advertisement
Camera User Guide
●
Make sure you read this guide, including the “Safety Instructions”
( = 14) section, before using the camera.
● Reading this guide will help you learn to use the camera properly.
● Store this guide safely so that you can use it in the future.
ENGLISH
● Click the buttons in the lower right to access other pages.
: Next page
: Previous page
: Page before you clicked a link
● To jump to the beginning of a chapter, click the chapter title at right.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
© CANON INC. 2017 CT0-D143-A
1
Before Use
Initial Information
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera
Battery Pack
NB-13L*
Battery Charger
CB-2LH/CB-2LHE
Wrist Strap
* Do not peel off the adhesive covering from a battery pack.
● Printed matter is also included.
●
A memory card is not included ( = 2).
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of capacity.
● SD memory cards* 1
● SDHC memory cards * 1 * 2
● SDXC memory cards* 1 * 2
*1 Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.
*2 UHS-I memory cards are also supported.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
2
Preliminary Notes and Legal
Information
● Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable.
● The user’s unauthorized photographing or recording (video and/or sound) of people or copyrighted materials may invade the privacy of such people and/or may violate others’ legal rights, including copyright and other intellectual property rights, even when such photographing or recording is intended solely for personal use.
● The camera warranty is valid only in the area of purchase. In case of camera problems while abroad, return to the area of purchase before contacting a Canon Customer Support Help Desk.
● Although the screen (monitor) is produced under extremely highprecision manufacturing conditions and more than 99.99% of the pixels meet design specifications, in rare cases some pixels may be defective or may appear as red or black dots. This does not indicate camera damage or affect recorded images.
● When the camera is used over an extended period, it may become warm. This does not indicate damage.
Conventions in This Guide
● In this guide, icons are used to represent the corresponding camera buttons and dials on which they appear or which they resemble.
● The following camera buttons and controls are represented by icons.
Numbers in parentheses indicate the numbers of corresponding
controls in “Part Names” ( = 4).
[ ] Up button (12) on back
[ ] Left button (8) on back
[ ] Right button (13) on back
[ ] Down button (15) on back
[ ] Control dial (7) on back
● Shooting modes and on-screen icons and text are indicated in brackets.
● : Important information you should know
● : Notes and tips for expert camera use
● = xx: Pages with related information (in this example, “xx” represents a page number)
● Instructions in this guide apply to the camera under default settings.
● For convenience, all supported memory cards are simply referred to as the “memory card”.
● The symbols “ Still Images” and “ Movies” below titles indicate how the function is used—whether for still images or movies.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
3
(1)
(2)
(3)
Part Names
(4) (5) (6) (7) (8) (9) (10) (11)
(1) Microphone
(2) Lamp
(3) Lens
(4) Zoom lever
Shooting: [ (telephoto)] /
[ (wide angle)]
Playback: [ (magnify)] /
[ (index)]
(5) Movie button
* Used with NFC features ( = 115).
(12) (13) (14)
(6) Mode dial
(7) Shutter button
(8) Power button
(9) Flash
(10) (N-Mark)*
(11) [ (Flash pop up)] switch
(12) Tripod socket
(13) Memory card/battery cover
(14) Strap mount
(1) (2) (3) (4)
(6)
(7)
(8)
(9)
(10) (5)
(1) Screen (monitor)
(2) Speaker
(3) DIGITAL terminal
(4) HDMI TM terminal
(5) Serial number (Body number)
(6) [ (Framing Assist – Seek)] /
[ (Single-image erase)] button
(7) Control dial
(8) [ (Macro)] /
[ (Manual focus)] / Left button
(9) Indicator
(10) [ (Playback)] button
(11) [ (Wi-Fi)] button
(12) [ (Exposure compensation)] /
[ (Story Highlights)] / Up button
(13) [ (Flash)] / Right button
(14) FUNC. (Function) / SET button
(Information)] / Down (15) [ button
(16) [ ] button
● You can turn the control dial to perform most of the operations possible with the
[ ][ ][ ][ ] buttons, such as choosing items and switching images.
(11)
(12)
(13)
(15)
(16)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
4
Table of Contents
Before Use
Initial Information .............................................................. 2
Package Contents .................................................................... 2
Compatible Memory Cards....................................................... 2
Preliminary Notes and Legal Information ................................. 3
Conventions in This Guide ....................................................... 3
Part Names .............................................................................. 4
Common Camera Operations ................................................ 12
Safety Instructions .................................................................. 14
Basic Guide
Basic Operations............................................................. 17
Initial Preparations.................................................................. 17
Attaching the Strap ....................................................................17
Holding the Camera ...................................................................17
Charging the Battery Pack .........................................................18
Inserting the Battery Pack and Your Memory Card ...................18
Removing the Battery Pack and Memory Card .....................19
Setting the Date and Time .........................................................19
Changing the Date and Time .................................................20
Display Language ......................................................................21
Trying the Camera Out ........................................................... 21
Shooting (Smart Auto) ...............................................................21
Viewing ......................................................................................23
Erasing Images .....................................................................24
Advanced Guide
Camera Basics ................................................................ 25
On/Off ..................................................................................... 25
Power-Saving Features (Auto Power Down) .............................26
Power Saving in Shooting Mode ...........................................26
Power Saving in Playback Mode ...........................................26
Shutter Button ........................................................................ 26
Shooting Modes ..................................................................... 27
Shooting Display Options ....................................................... 27
Adjusting the Screen Angle .................................................... 28
Using the FUNC. Menu .......................................................... 28
Using the Menu Screen .......................................................... 29
On-Screen Keyboard.............................................................. 30
Indicator Display ..................................................................... 31
Clock ...................................................................................... 32
Auto Mode / Hybrid Auto Mode ...................................... 33
Shooting with Camera-Determined Settings .......................... 33
Shooting (Smart Auto) ...............................................................33
Shooting in Hybrid Auto Mode ...................................................35
Digest Movie Playback ..........................................................36
Still Images/Movies ...............................................................36
Still Images ............................................................................36
Movies ...................................................................................36
Scene Icons ...............................................................................37
Continuous Shooting Scenes ................................................38
Image Stabilization Icons ...........................................................38
On-Screen Frames ....................................................................39
Common, Convenient Features ............................................. 39
Zooming In Closer on Subjects (Digital Zoom) ..........................39
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
5
Easily Reacquiring Subjects after Manual Zooming
(Framing Assist – Seek) ............................................................40
Auto Zooming in Response to Subject Movement
(Auto Zoom) ...............................................................................40
Adjusting the Constant Face Display Size ............................41
Easily Reacquiring Subjects with Auto Zooming
(Seek Assist) ..............................................................................42
Adding a Date Stamp ................................................................42
Using the Self-Timer ..................................................................43
Using the Self-Timer to Avoid Camera Shake .......................44
Customizing the Self-Timer ...................................................44
Continuous Shooting .................................................................44
Image Display during Playback .............................................45
Using Face ID......................................................................... 45
Personal Information .................................................................45
Registering Face ID Information ................................................46
Shooting ....................................................................................47
Checking and Editing Registered Information ...........................47
Overwriting and Adding Face Information .............................48
Erasing Registered Information .............................................49
Image Customization Features .............................................. 50
Changing the Aspect Ratio ........................................................50
Changing the Number of Recording Pixels (Image Size) ..........50
Guidelines for Choosing Recording Pixel Setting
Based on Paper Size (for 4:3 Images) ..................................50
Correcting Greenish Image Areas from Mercury Lamps ...........51
Changing Movie Image Quality .................................................51
Helpful Shooting Features ...................................................... 52
Displaying Grid Lines .................................................................52
Deactivating Auto Level .............................................................52
Changing the IS Mode Settings .................................................53
Deactivating Image Stabilization ...........................................53
Customizing Camera Operation ............................................. 54
Preventing the AF-Assist Beam from Firing ...............................54
Preventing the Red-Eye Reduction Lamp from Lighting Up ......54
Changing the Image Display Style after Shots ..........................55
Changing the Image Display Period after Shots ...................55
Changing the Screen Displayed after Shots .........................55
Other Shooting Modes .................................................... 56
Applying Effects Automatically (Creative Shot) ...................... 56
Enjoying a Variety of Images from Each Shot ...........................56
Choosing Effects .......................................................................57
Recording Movies with a Variety of Effects................................57
Creative Shot Movie Playback ..............................................57
Shooting Yourself under Optimal Settings (Self Portrait)........ 58
Moving Subjects (Sports) ....................................................... 59
Specific Scenes ...................................................................... 59
Applying Special Effects ......................................................... 60
Shooting with a Skin Smoothing Effect (Smooth Skin) ..............61
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect) ............61
Shots Resembling Miniature Models (Miniature Effect) .............62
Playback Speed and Estimated Playback Time
(for One-Minute Clips) ...........................................................62
Shooting with a Toy Camera Effect (Toy Camera Effect) ...........63
Shooting with a Soft Focus Effect ..............................................63
Shooting in Monochrome ...........................................................64
Special Modes for Other Purposes ........................................ 64
Auto Shooting after Face Detection (Smart Shutter) .................64
Auto Shooting after Smile Detection (Smile) .........................64
Auto Shooting after Wink Detection (Wink Self-Timer) ..........65
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
6
Auto Shooting after Detecting New Person
(Face Self-Timer) ...................................................................66
Recording Various Movies ...................................................... 67
Recording Movies in Standard Mode ........................................67
Shooting Movies with Smoother Motion ................................67
Locking or Changing Image Brightness ................................67
Disabling Auto Slow Shutter ..................................................68
Correcting Severe Camera Shake ........................................68
Sound Settings ..........................................................................68
Deactivating the Wind Filter ..................................................68
Using the Attenuator ..............................................................68
Recording Movies in Short Clip Mode .......................................69
Playback Effects ....................................................................69
P Mode ............................................................................. 70
Shooting in Program AE ([P] Mode) ....................................... 70
Image Brightness (Exposure) ................................................. 71
Adjusting Image Brightness (Exposure Compensation) ............71
Locking Image Brightness / Exposure (AE Lock) ......................71
Changing the Metering Method .................................................71
Changing the ISO Speed ...........................................................72
Correcting Image Brightness (i-Contrast) ..................................72
Image Colors .......................................................................... 73
Capturing Natural Colors (White Balance) ................................73
Custom White Balance ..........................................................73
Changing Image Color Tones (My Colors) ................................74
Custom Color.........................................................................74
Shooting Range and Focusing ............................................... 75
Shooting Close-Ups (Macro) .....................................................75
Shooting in Manual Focus Mode ...............................................75
Easily Identifying the Focus Area (MF Peaking) ....................76
Digital Tele-Converter ................................................................77
Changing the AF Frame Mode ..................................................77
Center ....................................................................................77
Face AiAF ..............................................................................77
Choosing Subjects to Focus On (Tracking AF) .....................78
Shooting with Servo AF .........................................................79
Changing the Focus Setting ......................................................79
Shooting with the AF Lock .........................................................80
Shooting Continuously as the Camera Keeps the Subject in
Focus .........................................................................................80
Flash....................................................................................... 81
Changing the Flash Mode .........................................................81
Auto .......................................................................................81
On ..........................................................................................81
Slow Synchro ........................................................................81
Off ..........................................................................................81
Adjusting the Flash Exposure Compensation ............................82
Shooting with the FE Lock .........................................................82
Other Settings ........................................................................ 83
Changing the Compression Ratio (Image Quality) ....................83
Changing the IS Mode Settings .................................................83
Tv, Av, and M Mode ......................................................... 84
Specific Shutter Speeds ([Tv] Mode)...................................... 84
Specific Aperture Values ([Av] Mode) ..................................... 85
Specific Shutter Speeds and Aperture Values ([M] Mode) ..... 85
Adjusting the Flash Output ........................................................86
Playback Mode ................................................................ 87
Viewing ................................................................................... 87
Switching Display Modes ...........................................................88
Overexposure Warning (for Image Highlights) ......................89
Histogram ..............................................................................89
GPS Information Display .......................................................89
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
7
Viewing Short Movies Recorded in Creative Shot Mode
(Creative Shot Movies) ..............................................................89
Viewing Short Movies Created When Shooting Still Images
(Digest Movies) ..........................................................................90
Viewing by Date .....................................................................90
Checking People Detected in Face ID .......................................90
Browsing and Filtering Images ............................................... 91
Navigating through Images in an Index .....................................91
Finding Images Matching Specified Conditions .........................91
Viewing Individual Images in a Group .......................................92
Editing Face ID Information .................................................... 93
Changing Names .......................................................................93
Erasing Names ..........................................................................93
Image Viewing Options .......................................................... 94
Magnifying Images ....................................................................94
Viewing Slideshows ...................................................................94
Changing Slideshow Settings ................................................95
Auto Playback of Related Images (Smart Shuffle) ....................95
Protecting Images .................................................................. 96
Using the Menu .........................................................................96
Choosing Images Individually ....................................................96
Selecting a Range .....................................................................97
Protecting All Images at Once ...................................................97
Clearing All Protection at Once .............................................97
Erasing Images ...................................................................... 98
Erasing Multiple Images at Once ...............................................98
Choosing a Selection Method ...............................................98
Choosing Images Individually ................................................99
Selecting a Range .................................................................99
Specifying All Images at Once ...............................................99
Rotating Images ................................................................... 100
Using the Menu .......................................................................100
Deactivating Auto Rotation ......................................................100
Tagging Images as Favorites ............................................... 101
Using the Menu .......................................................................101
Editing Still Images ............................................................... 102
Resizing Images ......................................................................102
Cropping ..................................................................................102
Changing Image Color Tones (My Colors) ..............................103
Correcting Image Brightness (i-Contrast) ................................104
Correcting Red-Eye .................................................................104
Editing Movies ...................................................................... 105
Reducing File Sizes .................................................................106
Erasing Movie Chapters ..........................................................107
Viewing Albums (Story Highlights) ....................................... 108
Choosing Themes for Albums .............................................108
Adding Background Music to Albums ......................................109
Creating Your Own Albums ...................................................... 110
Combining Short Clips...........................................................111
Wireless Features ......................................................... 112
Available Wireless Features ..................................................112
Using Wi-Fi Features ............................................................... 112
Using Bluetooth ® Features ...................................................... 112
Sending Images to a Smartphone .........................................113
Transferring Images to a Bluetooth Enabled Smartphone ...... 113
Transferring Images to an NFC-Compatible Smartphone ....... 115
Connecting via NFC When Camera Is Off or in Shooting
Mode ................................................................................... 115
Connecting via NFC When Camera Is in Playback Mode ... 117
Adding a Smartphone Using the Wi-Fi Menu .......................... 117
Using Another Access Point .................................................... 119
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
8
Previous Access Points ...........................................................120
Saving Images to a Computer .............................................. 120
Preparing to Register a Computer ...........................................120
Installing CameraWindow ....................................................120
Configuring the Computer for a Wi-Fi Connection
(Windows Only) ...................................................................121
Saving Images to a Connected Computer ...............................122
Confirming Access Point Compatibility ................................122
Using WPS-Compatible Access Points ...............................122
Connecting to Listed Access Points ....................................124
Previous Access Points .......................................................125
Sending Images to a Registered Web Service ..................... 126
Registering Web Services .......................................................126
Registering CANON iMAGE GATEWAY ..............................126
Registering Other Web Services .........................................128
Uploading Images to Web Services ........................................128
Printing Images Wirelessly from a Connected Printer .......... 129
Sending Images to Another Camera .................................... 131
Image Sending Options ........................................................ 132
Sending Multiple Images .........................................................132
Selecting a Range ...............................................................133
Sending Favorite Images ....................................................133
Notes on Sending Images .......................................................133
Choosing the Number of Recording Pixels (Image Size) ........134
Adding Comments ...................................................................134
Sending Images Automatically (Image Sync) ....................... 134
Initial Preparations ...................................................................134
Preparing the Camera .........................................................134
Preparing the Computer ......................................................135
Sending Images .......................................................................135
Viewing Images Sent via Image Sync on a Smartphone.....136
Geotagging Images When You Shoot .....................................136
Controlling the Camera Remotely from a Smartphone ............138
Controlling the Camera via Wi-Fi ........................................138
Controlling the Camera via Bluetooth ..................................138
Editing or Erasing Wi-Fi Settings.......................................... 139
Editing Connection Information ...............................................139
Changing a Device Nickname .............................................140
Erasing Connection Information ..........................................140
Specifying Images Viewable from Smartphones .................140
Changing the Camera Nickname ............................................141
Returning the Wi-Fi Settings to Default ...................................141
Clearing Information of Devices Paired via Bluetooth .......... 142
Setting Menu .................................................................. 143
Adjusting Basic Camera Functions ...................................... 143
Silencing Camera Operations ..................................................143
Adjusting the Volume ...............................................................143
Hiding Hints and Tips ...............................................................144
Date and Time .........................................................................144
World Clock .............................................................................144
Lens Retraction Timing ............................................................145
Using Eco Mode ......................................................................145
Power-Saving Adjustment .......................................................145
Screen Brightness ...................................................................145
Hiding the Start-Up Screen ......................................................146
Formatting Memory Cards .......................................................146
Low-Level Formatting ..........................................................147
File Numbering ........................................................................147
Date-Based Image Storage .....................................................148
Metric / Non-Metric Display .....................................................148
Checking Certification Logos ...................................................148
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
9
Display Language ....................................................................148
Adjusting Other Settings ..........................................................149
Restoring Default Camera Settings .........................................149
Restoring All Camera Defaults ............................................149
Restoring Defaults for Individual Functions .........................149
Accessories ................................................................... 150
System Map ......................................................................... 150
Optional Accessories ............................................................ 151
Power Supplies ........................................................................151
Other Accessories ...................................................................152
Printers ....................................................................................152
Photo and Movie Storage ........................................................152
Using Optional Accessories.................................................. 152
Playback on a TV ....................................................................152
Playback on a High-Definition TV ........................................152
Inserting and Charging the Battery Pack.............................. 153
Using a Computer to Charge the Battery ............................155
Using the Software ............................................................... 155
Computer Connections via a Cable .........................................156
Checking Your Computer Environment ...............................156
Installing the Software .........................................................156
Saving Images to a Computer .................................................156
Printing Images .................................................................... 157
Easy Print ................................................................................157
Configuring Print Settings ........................................................158
Cropping Images before Printing .........................................159
Choosing Paper Size and Layout before Printing ...............159
Available Layout Options .....................................................160
Printing ID Photos ...............................................................160
Printing Movie Scenes .............................................................160
Movie Printing Options ........................................................160
Adding Images to the Print List (DPOF) ..................................161
Configuring Print Settings ....................................................161
Setting Up Printing for Individual Images ............................161
Setting Up Printing for a Range of Images ..........................162
Setting Up Printing for All Images ........................................162
Clearing All Images from the Print List ................................162
Printing Images Added to the Print List (DPOF) ..................162
Adding Images to a Photobook ...............................................163
Choosing a Selection Method .............................................163
Adding Images Individually ..................................................163
Adding All Images to a Photobook ......................................163
Removing All Images from a Photobook .............................163
Appendix ........................................................................ 164
Troubleshooting .................................................................... 164
On-Screen Messages........................................................... 168
On-Screen Information ......................................................... 170
Shooting (Information Display) ................................................170
Battery Level .......................................................................170
Playback (Detailed Information Display) ..................................171
Summary of Movie Control Panel ........................................171
Functions and Menu Tables ................................................. 172
Functions Available in Each Shooting Mode ...........................172
FUNC. Menu ............................................................................173
Shooting Tab ............................................................................175
Set Up Tab ...............................................................................179
Playback Tab ...........................................................................179
Print Tab ..................................................................................180
Playback Mode FUNC. Menu ..................................................180
Handling Precautions ........................................................... 180
Specifications ....................................................................... 181
Image Sensor ......................................................................181
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
10
Lens .....................................................................................181
Shutter .................................................................................181
Aperture ...............................................................................181
Flash ....................................................................................181
Monitor.................................................................................182
Shooting ..............................................................................182
Recording ............................................................................182
Power ..................................................................................183
Interface ..............................................................................183
Operating Environment .......................................................183
Dimensions (CIPA compliant) ..............................................183
Weight (CIPA compliant) ......................................................184
Battery Pack NB-13L ...........................................................184
Battery Charger CB-2LH/CB-2LHE .....................................184
Compact Power Adapter CA-DC30/CA-DC30E ..................184
Index..................................................................................... 185
Precautions for Wireless Features (Wi-Fi, Bluetooth, or
Others).................................................................................187
Radio Wave Interference Precautions .................................187
Security Precautions ...........................................................187
Third-Party Software ...........................................................188
Personal Information and Security Precautions ..................189
Trademarks and Licensing ..................................................189
Disclaimer ............................................................................189
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
11
Common Camera Operations
Shoot
● Use camera-determined settings (Auto Mode, Hybrid Auto Mode)
-
● See several effects applied to each shot, using camera-determined settings (Creative Shot Mode)
-
● Shoot yourself under optimal settings (Self Portrait)
-
Shooting people well
Portraits
(
Matching specific scenes
Sports
(
Night Scenes
Low Light
(
Fireworks
Applying special effects
Vivid Colors
(
Fish-Eye Effect
(
Poster Effect
Smooth Skin
(
Miniature Effect
Toy Camera Effect
(
Soft Focus
(
Monochrome
● Focus on faces
-
● Without using the flash (Flash Off)
-
● Include yourself in the shot (Self-Timer)
-
● Add a date stamp
-
● Movie clips and photos together (Movie Digest)
-
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
12
View
● View images (Playback Mode)
-
● Automatic playback (Slideshow)
-
● On a TV
-
● On a computer
-
● Browse through images quickly
-
● Erase images
-
● Create an album automatically
-
Record/View Movies
● Record movies
-
● View movies (Playback Mode)
-
● Print pictures
-
Save
● Save images to a computer
-
Use Wi-Fi Features
● Send images to a smartphone
-
● Share images online
-
● Send images to a computer
-
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
13
Safety Instructions
● Be sure to read these instructions in order to operate the product safely.
● Follow these instructions to prevent injury or harm to the operator of the product or others.
WARNING
Denotes the risk of serious injury or death.
● Keep the product out of the reach of young children.
A strap wrapped around a person’s neck may result in strangulation.
The accessory shoe cover is dangerous if swallowed. If swallowed, seek immediate medical assistance.
● Use only power sources specified in this instruction manual for use with the product.
● Do not disassemble or modify the product.
● Do not expose the product to strong shocks or vibration.
● Do not touch any exposed internal parts.
● Stop using the product in any case of unusual circumstances such as the presence of smoke or a strange smell.
● Do not use organic solvents such as alcohol, benzine or paint thinner to clean the product.
● Do not get the product wet. Do not insert foreign objects or liquids into the product.
● Do not insert foreign objects or liquids into the product.
● Do not use the product where flammable gases may be present.
This may cause electric shock, explosion or fire.
● For products featuring a viewfinder, do not look through the viewfinder at strong light sources such as the sun on a bright day or lasers and other strong artificial light sources.
This may harm your vision.
● Observe the following instructions when using commercially available batteries or provided battery packs.
Use batteries/battery packs only with their specified product.
Do not heat batteries/battery packs or expose them to fire.
Do not charge batteries/battery packs using non-authorized battery chargers.
Do not expose the terminals to dirt or let them come into contact with metallic pins or other metal objects.
Do not use leaking batteries/battery packs.
When disposing of batteries/battery packs, insulate the terminals with tape or other means.
This may cause electric shock, explosion or fire.
If a battery/battery pack leaks and the material contacts your skin or clothing, flush the exposed area thoroughly with running water. In case of eye contact, flush thoroughly with copious amounts of clean running water and seek immediate medical assistance.
● Observe the following instructions when using a battery charger.
● Observe the following instructions when using a battery charger or AC adapter.
Periodically remove any dust buildup from the power plug and power outlet using a dry cloth.
Do not plug in or unplug the product with wet hands.
Do not use the product if the power plug is not fully inserted into the power outlet.
Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other metal objects.
Do not touch the battery charger or AC adapter connected to a power outlet during lightning storms.
Do not place heavy objects on the power cord. Do not damage, break or modify the power cord.
Do not wrap the product in cloth or other materials when in use or shortly after use when the product is still warm in temperature.
Do not leave the product connected to a power source for long periods of time.
This may cause electric shock, explosion or fire.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
14
● Do not allow the product to maintain contact with the same area of skin for extended periods of time during use.
This may result in low-temperature contact burns, including skin redness and blistering, even if the product does not feel hot. The use of a tripod or similar equipment is recommended when using the product in hot places and for people with circulation problems or less sensitive skin.
● Follow any indications to turn off the product in places where its use is forbidden.
Not doing so may cause other equipment to malfunction due to the effect of electromagnetic waves and even result in accidents.
CAUTION
Denotes the risk of injury.
● Do not fire the flash near the eyes.
It may hurt the eyes.
● Strap is intended for use on the body only. Hanging the strap with any product attached on a hook or other object may damage the product.
Also, do not shake the product or expose the product to strong impacts.
● Do not apply strong pressure on the lens or allow an object to hit it.
This may cause injury or damage to the product.
● Flash emits high temperatures when fired. Keep fingers, any other part of your body, and objects away from the flash unit while taking pictures.
This may cause burns or malfunction of the flash.
● Do not leave the product in places exposed to extremely high or low temperatures.
The product may become extremely hot/cold and cause burns or injury when touched.
Caution
Denotes the possibility of property damage.
● Do not aim the camera at intense light sources, such as the sun on a clear day or an intense artificial light source.
Doing so may damage the image sensor or other internal components.
● When using the camera on a sandy beach or at a windy location, be careful not to allow dust or sand to enter the camera.
● Wipe off any dust, grime, or other foreign matter on the flash with a cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the product to malfunction.
● Remove and store the battery pack/batteries when you are not using the product.
Any battery leakage that occurs may cause product damage.
● Before you discard the battery pack/batteries, cover the terminals with tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
● Unplug any battery charger used with the product when not in use. Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting in fire.
● Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion, resulting in product damage or fire.
● If your product uses multiple batteries, do not use batteries that have different levels of charge together, and do not use old and new batteries together. Do not insert the batteries with the + and – terminals reversed.
This may cause the product to malfunction.
● Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
15
● When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. Also close the screen (so that it faces the body), if your product’s screen closes.
● Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
16
Basic Guide
Basic Operations
Basic information and instructions, from initial preparations to shooting and playback
Initial Preparations
Prepare for shooting as follows.
Attaching the Strap
(2)
(1)
● Thread the end of the strap through the strap mount (1), and then pull the other end of the strap through the loop on the threaded end (2).
Holding the Camera
● Place the strap around your wrist.
● When shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. If you have raised the flash, do not rest your fingers on it.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
17
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to charge the battery pack initially, because the camera is not sold with the battery pack charged.
(1)
(2)
1
Insert the battery pack.
● After aligning the marks on the battery pack and charger, insert the battery pack by pushing it in (1) and down (2).
(1)
(2)
(1)
CB-2LH
CB-2LHE
(2)
2
Charge the battery pack.
● CB-2LH: Flip out the plug (1) and plug the charger into a power outlet (2).
● CB-2LHE: Plug the power cord into the charger, then plug the other end into a power outlet.
● The charging lamp turns orange, and charging begins.
● When charging is finished, the lamp turns green.
3
Remove the battery pack.
● After unplugging the battery charger, remove the battery pack by pushing it in
(1) and up (2).
● To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours.
● For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product.
● For details on charging time and the number of shots and recording time possible with a fully charged battery pack, see
“Power” ( = 183) and “Battery Charger CB-2LH/CB-2LHE”
● Charged battery packs gradually lose their charge, even when they are not used. Charge the battery pack on (or immediately before) the day of use.
