache line only.
f CPU AES Instructions [Enabled]
Enables or disables the CPU AES (Advanced Encryption Standard-New
Instructions) support. This item appears when a CPU supports this function.
f Intel Adaptive Thermal Monitor [Enabled]
Enables or disables the Intel adaptive thermal monitor function to protect the CPU from overheating.
[Enabled] Throttles down the CPU core clock speed when the CPU is over the adaptive temperature.
[Disabled] Disables this function.
f Intel C-State [Auto]
Enables or disables the Intel C-state. C-state is a processor power management technology defined by ACPI.
[Auto]
[Enabled]
This setting will be configured automatically by BIOS.
Detects the idle state of system and reduce CPU power consumption accordingly.
[Disabled] Disable this function.
f C1E Support [Disabled]
Enables or disables the C1E function for power-saving in halt state. This item appears when Intel C-State is enabled.
[Enabled] Enables C1E function to reduce the CPU frequency and voltage for power-saving in halt state.
[Disabled] Disables this function.
BIOS Setup
59
f Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when system is idle. The options of C-state depend on the installed CPU. This item appears when
Intel C-State is enabled.
f CFG Lock [Enabled]
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit. f EIST [Enabled]
Enables or disables the Enhanced Intel ® SpeedStep Technology. This item will appear when OC Explore Mode is set to Normal .
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically. It can decrease average power consumption and average heat production.
[Disabled] Disables EIST. f Intel Turbo Boost [Enabled]
Enables or disables the Intel ® Turbo Boost. This item is for Normal mode and appears when a CPU that support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over specification when system request the highest performance state.
[Disabled] Disables this function.
f Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
f Long Duration Maintained (s) [Auto]
Sets the maintaining time for Long duration power Limit(W). f Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
f CPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the current is over the specified value, the CPU will automatically reduce the core frequency for reducing the current.
f FCLK Frequency [Auto]
Set FCLK Frequency for early power on. Lower FCLK frequency may help you to set higher base clock frequency.
f DMI Link Speed [Auto]
Sets DMI speed.
f SW Guard Extensions (SGX) [Software Control]
Enables or disables Intel SGX.
60
BIOS Setup
M-FLASH
M-FLASH provides the way to update BIOS with a USB flash drive. Please down-load the latest BIOS file that matches your motherboard model from MSI website, save the
BIOS file into your USB flash drive. And then follow the steps below to update BIOS.
1. Insert the USB flash drive that contains the update file into the computer.
2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to reboot and enter the flash mode.
3. The system will enter the flash mode and a file selection menu will appear after rebooting.
4. Select a BIOS file to perform the BIOS update process.
5. After the flashing process is 100% completed, the system will reboot automatically.
BIOS Setup
61
OC PROFILE
f Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press <Enter> to enter the submenu.
f Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Name the current overclocking profile. f Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Save the current overclocking profile.
f Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Load the current overclocking profile.
f Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6
Clear the current overclocking profile.
f OC Profile Load from ROM
Load OC profile from BIOS ROM.
f OC Profile Save to USB
Save OC profile to the USB flash drive. The USB flash drive should be FAT/ FAT32 format only.
f OC Profile Load from USB
Load OC profile from the USB flash drive. The USB flash drive should be FAT/ FAT32 format only.
62
BIOS Setup
HARDWARE MONITOR
Temperature
& Speed
Fan Manage
Setting
Buttons
Voltage display f Temperature & Speed
Shows the current CPU temperature, system temperature and fans' speeds.
f Fan Manage
PWM - allows you to select the PWM mode for fan operation.
DC - allows you to select the DC mode for fan operation.
Fan step up/ down time - allows you to set the period of fan step up/ down.
Smart Fan Mode field - allows you to drag the gradient points to configure the fan target values for Smart Fan mode. Smart Fan can control the fan speed automatically depending on the CPU temperature to keep it with in a specific range.
If the current CPU temperature reaches to the target value, the Smart Fan function will be activated.
Important y
The changing will achieve after you save the changes and reboot the system.
y
Make sure fans are working properly after switching the PWM/ DC mode.
f Settings Buttons
All Full Speed - configures all fans to run at full operating speed.
All Set Default - configures all fans to run at default operating speed.
All Set Cancel speeds .
- discards current changes and restores previous operating fan f Voltage display
Shows the current voltages of CPU, system and memory.
BIOS Setup
63
Software Description
Installing Windows
®
10
1. Power on the computer.
2. Insert the Windows ® 10 disc into your optical drive.
3. Press the Restart button on the computer case.
4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu.
5. Select your optical drive from the Boot Menu.
6. Press any key when screen shows Press any key to boot from CD or DVD... message.
7. Follow the instructions on the screen to install Windows ® 10.
Installing Drivers
1. Start up your computer in Windows ® 10.
2. Insert MSI ® Driver Disc into your optical drive.
3. The installer will automatically appear and it will find and list all necessary drivers.
4. Click Install button.
5. The software installation will then be in progress, after it has finished it will prompt you to restart.
6. Click OK button to finish.
7. Restart your computer.
Installing Utilities
Before you install utilities, you must complete drivers installation.
1. Insert MSI ® Driver Disc into your optical drive.
2. The installer will automatically appear.
3. Click Utilities tab.
4. Select the utilities you want to install.
5. Click Install button.
6. The utilities installation will then be in progress, after it has finished it will prompt you to restart.
7. Click OK button to finish.
8. Restart your computer.
64 Software Description
APP MANAGER
APP MANAGER is a handy management application for integration of MSI applications and software interface. Providing easy shortcut entrance and real-time update information of all the MSI software and applications.
APP list
Total Install/ Update
Motherboard
Information y APP list - shows all the applications and software be supported by this motherboard.
An icon represents a entrance to the application rather than the application itself.
