1.
2.
INSTALLATION
INSTRUCTIONS
Quick & Easy Installation
No Tools or Cutting Needed
M
ADE
IN
USA
Start with clean, flowing gutters
Remove all leaves and debris from gutters and downspouts before installing GutterBrush.
Be sure gutters are properly pitched and flowing toward adequate number of downspouts.
Slide GutterBrush sections filling the existing gutter from end to end
Slide under gutter's hangers, brackets or spikes throughout entire gutter channel to ensure complete protection.
Give brush a 1/4 turn once in place and bent bristles will evenly spread around gutter brackets or spikes.
3.
4.
No Need to Cut GutterBrush
When a section of brush is longer than the remaining gutter section, simply bend or fold the brush back into itself to create the required length. It is also possible to overlap the ends of 2 sections.
Corners
When installing GutterBrush around corners simply bend the brush to fit the corresponding gutter shape or section.
That’s It !!!
5.
GutterBrush will eliminate or greatly reduce the need for regular gutter cleaning.
In extreme cases involving a heavy load of small debris, occasional maintenance may be required. Simply remove brush sections, shake out excess debris and reinsert brush.
“Dear Customer,
Home improvement experts and contractors praise the performance, ease of installation, low maintenance and economic value offered by GutterBrush and we hope you will feel the same.
Thank you for your purchase!”
Company founders
Bob & Randy Schreiber
