Vax PowerWash 2000w Complete Pressure Washer Owner manual

PowerWash
2000W Complete – P86-P2-T
Powerful
Pressure Washer
Perfect for tackling cars, large
scale paved surfaces and patios.
P86-P2-T
vax.co.uk
Let’s talk safety
PLEASE KEEP THESE ORIGINAL INSTRUCTIONS.
Basic safety precautions
This pressure washer is intended for household use only and
NOT for commercial or industrial use.
• This pressure washer is for outdoor use only.
• It is your responsibility to check the suitability of the surface
to be cleaned. Vax UK Ltd cannot be held responsible for
damage caused.
• Keep fingers, hair and loose clothing from moving parts and
openings whilst using the pressure washer.
• When using your pressure washer the recommended working
distance between the nozzle and surface area or object to be
cleaned is 30cm.
• For safe transportation, ensure that the pressure washer is
unplugged and secure.
• This appliance can only be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children should not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
• Vax only recommend the use of Vax genuine accessories and
detergent to be used with this pressure washer. The use
of non-branded Vax accessories and detergent will invalidate
your warranty.
Don’ts
8 Don’t leave the pressure washer unattended or running
when not in use for more than 5 minutes without depressing
the trigger.
8 Don’t use the pressure washer if it has been dropped,
damaged or immersed in water.
8 Don’t use the pressure washer if the power cord or plug is
damaged.
8 Don’t handle the plug of the pressure washer with wet hands.
8 Don’t use the pressure washer without the supply hose
(minimum length 7.5m) in place and unwind the hose fully
from reel.
8 Don’t use the pressure washer without the water filter in place.
8 Don’t pull or carry the pressure washer by the power cord.
Don’t use the power cord as a handle, pull the power cord
around corners or sharp edges or close a door over the
power cord. Don’t unplug the pressure washer by pulling on
the power cord.
8 Don’t aim the pressure washer at people, animals, plants,
electrical components, wires, or the pressure washer itself.
8 Don’t use the pressure washer on electrical components,
damaged/delicate paint surfaces, tyres, engines/motors.
8 Don’t use the pressure washer with incorrect voltage as this
may result in damage or injury to the user. The correct voltage
is listed on the rating label.
Do’s
3 Always wear suitable clothing, footwear and eye protection
whilst using the pressure washer.
3 Always connect the water supply, remove the lance and squeeze
the trigger to run water through the machine before switching
the power on.
3 Always use a suitable hose connector to match the coupling
on the pressure washer with a non-return valve at the tap end
of the supply hose.
3 Always unplug the pressure washer before cleaning or carrying
out any maintenance.
3 Always turn off and unplug the pressure washer before
disconnecting or connecting the hose. After use always wrap the
pressure hose and power cord around the storage clips provided.
3 Always release any built up pressure in the handle prior to
disconnecting the hose and ensure the water inlet filter is clean
prior to storage in a cool dry place.
3 Use only CE approved 13amp extension cords with RCD,
non-approved extension cords may overheat. Care should be
taken to arrange the extension cord as it could be a trip hazard.
3 Always make sure the power/extension cord is fully unwound and
prevent the power/extension cord from getting wet during use.
3 Always replace the fuse in the plug with a British 13amp fuse.
Always protect the power cable from heated surfaces or near
open flames.
3 Always carry the pressure washer by the handle.
3 Always check the water hose and accessories are not damaged,
broken or worn before use.
Thank you for buying this Pressure Washer.
Taking care of your outdoor cleaning
The pressure washer is designed to make outdoor cleaning tasks as effective and efficient
as possible and this user guide will help you get the most out of your machine.
Completing outdoor cleaning tasks using a Vax pressure washer will keep your outdoor
items and surfaces cleaner for longer.
Taking care of your Pressure Washer
Also inside this guide are instructions on maintaining your new machine, so that it’s always
ready when you are to tackle your outdoor cleaning tasks.
