HOME
DECORATORS
COLLECTION
SK19171BR1 PRESCOTT MODULAR KITCHEN PANTRY 78"Hx22"Wx20"D
INV#99505
ASSEMBLY INSTRUCTIONS
Made In China
VW \
/
7
VW Y
VAVAVAVAVA
NA A AA
1/16
Thank you for purchasing this quality product. Be sure to check all
packing material carefully for small parts, which may have came
loose inside the carton during shipment. Count all parts and material
hardware, then compare with parts list to be sure all parts are
present, If any parts are missing or damaged, phone, fax, or mail to
our Customer service Department for efficient and speedy service.
Please indicate the model number and code letter of part(s) needed.
IMPORTANT NOTE: Follow instructions listed below in proper
sequence as numbered to assure fast,easy and correct assembly.
PARTS LIST
A
S
TOP PANEL-1PC
\
LEFT SIDE PANEL-1PC
D
/
\
BOTTOM PANEL-1PC
E
V
FRONT CROSS BRACE-1PC
<>
S
ADJUSTABLE SHELF-3PCS DOOR-1PC BOTTOM FIXED PANEL-1PC
BACK PANEL-1PC SHELF-4PCS DIVIDER-3PCS
2/16
DRAWER LEFT SIDE
PANEL-1PC
DRAWER RIGHT SIDE
PANEL-1PC
DRAWER BACK PANEL-1PC
Q
DRAWER BOTTOM PANEL-1PC
a b С
| С «= te
CAM
WOOD DOWEL-22PCS LOCK BOLT-19PCS CAM LOCK-19PCS
d € e f
LONG SHORT 5/8"L ROUND
PLASTIC COVER-8PCS PLASTIC COVER-2PCS HEAD SCREW-30PCS
g h |
1/2"L FLAT
MAGNET-1PC HINGE-2PCS HEAD SCREW-14PCS
¡ к | m
NX
Y O NS
1"L FLAT
KNOB-1PC KNOB BOLT-1PC SHELF PIN-12PCS | HEAD SCREW-4PCS
10mmL FLAT
HEAD SCREW-2PCS
CARD CLIP
PLATE-1PC
| 2
П О <
#2 oF д
RECTANGLE
METAL PLATE
5/8"L FLAT
HEAD SCREW
3 4 5
x1 С LL я ча
PLASTIC ANCHOR
PLASTIC
BAND
1-1/2"L FLAT
HEAD SCREW
ANTI-TIPPING HARDWARE PACKAGE
NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE
3/16
HOW TO SEPARATE GLIDES
SAFETY RELEASE TAB
PRIOR TO ASSEMBLY, WE SUGGEST SEPARATING THE INNER GLIDES FROM THE OUTER-GLIDES,
SIMPLY PULL THE LEFT/RIGHT INNER GLIDES FROM THE OUTER GLIDES EXPOSING A SMALL
BLACK SAFETY RELEASE TAB, BY PUSHING THE SAFETY RELEASE TAB. YOU WILL BE ABLE TO
SEPARATE THE GLIDES.
4/16
NOTE: e UPON OPENING, THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST
AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT. IN
ORDER TO PREVENT DAMAGE DURING ASSEMBLY. PLEASE ASSEMBLE THIS ITEM
WITH AT LEAST TWO PEOPLE.
NOTE: TURN THE CAM-BOLT SCREWS UNTIL THEY
ARE TIGHT, THE SHOULDER SHOULD BE
AGAINST THE SURFACE OF THE PART.
. — e
se ESS 4 À,
CS CN CRE CE)
==
PASSE SE ER
NR, a A ote 0 PV ES
HOW TO USE THE CAM-TOOL
— ~~ у ARROW
—3
NOTE: e THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS.
5/16
FIG 1
e TIGHTEN THE MAGNET (g) ONTO THE FRONT CROSS BRACE (E) BY SING THE 5/8"L ROUND
HEAD SCREW (f) AS SHOWN.
e TIGHTEN THE HINGE (h) ONTO THE LEFT SIDE PANEL (B) BY USING THE 1/2"L FLAT HEAD
SCREW (i).
6/16
FIG 2
e INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE LEFT SIDE PANEL (B)
AND THE RIGHT SIDE PANEL (C) AS SHOWN.
e JOIN THE FRONT CROSS BRACE (E), THE TOP FIXED PANEL (F) AND THE BOTTOM FIXED
PANEL (I) TO THE LEFT SIDE PANEL (8) AND THE RIGHT SIDE PANEL (C) BY USING THE WOOD
DOWEL (a) FIRST.
e TIGHTEN CAM LOCK BOLT (b) WITH THE CAM LOCK (c) IN THE PRE-DRILLED HOLES.