Colorful icon - a colorful icon means that the application had have been installed successfully and is available. Double click on desired icon to access the application.
A refresh icon shows to inform you that the application has a update version.
Gray icon - the icon with gray painting means that the application is not available and you have to install it if needed. Double click on the gray icon and the update information will show. Click on the INSTALL button to install the application.
y
Motherboard Information - shows the model name of motherboard.
y Total Install/ Update - click on this tab to update/ install all the applications.
Important
Please note that, once you uninstall the APP MANAGER, all the MSI applications and software will be uninstalled simultaneously.
Software Description 65
LIVE UPDATE 6
LIVE UPDATE 6 is an application for the MSI ® system to scan and download the latest drivers, BIOS and utilities. With LIVE UPDATE 6, you don on websites, and don ’
’ t need to know the models of motherboard and graphics cards.
LIVE UPDATE 6 will download the appropriate drivers automatically.
Download Options
Download List
Scan / Download / Total
Installer button
System Information
Last Scanned Date
There are Live Update, History, Setting and System Information tabs at the top. You can click the tab to switch the control panel.
y
Live Update - When you launch LIVE UPDATE 6, you will see the Live update tab at first. This tab allows you to select files to download. You can also read the relevant information by clicking the information icon on the right of the item listed.
y History - shows the downloading history.
y
Setting update.
- allows you to specify the frequency that LIVE UPDATE 6 remind you to y
System Information - displays the information of the system.
y FAQ - shows Frequently Asked Questions.
y Online Help - shows Online Help information.
Updating The System
This section describes how to update your system with LIVE UPDATE 6. Please follow the steps below:
1
2
4
5
3
66 Software Description
1. Select the Live Update tab.
2. Choose Automatic scan , system will automatically scan all the items and search for the latest update files. Or you can choose Manual scan and select the items you wish to scan.
3. Click the Scan button at the bottom. It may take several moments to complete the process.
4. When the download list appears, please select the items you intend to update.
5. Click Download button at the bottom.
6. When Save Path prompt, you can specify a download directory.
7. When downloading you will see the screen below. It may take several moments to complete the process.
8. To install the applications, simply unpack the packages and install.
Total Installer
Total Installer is a convenient feature to simplify frequent installing procedure. To use
Total Installer:
2
3
1
1. Scan updates in Live Update tab.
2. Check the Select All check-box you intend to update.
3. Click the Total Installer button. LIVE UPDATE 6 will automatically install them.
4. When prompted, click OK to complete the Total Installer procedure
5. Reboot your system.
Software Description 67
COMMAND CENTER
COMMAND CENTER is an user-friendly software and exclusively developed by MSI, helping users to adjust system settings and monitor status under OS. With the help of COMMAND CENTER, making it possible to achieve easier and efficient monitoring process and adjustments than that under BIOS. In addition, the COMMAND CENTER can be a server for mobile remote control application.
System Information CPU Temperature
Feature Menu
Feature Title
Feature
Control Panel
Profile
Buttons
Next Feature
Previous
Feature
Option Buttons
Page Indicator
Resize Corner
Profile Buttons
y Default - load the default values for the current feature.
y Apply - apply your changes.
y Save - store values in the file with individual file extension.
y
Load - load the values from the file.
Important
Every time you shut down the system, the configured setting will be restored to the factory default. If you want to use the saved settings, you have to load it every time by clicking the Load and Apply buttons.
CPU Frequency
CPU Frequency control panel allows you to change
CPU Ratio and Base clock. You can see the current frequency of each CPU core on the top of the panel.
68 Software Description
CPU Fan
CPU Fan control panel provides Smart mode and
Manual Mode . You can switch the control mode by clicking the Smart Mode and Manual Mode buttons on the top of the CPU Fan control panel.
y Manual Mode - allows you to manually control the
CPU fan speed by percentage.
y Smart Mode - a linear fan speed control feature.
The control panel contains 4 dots allows you to drag and adjust the Smart Speed slopes. The fan speed will be changed along these lines with CPU temperature. The white dot will create strip chart in real time.
y System Fan Button panel in new window.
- to open the system fan control y Fan Tune Button smart fan setting.
- to automatically optimize the
Manual Mode
Smart Mode
CPU Voltage
CPU Voltage control panel allows you to control the
CPU voltage.
DRAM Frequency & DRAM Voltage
y DRAM Frequency and frequency.
- Shows the DRAM clock, ratio y DRAM Voltage - Allows you to adjust the DRAM voltage. The risky values are displayed in red.
IGP Frequency & GT Voltage
y IGP Frequency - Allows you to adjust the IGP ratio, and shows the IGP clock, ratio and frequency.
y GT Voltage - Allows you to adjust the GT voltage.
The risky values are displayed in red.
Software Description 69
OC GENIE 4
OC GENIE 4 provides a specified CPU frequency for overclocking the CPU.
Option Buttons - Advanced
When click the Advanced button, The Voltage , Fan and DRAM icons will appear. y
Voltage - allows you to adjust advanced voltage values of CPU and chipset.
y Fan - allows you to control the system fans speed.
y DRAM - shows the current Advanced DRAM parameters, and allows you to change the settings by selecting values from the drop-down menu on the right hand side.
y Sensor - allows you to monitor your motherboard temperature and fan speed with the virtual thermal image. You can drag and drop the fan icons to new locations. When you press the Cooling button, all fans will run at full speed.
Option Buttons - Setting
When click the Setting button, The Record , Warning and Mobile Control icons will appear. y Record - allows you to monitor the status of voltage, fan speed and temperature in real time.
To filter record charts, select the check box next to the items.
When click the Play button, the chart pane will start to show the recording chart.
If you want to check the value of a specific spot on chart, please move the orange vertical line to the spot.
History Record stores the data and names with date and time.