We’re here if you need us
Instead of taking me back to the shop,
simply visit our online support:
vax.co.uk/support
Still need to get in touch?
Our UK based Customer Care Team are here to support you.
For help with assembly, operational or performance problems, or buying and fitting new accessories,
you can find all our contact details at vax.co.uk/contact
This user guide can be found online at: vax.co.uk/support
Contents
Pressure Washer
Included with
your machine
Let’s talk safety
Getting to know your machine
Pressure hose
Getting started
Trigger handle
Using your machine
Lance
Taking care of your machine
Jet nozzle
(orange nib)
Let’s talk technical
Turbo nozzle
What to do if it goes wrong
Getting in touch
Detergent nozzle (white nib)
Nozzle cleaning tool
Accessories
Water inlet connector
Notes
Car brush
Rotary brush
Universal Detergent
Extension tube
Wash & Protect
Vehicle Detergent
Patio brush
Getting to know your machine
Handle
On/off switch
Trigger handle
storage
Power cord
and pressure
hose storage
hook
Water
inlet and
connector
(already
installed)
Wheel
Detergent
intake tube
Water outlet
Technical Specification
Name
Model
Voltage
Wattage
Max Pressure
Rated Pressure
Max Flow Rate
Accessories & Consumables
PowerWash 2000W Complete
P86-P2-T
220-240V~50Hz
2000W
140 bar
100 bar
430L/Hr
Sound pressure level:
LpA dB(A)
Sound power level:
LwA dB(A)
LwA dB(A) K (uncertainty)
Vibration (m/s2) K (uncertainty) 0,5 m/s2
Subject to technical change without notice.
Universal Detergent
1-9-133398-00
Patio & Decking Detergent
1-9-133401-00
Wash & Protect Vehicle Detergent
1-9-133400-00
81
96
93,2
1,5
To purchase consumables and accessories, please visit vax.co.uk
Getting started
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Always make sure the pressure washer and water supply is off before connecting or disconnecting the hose
and accessories.
Assembling your pressure washer
Attach both wheels
and push until they
click into place.
Attach the hose connector
to water inlet by turning
clockwise until tight.
Slot the handle in to the
top of the machine and
insert the 2 screws, turn
clockwise to tighten.
Align the pressure hose and
cord storage hook onto the
back of the machine and
secure with 2 screws.
IMPORTANT: Always make sure the trigger safety lock is in the LOCKED position when not in use or connecting
/disconnecting the pressure hose.
Always check water hose, pressure hose, lance and accessories are not damaged, broken or worn before use.
Preparing your pressure washer for use
LOCKED
Push the pressure hose firmly
to the water outlet and turn the
pressure hose collar clockwise
until tight.
UNLOCKED
A trigger safety lock is located
underneath the handle. The safety
lock should always be in LOCKED
position before connecting/
disconnecting the pressure hose to
the trigger handle.
To connect pressure hose to trigger
handle, press the pressure hose
release button and push pressure
hose to lock into position. Gently
pull the pressure hose to check the
connection.
After connecting
pressure hose, lance
and accessories
check they are
securely fitted and
lock in place before
turning on.
Whilst firmly pushing the lance
into the trigger handle turn
clockwise to lock into position.
To remove the lance from the trigger handle
firmly push and twist the lance anti-clockwise.
When unlocked pull to remove.
P
TI
Using your machine
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using this pressure washer.
WARNING: Don’t leave the pressure washer running when not in use, or more than 5 minutes to prevent overheating.
Before switching the machine on, the trigger handle must be squeezed to release water and to remove any airlocks in the
machine or pressure hose. Always release any build up pressure in the handle prior to disconnecting the hose.
Make sure water supply
is not connected. Firmly
push the water hose pipe
with suitable connector
onto the water inlet to
lock into position.
Connect water hose pipe to
a suitable water supply and
turn water on.
Push the ‘I’ switch to turn on.
