Assembly Instruction
Identify all parts packed in carton against the parts list. Remove all protective material carefully and
avoid cutting the surface of the furniture while removing the bubble wrap.
Put the table top upside down a flat surface. Attach the legs with Big Bolts, washers and lock washers,
don't tighten at this|time.
Connect the legs with the Center Rings, tighten with Small Bolts, washers,lock washers. Progressively
tighten all the bolts| until secure.
Turn the table on its legs, you can adjust foot plugs to level table if needed.
| Parts List | Description Quantity
Table Top 1
Table Leg 4
<> Center Ring 1
(07D Stud 4
O
E Bolt 4
a a Big Washer
Small Washer
OO Big Lock Washer 4
D Small Lock Washer 4
= Locker Nut 4 |
L == = = = = min en =
">