DreamLine Unidoor 42 to 43 in. x 72 in. Frameless Hinged Shower Door Installation instructions
Add to My manuals43 Pages
advertisement
UNIDOOR Style C
S
HOWER
D
OOR AND
I
NLINE
P
ANEL
I
NSTALLATION
I
NSTRUCTIONS
IMPORTANT
DreamLine ® reserves the right to alter, modify or redesign products at any time without prior notice.
For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com
STEP 1:
STEP 2:
STYLE C
For more information about DreamLine ® Shower Doors, Tub Doors & Enclosures, please visit DreamLine.com
UNIDOOR STYLE C ©2018 DreamLine. All Rights Reserved
©2018 DreamLine. All Rights Reserved
UNIDOOR/UNIDOOR-LS/UNIDOOR LUX/UNIDOOR PLUS
S
INGLE
S
HOWER
D
OOR
I
NSTALLATION
I
NSTRUCTIONS
IMPORTANT
DreamLine ® reserves the right to alter, modify or redesign products at any time without prior notice.
For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com
Model #s
SHDR-20237210F-##
SHDR-20247210F-##
SHDR-20257210F-##
SHDR-20267210F-##
SHDR-20277210F-##
SHDR-20287210F-##
SHDR-20297210F-##
SHDR-20307210F-##
## = Finish
01 = Chrome
04 = Brushed Nickel
06 = Oil Rubbed Bronze
09 = Satin Black
HFR=Half-Frosted
NOTE: The glass-to-wall hinges for this door must be attached into studs or to preinstalled
2” × 6” wood reinforcement behind the wall.
Right-hand installation shown
Please review this entire manual prior to beginning installation.
ATTENTION:
Please see specific installation instructions on page 2 when using the
Frosted Band glass option.
For more information about DreamLine
®
products please visit DreamLine.com
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
Style “A” (single door installation shown) with Half-Frosted Glass:
NOTE: This model features the Half-Frosted glass option. The textured surface on the door glass should be installed to face outside of the shower.
The door glass can be flipped for left or right-hand installation.
Hinged Left installation Hinged Right installation
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
2
©2018 DreamLine. All Rights Reserved
Table of Contents
Section Title
Unidoor Styles
Preparation
Tools
Required Reinforcement locations
Glass and Hinge hole details
Detailed Diagram of Shower Door Components and Parts List
Installation Instructions
Page #
4-7
8
9
10
11-12
13
14-21
Adjustable Hinge Details
Handle
Vinyl Seals
Product Maintenance
17-18
19
19-20
22
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
3
©2018 DreamLine. All Rights Reserved
UNIDOOR STYLES-
Models with Glass-to-Wall hinges
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
4
©2018 DreamLine. All Rights Reserved
Models with Glass-to-Glass Hinge panels: For Glass-to-Glass Hinge Door models:
Use the installation manual that is packaged with the Hinge panel glass first.
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
5
©2018 DreamLine. All Rights Reserved
STYLE A
UNIDOOR Single shower door 23”- 30”
Refer to detailed diagram on page 12 of this manual to begin the installation.