● The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
Inserting the Battery Pack and Your Memory Card
Insert the included battery pack and a memory card (sold separately).
Note that before using a memory card that is new or has been formatted in another device, you should format the memory card with this camera
1
Open the cover.
(1) ● Slide the switch (1) and open the cover
(2).
(2)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
18
(2)
(2)
(1)
(1)
(2)
2
Insert the battery pack.
● Holding the battery pack with the terminals in the position shown, hold the battery lock toward (1) and insert the battery pack toward (2) until the lock clicks shut.
● If you insert the battery pack facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery pack is facing the right way and locks when inserted.
3
Check your card’s write-protect switch and insert the memory card.
● Recording is not possible on memory cards with a write-protect switch when the switch is in the locked position. Move the switch toward (1).
● Insert the memory card with the label (2) facing as shown until it clicks into place.
● Make sure the memory card is facing the right way when you insert it. Inserting memory cards facing the wrong way may damage the camera.
4
Close the cover.
● Lower the cover (1) and hold it down as you slide the switch, until it clicks into the closed position (2).
(1)
● For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Recording” ( = 182).
Removing the Battery Pack and Memory Card
Remove the battery pack.
● Open the cover and press the battery lock in the direction of the arrow.
● The battery pack will pop up.
Remove the memory card.
● Push the memory card in until it clicks, and then slowly release it.
● The memory card will pop up.
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date.
1
Turn the camera on.
● Press the power button.
● The [Date/Time] screen is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
19
2
Set the date and time.
● Press the [ ][ ] buttons to choose an item.
● Press the [ ][ ] buttons or turn the [ ] dial to specify the date and time.
● When finished, press the [ ] button.
3
Specify your home time zone.
● Press the [ ][ ] buttons to choose your home time zone.
4
Finish the setup process.
● Press the [ ] button when finished.
After a confirmation message, the setting screen is no longer displayed.
● To turn off the camera, press the power button.
● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
● To set daylight saving time (1 hour ahead), choose [ ] in step 2 and then choose [ ] by pressing the [ ][ ] buttons or turning the [ ] dial.
Changing the Date and Time
Adjust the date and time as follows.
1
Access the menu screen.
● Press the [ ] button.
2
Choose [Date/Time].
● Move the zoom lever to choose the [ ] tab.
● Press the [ ][ ] buttons or turn the
[ ] dial to choose [Date/Time], and then press the [ ] button.
3
Change the date and time.
● Follow step 2 in “Setting the Date and
Time” (
● Press the [ menu screen.
] button to close the
● Date/time settings can be retained for about 3 weeks by the camera’s built-in date/time battery (backup battery) after the battery pack is removed.
● The date/time battery will be charged in about 4 hours once you insert a charged battery pack, even if the camera is left off.
● Once the date/time battery is depleted, the [Date/Time] screen will be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” ( = 19).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
20
Display Language
Change the display language as needed.
1
Enter Playback mode.
● Press the [ ] button.
2
Access the setting screen.
● Press and hold the [ ] button, and then immediately press the [ ] button.
3
Set the display language.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose a language, and then press the [ ] button.
● Once the display language has been set, the setting screen is no longer displayed.
● The current time is displayed if you wait too long in step 2 after pressing the [ ] button before you press the [ ] button.
In this case, press the [ ] button to dismiss the time display and repeat step 2.
● You can also change the display language by pressing the
[ ] button and choosing [Language ] on the [ ] tab.
Trying the Camera Out
Still Images Movies
Try out the camera by turning it on, shooting some still images or movies, and viewing them.
Shooting (Smart Auto)
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
1
Turn the camera on.
● Press the power button.
● The startup screen is displayed.
2
Enter [ ] mode.
● Set the mode dial to [ ].
● Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
● Icons representing the scene and image stabilization mode are displayed in the upper left of the screen.
● Frames displayed around any detected subjects indicate that they are in focus.
3
Compose the shot.
● To zoom in and enlarge the subject, move the zoom lever toward [ ] (telephoto), and to zoom away from the subject, move it toward [ ] (wide angle).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
21
4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and frames are displayed to indicate image areas in focus.
● If [Raise the flash] is displayed, move the [ ] switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera.
2) Shoot.
● Press the shutter button all the way down.
● As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically.
● Keep the camera still until the shutter sound ends.
● After displaying your shot, the camera will revert to the shooting screen.
(1)
Recording Movies
1) Start recording.
● Press the movie button. The camera beeps once as recording begins, and
[ Rec] is displayed with the elapsed time (1).
● Black bars are displayed on the top and bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded.
● Frames displayed around any detected faces indicate that they are in focus.
● Once recording begins, take your finger off the movie button.
2) Finish recording.
● Press the movie button again to stop recording. The camera beeps twice as recording stops.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
22
Viewing
After shooting images or movies, you can view them on the screen as follows.
1
Enter Playback mode.
● Press the [ ] button.
● Your last shot is displayed.
2
Choose images.
● To view the previous image, press the [ ] button or turn the [ ] dial counterclockwise. To view the next image, press the [ ] button or turn the
[ ] dial clockwise.
● Press and hold the [ ][ ] buttons to browse through images quickly.
● To access this screen (Scroll Display mode), turn the [ ] dial rapidly. In this mode, turn the [ ] dial to browse through images.
● To return to single-image display, press the [ ] button.
● Movies are identified by a [
To play movies, go to step 3.
] icon.
3
Play movies.
● Press the [ ] button, choose [ ] (either press the [ ][ ] buttons or turn the
[ ] dial), and then press the [ ] button again.
● Playback now begins, and after the movie is finished, [ ] is displayed.
● To adjust the volume, press the [ ][ ] buttons during playback.
● To switch to Shooting mode from Playback mode, press the shutter button halfway.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
23
Erasing Images
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered.
1
Choose an image to erase.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image.
2
Erase the image.
● Press the [ ] button.
● After [Erase?] is displayed, press the
[ ][ ] buttons or turn the [ ] dial to choose [Erase], and then press the [ ] button.
● The current image is now erased.
● To cancel erasure, press the [ ][ ] buttons or turn the [ ] dial to choose
[Cancel], and then press the [ ] button.
●
You can choose multiple images to erase at once ( = 98).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
24
Advanced Guide
Camera Basics
Other basic operations and more ways to enjoy your camera, including shooting and playback options
On/Off
Shooting Mode
● Press the power button to turn the camera on and prepare for shooting.
● To turn the camera off, press the power button again.
Playback Mode
● Press the [ ] button to turn the camera on and view your shots.
● To turn the camera off, press the [ ] button again.
● To switch to Playback mode from Shooting mode, press the [ button.
● To switch to Shooting mode from Playback mode, press the shutter button halfway (
]
● The lens will be retracted after about one minute once the camera is in Playback mode. You can turn the camera off when the lens is retracted by pressing the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
25
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of inactivity. In about two more minutes, the lens is retracted and the camera turns itself off. To activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of inactivity.
● You can deactivate Auto Power Down and adjust the timing of
Display Off, if you prefer ( = 145).
● Power saving is not active while the camera is connected to other devices via Wi-Fi (
= 112), or when connected to a computer
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot.
In this guide, shutter button operations are described as pressing the button halfway or all the way down .
1
Press halfway. (Press lightly to focus.)
● Press the shutter button halfway. The camera beeps twice, and frames are displayed around image areas in focus.
2
Press all the way down. (From the halfway position, press fully to shoot.)
● The camera shoots, as a shutter sound is played.
● Keep the camera still until the shutter sound ends.
● Images may be out of focus if you shoot without initially pressing the shutter button halfway.
● Length of shutter sound playback varies depending on the time required for the shot. It may take longer in some shooting scenes, and images will be blurry if you move the camera (or the subject moves) before the shutter sound ends.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
26
Shooting Modes
Use the mode dial to access each shooting mode.
(7)
(1)
(2)
(3)
(4)
(1) Auto Mode / Hybrid Auto Mode
Fully automatic shooting, with camera-determined settings
(2) Creative Shot Mode
See several effects applied to each shot automatically (
(3) Self Portrait Mode
Shoot yourself under optimal settings (
(4) Sports Mode
Shoot continuously as the camera focuses on moving subjects
(6)
(5)
(5) Special Scene Mode
Shoot with settings designed for specific scenes, or add a variety of
(6) Movie Mode
For shooting movies (
You can also shoot movies when the mode dial is not set to Movie mode, simply by pressing the movie button.
(7) P, Tv, Av, and M Modes
Take a variety of shots using
your preferred settings ( = 70,
Shooting Display Options
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information is displayed
No information is displayed
● Screen brightness is automatically increased by the night view function when you are shooting under low light, making it easier to check how shots are composed. However, on-screen image brightness may not match the brightness of your shots. Note that any on-screen image distortion or jerky subject motion will not affect recorded images.
●
For playback display options, see “Switching Display Modes”
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
27
Adjusting the Screen Angle
You can adjust the screen angle and orientation to suit the scene or how you are shooting.
● The screen can be opened to about 180°.
● When including yourself in shots, you can view a mirror image of yourself by rotating the screen around toward the front of the camera.
● When the camera is not in use, keep the screen closed.
● Do not force the screen open too far, which may damage the camera.
●
To cancel reverse display, choose MENU ( = 29) > [
] tab >
[Reverse Display] > [Off].
Using the FUNC. Menu
Configure commonly used shooting functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
1
Access the FUNC. menu.
● Press the [ ] button.
(1)(2)
2
Choose a menu item.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a menu item (1), and then press the [ ] or [ ] button.
● Available options (2) are listed next to menu items, on the right.
● Depending on the menu item, functions can be specified simply by pressing the
[ ] or [ ] button, or another screen is displayed for configuring the function.
3
Choose an option.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an option.
● Items labeled with a [ ] icon can be configured by pressing the [ ] button.
● To return to the menu items, press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
28
4
Confirm your choice and exit.
● Press the [ ] button.
● The screen before you pressed the
[ ] button in step 1 is displayed again, showing the option you configured.
● To undo any accidental setting changes, you can restore the camera’s default settings (
Using the Menu Screen
Configure a variety of camera functions through the menu screen as follows. Menu items are grouped by purpose on tabs, such as shooting
[ ], playback [ ], and so on. Note that available menu items vary
depending on the selected shooting or playback mode ( = 175 –
1
Access the menu screen.
● Press the [ ] button.
2
Choose a tab.
● Move the zoom lever to choose a tab.
● After you have pressed the [ ][ ] buttons or turned the [ ] dial to choose a tab initially, you can switch between tabs by pressing the [ ][ ] buttons.
3
Choose a menu item.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a menu item.
● For menu items with options not shown, first press the [ ] or [ ] button to switch screens, and then either press the [ ][ ] buttons or turn the [ ] dial to select the menu item.
● To return to the previous screen, press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
29
4
Choose an option.
● Press the [ ][ ] buttons to choose an option.
5
Confirm your choice and exit.
● Press the [ ] button to return to the screen displayed before you pressed the
[ ] button in step 1.
● To undo any accidental setting changes, you can restore the camera’s default settings (
On-Screen Keyboard
Use the on-screen keyboard to enter information for Face ID (
Wi-Fi connections ( = 122), and so on. Note that the length and type of
information you can enter varies depending on the function you are using.
(1)
Entering Characters
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose a key labeled with a character, and then press the [ ] button repeatedly to enter the character you want.
● The amount of information you can enter
(1) varies depending on the function you are using.
Moving the Cursor
● Choose [ ] or [ ] and press the [ ] button.
Entering Line Breaks
● Choose [ ] and press the [ ] button.
Switching Input Modes
● To switch to other kinds of characters
(such as numbers or symbols) on this screen, choose [ ] and press the [ ] button.
● To enter uppercase letters, choose [ ] and press the [ ] button.
● Available input modes vary depending on the function you are using.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
30
Deleting Characters
● Choose [ ] and press the [ ] button.
The previous character will be deleted.
● Choosing [ ] and holding down the
[ ] button will delete five characters at a time.
Returning to the Previous Screen
● Press the [ ] button.
Indicator Display
The indicator on the back of the camera (
depending on the camera status.
Color
Indicator
Status
Camera Status
Green
Orange
Blinking
On
Starting up, recording/reading/transmitting
images, shooting long exposures ( = 84,
= 85), connected to a computer
( = 156), connecting/transmitting via Wi-Fi,
Charging via a compact power adapter
● When the indicator blinks green, do not turn the camera off, open the memory card/battery cover, or shake or hit the camera, which may corrupt images or damage the camera or memory card.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
31
Clock
You can check the current time.
● Press and hold the [ ] button.
● The current time appears.
● If you hold the camera vertically while using the clock function, it will switch to vertical display. Press the [ ][ ] buttons or turn the [ ] dial to change the display color.
● Press the [ ] button again to cancel the clock display.
● When the camera is off, press and hold the [ ] button, then press the power button to display the clock.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
32
Auto Mode / Hybrid Auto Mode
Convenient mode for easy shots with greater control over shooting
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions.
Shooting (Smart Auto)
Still Images
1
Turn the camera on.
● Press the power button.
● The startup screen is displayed.
Movies
2
Enter [ ] mode.
● Set the mode dial to [ ].
● Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
● Icons representing the scene and image stabilization mode are displayed in
the upper left of the screen ( = 37,
● Frames displayed around any detected subjects indicate that they are in focus.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
33
(1)
(2)
3
Compose the shot.
● To zoom in and enlarge the subject, move the zoom lever toward [ ] (telephoto), and to zoom away from the subject, move it toward [ ] (wide angle). (A zoom bar (1) showing the zoom position is displayed, along with the range of focus
(2).)
● To zoom in or out quickly, move the zoom lever all the way toward [ ] (telephoto) or [ ] (wide angle), and to zoom in or out slowly, move it just a little in the desired direction.
4
Shoot.
Shooting Still Images
1) Focus.
● Press the shutter button halfway. The camera beeps twice after focusing, and frames are displayed to indicate image areas in focus.
● Several frames are displayed when multiple areas are in focus.
● If [Raise the flash] is displayed, move the [ ] switch to raise the flash. It will fire when shooting. If you prefer not to use the flash, push it down with your finger, into the camera.
(1)
2) Shoot.
● Press the shutter button all the way down.
● As the camera shoots, a shutter sound is played, and in low-light conditions when you have raised the flash, it fires automatically.
● Keep the camera still until the shutter sound ends.
● After displaying your shot, the camera will revert to the shooting screen.
Recording Movies
1) Start recording.
● Press the movie button. The camera beeps once as recording begins, and
[ Rec] is displayed with the elapsed time (1).
● Black bars are displayed on the top and bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded.
● Frames displayed around any detected faces indicate that they are in focus.
● Once recording begins, take your finger off the movie button.
2) Resize the subject and recompose the shot as needed.
● To resize the subject, repeat the operations in step 3.
However, note that the sound of camera operations will be recorded. Note that movies shot at zoom factors shown in blue will look grainy.
● When you recompose shots, the focus, brightness, and colors will be automatically adjusted.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
34
3) Finish recording.
● Press the movie button again to stop recording. The camera beeps twice as recording stops.
● Recording will stop automatically when the memory card becomes full.
● The flash firing during shots indicates that the camera has automatically attempted to ensure optimal colors in the main subject and background (Multi-area White Balance).
Shooting in Hybrid Auto Mode
Still Images Movies
You can make a short movie of the day just by shooting still images. The camera records 2 – 4-second clips of scenes before each shot, which are later combined in a digest movie.
Clips recorded in this mode may be included in Story Highlights albums
1
Enter [ ] mode.
● Follow step 2 in “Shooting (Smart Auto)”
(
].
2
Compose the shot.
● Follow steps 3 – 4 in “Shooting (Smart
Auto)” (
focus.
● For more impressive digest movies, aim the camera at subjects about four seconds before shooting still images.
3
Shoot.
● Follow step 4 in “Shooting (Smart Auto)”
( = 33) to shoot a still image.
● The camera records both a still image and movie clip. The clip, which ends with the still image and a shutter sound, forms a single chapter in the digest movie.
● Battery life is shorter in this mode than in [ digest movies are recorded for each shot.
] mode, because
● A digest movie may not be recorded if you shoot a still image immediately after turning the camera on, choosing [ ] mode, or operating the camera in other ways.
● Sounds and vibrations from operating the camera will be recorded in digest movies.
● Digest movie quality is [ ] and cannot be changed.
● Sounds are not played when you press the shutter button halfway
or trigger the self-timer ( = 143).
● Digest movies are saved as separate movie files in the following cases even if they were recorded on the same day in [ ] mode.
The digest movie file size reaches approximately 4 GB, or the total recording time reaches approximately 16 minutes and 40 seconds.
-
The digest movie is protected ( = 96).
Daylight saving time (
are changed.
-
A new folder is created ( = 148).
● Recorded shutter sounds cannot be modified or erased.
● If you prefer to record digest movies without still images, adjust the setting in advance. Choose MENU (
] tab >
[Digest Type] > [No Stills].
● Individual chapters can be edited (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
35
Digest Movie Playback
Display a still image shot in [ ] mode to play the digest movie created on the same day, or specify the date of the digest movie to play (
Still Images/Movies
● If the camera makes no operating sounds, it may have been turned on while holding down the [ ] button. To activate sounds, press the [ ] button, choose [Mute] on the [ ] tab, and then press the [ ][ ] buttons to choose [Disable].
Still Images
● A blinking [ ] icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still.
● If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Flash” ( = 181).
● The subject may be too close if the camera only beeps once when you press the shutter button halfway. For details on the
range of focus (shooting range), see “Lens” ( = 181).
● To reduce red-eye and to assist in focusing, the lamp may be lit when shooting in low-light conditions.
● A blinking [ ] icon displayed when you attempt to shoot indicates that shooting is not possible until the flash has finished recharging. Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again.
● The shutter sound will not be played when the Sleeping and
Babies (Sleeping) icons ( = 37) are displayed.
● Although you can shoot again before the shooting screen is displayed, your previous shot may determine the focus, brightness, and colors used.
● You can change how long images are displayed after shots
(
Movies
● Keep your fingers away from the microphone (1) while recording movies. Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled.
(1)
● Avoid touching camera controls other than the movie button when recording movies, because sounds made by the camera will be recorded.
● Once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before
● Audio is recorded in stereo.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
36
Scene Icons
Still Images Movies
In [ ] and [ ] modes, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color.
Depending on the scene, continuous images may be shot (
Background
Subject
Normal Backlit Dark* 1 Sunsets Spotlights
People
Moving People
Shadows on Face
Smiling
Sleeping
Babies
Smiling Babies
Sleeping Babies
Moving Children
Other Subjects
Other Moving Subjects
Other Close-Range
Subjects
*
*
*
*
2
* 3
* 2
* 3
* 2
* 3
* 3
2
* 3
* 2
3
2
–
*
*
*
3
* 3
* 3
* 3
* 3
* 3
* 3
* 3
* 3
3
3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
*1 Tripod used.
*2 The background color of icons is light blue when the background is a blue sky, dark blue when the background is dark, and gray for all other backgrounds.
*3 The background color of icons is light blue when the background is a blue sky, and gray for all other backgrounds.
● The background color of [ ], [ ], [ ], [ ], and [ ] is dark blue, and the background color of [ ] is orange.
● For movies, only People, Other Subjects, and Other Close-Range
Subjects icons are displayed.
● In [ ] mode, icons are only displayed for People, Shadows on Face,
Other Subjects, and Other Close-Range Subjects.
● For self-timer shots, icons are not displayed for the following subjects: moving, smiling, or sleeping people; smiling or sleeping babies; moving children; and other moving subjects.
● Icons are not displayed for smiling or sleeping subjects and moving children in drive modes other than [ ] (
[Hg Lamp Corr.] is set to [On] and scenes are automatically corrected
(
● Backlit icons are not displayed for moving children and smiling people when the flash is set to [ ].
● Icons for babies (including smiling and sleeping babies) and moving children are displayed when [Face ID] is set to [On] and faces of registered babies (less than two years old) or children (2 – 12 years
old) are detected ( = 46). Confirm beforehand that the date and time
● Try shooting in [ ] mode (
= 70) if the scene icon does not
match actual shooting conditions, or if it is not possible to shoot with your expected effect, color, or brightness.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
37
Continuous Shooting Scenes
If the icon for one of the following scenes (in table’s left column) is displayed when you shoot a still image, the camera shoots continuously. If the icon for one of the following scenes (in table’s left column) is displayed when you press the shutter button halfway, one of the icons [ ], [ ], or
[ ] is displayed to inform you that the camera shoots continuously.
Smiling
(including Babies)
Consecutive images are captured, and the camera analyzes details such as facial expressions to save the image determined to be the best.
Sleeping
(including Babies)
Beautiful shots of sleeping faces, created by combining consecutive shots to reduce camera shake and image noise.
The AF-assist beam and the flash will not fire, and the shutter sound will not be played.
Children
So you don’t miss a photo opportunity of children who move around, the camera will capture three consecutive images for each shot.
● In some scenes, expected images may not be saved, and images may not look as expected.
● Focus, image brightness, and color are determined by the first shot.
● When you want to shoot single images only, press the [ ] button, choose [ ] in the menu, and then select [ ].
Image Stabilization Icons
Still Images Movies
Optimal image stabilization for the shooting conditions (Intelligent IS) is automatically applied, and the following icons are displayed.
Image stabilization for still images (Normal)
Image stabilization for still images when panning (Panning)*
Image stabilization for angular camera shake and shift-shake in macro shots (Hybrid IS). For movies, [ ] is displayed and [ ] image stabilization is also applied.
Image stabilization for movies, reducing strong camera shake, as when recording while walking (Dynamic)
Image stabilization for slow camera shake, such as when recording movies at telephoto (Powered)
No image stabilization, because the camera is mounted on a tripod or held still by other means. However, during movie recording, [ ] is displayed, and image stabilization to counteract wind or other sources of vibration is used (Tripod IS).
* Displayed when you pan, following moving subjects with the camera. When you follow subjects moving horizontally, image stabilization only counteracts vertical camera shake, and horizontal stabilization stops. Similarly, when you follow subjects moving vertically, image stabilization only counteracts horizontal camera shake.
●
To cancel image stabilization, set [IS Mode] to [Off] ( = 83). In
this case, an IS icon is not displayed.
● [ ] is not available in [ ] mode.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
38
On-Screen Frames
Still Images Movies
In [ ] mode, a variety of frames are displayed once the camera detects subjects you are aiming the camera at.
● A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus. However, if the camera detects subject movement, only the white frame will remain on the screen.
● When you are pressing the shutter button halfway and the camera detects subject movement, a blue frame is displayed, and the focus and image brightness are constantly adjusted (Servo AF).
● Try shooting in [ ] mode (
= 70) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are displayed on the background or similar areas.
Common, Convenient Features
Zooming In Closer on Subjects (Digital Zoom)
Still Images Movies
When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 160x enlargement.
1
Move the zoom lever toward [ ].
● Hold the lever until zooming stops.
(1)
● Zooming stops at the largest zoom factor before the image becomes noticeably grainy, which is then indicated on the screen.
2
Move the zoom lever toward [ ] again.
● The camera zooms in even closer on the subject.
● (1) is the current zoom factor.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
● Moving the zoom lever will display the zoom bar (which indicates the zoom position). The zoom bar is color-coded to indicate the zoom range.
White range: optical zoom range where the image will not appear grainy.
Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus).
Blue range: digital zoom range where the image will appear grainy.
● Because the blue range will not be available at some recording pixel settings (
= 50), the maximum zoom factor can be
achieved by following step 1.
39
●
To deactivate digital zoom, choose MENU ( = 29) > [
] tab >
[Digital Zoom] > [Off].
Easily Reacquiring Subjects after Manual
Zooming (Framing Assist – Seek)
Still Images Movies
If you lose track of a subject while zoomed in, you can find it more easily by temporarily zooming out.
1
Look for the lost subject.
● Press and hold the [ ] button.
● The camera zooms out and displays a white frame around the area shown before you pressed the [ ] button.
2
Reacquire the subject.
● Aim the camera so that the subject enters the white frame, and then release the
[ ] button.
● The previous magnification is now restored, so that the area within the white frame fills the screen again.
● Some shooting information is not displayed while the camera is zoomed out.
● During movie shooting, the white frame is not displayed if you press the [ ] button. Also note that a changed zoom factor and camera operating sounds are recorded.
● If you prefer to shoot at the zoom factor of the screen in step 1, press the shutter button all the way down.
● You can adjust the zoom factor that the camera reverts to when you release the [ ] button by moving the zoom lever to resize the white frame while you hold the [ ] button.
● To adjust the area displayed when the [ ] button is pressed, access MENU (
] tab > [ Display Area], and choose one of the three options.
● The zoom factor cannot be changed with the [ ] button after you press the shutter button all the way down in self-timer mode
(
Auto Zooming in Response to Subject Movement
(Auto Zoom)
Still Images Movies
The camera automatically zooms in and out to keep a detected face
( = 77) at a constant size. If the person moves closer, the camera
automatically zooms out, and vice versa. This size can also be adjusted, as needed.
1
Enter [ ] Auto mode.
● Press and release the [ ] button quickly.
● [ ] is displayed.
● A white frame is displayed around the detected face, and the camera zooms in and out to keep the subject on the screen.
● When multiple faces are detected, a white frame is displayed around the main subject’s face and up to two gray frames around other faces, as the camera zooms to keep these subjects on the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
40
2
Shoot.
● Auto zooming continues even after you shoot, and the frames are still displayed.
● To cancel auto zooming, press the [ ] button again. [ Auto: Off] is displayed.
● A face may not be displayed at a constant size relative to the screen at some zoom factors, or if the person’s head is tilted or facing the camera indirectly.
● During movie recording, a changed zoom factor and camera operating sounds are recorded.
● When Auto is on, some shooting information is not displayed, and some shooting settings cannot be configured.
● Auto zooming to keep multiple subjects on the screen is not performed during movie recording, even if faces are detected.
● Auto zooming is not performed during continuous shooting.
● If multiple faces are detected in step 1, you can switch the main face used for auto zooming by pressing the [ ] button.
● When a detected subject moves toward the edge of the screen, the camera zooms out to keep the subject on the screen.
● The zoom factor cannot be changed after you press the shutter
button all the way down in self-timer mode ( = 43).
● The camera prioritizes zooming to keep subjects on the screen.
For this reason, it may not be possible to maintain a constant face display size, depending on subject movement and shooting conditions.
● When no face is detected, the camera zooms to a certain level and stops zooming until a face is detected.
Adjusting the Constant Face Display Size
● When Auto is on, press the [ ][ ] buttons to choose the desired option.
● The camera zooms automatically to keep faces at the specified size.
Auto
Face
Upper Body
Whole Body
Manual
Auto zoom to prevent subjects from moving off the screen.
When multiple faces are detected, the camera zooms to keep these subjects on the screen.
Keep faces large enough to show facial expressions clearly.
Keep faces small enough to show the person’s upper body.
Keep faces small enough to show the person’s entire body.
Keep faces at the size specified by moving the zoom lever. Release the zoom lever once the desired size has been obtained.
●
The face size can also be adjusted in MENU ( = 29) > [
] tab > [ Auto Settings] > [ Auto Zoom]. You can choose [Off] to deactivate this feature and use only the feature described in
“Easily Reacquiring Subjects with Auto Zooming (Seek Assist)”
● You can zoom in or out with the zoom lever when [Face], [Upper
Body], or [Whole Body] is selected, but the original zoom factor will be restored in a few seconds after you release the lever.
● You can clear your specified face size during movie recording by pressing the [ ] button.
● Face sizes cannot be changed during movie recording.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
41
Easily Reacquiring Subjects with Auto Zooming
(Seek Assist)
Still Images Movies
If you lose track of a subject while zoomed in and move the camera to look for it, the camera detects this movement and automatically zooms out, which makes it easier to find the subject.