To make a history record: Select items and click the Record button. When finished, click the Record button again. The data will be stored in the drop-down menu.
To load a record, click the drop-down menu and select one from the list.
To delete a record, select the record that you want to delete, and click the
Can icon.
Trash
70 Software Description
y Warning - contains fields of voltage, fan speed and temperature for you to set the threshold values. When system detects the status over your settings, a warning message will pop-up.
y
Mobile Control - is only available for the motherboard with the built-in WiFi module.
It allows you to enable/disable the COMMAND CENTER Remote Server. Please refer to the instruction on the Mobile Control control panel.
y To start remote control: (optional)
1. Download and install MSI ® COMMAND CENTER APP to your mobile device.
2. Enable COMMAND CENTER Remote Server on the Mobile Control panel.
3. Enable SoftAP Management .
4. Enter SSID and Password , and then click the Apply button.
5. Activate Wi-Fi ® on your mobile device and connect to SoftAP with the SSID.
6. Run MSI ® COMMAND CENTER APP on your mobile device.
7. Find the IP address on the SoftAP Management Setting area, and enter the IP address on your MSI ® COMMAND CENTER APP to link your system.
8. Press Refresh on the MSI ® COMMAND CENTER APP to verify that monitoring and
OC functions are working properly.
Option Buttons - Information
When click the Information button, The Motherboard , CPU , Memory and HW monitor icons will appear.
You can click the icons to open the related information.
Gadget Mode
COMMAND CENTER provides a gadget mode to monitor the system status. You can switch between gadget mode and full mode by clicking the arrow icon on the top left.
y To arrange gadgets:
1. Click the Spanner icon on the Gadget mode, a configuration panel will slide out.
2. Select the check box next to the items.
3. Click the Close button.
Software Description 71
X-BOOST
The MSI X-BOOST allows you to select the system performance mode to meet your current system environment or support faster storage access speed for your external storage or memory cards.
Easy
In Easy page, you can select one system performance mode to meet the current system environment.
Setting
Performance mode
Performance information y Performance mode - moves over the mouse to any one of performance mode and click on the ON button to enable it.
Important
The Customize mode is the default of system performance.
y Performance information mode.
- displays the system performance diagram of enabled y Setting - enables or disables Run X-BOOST when windows starts .
72 Software Description
Advance
In Advance page, you can enable the USB SPEED UP, the STORAGE BOOST and VR
BOOST .
Setting
Device information y Device information - displays the information and current transfer rates/ access speeds of USB/ storage devices.
y Setting - enables or disables Run X-BOOST when windows starts .
y
USB SPEED UP - supports faster data transfer rates of the USB storage devices. y STORAGE BOOST - supports faster access speed of storage device.
y VR BOOST experience.
- provides the optimized settings to boost the system for better VR y OPTANE BOOST reboot).
- supports faster access speed of Intel Optane memory (require a
Important y Please note that you can only select one mode at a time from Easy or Advance page as MSI X-BOOST function.
y The improved transfer rate/ access speed will vary with the USB/ storage device.
Software Description 73
MYSTICLIGHT
MYSTICLIGHT is an application allows you to control LED lights of MSI products.
Main Screen
The Main screen is used to configure what devices need to be synchronized and LED light effect options.
Sync Devices
ON/ OFF All LED
Sync Profile
Device Setting
Light Effect
Options
Apply Button
Save Button
Live Preview y
ON/OFF All LED - allows you to turn ON/ OFF all LED lights of sync devices.
y
Sync Devices - allows you to select devices to sync by clicking the device's icon on the Sync Device bar. The lighting effect of the sync devices will be controlled by the main screen.
y
Live Preview - gives you the full experience of your configuration ’ you are editing it.
y
Light Effect Options - allow you to customize lighting effect of the sync devices.
y
Apply Button - applies lighting effect settings.
y Sync Profile - manages sets of sync device lighting effect settings.
All Sync - all devices are synchronized to the main lighting effect settings.
Individual - all devices lighting effects are applied to their respective settings.
Profile01~03 - selected sync devices lighting effects are synchronized to the main lighting effect settings.
y
Save Button
Sync Profile.
- saves sync device settings and lighting effect settings to the current y
Device Setting - switches to the other supported products.
74 Software Description
Motherboard Screen
The motherboard screen is used to configure the LED light effect of the motherboard.
Sync All
Return Button
ON/ OFF All LED
Profile
LED Area
Motherboard
Name
Live Preview
Apply Button
Save Button
Light Effect
Options
Note: The motherboard picture and name may vary according to different models.
y
Return Button - returns to the main screen.
y ON/OFF All LED - allows you to turn ON/ OFF all LED lights of the motherboard.
y Sync All - allows you to synchronize all LED light effect of the motherboard.
y Motherboard Name - shows the name of the motherboard.
y
Live Preview - gives you the full experience of your configuration ’ you are editing it.
y
Light Effect Options - allow you to customize lighting effect of the sync devices.
y Apply Button - applies lighting effect settings.
y Profile - manages sets of motherboard LED light effect settings.
y Save Button profile.
- saves sync device settings and lighting effect settings to the current y LED Area - switches to the other LED area on the motherboard.
Software Description 75
MSI SMART TOOL
MSI SMART TOOL is a convenient tool that can help you to create your Windows installation USB flash drive with USB 3.0 drivers, and it can also create a software
RAID.
Main menu
After installing and activating MSI SMART TOOL, it will display a main menu for you to choose Win7 Smart Tool or Software RAID . Note that the Software RAID is only available when your system equipped with at least 3 hard-disk drives (1 system disk and 2 data disks).
WIN7 SMART TOOL
Before you can create your Windows installation USB flash drive, you ’ your Windows Installation DVD or ISO file, and also have a minimum of a 8GB USB flash drive to create your installer. Be sure to backup files on the USB drive, this process will erase it.