STYLE B *
UNIDOOR Shower door 23” – 30” with 6” small or 12”-30” large stationary panel with a Support Bar
UNIDOOR-LS Shower door 23” – 30” with 12”-30” large stationary panel with an L-Bar™
STYLE C *
UNIDOOR Shower door with 12”-30” large stationary panel with Support shelves
STYLE D *
UNIDOOR LUX Shower door 23”~30” with 6” small or 14”-30” large stationary panel with glass-towall brackets
STYLE E *
UNIDOOR LUX Shower enclosure with 30” return stationary panel with glass-to-wall brackets
STYLE F *
UNIDOOR PLUS Shower door 23”~30” with 6”-34” in-line stationary panel secured using u-channel
STYLE G *
UNIDOOR PLUS Shower door 23”~30” with 6”-34” in-line half wall panel secured using u-channel
STYLE I *
UNIDOOR PLUS Shower enclosure with 6”-34” in-line stationary panel and 30”-34” return panel secured using u-channel
STYLE J *
UNIDOOR PLUS Shower enclosure with 12”-36” in-line half wall panel and 30”-34” return panel secured using u-channel
STYLE L *
UNIDOOR PLUS Shower enclosure with 30”- 34” return stationary panel secured using u-channel
STYLE L1 *^
UNIDOOR X Shower door 23”~30” with 6” or 24” hinge panel and with 30”- 34” full height return panel secured using u-channel
STYLE M *^
UNIDOOR X Shower door 23”~30” with 6” or 24” hinge panel secured using u-channel
STYLE M1 *^
UNIDOOR X Shower door 23”~30” with 6” or 24” hinge panel and with 6”, 6-1/2”, 14”, 14-1/2”, 22” or 22-1/2” full height inline panel secured using u-channel
6
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
STYLE M2 *^
UNIDOOR X Shower door 23”~30” with 6” or 24” hinge panel with 12”, 18”, 24” or 26” inline buttress panel secured using u-channel
STYLE M3 *^
UNIDOOR X Shower door 23”~30” with 6” or 24” hinge panel, with 6”, 6-1/2”, 14”, 14-1/2”, 22” or 22-1/2” full height inline panel and 30” - 34” full height return panel secured using u-channel
STYLE M4 *^
UNIDOOR X Shower door 23”~30” with 6” or 24” hinge panel, with 12”, 18”, 24” or 26” in-line buttress panel and 30”- 40” buttress return panel secured using u-channel
* For the panel installation instructions, please refer to the separate manual included in the panel glass packaging.
^ For Glass-to-Glass door installation, please refer to the separate manual included in the hinge panel glass packaging.
NOTE: The Unidoor series doors and enclosures are reversible for left or right-hand installation. This manual will show the right-hand installation. For a left-hand installation, simply begin on the opposite wall and reverse the orientation of the parts as necessary.
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
7
©2018 DreamLine. All Rights Reserved
Preparation
1.
Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully.
Check that all of the necessary parts are included in the package(s) by checking off the components on the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing defect, or is missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that DreamLine ® will not replace any damaged products or missing parts free of charge after 3 business days or if the
product has been installed. Please contact DreamLine ® if you have any questions and please provide an order number, job name or other proof of purchase to help identify the original order.
2.
Please note that you should consult your local building codes with questions about installation compliance standards. Building and plumbing codes may vary by location, and
DreamLine ® is not responsible for code compliance standards for your project and will not
accept any returns.
3.
If this unit is going to be installed in a new construction, install all of the required plumbing and drainage before installing the shower. Use a competent and licensed (if required by local code)
plumber for all plumbing installation.
4.
Make sure that prior to beginning the installation, the surfaces are leveled and solid and will be able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular installation surface level, radius corners or improper angle of side walls will result in serious problems for your installation. Please note that some adjustments and drilling will be necessary during the installation process.
5.
Protect all primary surfaces of the product during installation. Never set glass down directly onto a hard surface unless instructed. Leave corner protectors in place until necessary to remove them.
Always use a piece of wood or cardboard to protect the bottom edge and corners of the glass prior to and during installation to prevent damage.
6.
This unit must be installed upon a level finished threshold and against plumb finished walls.
7.
This door is extremely heavy and the hinges on this door must be attached into studs or to preinstalled 2” × 6” wood reinforcement behind the wall. See pages 9, 10 & 11 for details.
8.
The single Unidoor installation does NOT have any adjustment for out-of-plumb or out-of-level conditions. Please verify that the walls are plumb and the threshold is level before proceeding with the installation.
9.
Professional installation is recommended for this heavy glass frameless shower door.
NOTE: DO NOT attach the handle to the door glass until instructed.
DO NOT use the handle to lift the glass during installation. This may result in damage to the glass and/or serious injury. Always use an assistant and/or a professional grade glass
suction cup when handling heavy glass panels.
8
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
Tools Required
©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
9
©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
10
©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
11
©2018 DreamLine. All Rights Reserved
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
12
©2018 DreamLine. All Rights Reserved
Detailed Diagram of Shower Door Components
4
1
31
5
2
6 The glass surface with the ClearMax™ label must be installed to face inside of the shower
7
8
Packing List
Part#
Description Qty
Part#
Description
01 Door glass
02 Handle
1pc
1pc
06 Side strip (hinge side)
07 Bottom anti-water strip (sweep)
04 Countersunk screw ST5×70 8pcs 08* L-shaped strip (strike)
Qty
1pc
1pc
1pc
05 Hinge with Adjustable angle 2pcs 31 PVC hinge spacer 4pcs
*Part #8 “L-shaped strip” used with single door installation only.