1
Enter [ ] Auto mode (
40).
2
Look for the lost subject.
● When you move the camera to look for the subject, the camera zooms out to help you find it.
3
Reacquire the subject.
● Once you find the subject and stop moving the camera, the camera zooms in again.
● The camera does not zoom out automatically while [ ] is displayed around a detected face, even if you move the camera.
●
When the feature described in “Auto Zooming in Response to
Subject Movement (Auto Zoom)” ( = 40) is deactivated, [ ] is
displayed around a detected face, and the camera automatically zooms out when moved.
● Zooming is not possible while the shutter button is pressed halfway.
● To deactivate this feature and use only the feature described in
“Auto Zooming in Response to Subject Movement (Auto Zoom)”
] tab > [ Auto
Settings] > [Seek Assist] > [Off].
Adding a Date Stamp
Still Images Movies
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct ( = 19).
1
Configure the setting.
● Press the [ ] button, choose [Date
Stamp ] on the [ ] tab, and then press the [ ][ ] buttons to choose [Date &
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
4
Shoot.
● To cancel this mode, press the [ ] button again. [ Auto: Off] is displayed.
42
2
Shoot.
● As you take shots, the camera adds the shooting date or time to the lower-right corner of images.
● To restore the original setting, choose
[Off] in step 1.
● Date stamps cannot be edited or removed.
● Shots taken without adding a date stamp can be printed with one as follows.
However, adding a date stamp this way to images that already have one may cause it to be printed twice.
Print using printer functions (
Use camera DPOF print settings (
Use the software downloaded from the Canon website
(
Using the Self-Timer
Still Images Movies
With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button.
1
Configure the setting.
● Press the [ ] button, choose [ ] in the menu, and then choose [ ].
● Once the setting is complete, [ ] is displayed.
2
Shoot.
● For Still Images: Press the shutter button halfway to focus on the subject, and then press it all the way down.
● For Movies: Press the movie button.
● Once you start the self-timer, the lamp will blink and the camera will play a selftimer sound.
● Two seconds before the shot, the blinking and sound will speed up. (The lamp will remain lit in case the flash fires.)
● To cancel shooting after you have triggered the self-timer, press the
[ ] button.
● To restore the original setting, choose [ ] in step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
43
Using the Self-Timer to Avoid Camera Shake
Still Images Movies
This option delays shutter release until about two seconds after you have pressed the shutter button. If the camera is unsteady while you are pressing the shutter button, it will not affect your shot.
● Follow step 1 in “Using the Self-Timer”
(
● Once the setting is complete, [ ] is displayed.
● Follow step 2 in “Using the Self-Timer”
(
Customizing the Self-Timer
Still Images Movies
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
Choose [ ].
● Following step 1 in “Using the Self-Timer”
(
= 43), choose [ ] and press the
[ ] button.
2
Configure the setting.
● Press the [ ][ ] buttons to choose the delay time or number of shots.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a value, and then press the
[ ] button.
● Once the setting is complete, [ ] is displayed.
● Follow step 2 in “Using the Self-Timer”
(
● For movies recorded using the self-timer, recording begins after your specified delay time, but specifying the number of shots has no effect.
● When you specify multiple shots, image brightness and color tone are determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full.
● When a delay longer than two seconds is specified, two seconds before the shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain lit in case the flash fires.)
Continuous Shooting
Still Images Movies
In [ ] mode, hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Shooting” ( = 182).
1
Configure the setting.
● Press the [ ] button, choose [ ] in the menu, and then choose [ ] (
● Once the setting is complete, [ ] is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
2
Shoot.
● Hold the shutter button all the way down to shoot continuously.
44
● During continuous shooting, the focus, exposure, and colors are locked at the position/level determined when you pressed the shutter button halfway.
● Cannot be used with the self-timer (
● Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
● As more shots are taken, shooting may slow down.
● Shooting may slow down if the flash fires.
● Multi-area White Balance (
= 33) is not available. Similarly, [Hg
Lamp Corr.] (
= 51) is set to [Off] and cannot be changed.
Image Display during Playback
Each set of images shot continuously is managed as a single group, and only the first image in that group will be displayed. To indicate that the image is part of a group, [ screen.
] is displayed in the upper left of the
● If you erase a grouped image (
= 98), all images in the group
are also erased. Be careful when erasing images.
●
Grouped images can be played back individually ( = 92) and
ungrouped (
● Protecting (
= 96) a grouped image will protect all images in
the group.
● Grouped images can be viewed individually when played back using Image Search (
case, images are temporarily ungrouped.
● The following actions are not available for grouped images: editing Face ID information (
tagging as favorites (
( = 157), setting up individual image printing (
adding to a photobook (
= 163). To do these things, either
view grouped images individually (
Using Face ID
If you register a person ahead of time, the camera will detect that person’s face, and prioritize focus, brightness, and color for that person when shooting. In [ ] mode, the camera can detect babies and children based on registered birthdays and optimize settings for them when shooting.
This function is also useful when searching for a specific registered
person among a large number of images ( = 91).
Registering people in advance also makes it easier to add them when creating Story Highlights albums (
Personal Information
● Information such as images of a face (face info) registered with
Face ID, and personal information (name, birthday) will be saved on the camera. Additionally, when registered people are detected, their names will be recorded in still images. When using the Face ID function, be careful when sharing the camera or images with others, and when posting images online where many others can view them.
● When disposing of a camera or transferring it to another person after using Face ID, be sure to erase all information (registered faces, names, and birthdays) from the camera (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
45
Registering Face ID Information
You can register information (face info, names, and birthdays) for up to 12 people to use with Face ID.
1
Access the setting screen.
● Press the [ ] button, choose [Face
ID Settings] on the [ ] tab, and then press the [ ] button (
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add to Registry], and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add a New Face], and then press the [ ] button.
2
Register face information.
● Aim the camera so that the face of the person you want to register is inside the gray frame at the center of the screen.
● A white frame on the person’s face indicates that the face is recognized.
Make sure a white frame is displayed on the face, and then shoot.
● If the face is not recognized, you cannot register face information.
● After [Register?] is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
● The [Edit Profile] screen is displayed.
3
Register the person’s name and birthday.
● Press the [ ] button to access the keyboard, and then enter the name
● To register a birthday, on the [Edit Profile] screen, choose [Birthday] (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● Press the [ ][ ] buttons to choose an option.
● Press the [ ][ ] buttons or turn the [ ] dial to specify the date.
● When finished, press the [ ] button.
4
Save the settings.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Save], and then press the
[ ] button.
● After a message is displayed, press the
[ ][ ] buttons or turn the [ ] dial to choose [Yes], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
46
5
Continue registering face information.
● To register up to 4 more points of face information (expressions or angles), repeat step 2.
● Registered faces are more easily recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
● The flash will not fire when following step 2.
● If you do not register a birthday in step 3, Babies or Children icons
( = 37) will not be displayed in [
] mode.
● You can overwrite registered face info, and add face info later if you have not filled all 5 face info slots (
Shooting
If you register a person ahead of time, the camera will prioritize that person as the main subject, and optimize focus, brightness, and color for that person when shooting.
● When you point the camera toward people, the names of up to 3 registered people will be displayed when they are detected.
● Shoot.
● Displayed names will be recorded in still images. The names of detected people
(maximum total of 5) will be recorded, even if the names are not displayed.
● People other than those registered may be mistakenly detected as the registered person if they share similar facial features.
● Registered people may not be correctly detected if the captured image or scene differs drastically from the registered face information.
● If a registered face is not detected, or not easily detected, overwrite registered information with new face info. Registering face info right before shooting will allow for easier detection of registered faces.
● If a person is mistakenly detected as another person and you continue shooting, you can edit or erase the name recorded in the image during playback (
● Because faces of babies and children change quickly as they
grow, you should update their face info regularly ( = 46).
● If you don’t want names to be recorded in still images, choose
[Face ID Settings] on the [ ] tab, choose [Face ID], and then choose [Off].
● You can check names recorded in images in the playback screen
(simple information display) (
● In [ ] mode, names are not displayed on the shooting screen, but they will be recorded in still images.
●
Names recorded in continuous shooting ( = 44,
continue to be recorded in the same position as the first shot, even if subjects move.
Checking and Editing Registered Information
1
Access the [Check/Edit Info] screen.
● Following step 1 in “Registering Face ID
Information” ( = 46), choose [Check/
Edit Info] and press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
47
2
Choose a person to check or edit their information.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose the person whose information you want to check or edit, and then press the [ ] button.
3
Check or edit the information as needed.
● To check a name or birthday, choose [Edit
Profile] (either press the [ ][ ] buttons or turn the [ ] dial), and then press the
[ ] button. On the screen displayed, you can edit the name or birthday as described in step 3 of “Registering Face
● To check face information, choose [Face
Info List] (either press the [ ][ ] buttons or turn the [ ] dial), and then press the
[ ] button. To erase face information, press the [ ] button on the screen displayed, choose face information to erase by pressing the [ ][ ][ ][ ] buttons or turning the [ ] dial, and then press the [ ] button. After [Erase?] is displayed, choose [OK] (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● Even if you change names in [Edit Profile], the names recorded in previously shot images will remain the same.
Overwriting and Adding Face Information
You can overwrite existing face information with new face info. You should update face information regularly, especially with babies and children, as their faces change quickly as they grow.
You can also add face information when all 5 face info slots have not been filled.
1
Access the [Add Face Info] screen.
● Following step 1 in “Registering Face ID
Information” ( = 46), choose [Add Face
Info] and press the [ ] button.
2
Choose a person to overwrite their face info.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose the name of the person whose face info you want to overwrite, and then press the [ ] button.
● If five items of face info have already been registered, a message will be displayed. Choose [OK] (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● If less than five items of face info are registered, go to step 4 to add face information.
3
Choose the face info to overwrite.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose the face info to overwrite, and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
48
4
Register face information.
● Follow step 2 in “Registering Face ID
Information” ( = 46) to shoot, and then
register the new face information.
● Registered faces are more easily recognized if you add a variety of face information. In addition to a head-on angle, add a slight side angle, a shot when smiling, and shots inside and outside.
● You cannot add face information if all 5 information slots are filled.
Follow the steps above to overwrite face information.
● You can follow the above steps to register new face info when there is at least one slot open; however, you cannot overwrite any face information. Instead of overwriting face info, first erase unwanted existing info (
= 47), and then register new face
information ( = 46) as needed.
Erasing Registered Information
You can erase information (face info, names, and birthdays) registered to
Face ID. However, names recorded in previously shot images will not be erased.
1
Access the [Erase Info] screen.
● Follow step 1 in “Registering Face ID
Information” ( = 46) and choose [Erase
Info].
2
Choose a person to erase their information.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose the name of the person to erase, and then press the [ ] button.
● After [Erase?] is displayed, press the
[ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
● If you erase a registered person’s info, you will not be able to
display their name ( = 90), overwrite their info (
search for images that include them (
●
You can also erase names in image information ( = 93).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
49
Image Customization Features
Changing the Aspect Ratio
Still Images
Change the image aspect ratio (ratio of width to height) as follows.
Movies
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
(
● Once the setting is complete, the screen aspect ratio will be updated.
● To restore the original setting, repeat this process but choose [ ].
Used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35mm film, used for printing images at 5 x
7-inch or postcard sizes.
Native aspect ratio of the camera screen. Used for display on standard-definition televisions or similar display devices. Also used for printing images at 3.5 x 5-inch or A-series sizes.
Square aspect ratio.
● Not available in [ ] mode.
Changing the Number of Recording Pixels (Image
Size)
Still Images Movies
Choose the image’s number of recording pixels from 4 levels, as follows.
For guidelines on how many shots at each recording pixel setting can fit
on a memory card, see “Recording” ( = 182).
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
● The option you configured is now displayed.
● To restore the original setting, repeat this process but choose [ ].
Guidelines for Choosing Recording Pixel Setting
Based on Paper Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
3.5 x 5 in., 5 x 7 in., Postcard
For e-mailing and similar purposes
● Not available in [ ] mode.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
50
Correcting Greenish Image Areas from Mercury
Lamps
Still Images Movies
In [ ] mode, subjects or background in shots of evening scenes illuminated by mercury lamps may appear to have a greenish tinge. This greenish tinge can be corrected automatically when shooting, using Multiarea White Balance.
● Press the [ ] button, choose [Hg
Lamp Corr.] on the [ ] tab, and then choose [On] (
● Once the setting is complete, [ ] is displayed.
● To restore the original setting, repeat this process but choose [Off].
● After you are finished shooting under mercury lamps, you should set [Hg Lamp Corr.] back to [Off]. Otherwise, green hues not caused by mercury lamps may be corrected by mistake.
● Try taking some test shots first to make sure you obtain the desired results.
● In continuous shooting (
= 44), this setting is set to [Off] and
cannot be changed.
Changing Movie Image Quality
Still Images Movies
Three image quality settings are available. For guidelines on the total recording time for movies at each level of image quality that will fit on a
memory card, see “Recording” ( = 182).
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
● The option you configured is now displayed.
● To restore the original setting, repeat this process but choose [ ].
Image
Quality
Number of
Recording Pixels Frame Rate
1920 x 1080 30 fps
Details
For shooting in Full HD.
1280 x 720
640 x 480
30 fps
30 fps
For shooting in HD.
For shooting in standard definition.
● In [ ] and [ ] modes, black bars displayed on the top and bottom edges of the screen indicate image areas not recorded.
● In [ ] mode, [
(
] is also available, offering smoother motion
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
51
Helpful Shooting Features
Displaying Grid Lines
Still Images Movies
Grid lines can be displayed on the screen for vertical and horizontal reference while shooting.
● Press the [ ] button, choose [Grid
Lines] on the [ ] tab, and then choose
● Once the setting is complete, grid lines are displayed on the screen.
● To restore the original setting, repeat this process but choose [Off].
● Grid lines are not recorded in your shots.
Deactivating Auto Level
Still Images
Auto leveling keeps movies straight. To cancel this feature, choose
Movies
[Disable].
● Press the [ ] button, choose
[ Auto level] on the [ ] tab, and then
● Once recording begins, the display area narrows, and subjects are enlarged (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
52
Changing the IS Mode Settings
Still Images Movies
Deactivating Image Stabilization
When the camera is held still (as when shooting from a tripod), you should set image stabilization to [Off] to deactivate it.
1
Access the setting screen.
● Press the [ ] button, choose [IS
Settings] on the [ ] tab, and then press the [ ] button (
2
Configure the setting.
● Press the [ ][ ] buttons or turn the
[ ] dial to choose [IS Mode], and then choose [Off] by pressing the [ ][ ] buttons.
Off Deactivates image stabilization.
Recording Movies with Subjects at the Same Size
Shown before Shooting
Still Images Movies
Normally, once movie recording begins, the image display area changes and subjects are enlarged to allow for image straightening and correction of significant camera shake.
To record movies with subjects at the same size shown before shooting, you can reduce image stabilization and cancel Auto level.
● Set [ Auto level] to [Disable] as
described in “Deactivating Auto Level”
●
Follow step 1 in “Deactivating Image
Stabilization” ( = 53) to access the [IS
Settings] screen.
● Choose [Dynamic IS], and then choose
● You can also set [IS Mode] to [Off], so that subjects are recorded at the same size shown before shooting.
● [Dynamic IS] is not available when [IS Mode] is set to [Off]
(
● Only [Standard] is available when the movie quality is set to
[ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
53
Customizing Camera Operation
Customize shooting functions on the [ ] tab of the menu screen as follows.
For instructions on menu functions, see “Using the Menu Screen”
Preventing the AF-Assist Beam from Firing
Still Images Movies
You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions.
● Press the [ ] button, choose [AFassist Beam] on the [ ] tab, and then
● To restore the original setting, repeat this process but choose [On].
Preventing the Red-Eye Reduction Lamp from
Lighting Up
Still Images Movies
You can deactivate the red-eye reduction lamp that lights up to reduce red-eye when the flash is used in low-light shots.
1
Access the [Flash settings] screen.
● Press the [ ] button, choose [Flash settings] on the [ ] tab, and then press
2
Configure the setting.
●
● To restore the original setting, repeat this process but choose [On].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
54
Changing the Image Display Style after Shots
Still Images Movies
You can change how long images are displayed and what information is displayed immediately after shooting.
Changing the Image Display Period after Shots
1
Access the [Review image after shooting] screen.
● Press the [ ] button, choose
[Review image after shooting] on the
[ ] tab, and then press the [ ] button
(
2
Configure the setting.
● Choose [Display Time] and press the
[ ][ ] buttons to choose the desired option.
● To restore the original setting, repeat this process but choose [Quick].
Changing the Screen Displayed after Shots
Change the way images are displayed after shots as follows.
1
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (
55).
2
Configure the setting.
● Press the [ ][ ] buttons or turn the
[ ] dial to choose [Display Info]. Press the [ ][ ] buttons to choose the desired option.
● To restore the original setting, repeat this process but choose [Off].
Off
Detailed
Displays only the image.
Displays shooting details (
● When [Display Time] (
= 55) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
● By pressing the [ ] button while an image is displayed after shooting, you can switch the display information. Note that the settings of [Display Info] are not changed. You can also erase
images by pressing the [ ] button, or protect ( = 96) or tag
images as favorites ( = 101) by pressing the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
Quick
2 sec.,
4 sec.,
8 sec.
Hold
Off
Displays images only until you can shoot again.
Displays images for the specified time. Even while the shot is displayed, you can take another shot by pressing the shutter button halfway again.
Displays images until you press the shutter button halfway.
No image display after shots.
55
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions
Applying Effects Automatically
(Creative Shot)
Still Images Movies
Enjoying a Variety of Images from Each Shot
The camera determines the subject and shooting conditions, automatically applying special effects and recomposing the shot to emphasize the subject. Six still images are recorded for each shot. You can capture multiple still images with effects using camera-determined settings.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Shoot.
● Press the shutter button all the way down. As you shoot, the shutter sound is played three times.
● After the six images are displayed in succession, they are displayed simultaneously for about two seconds.
● To keep the images displayed until you press the shutter button halfway, press the [ ] button. You can choose an image for full-screen display by pressing the
[ ][ ][ ][ ] buttons or turning the [ ] dial, and then press the [ ] button.
● To return to the original display, press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
56
● Shooting will take some time when the flash fires, but hold the camera steady until the shutter sound is played three times.
●
The six images are managed together as a group ( = 92).
● Simultaneous display of the six images as shown in step 2 is only available immediately after you shoot.
Choosing Effects
You can choose effects for images captured in [ ] mode.
● After choosing [ ] mode, press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose the effect, and then press the [ ] button.
Auto
Retro
Monochrome
Special
Natural
All effects
Images resemble old photos
Images are generated in one color
Bold, distinctive-looking images
Subdued, natural-looking images
Recording Movies with a Variety of Effects
Let the camera determine subjects and shooting conditions when you record movies, and filters and effects such as playback in slow or fast motion will be added automatically. Once you have recorded a few movies, up to four are automatically combined to create a Creative Shot movie of 15 – 25 seconds. Note that sound is not recorded in this mode.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Record the first movie.
● Press the movie button. Recording begins, and a bar is displayed to indicate the elapsed time.
● Recording stops automatically in 3 – 6 seconds.
3
Record the second to fourth movies.
● Repeat step 2 three times to record four movies.
● Even if you do not record four movies that day, a Creative Shot movie will be saved as a separate file once the date changes.
● Effects are generally applied consistently to movies 1 – 4, but you can also change the effect in each movie (
● Individual chapters can be edited (
Creative Shot Movie Playback
You can choose and play back Creative Shot movies recorded in [ ] mode (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
57
Shooting Yourself under Optimal
Settings (Self Portrait)
Still Images Movies
For self-portraits, customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Configure the setting.
● Press the [ ] button to access the setting screen for smooth skin and brightness.
Press the [ ][ ] buttons to choose a setting item, and then press the [ ][ ] buttons or turn the [ ] dial to adjust the value as you watch the screen.
● Background defocus can also be disabled. After you choose [ ] in step 1, press the [ ] button.
3
Open the screen.
● Open the screen as shown.
Smooth skin effect
Brightness
Background
Defocus
4
Shoot.
● Hold the camera steady as you shoot.
When you press the shutter button all the way down with background defocus set to [Auto], the camera shoots twice and processes the images.
Choose from three levels of skin smoothing. Skin smoothing is optimized for the main subject’s face.
Choose from five levels of brightness.
Defocus the background.
● Areas other than people’s skin may be modified, depending on the shooting conditions.
● Try taking some test shots first to make sure you obtain the desired results.
● In [ ] flash mode, background defocusing is set to [Off] and cannot be changed.
● The time left before shooting is shown on the top of the screen when you activate the self-timer by selecting [ ], or by selecting
[ ] and setting the time to 3 seconds or more.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
58
Moving Subjects (Sports)
Still Images
Shoot continuously as the camera focuses on moving subjects.
1
Enter [ ] mode.
● Set the mode dial to [ ].
Movies
2
Focus.
● While you are pressing the shutter button halfway, the camera will continue to adjust focus and image brightness where the blue frame is displayed.
3
Shoot.
● Hold the shutter button all the way down to shoot continuously.
● In [ ] mode, shots may look grainy because the ISO speed
( = 72) is increased to suit the shooting conditions.
●
For details on the shooting range in [ ] mode, see “Lens”
● There may be a delay after continuous shooting before you can shoot again. Note that some types of memory cards may delay your next shot even longer.
● Shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
● Continuous shooting is not available in [
Specific Scenes
Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Choose a shooting mode.
● Press the [ ] button, choose [ ] in the menu, and then choose a shooting mode
3
Shoot.
Shooting Portraits (Portrait)
Still Images Movies
● Take shots of people with a softening effect.
Shooting Evening Scenes without
Using a Tripod (Handheld Night
Scene)
Still Images Movies
● Beautiful shots of evening scenes or portraits with evening scenery in the background, without the need to hold the camera very still (as with a tripod).
● A single image is created by combining consecutive shots, reducing camera shake and image noise.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
59
Shooting under Low Light (Low
Light)
Still Images Movies
● Shoot with minimal camera and subject shake even in low-light conditions.
Shooting Fireworks (Fireworks)
Still Images Movies
● Vivid shots of fireworks.
● Subjects appear larger in [ ] mode compared to other modes.
● In [ ] mode, shots may look grainy because the ISO speed
( = 72) is increased to suit the shooting conditions.
● Because the camera will shoot continuously in [ ] mode, hold it steady while shooting.
● In [ ] mode, excessive motion blur or certain shooting conditions may prevent you from obtaining the desired results.
● In [ ] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (
● When you use a tripod for evening scenes, shooting in [
mode instead of [ ] mode will give better results ( = 33).
● [ ] mode recording pixel setting is [ ] (2592 x 1944) and
] cannot be changed.
● In [ ] mode, although no frames are displayed when you press the shutter button halfway, optimal focus is still determined.
Applying Special Effects
Add a variety of effects to images when shooting.
1
Choose a shooting mode.
● Follow steps 1 – 2 in “Specific Scenes”
( = 59) to choose a shooting mode.
2
Shoot.
Shooting in Vivid Colors (Super
Vivid)
Still Images Movies
● Shots in rich, vivid colors.
Posterized Shots (Poster Effect)
Still Images Movies
● Shots that resemble an old poster or illustration.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
● In [ ] and [ ] modes, try taking some test shots first, to make sure you obtain the desired results.
60
Shooting with a Skin Smoothing Effect (Smooth
Skin)
Still Images Movies
Processes images to make skin look smoother.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
(
2
Choose an effect level.
● Press the [ ] button, choose an effect level (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● A preview is shown of how your shot will look with the effect applied.
3
Shoot.
● Areas other than people’s skin may be modified, depending on the shooting conditions.
● Try taking some test shots first to make sure you obtain the desired results.
Shooting with a Fish-Eye Lens Effect (Fish-Eye
Effect)
Still Images Movies
Shoot with the distorting effect of a fish-eye lens.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
2
Choose an effect level.
● Press the [ ] button, choose an effect level (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● A preview is shown of how your shot will look with the effect applied.
3
Shoot.
● Try taking some test shots first to make sure you obtain the desired results.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
61
Shots Resembling Miniature Models (Miniature
Effect)
Still Images Movies
Creates the effect of a miniature model, by blurring image areas above and below your selected area.
You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
(
● A white frame is displayed, indicating the image area that will not be blurred.
2
Choose the area to keep in focus.
● Press the [ ] button.
● Move the zoom lever to resize the frame, and press the [ ][ ] buttons to move it.
3
For movies, choose the movie playback speed.
● Press the [ ] button, and then choose the speed by pressing the [ ][ ] buttons or turning the [ ] dial.
4
Return to the shooting screen and shoot.
● Press the [ ] button to return to the shooting screen, and then shoot.
Playback Speed and Estimated Playback Time (for
One-Minute Clips)
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
Movies are played back at 30 fps.
● The zoom is not available when shooting movies. Be sure to set the zoom before shooting.
● Try taking some test shots first to make sure you obtain the desired results.
● To switch the orientation of the frame (from horizontal to vertical or vice-versa), press the [ ][ ] buttons in step 2. You can move the frame in vertical orientation by pressing the [ ][ ] buttons.
● Holding the camera vertically will change the orientation of the
● frame.
Movie image quality is [ an aspect ratio of [ be changed.
] at an aspect ratio of [ ] and [ ] at
] ( = 50). These quality settings cannot
● The zoom factor cannot be changed with the [ ] button on the screens in steps 2 and 3, or while shooting movies.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
62
Shooting with a Toy Camera Effect (Toy Camera
Effect)
Still Images Movies
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
(
].
2
Choose a color tone.
● Press the [ ] button, choose a color tone
(either press the [ ][ ] buttons or turn the
[ ] dial), and then press the [ ] button.
● A preview is shown of how your shot will look with the effect applied.
3
Shoot.
Standard
Warm
Cool
Shots resemble toy camera images.
Images have a warmer tone than with [Standard].
Images have a cooler tone than with [Standard].
● Try taking some test shots first to make sure you obtain the desired results.
Shooting with a Soft Focus Effect
Still Images Movies
This function allows you to shoot images as if a soft focus filter were attached to the camera. You can adjust the effect level as desired.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
2
Choose an effect level.
● Press the [ ] button, choose an effect level (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● A preview is shown of how your shot will look with the effect applied.
3
Shoot.
● Try taking some test shots first to make sure you obtain the desired results.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
63
Shooting in Monochrome
Still Images
Shoot images in black and white, sepia, or blue and white.
Movies
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
(
2
Choose a color tone.
● Press the [ ] button, choose a color tone
(either press the [ ][ ] buttons or turn the
[ ] dial), and then press the [ ] button.
● A preview is shown of how your shot will look with the effect applied.
3
Shoot.
B/W
Sepia
Blue
Black and white shots.
Sepia tone shots.
Blue and white shots.
Special Modes for Other Purposes
Auto Shooting after Face Detection (Smart
Shutter)
Still Images Movies
Auto Shooting after Smile Detection (Smile)
Still Images Movies
The camera shoots automatically after detecting a smile, even without you pressing the shutter button.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
( = 59) and choose [ ], and then
press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the
[ ] button.
● The camera now enters shooting standby mode, and [Smile Detection on] is displayed.
2
Aim the camera at a person.
● Each time the camera detects a smile, it will shoot after the lamp lights up.
● To pause smile detection, press the
[ ] button. Press the [ ] button again to resume detection.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
64
● Switch to another mode when you finish shooting, or the camera will continue shooting each time a smile is detected.
● You can also shoot as usual by pressing the shutter button.