To create the Windows installation USB drive:
Step1. Choose source folder
y
In the Source folder box, type the name and path of your Windows ISO file, or click Browse button and select the file from the dialog box. (This option will copy all
Windows installation files and USB 3.0 drivers) y
If you already have the Windows Installation USB flash drive and just want to add
USB 3.0 drivers on it, you can choose Add USB drivers.
Step2. Choose Storage device
y Choose USB storage and select your USB flash drive in the drop-down list. In case the USB flash drive is not listed, click the Refresh Drive button.
y If you want to install Windows on the PCIe M.2 RAID that was created by BIOS > M.2
Genie (please refer to BIOS Setup Section for details), check the M.2 Genie checkbox to copy iRST drivers to the USB flash drive.
y Click Start .
Important
You can also create an installer ISO image file by selecting the ISO destination in
Step2, and then burn it onto the DVD. However, this method does not support M.2
Genie .
76 Software Description
SOFTWARE RAID
This utility allows you to create a software RAID in Windows system.
To create a software RAID:
1. Use checkboxs to select the disks you want included in your RAID.
2. Choose Speed Up or Backup for RAID type.
y Speed Up = RAID0 y
Backup = RAID1
3. Click Start .
4. When prompt Finish!, click OK .
Important
Software RAID can't includ the system disk.
Software Description 77
RAMDISK
RAMDISK creates a virtual RAM drive using the available memory in your computer, the performance of the RAMDISK is faster than an SSD and hard drive. RAMDISK allows you to store any temporary information on it. Furthermore, using the RAMDISK will extend your SSD s life by sparing it from excessive reading and writing.
Creating a RAM Disk
When RAMDISK is started, it will create a default RAM disk. If you want to change settings, refer to following instructions.
Setting
Backup
Option
Apply
Button
Management y Setting - specify Letter , Name , Size and Format of the RAM disk.
y Option - select browser temporary files to save/load on the RAM disk. You can also add software files to improve reading speed.
y Backup - specify backup and restore settings to prevent data loss. All files will be lost each time the RAMDISK is stopped if you do not backup.
Browse Button - set the path to the image file.
Backup Right Now Button - manually backup files.
Restore On Boot
RAMDISK starts.
- check this box to have the image file loaded automatically when
Auto Backup - check this box to backup automatically over a period of time. y Apply Button - allows you to apply changes.
y Management - shows RAMDISK information and allows you to delete files.
Remove the RAM disk
Dislpay information
Delete files in the RAM disk.
78 Software Description
NETWORK MANAGER
NETWORK MANAGER is an utility for traffic shaping for the Windows 10. It can keep your internet fast during heavy upload/ download and improve your ping for online games. If your motherboard has a Wi-Fi module, NETWORK MANAGER provides virtual access point function for traffic shaping for your mobile devices.
y Applications - displays currently using network bandwidth applications. You can prioritize Games, Medias or File sharing programs as high as possible.
y Performance - shows top 5 applications by total traffic, allows you to monitor network bandwidth usage.
y Network Test - allows you to setup bandwidth control.
y Advanced Setting - allows you to expand RWIN to accelerate download speed. You can also block IP address and setup virtual access point.
y Information - shows version information.
Configuring Bandwidth
This section describes how to configure Internet Provider Speed. You can configure default internet upload and download bandwidth from the Network Test tab on the
NETWORK MANAGER window.
Important
Before using the NETWORK MANAGER for the first time, you should use the Test
Network Speed button which runs a speed test of your current total Internet bandwidth delivered through your Internet service provider.
Software Description 79
Speed Testing
The speed testing is used to optimize bandwidth usage. To test the Upload and Download speed, please follow the steps below:
1
1. Click the Network Test block in NETWORK MANAGER.
3
4
2
2. Click Test Network Speed button. The test takes several minutes to test your network speed.
3. Enter the testing results into Upload Speed and Download Speed fields.
4. Check the Enable Bandwidth Control to allow the NETWORK MANAGER to manage the bandwidth.
80 Software Description
Intel
®
Extreme Tuning Utility
Intel ® Extreme Tuning Utility (Intel XTU) is a simple overclocking software for you to tune, test and monitor your system.
Tuning Controls
Views
Settings
Help
Navigation
System
Graphs y
Views Settings Help
System
Table
System
Monitors
Views - toggles to switche between Monitoring and Show All view.
Settings - opens the General Settings window.
Help - displays the help content for Intel XTU in a separate window.
y
Navigation - lists all of the major functions of Intel XTU.
System Information - shows the details about your system.
App-Profile Pairing - tunes automatically based on active application.
Manual Tuning - changes system settings in a free form.
Stress Test - tests the stability of your system.
Benchmarking - analyzes and compares your system ’ other system profiles.
Profiles - manages sets of system settings.
y Tuning Controls - displays the controls for changing the system settings in manual tuning. For stress tests and profiles, this area displays the settings for these features.
y System Table - displays information about the current system settings and a summary of your changes.
y System Graphs - shows measured system values over a period of time. The system graphs update live as changes are detected in the system. You can customize the system graphs to show the data you need for your overclocking strategy in the system graphs preferences.
y
System Monitors - shows the range of the value, averages, and the current value.
The monitors change color if the monitored values fall into warning or critical zones.
Software Description 81
CPU-Z
CPU-Z is an utility that gathers information on some of the main devices of your system.
y CPU Tab - shows processor name, code name, package, specification, instructions sets, core speed and cache levels.
y Caches Tab - shows extended information related to the cache capabilities.
y Mainboard Tab - shows motherboard manufacturer, model name, chipset, BIOS version and graphic interface.
y Memory Tab - shows memory type, memory size, channels, memory frequency.
y SPD Tab - shows specifications relating to each memory module connected to the motherboard, including the size, type and frequency.
y Graphics Tab type.