The machine will run for a
few seconds then stop but no
water will be released.
Before plugging the machine
in, press the unlock safety
button on the trigger handle
and squeeze the trigger until
water starts to flow through
the nozzle.
Connect the power cord
to the mains supply via
an RCD adaptor.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Don’t aim the pressure
washer directly at people,
animals, plants, electrical
components, wires or the
pressure washer itself.
CAUTION
Push ‘O’ switch to turn off.
Using your machine
IMPORTANT: Always make sure the machine is switched off and the safety button on the trigger handle
is LOCKED before connecting/disconnecting the lance, nozzle or accessories.
Using your accessories
The jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture,
decking and boats.
To attach the jet/solution
nozzle. Fit the lance
with a firm push and
twist clockwise to lock
into place.
Hold down the release button on the
lance, push the jet nozzle and lance
firmly together until you hear an
audible CLICK. Release the button and
gently pull the jet nozzle to make sure it
is locked securely before use.
Squeeze the trigger on the
trigger handle to release a
high pressured water jet, and
start cleaning.
The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry.
As it is not fitted with a pressure regulator it is not suitable for use on delicate or painted surfaces.
To attach the turbo
nozzle, fit the lance
with a firm push and
twist clockwise to lock
into place.
Hold down the release button on the
lance, push the turbo nozzle and lance
firmly together until you hear an audible
CLICK. Release the button and gently pull
the turbo nozzle to make sure it is locked
secure before use.
Squeeze the trigger on the trigger handle to release
a high pressured water jet, and start cleaning.
Never use the turbo nozzle
on cars, tyres and engines.
CAUTION
Using your machine
IMPORTANT: When using detergent make sure you follow the dilution instructions and use Vax detergent only.
Detergent can only be used with the trigger handle, lance and detergent nozzle, or car/outdoor/rotary brush
if supplied. Detergent CANNOT be used with the jet and turbo nozzles.
Using detergent with your pressure washer
Unhook the detergent tube and
Switch the machine on and
insert into the detergent bag.
squeeze trigger to dispense the
Detergent is only dispensed with water and detergent mix.
the trigger handle, lance and
detergent nozzle or car/outdoor/
rotary brush if supplied.
After use rinse the pressure
washer to prevent blockages.
Inset the detergent tube into
a bucket of fresh water (Max
40�C), turn the machine on and
squeeze the trigger for 1 minute.
Always make sure the
pressure washer is
switched OFF before
connecting/disconnecting
the pressure hose,
lance, accessories or
detergent bag.
P
TI
Using your machine
IMPORTANT: When using your pressure washer the recommended working distance between the nozzle and surface
area or object to be cleaned is 30cm.
IMPORTANT: After connecting the pressure hose, lance and accessories check they are securely fitted and locked in
place before switching on.
IMPORTANT: Always release any pressure build up in the handle prior to disconnecting the hose and accessories .
IMPORTANT: Don’t use if the lance and accessories are damaged, broken or worn.
IMPORTANT: Always check brushes are clean and free from grit/hard debris before use.
Using the patio brush (included in selected models only, see ‘Included with your machine’)
Push the extension tube onto
the patio brush head and turn
clockwise to secure. Twist and
push the patio head collar to lock
the extension tube into position.
Attach the extension tube onto the
trigger handle, push firmly and
twist clockwise to lock into place.
Switch on the pressure washer
and squeeze the trigger to release
water spray.
The extension tube can be used
to extend all accessories and
ideal for hard to reach areas and
surfaces.
To remove the extension
tube from the trigger
handle, firmly push and
twist the extension tube
anti-clockwise to unlock.
Pull to remove.
To remove the patio brush
from the extension tube, twist the
patio head collar anti-clockwise.
Push and twist the patio brush
anti-clockwise to unlock, pull
to remove.
The outdoor brush is a soft
bristled brush ideal for making
easy work of cleaning garden
furniture.