● The camera can detect smiles more easily when subjects face the camera and open their mouth wide enough so that teeth are visible.
● To change the number of shots, press the [ ][ ] buttons after choosing [ ] in step 1.
● Automatic shooting is not available while you are holding down the [ ] button.
Auto Shooting after Wink Detection (Wink Self-Timer)
Still Images Movies
Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
(
= 59) and choose [ ], and then
press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the
[ ] button.
2
Compose the shot and press the shutter button halfway.
● Make sure a green frame is displayed around the face of the person who will wink.
3
Press the shutter button all the way down.
● The camera now enters shooting standby mode, and [Wink to take picture] is displayed.
● The lamp blinks and the self-timer sound is played.
4
Face the camera and wink.
● The camera will shoot about two seconds after detecting a wink by the person whose face is inside the frame.
● To cancel shooting after you have triggered the self-timer, press the
[ ] button.
● If the wink is not detected, wink again slowly and deliberately.
● Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
● Closing and opening both eyes at once will also be detected as a wink.
● If winking is not detected, the camera will shoot about 15 seconds later.
● To change the number of shots, press the [ ][ ] buttons after choosing [ ] in step 1.
● If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks.
● The zoom factor cannot be changed with the [ ] button after you press the shutter button all the way down.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
65
Auto Shooting after Detecting New Person (Face Self-
Timer)
Still Images Movies
The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area
( = 77). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
● Follow steps 1 – 2 in “Specific Scenes”
(
= 59) and choose [ ], and then
press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the
[ ] button.
2
Compose the shot and press the shutter button halfway.
● Make sure a green frame is displayed around the face you focus on and white frames around other faces.
3
Press the shutter button all the way down.
● The camera now enters shooting standby mode, and [Look straight at camera to start count down] is displayed.
● The lamp blinks and the self-timer sound is played.
4
Join the subjects in the shooting area and look at the camera.
● After the camera detects a new face, the lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot.
● To cancel shooting after you have triggered the self-timer, press the
[ ] button.
● Even if your face is not detected after you join the others in the shooting area, the camera will shoot about 15 seconds later.
● To change the number of shots, press the [ ][ ] buttons after choosing [ ] in step 1.
● The zoom factor cannot be changed with the [ ] button after you press the shutter button all the way down.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
66
Recording Various Movies
Still Images Movies
Recording Movies in Standard Mode
Still Images Movies
1
Enter [ ] mode.
● Set the mode dial to [ ].
● Press the [ ] button, choose [ ] in the menu, and then choose [ ] (
● Black bars are displayed on the top and bottom edges of the screen, and the subject is slightly enlarged. The black bars indicate image areas not recorded.
2
Configure the settings to suit the
movie (
172).
3
Shoot.
● Press the movie button.
● To stop movie recording, press the movie button again.
Shooting Movies with Smoother Motion
Shoot movies with smoother motion, at nearly double the frame rate, as follows.
●
Follow the steps in “Changing Movie
Image Quality” ( = 51) to choose
[ ].
Locking or Changing Image Brightness
Still Images Movies
You can lock the exposure before or during recording or adjust it in 1/3stop increments within a range of -2 to +2 stops.
1
Lock the exposure.
● Press the [ ] button to lock the exposure. The exposure shift bar is displayed.
● To unlock the exposure, press the [ ] button again.
2
Adjust the exposure.
● Turn the [ ] dial to adjust the exposure, as you watch the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
3
Shoot (
67).
67
Disabling Auto Slow Shutter
Still Images
Auto slow shutter can be disabled if movement in movies is rough.
However, under low light, movies may look dark.
Movies
● Press the [ ] button, choose [
Auto slow shutter] on the [ ] tab, and
then choose [Disable] ( = 29).
● To restore the original setting, repeat this process but choose [Enable].
● Auto slow shutter is only available for [ ] movies.
Correcting Severe Camera Shake
Still Images Movies
Counteract severe camera shake, such as when recording while moving.
The portion of images displayed changes more than for [Standard], and subjects are further enlarged.
● Follow the steps in “Recording Movies with Subjects at the Same Size Shown
before Shooting” ( = 53) to choose
[High].
● [Dynamic IS] is not available when [IS Mode] is set to [Off]
(
● Only [Standard] is available when the movie quality is set to
[ ].
Sound Settings
Still Images Movies
Deactivating the Wind Filter
Noise caused by strong wind can be reduced. However, the recording may sound unnatural when this option is used when there is no wind. In this case, you can deactivate the wind filter.
● Press the [ ] button, choose [Wind
Filter] on the [ ] tab, and then choose
Using the Attenuator
The attenuator can reduce audio distortion in noisy environments.
However, in quiet environments, it lowers the sound-recording level.
● Press the [ ] button, choose
[Attenuator] on the [ ] tab, and then
choose the desired option ( = 29).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
68
Recording Movies in Short Clip Mode
Still Images Movies
Apply playback effects to brief clips of a few seconds, such as fast motion, slow motion, or replay. Clips recorded in this mode may be included in
Story Highlights albums (
1
Enter [ ] mode.
● Set the mode dial to [ ].
● Press the [ ] button, choose [ ] in the menu, and then choose [ ] (
● Black bars displayed on the top and bottom edges of the screen indicate image areas not recorded.
2
Specify the shooting time and playback effect.
● Press the [ ] button.
● Turn the [ ] dial to set the shooting time
(4 – 6 sec.), and press the [ ][ ] buttons to set the playback effect.
3
Shoot (
67).
● A bar showing the elapsed time is displayed.
Playback Effects
2x Playback in fast motion
1x Playback at normal speed
1/2x Playback in slow motion
Normal playback with the last two seconds rewound and played again in slow motion
● Sound is not recorded in these clips.
● The movie quality is [ ] (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
69
P Mode
More discerning shots, in your preferred shooting style
● Instructions in this chapter apply to the camera with the mode dial set to [ ] mode.
● [ ]: Program AE; AE: Auto Exposure
● Before using a function introduced in this chapter in modes other than
[ ], make sure the function is available in that mode ( = 172).
Shooting in Program AE ([P] Mode)
Still Images Movies
You can customize many function settings to suit your preferred shooting style.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Customize the settings as desired
(
71 –
83), and then shoot.
● If the optimum exposure cannot be obtained when you press the shutter button halfway, the shutter speed and aperture value are displayed in orange. In this case, try adjusting the ISO speed
(
= 72) or activating the flash (if subjects are dark,
which may enable optimum exposure.
● Movies can be recorded in [ ] mode as well, by pressing the
movie button. However, some FUNC. ( = 28) and MENU
(
= 29) settings may be automatically adjusted for movie
recording.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
70
Image Brightness (Exposure)
Adjusting Image Brightness (Exposure
Compensation)
Still Images Movies
The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of -2 to +2.
● Press the [ ] button. As you watch the screen, turn the [ ] dial to adjust brightness, and then press the [ ] button again when finished.
● The correction level you specified is now displayed.
Locking Image Brightness / Exposure (AE Lock)
Still Images Movies
Before shooting, you can lock the exposure, or you can specify focus and exposure separately.
1
Lock the exposure.
● Aim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, press the
[ ] button.
● [ ] is displayed, and the exposure is locked.
● To unlock AE, release the shutter button and press the [ ] button again. In this case, [ ] is no longer displayed.
2
Compose the shot and shoot.
● After one shot, AE is unlocked and [ ] is no longer displayed.
● AE: Auto Exposure
● After the exposure is locked, you can adjust the combination of shutter speed and aperture value by turning the [ ] dial
(Program Shift).
Changing the Metering Method
Still Images Movies
Adjust the metering method (how brightness is measured) to suit shooting conditions as follows.
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
● The option you configured is now displayed.
Evaluative
Center
Weighted
Avg.
Spot
For typical shooting conditions, including backlit shots. Automatically adjusts exposure to match the shooting conditions.
Determines the average brightness of light across the entire image area, calculated by treating brightness in the central area as more important.
Metering restricted to within the [ ] (Spot AE
Point frame), displayed in the center of the screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
71
Changing the ISO Speed
Still Images Movies
Set the ISO speed to [AUTO] for automatic adjustment to suit the shooting mode and conditions. Otherwise, set a higher ISO speed for higher sensitivity, or a lower value for lower sensitivity.
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
(
● The option you configured is now displayed.
● To view the automatically determined ISO speed when you have set the ISO speed to [AUTO], press the shutter button halfway.
● Although choosing a lower ISO speed may reduce image graininess, there may be a greater risk of subject and camera shake in some shooting conditions.
● Choosing a higher ISO speed will increase shutter speed, which may reduce subject and camera shake and increase the flash range. However, shots may look grainy.
Correcting Image Brightness (i-Contrast)
Still Images Movies
Before shooting, excessively bright or dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast can also be automatically corrected before shooting to make subjects stand out better.
● Press the [ ] button, choose
[i-Contrast] on the [ ] tab, and then choose [Auto] (
● Once the setting is complete, [ ] is displayed.
● Under some shooting conditions, correction may be inaccurate or may cause images to appear grainy.
●
You can also correct existing images ( = 104).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
72
Image Colors
Capturing Natural Colors (White Balance)
Still Images Movies
By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting.
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
(
● The option you configured is now displayed.
Auto
Day Light
Cloudy
Tungsten
Automatically sets the optimal white balance for the shooting conditions.
For shooting outdoors in fair weather.
For shooting in cloudy weather or at twilight.
For shooting under ordinary incandescent lighting.
For shooting under white fluorescent lighting.
Fluorescent
Fluorescent H For shooting under daylight fluorescent lighting.
Custom
For manually setting a custom white balance
Custom White Balance
Still Images Movies
For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot.
●
Follow the steps in “Capturing Natural
Colors (White Balance)” ( = 73) to
choose [ ].
● Aim the camera at a plain white subject, so that the entire screen is white. Press the [ ] button.
● The tint of the screen changes once the white balance data has been recorded.
● Colors may look unnatural if you change camera settings after recording white balance data.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
73
Changing Image Color Tones (My Colors)
Still Images Movies
Change image color tones as desired, such as converting images to sepia or black and white.
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
(
● The option you configured is now displayed.
My Colors Off
Vivid
Neutral
–
Emphasizes contrast and color saturation, making images sharper.
Tones down contrast and color saturation for subdued images.
Creates sepia tone images.
Creates black and white images.
Sepia
B/W
Positive Film
Combines the effects of Vivid Blue, Vivid
Green, and Vivid Red to produce intense yet natural-looking colors resembling images on positive film.
Lighter Skin Tone Lightens skin tones.
Darker Skin Tone Darkens skin tones.
Vivid Blue
Vivid Green
Vivid Red
Custom Color
Emphasizes blues in images. Makes the sky, ocean, and other blue subjects more vivid.
Emphasizes greens in images. Makes mountains, foliage, and other green subjects more vivid.
Emphasizes reds in images. Makes red subjects more vivid.
Adjust contrast, sharpness, color saturation, and
other qualities as desired ( = 74).
●
White balance ( = 73) cannot be set in [ ] or [ ] modes.
● With [ ] and [ ] modes, colors other than people’s skin tone may change. These settings may not produce the expected results with some skin tones.
Custom Color
Still Images Movies
Choose the desired level of image contrast, sharpness, color saturation, red, green, blue, and skin tones in a range of 1 – 5.
1
Access the setting screen.
●
Follow the steps in “Changing Image
Color Tones (My Colors)” ( = 74) to
choose [ ], and then press the [ button.
]
2
Configure the setting.
● Press the [ ][ ] buttons to choose an item, and then specify the value by pressing the [ ][ ] buttons or turning the
[ ] dial.
● For stronger/more intense effects (or darker skin tones), adjust the value to the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to the left.
● Press the [ the setting.
] button to complete
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
74
Shooting Range and Focusing
Shooting Close-Ups (Macro)
Still Images Movies
To restrict the focus to subjects at close range, set the camera to [ ]. For
details on the range of focus, see “Lens” ( = 181).
● Press the [ ] button, choose [ ] (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● Once the setting is complete, [ ] is displayed.
● If the flash fires, vignetting may occur.
● In the yellow bar display area below the zoom bar, [ ] will turn gray and the camera will not focus.
● To prevent camera shake, try mounting the camera on a tripod
and shooting with the camera set to [ ] ( = 44).
Shooting in Manual Focus Mode
Still Images Movies
When focusing is not possible in AF mode, use manual focus. You can specify the general focal position and then press the shutter button halfway to have the camera determine the optimal focal position near
the position you specified. For details on the range of focus, see “Lens”
1
Choose [ ].
● Press the [ ] button, choose [ ] (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● [ ] and the MF indicator are displayed.
(1)
2
Specify the general focal position.
● Referring to the on-screen MF indicator
(1, which shows the distance and focal position) and the magnified display, press the [ ][ ] buttons or turn the [ ] dial to specify the general focal position, and then press the [ ] button.
● To adjust the magnification, press the [ ] button.
3
Fine-tune the focus.
● Press the shutter button halfway to have the camera fine-tune the focal position
(Safety MF).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
75
●
When you focus manually, the AF frame mode ( = 77) is
[Center] and AF frame size ( = 77) is [Normal], and these
settings cannot be changed.
● Focusing is possible when using the digital zoom (
digital tele-converter (
= 77), but the magnified display will not
appear.
● To focus more accurately, try attaching the camera to a tripod to stabilize it.
● You can enlarge or hide the magnified display area by adjusting
MENU (
] tab > [MF-Point Zoom] settings.
● To deactivate automatic focus fine-tuning when the shutter button is pressed halfway, choose MENU (
] tab > [Safety
MF] > [Off].
Easily Identifying the Focus Area (MF Peaking)
Still Images Movies
Edges of subjects in focus are displayed in color to make manual focusing easier. You can adjust the colors and the sensitivity (level) of edge detection as needed.
1
Access the setting screen.
● Press the [ ] button, choose [MF
Peaking Settings] on the [ ] tab, and then choose [On] (
2
Configure the setting.
● Choose a menu item to configure, and
then choose the desired option ( = 29).
● Colors displayed for MF peaking are not recorded in your shots.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
76
Digital Tele-Converter
Still Images Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster than it would be if you zoomed (including using digital zoom) in to the same zoom factor.
● Press the [ ] button, choose
[Digital Zoom] on the [ ] tab, and then choose the desired option (
● The view is enlarged and the zoom factor is displayed on the screen.
● The shutter speed may be equivalent when you move the zoom lever all the way toward [ ] for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step
2 in “Zooming In Closer on Subjects (Digital Zoom)” ( = 39).
Changing the AF Frame Mode
Still Images Movies
Change the AF (auto focus) frame mode to suit the shooting conditions as follows.
● Press the [ ] button, choose [AF
Frame] on the [ ] tab, and then choose
Center
Still Images Movies
One AF frame is displayed in the center. Effective for reliable focusing.
● A yellow AF frame is displayed with [ ] if the camera cannot focus when you press the shutter button halfway.
● To reduce the AF frame size, press the [ ] button and set
[AF Frame Size] on the [ ] tab to [Small] (
● The AF frame size is set to [Normal] when you use the digital
zoom ( = 39) or digital tele-converter (
focus mode (
● To compose shots so that subjects are positioned at the edge or in a corner, first aim the camera to capture the subject in an AF frame, and then hold the shutter button halfway down. As you continue to hold the shutter button halfway, recompose the shot as desired, and then press the shutter button all the way down
(Focus Lock).
Face AiAF
Still Images Movies
● Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ([ ] only).
● After you aim the camera at the subject, a white frame is displayed around the person’s face determined by the camera to be the main subject, and up to two gray frames are displayed around other detected faces.
● When the camera detects movement, frames will follow moving subjects, within a certain range.
● After you press the shutter button halfway, up to nine green frames are displayed around faces in focus.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
77
● If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in the areas in focus when you press the shutter button halfway.
●
If faces are not detected when Servo AF ( = 79) is set to
[Enable], the AF frame is displayed in the center of the screen when you press the shutter button halfway.
● Examples of faces that cannot be detected:
Subjects that are distant or extremely close
Subjects that are dark or light
Faces in profile, at an angle, or partly hidden
● The camera may misinterpret non-human subjects as faces.
● No AF frames are displayed if the camera cannot focus when you press the shutter button halfway.
Choosing Subjects to Focus On (Tracking AF)
Still Images
Shoot after choosing a subject to focus on as follows.
Movies
1
Choose [Tracking AF].
●
Follow the steps in “Changing the
AF Frame Mode” ( = 77) to choose
[Tracking AF].
● [ ] is displayed in the center of the screen.
2
Choose a subject to focus on.
● Aim the camera so that [ ] is on the desired subject, and then press the [ ] button.
● When the subject is detected, the camera beeps and [ ] is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range.
● If no subject is detected, [ ] is displayed.
● To cancel tracking, press the [ ] button again.
3
Shoot.
● Press the shutter button halfway. [ ] changes to a blue [ ], which follows the subject as the camera continues to adjust the focus and exposure (Servo AF)
● Press the shutter button all the way down to shoot.
● Even after your shot, [ ] is still displayed and the camera continues to track the subject.
● [Servo AF] (
= 79) is set to [Enable] and cannot be changed.
● Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
● [ ] is not available.
● The camera can detect subjects even if you press the shutter button halfway without pressing the [ ] button. After your shot,
[ ] is displayed in the center of the screen.
● When shooting in [
] mode ( = 75), press and hold the [ ]
button for at least one second.
● If [Face ID] is set to [On], names will not be displayed when registered people are detected, but the names will be recorded
in the still images ( = 45). However, when you choose a
registered person as the subject, their name is displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
78
Shooting with Servo AF
Still Images Movies
This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway.
1
Configure the setting.
● Press the [ ] button, choose [Servo
AF] on the [ ] tab, and then choose
2
Focus.
● The focus and exposure are maintained where the blue AF frame is displayed while you are pressing the shutter button halfway.
● Focusing may not be possible in some shooting conditions.
● In low-light conditions, Servo AF may not be activated (AF frames may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the specified AF frame mode.
● If optimum exposure cannot be obtained, the shutter speed and aperture value are displayed in orange. Release the shutter button, and then press it halfway again.
● AF lock shooting is not available.
●
Not available when using the self-timer ( = 43).
Changing the Focus Setting
Still Images Movies
You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the shutter button halfway.
● Press the [ ] button, choose
[Continuous AF] on the [ ] tab, and then
Enable
Disable
Helps avoid missing sudden photo opportunities, because the camera constantly focuses on subjects until you press the shutter button halfway.
Conserves battery power, because the camera does not focus constantly.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
79
Shooting with the AF Lock
Still Images Movies
The focus can be locked. After you lock the focus, the focal position will not change even when you release your finger from the shutter button.
1
Lock the focus.
● With the shutter button pressed halfway, press the [ ] button.
● The focus is now locked, and [ ] and the MF indicator are displayed.
● To unlock the focus, after you release the shutter button, press the [ ] button again and choose [ ] (either press the [ ][ ] buttons or turn the [ ] dial).
2
Compose the shot and shoot.
Shooting Continuously as the Camera Keeps the
Subject in Focus
Still Images Movies
Shoot continuously as the camera keeps the subject in focus. For details
on the continuous shooting speed, see “Shooting” ( = 182).
1
Configure the setting.
● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] ( = 28).
● Once the setting is complete, [ ] is displayed.
2
Shoot.
● Hold the shutter button all the way down to shoot continuously.
● The images are managed together as a group (
● In [ ] mode (
AF is locked ( = 80), [ ] is changed to [ ].
●
Cannot be used with the self-timer ( = 43).
● Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position.
● As more shots are taken, shooting may slow down.
● Shooting may slow down if the flash fires.
● Continuous shooting is not available in [ ] Auto mode (
even if you choose [ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
80
Flash
Changing the Flash Mode
Still Images Movies
You can change the flash mode to match the shooting scene. For details
on the flash range, see “Flash” ( = 181).
1
Raise the flash.
● Move the [ ] switch.
2
Configure the setting.
● Press the [ ] button, choose a flash mode (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● The option you configured is now displayed.
● The setting screen cannot be accessed by pressing the [ ] button when the flash is lowered. Move the [ ] switch to raise the flash, then configure the setting.
Auto
Fires automatically in low-light conditions.
On
Fires for each shot.
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a slower shutter speed to illuminate backgrounds out of flash range.
● In [ ] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure the camera (
● In [ ] mode, even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing.
Off
For shooting without the flash.
● If a blinking [ ] icon is displayed when you press the shutter button halfway in camera-shake inducing, low-light conditions, mount the camera on a tripod or take other measures to keep it still.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
81
Adjusting the Flash Exposure Compensation
Still Images Movies
Just as with regular exposure compensation (
flash exposure from –2 to +2 stops, in 1/3-stop increments.
● Press the [ ] button, choose [ ] in the menu, and adjust the setting by either pressing the [ ][ ] buttons or turning
● The correction level you specified is now displayed.
● When there is a risk of overexposure, the camera automatically adjusts the shutter speed or aperture value for flash shots to reduce washed-out highlights and shoot at optimal exposure.
However, you can deactivate automatic adjustment of the shutter
speed and aperture value by accessing MENU ( = 29) and
choosing [ ] tab > [Flash settings] > [Safety FE] > [Off].
● You can also configure the flash exposure compensation by accessing MENU (
] tab > [Flash settings] > [Flash Exp. Comp].
●
You can also access the [Flash settings] MENU screen ( = 29)
when the flash is up by pressing the [ ] button and immediately pressing the [ ] button.
Shooting with the FE Lock
Still Images Movies
Just as with the AE lock (
= 71), you can lock the exposure for flash
shots.
1
Raise the flash and set it to [
]
(
81).
2
Lock the flash exposure.
● Aim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, press the
[ ] button.
● The flash fires, and when
[ ] is displayed, the flash output level is retained.
● To unlock FE, release the shutter button and press the [ ] button again. In this case, [ ] is no longer displayed.
3
Compose the shot and shoot.
● After one shot, FE is unlocked and [ ] is no longer displayed.
● FE: Flash Exposure
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
82
Other Settings
Changing the Compression Ratio (Image Quality)
Still Images Movies
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as follows. For guidelines on how many shots at each compression ratio can
fit on a memory card, see “Recording” ( = 182).
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
(
Changing the IS Mode Settings
Still Images
You can keep image stabilization off until the moment you shoot.
Movies
● Follow steps 1 – 2 in “Deactivating Image
Stabilization” ( = 53) and choose
[Shoot Only].
● If image stabilization cannot prevent camera shake, mount the camera on a tripod or take other measures to hold it still. In this case, set [IS Mode] to [Off].
● The setting is changed to [Continuous] for movie recording.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
83
Tv, Av, and M Mode
Take smarter, more sophisticated shots, and customize the camera for your shooting style
● Instructions in this chapter apply to the camera as set to the respective mode.
Specific Shutter Speeds ([Tv] Mode)
Still Images Movies
Set your preferred shutter speed before shooting as follows. The camera automatically adjusts the aperture value to suit your shutter speed.
For details on available shutter speeds, see “Shutter” ( = 181).
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Set the shutter speed.
● Turn the [ ] dial to set the shutter speed.
● In conditions requiring slower shutter speeds, there may be a delay before you can shoot again, as the camera processes images to reduce noise.
● When shooting at low shutter speeds on a tripod, you should set
[IS Mode] to [Off] (
● Maximum shutter speed with the flash is 1/2000 second. If you specify a faster speed, the camera will automatically reset the speed to 1/2000 second before shooting.
● With shutter speeds of 1.3 seconds or slower, ISO speed is [80] and cannot be changed.
● Orange display of the aperture value when you press the shutter button halfway indicates that the optimum exposure has not been obtained. Adjust the shutter speed until the aperture value is
displayed in white, or use safety shift ( = 85).
● [ ]: Time value
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
84
Specific Aperture Values ([Av] Mode)
Still Images Movies
Set your preferred aperture value before shooting as follows. The camera automatically adjusts the shutter speed to suit your aperture value.
For details on available aperture values, see “Aperture” ( = 181).
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Set the aperture value.
● Turn the [ ] dial to set the aperture value.
● Orange display of the shutter speed when you press the shutter button halfway indicates that the optimum exposure has not been obtained. Adjust the aperture value until the shutter speed is displayed in white, or use safety shift (see below).
● [ ]: Aperture value (size of the opening made by the diaphragm in the lens)
● In [ ] and [ ] modes, press the [ ] button and set [Safety shift] on the [
] tab to [On] ( = 29) to have the
camera automatically adjust the shutter speed and aperture value when there are exposure problems, so that you can shoot at the optimum exposure.
However, safety shift is disabled when the flash fires.
Specific Shutter Speeds and
Aperture Values ([M] Mode)
Still Images Movies
Follow these steps before shooting to set your preferred shutter speed and aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see “Shutter”
( = 181) and “Aperture” ( = 181).
1
Enter [ ] mode.
● Set the mode dial to [ ].
(1) (2)
(3)
(4)
2
Configure the setting.
● Press the [ ] button to choose shutter speed (1) or aperture value (2), and turn the [ ] dial to specify a value.
● An exposure level mark (4) based on your specified values is shown on the exposure level indicator for comparison to the optimum exposure (3).
● The exposure level mark is shown in orange when the difference from optimum exposure exceeds 2 stops.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
85
● After you set the shutter speed and aperture value, the exposure level may change if you adjust the zoom or recompose the shot.
● Screen brightness may change depending on your specified shutter speed and aperture value. However, screen brightness remains the same when the flash is up and the mode is set to [ ].
● To have the setting that is not chosen in step 2 (whether shutter speed or aperture value) automatically adjusted to obtain optimum exposure, hold the shutter button halfway and press the
[ ] button. Note that optimum exposure may not be possible with some settings.
● With shutter speeds of 1.3 seconds or slower, ISO speed is [80] and cannot be changed.
● [ ] Auto mode is not available in [ ] mode.
● [ ]: Manual
● Calculation of optimum exposure is based on the specified
Adjusting the Flash Output
Still Images
Choose from the three flash levels in [ ] mode.
1
Enter [ ] mode.
● Set the mode dial to [ ].
Movies
2
Configure the setting.
● Press the [ ] button, choose [ ] in the menu, and adjust the setting by either pressing the [ ][ ] buttons or turning
● Once the setting is complete, the flash output level is displayed.
[ ]: Minimum, [
Maximum
]: Medium, [ ]:
●
You can also set the flash level by accessing MENU ( = 29)
and choosing [ ] tab > [Flash settings] > [Flash Output].
● You can also set the flash level in [ ] or [ ] mode by
accessing MENU ( = 29) and choosing [
] tab > [Flash settings] > [Flash Mode] > [Manual].
● You can also access the [Flash settings] MENU screen (
when the flash is up by pressing the [ ] button and immediately pressing the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
86
Playback Mode
Have fun reviewing your shots, and browse or edit them in many ways
● To prepare the camera for these operations, press the [ ] button to enter Playback mode.
● It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras.
Viewing
Still Images Movies
After shooting images or movies, you can view them on the screen as follows.
1
Enter Playback mode.
● Press the [ ] button.
● Your last shot is displayed.
2
Choose images.
● To view the previous image, press the [ ] button or turn the [ ] dial counterclockwise. To view the next image, press the [ ] button or turn the
[ ] dial clockwise.
● Press and hold the [ ][ ] buttons to browse through images quickly.
● To access this screen (Scroll Display mode), turn the [ ] dial rapidly. In this mode, turn the [ ] dial to browse through images.
● To return to single-image display, press the [ ] button.
● To browse images grouped by shooting date, press the [ ][ ] buttons in Scroll
Display mode.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
87
● Movies are identified by a [
To play movies, go to step 3.
] icon.
3
Play movies.
● To start playback, press the [ ] button, choose [ ] (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button again.