- shows GPU name, code name, core speed, memory size, and memory y Bench Tab - allows you to run either a benchmark or a stress test on your processor.
y
About Tab - shows the CPU-Z version, Windows version, DirectX version and allows you to save the report file.
82 Software Description
RAID Configuration
Below are the different types of a RAID.
RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and provides enhanced read performance.
RAID 5 provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.
RAID level comparison
RAID 0
Minimum # drives 2
Data protection None
Read performance Excellent
Write performance Excellent
Capacity utilization 100%
RAID 1
2
Excellent
OK
Good
50%
RAID 5 RAID 10
3
Excellent
Good
4
Excellent
OK
OK Good
67%~(1-1/n) 50%
Using Intel
®
Rapid Storage Technology Option ROM
First, you need to set the SATA mode to RAID in BIOS to create, delete and reset RAID volumes. To enter the IRST Option ROM, reboot and press Ctrl + I keys to enter the
IRST Option ROM during the POST, the following window will appear.
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit
[ ]
RAID Volumes :
None defined.
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
Important
The following procedure is only available with a newly-built system or if you are reinstalling your OS. It should not be used to migrate an existing system to RAID.
RAID Configuration
83
Creating s RAID Volume
1. Select option Create RAID Volume and press Enter key. The following screen appears.
Name :
RAID Level :
Disks :
Strip Size :
Capacity :
Sync :
Volume0
RAID1(Mirror)
Select Disks
N / A
XXX.X GB
N / A
Create Volume
RAID 1 : Mirrors data (redundancy) .
[ ↑↓] - Change [TAB] - Next [ESC] - Previous Menu [ENTER] - Select
2. Specify a RAID Volume name and then press the Tab or Enter key to go to the next field
3. Use the ↑↓←→ arrow keys to select the RAID level best suited to your usage model in RAID Level.
4. In the Disk field, press Enter key and use Space key to select the disks you want to create for the RAID volume, then click Enter key to finish selection. This field will become available according to the selected RAID level.
5. Select the strip size for the RAID array by using the ↑ upper arrow or ↓ down arrow keys to scroll through the available values, and pressing the Enter key to select and advance to the next field. The available values range from 4KB to
128 KB in power of 2 increments. The strip size should be chosen based on the planned drive usage. Here are some typical values:
RAID0 -128KB / RAID10 - 64KB / RAID5 - 64KB.
6. Select the capacity of the volume in the Capacity field. The default value is the maximum volume capacity of the selected disks.
Important
Since you want to create two volumes, this default size (maximum) needs to be reduced. Type in a new size for the first volume. As an example: if you want the first volume to span the first half of the two disks, re-type the size to be half of what is shown by default. The second volume, when created, will automatically span the remainder of two hard drives.
7. Go to the Create Volume field and press Enter , a WARNING message will appear for you to confirm if you are sure to create the RAID volume. Press Y to continue.
84
RAID Configuration
Removing a RAID Volume
Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost.
Important
If your system currently boots to RAID and you delete the RAID volume in the IRST
Option ROM, your system will become unbootable.
Select option Delete RAID Volume from the main menu screen and press Enter key to select a RAID volume for deletion. Then press Delete key to delete the selected RAID volume. The following screen appears.
Name Level Drives Capacity Status Bootable
Volume0 RAID1(Mirror) 2 XXX.XGB Normal Yes
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete “Volume0”? (Y / N) :
Deleting a volume will reset the disks to non-RAID.
WARNING : ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[ ↑↓] - Select [ESC] - Previous Menu [DEL] - Delete Volume
Press Y key to accept the volume deletion.
Resetting Disks to Non-RAID
Select option Reset Disks to Non-RAID from the main menu screen and press Enter to delete the RAID volume and remove any RAID structures from the drives. Use the
Space key to select the disks and press Enter key. A confirmation sentence will appear below, and then press Y key to accept the selection
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume
Resetting RAID disk will remove its RAID structures and revert it to a non-RAID disk.
5. Exit
[ ]
RAID Volumes :
None defined.
WARNING : Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Size Status
XXXXXXXXXXXXXX XXX.XGB Member Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB Member Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
Select the disks that should be reset.
[ ↑↓] - Previous/ Next [SPACE] - Selects [ENTER] - Selection Complete
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
RAID Configuration
85
Important y
You will lose all data on the RAID drives and any internal RAID structures when you perform this operation.
y
Possible reasons to Reset Disks to Non-RAID could include issues such as incompatible RAID configurations or a failed volume or failed disk.
Recovery Volume Options
Select option Recovery Volume Options from the main menu screen and press Enter to change recovery volume mode. The following screen appears:
1. Enable Only Recovery Disk
2. Enable Only Master Disk
Enable Only Recovery Disk - enables recovery disk if available and disables master disk.
Enable Only Master Disk - enables master disk if available and disables recovery disk.
Actions will result in change from Continuous Update mode to On-Request.
[ ↑↓] - select [ESC] - Previous Menu [ENTER] - Select
Recovery mode will change from Continuous Update to On-Request after you enable
Only Recovery Disk or Only Master Disk .
Degraded RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation.
RAID Volumes
ID Name Level Strip Size Status Bootable
0 Volume0 RAID 1(Mirror) N/A XXX.XGB Degraded Yes
Physical Disks:
Port Device Model
1 XXXXXXXXXXXXX
2 XXXXXXXXXXXXX
Serial #
XXXXXXXXXXXXX
XXXXXXXXXXXXX
Size
XXX.XGB
XXX.XGB
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)
Press <CTRL-I> to enter Configuration Utility..
Missing Hard Drive Member
1. Power off.
86
RAID Configuration
2. Reconnect the hard drive.
3. Reboot to Windows ® ; the rebuild will occur automatically.
Failed Hard Drive Member
1. Power off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system to IRST Option ROM by press Ctrl + I keys during the POST.
