ALFI BRAND AB9209-PC Single-Handle Shower Diverter Installation instructions

INSTALLATION MANUAL 3-WAY DIVERTER VALVE

*Installation method and usage for below items are the same.

AB9209

*COMPONENTS CHECKING

LIST OF THIS STANDARD COMPONENTS:

Please double-check the components list hereinafter and contact our company or our distributor for any unconformity.

Remarks: 1.Without affecting their performancing, components may be changed without further notice.

2.Drawings for reference only. Product size & shape refer to actual faucet.

*Installation Instructions

'k

Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving the factory.

'k

To avoid the faucet from jamming, do flush the water pipe before installation.

After installation, make sure every joint safely sealed & no leaking.

'k

The nominal water pressure is 0.05Mpa-1.0Mpa(including cold & hot water pressure), suitable for water temperature from:4 ° C-90 ° C.

-1-

The Component List

1. Main body

2. Cover plate

3. Adjustive cover

4. Handle

5. Screw

6. Decorative plug

7. Protective cover

8. Manual

Qty.

1

1

1

1

1

1

1

1

*

J X

Flush

*Dimension Drawing

*Installation Procedures

50

1 To head shower 2.

To valve t

Notice: Connect connector with arrows to the mixer correctly.

For wallcut space

1.Determine location of the valve according to the thickness of the wall ( refer to the dimensions above).

2.lnstall the main body(1) to the mounting area. Connect the pipes and shower/bath outlets.Then test the tightness and check for leaks.Testing conditions:

At opening position, to water test the outlet pipes and valve, water pressure �0.4MPa

-2-