(1)
4
Adjust the volume.
● Press the [ ][ ] buttons to adjust the volume.
● To adjust the volume when the volume indicator (1) is no longer displayed, press the [ ][ ] buttons.
5
Pause playback.
● To pause or resume playback, press the
[ ] button.
● After the movie is finished, [ displayed.
] is
● To switch to Shooting mode from Playback mode, press the shutter button halfway.
● To deactivate Scroll Display, choose MENU (
> [Scroll Display] > [Off].
] tab
● To have the most recent shot displayed when you enter Playback
] tab > [Resume] > [Last shot].
● To change the transition shown between images, access MENU
( = 29) and choose your desired effect on the [
] tab >
[Transition Effect].
Switching Display Modes
Still Images Movies
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” ( = 171).
No Information Display
Simple Information Display
Detailed Information Display
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
GPS Information Display
88
Overexposure Warning (for Image Highlights)
Still Images
Washed-out highlights in the image flash on the screen in detailed
Movies
Histogram
Still Images Movies
● The graph in detailed information display
(
= 88) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree of brightness, and the vertical axis, how much of the image is at each level of brightness. Viewing the histogram is a way to check exposure.
GPS Information Display
Still Images Movies
● Still images and movies you shoot can be geotagged using GPS information (such as latitude, longitude, and elevation) from a Bluetooth enabled smartphone
(
= 136). You can review this information
in the GPS information display.
● Latitude, longitude, elevation, and UTC
(shooting date and time) are listed from top to bottom.
● GPS information display is not available for images that lack this information.
● [---] is shown instead of numerical values for items not available on your smartphone or items not recorded correctly.
● UTC: Coordinated Universal Time, essentially the same as
Greenwich Mean Time
Viewing Short Movies Recorded in Creative Shot
Mode (Creative Shot Movies)
Still Images
Play back Creative Shot movies recorded in [ ] mode (
Movies
1
Choose a movie.
● Press the [ ] button and choose
[Play Creative Shot Movies] on the [ ] tab (
2
Play the movie.
● Select a movie and press the [ ] button to play it.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
89
Viewing Short Movies Created When Shooting
Still Images (Digest Movies)
Still Images Movies
View digest movies recorded automatically in [ ] mode (
day of still image shooting as follows.
1
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a still image labeled with
[ ].
2
Play the digest movie.
● Press the [ ] button, and then choose
[
● The digest movie recorded automatically on the day of still image shooting is played back from the beginning.
● After a moment, [ ] will no longer be displayed when you are using the camera with information display deactivated
Viewing by Date
Digest movies can be viewed by date.
1
Choose a movie.
● Press the [ ] button, choose [List/
Play Digest Movies] on the [ ] tab, and then choose a date (
2
Play the movie.
● Press the [ ] button to start playback.
Checking People Detected in Face ID
Still Images Movies
If you switch the camera to simple information display mode ( = 88),
the names of up to five detected people registered in Face ID ( = 45)
will be displayed.
● Press the [ ] button several times until simple information display is activated, and then press the [ ][ ] buttons or turn the [ ] dial to choose an image.
● Names will be displayed on detected people.
● If you prefer not to have names displayed on images shot using
Face ID, choose MENU (
] tab > [Face ID Info] >
[Name Display] > [Off].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
90
Browsing and Filtering Images
Navigating through Images in an Index
Still Images Movies
By displaying multiple images in an index, you can quickly find the images you are looking for.
1
Display images in an index.
● Move the zoom lever toward [ ] to display images in an index. Moving the lever again will increase the number of images shown.
● To display fewer images, move the zoom lever toward [ ]. Fewer images are shown each time you move the lever.
2
Choose an image.
● Turn the [ ] dial to scroll through the images.
● Press the [ ][ ][ ][ ] buttons to choose an image.
● An orange frame is displayed around the selected image.
● Press the [ ] button to view the selected image in single-image display.
● To deactivate the 3D display effect (shown if you hold down the
[ ][ ] buttons or turn the [ ] dial rapidly), choose MENU
] tab > [Index Effect] > [Off].
Finding Images Matching Specified Conditions
Still Images Movies
Find desired images quickly on a memory card full of images by filtering image display according to your specified conditions. You can also protect
= 98) these images all at once.
Name
People
Shot Date
Displays images of a registered person (
Displays images with detected faces.
Displays the images shot on a specific date.
Favorites Displays images tagged as favorites (
1
Choose a search condition.
● Press the [ ] button, choose [ ] in the
menu, and choose a condition ( = 28).
● When you have selected [ ], [ ], or
[ ], choose the condition by pressing the [ ][ ][ ][ ] buttons on the screen displayed, and then press the [ ] button.
2
View the filtered images.
● Images matching your conditions are displayed in yellow frames. To view only these images, press the [ ][ ] buttons, or turn the [ ] dial.
● To cancel filtered display, choose [ ] in step 1.
● When the camera has found no corresponding images for some conditions, those conditions will not be available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
91
● To show or hide information, press the [ ] button in step 2.
● Options for viewing the images found (in step 2) include
“Navigating through Images in an Index” ( = 91), “Magnifying
Images” ( = 94), and “Viewing Slideshows” ( = 94). You can
also apply image operations to all images found, by choosing
[Protect All Images in Search] in “Protecting Images” ( = 96) or
[Select All Images in Search] in “Erasing Multiple Images at Once”
( = 98), “Adding Images to the Print List (DPOF)” (
“Adding Images to a Photobook” ( = 163).
● If you edit images and save them as new images (
= 106), a message is displayed, and the images that were
found are no longer shown.
Viewing Individual Images in a Group
Still Images Movies
Images shot continuously ( = 44,
[
] mode ( = 56) are grouped, and only the first image is displayed.
However, you can also view the images individually.
1
Choose a grouped image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image labeled with
[ ].
2
Choose [ ].
● Press the [ ] button, and then choose
[ ] in the menu (
3
View images in the group individually.
● Pressing the [ ][ ] buttons or turning the
[ ] dial will display only images in the group.
● To cancel group playback, press the [ ] button, choose [ ] in the menu, and
press the [ ] button again ( = 28).
● During group playback (step 3), you can browse through images
quickly “Navigating through Images in an Index” ( = 91) and
magnify them “Magnifying Images” ( = 94). You can apply your
actions to all images in the group at once by choosing [Protect All
Images in Group] in “Protecting Images” ( = 96), [All Images in
Group] in “Erasing Multiple Images at Once” ( = 98), [Select All
in Group] in “Adding Images to the Print List (DPOF)” ( = 161),
or [Select All in Group] in “Adding Images to a Photobook”
● To ungroup images so that they are displayed only as single still images, choose MENU (
] tab > [Group Images]
> [Off]. However, grouped images cannot be ungrouped during individual playback.
● Simultaneous display in [ ] mode as described in step 2 of
“Enjoying a Variety of Images from Each Shot” ( = 56) is only
shown immediately after you shoot.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
92
Editing Face ID Information
If you notice that a name is incorrect during playback, you can change it or erase it.
However, you cannot add names for people who are not detected by Face
ID (names are not displayed), and for people whose names have been erased.
Changing Names
1
Access the setting screen.
● Press the [ ] button and choose
[Face ID Info] on the [
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Edit ID Info], and then press the [ ] button.
2
Choose an image.
●
Following the procedure in “Checking
People Detected in Face ID” ( = 90),
choose an image and press the [ ] button.
● An orange frame is displayed around the selected face. When multiple names are displayed in an image, press the [ ][ ] buttons or turn the [ ] dial to choose the name to change, and then press the [ ] button.
Erasing Names
3
Choose the editing option.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [Overwrite], and then press the [ ] button.
4
Choose the name of the person to overwrite with.
● Follow step 2 in “Overwriting and Adding
Face Information” ( = 48) to choose
the name of the person you want to overwrite with.
● On the screen displayed in step 3 in
“Changing Names” (
[Erase] and press the [ ] button.
● After [Erase?] is displayed, press the
[ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
93
Image Viewing Options
Magnifying Images
Still Images Movies
1
Magnify an image.
● Moving the zoom lever toward [ ] will zoom in and magnify the image. You can magnify images up to about 10x by continuing to hold the zoom lever.
● The approximate position of the displayed area (1) is shown for reference.
● To zoom out, move the zoom lever toward [ ]. You can return to singleimage display by continuing to hold it.
(1) 2
Move the display position and switch images as needed.
● To move the display position, press the
[ ][ ][ ][ ] buttons.
● To switch to other images while zoomed, turn the [ ] dial.
● You can return to single-image display from magnified display by pressing the [ ] button.
Viewing Slideshows
Still Images Movies
Automatically play back images from a memory card as follows. Each image is displayed for about three seconds.
● Press the [ ] button, choose [ ] in the menu, and choose the desired option
● The slideshow will start after [Loading image] is displayed for a few seconds.
● Press the [ slideshow.
] button to stop the
● The camera’s power-saving functions (
during slideshows.
● To pause or resume slideshows, press the [ ] button.
● You can switch to other images during playback by pressing the
[ ][ ] buttons or turning the [ ] dial. For fast-forward or fastrewind, hold the [ ][ ] buttons down.
●
In filtered display ( = 91), only images matching search
conditions are played.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
94
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image.
1
Access the setting screen.
● Press the [ ] button, and then choose [Slideshow] on the [ ] tab
(
2
Configure the setting.
● Choose a menu item to configure, and then choose the desired option (
● To start the slideshow with your settings, choose [Start] and press the [ ] button.
● To return to the menu screen, press the
[ ] button.
Auto Playback of Related Images (Smart Shuffle)
Still Images Movies
Based on the current image, the camera offers four images that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after you have taken many shots, in many kinds of scenes.
1
Choose Smart Shuffle.
● Press the [ ] button, and then choose
[ ] in the menu (
● Four candidate images are displayed.
2
Choose an image.
● Press the [ ][ ][ ][ ] buttons to choose the image you want to view next.
● Your chosen image is displayed in the center, surrounded by the next four candidate images.
● For full-screen display of the center image, press the [ ] button. To restore the original display, press the [ ] button again.
● Press the [ ] button to restore single-image display.
● Smart Shuffle is not available in the following cases:
There are less than 50 shots taken with this camera
An unsupported image is currently displayed
Images are shown in filtered display (
-
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
95
Protecting Images
Still Images
Protect important images to prevent accidental erasure (
Movies
● Press the [ ] button, and then choose
[
] in the menu ( = 28). [Protected]
is displayed.
● To cancel protection, repeat this process and choose [ ] again, and then press the [ ] button.
● Protected images on a memory card will be erased if you format
● Protected images cannot be erased using the camera’s erasure function. To erase them this way, first cancel protection.
Using the Menu
1
Access the setting screen.
● Press the [ ] button and choose
[Protect] on the [
2
Choose a selection method.
●
Choose an option as desired ( = 29).
● To return to the menu screen, press the
[ ] button.
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Using the Menu”
( = 96), choose [Select] and press the
[ ] button.
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button. [ ] is displayed.
● To cancel selection, press the [ ] button again. [ ] is no longer displayed.
● Repeat this process to specify other images.
3
Protect the image.
● Press the [ ] button. A confirmation message is displayed.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
96
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Using the Menu”
(
= 96), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
● Press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
3
Choose an ending image.
● Press the [ ] button to choose [Last image], and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
● Images before the first image cannot be selected as the last image.
4
Protect the images.
● Press the [ ] button to choose [Protect], and then press the [ ] button.
● You can also choose the first or last image by turning the [ ] dial when the top screen in steps 2 and 3 is displayed.
● To cancel protection for groups of images, choose [Unlock] in step 4.
Protecting All Images at Once
1
Choose [Protect All Images].
● Following step 2 in “Using the Menu”
( = 96), choose [Protect All Images]
and press the [ ] button.
2
Protect the images.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
Clearing All Protection at Once
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of “Protecting
All Images at Once”, and then complete step 2.
97
Erasing Images
Still Images Movies
You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (
1
Choose an image to erase.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image.
2
Erase the image.
● Press the [ ] button.
● After [Erase?] is displayed, press the
[ ][ ] buttons or turn the [ ] dial to choose [Erase], and then press the [ ] button.
● The current image is now erased.
● To cancel erasure, press the [ ][ ] buttons or turn the [ ] dial to choose
[Cancel], and then press the [ ] button.
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when erasing images, because they cannot be recovered. However, protected images (
Choosing a Selection Method
1
Access the setting screen.
● Press the [ ] button, and then choose [Erase] on the [ ] tab (
2
Choose a selection method.
●
Choose the desired item ( = 29).
● To return to the menu screen, press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
98
Choosing Images Individually
1
Choose [Select].
● Following step 2 in “Choosing a Selection
Method” ( = 98), choose [Select] and
press the [ ] button.
2
Choose an image.
● Once you choose an image following step 2 in “Choosing Images Individually”
(
● To cancel selection, press the [ ] button again. [ ] is no longer displayed.
● Repeat this process to specify other images.
3
Erase the images.
● Press the [ ] button. A confirmation message is displayed.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Choosing a Selection
Method” ( = 98), choose [Select
Range] and press the [ ] button.
2
Choose images.
● Follow steps 2 – 3 in “Selecting a Range”
3
Erase the images.
● Press the [ ] button to choose [Erase], and then press the [ ] button.
Specifying All Images at Once
1
Choose [Select All Images].
● Following step 2 in “Choosing a Selection
Method” ( = 98), choose [Select All
Images] and press the [ ] button.
2
Erase the images.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
99
Rotating Images
Still Images
Change the orientation of images and save them as follows.
Movies
1
Choose [ ].
● Press the [ ] button, and then choose
2
Rotate the image.
● Press the [ ] or [ ] button, depending on the desired direction. Each time you press the button, the image is rotated
90°. Press the [ ] button to complete the setting.
● Rotation is not possible when [Auto Rotate] is set to [Off]
Using the Menu
1
Choose [Rotate].
● Press the [ ] button and choose
[Rotate] on the [ ] tab (
2
Rotate the image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image.
● The image is rotated 90° each time you press the [ ] button.
● To return to the menu screen, press the
[ ] button.
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates images based on the current camera orientation.
● Press the [ ] button, choose [Auto
Rotate] on the [ ] tab, and then choose
● Images cannot be rotated (
= 100) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in the original orientation.
●
In Smart Shuffle ( = 95) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and rotated images will be displayed in the rotated orientation.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
100
Tagging Images as Favorites
Still Images Movies
You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images.
●
87), “Viewing Slideshows” ( = 94), “Protecting
Images” ( = 96), “Erasing Images” (
the Print List (DPOF)” ( = 161), “Adding Images to a Photobook”
● Press the [ ] button, and then choose
● [Tagged as Favorite] is displayed.
● To untag the image, repeat this process and choose [ ] again, and then press the [ ] button.
Using the Menu
1
Choose [Favorites].
● Press the [ ] button and choose
[Favorites] on the [
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button. [ ] is displayed.
● To untag the image, press the [ ] button again. [ ] is no longer displayed.
● Repeat this process to choose additional images.
3
Finish the setup process.
● Press the [ ] button. A confirmation message is displayed.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● Images will not be tagged as favorites if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3.
● Tagging images as favorites makes it easier to add them when
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
101
Editing Still Images
● Image editing (
= 104) is only available when the
memory card has sufficient free space.
Resizing Images
Still Images
Save a copy of images at a lower number of recording pixels.
Movies
1
Choose [Resize].
● Press the [ ] button and choose
[Resize] on the [
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
3
Choose an image size.
● Press the [ ][ ] buttons or turn the [ ] dial to choose the size, and then press the [ ] button.
● [Save new image?] is displayed.
4
Save the new image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● The image is now saved as a new file.
5
Review the new image.
● Press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Processed img.], and then press the [ ] button.
● The saved image is now displayed.
● Editing is not possible for images shot at a recording pixel setting of [ ] (
● Images cannot be resized to a higher number of recording pixels.
● Choosing [Original image] in step 5 will display the original image.
Cropping
Still Images Movies
You can specify a portion of an image to save as a separate image file.
1
Choose [Cropping].
● Press the [ ] button, and then choose [Cropping] on the [ ] tab
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
102
(1) (2) (3)
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
3
Adjust the cropping area.
● A frame is displayed around the portion of the image to be cropped (1).
● The original image is shown in the upper left, and a preview of the image as cropped (2) is shown in the lower right.
You can also see the number of recording pixels after cropping (3).
● To resize the frame, move the zoom lever.
● To move the frame, press the
[ ][ ][ ][ ] buttons.
● To change the frame orientation, press the [ ] button.
● Faces detected in the image are enclosed in gray frames in the upper-left image. Turn the [ ] dial to switch frames, which position the cropping area.
● Press the [ ] button.
4
Save as a new image and review.
● Follow steps 4 – 5 in “Resizing Images”
(
● Editing is not possible for images shot at a recording pixel setting of [ ] (
● Images supported for cropping will have the same aspect ratio after cropping.
● Cropped images will have a lower number of recording pixels than uncropped images.
● If you crop still images shot using Face ID (
names of the people left in the cropped image will remain.
Changing Image Color Tones (My Colors)
Still Images Movies
You can adjust image colors and then save the edited image as a
separate file. For details on each option, see “Changing Image Color
1
Choose [My Colors].
● Press the [ ] button, and then choose [My Colors] on the [ ] tab
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
3
Choose an option.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an option, and then press the [ ] button.
4
Save as a new image and review.
● Follow steps 4 – 5 in “Resizing Images”
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
103
● Image quality of pictures you repeatedly edit this way will be a little lower each time, and you may not be able to obtain the desired color.
● The color of images edited using this function may vary slightly
from the color of images shot using My Colors ( = 74).
Correcting Image Brightness (i-Contrast)
Still Images Movies
Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast is also automatically corrected, to make subjects stand out better. Choose from four correction levels, and then save the image as a separate file.
1
Choose [i-Contrast].
● Press the [ ] button, and then choose [i-Contrast] on the [ ] tab
(
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
3
Choose an option.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an option, and then press the [ ] button.
4
Save as a new image and review.
● Follow steps 4 – 5 in “Resizing Images”
● For some images, correction may be inaccurate or may cause images to appear grainy.
● Images may look grainy after repeated editing using this function.
● If [Auto] does not produce the expected results, try correcting images using [Low], [Medium], or [High].
Correcting Red-Eye
Still Images Movies
Automatically corrects images affected by red-eye. You can save the corrected image as a separate file.
1
Choose [Red-Eye Correction].
● Press the [ ] button, and then choose [Red-Eye Correction] on the [ ] tab (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
104
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image.
3
Correct the image.
● Press the [ ] button.
● Red-eye detected by the camera is now corrected, and frames are displayed around corrected image areas.
● Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
4
Save as a new image and review.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [New File], and then press the [ ] button.
● The image is now saved as a new file.
● Follow step 5 in “Resizing Images”
(
● Some images may not be corrected accurately.
● To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
● Protected images cannot be overwritten.
Editing Movies
Still Images Movies
You can remove unneeded portions from the beginning and end of movies
(excluding digest movies, = 35).
1
Choose [ ].
● Following steps 1 – 5 in “Viewing”
( = 87), choose [ ] and press the [ ]
button.
● The movie editing panel and editing bar are now displayed.
(2)
(1)
2
Specify portions to cut.
● (1) is the movie editing panel, and (2) is the editing bar.
● Press the [ ][ ] buttons to choose [ ] or [ ].
● To view the portions you can cut
(identified by [ ] on the screen), press the [ ][ ] buttons or turn the [ ] dial to move [ ]. Cut the beginning of the movie
(from [ ]) by choosing [ ], and cut the end of the movie by choosing [ ].
● If you move [ ] to a position other than a
[ ] mark, in [ ] the portion before the nearest [ ] mark on the left will be cut, while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
105
3
Review the edited movie.
● Press the [ ][ ] buttons to choose [ ], and then press the [ ] button. The edited movie is now played.
● To edit the movie again, repeat step 2.
● To cancel editing, press the [ ] button, choose [OK] (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
4
Save the edited movie.
● Press the [ ][ ] buttons to choose [ ], and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [New File], and then press the [ ] button.
● Choose [Save w/o Comp.], and then press the [ ] button.
● The movie is now saved as a new file.
Reducing File Sizes
Movie file sizes can be reduced by compressing movies as follows.
● On the screen in step 2 of “Editing
Movies”, choose [ ]. Choose [New File], and then press the [ ] button.
● Choose [Compress & Sav.], and then press the [ ] button.
● Compressed movies are saved in [
● [ ] movies cannot be compressed.
] format.
● Edited movies cannot be saved in compressed format when you choose [Overwrite].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
● To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be erased.
● If the memory card lacks sufficient space, only [Overwrite] will be available.
● Movies may not be saved if the battery pack runs out while saving is in progress.
● When editing movies, you should use a fully charged battery pack.
106
Erasing Movie Chapters
Still Images Movies
Individual chapters (clips) ( = 35,
] or [ ] mode can be erased. Be careful when erasing clips, because they cannot be recovered.
1
Select the clip to erase.
● Play a short movie as described in steps
1 – 2 of “Viewing Short Movies Recorded in Creative Shot Mode (Creative Shot
Movies)” ( = 89) or “Viewing Short
Movies Created When Shooting Still
Images (Digest Movies)” (
then press the [ ] button to access the movie control panel.
● To choose the clip, press the [ ][ ] buttons or turn the [ ] dial to choose [ ] or [ ], and then press the [ ] button.
2
Choose [ ].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
● The selected clip is played back repeatedly.
3
Confirm erasure.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● The clip is erased, and the short movie is overwritten.
● Albums with background music (
● [ ] is not displayed if you select a clip when the camera is connected to a printer.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
107
Viewing Albums (Story Highlights)
Still Images Movies
You can choose themes such as a date or person’s name to create an album of automatically selected images that match the theme. These images are combined into a slideshow that can be saved as a short movie of about 2 – 3 minutes.
Before using this feature, make sure the battery pack is fully charged.
Creating albums also requires free space on the memory card. As a guideline, use a memory card with a capacity of 16 GB or higher, and ensure at least 1 GB of free space.
Choosing Themes for Albums
Press the [ ] button to access the home screen and choose themes for the camera to use when selecting album elements. Note that the camera
is more likely to add images tagged as favorites ( = 101) to albums.
Date
Person’s name
Event
Custom
Creates an album of images shot on the same day.
Images are selected from those shot on the same day as the image displayed before you access the home screen.
Can be used to create monthly albums of people, such as albums of children as they grow up.
Subjects whose Face ID information you registered before shooting may be selected for albums.
Images selected are those that have the same subject shot during the same month as the image displayed before you access the home screen.
A good choice for albums of vacations, parties, or other events.
Images are selected from those shot during the event before and after the image displayed before you access the home screen.
Includes images based on your specified images, dates, or people registered in Face ID.
1
Choose an image.
● Choose an image in single-image display.
● Themes available in step 3 will vary depending on image shooting date and
Face ID information.
2
Access the home screen.
● Press the [ ] button.
● After [Busy] is displayed, the home screen is displayed.
3
Preview an album.
● Choose a person, [Date], or [Event]
(either press the [ ][ ] buttons or turn the
[ ] dial) as the album theme, and then press the [ ] button.
● After [Loading] is displayed for a few seconds, the album is played.
4
Save the album.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Save Album as Movie], and then press the [ ] button.
● Once the album is saved, [Saved] is displayed.
5
Play the album (
87).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
108
● Albums can include following images captured by the camera.
Still images
Digest movies (
Short movie clips (
= 69) of two seconds or longer, or
Creative Shot movies ( = 57), except compressed movies
● Albums cannot be saved unless there is enough space on the memory card.
● To jump to the next chapter during the preview, press the [ ] button, and to jump to the previous chapter, press the [ ] button.
● You can specify the color effect in step 4 by choosing [Change
Color Effect] and pressing the [ ] button. To preview how the album looks with your selected effect applied, choose [Preview
Album Again] on the screen in step 4 after pressing the [ ][ ] buttons to choose a color effect and pressing the [ ] button.
● To play saved albums, choose [List of Albums] on the Story
Highlights home screen, press the [ ] button, choose a listed album, and press the [ ] button again.
Adding Background Music to Albums
Still Images Movies
Choose from seven kinds of background music to play during album playback.
1
Register background music to a memory card.
●
Following steps 1 – 4 in “Viewing Albums
(Story Highlights)” ( = 108), choose
[Music Settings] and press the [ ] button.
● The screen at left is displayed when you use a new or recently formatted memory card. Choose [OK], press [ ], and wait until the seven types of music are registered to the card, which takes about four minutes.
● When using a memory card with music already registered to it, go to step 2.
2
Create the album.
●
Follow steps 1 – 3 in “Viewing Albums
(Story Highlights)” ( = 108) to create an
album.
3
Configure background music
settings.
● Choose an item, press the [ ] button, and choose an option (
4
Save the album.
●
Follow step 4 in “Viewing Albums (Story
Highlights)” ( = 108) to save albums.
● Once albums are saved, background music cannot be added later. Background music in albums cannot be removed or changed.
● Chapters of albums with background music cannot be edited
(
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
109
● If you prefer not to add background music, set [Add BGM] to [No] on the screen in step 3.
● To use only background music instead of movie audio, set [Audio
Mixer] to [BGM only] on the screen in step 3.
● To listen to a sample of the background music selected in [Track], choose [Sample BGM] on the screen in step 3 and press the [ ] button.
Creating Your Own Albums
Still Images
Create your own albums by choosing desired images.
Movies
1
Choose to create a Custom album.
●
Following steps 1 – 3 in “Viewing Albums
(Story Highlights)” ( = 108), choose
[Custom] and press the [ ] button.
2
Choose a selection method.
● Choose [Image Selection], [Date
Selection], or [Person Selection], and then press the [ ] button.
3
Choose album elements.
● Once you select the elements for your album and press the [ ] button, your selected elements are labeled with [ ].
● Press the [ ] button after you finish selecting still images, short clips, or Creative Shot movies in [Image
Selection], dates in [Date Selection], or people in [Person Selection].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Preview], and then press the [ ] button.
4
Choose background music.
● When the screen at left is displayed, choose [Music Settings]. Add background music as described in “Adding
Background Music to Albums” ( = 109),
and then press the [ ] button.
5
Choose a color effect.
●
On the screen in step 4 of “Viewing
Albums (Story Highlights)” ( = 108),
choose [Change Color Effect].
● Press the [ ][ ] buttons to choose a color effect, and then press the [ ] button.
6
Save the album.
●
Follow step 4 in “Viewing Albums (Story
Highlights)” ( = 108) to save albums.
● You can specify up to 40 files (or 10 movie files) after choosing
[Image Selection]. The second time you create a custom album,
[Select images based on previous settings?] is displayed. To use previously selected images as the basis, choose [Yes]. The previous stills, clips, or Creative Shot movies are labeled with
[ ], and multiple images are displayed.
● Up to 15 dates can be selected if you choose [Date Selection].
● The color effect may not be applied to some images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
110
Combining Short Clips
Still Images Movies
Combine short clips to create a longer movie.
Note that movies created this way are not included in Story Highlights albums (
1
Access the editing screen.
● Press the [ ] button, choose
[Short Clip Mix] on the [ ] tab, and then choose [Merge Clips] (
2
Specify clips to combine.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a clip on the top of the screen to combine, and then press the
[ ] button.
● Your selected clip is displayed on the bottom of the screen.
● To cancel selection, press the [ ] button again.
● Repeat these steps to specify other clips to combine.
● After you are finished selecting clips, press the [ ] button.
3
Preview the movie.
● Choose [Preview] and press the [ ] button.
● After [Loading] is displayed for a few seconds, a preview of the combined clips is played.
4
Save the movie.