4. Select the port of the destination disk for rebuilding, and then press Enter .
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes :
None defined.
Select the port of the destination disk for rebuilding (ESC to exit):
Port Drive Model Serial # Size
XXXXXXXXXXXXXX XXX.XGB
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
5. Exit IRST Option ROM, reboot to Windows ® .
6. When prompted to rebuild the RAID volume, click Yes .
7. The Intel ® Rapid Storage Technology application will be launched. Right-click the new hard drive and select Rebuild to this Disk . The Rebuild Wizard will be launched which will guide you through the process of rebuilding to the new hard drive.
RAID Configuration
87
M.2 PCIe SSD RAID
You can create a M.2 PCIe SSD RAID volume with M.2/Optane Genie or UEFI BIOS.
Important y Please note that you must install M.2 SSDs of the slots to create the RAID 0 volume.
same model and type in the M.2 y During windows setup, the RAID driver may be required and you can find the RAID driver in MSI Driver Disc. y You can use MSI SMART TOOL to build the Windows ® includes RAID driver.
7/ 8.1/ 10 installation drive that y If your system currently boots to M.2 PCIe SSD RAID and you delete the RAID volume, your system will become unbootable.
y When you delete the M.2 PCIe SSD RAID volume, please be noted that all data on M.2
PCIe SSDs will be lost.
Creating a M.2 PCIe SSD RAID with M.2/Optane Genie
1. Access the BIOS setup.
2. Enable M.2/Optane Genie by clicking the M.2/Optane Genie item.
3. Click Ok in the dialog.
4. Press F10 to save configuration and exit.
Creating a M.2 PCIe SSD RAID with UEFI BIOS
1. Access the BIOS setup
2. Switch to Advanced Mode by pressing F7 key.
3. Go to Settings > Advanced > Windows OS Configuration.
4. Set Windows 8.1/10 WHQL Support to Enabled .
5. Go to Settings > Advanced > Integrated Peripherals.
Setting\Advanced\Integrated Peripherals
SATA Configuration
SATA Mode
M2_1 Pcie Storage Remapping
M2_2 Pcie Storage Remapping
[RAID Mode]
[Enabled]
[Enabled]
6. Set SATA Mode to RAID Mode .
7. Set both M2_1 Pcie Storage Remapping and M2_2 Pcie Storage Remapping to
Enabled.
8. Press F10 to save and exit and then press the Enter key to select Yes .
9. Reboot the system and access the BIOS setup again.
10. Switch to Advanced Mode by pressing F7 key.
11. Go to Settings > Advanced > Intel(R) Rapid Storage Technology.
88
RAID Configuration
12. Select Create RAID Volume and press Enter key.
...\Intel(R) Rapid Storage Technology\
Create RAID Volume
Create RAID Volume
Name:
RAID Level:
Select Disks:
PCIe, XXXXX XXXXXXXX-XXXX, XXXGB
PCIe, XXXXX XXXXXXXX-XXXX, XXXGB
Strip Size:
Capacity (MB):
Create Volume
Volume1
[RAID0(Stripe)]
[X]
[X]
[XXKB]
XXXXXX
13. Enter in a volume name.
14. Select the RAID level.
15. Use Space key to select the both PCIe SSDs.
16. If creating RAID 0, select the Strip Size; it is recommended that it be left at the default value.
17. Go to the Create Volume field and press Enter .
RAID Configuration
89
Removing a M.2 PCIe SSD RAID Volume with M.2/Optane Genie
1. Access the BIOS setup.
2. Disable M.2/Optane Genie by clicking M.2/Optane Genie item.
3. Click Ok in the dialog.
4. Press F10 to save configuration and exit.
Removing a M.2 PCIe SSD RAID Volume with UEFI BIOS
1. Access the BIOS setup.
2. Switch to Advanced Mode by pressing F7 key.
3. Go to Settings > Advanced > Intel(R) Rapid Storage Technology.
4. Select a RAID volume and press Enter key.
5. Go to the Delete field and press Enter . The following screen appears
...\RAID VOLUME INFO\
Delete
Delete
Delete the RAID volume?
ALL DATA ON VOLUME WILL BE LOST!
Yes
No
6. Go to the Yes field and press Enter key to accept the volume deletion.
90
RAID Configuration
Intel
®
Optane™ Memory Configuration
Intel ® Optane™ memory can accelerate the Windows 10 64bit operating system. This section describes how to install and remove the Intel ® Optane™ memory.
System Requirements
y Intel ® Optane™ memory ready MSI ® motherboards y Supported 7th Gen, or later, Intel ® Core™ - i Processor y
System BIOS that supports the Intel ® later driver
Rapid Storage Technology (Intel ® RST) 15.5 or y
Operating system: Windows 10 64 bit (UEFI mode).
y
Intel ® Optane™ Memory Module
Installing the Intel
®
Optane™ memory
The Intel ® Optane™ memory is pre-installed on this motherboard, just skip to step 4:
Install the Intel ® Rapid Storage Technology 15.5.
1. Update BIOS (refer to the Updating BIOS section).
2. Install the Intel ® Optane™ memory module.
Power off the system.
Refer to the Specifications for location to install your Intel ® Optane™ memory module.
Install the Intel ® Optane™ memory module into the M.2 slot.
3. Enable M.2/Optane Genie
Power on and press Delete key to enter BIOS Setup menu.
Enable M.2/Optane Genie by clicking the M.2/Optane Genie item.
Click Ok in the dialog.
Press F10 to save configuration and exit.
4. Install the Intel ® Rapid Storage Technology 15.5
Reboot to operating system.
Install the Intel ® Rapid Storage Technology 15.5
Reboot System.