7/16
FIG 3
e INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE BOTTOM PANEL (р).
e JOIN THE BOTTOM PANEL (D) TO THE ASSEMBLED PART BY USING THE WOOD DOWEL (a) FIRST.
e TIGHTEN CAM LOCK BOLT (b) WITH THE CAM LOCK (c) IN THE PRE-DRILLED HOLES.
e COVER THE CAM HOLES WITH THE LONG PLASTIC COVER (a).
8/16
FIG 4
Y
e INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE TOP PANEL (A).
e JOIN THE TOP PANEL (A) TO THE ASSEMBLED PART BY USING THE WOOD DOWEL (a) FIRST.
e TIGHTEN CAM LOCK BOLT (b) WITH THE CAM LOCK (c) IN THE PRE-DRILLED HOLES.
e COVER THE CAM HOLES WITH THE LONG PLASTIC COVER (d).
9/16
FIG 5
e INSERT THE SHELF PIN (1) INTO THE DESIRED POSITION AND PLACE THE ADJUSTABLE
7
>.
LL
<>
PR
>
£9
XX
V
SHELF (G) ABOVE THE SHELF PIN (1).
e INSERT THE SHELF (K) INTO THE DIVIDER (L) AND PUT THE ASSEMBLED PART INTO THE
CABINET AS SHOWN.
10/16
FIG 6
e TIGHTEN THE BACK PANEL (J) BY USING THE 5/8"L ROUND HEAD SCREW (f) AS SHOWN.
— 11/16 — — —
FIG 7
e ATTACH THE DOOR (H) TO THE ASSEMBLED PART BY USING THE 1/2” L FLAT HEAD SCREW (i).
e TIGHTEN THE KNOB (j) ONTO THE DOOR (H) BY USINGTHE KNOB BOLT (k) AS SHOWN.
12/16
FIG 8
e INSTALL THE WOOD DOWEL (a) AND THE CAM LOCK BOLT (b) INTO THE
DRAWER FRONT PANEL (M).
® JOIN THE DRAWER LEFT SIDE PANEL (N) AND THE DRAWER RIGHT
SIDE PANEL (O) TO THE DRAWER FRONT PANEL (M).
e ONCE JOINED, TIGHTEN CAM LOCK BOLT (b) WITH THE CAM LOCK (c) IN THE
PRE-DRILLED HOLES.
e COVER CAM HOLES WITH THE SHORT PLASTIC COVER (e).
e SLIDE THE DRAWER BOTTOM PANEL (Q) INTO THE GROOVES ON THE
DRAWER LEFT SIDE PANEL (N) AND THE DRAWER RIGHT SIDE PANEL (O).
e JOIN THE DRAWER BACK PANEL (P) TO THE ASSEMBLED DRAWER PART AND
TIGHTEN THE DRAWER BACK PANEL (P) BY USING THE 1"L FLAT HEAD SCREW (m)
THROUGH PRE-DRILLED HOLES ON DRAWER SIDE PANELS.
e TIGHTEN THE CARD CLIP PLATE (0) TO THE DRAWER FRONT PANEL (M) BY USING THE
10MM L FLAT HEAD SCREW (n).
——— 1316 — — —
FIG 9
oe INSERT DRAWER INTO THE ASSEMBLED PART.
14/16
FIG 10
® TIGHTEN THE RECTANGLE METAL PLATE (1) TO THE REAR OF THE TOP PANEL (A) BY
USING 1/2" FLAT HEAD SCREW (2).
@ PLACE THE ASSEMBLED PRESCOTT MODULAR KITCHEN PANTRY AT THE DESIRED POSITION.
MARK THE INSERTION POINTS FOR THE PLASTIC ANCHOR (3).
® USING THE PROPER HARDWARE FOR YOUR WALL TYPE, DRILL 1/4" HOLES INTO THE WALL.
® TIGHTEN THE RECTANGLE METAL PLATE (1) TO THE PLASTIC ANCHOR (3) BY USING THE 1-1/2"
FLAT HEAD SCREW (5).
— 15/16 — — —
FIG 11
e USING THE PLASTIC BAND (4) CONNECT TWO RECTANGLE METAL PLATES (1).
16/16
">
