6.5" (165 mm) 7" (178 mm)

Cut-Out Template for the Extron

Cable Cubby 650 UT

5" (127 mm) 4 1 / 4 " (108 mm)

SURFACE CUT-OUT AREA

1 / 16 ” (1.5 mm) Page size: 11" x 17" Print scale 1:1 Do not shrink.

1. Confirm the product to be installed.

2. Remove the surface cut-out area (gray) from the template.

3. Measure the cutout and template. 4. Mark the position on the furniture where the Cable Cubby 650 UT will be installed.

5. Double check dimensions and position, then cut the opening.

Keystone Mounting Holes (2) Mounting Holes (8) Cut outer edge when marking holes under furniture.

P/N 68-3085-01 Rev. A