Intel® Optane™ Memory Configuration
91
5. Enable Intel ® Optane™ Memory.
Enable Intel ® Optane™ Memory via the Intel ® Optane™ memory application
(auto-launches upon reboot).
Click Yes in the dialog.
Reboot System.
WARNING
Once you enable Intel ® Optane™ memory, in order to prevent seriously damage your operating system, please follow the cautions listed below.
y
DO NOT set the SATA mode back to AHCI in BIOS.
y DO NOT revert back to older version of the BIOS.
y DO NOT remove the Intel ® Optane™ memory module. y
DO NOT replace the CPU that is not supported by Intel ® Optane™ Memory.
92
Intel® Optane™ Memory Configuration
Removing the Intel
®
Optane™ memory
If you no longer want to use Intel ® Optane™ memory, you have to disable the Intel ®
Optane™ memory before removing the Intel ® Optane™ memory module to avoid operating system damage. Please follow the steps below to remove the Intel ® Optane™ memory.
1. Disable Intel ® Optane™ Memory.
Disable Intel ® Optane™ Memory via the Intel ® Optane™ memory application
(Intel ® Rapid Storage Technology).
Click Yes in the dialog.
Reboot System.
2. Disable M.2/Optane Genie
Press Delete key to enter BIOS Setup menu during POST.
Disable M.2/Optane Genie by clicking M.2/Optane Genie item.
Click Ok in the dialog.
Press F10 to save configuration and exit.
3. Remove the Intel ® Optane™ memory module.
Power off the system.
Remove the Intel ® Optane™ memory module.
Intel® Optane™ Memory Configuration
93
Troubleshooting
When you installed the operating system in AHCI mode, the system will be changed to
RAID/ Optane mode after enabling Intel ® Optane™ Memory. If you want to disable Intel
Optane Memory and switch BIOS setting from RAID/ Optane mode back to AHCI mode, that may cause operating system damage. MSI has developed a software assistance for this problem. You can disable Intel ® Optane™ Memory and switch back to AHCI mode while keep the system bootable with MSI SMART TOOL.
Please follow the steps below to disable Intel ® Optane™ Memory and set the SATA mode back to AHCI.
1. Run MSI SMART TOOL.
2. Click the OPTANE icon. (Note: the OPTANE icon is only available when Intel ®
Optane™ Memory has been enabled)
3. Click Yes .
4. Reboot System.
94
Intel® Optane™ Memory Configuration
Troubleshooting
Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below.
The power is not on.
y
Connect the AC power cord to an electrical outlet securely.
y
Check if all ATX power connectors like ATX_PWR1, CPU_PWR1 are connected from the power supply to the motherboard?
y Some power supply units have a power button on the rear side, make sure the button is turned on.
y
Check if the power switch cable is connected to JFP1 pin header properly.
y
Verify the Clear CMOS set to Keep DATA .
jumper JBAT1 is y
Test with another known working power supply of equal or greater wattage.
The power is on, but no signal to monitor
y Connect the monitor power cord to a electrical outlet securely.
y Make sure the monitor is turned on.
y
Select different inputs on the monitor.
y
If 3 long beeps are heard, remove all memory modules and try to install only one memory module in the DIMMA2 slot first and then restart the computer.
y If 1 long 2 short beeps are heard, remove and reinstall the graphics card and then restart the computer.
y Test with another known working graphics card.
The computer does not boot after updating the BIOS
y
Clear the CMOS.
y Use the secondary BIOS to bootup the system (Only for motherboard with Dual
BIOS)
Lost BIOS password
y
Clear the CMOS, but that will cause you to lose all customized settings in the
BIOS.
There is no audio
y Adjust the volume.
y Connect the speakers/headphones to audio ports on the motherboard rear IO panel.
y Remove secondary speakers/ headphones, HDMI cables, USB audio devices.
y Test with another known working speaker or headphone.
There is no network
y
Make sure the network chipset driver has been installed.
y
Verify if the network cable is properly connected and make sure the LAN port
LEDs are properly illuminated. y Verify your TCP/IP settings.
y
Restart or reset your router.
y Test with another known working LAN cable.
The USB device is not working
y
Make sure your USB drive driver has been installed.
y
Verify if USB device is listed in
Windows ® Device Manager.
y
Connect the USB device to other USB port on the motherboard rear IO panel.
Troubleshooting
95
96
Regulatory Notices
FCC Compliance Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and receiver.
y Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
Tested to comply with FCC standards
FOR HOME OR OFFICE USE
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity
Products bearing the CE marking comply with one or more of the following EU
Directives as may be applicable:
RED 2014/53/EU; Low Voltage Directive 2014/35/EU;
EMC Directive 2014/30/EU; RoHS Directive 2011/65/EU.
Compliance with these directives is assessed using applicable European Harmonized Standards.
The point of contact for regulatory matters is MSI,
MSI-NL Eindhoven 5706 5692 ER Son.
B 급 기기 ( 가정용 방송통신기자재 )
이 기기는 가정용 (B 급 ) 전자파적합기기로서 주
로 가정에서 사용하는 것을 목적으로 하며 , 모
든 지역에서 사용할 수 있습니다 .
クラス B 情報技術装置
この装置は、クラスＢ情報技術装置です。この
装置は、家庭環境で使用することを目的として
いますが、この装置がラジオやテレビジョン受
信機に近接して使用されると、受信障害を引き起こすこと
があります。取扱説明書に従って
正しい取り扱いをして下さい
VCCI-B
C-Tick Compliance
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Taiwan:
廢電池請回收
For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in
California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC
No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at: http://www.msi.com/html/popup/csr/evmtprtt_pcm.
html
Environmental Policy
y The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
y Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
y Visit the MSI website and locate a nearby distributor for further recycling information.
y Users may also reach us at [email protected] for information regarding proper Disposal, Take-back,
Recycling, and Disassembly of MSI products.
