Legrand TracJack High Density Patch Panel Kit for 30 modules, Instruction Sheet

 TITLE
Ey ORTRONICS 52 | FIBER/COPPER PATCH PANEL
FAX: 660-405—2890 INSTRUCTION SHEET
FIBER ROUTING:
1. MAINTAIN A MINIMUM BEND RADIUS
OF 10 TIMES THE OUTSIDE DIAMETER
OF THE FIBER JACKET.
(SEE FIGURE 1).
ILL Li LL. kn ı E ii LL.
FIGURE 1
NOTE: KEEP FIBER AND COPPER CABLES
SEPARATED (SEE FIGURE 1).
COPPER WIKE ROUTING:
1. PULL CABLE THROUGH BEZEL
WHERE THE MODULE WILL BE LOCATED.
PLACE MODULE WITH FRONT FACE
AGAINST THE NEAREST SUITABLE
TERMINATION LOCATION (FIGURE 2).
TERMINATE PER WIRING AND CABLING
INSTRUCTIONS, THEN FLIP MODULE OVER
AND SNAP INTO PLACE IN BEZEL.
REPEAT FOR ALL MODULES.
FIGURE 2
2. MAINTAIN A MINIMUM BEND RADIUS
OF 4 TIMES THE OUTSIDE DIAMETER
OF THE CABLE.
CAD: 1:\716\011001
INSTRUCTION SHEET # | REV. | ECN $ SHEET DWN.BY:
DATE
71601100 1 of 1 | WATROUS | 08/25/00
CHK.BY: DATE APP._BY: DATE
">