The car brush is a soft bristled
brush and perfect for tackling
tough dirt on delicate
surfaces ideal for wheels
P
and car mirrors.
TI
Using your machine
Using the car brush (included in selected models only, see ‘Included with your machine’)
Attach the car brush to the trigger
handle. Firmly push the car brush
and trigger handle together, turn
clockwise to lock into position.
Switch on the pressure washer and
squeeze the trigger to release water
spray or water and detergent mix.
To remove the brush from the
trigger handle firmly push and
twist the lance anti-clockwise
to unlock. Pull to remove.
Using the outdoor brush (included in selected models only, see ‘Included with your machine’)
Attach the outdoor brush to the trigger
handle. Firmly push the outdoor
brush and trigger handle together,
turn clockwise to lock into position.
Switch on pressure washer and
squeeze trigger to release water
spray or water and detergent mix.
To remove the outdoor brush from
the trigger handle firmly push and
twist the lance anti-clockwise
to unlock. Pull to remove.
Using the rotary brush (included in selected models only, see ‘Included with your machine’)
Whilst firmly pushing the rotary
brush into the trigger handle turn
clockwise to lock into position.
Switch on pressure washer and
squeeze trigger to release water
spray or water and detergent mix.
To remove the rotary brush from
the trigger handle firmly push and
twist the lance anti-clockwise to
unlock. Pull to remove.
Taking care of your machine
IMPORTANT: Always rinse fresh water through your pressure washer and accessories for 1 minute after using
detergent to prevent blockages.
Maintenance
To access the water
filter unscrew water inlet
connector and remove.
To remove the water filter,
pinch the inner water filter
tab with pliers and gently pull.
The water filter can be
rinsed under running
water periodically.
IMPORTANT: Before storing your machine always make sure no water remains in the pressure washer or hose
/accessories to prevent frost damage. Keep in a dry place above zero degrees and out of the reach of children.
Storage
Always store tools, power cord and pressure hose into allocated
storage slots.
Let’s talk technical
Removing a blockage in the lance and nozzles
To remove the lance from trigger
handle firmly push and twist
the lance anti-clockwise, when
unlocked pull to remove.
To remove the nozzles press the
nozzle release button and pull.
Insert the nozzle cleaning
tool into the end of lance
and nozzles to remove
any dirt or debris.
Before carrying out any
maintenance make sure
the machine is switched off
and unplugged.
CAUTION
What to do if it goes wrong
Problem
Solution
• Check the ‘This pack contains’ panel on the box to make sure the part
is included with your machine.
There is an
accessory missing
Why won’t the pressure
washer turn on?
Why won’t the water/
detergent dispense?
Why won’t the
pressure washer reach
operating pressure?
• Make sure the on/off switch is set to the ‘I’ position.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with
a British 13amp fuse.
• Check if your RCD has been tripped, if it has tripped, reset it.
• The power cord maybe damaged.
• The pump may have stopped, make sure the on/off switch is set to the
‘I’ position and check the plug fuse.
• The pump may have stopped. This may be because of overheating due
to poor water supply. Check the water flow rate to your water supply.
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• There may be an air lock. To unlock the trigger safety lock, squeeze
the trigger to release water before the machine is switched on.
• Check assembly of detergent application bottle. Go to ‘Using your
machine.’ Nozzle/accessory may be blocked, clear any blockages and
clean nozzle. Go to ‘Lets talk technical.’
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• Nozzle may be blocked, clear any blockages and clean nozzle.
Go to ‘Lets talk technical.’
• Remove and clean the water inlet filter. Go to ‘Taking care of
your machine.’
• Check the water flow rate to your water supply.
Getting in touch
† Registration required. Terms and conditions apply, see vax.co.uk for details.
Accessories
Don’t forget your accessories!