NOTE: Unpack your unit carefully and inspect it. Lay out and identify all parts using the detailed diagram and packing list in this manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing, please contact DreamLine ® for replacement.
NOTE: Retain these installation instructions for future reference.
13
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
Single Shower Door Assembly and Installation
NOTE: The following shower door installation instructions should be used as a general guide and prerequisite to the installation of the UNIDOOR, UNIDOOR-LS, UNIDOOR LUX and UNIDOOR PLUS models. Before you begin the installation, please check your finished opening size. Specific size information can be found on DreamLine.com
ATTENTION:
This door is extremely heavy and the hinges on this door must be installed into studs or to preinstalled 2 × 6 wood
reinforcement behind the wall.
NOTE: DO NOT attach the handle to the door glass until instructed.
DO NOT use the handle to lift the glass during installation. This may result in damage to the glass and/or serious injury. Always use an assistant or a professional grade glass suction cup when handling the door glass.
1.
Attach the Hinges (05) to the Door Glass (01). Use one hinge gasket per side. Attach the hinges centered in the notches and square with the edge of the door glass. Fully tighten the hinge bolts. (Fig 1) outside
Never set your glass down directly onto a tile or concrete floor.
Always use a piece of wood or cardboard and leave the corner pads and protective shims on the glass until it becomes necessary to remove them. This will protect the bottom edge and corners from damage which could lead to breakage. inside
ATTENTION:
For Styles E, I, J & L that have return panels:
Fig. 1
Please check the model dimensions for proper placement of the Door Glass (01) so that the door glass will align correctly with the return panel glass.
14
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
2.
The Door Glass (01) ships with four 5/8” shims attached to the top (2pcs) and bottom (2pcs).
Determine the swing of your door and only remove the shims from the top of the door glass, leaving the bottom shims in place. Set the Door Glass (01) onto the threshold at the desired location and check for level.
These 5/8” shims will leave the proper spacing at the bottom of the door glass and will ensure that the door height finishes at 72”, but always confirm with a measurement. Carefully butt the door with the hinged side against the wall, adjust its position and check for plumb with a level. (Fig 2)
ATTENTION:
Check the door glass with a level to verify that it is plumb before marking the hinge positions.
TIP:
When installing the door along with panel glass, use the 72" Anti-Water strip (Inline) (19) that is packed with the panel glass as a height reference to be sure that the door height will match the panel glass at 72".
3.
Hold the door in place and mark the drill holes for both Hinges (05) on the wall. Set the door aside and use a Ø 1/4” drill bit to drill holes up to the stud. Drill 1/8” pilot holes into the stud if necessary.
IMPORTANT:
The included PVC hinge spacers (31) are provided to compensate for minor outof-plumb wall conditions. Use only as necessary as their use could compromise the opening size of your shower. Please see Fig 4 for an installation example*.
4.
Place the Door Glass (01) back onto the threshold along with the 5/8” spacers and attach both hinges to the wall with two
Countersunk screws ST5×70 (04) on the hinge from outside of the shower. Then open the door and install the remaining screws to both wall plates from the inside.
(Fig 3 and Fig 4)
1 outside
3 outside
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
2
Fig. 2
Ø 1/4"
ATTENTION:
This door is extremely heavy and the hinges on this door must be attached to the studs or to preinstalled 2 × 6 wood reinforcement behind the wall.
Fig. 3
15
©2018 DreamLine. All Rights Reserved
TIP: The PVC hinge spacer can also be used as a template to assist with marking the hinge mounting holes.
*Only use the PVC hinge spacer to correct for minor out-of-plumb wall conditions.
ATTENTION:
As viewed from inside the shower, the hinge plate is very close to the drilled holes in the wall and might get scratched while installing the long screws. Be careful not to scratch the hinge surfaces during installation.
(OPTIONAL)
5.
Carefully remove the hinge plates from the Hinges
(05) (Fig 5.1), remove the Door Glass (01) and carefully set it aside.