● Choose [Save], and then press the [ ] button.
● Once the movie is saved, [Saved] is displayed.
5
Play the movie.
● Choose [Play Back Movie] on the screen in step 1 to view a list of movies you have created.
● Choose the movie to play and press the
[ ] button.
● To play the selected clip, move the zoom lever toward [ ] on the screen in step 2.
● To rearrange clips, press the [ ] button on the screen in step 2, select a clip, press the [ ] button, press the [ ][ ] buttons or turn the [ ] dial, and then press the [ ] button again.
● To apply a color effect, choose [Change Color Effect] on the screen in step 3.
● To add background music, choose [Music Settings] on the screen
● The image quality of movies saved is [ ].
● Use a fully charged battery pack, if possible.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
111
Wireless Features
Send images wirelessly from the camera to a variety of compatible devices, and use the camera with Web services
●
Before using wireless features, be sure to read “Precautions for
Wireless Features (Wi-Fi, Bluetooth, or Others)” ( = 187).
Available Wireless Features
Using Wi-Fi Features
You can send and receive images and control the camera remotely by connecting it to these devices and services via Wi-Fi.
● Smartphones and Tablets
Send images to smartphones and tablet computers that have Wi-
Fi functions. Remote live view shooting is also possible from a smartphone or tablet.
For convenience in this guide, smartphones, tablets, and other compatible devices are collectively referred to as “smartphones”.
● Computer
Use software to save camera images to a computer connected via
Wi-Fi.
● Web Services
Add your account information to the camera for CANON iMAGE
GATEWAY online photography service or other Web services to send camera images to the services. Unsent images on the camera can also be sent to a computer or Web service via CANON iMAGE
GATEWAY.
● Printers
Send images wirelessly to a PictBridge-compatible printer (supporting
DPS over IP) to print them.
● Another Camera
Send images wirelessly between Wi-Fi-compatible Canon cameras.
Using Bluetooth
®
Features
You can easily pair the camera with a smartphone featuring Bluetooth low energy technology*. You can also shoot, view, or geotag images by using your smartphone as a remote control.
* Hereafter referred to as “Bluetooth”.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
112
Sending Images to a Smartphone
There are several ways to connect the camera to a smartphone and send images.
● Connect via Bluetooth
You can easily connect the camera to a Bluetooth enabled smartphone by pairing them. This simplifies transferring images to a smartphone.
●
Simply touch an NFC-compatible Android smartphone against the camera to connect the devices.
●
Connect via the Wi-Fi menu ( = 117)
You can connect the camera to a smartphone as you would connect it to a computer or other device. Multiple smartphones can be added.
Before connecting to the camera, you must install the free dedicated
Camera Connect app on the smartphone. For details on this application
(supported smartphones and included functions), refer to the Canon website.
● Canon Wi-Fi-compatible camera owners who use CameraWindow to connect their camera via Wi-Fi to a smartphone should consider switching to the Camera Connect mobile app.
Transferring Images to a Bluetooth Enabled
Smartphone
Once you have paired with a smartphone via Bluetooth, simply operate your smartphone to view and save camera images.
1
Install Camera Connect.
● For Android smartphones, find Camera
Connect in Google Play and download and install the app.
● For an iPhone or iPad, find Camera
Connect in the App Store and download and install the app.
2
Register a nickname.
● Press the power button.
● Press the [ ] button, choose
[Wireless settings] on the [ ] tab, and then choose [Nickname].
● Press the [ ] button to access the
keyboard ( = 30), and then enter a
nickname.
● To return to [Wireless settings] after
[ pressing the [ ] button, press the
] button again.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
113
3
Prepare for pairing.
● Choose [Bluetooth settings], press the
[ ][ ] buttons or turn the [ ] dial to choose [Pairing], and then press the [ ] button.
● A screen is displayed indicating that the camera is waiting to connect.
4
Start Camera Connect.
● Activate Bluetooth on the smartphone, and then start Camera Connect on the smartphone.
● After the camera is recognized, a camera selection screen is displayed.
5
Select the camera to connect to.
● Choose the camera nickname.
● Complete the pairing process for the smartphone.
6
Complete pairing.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK] after the confirmation message on the camera, and then press the [ ] button.
● Press the [ ] button when the screen at left is displayed.
7
Transfer images.
● The camera will automatically switch to
Wi-Fi if you choose [Images on camera] in Camera Connect.
● On an iPhone or iPad, in the device’s
Wi-Fi setting menu, choose the SSID
(network name) displayed on the camera to establish a connection.
● Use the smartphone to transfer images from the camera to the smartphone.
● To switch to Bluetooth, disable the Wi-Fi connection on the smartphone.
● Battery life may be shorter when you use the camera after pairing, because power is consumed even when the camera is off.
● Before bringing the camera to places where the use of electronic devices is restricted, set [Bluetooth] to [Off], to avoid having the camera ready for Bluetooth communication even when it is off.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
114
● Bluetooth connection status is indicated by one of the following icons.
[ ] Connected, [ ] Disconnected
● You can also use the camera to disable Wi-Fi connection described in step 7.
● To check the information of the smartphone connected via
Bluetooth in [Check/clear connection info], choose MENU
( = 29) > [ ] tab > [Wireless settings] > [Bluetooth settings].
Choose [Address check] to check the camera’s Bluetooth address.
Transferring Images to an NFC-Compatible
Smartphone
Use an Android smartphone’s NFC to simplify the process of installing
Camera Connect and connecting to the camera.
Operation when devices are initially connected via NFC varies depending on the camera mode when the devices are touched together.
● If the camera is off or in Shooting mode when the devices are touched together, you can choose and send images on the image selection screen. Once the devices are connected, you can also shoot remotely while viewing a shooting screen on the smartphone (
to reconnect to recent devices, which are listed in the Wi-Fi menu.
● If the camera is in Playback mode when the devices are touched together, you can choose and send images from the index display shown for image selection.
Follow the instructions in the following section for NFC-initiated connection to a camera that is off or in Shooting mode.
Connecting via NFC When Camera Is Off or in
Shooting Mode
1
Install Camera Connect.
● Refer to the smartphone user manual to check where the N-Mark ( ) is located.
● Activate NFC on the smartphone and touch the devices’ N-Marks ( ) together to start Google Play on the smartphone automatically. Once the Camera Connect download page is displayed, download and install the app.
2
Establish the connection.
● Make sure the camera is off or in
Shooting mode.
● Touch the N-Mark ( ) on the smartphone with Camera Connect installed against the camera’s N-Mark.
● The camera screen automatically changes.
● If the [Device Nickname] screen is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
● Camera Connect is started on the smartphone.
● The devices are connected automatically.
115
3
Adjust the privacy setting.
● When this screen is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [Yes], and then press the [ ] button.
● You can now use the smartphone for remote live view shooting, or to browse or transfer images on the camera.
4
Send an image.
● Press the [ ][ ][ ][ ] buttons to choose
[Send this image], and then press the [ ] button.
● [Transfer completed] is displayed after the image is sent, and the image transfer screen is displayed again.
● To end the connection, press the
[ ] button, choose [OK] on the confirmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button. You can also use the smartphone to end the connection.
● When using NFC, keep the following points in mind.
Avoid strong impact between the camera and smartphone. This may damage the devices.
Depending on the smartphone, the devices may not recognize each other immediately. In this case, try holding the devices together in slightly different positions. If connection is not established, keep the devices together until the camera screen is updated.
If you attempt connection when the camera is off, a message may be displayed on the smartphone reminding you to turn on the camera. If so, turn the camera on and touch the devices together again.
Do not place other objects between the camera and smartphone. Also, note that camera or smartphone covers or similar accessories may block communication.
● All images in the camera can be viewed from the connected smartphone when you choose [Yes] in step 3. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 3.
● Once you have registered a smartphone, you can change privacy settings for it on the camera (
● Connections require that a memory card be in the camera.
● You can also change the camera nickname on the screen in step
2 (
● You can also send multiple images at once and change the image size before sending (
● To disable NFC connections, choose MENU (
> [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
116
Connecting via NFC When Camera Is in Playback
Mode
● Press the [ ] button to turn the camera on.
● Touch the smartphone with Camera
Connect installed ( = 115) against the
camera’s N-Mark ( ).
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose an image to send, and then press the [ ] button. [ ] is displayed.
● To cancel selection, press the [ ] button again. [ ] is no longer displayed.
● Repeat this process to choose additional images.
● After you finish choosing images, press the [ ] button.
● Press the [ ][ ] buttons to choose [OK], and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Send], and then press the
[ ] button.
● The images are now sent.
● If during connection a message on the camera requests you to
enter the nickname, follow step 2 in “Transferring Images to an
NFC-Compatible Smartphone” ( = 115) to enter it.
● The camera does not keep a record of smartphones you connect to via NFC in Playback mode.
● You can preset images to transfer at your desired size (
Adding a Smartphone Using the Wi-Fi Menu
These steps show how to use the camera as an access point, but you can
also use an existing access point ( = 119).
1
Install Camera Connect.
● For Android smartphones, find Camera
Connect in Google Play and download and install the app.
● For an iPhone or iPad, find Camera
Connect in the App Store and download and install the app.
2
Access the Wi-Fi menu.
● Press the [ ] button.
● If the [Device Nickname] screen is displayed, choose [OK] (
3
Choose [ ].
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index 4
Choose [Add a Device].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add a Device], and then press the [ ] button.
117
● The camera SSID and password are displayed.
5
Connect the smartphone to the network.
● In the smartphone’s Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection.
● In the password field, enter the password displayed on the camera.
6
Start Camera Connect.
● Start Camera Connect on the smartphone.
7
Select the camera to connect to.
● On the camera selection screen displayed on the smartphone, choose the camera to begin pairing.
8
Adjust the privacy setting.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Yes], and then press the
[ ] button.
● You can now use the smartphone for remote live view shooting, or to browse or transfer images on the camera.
9
Send an image.
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Select], and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose an image to
[ send, press the [ ] button to mark it as selected ([ ]), and then press the
] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Send], and then press the
[ ] button.
● [Transfer completed] is displayed after the image is sent, and the image transfer screen is displayed again.
● To end the connection, press the
[ ] button, choose [OK] on the confirmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button. You can also use the smartphone to end the connection.
● To add multiple smartphones, repeat the above procedure starting from step 1.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
118
● All images in the camera can be viewed from the connected smartphone when you choose [Yes] in step 8. To keep camera images private, so that they cannot be viewed from the smartphone, choose [No] in step 8.
● Once you have registered a smartphone, you can change privacy
settings for it on the camera ( = 139).
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● To connect without entering a password in step 5, choose MENU
( = 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Password] > [Off]. [Password] is no longer displayed on the SSID screen (in step 4).
● You can also send multiple images at once and change the image size before sending (
● You can send the current image by choosing [Send this image] on the screen in step 9.
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu, you can also use an existing access point.
1
Prepare for the connection.
● Access the [Waiting to connect] screen
by following steps 1 – 4 in “Adding a
Smartphone Using the Wi-Fi Menu”
2
Connect the smartphone to the access point.
3
Choose [Switch Network].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Switch Network], and then press the [ ] button.
● A list of detected access points will be displayed.
4
Connect to an access point.
● For WPS-compatible access points, connect to the access point as described
in steps 5 – 8 in “Using WPS-Compatible
● For non-WPS access points, follow steps
2 – 4 in “Connecting to Listed Access
Points” ( = 124) to connect to the
access point.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
119
5
Select the camera to connect to.
● On the camera selection screen displayed on the smartphone, choose the camera to begin pairing.
6
Configure the privacy settings and
send images.
●
Follow steps 8 – 9 in “Adding a
Smartphone Using the Wi-Fi Menu”
( = 117) to configure the privacy
settings and send images.
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Adding a Smartphone Using the Wi-Fi Menu”
● To use the camera as an access point, choose [Switch Network] on the screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
● To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” ( = 119) from step 4.
Saving Images to a Computer
Preparing to Register a Computer
For details on computers that you can connect the camera to via Wi-
Fi, system requirements, and other compatibility information (including support in new operating systems), visit the Canon website.
● Windows 7 Starter and Home Basic editions are not supported.
● Windows 7 N (European version) and KN (South Korean version) require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website. http://go.microsoft.com/fwlink/?LinkId=159730
Installing CameraWindow
1
Download the software.
● Visit the following site from a computer connected to the Internet.
http://www.canon.com/icpd/
● Choose your country or region, and then follow the instructions displayed to prepare for downloading.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
120
2
Follow the instructions displayed.
● Double-click the downloaded file to install it.
● Internet access is required, and any ISP account charges and access fees must be paid separately.
● To uninstall the software, follow these steps.
Windows: Select [Start] menu > [All Programs] > [Canon
Utilities], and then choose the software for uninstallation.
Configuring the Computer for a Wi-Fi Connection
(Windows Only)
On a computer running Windows, configure the following settings before connecting the camera to the computer wirelessly.
1
Confirm that the computer is
connected to an access point.
● For instructions on checking your network connection, refer to the computer user manual.
2
Configure the setting.
● Click in the following order: [Start] menu
> [All Programs] > [Canon Utilities] >
[CameraWindow] > [Wi-Fi connection setup].
● In the application that opens, follow the on-screen instructions and configure the setting.
● The following Windows settings are configured when you run the utility in step 2.
Turn on media streaming.
This will enable the camera to see (find) the computer to access via Wi-Fi.
Turn on network discovery.
This will enable the computer to see (find) the camera.
Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other automatically.
● Some security software may prevent you from completing the settings as described here. Check the settings of your security software.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
121
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Confirming Access Point Compatibility
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Interface” ( = 183).
Connection methods vary depending on whether the access point supports Wi-Fi Protected Setup (WPS,
non-WPS access points, check the following information.
● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called the
“access point name” or “network name”.
● Network authentication / data encryption (encryption method / encryption mode)
The method for encrypting data during wireless transmission. Check which security setting is used: WPA2-PSK (AES), WPA2-PSK
(TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open system authentication), or no security.
● Password (encryption key / network key)
The key used when encrypting data during wireless transmission. Also called the “encryption key” or “network key”.
● Key index (transmit key)
The key set when WEP is used for network authentication / data encryption. Use “1” as the setting.
● If system administrator status is needed to adjust network settings, contact the system administrator for details.
● These settings are very important for network security. Exercise adequate caution when changing these settings.
● For information on WPS compatibility and for instructions on checking settings, refer to the access point user manual.
● A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
● This guide refers to all Wi-Fi routers and base stations as “access points”.
● If you use MAC address filtering on your Wi-Fi network, be sure to add the camera’s MAC address to your access point. You can
check your camera’s MAC address by choosing MENU ( = 29)
> [ ] tab > [Wireless settings] > [Wi-Fi Settings] > [Check MAC
Address].
Using WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN
Method for settings on a WPS supported device.
1
Confirm that the computer is
connected to an access point.
● For instructions on checking the connection, refer to the device and access point user manuals.
2
Access the Wi-Fi menu.
● Press the [ ] button.
● If the [Device Nickname] screen is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
122
3
Choose [ ].
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
4
Choose [Add a Device].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add a Device], and then press the [ ] button.
5
Choose [Connect with WPS].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Connect with WPS], and then press the [ ] button.
6
Choose [WPS (PBC mode)].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [WPS (PBC mode)], and then press the [ ] button.
7
Establish the connection.
● On the access point, hold down the WPS connection button for a few seconds.
● On the camera, press the [ ] button to go to the next step.
● The camera connects to the access point and lists devices connected to it on the
[Select a Device] screen.
8
Choose the target device.
● Choose the target device name (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
9
Install a driver (first Windows
connection only).
● When this screen is displayed on the camera, click the Start menu on the computer, click [Control Panel], and then click [Add a device].
● Double-click the connected camera icon.
● Driver installation will begin.
● After driver installation is complete, and the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
123
10
Display CameraWindow.
● Windows: Access CameraWindow by clicking [Downloads Images From Canon
Camera].
11
Import images.
● Click [Import Images from Camera], and then click [Import Untransferred Images].
● Images are now saved to the Pictures folder on the computer, in separate folders named by date.
● Click [OK] in the screen that is displayed after image import is complete.
● To view images you save to a computer, use preinstalled or commonly available software compatible with images captured by the camera.
● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
(
= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also change the camera nickname on the screen in step
2 (
● When the camera is connected to a computer, the camera screen is blank.
● To disconnect from the camera, turn off the camera.
● If you chose [WPS (PIN mode)] in step 6, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user manual included with your access point.
Connecting to Listed Access Points
1
View the listed access points.
● View the listed networks (access points)
as described in steps 1 – 4 of “Using
2
Choose an access point.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a network (access point), and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
124
3
Enter the access point password.
● Press the [ ] button to access the keyboard, and then enter the password
(
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Next], and then press the
[ ] button.
4
Choose [Auto].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Auto], and then press the
[ ] button.
● To save images to a connected computer, follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
● To determine the access point password, check on the access point itself or refer to the user manual.
● If no access points are detected even after you choose [Refresh] in step 2 to update the list, choose [Manual Settings] in step 2 to complete access point settings manually. Follow on-screen instructions and enter an SSID, security settings, and a password.
● When you use an access point that you have already connected to for connecting to another device, [*] is displayed for the password in step 3. To use the same password, choose [Next]
(either press the [ ][ ] buttons or turn the [ ] dial) and press the [ ] button.
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Using WPS-Compatible Access Points” ( = 122).
● To connect to a device via an access point, confirm that the target device is already connected to the access point, and then follow the
procedure from step 8 in “Using WPS-Compatible Access Points”
● To switch access points, choose [Switch Network] on the screen displayed when you establish a connection, and then either follow
the procedure in “Using WPS-Compatible Access Points” ( = 122)
from step 5 or the procedure in “Connecting to Listed Access Points”
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
125
Sending Images to a Registered
Web Service
Registering Web Services
Use a smartphone or computer to add to the camera Web services that you want to use.
● A smartphone or computer with a browser and Internet connection is required to complete camera settings for CANON iMAGE GATEWAY and other Web services.
● Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and version information.
● For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.
com/cig/).
● You must have an account with Web services other than CANON iMAGE GATEWAY if you desire to use them. For further details, check the websites for each Web service you want to register.
● Separate ISP connection and access point fees may be applicable.
● CANON iMAGE GATEWAY also provides user guides for downloading.
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. Note that you will need to enter an email address used on your computer or smartphone to receive a notification message for completing linkage settings.
1
Access the Wi-Fi menu.
● Press the [ ] button.
● If the [Device Nickname] screen is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
3
Accept the agreement to enter an email address.
● Read the agreement displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [I Agree], and then press the [ ] button.
126
4
Establish a connection with an access point.
● Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” ( = 122) or in steps 2 – 4
in “Connecting to Listed Access Points”
5
Enter your email address.
● Once the camera is connected to CANON iMAGE GATEWAY via the access point, a screen is displayed for entering an email address.
● Enter your email address, press the
[ ][ ] buttons or turn the [ ] dial to choose [Next], and then press the [ ] button.
6
Enter a four-digit number.
● Enter a four-digit number of your choice, press the [ ][ ] buttons or turn the [ ] dial to choose [Next], and then press the
[ ] button.
● You will need this four-digit number later when setting up linkage with CANON iMAGE GATEWAY in step 8.
7
Check for the notification message.
● Once information has been sent to
CANON iMAGE GATEWAY, you will receive a notification message at the email address entered in step 5.
● Press the [ ] button on the next screen, which indicates that notification has been sent.
● [ ] now changes to [ ].
8
Access the page in the notification
message and complete camera link settings.
● From a computer or smartphone, access the page linked in the notification message.
● Follow the instructions to complete the settings on the camera link settings page.
9
Complete CANON iMAGE GATEWAY settings on the camera.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
● [ ] (
GATEWAY are now added as destinations.
● You can add other Web services, as needed. In this case, follow the
instructions from step 2 in “Registering
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
127
● Make sure initially that your computer or smartphone mail application is not configured to block email from relevant domains, which may prevent you from receiving the notification message.
● You can also change the camera nickname on the screen in step
● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the menu. Press the [ ][ ] buttons to access the device selection screen and then configure the setting.
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the camera.
1
Log in to CANON iMAGE GATEWAY and access the camera link settings page.
● From a computer or smartphone, access http://www.canon.com/cig/ to visit
CANON iMAGE GATEWAY.
2
Configure the Web service you want
to use.
● On the computer or smartphone, display the Web service settings screen.
● Follow the on-screen instructions to complete settings for Web services you want to use.
3
Choose [ ].
● Press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
● The Web service settings are now updated.
● If any configured settings change, follow these steps again to update the camera settings.
Uploading Images to Web Services
1
Access the Wi-Fi menu.
● Press the [ ] button.
2
Choose the destination.
● Choose the icon of the Web service to connect to (either press the [ ][ ][ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● If multiple recipients or sharing options are used with a Web service, choose the desired item on the [Select Recipient] screen (either press the [ ][ ] buttons or turn the [ ] dial), and then press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
128
3
Send an image.
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Select], and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose an image to
[ send, press the [ ] button to mark it as selected ([ ]), and then press the
] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Send], and then press the
[ ] button.
● When uploading to YouTube, read the terms of service, choose [I Agree], and press the [ ] button.
● Press the [ ] button to return to the playback screen once [OK] is displayed after the image is sent.
● Connections require that a memory card with saved images be in the camera.
● You can also send multiple images at once, resize images, and
add comments before sending ( = 132).
● You can send the current image by choosing [Send this image] on the screen in step 3.
● To view images uploaded to CANON iMAGE GATEWAY on a smartphone, try the dedicated Canon Online Photo Album app.
Download and install the Canon Online Photo Album app for iPhones or iPads from the App Store or for Android devices from
Google Play.
Printing Images Wirelessly from a
Connected Printer
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can
also use an existing access point ( = 119).
1
Access the Wi-Fi menu.
● Press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
3
Choose [Add a Device].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add a Device], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
● The camera SSID and password are displayed.
129
4
Connect the printer to the network.
● In the printer’s Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection.
● In the password field, enter the password displayed on the camera.
5
Choose the printer.
● Choose the printer name (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
6
Choose an image to print.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image.
● Press the [ ] button, choose [ ], and press the [ ] button again.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Print], and then press the
[ ] button.
● For detailed printing instructions, see
● To end the connection, press the [ ] button, choose [OK] on the confirmation screen (either press the [ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
● Connections require that a memory card with saved images be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
(
= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● To connect without entering a password in step 4, choose MENU
(
= 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Password] > [Off]. [Password] is no longer displayed on the SSID screen (in step 3).
●
To use another access point, follow steps 3 – 4 in “Using Another
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
130
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as follows.
● Only Wi-Fi compatible Canon cameras can be connected via Wi-Fi.
You cannot connect to a Canon camera unless it is Wi-Fi compatible, even if it supports FlashAir/Eye-Fi cards.
1
Access the Wi-Fi menu.
● Press the [ ] button.
2
Choose [ ].
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose [ ], and then press the [ ] button.
3
Choose [Add a Device].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Add a Device], and then press the [ ] button.
● Follow steps 1 – 3 on the target camera too.
● Camera connection information will be added when [Start connection on target camera] is displayed on both camera screens.
4
Send an image.
● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Select], and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose an image to
[ send, press the [ ] button to mark it as selected ([ ]), and then press the
] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Send], and then press the
[ ] button.
● [Transfer completed] is displayed after the image is sent, and the image transfer screen is displayed again.
● To end the connection, press the
[ ] button, choose [OK] on the confirmation screen (either press the
[ ][ ] buttons or turn the [ ] dial), and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
131
● Connections require that a memory card be in the camera.
● Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to choose the device and then pressing the [ ] button. To add a new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
● If you prefer not to display recent target devices, choose MENU
( = 29) > [ ] tab > [Wireless settings] > [Wi-Fi Settings] >
[Target History] > [Off].
● You can also send multiple images at once and change the image size before sending (
● You can send the current image by choosing [Send this image] on the screen in step 4.
Image Sending Options
You can choose multiple images to send at once and change the image recording pixel setting (size) before sending. Some Web services also enable you to annotate the images you send.
Sending Multiple Images
On the image transfer screen, specify a range of images to send, or send only images tagged as favorites.
1
Choose [Select and send].
● On the image transfer screen, press the
[ ][ ] buttons to choose [Select and send], and then press the [ ] button.
2
Choose a selection method.
● Press the [ ][ ] buttons or turn the [ ] dial to choose a selection method.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
132
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Sending Multiple
Images” (
Range] and press the [ ] button.
2
Choose images.
● Follow steps 2 – 3 in “Selecting a Range”
(
● To include movies, press the
[ ][ ][ ][ ] buttons to choose [Incl.
Movies], and then press the [ ] button to mark the option as selected ( ).
● Press the [ ][ ][ ][ ] buttons to choose
[OK], and then press the [ ] button.
3
Send the images.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Send], and then press the
[ ] button.
Sending Favorite Images
Send only images tagged as favorites ( = 101).
1
Choose [Favorite Images].
● Following step 2 in “Sending Multiple
Images” (
Images] and press the [ ] button.
● An image selection screen for favorites is displayed. If you prefer not to include an image, choose the image and press the
[ ] button to remove [ ].
● Press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
2
Send the images.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Send], and then press the
[ ] button.
● In step 1, [Favorite Images] is not available unless you have tagged images as favorites.
Notes on Sending Images
● Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level.
● Web services may limit the number of images or length of movies you can send.
● For movies that you do not compress (
compressed file is sent instead of the original file. Note that this may delay transmission, and the file cannot be sent unless there is enough space for it on the memory card.
● When sending movies to smartphones, note that the supported image quality varies depending on the smartphone. For details, refer to the smartphone user manual.
● On the screen, wireless signal strength is indicated by the following icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
● Sending images to Web services will take less time when resending images you have already sent that are still on the CANON iMAGE
GATEWAY server.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
133
Choosing the Number of Recording Pixels (Image
Size)
On the image transfer screen, choose [ ] by pressing the [ ][ ] buttons, and then press the [ ] button. On the screen displayed, choose the recording pixel setting (image size) by pressing the [ ][ ] buttons, and then press the [ ] button.
● To send images at original size, select [No] as the resizing option.
● Choosing [ ] will resize images that are larger than the selected size before sending.
● Movies cannot be resized.
● Image size can also be configured in MENU (
> [Wireless settings] > [Wi-Fi Settings] > [Resize for Sending].
Adding Comments
Using the camera, you can add comments to images that you send to e-mail addresses, social networking services, etc. The number of characters and symbols that can be entered may differ depending on the Web service.
1
Access the screen for adding comments.
● On the image transfer screen, choose
[ ] by pressing the [ ][ ][ ][ ] buttons, and then press the [ ] button.
2
Add a comment (
30).
3
Send the image.
● When a comment is not entered, the comment set in CANON iMAGE GATEWAY is automatically sent.
● You can also annotate multiple images before sending them. The same comment is added to all images sent together.
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Preparing the Camera
Register [ ] as the destination. On the destination computer, you will install and configure Image Transfer Utility, free software compatible with
Image Sync.
1
Add [ ] as a destination.
● Add [ ] as a destination, as described in
“Registering CANON iMAGE GATEWAY”
● To include a Web service as the destination, log in to CANON iMAGE
GATEWAY ( = 126), select your camera
model, access the Web service settings screen, and choose the destination
Web service in Image Sync settings.
For details, refer to CANON iMAGE
GATEWAY Help.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
134
2
Choose the type of images to send
(only when sending movies with images).
● Press the [ ] button, choose
[Wireless settings] on the [ ] tab, and then choose [Wi-Fi Settings] (
● Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][ ] buttons to choose [Stills/Movies].
Preparing the Computer
Install and configure the software on the destination computer.
1
Install Image Transfer Utility.
