CORTINA

WIDE DERBY EFFECT + UV/STROBE

Item ref: 151.609UK

User Manual

Version 1.0

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

Introduction

Thank you for your purchase of the QTX CORTINA LED light effect. This model can deliver an extra wide array of colourful shapes coupled with powerful UV and strobe effects. Please read and keep this user manual to get the best from your purchase and avoid damage through misuse

SAFETY SYMBOL AND MESSAGE CONVENTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

Warning

To prevent the risk of fire or electric shock, avoid contact with moisture or humid environments.

No user serviceable parts inside – Do not open the case – refer all servicing to qualified service personnel.

Safety

Check for correct mains voltage and condition of power lead before connecting to a power outlet.

Placement

• Use the included mounting bracket to fix to a stand or lighting truss

• Use secondary safety fixings if mounting overhead.

• Ensure adequate airflow around the fixture housings

• Ensure adequate access to controls and connections

Cleaning

• Use a soft cloth with a neutral detergent to clean the casing as required

• Do not use strong solvents for cleaning the unit

In the box

Please open the package carefully and check that all contents are present and in good condition.

Contact your retailer if any part is missing or broken.

• CORTINA LED light effect

• Mounting bracket

• UK mains plug to IEC lead

151.609UK User Manual

Rear panel

Standalone operation

Standalone settings for the CORTINA include Derby, Flash, UV on/off, Auto and Sound-activated modes.

From the onboard menu, it is possible to pre-set the operating mode as described in the table below.

Mode

 xxx 

 x 

 xx 

 xx 

 xx

 x x

Display Function Press ENTER Press ENTER

 -  DMX start address

 Red derby

 Green derby















Blue derby

White derby

  rotation speed

Color change derby   colour speed

Color mix derby   colour speed

Strobe derby   strobe speed

Auto colour derby   colour speed

Strobe off





 Strobe speed

UV On

  LED speed









rotation speed

White dimmer







UV Off

Auto Mode 1

Auto Mode 2







Auto Mode 3

Sound Mode 1 (last 2 digits are beat steps)

Sound Mode 2 (last 2 digits are beat steps)   Mic. sensitivity

 Sound Mode 3 (last 2 digits are beat steps)

151.609UK User Manual

DMX operation

The CORTINA light effect is also compatible with standard DMX512 control.

Connect a DMX controller to the CORTINA using an XLR DMX lead into the DMX IN connector (****)

Connect further DMX light fixtures that are being controlled from the DMX OUT connector (****) to the DMX

IN of each fixture in a daisy-chain.

Set the DMX start address of the CORTINA and all other lighting fixtures in the chain to accommodate all the required channels for each. The CORTINA has 7 DMX channels and the table on the following page is described with the DMX start address set to 

DMX Channel Value Function

1

2

3

4

5

6

7

001 - 009

010 - 255

000

001 - 017

018 - 035

036 - 053

054 - 071

072 - 089

090 - 107

108 - 125

126 - 143

144 - 161

162 - 179

180 - 197

198 - 215

216 - 233

234 - 251

252 - 255

000 - 009

010 - 255

000 - 042

043 - 084

085 - 126

127 - 169

170 - 211

212 - 253

254 - 255

000 - 011

012 - 255

000 - 006

007 - 146

147 - 255

000 - 009

010 - 049

050 - 099

100 - 149

150 - 199

200 - 250

250 - 255

UV off

UV on

White LED off

White LED 1 + 2 + 3 + 4

White LED 2

White LED 3

White LED 4

White LED 1

White LED 2 + 3

White LED 1 + 4

White LED 3 + 4

White LED 1 + 2

White LED 2 + 4

White LED 1 + 3

White LED 2 + 3 + 4

White LED 1 + 2 + 3

White LED 1 + 2 + 4

White LED 1 + 3 + 4

Derby off

Derby colour combinations

Derby + White + UV

UV only

White only

Derby only

White + UV

Derby + UV

Derby + White

No Strobe

Strobe - fast to slow

Rotation off

Rotation position

Continuous rotation from slow to fast

Manual Mode, Available from CH1-CH6

Same as Auto mode 1, from fast to slow

Same as Auto mode 2, from fast to slow

Same as Auto mode 3, from fast to slow

Sound Mode 1

Sound Mode 2

Sound Mode 3

151.609UK User Manual

Specifications

Power supply

Weight

Power consumption

LED: power

Modes

DMX connection

DMX channels

Dimensions

110-240Vac, 50/60Hz (IEC)

60W

2 x 10W RGBW derby + 12 x 4W UV/strobe

Auto, sound-activated, master-slave, DMX512

XLRM in, XLRF out

7

380 x 200 x 160mm

2.53kg

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Copyright© 2019. AVSL Group Ltd.

151.609UK User Manual