Install the remaining Countersunk screws ST5 x 70
(04) into the wall, place the Door Glass (01) (with the 5/8” bottom spacers still attached) back into position onto the Hinges (05) and re-assemble the
Hinges (05). Once the door glass is secure, remove the 5/8” spacers from beneath the Door Glass (01).
(Fig 5)
1
3 inside
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
Fig. 4 inside 2
4
Fig. 5
1
2
3 inside
16
Setting the Adjustable Hinges
The Adjustable hinges are pre-set to overclose to 85º and are adjustable up to 90º after the door is installed. Once the door glass is installed, simply loosen the Allen set screws and position the door to the desired closed position. While holding the door in the new closed position, retighten the Allen screws and your door will now self-center to the chosen closed position.
5a. Make sure the door glass is plumb and the edge of the hinge is installed flush with the glass edge. Center the hinge in the glass notch and tighten the faceplate screws (Fig 5a).
Be careful not to scratch the finished surfaces of the hinge during installation.
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved view from inside the shower
Fig 5a
17
©2018 DreamLine. All Rights Reserved
5b. The hinges are factory set to 85 degrees.
You can change this angle by using the adjustment screws on the hinge plate.
(Fig 5b)
inside outside
Fig 5b
5c. Use the supplied Allen Key to loosen the adjustment screws on the inside hinge plate, adjust the door to the desired angle (90 degrees for example) then retighten the adjustment screws
(Fig 5c). Be sure that you create a tight seal with the supplied strike vinyl when the door is in the closed position.
View from inside of shower
Fig 5c
inside outside
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
18
©2018 DreamLine. All Rights Reserved
6.
Mount the Handle (02) to the Door Glass (01).
(Fig 6)
7.
Measure the bottom of the Door Glass
(01) from end to end to determine the
Handle side strip end
1 actual width of the door. Cut the
Bottom anti-water strip (07) to the size of your measurement and notch approximately 3/8” off the inner side of inside the Bottom anti-water strip as shown.
Press the Bottom Anti-water strip (07) tightly onto the bottom edge of the
Door Glass (01). outside
3
NOTICE:
Make sure the Bottom anti-water strip is flush to the vertical edge of the
Handle side of the Door Glass.
(Fig 7) inside outside outside outside
Fig. 6
3/8" +/- inside
2
4 inside
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
Fig. 7
19
©2018 DreamLine. All Rights Reserved
8.
Take three measurements:
from the top edge of the Door Glass (01) to the upper body of the top Hinge (05) (+) 7/8”
from the lower body of the upper Hinge to the upper body of the bottom Hinge (+) 1-3/4”
from the lower body of the bottom Hinge to top of the installed Bottom anti-water strip (07)
(+) 1-7/8”
Cut the Side strip (06) according to the measurements.
Notch the cut strips to be able to slide them into the Hinge and around the sweep vinyl to cover the space to the wall.
Press the cut strips onto the vertical edge of the
Door Glass.
(Fig 8)
1
3
5
Into the hinge
Into the hinge
Into the hinge
Into the hinge
2
4
6
Around sweep vinyl
ATTENTION; Prior to the next step, please be sure that the section of the wall where you need to attach the L-shaped strip
(08) is clean, dry and free from soap, oil and any construction debris.
9.
Hold the door in the closed position, parallel to the threshold. Place the *L-shaped strip (08) onto the door edge. Make sure that the door glass makes good contact with the entire length of the
1
Fig. 8 inside
L-shaped strip (08), and mark its location on the wall.
Open the door. Remove the tape backing from the adhesive strip and firmly press the L-shaped strip (08) to the wall.
Allow 24 hours for the adhesive to fully setup before use.
(Fig 9 and Fig 10)
*NOTE:
The above procedure for installing the L-shaped strip (08) is for the Unidoor Style A single shower door installation only. When installing another model with additional panel glass, please
2 door
Allow the adhesive to set up for 24hrs after installation refer to the separate panel installation manual located in the glass packaging for model specific instructions. The vinyl seals that apply to the panel glass are packaged with the panel glass.
Fig. 9
20
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
Fig. 10
If the model includes additional panel glass, refer to the manual that is packaged with the panel glass to continue with the installation.
21
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
Product Maintenance
BASES and BACKWALLS: To ensure long-lasting life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
GLASS: To ensure long-lasting life for your glass shower products: wipe them off after each use with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry).