WEEE (Waste Electrical and
Electronic Equipment) Statement
ENGLISH
To protect the global environment and as an environmentalist, MSI must remind you that...
Under the European Union (“EU”) Directive on Waste Electrical and Electronic
Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot
be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.
DEUTSCH
Hinweis von MSI zur Erhaltung und Schutz unserer
Umwelt
Gemäß der Richtlinie 2002/96/EG über Elektro- und
Elektronik-Altgeräte dürfen Elektro- und Elektronik-
Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt, die in die
Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen.
Bitte entsorgen Sie dieses Produkt zum gegebenen
Zeitpunkt ausschliesslich an einer lokalen
Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS
En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...
Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent
être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....
В соответствии с директивой Европейского
Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива
WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы.
MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории
EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.
ESPAÑOL
MSI como empresa comprometida con la protección del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS
Om het milieu te beschermen, wil MSI u eraan herinneren dat….
De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…
Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/
EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...
Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych
(Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia.
MSI wypełni wymagania UE, przyjmując produkty
(sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.
TÜRKÇE
Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:
Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik
Malzeme Atığı, 2002/96/EC Kararnamesi altında 13
Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların
üreticileri, cihazların kullanım süreleri bittikten sonra
ürünleri geri toplamakla yükümlü olacaktır. Avrupa
Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.
ČESKY
Záleží nám na ochraně životního prostředí - společnost
MSI upozorňuje...
Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/
97
98
EC platné od 13. srpna 2005 je zakázáno likvidovat
“elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích
EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.
MAGYAR
Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti
Önt, hogy ...
Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként,
és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.
ITALIANO
Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….
In base alla Direttiva dell’Unione Europea (EU) sullo
Smaltimento dei Materiali Elettrici ed Elettronici,
Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali
Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
日本 JIS C 0950 材質宣言
日本工業規格 JIS C 0950 により、 2006 年 7 月 1 日以降に販
売される特定分野の電気および電子機器について、製造
者による含有物質の表示が義務付けられます。 http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the “India E-waste
(Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and
0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Türkiye EEE yönetmeliği
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Україна обмеження на наявність небезпечних речовин
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнані, затвердженого постановою
Кабінету Міністрів України від 3 грудня 2008 № 1057.
Vi ệ t Nam RoHS
K ể t ừ ngày 01/12/2012, t ấ t c ả các s ả n ph ẩ m do công ty MSI s ả n xu ấ t tuân th ủ Thông t ư s ố 30/2011/TT-BCT quy đ ị nh t ạ m th ờ i v ề gi ớ i h ạ n hàm l ượ ng cho phép c ủ a m ộ t s ố hóa ch ấ t đ ộ c h ạ i có trong các s ả n ph ẩ m đi ệ n, đi ệ n t ử ”
产品中有害物质的名称及含量
部件名称
印刷电路板组件 *
电池 **
铅
(Pb)
╳
汞
(Hg)
○
镉
(Cd)
○
有害物质
六价铬
(Cr(VI))
○
多溴联苯
(PBB)
○
多溴二苯醚
(PBDE)
○
╳ ○ ○ ○ ○ ○
外部信号连接头
线材
╳
╳
○
○
○
○
○
○
○
○
○
○
本表格依据 SJ/T 11364 的规定编制。
○ : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
╳ : 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合
欧盟 RoHS 要求。
* 印刷电路板组件 : 包括印刷电路板及其构成的零部件。
** 电池本体上如有环保使用期限标识，以本体标识为主。
■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。
■ 產品部件本体上如有环保使用期限标识，以本体标识为主。
限用物質含有情況標示聲明書
單元
電路板
電子元件
金屬機構件
塑膠機構件
鉛
(Pb)
○
－
－
○
汞
○
○
○
○
(Hg)
限用物質及其化學符號
鎘
(Cd)
○
○
○
○
六價鉻
(Cr +6
○
○
○
○
)
多溴聯苯
(PBB)
○
○
○
○
備考 1. 0.1 wt % ” 及 “超出 0.01 wt % ” 係指限用物質之百分比含量超出百分比含量基準值。
備考 2. 係指該項限用物質之百分比含量未超出百分比含量基準值。
備考 3. 係指該項限用物質為排除項目。
多溴二苯醚
(PBDE)
○
○
○
○
Copyright
Micro-Star Int ’
Copyright © 2017 All rights reserved.
The material in this document is the intellectual property of Micro-Star Int ’ in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
Technical Support
If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor.
Alternatively, please try the following help resources for further guidance.
y Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http:// www.msi.com
y Register your product at: http:// register.msi.com
Trademark Recognition
All product names used in this manual are the properties of their respective owners and are acknowledged.
Revision History
Version 1.0, 2017/08, First release.
99
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Supports 8th Gen Intel® CoreTM / Pentium® Celeron® processors for LGA 1151 socket
- Supports DDR4 Memory, up to 4000+(OC) MHz
- DDR4 Boost: Advanced technology provided by MSI OC lab to ensure maximum compatibility for overclocking performance
- AUDIO BOOST: Reward your ears with studio grade sound quality for the most immersive audio experience
- Mystic Light and Mystic Light Sync: Personalize your PC with 7 colors / 5 effects controlled in one click with the Mystic Light APP or a mobile device
- MULTI-GPU: With Steel Armor PCI-E slots. Supports AMD 2-Way Crossfire™
- EZ Debug LED: Easiest way to troubleshoot
- Twin Turbo M.2: Delivering Speeds Up to 32Gb/s, Intel Optane Memory Ready
- Lightning USB: Double bandwidth, supports USB 3.1 Gen2 Type A + Type C
- PCI-E Steel Armor: Protecting VGA cards against bending and EMI