● Install Image Transfer Utility on a computer connected to the Internet
(
= 155) by following steps 1 – 2 of
“Installing CameraWindow” ( = 120).
● Image Transfer Utility can also be downloaded from the Image Sync settings page of CANON iMAGE
GATEWAY (
2
Register the camera.
● Windows: In the taskbar, right-click [ ], and then click [Add new camera].
● Mac OS: In the menu bar, click [ ], and then click [Add new camera].
● A list of cameras linked to CANON iMAGE GATEWAY is displayed. Choose the camera from which images are to be sent.
● Once the camera is registered and the computer is ready to receive images, the icon changes to [ ].
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer and save the images.
1
Send images.
●
Follow steps 1 – 2 in “Uploading Images to Web Services” ( = 128) and choose
[ ].
● Sent images are labeled with a [ ] icon.
2
Save the images to the computer.
● Images are automatically saved to the computer when you turn it on.
● Images are automatically sent to Web services from the CANON iMAGE
GATEWAY server, even if the computer is off.
● When sending images, you should use a fully charged battery pack.
● Even if images were imported to the computer through a different method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
● Sending is faster when the destination is a computer on the same network as the camera, because images are sent via the access point instead of CANON iMAGE GATEWAY. Note that images stored on the computer are sent to CANON iMAGE GATEWAY, so the computer must be connected to the Internet.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
135
Viewing Images Sent via Image Sync on a
Smartphone
By installing the Canon Online Photo Album (Canon OPA) app, you can use your smartphone to view and download images sent via Image Sync while they are stored temporarily on the CANON iMAGE GATEWAY server.
In preparation, enable smartphone access as follows.
●
Make sure you have completed the settings described in “Preparing the Computer” ( = 135).
● Download and install the Canon Online Photo Album app for iPhones or iPads from the App Store or for Android devices from Google Play.
●
Log in to CANON iMAGE GATEWAY ( = 126), select your camera
model, access the Web service settings screen, and enable viewing and downloading from a smartphone in the Image Sync settings. For details, refer to CANON iMAGE GATEWAY Help.
● Once images stored temporarily on the CANON iMAGE
GATEWAY server have been deleted, they can no longer be viewed.
● Images you sent before enabling smartphone viewing and downloading in Image Sync settings cannot be accessed this way.
● For Canon Online Photo Album instructions, refer to Canon
Online Photo Album Help.
Using a Smartphone to View Camera
Images and Control the Camera
You can do the following with the dedicated smartphone app Camera
Connect.
● Browse images on the camera and save them to the smartphone
● Geotag images as you shoot (
●
Control the camera remotely from a smartphone ( = 138)
● Privacy settings must be configured in advance to allow image viewing on the smartphone (
Geotagging Images When You Shoot
Still images and movies you shoot can be geotagged using GPS information (such as latitude, longitude, and elevation) from a Bluetooth enabled smartphone. You can review the recorded GPS information on the camera (
the locations on a map, with the still images and movies shown next to them.
1
Connect the camera and smartphone via Bluetooth (
113).
2
Choose [GPS settings].
● Press the [ ] button, choose [GPS settings] on the [ ] tab, and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
136
3
Configure the setting.
● Choose [GPS via Mobile], and then press the [ ][ ] buttons or turn the [ ] dial to choose [Enable].
4
Shoot.
● The still images and movies you shoot are now geotagged using smartphone
GPS information, which you can check as
described in “GPS Information Display”
● Next time, after starting Camera Connect on your smartphone, make sure the camera and smartphone are connected via Bluetooth before shooting.
● Images are not geotagged this way unless Camera Connect is running.
● The GPS information added to your movie is acquired initially, when you start shooting.
● GPS information cannot be updated unless Wi-Fi is off.
● The GPS information added to images in remote live view shooting is acquired initially, when you switch to a Wi-Fi connection.
● Images may not be geotagged if you connect via NFC or
Bluetooth when the camera is off.
● Others may be able to locate or identify you by using location data in your geotagged still images or movies. Be careful when sharing these images with others, as when posting images online where many others can view them.
● To check the GPS information acquired from the smartphone,
choose MENU ( = 29) > [ ] tab > [GPS settings] > [GPS
information display].
● GPS acquisition status is indicated by one of the following icons.
[ ] Acquiring, [ ] Not acquiring
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
137
Controlling the Camera Remotely from a
Smartphone
Controlling the Camera via Wi-Fi
You can shoot as you view a shooting screen on your smartphone.
● Privacy settings must be configured in advance to allow viewing
of all images from the smartphone ( = 117).
1
Secure the camera.
● Keep the camera still by mounting it on a tripod or taking other measures.
2
Connect the camera and
smartphone (
117).
● In the privacy settings, choose [Yes].
3
Choose remote live view shooting.
● In Camera Connect on the smartphone, choose [Remote live view shooting].
● Once the camera is ready for remote live view shooting, a live image from the camera is displayed on the smartphone.
● At this time, a message is displayed on the camera, and all operations except pressing the power button are disabled.
4
Shoot.
● Use the smartphone to shoot.
● Movie shooting is not available.
● Focusing may take longer.
● Image display or shutter release may be delayed, depending on the connection status.
● Any rough subject motion shown on the smartphone due to the connection environment will not affect recorded images.
● Captured images are not transferred to the smartphone. Use the smartphone to browse and transfer images from the camera.
Controlling the Camera via Bluetooth
You can use a Bluetooth enabled smartphone for remote shooting and switching of image display.
This is convenient if you want to connect quickly while shooting, or if you will control playback while connected to a TV.
1
Prepare the camera.
● Set the shooting mode and the shooting functions on the camera.
● Keep the camera still by mounting it on a tripod or taking other measures when shooting.
2
Connect the camera and
smartphone (
113).
● Make sure that the Bluetooth connection has been established.
3
Choose Bluetooth remote controller.
● In Camera Connect on the smartphone, choose [Bluetooth remote controller].
● The smartphone screen changes to a screen for remote control via Bluetooth.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
138
4
Shoot and switch images.
● Use the smartphone to shoot in Shooting mode and switch images in Playback mode.
● [Bluetooth remote controller] is not available when connected via
Wi-Fi.
● You can check the Bluetooth connection status by referring to the icon on the screen (
Editing or Erasing Wi-Fi Settings
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1
Access the Wi-Fi menu and choose a device to edit.
● Press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose the icon of a device to edit, and then press the [ ] button.
2
Choose [Edit a Device].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Edit a Device], and then press the [ ] button.
3
Choose the device to edit.
● Press the [ ][ ] buttons or turn the [ ] dial to choose the device to edit, and then press the [ ] button.
4
Choose the item to edit.
● Press the [ ][ ] buttons or turn the [ ] dial to choose the item to edit, and then press the [ ] button.
● The items you can change depend on the device or service.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
139
Connection
Configurable Items
[Change Device Nickname]
[View Settings] (
[Erase Connection Info] (
O : Configurable – : Not configurable
O
–
O
O
O
O
O
–
O
O
–
O
Web
Services
–
–
–
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on the camera.
●
Following step 4 in “Editing Connection
Information” ( = 139), choose [Change
Device Nickname] and press the [ ] button.
● Select the input field and press the [ ] button. Use the keyboard displayed to
Erasing Connection Information
Erase connection information (information about devices that you have connected to) as follows.
●
Following step 4 in “Editing Connection
Information” ( = 139), choose [Erase
Connection Info] and press the [ ] button.
● After [Erase?] is displayed, press the
[ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
● The connection information will be erased.
Specifying Images Viewable from Smartphones
Specify whether all images on the camera’s memory card can be viewed from smartphones connected to the camera.
● Choose [View Settings] in step 4 of “Editing Connection Information”
( = 139) and choose the desired option.
● For remote live view shooting, choose [On].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
140
Changing the Camera Nickname
Change the camera nickname (displayed on connected devices) as desired.
1
Choose [Wireless settings].
● Press the [ ] button and choose
[Wireless settings] on the [ ] tab
(
2
Choose [Nickname].
● Press the [ ][ ] buttons or turn the
[ ] dial to choose [Nickname], and then press the [ ] button (
3
Change the nickname.
● Press the [ ] button to access the
keyboard ( = 30), and then enter a
nickname.
● A message is displayed if the nickname you enter begins with a symbol or space. Press the [ ] button and enter a different nickname.
● You can also change the nickname from the [Device Nickname] screen displayed when you first use Wi-Fi. In this case, select the text box, press the [ ] button to access the keyboard, and then enter a new nickname.
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it.
Resetting the Wi-Fi settings will also clear all Web service settings. Be sure that you want to reset all Wi-Fi settings before using this option.
1
Choose [Wireless settings].
● Press the [ ] button and choose
[Wireless settings] on the [ ] tab
2
Choose [Reset Settings].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Reset Settings], and then press the [ ] button.
3
Restore the default settings.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● The Wi-Fi settings are now reset.
● To reset other settings (aside from Wi-Fi) to defaults, choose
[Reset camera] on the [ ] tab (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
141
Clearing Information of Devices
Paired via Bluetooth
Before pairing with a different smartphone, clear the information about any connected smartphones.
1
Choose [Bluetooth settings].
● Press the [ ] button and choose
[ ] tab > [Wireless settings] > [Bluetooth settings].
2
Choose [Check/clear connection info].
● Choose [Check/clear connection info], and then press the [ ] button.
3
Clear the information.
● On the [Check/clear connection info] screen, press the [ ] button.
● After [Clear information about devices you have connected to] is displayed, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
4
Clear the camera information.
● In the Bluetooth setting menu on the smartphone, clear the camera information registered on the smartphone.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
142
Setting Menu
Customize or adjust basic camera functions for greater convenience
Adjusting Basic Camera Functions
Basic camera functions are configured on the [ ] tab of the MENU
( = 29). Customize commonly used functions as desired, for greater
convenience.
Silencing Camera Operations
Silence camera sounds and movies as follows.
● Choose [Mute], and then choose
[Enable].
● Operation can also be silenced by holding down the [ button as you turn the camera on.
]
●
Sound is not played during movies ( = 87) if you mute camera
sounds. To restore sound during movies, press the [ ] button.
Adjust volume with the [ ][ ] buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
● Choose [Volume], and then press the [ ] button.
● Choose an item, and then press the
[ ][ ] buttons to adjust the volume.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
143
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. ( = 28) or
MENU (
= 29) items. If you prefer, you can deactivate this information.
● Choose [Hints & Tips], and then choose
[Off].
Date and Time
Adjust the date and time as follows.
● Choose [Date/Time], and then press the
[ ] button.
● Press the [ ][ ] buttons to choose an item, and then adjust the setting, either by pressing the [ ][ ] buttons or turning the [ ] dial.
World Clock
To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” ( = 19).
1
Specify your destination.
● Choose [Time Zone], and then press the
[ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [ World], and then press the [ ] button.
● Press the [ ][ ] buttons to choose the destination.
● To set daylight saving time (1 hour ahead), choose [ ] by pressing the
[ ][ ] buttons or turning the [ ] dial, and then choose [ ] by pressing the
[ ][ ] buttons.
● Press the [ ] button.
2
Switch to the destination time zone.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [ World], and then press the [ ] button.
● [ ] is now shown on the shooting screen
● Adjusting the date or time while in [ ] mode (
automatically update your [ Home] time and date.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
144
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press the [ ] button in Shooting mode (
= 25). To have the lens retracted
immediately after you press the [ ] button, set the retraction timing to [0 sec.].
● Choose [Lens Retraction], and then choose [0 sec.].
Using Eco Mode
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce battery consumption.
1
Configure the setting.
● Choose [Eco Mode], and then choose [On].
● [ ] is now shown on the shooting screen (
● The screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off.
The camera turns off after approximately three minutes of inactivity.
2
Shoot.
● To activate the screen and prepare for shooting when the screen is off but the lens is still out, press the shutter button halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto
Power Down and Display Off, respectively) as needed ( = 26).
● Choose [Power Saving], and then press the [ ] button.
● After choosing an item, press the [ ][ ] buttons to adjust it as needed.
● To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
● The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
● These power-saving functions are not available when you have set Eco mode (
Screen Brightness
Adjust screen brightness as follows.
● Choose [Disp. Brightness], and then press the [ ][ ] buttons to adjust the brightness.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
145
● For maximum brightness, press and hold the [ ] button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [Disp. Brightness] setting on the [ ] tab.) To restore the original brightness, press and hold the [ ] button again for at least one second or restart the camera.
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally shown when you turn the camera on.
● Choose [Start-up Image], and then choose [Off].
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up.
1
Access the [Format] screen.
● Choose [Format], and then press the [ ] button.
2
Choose [OK].
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
3
Format the memory card.
● To begin the formatting process, press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the [ ] button.
● When formatting is finished, [Memory card formatting complete] is displayed.
Press the [ ] button.
● Formatting or erasing data on a memory card only changes file management information on the card and does not erase the data completely. When transferring or disposing of memory cards, take steps to protect personal information if necessary, as by physically destroying cards.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
146
● The total card capacity indicated on the formatting screen may be less than the advertised capacity.
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is displayed, the camera is not working correctly, card image reading/writing is slower, continuous shooting is slower, or movie recording suddenly stops. Low-level formatting erases all data on a memory card. Before lowlevel formatting, copy images on the memory card to a computer, or take other steps to back them up.
● On the screen in step 2 of “Formatting
Memory Cards” ( = 146), press the
[ ][ ] buttons or turn the [ ] dial to choose [Low Level Format], and then press the [ ][ ] buttons to select this option. A [ ] icon is displayed.
● Follow steps 2 – 3 in “Formatting Memory
Cards” (
formatting process.
●
Low-level formatting takes longer than “Formatting Memory
Cards” ( = 146), because data is erased from all storage regions
of the memory card.
● You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card can be used normally.
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each. You can change how the camera assigns file numbers.
● Choose [File Numbering], and then choose the desired option.
Continuous
Auto Reset
Images are numbered consecutively (until the 9999th shot is taken/saved) even if you switch memory cards.
Image numbering is reset to 0001 if you switch memory cards, or when a new folder is created.
● Regardless of the option selected in this setting, shots may be numbered consecutively after the last number of existing images on newly inserted memory cards. To start saving shots from 0001, use an empty (or formatted,
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
147
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day.
● Choose [Create Folder], and then choose
[Daily].
● Images will now be saved in folders created on the shooting date.
Metric / Non-Metric Display
Change the unit of measurement shown in the zoom bar (
MF indicator ( = 75), and elsewhere from m/cm to ft/in as needed.
● Choose [Units], and then choose [ft/in].
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body.
● Choose [Certification Logo Display], and then press the [ ] button.
Display Language
Change the display language as needed.
● Choose [Language ], and then press the [ ] button.
● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose a language, and then press the [ ] button.
● You can also access the [Language] screen in Playback mode by pressing and holding the [ ] button and immediately pressing the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
148
Adjusting Other Settings
The following settings can also be adjusted on the [ ] tab.
● [Video System] (
● [Wireless settings] (
●
Restoring Default Camera Settings
If you accidentally change a setting, you can restore default camera settings.
Restoring All Camera Defaults
1
Access the [Basic settings] screen.
● Choose [Reset camera] on the [ ] tab, and then press the [ ] button.
● Choose [Basic settings], and then press the [ ] button.
2
Restore default settings.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● All camera defaults are now restored.
● The following functions are not restored to default settings.
-
Information registered using Face ID ( = 45)
[ ] tab settings [Date/Time] (
[Language ] ( = 148), and [Video System] (
Custom white balance data you have recorded (
Shooting mode chosen in [
Movie mode (
] (
Information registered in [Wireless settings] (
Restoring Defaults for Individual Functions
Settings for the following functions can be restored to defaults individually.
● Face ID information
● Wireless settings
1
Access the [Other settings] screen.
● Choose [Reset camera] on the [ ] tab, and then press the [ ] button.
● Choose [Other settings] and press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
2
Choose the function to reset.
● Choose the function to reset, and then press the [ ] button.
3
Restore default settings.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
● Default function settings are now restored.
149
Accessories
Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately
System Map
Included Accessories
Wrist Strap
Battery Pack
NB-13L* 1
Battery Charger
CB-2LH/CB-2LHE* 1
USB Cable (camera end: Micro-B)*
2
Memory Card Card Reader Computer
HDMI Cable
(camera end: Type D) *
3
TV/Video
System
PictBridge-Compatible Printers
Power
Connect Station
CS100
Compact Power
Adapter
CA-DC30/
CA-DC30E
*1 Also available for purchase separately.
*2 A genuine Canon accessory is also available (Interface Cable IFC-600PCU).
*3 Use a commercially available cable no longer than 2.5 m (8.2 ft.).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
150
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that any repairs your Canon product may require as a result of such malfunction are not covered under warranty and will incur a fee.
Optional Accessories
The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available.
Power Supplies
Battery Pack NB-13L
● Rechargeable lithium-ion battery
Battery Charger CB-2LH/CB-2LHE
● Charger for Battery Pack NB-13L
● The battery charger can be used in areas with 100 – 240 V AC power (50/60 Hz).
● For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
● The message [Battery communication error] is displayed if you use a non-genuine Canon battery pack, and user response is required. Note that Canon shall not be liable for any damages resulting from accidents, such as malfunction or fire, that occur due to use of non-genuine Canon battery packs.
● The battery pack includes a convenient cover which you can attach to know the charge status at a glance. Attach the cover so that is visible on a charged battery pack, and attach it so that
is not visible on an uncharged battery pack.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
151
Other Accessories
Compact Power Adapter
CA-DC30/CA-DC30E
● Insert the included battery pack into the camera for charging. Interface Cable IFC-
600PCU (sold separately) is required to connect the adapter to the camera.
Interface Cable IFC-600PCU
● For connecting the camera to a computer or printer.
Printers
Canon-Brand PictBridge-Compatible
Printers
● Even without using a computer, you can print images by connecting the camera directly to a printer.
For details, visit your nearest Canon retailer.
Photo and Movie Storage
Connect Station CS100
● A media hub for storing camera images, viewing on a connected TV, printing wirelessly on a Wi-Fi-compatible printer, sharing over the Internet, and more.
Using Optional Accessories
Still Images Movies
Playback on a TV
Still Images Movies
By connecting the camera to a TV, you can view your shots on the larger screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
● Some information may not be displayed when viewing images on a TV (
Playback on a High-Definition TV
Still Images Movies
You can view your shots on a TV by connecting the camera to an HDTV with a commercially available HDMI cable (not exceeding 2.5 m / 8.2 ft., with a Type D terminal on the camera end). Movies shot at an image quality of [ ], [ ], or [ ] can be viewed in high definition.
1
Make sure the camera and TV are off.
2
Connect the camera to the TV.
● On the TV, insert the cable plug fully into the HDMI input as shown.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
152
● On the camera, open the terminal cover and insert the cable plug fully into the camera terminal.
3
Turn the TV on and switch to external input.
● Switch the TV input to the external input you connected the cable to in step 2.
4
Turn the camera on.
● Press the [ ] button to turn the camera on.
● Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.)
● When finished, turn off the camera and
TV before disconnecting the cable.
● Camera operating sounds are not played while the camera is connected to an HDTV.
Inserting and Charging the Battery
Pack
Charge the battery pack by using the supplied battery pack with an optional Compact Power Adapter CA-DC30/CA-DC30E and Interface
Cable IFC-600PCU.
(1)
(2)
1
Insert the battery pack.
● Follow step 1 in “Inserting the Battery
Pack and Your Memory Card” (
to open the cover.
● Insert the battery pack as described in step 2 of “Inserting the Battery Pack and
Your Memory Card” (
● Follow step 4 in “Inserting the Battery
Pack and Your Memory Card” (
to close the cover.
2
Connect the compact power adapter to the camera.
● With the camera turned off, open the cover (1). Hold the smaller plug of the interface cable (sold separately) facing as shown and insert the plug fully into the camera terminal (2).
● Insert the larger plug of the interface cable into the compact power adapter.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
153
3
Charge the battery pack.
● CA-DC30: Flip out the plug (1) and plug the compact power adapter into a power outlet (2).
● CA-DC30E: Plug the power cord into the compact power adapter, then plug the other end into a power outlet.
● Charging begins and the USB charge lamp lights up.
● The lamp turns off when charging finishes.
● Remove the compact power adapter from the power outlet and the interface cable from the camera.
● To protect the battery pack and keep it in optimal condition, do not charge it continuously for more than 24 hours.
● When charging another battery pack, always disconnect the interface cable from the camera before replacing the battery pack for charging.
● For details on charging time and the number of shots and recording time possible with a fully charged battery pack, see
● You can view images even while the battery is charging, by
turning the camera on and entering Playback mode ( = 23).
However, you cannot shoot while the battery is charging.
● If the USB charge lamp is not lit, reconnect the interface cable.
● Charged battery packs gradually lose their charge, even when they are not used. Charge the battery pack on (or immediately before) the day of use.
● The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery pack.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
154
Using a Computer to Charge the Battery
You can also charge the battery pack by inserting the larger plug of the interface cable into a computer’s USB terminal in step 2 of “Inserting and
Charging the Battery Pack” ( = 153). For details about USB connections
on the computer, refer to the computer user manual. We recommend using Interface Cable IFC-600PCU (sold separately).
● With the camera turned off, open the cover. With the smaller plug of the cable in the orientation shown, insert the plug fully into the camera terminal.
● Connect the larger cable plug to the computer. For details on computer connections, refer to the computer user manual.
● Charging now begins, and the indicator on the back of the camera blinks in green. Charging will be finished in about four hours.
● However, charging may take longer if you import images on the camera to
the computer, as described in “Saving
Images to a Computer” ( = 156).
● The indicator continues to blink in green even after charging is finished, as long as the camera is connected to the computer.
● Charging stops and the indicator goes off if, after you begin charging as described above, you press the power button to turn the camera off.
● With some computers, battery charging may require the memory card to be in the camera. Insert the memory card in the camera
( = 18) before connecting the cable to the computer’s USB port.
Using the Software
To utilize the features of the following software, download the software from the Canon website and install it on your computer.
● CameraWindow
Import images to your computer
● Image Transfer Utility
-
Set up Image Sync ( = 134) and receive images
● Map Utility
Use a map to view GPS information that has been added to images
● To view and edit images on a computer, use preinstalled or commonly available software compatible with images captured by the camera.
● Image Transfer Utility can also be downloaded from the Image
Sync settings page of CANON iMAGE GATEWAY.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
155
Computer Connections via a Cable
Checking Your Computer Environment
For detailed software system requirements and compatibility information
(including support in new operating systems), visit the Canon website.
Installing the Software
Install the software as described in steps 1 – 2 of “Installing
● To uninstall (remove) the software in Mac OS, in the [Canon
Utilities] folder within the [Applications] folder, drag the folder of the software for uninstallation to the Trash, and then empty the
Trash.
Saving Images to a Computer
Using a USB cable (sold separately; camera end: Micro-B), you can connect the camera to the computer and save images to the computer.
(1)
(2)
1
Connect the camera to the computer.
● With the camera turned off, open the cover (1). With the smaller plug of the
USB cable in the orientation shown, insert the plug fully into the camera terminal (2).
● Connect the larger cable plug to the computer. For details on computer connections, refer to the computer user manual.
● The camera automatically turns on when you connect it to the computer.
2
Display CameraWindow.
● Mac OS: CameraWindow is displayed when a connection is established between the camera and computer.
● Windows: Follow the steps introduced below.
● In the screen that is displayed, click the change program link of [ ].
● Choose [Downloads Images From Canon
Camera] and then click [OK].
● Double-click [ ].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
156
3
Save the images to the computer.
● Click [Import Images from Camera], and then click [Import Untransferred Images].
● Images are now saved to the Pictures folder on the computer, in separate folders named by date.
● After images are saved, close
CameraWindow, press the [ ] button to turn the camera off, and unplug the cable.
● To view images you save to a computer, use preinstalled or commonly available software compatible with images captured by the camera.
● Windows 7: If the screen in step 2 is not displayed, click the [ ] icon in the taskbar.
● Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
● Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply.
It may take a few minutes after you connect the camera to the computer until camera images are accessible.
Images shot in vertical orientation may be saved in horizontal orientation.
Image protection settings may be cleared from images saved to a computer.
Some problems may occur when saving images or image information, depending on the operating system version, the software in use, or image file sizes.
Printing Images
Still Images Movies
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Easy Print
Still Images Movies
Print your shots by connecting the camera to a PictBridge-compatible printer with a USB cable (sold separately; camera end: Micro-B).
1
Make sure the camera and printer are off.
2
Connect the camera to the printer.
● Open the terminal cover. Holding the smaller cable plug in the orientation shown, insert the plug fully into the camera terminal.
● Connect the larger cable plug to the printer. For other connection details, refer to the printer manual.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
3
Turn the printer on.
157
4
Turn the camera on.
● Press the [ ] button to turn the camera on.
5
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image.
6
Access the printing screen.
● Press the [ ] button, choose [ ], and press the [ ] button again.
7
Print the image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [Print], and then press the
[ ] button.
● Printing now begins.
● To print other images, repeat the above procedures starting from step 5 after printing is finished.
● When you are finished printing, turn the camera and printer off and disconnect the cable.
● For Canon-brand PictBridge-compatible printers (sold separately),
Configuring Print Settings
Cropping
Paper
Settings
Still Images Movies
1
Access the printing screen.
● Follow steps 1 – 6 in “Easy Print”
( = 157) to access this screen.
2
Configure the settings.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an item, and then choose an option by pressing the [ ][ ] buttons.
Default
Date
Matches current printer settings.
Prints images with the date added.
File No.
Prints images with the file number added.
Both
Off
Default
Off
Prints images with both the date and file number added.
–
Matches current printer settings.
–
On
Uses information from the time of shooting to print under optimal settings.
Red-Eye 1 Corrects red-eye.
No. of
Copies
Choose the number of copies to print.
–
–
Specify a desired image area to print
Specify the paper size, layout, and other details (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
158
Cropping Images before Printing
Still Images Movies
By cropping images before printing, you can print a desired image area instead of the entire image.
1
Choose [Cropping].
● After following step 1 in “Configuring Print
Settings” ( = 158) to access the printing
screen, choose [Cropping] and press the
[ ] button.
● A cropping frame is now displayed, indicating the image area to print.
2
Adjust the cropping frame as needed.
● To resize the frame, move the zoom lever.
● To move the frame, press the
[ ][ ][ ][ ] buttons.
● To rotate the frame, turn the [ ] dial.
● When finished, press the [ ] button.
3
Print the image.
●
Follow step 7 in “Easy Print” ( = 157)
to print.
● Cropping may not be possible at small image sizes, or at some aspect ratios.
● Dates may not be printed correctly if you crop images shot with
[Date Stamp ] selected.
Choosing Paper Size and Layout before Printing
Still Images Movies
1
Choose [Paper Settings].
● After following step 1 in “Configuring Print
Settings” (
screen, choose [Paper Settings] and press the [ ] button.
2
Choose a paper size.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an option, and then press the [ ] button.
3
Choose a type of paper.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an option, and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
4
Choose a layout.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an option.
● When choosing [N-up], press the [ ][ ] buttons to specify the number of images per sheet.
● Press the [ ] button.
5
Print the image.
159
Available Layout Options
Default
Bordered
Fixed Size
Matches current printer settings.
Prints with blank space around the image.
Borderless Borderless, edge-to-edge printing.
N-up
ID Photo
Choose how many images to print per sheet.
Prints images for identification purposes.
Only available for images with a recording pixel setting of
L and an aspect ratio of 4:3.
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Printing ID Photos
Still Images Movies
1
Choose [ID Photo].
● Following steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
(
= 159), choose [ID Photo] and press
the [ ] button.