To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface.
HARDWARE: To ensure a long-lasting finish: wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.
NOTE: To maximize the life of your door, it is important to regularly inspect the glass and other hardware for misalignment, proper attachment, and/or damage. Contact DreamLine
®
with any questions or concerns
.
DreamLine
®
shower doors and enclosures are designed not to leak when installed properly and the flow of water is not pointed directly at the wallmounted hinges or vinyl seals.
22
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
©2018 DreamLine. All Rights Reserved
TEL: 866-731-2244
FAX: 866-857-3638
D REAM L INE.COM
For more information on DreamLine ® Shower Doors and Enclosures please visit DreamLine.com
23
UNIDOOR Single Shower Door manual Ver 2 Rev 6 02/2018
I
NLINE
P
ANEL
- S
TYLE
C
S
HOWER
P
ANEL
I
NSTALLATION
I
NSTRUCTIONS
IMPORTANT
DreamLine ® reserves the right to alter, modify or redesign products at any time without prior notice.
For the latest up-to-date technical drawings, manuals, warranty information or additional details please refer to your model’s web page on DreamLine.com
This inline panel is used with the following models:
UNIDOOR Style C
ELEGANCE Style C
Inline panel with shelves
Right-Hand panel installation shown
Please review this entire manual prior to installation.
For more information about DreamLine ® Shower Doors, Tub Doors & Enclosures, please visit DreamLine.com
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 ©2018 DreamLine. All Rights Reserved
UNIDOOR - Style C w/inline panel for shelves
MODEL #s
SHDR-20357210CS-##
SHDR-20367210CS-##
SHDR-20377210S-##
SHDR-20387210S-##
SHDR-20397210S-##
SHDR-20407210S-##
SHDR-20417210S-##
SHDR-20427210S-##
SHDR-20417210CS-##
SHDR-20427210CS-##
SHDR-20437210S-##
SHDR-20447210S-##
SHDR-20457210S-##
SHDR-20467210S-##
SHDR-20477210S-##
SHDR-20487210S-##
SHDR-20477210CS-##
SHDR-20487210CS-##
SHDR-20497210S-##
SHDR-20507210S-##
SHDR-20517210S-##
SHDR-20527210S-##
SHDR-20537210S-##
SHDR-20547210S-##
SHDR-20537210CS-##
SHDR-20547210CS-##
SHDR-20557210S-##
SHDR-20567210S-##
SHDR-20577210S-##
SHDR-20587210S-##
SHDR-20597210S-##
SHDR-20607210S-##
Model #s
ELEGANCE - Style C w/inline panel for shelves
MODEL #s
SHDR-4137720-##
SHDR-4139720-##
SHDR-4140720-##
SHDR-4142720-##
SHDR-4144720-##
SHDR-4146720-##
SHDR-4147720-##
SHDR-4149720-##
SHDR-4151720-##
SHDR-4152720-##
SHDR-4154720-##
SHDR-4156720-##
SHDR-4158720-##
SHDR-4159720-##
## = Finish
01- Chrome
04- Brushed Nickel
06- Oil Rubbed Bronze
09- Satin Black
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 ©2018 DreamLine. All Rights Reserved
This model is treated with DreamLine’s exclusive ClearMax
TM
Glass technology.
This is a specially formulated coating that prevents the buildup of soap and water spots.
Install the surface with the ClearMax
TM
label towards the inside of the shower.
Please note that depending on the model, the glass may be coated on either one or both surfaces.
For best results, squeegee the glass after each use and dry with a soft cloth.
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 ©2018 DreamLine. All Rights Reserved
Table of Contents
Section title
Preparation
Tools
Detailed Diagram of Shower Panel Components
Parts Diagram and Parts List
Adjustable Wall Profile System
Installation Steps
Vinyl Seals
Glass Shelves
Product maintenance
Page #
2
3
4
9
13
15
5-6
6
7-14
INLINE PANEL - Style C shower panel manual Ver 1 01/2018
Preparation
1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with the packing slip. After opening all boxes and packages read this introduction carefully.
Check that all of the necessary parts are included in the package by checking off the components on the “Detailed Diagram of Shower Panel Components”. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date. Please note that DreamLine ® will not replace any damaged products or missing parts free of charge after 3 business days or if the product has been installed.
