advertisement
◉
Touch to zoom
INSTRUCTION MANUAL HEADSET MICROPHONE YP-M301 Thank you for purchasing TOA’s Headset Microphone. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. 1. GENERAL DESCRIPTION 4. SPECIFICATIONS The YP-M301 is a headset microphone designed to be exclusively used with an optional WM-1100 Portable Transmitter. Maximum Input Sound Pressure Terminal Cord Length Finish 2. NOMENCLATURE Headband Weight Slide arm Microphone boom Angle adjustable (360º) Maximum 60 mm Head pad 3.5 mm-diameter monaural plug Type Directivity Sensitivity Electret condenser type Unidirectional –46 dB (0 dB=1 V/Pa, 1 kHz, load: 2 kΩ) 117 dB SPL ø3.5 mm monaural plug 1.2 m Headband: ABS resin, black 45 g (cable included) Note: The design and specifications are subject to change without notice for improvement. • Accessories Storage case .............................................. 1 Windscreen (black) ..................................... 2 Microphone Windscreen 3. HOW TO USE • Put on the headset and adjust the slide arms so that the head pads are positioned just over the ears. • Adjust a microphone boom, and position the microphone (windscreen attached) at the mouth. • Keep the microphone 3 – 5 cm away from the mouth when using. • Speaking loud or positioning the microphone too close to the mouth could muffle sounds and make them inaudible. • The headset is not recommended for use in aerobics or other vigorous performance applications. • Use the supplied case when storing the unit. URL: http://www.toa.jp/ 133-05-309-0A
advertisement