Extech Instruments DV50 Telescoping AC Voltage Detector Datasheet

Telescoping AC Voltage Detector

Non-contact detection of AC Voltage up to 1000VAC

With telescoping probe giving a total reach of 39” (1m) for hard-to-reach areas

Features:

• Non-Contact Detection of AC Voltage from 6VAC to 1000VAC (50/60Hz)

• Telescoping probe extends to a reach distance of 39" (1m)

• Red LED Voltage indicator and On/Off controlled Audible beeper

• Sensitivity adjustment increases or reduces sensor trigger threshold

• Locate difficult to reach live wires and potentially dangerous manhole covers

• Dimensions: 7.7x2.4x1.2" (195x62x30mm)

Weight: 5.2oz (148g)

• Complete with two LR44 button batteries

Applications:

Detecting live AC Voltage on manholes with convenient telescoping probe.

When Voltage is detected, audible beeper will sound and the red LED will flash on the probe tip.

✓ ✗

Telescoping feature provides the convenience of easy reach by eliminating the hassles of bending down

✓ ✗

Probe extends to 0.9m with reach distance of 1m allows you to take measurements in hard to access areas without the use of a ladder.

Storage Position Sensor Tip Probe extends 36" (0.9m) allowing 39" (1m) total reach

Ordering Information:

DV50 ............Telescoping AC Voltage Detector

www.extech.com

61326 61326

Specifications subject to change without notice. 12/10/08 - R1

Copyright © 2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.