Contact DreamLine ® if you have any questions, and please provide an order number, job name or other proof of purchase to help identify the original order.
2. Please note that you should consult your local building codes with questions on installation compliance standards. Building and plumbing codes may vary by location, and DreamLine ® is not responsible for code compliance standards for your project and will not accept any returns.
3. If this unit is going to be installed in a new construction, please install all of the required plumbing and drainage before installing the shower. Use a competent and licensed (if required by local code) plumber for all plumbing installation
4. Make sure that prior to beginning the installation, the surfaces are leveled and solid and will be able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular installation surface level, radius corners or improper angle of side walls will result in serious problems for your installation. Note that some adjustments and drilling will be necessary during the installation process.
5. Protect all primary surfaces of the product during installation. Never set the glass down directly onto a tile floor. Leave corner protectors in place until necessary to remove them. Always use a piece of wood or cardboard to protect the bottom edge and corners of the glass prior to and during installation.
6. This unit must be installed upon a finished threshold and against finished walls.
7. This model requires that you drill into the threshold for proper installation.
8.
This model requires a minumum of 5/8” of flat threshold space for installation.
9.
Professional installation recommended.
!
NOTE: DO NOT attach the handle to the door glass or the towel bar to the panel glass until instructed.
DO NOT use the handle or towel bar to lift the glass during installation. This may result in damage to the glass and/or serious injury. Always use an assistant or a professional grade glass suction cup when handling heavy glass.
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 2
Level
Power
Drill
Tape
Measure
Tools
Pencil
Drill bit
(Ø5/16")
(8mm)
Phillips
Screwdriver Silicone
Soft Head
Hammer
Drill bit
(Ø1/8")
(3mm)
Mallet
Knife
Professional-grade
Glass suction cup
Top
Tip:
Measure the finished opening before proceeding with the installation to be sure that the correct model size has been ordered.
Threshold must be level
Tip:
Prior to installation, cover the shower/tub drain with tape to prevent losing screws or small parts.
Tip: Set screw gun clutch to low setting when installing screws and bolts to prevent stripping the heads.
!
Middle
Bottom
W
NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed diagram and packing list in this manual as a reference. Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing, please contact DreamLine your model configuration.
® for replacement. The shipping boxes may contain extra parts not used in
NOTE: Retain these installation instructions for future reference.
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 3
Detailed Diagram of Shower Panel Components
Diagram C
12 11 10 9
13
14
15
16
17
18
19
22
21
23
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 4
PART#
09
10
11
12
13
14
15
DESCRIPTION
Wall profile
Glass profile
Panel glass
Glass shelf
Wall Anchor
Pan head screw ST4.2x10
Truss head screw ST4.2x40
Parts List
Diagram C
QTY
1pc
1pc
1pc
2pcs
8pcs
3pcs
4pcs
PART#
16
17
DESCRIPTION
Pan head screw ST4.2x35
Decorative screw cover and washer
18
19
Bottom bracket
Anti-Water strip (inline)
21 Shelf bracket (with nut)
22 Shelf bracket (without nut)
23 Countersunk screw ST4.2x40
QTY
1pc
4pcs
1pc
1pc
2pcs
4pcs
4pcs
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 5
Adjustable Wall Profile System
Glass Profile
Wall Profile
1” max
!
The Glass Profiles can be adjusted within the Wall Profiles for overall width or to correct for out-of-plumb conditions within the model size.
Screw them together after making final adjustments.
1
Ø1/8"
2 3
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 decorative cap screw washer
6
Installation steps
!
The UNIDOOR or ELEGANCE shower door needs to be installed prior to proceeding with the following Panel Glass installation. Please see the Single
Shower Door installation manual included in the door packaging for complete shower door installation instructions. Before beginning the installation, recheck the finished opening size. Specific model size information can be found on DreamLine.com.
!
NOTE:
The left-swing Unidoor door installation is shown as an example throughout this manual. Use the same method for aligning the door and panel for the Elegance door and inline panel installation.
!
NOTE:
The Unidoor and Elegance hinges are factory set to overclose 8°. The following procedure is recommended to ensure proper alignment of the panel glass and door glass.
UNIDOOR door shown as an example
1.
Align the Door so that it is perpendicular to the wall and parallel with the outside of the threshold.