Order at: www.vax.co.uk/spares-and-solutions
Universal detergent
1-9-133398-00
Patio & Decking detergent
1-9-133401-00
Wash & Protect vehicle detergent
1-9-133400-00
Standard lance
1-9-133749-00
Detergent nozzle
1-9-133759-00
Attachable detergent bottle
1-2-133752-00
Trigger handle
1-2-133750-00
Universal detergent to aid the break down and removal of stubborn dirt, moss, and grime.
Patio & decking detergent to aid the break down and removal of stubborn dirt from patio
and decked areas.
Wash & protect vehicle detergent to aid the removal of road dirt, oil and grease from vehicles,
and provide short term protection against weathering conditions.
Standard lance connection between your trigger handle and attachments.
A detergent nozzle to directly apply detergent to surfaces to help loosen dirt, moss, and grime.
A detergent nozzle to directly apply detergent to surfaces to help loosen dirt, moss, and grime.
A smooth shape hand handle with an easy squeeze trigger and a built in safety lock for easy
on/off trigger release.
Jet nozzle
1-9-133754-00
Turbo nozzle
1-9-133753-00
Patio cleaning set
1-9-133767-00
Rotary brush
1-9-133766-00
Car brush
1-9-133765-00
Outdoor brush
1-9-133769-00
Extension tube
1-9-133768-00
Replacement hose (10m)
1-9-133751-00
Jet nozzle to apply concentrated pressure to dislodge dirt and grime on all surface types.
A high pressure turbo nozzle to blast away tough embedded dirt from high traffic areas.
A large circular cased brush, supplied with an extension tube for cleaning concentrated areas
quickly and efficiently. Ideal for: Patios, Decking, Driveways, Garage doors.
A firm bristled brush with 360 degree rotation, providing extra scrub power for an extra clean.
Ideal for: Car alloy wheels, Car grills.
A soft bristled brush, perfect for agitating tough dirt from sensitive surfaces.
Ideal for: Car mirrors, Car body.
A handy outdoor brush, perfect for gently removing dirt from various outdoor surfaces.
Ideal for: Garden furniture, Conservatories.
An additional connection tube providing you extra reach.
An additional high pressure hose, highly durable and resistant to weather conditions.
Notes
Vax EU Declaration of Conformity (DoC)
Date of Issue:
01.01.2017
Directives:
2006/95/EC, 2006/42/EC, 2004/108/EC,
2000/14/EC (2005/88/EC), 2014/30/EU,
2011/65/EU
Conforming Apparatus:
P86-P2-T
Manufacturer:
Vax Ltd
Harmonised Standards Referenced or Applied:
EN60335-1; EN60335-2-79:2012;
EN62233:2008;
EN55014-1:2006+A1:2009+A2:2011
EN55014-2:1997+A1:2001+A2:2008;
EN61000-3-2:2006+A1:2009+A2:2009;
EN61000-3-3:2008;
2000/14/CE (2005/88): The appliance is defined at no27 of the annex I.
Conformity evaluation procedure according to annex V.
Measured acoustic power level LwA: 92 dB(A)
Guaranteed acoustic power level LwA: 93 dB(A)
Vax Ltd hereby declare that the equipment name has been designed (alternative:) tested
and found to comply with the relevant sections of the above referenced specifications.
The unit complies with all essential requirements of the Directives.
This Declaration is issued under sole legal responsibility of Vax Ltd.
Signed:
Name:
Rob Atkins
Position:
Vice President of Operations
email: [email protected] website: vax.co.uk
EU Statement of Compliance: Manufacturer/EU importer: Vax Limited, hereby on our own responsibility, declare that the
P86-P2-T is manufactured in compliance with the following Directives: Safety: 2006/42/EC Machinery Directive.
EMC: 2014/30/EU Electromagnetic Compatibility Directive.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
© 2017 Vax Limited. All rights reserved. The VAX trade mark and Vax lozenge are the property of Techtronic Floor Care
Technology Ltd and are registered in the EU and may be pending or registered in other countries.
Machine not suitable
for connection to the
potable water mains