Mark a line on the threshold for reference. Open the door to allow space for the panel installation.
(Fig 1)
1 2 3
D
OOR
outside outside
Fig 1
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 7
2.
Apply clear silicone into the entire length of the channel in the Glass Profile (#10) and attach it to the edge of the Panel Glass (#11) . Make sure the Glass Profile (#10) is flush with the top and bottom of the
Panel Glass (#11).
Insert the Panel Glass (#11) with the attached Glass Profile (#10) into the Wall Profile (#09) . (Fig 2)
!
ATTENTION:
Please note that the bottom hole in the corner of the Panel Glass must be opposite from the Glass Profile.
!
NOTE:
If the Glass Profile fit is too tight over the
Panel Glass, use a rubber mallet and a piece of wood to gently tap on the glass profile. Never use a metal hammer or hit the profile without a wood bumper.
1 Glass Profile 2
3 flush
with
glas s
4
P ANEL
G LAS
S
Glass Profile
Wall Profile
P ANEL
G LAS
If necessary, use a rubber mallet to tap on the glass profile
Fig 2
P ANEL
G LAS
S
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 hole for bottom bracket
!
If possible, allow the silicone to cure before handling the assembled panel.
8
3.
Press the Anti-Water Strip (inline) (#19) onto the vertical edge of the Panel Glass (#11) . (This will protect the edge of the panel glass and allow for proper spacing with the door glass).
Attach the Bottom Bracket (#18) through the bottom hole of the Panel Glass (#11) . (Fig 3)
1 inside
2 inside
3 4 inside inside
Fig 3
4.
Carefully position the assembled panel onto the threshold and against the wall. Push the
Wall Profile (#09) tight to the wall while holding the panel tight to the threshold. (Fig 4)
!
Use Caution not to bang the glass onto the threshold. inside
INLINE PANEL - Style C shower panel manual Ver 1 01/2018
Fig 4
9
5.
Close the Door and align the Panel Glass (#11) with the
Door Glass. Use the reference mark on the threshold (from
Step #1 ) to confirm that the Door is perpendicular to the wall. If needed, adjust the position of the Panel Glass
(#11) so that the Anti-Water Strip (inline) (#19) makes contact with the Door Glass from top to bottom and creates a seal.
◾ Mark the wall along the inner edge of the Wall Profile
(#09) .
◾ Mark the drilling hole onto the threshold through the hole in the Bottom Bracket (#18) . (Fig. 5)
P
ANEL inside
!
The two-piece wall profile system (consisting of the glass profiles and wall profiles) will allow for overall width and/or out-of-plumb adjustment within the model size.
See page 6 for details.
P
ANEL
D
OOR inside
5
D
OOR
3
1 align the panel glass with the door glass
1/16"-1/8" panel glass Door
2 inside
4 inside
P
ANEL
Fig 5
inside
6.
Remove the Wall Profile (#09) from the Glass Profile (#10)/Panel Glass (#11) assembly.
Place the Wall Profile (#09) back onto the outlined position on the wall and mark the holes for drilling through the predrilled holes in the Wall Profile (#09) .
Drill the holes in the wall using a Ø5/16” drill bit and insert the Wall Anchors (#13) .
Apply silicone along the back of the Wall Profile (#09) and around the holes on the wall.
Fasten the Wall Profile (#09) to the wall with the Truss Head Screw ST4.2×40 (#15) . (Fig 6)
!
Use Caution not to pull the Glass Profile (#10) off of the Panel Glass (#11).
1 2 3 4 inside inside
5
Ø5/16"
(8mm)
INLINE PANEL - Style C shower panel manual Ver 1 01/2018
Fig 6
10
!
Double check the alignment and spacing of the panel glass with the door glass before drilling into the threshold for the bottom bracket.
7.
Drill a hole for the Bottom Bracket (#18) into the threshold at the mark that was made in step #5 .
** Use an Ø1/8” drill bit for installation into an acrylic base OR use a Ø5/16” drill bit and an anchor for installation into a tile threshold. Use the Pan Head Screw ST4.2x35 (#16) along with a raised white washer to attach the Bottom Bracket (#18) to the threshold and snap on the Decorative Screw
Cover (#17). (Fig 7a and Fig 7b)
1 outside
2 inside
3 4 5 outside
Ø1/8”or
Ø5/16” inside inside inside
Fig 7a
decorative cap screw washer
!
◾ For installation into an Acrylic Threshold :
drill a Ø1/8”(3mm) hole and use the Pan Head Screw
ST4.2x35 (#16)
OR
◾ For installation into a Tile Threshold :
drill a Ø5/16”(8mm) hole, install a Wall Anchor 5/16”
(#13) and use the Pan Head Screw ST4.2x35 (#16)
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 inside
Fig 7b
11
8.
Recheck the alignment and spacing of the Door Glass and Panel Glass (#11) and test the operation of the Door. After final adjustments of the Panel Glass (#11) drill holes into the Glass Profile (#10) through the predrilled holes in the Wall Profile (#09) using an Ø1/8” drill bit.
Use the Pan Head Screws ST4.2×10 (#14) and Washers (#17) to attach the Wall Profile (#09) to the
Glass Profile (#10) . Cover the exposed screw heads with Decorative Screw Cover (#17) . (Fig 8)
!
NOTE:
Only drill through the first layer of the Glass Profile.
1
Ø1/8"
2 screw washer decorative cap
Fig 8
3
9.
Apply a good quality mildew-resistant silicone along the connection of the Wall Profile to the wall and the
Panel Glass to the threshold. (Fig 9)
!
NOTE: The installation is not complete until the required glass support shelves are installed. Proceed to the next step.
inside
Fig 9
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 12
Glass Support Shelves Installation
UNIDOOR Style C ELEGANCE Style C
Right-Hand panel installation shown
10.
Mark the Glass Shelf (#12) position on the wall. According to the measurements in Fig. 10a1 , mark the drilling holes for the Shelf Brackets (without nut) (#22) .
Drill the holes using a Ø5/16” drill bit and insert the Wall Anchors (#13) . Attach the Shelf Brackets
(without nut) (#22) to the wall using the Countersunk Screw ST4.2×40 (#23) and attach the Shelf
Brackets (with nut) (#21) to the Panel Glass (#11) .
Insert the Glass Shelves (#12) into the Shelf Brackets (#21 & #22) and tighten the set screw at the bottom of each bracket.
(Fig 10a and Fig 10b)
1
6"
2"
2
Ø5/16"
3
4 5 6 inside
!
Fig 10a
Fig 10b
Do Not shelf the shelf during installation until all set screws are secured.
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 13
!
Allow 24 hours for the silicone to fully cure before using the shower. (Fig 11)
24
Hours
24
Hours
UNIDOOR Style C ELEGANCE Style C
Fig 11
Right-Hand panel installation shown
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 14
Product Maintenance
BASES and BACKWALLS:
To ensure long-lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Avoid the use of aerosol spray cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
GLASS:
To ensure long-lasting life for your glass shower products, wipe them off after each use with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent soap buildup and water spots (Hard water can etch the surface of the glass over time if left to dry). To prevent scratching the surface: never use abrasive cleaners or cleaning products that contain scouring agents. Never use bristle brushes or abrasive sponges that may scratch the surface.
HARDWARE:
To ensure a long-lasting finish, wipe off the metal parts after each use with a soft cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If accidentally used, rinse the surface as soon as possible to prevent damage to the finish (peeling or corrosion). After cleaning the polished finishes, rinse thoroughly and wipe dry with a soft cloth.
Clean stainless steel surfaces at least once a week. When applying stainless steel cleaner or polish to stainless steel hardware, work with (not across) the grain. Never use an abrasive sponge or cloth, steel wool or wired brush as these may permanently scratch the surfaces.
NOTE: To maximize the life of your door, it is important to regularly inspect the glass and all hardware for misalignment, proper attachment, and/or damage. Contact DreamLine
®
with any questions or concerns.
DreamLine
®
shower doors and enclosures are designed not to leak when installed properly and the flow of water is not pointed directly at the hinges or vinyl seals.
INLINE PANEL - Style C shower panel manual Ver 1 01/2018 15
TEL: 866-731-2244
FAX: 866-857-3638
DREAMLINE.COM
For more information on DreamLine ® Shower Doors and Enclosures please visit DreamLine.com
©2018 DreamLine. All Rights Reserved
advertisement
Related manuals
advertisement