2
Choose the long and short side length.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an item. Choose the length by pressing the [ ][ ] buttons, and then press the [ ] button.
3
Choose the printing area.
● Follow step 2 in “Cropping Images before
Printing” (
area.
4
Print the image.
Printing Movie Scenes
Still Images Movies
1
Access the printing screen.
● Follow steps 1 – 6 in “Easy Print”
( = 157) to choose a movie. The screen
at left is displayed.
2
Choose a printing method.
● Press the [ ][ ] buttons or turn the
[ ] dial to choose [ ], and then press the [ ][ ] buttons to choose the printing method.
3
Print the image.
Movie Printing Options
Single
Sequence
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single sheet of paper. You can also print the folder number, file number, and elapsed time for the frame by setting [Caption] to [On].
● To cancel printing in progress, press the [ ] button, choose [OK], and then press the [ ] button again.
● After displaying a scene to print as described in steps 2 – 5 of
“Viewing” (
= 87), you can also access the screen in step 1
here by pressing the [ ][ ] buttons to choose [ ] in the movie control panel and then pressing the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
160
Adding Images to the Print List (DPOF)
Still Images Movies
Batch printing ( = 162) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to DPOF (Digital Print Order Format) standards.
Configuring Print Settings
Still Images Movies
Specify the printing format, whether to add the date or file number, and other settings as follows. These settings apply to all images in the print list.
● Press the [ ] button, and then choose [Print Settings] on the [ ] tab.
Choose and configure items as desired
(
Print Type
Date
File No.
Clear
DPOF data
Standard
Index
Both
On
Off
On
Off
On
Off
One image is printed per sheet.
Smaller versions of multiple images are printed per sheet.
Both standard and index formats are printed.
Images are printed with the shooting date.
–
Images are printed with the file number.
–
All image print list settings are cleared after printing.
–
● Not all of your DPOF settings may be applied in printing by the printer or photo development service, in some cases.
● [ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera. Changing the print settings using this camera may overwrite all previous settings.
● Specifying [Index] will prevent you from choosing [On] for both
[Date] and [File No.] at the same time.
● Index printing is not available on some Canon-brand PictBridgecompatible printers (sold separately).
● The date is printed in a format matching setting details in [Date/
Time] on the [ ] tab (
Setting Up Printing for Individual Images
Still Images Movies
1
Choose [Select Images & Qty.].
● Press the [ ] button, choose
[Select Images & Qty.] on the [ ] tab, and then press the [ ] button.
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
● You can now specify the number of copies.
● If you specify index printing for the image, it is labeled with a [ ] icon. To cancel index printing for the image, press the [ ] button again. [ ] is no longer displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
161
3
Specify the number of prints.
● Press the [ ][ ] buttons or turn the [ ] dial to specify the number of prints (up to 99).
● To set up printing for other images and specify the number of prints, repeat steps
2 – 3.
● Printing quantity cannot be specified for index prints. You can only choose which images to print, by following step 2.
● When finished, press the [ to return to the menu screen.
] button
Setting Up Printing for a Range of Images
Still Images Movies
● Following step 1 in “Setting Up Printing for Individual Images” (
[Select Range] and press the [ ] button.
● Follow steps 2 – 3 in “Selecting a Range”
(
● Press the [ ][ ] buttons to choose
[Order], and then press the [ ] button.
Setting Up Printing for All Images
Still Images Movies
● Following step 1 in “Setting Up Printing for Individual Images” (
[Select All Images] and press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Clearing All Images from the Print List
● Following step 1 in “Setting Up Printing for Individual Images” (
[Clear All Selections] and press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Printing Images Added to the Print List (DPOF)
Still Images Movies
● When images have been added to the print list (
is displayed after you connect the camera to a PictBridge-compatible printer. Press the [ ][ ] buttons to choose [Print now], and then simply press the [ ] button to print the images in the print list.
● Any DPOF print job that you temporarily stop will be resumed from the next image.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
162
Adding Images to a Photobook
Still Images Movies
Photobooks can be set up on the camera by choosing up to 998 images on a memory card and transferring them into the software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer.
Choosing a Selection Method
● Press the [ ] button, choose
[Photobook Set-up] on the [ ] tab, and then choose how you will select images.
● [ ] may be displayed on the camera to warn you that the memory card has print settings that were configured on another camera. Changing the print settings using this camera may overwrite all previous settings.
Adding Images Individually
Still Images Movies
1
Choose [Select].
●
Following the procedure in “Choosing a Selection Method” ( = 163), choose
[Select] and press the [ ] button.
2
Choose an image.
● Press the [ ][ ] buttons or turn the [ ] dial to choose an image, and then press the [ ] button.
● [ ] is displayed.
● To remove the image from the photobook, press the [ ] button again. [ ] is no longer displayed.
● Repeat this process to specify other images.
● When finished, press the [ to return to the menu screen.
] button
Adding All Images to a Photobook
Still Images Movies
●
Following the procedure in “Choosing a Selection Method” ( = 163), choose
[Select All Images] and press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Removing All Images from a Photobook
Still Images Movies
●
Following the procedure in “Choosing a Selection Method” ( = 163), choose
[Clear All Selections] and press the [ ] button.
● Press the [ ][ ] buttons or turn the [ ] dial to choose [OK], and then press the
[ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
163
Appendix
Helpful information when using the camera
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Power
Nothing happens when the power button is pressed.
● Confirm that the battery pack is charged (
● Confirm that the battery pack is inserted facing the correct way (
●
Confirm that the memory card/battery cover is fully closed ( = 18).
● Dirty battery terminals reduce battery performance. Try cleaning the terminals with a cotton swab and reinserting the battery pack a few times.
The battery pack runs out of power quickly.
● Battery performance decreases at low temperatures. Try warming the battery pack a little by putting it in your pocket, for example, ensuring that the terminals do not touch any metal objects.
● Dirty battery terminals reduce battery performance. Try cleaning the terminals with a cotton swab and reinserting the battery pack a few times.
● If these measures do not help and the battery pack still runs out of power soon after charging, it has reached the end of its life. Purchase a new battery pack.
The lens is not retracted.
● Do not open the memory card/battery cover while the camera is on. Close the cover, turn the camera on, and then turn it off again (
The battery pack is swollen.
● Battery swelling is normal and does not pose any safety concerns. However, if battery swelling prevents the battery pack from fitting in the camera, contact a
Canon Customer Support Help Desk.
Display on a TV
Camera images look distorted or are not displayed on a TV ( = 152).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
164
Shooting
Cannot shoot.
● In Playback mode (
= 87), press the shutter button halfway (
Strange display on the screen under low light (
Strange display on the screen when shooting.
● Note that the following display problems are not recorded in still images but are recorded in movies.
The screen may flicker and horizontal banding may appear under fluorescent or LED lighting.
Full-screen display is not available while shooting ( = 50).
No date stamp is added to images.
● Configure the [Date Stamp ] setting (
= 42). Note that date stamps are not
added to images automatically, merely because you have configured the [Date/
Time] setting (
● Date stamps are not added in shooting modes (
cannot be configured (
[ ] flashes on the screen when the shutter button is pressed, and shooting is not possible (
[ ] is displayed when the shutter button is pressed halfway (
● Set [IS Mode] to [Continuous] (
●
Raise the flash and set the flash mode to [ ] ( = 81).
● Increase the ISO speed (
● Mount the camera on a tripod or take other measures to keep it still. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to secure
Shots are out of focus.
● Press the shutter button halfway to focus on subjects before pressing it all the
● Make sure subjects are within focusing range (
●
● Confirm that unneeded functions such as macro are deactivated.
●
Set [AF-assist Beam] to [On] ( = 54).
Try shooting with focus lock or AF lock (
No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway.
● To have AF frames displayed and the camera focus correctly, try composing the shot with higher-contrast subject areas centered before you press the shutter button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Subjects in shots look too dark.
●
Raise the flash and set the flash mode to [ ] ( = 81).
● Adjust brightness by using exposure compensation (
●
●
Adjust contrast by using i-Contrast (
Use AE lock or spot metering ( =
Subjects look too bright, highlights are washed-out.
● Lower the flash and set the flash mode to [ ] (
● Adjust brightness by using exposure compensation (
●
●
Use AE lock or spot metering ( =
Reduce the lighting on subjects.
Shots look too dark despite the flash firing ( = 36).
● Shoot within flash range (
● Adjust brightness by using flash exposure compensation or changing the flash output level (
●
Increase the ISO speed ( = 72).
Subjects in flash shots look too bright, highlights are washed-out.
● Shoot within flash range (
● Lower the flash and set the flash mode to [ ] (
● Adjust brightness by using flash exposure compensation or changing the flash output level (
White spots appear in flash shots.
● This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
●
●
High ISO speeds in some shooting modes may cause grainy images ( = 59).
Subjects are affected by red-eye.
●
Set [Red-Eye Lamp] to [On] ( =
54). The red-eye reduction lamp ( = 4)
will light up for flash shots. For best results, have subjects look at the red-eye reduction lamp. Also try increasing the lighting in indoor scenes and shooting at closer range.
● Edit images using red-eye correction (
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
165
Recording to the memory card takes too long, or continuous shooting is slower.
● Use the camera to perform low-level formatting of the memory card (
Shooting settings or FUNC. menu settings are not available.
● Available setting items vary by shooting mode. Refer to “Functions Available in
Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” (
The Babies or Children icon is not displayed.
● The Babies and Children icons will not be displayed if the birthday is not set in face information (
= 45). If the icons still are not displayed even when you set
the birthday, re-register face information (
= 46), or make sure that the date/
time is set correctly (
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
● Use the camera to format the memory card, or switch to a card that supports high-speed recording. Note that even if the elapsed time display is incorrect, the length of movies on the memory card corresponds to the actual recording time
(
[ ] is displayed and shooting stops automatically.
● The camera’s internal memory buffer filled up as the camera could not record to the memory card quickly enough. Try one of the following measures.
-
Use the camera to perform low-level formatting of the memory card ( = 147).
-
Lower the image quality ( = 51).
Switch to a memory card that supports high-speed recording (
Zooming is not possible.
● Zooming is not possible when shooting movies in [
and [
Subjects look distorted.
● Subjects that pass in front of the camera quickly may look distorted. This is not a malfunction.
Playback
Playback is not possible.
● Image or movie playback may not be possible if a computer is used to rename files or alter the folder structure.
Playback stops, or audio skips.
● Switch to a memory card that you have performed low-level formatting on with the
● There may be brief interruptions when playing movies copied to memory cards that have slow read speeds.
● When movies are played on a computer, frames may be dropped and audio may skip if computer performance is inadequate.
Sound is not played during movies.
●
Adjust the volume ( = 143) if you have activated [Mute] ( = 143) or the sound
in the movie is faint.
● No sound is played for movies shot in [ ] (
( = 56) mode because audio is not recorded in these modes.
]
Cannot access the Story Highlights home screen by pressing the [ ] button.
● Home screen display is not possible when connected to a printer. Disconnect the camera from the printer.
● Home screen display is not possible during Wi-Fi connections. End the Wi-Fi connection.
A desired subject icon for an album is not displayed on the Story
Highlights home screen.
● In simple information display mode (
= 88), choose an image that shows the
name of the person for the album before accessing the Story Highlights home screen (
Memory Card
The memory card is not recognized.
●
Restart the camera, with the memory card in it ( = 25).
Computer
Cannot transfer images to a computer.
● When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows.
Press the [ ] button to enter Playback mode. Hold the [ ] button down as you press the [ ] and [ ] buttons at the same time. On the next screen, press the [ ][ ] buttons to choose [B], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
166
Wi-Fi
Cannot access the Wi-Fi menu by pressing the [ ] button.
● The Wi-Fi menu cannot be accessed while the camera is connected to a printer or computer via a cable. Disconnect the cable.
Cannot add a device/destination.
● A total of 20 items of connection information can be added to the camera. Erase unneeded connection information from the camera first, and then add new
devices/destinations ( = 139).
●
Use a computer or smartphone to register Web services ( = 126).
● To add a smartphone, first install the dedicated application Camera Connect on your smartphone (
● To add a computer, first install the software CameraWindow on your computer.
Also check your computer and Wi-Fi environment and settings (
● Do not use the camera near sources of Wi-Fi signal interference such as microwave ovens or other equipment operating on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
Cannot connect to the access point.
● Confirm that the access point channel is set to a channel supported by the
camera ( = 183). Note that instead of auto channel assignment, it is advisable to
specify a supported channel manually.
Cannot send images.
● The destination device has insufficient storage space. Increase the storage space on the destination device and resend the images.
● The write-protect switch of the memory card in the destination camera is set to the locked position. Slide the write-protect switch to the unlocked position.
● Images are not sent to CANON iMAGE GATEWAY or other Web services if you move or rename image files or folders on the computer that received images sent using Image Sync via an access point (
= 134). Before moving or renaming
these image files or folders on the computer, make sure the images have already been sent to CANON iMAGE GATEWAY or other Web services.
Cannot resize images for sending.
● Images cannot be resized to be bigger than the recording pixel setting of their original size.
● Movies cannot be resized.
Images take a long time to send./The wireless connection is disrupted.
● Multiple images may take a long time to send. Try resizing the image to reduce sending time (
● Movies may take a long time to send.
● Do not use the camera near sources of Wi-Fi signal interference such as microwave ovens or other equipment operating on the 2.4 GHz band. Note that images may take a long time to send even when [ ] is displayed.
● Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
No notification message is received on a computer or smartphone after adding CANON iMAGE GATEWAY to the camera.
● Make sure the email address you entered is correct, and try adding the destination again.
● Check the email settings on the computer or smartphone. If they are configured to block email from certain domains, you may not be able to receive the notification message.
Want to erase Wi-Fi connection information before disposing of the camera or giving it to someone else.
●
Reset the Wi-Fi settings ( = 141).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
167
On-Screen Messages
If an error message is displayed, respond as follows.
Shooting or Playback
No memory card
● The memory card may be inserted facing the wrong way. Reinsert the memory
card facing the correct way ( = 18).
Memory card locked
● The write-protect switch of the memory card is set to the locked position. Switch
the write-protect switch to the unlocked position ( = 18).
Cannot record!
● Shooting was attempted without a memory card in the camera. To shoot, insert a memory card facing the correct way (
Memory card error (
● If the same error message is displayed even after you have formatted a
supported memory card ( = 2) and have inserted it facing the correct way
(
= 18), contact a Canon Customer Support Help Desk.
Insufficient space on card
●
There is not enough free space on the memory card to shoot ( = 33,
= 102). Either erase unneeded images
(
= 98) or insert a memory card with enough free space (
Charge the battery (
No Image.
● The memory card does not contain any images that can be displayed.
Protected! (
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
MOV/Cannot play back MP4
● Unsupported or corrupt images cannot be displayed.
● It may not be possible to display images that were edited or renamed on a computer, or images shot with another camera.
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot rotate/Cannot modify image/Cannot modify/Unselectable image./No identification information
● The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies.
Edit ID Info* (
Photobook Set-up* (
Invalid selection range
● When specifying a range for image selection (
attempted to choose an initial image that was after the final image, or vice-versa.
Exceeded selection limit
●
More than 998 images were selected for Print List ( = 161) or Photobook Set-up
( = 163). Choose 998 images or less.
● Print List (
= 163) settings could not be saved
correctly. Reduce the number of selected images and try again.
● You attempted to choose more than 500 images in Protect (
Naming error!
● The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached. On the [ ] tab, change [File Numbering] to [Auto Reset]
( = 147), or format the memory card (
Lens Error
● This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations.
● Frequent display of this error message may indicate damage. In this case, contact a Canon Customer Support Help Desk.
A camera error was detected ( error number )
● If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.
● Frequent display of this error message may indicate damage. In this case, write down the error number ( Exx ) and contact a Canon Customer Support Help Desk.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
168
File Error
●
Correct printing ( = 157) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is connected to the printer.
Print error
● Check the paper size setting (
= 159). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera again.
Ink absorber full
● Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.
Wi-Fi
Connection failed
● No access points were recognized. Check the access point settings (
● A device could not be found. Turn the camera off and on again, and retry the connection.
● Check the device you want to connect to and make sure it is ready for connection.
Cannot determine access point
● The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.
No access points found
● Check to make sure that the access point is turned on.
● When connecting to an access point manually, make sure that you entered the correct SSID.
Incorrect password/Incorrect Wi-Fi security settings
● Check the access point security settings (
IP address conflict
● Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
● You may be in an environment where Wi-Fi signals are obstructed.
● Avoid using the camera’s Wi-Fi function around microwave ovens and other devices that operate on the 2.4 GHz band.
● Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.
● Check the connected device to make sure it is not experiencing errors.
Sending failed
Memory card error
● If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help
Desk.
Receiving failed
Insufficient space on card
● There is not enough free space on the memory card in the target camera to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space.
Receiving failed
Memory card locked
● The write-protect switch of the memory card in the camera to receive the images is set to the locked position. Slide the write-protect switch to the unlocked position.
Receiving failed
Naming error!
● When the highest folder number (999), and the highest image number (9999) have been reached on the receiving camera, images cannot be received.
Insufficient space on server
● Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create space.
● Save the images sent via Image Sync (
Check network settings
● Check to make sure your computer can connect to the Internet with the current network settings.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
169
On-Screen Information
Shooting (Information Display)
(32)
(12) (13)(14)(15) (16) (17) (18) (19)
(31)
(8)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(9)
(10)
(11)
(20)
(21)
(22)
(23)
(24)
(33)
(34) (35) (36) (37) (38)
(25) (26) (27) (28) (29) (30)
(40)
(1) Shooting mode (
(2) Flash mode (
(3) Flash exposure compensation /
Flash output level
(5) Drive mode (
(6) Mercury lamp correction (
(7) White balance (
(8) Self-timer (
(9) My Colors (
(10) Eco mode (
(11) Camera shake warning ( = 36)
(39)
(12) Bluetooth connection status
(13) IS mode icon (
(15) Still image compression (
Recording pixel setting ( = 50)
(16) Recordable shots (
(17) Movie quality (
(19) Zoom magnification (
Digital tele-converter ( = 77)
(20) Focus range (
(21) Connected via Bluetooth to a smartphone and acquiring GPS information (
(32) Zoom bar (
(33) Auto (
(
(36) Image stabilization (
(26) Shutter speed (
(27) Aperture value (
(37)
(38)
Auto level (
Auto slow shutter (
(39) MF indicator (
* In [
(40) Exposure compensation level
] mode, indicates the number of shots available.
Battery Level
An on-screen icon or message indicates the battery charge level.
Display Details
Sufficient charge
(Blinking red)
[Charge the battery]
Slightly depleted, but sufficient
Nearly depleted—charge the battery pack soon
Depleted—charge the battery pack immediately
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
170
Playback (Detailed Information Display)
(2) (3) (4)(5)(6)(7)(8)(9)(10) (11) (12)
(1)
(13) (14) (15) (16)
(2) Current image no. / Total no. of images
(4) Battery level (
(5) Wi-Fi signal strength (
(6) Bluetooth connection status
(8) Image editing (
(10) Protection (
(11) Folder number - File number
(12) Shooting date/time ( = 19)
(13) Shooting mode (
(14) Shutter speed (
(17)
(18) (19) (20) (21)
(24) (26) (28)
(22) (23)
(29) (30)
(25) (27)
(15) Aperture value ( = 85, = 85)
(16) Exposure compensation level
(17) ISO speed (
(18) Metering method (
(19) Flash (
(20) White balance (
(21) Mercury lamp correction ( = 51)
(22) My Colors (
(23) Focus range (
(24) Red-eye correction ( = 104),
Short clip playback effect
(25) i-Contrast (
(26) Image quality / Frame rate
(28) Compression (image quality)
(
(
(29) Still images: Recording pixel setting (
Movies: Playback time (
(30) File size
● Some information may not be displayed when viewing images on a TV (
Summary of Movie Control Panel
The following operations are available on the movie control panel,
accessed as described in “Viewing” ( = 87).
Play
Slow Motion (To adjust the playback speed, press the [ ][ ] buttons or turn the [ ] dial. No sound is played.)
Skip Backward* or Previous Clip ( = 107) (To continue skipping
backward, keep holding down the [ ] button.)
Previous Frame (For fast-rewind, keep holding down the [ ] button.)
Next Frame (For fast-forward, keep holding down the [ ] button.)
Skip Forward* or Next Clip (
forward, keep holding down the [ ] button.)
Erase Clip (displayed when a digest movie, Creative Shot movie,
or album movie is selected ( = 107))
Edit (
Shown when the camera is connected to a PictBridge-compatible
* Displays the frame approx. 4 sec. before or after the current frame.
● During movie playback, you can skip back or forward (or to the previous or next clip) by pressing the [ ][ ] buttons.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
171
Functions and Menu Tables
Functions Available in Each Shooting Mode
Shooting Mode
Function
– O O O – – – O
*1
O O O O O O O O O O O O O O – O – –
Shutter Speed (
Program Shift (
AE Lock (
4
AE Lock (Movie)/Exposure Shift (
Focus Range (
– – – O O O O – – O O O O O O O O O O O O O O – – –
O O O O – – – O – O O O O O O – O O O O O O O – – –
– O – O
*2 *2
– – – – – – – –
*2
– – – – – – – – – – –
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O –
O – O –
–
–
*3
– O O O –
–
*3
–
–
O –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– O O
/
Screen Display
Information Display/No Information Display
Tracking AF Subject Selection (
Change Shooting Display (
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O – – – – – O O – – – O O O O O O O O O – O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O – – – – O O O – – – – O O – – – – O O – – –
O O O O O O – – O O – – – – O O – – – – – O O O O –
O Available or set automatically. – Not available.
*1 Set in [Brightness] (
*2 Not available, but switches to [ ] in some cases.
*3 Aperture value, shutter speed, and ISO speed may be changed automatically to maintain suitable exposure.
*4 FE lock not available in [ ] flash mode.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
172
FUNC. Menu
Shooting Mode
Function
/
My Colors (
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O – – – – – – – – – – – – – – – – – – – – – –
/ / * 1 / * 1 / / / / / / /
* 2
/ / / / /
ISO Speed (
AUTO
80 / 100 / 200 / 400 / 800 / 1600 / 3200
Shooting Mode (
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O – – – – – – – O O O – – – – – – – – – – O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O –
– O O O O
O O O O –
– – – – –
–
O
–
–
– – – – – O O O – O – – – – – – – – O O
O O O O O O O O O O O O O O O O O O O O
–
–
–
–
– – – – – – – – – – – – – – – – – –
– O O O O O O O O O O O O O O O O O
/ /
Delay*
Shots*
3
4
Flash Exposure Compensation (
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O – – – O O O O O O O O O O O O
O O O O O O O O O O O – – – O O O O O O O O O O O O
O O O O – O – – O O – – – – O O O O O O O O O O – –
– O O O – – – O – – – – – – – – – – – – – – – – – –
O O O – – – – – – – – – – – – – – – – – – – – – – –
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 Cannot be set to 0 seconds in modes without selection of the number of shots.
*4 One shot (cannot be modified) in modes without selection of the number of shots.
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
173
Shooting Mode
Function
O O O O O O O O O O O O O O O O O O O O O O O O O O
– – – – – O – – – – – – – – – – – – – – – – – – – –
O O O O – O – – – O – – – – – O O O O O O O O O – –
O O O O – – – – O – – – – – – O O O O O O O O O – – *
1
Still Image Aspect Ratio (
O O O O – O – – O O O O O O – – O – – – O O O O
*2
O
O O O O – O – – O O O O O O – – O – – – – O O O – –
O O O O O O O O O O O O O O O O O O O O O O O O
*2
–
O O O O – O – O O O O O O O – – O – – – – O O O – –
/ /
O O O O O O O O O O O O O O O – O O O O O O O O O O
O O O O – O – – O O – O O O – – – – – – – – – O O O
O O O O – – – – – – – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – – – – – – – – – O –
O O O O O O – O O O O O O O O O O O O O – O O O O –
O O O O O O O O O O O O O O O O O O O O
*3
O O O O O
O O O O O O – O O O O O O O O O O O O O
*3
O O O O –
O Available or set automatically. – Not available.
*1 [ ] is set with [ ], AF lock, or [ ].
*2 Set automatically to suit the aspect ratio of the movie recording size.
*3 Synchronizes with the aspect ratio setting and is automatically set
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
174
Shooting Tab
Shooting Mode
Function
AF Frame (
Face AiAF*
1
Tracking AF
Center
AF Frame Size (
2
Normal
Small
Standard
Off
1.6x/2.0x
Enable
Disable
Continuous AF (
Enable
Disable
O O O O O
O O O O –
O O O O –
O O O O –
O O O O –
O O O O O
O O O O O
O O O O –
O O O O –
O O O O O
O
–
–
–
–
O
O
–
–
*3
O O – O O O O O O O O O – O – O O – O O
–
–
–
–
–
– O O O – – – – O O – – – – O O – – –
– O O O – – – – O O O O O – O O O O O
–
–
– O O – – – – O O O O O – O O – O O
– O O – – – – O O O – O – O O – O O
O O O O O O O O – O O O O O O O O O O O
–
–
– O O – O O O – – – – – – – – – O O –
– – – – – – – – – – – – – – – – – – –
– O O O – – – – O O – – – – O O – – –
O O – O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O – O O O O O O O – O O
O O O O – – – O – O O – – – O O O O O O O O O O – –
*1 Operation when no faces are detected varies by shooting mode.
*2 Available when the AF frame is set to [Center].
*3 [Enable] when subject movement is detected.
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
175
Shooting Mode
Function
On
Off
Off
2x/4x
On
Off
MF Peaking Settings (
Peaking
On
Level
Color
Off
Low/High
Red/Blue/Yellow
Flash Mode
Auto
Manual
Flash Exp. Comp
Flash Output
Red-Eye Lamp
Safety FE
On/Off
On
Off i-Contrast (
Auto
Off
On
Off
O O O O O
O O O O O
O O O O O
O O O O –
O O O O –
O O O O O
O O O O –
O O O O O
O O O O –
O O O O –
O
O
O
–
–
O
–
O
–
–
O O – O O O O O O O O O O O O O O – O O
O O O O O – O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O
–
–
O O O O O O O O O O O O O O O O O O O O
–
–
–
–
–
–
– O – – – – – O O – – – – O O – – –
– O O – – – O O O O O O O O O – O O
– O O – – – O O O O O O O O O – O O
O O O O O O O O O O O O O O O O O O O O
– – – O O – – – O O O O O O O O O – O O
– O O – – – O O O O O O O O O – O O
– O O O O O O O – O O O O O O O O O O O O O O – – –
O O O – – – – – – – – – – – – – – – – – – – – – – –
See “Flash Exposure Compensation” in “FUNC. Menu” ( = 173).
See “Flash Output Level” in “FUNC. Menu” (
O O O O O O O O – O O O O O O O O O O O O O O – – –
– O O O O O O O – O O O O O O O O O O O O O O – – –
O O O O – – – – – – – – – – – – – – – – – – – – – –
O O O O O
O O O O –
– – – – –
O O O O O
O
–
O
O
–
O – O O – O O O O – O O O O O O O O O O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– O – – – – – – – – – –
– – – – – – – – – – – –
O O O O O O O O O O O O O O O O O O O O
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
176
Shooting Mode
Function
Safety shift (
On
Off
Wind Filter (
Auto
Off
Attenuator (
Off/On
Auto
Auto slow shutter (
Disable
Enable
Review image after shooting (
Off
Display Time
IS Mode
Quick
2 sec./4 sec./8 sec./Hold
Off
Display Info
Detailed
On/Off
Reverse Display (
On
Off
Off
Continuous
Shoot Only
Dynamic IS
Low
Standard
High
– O O – – – – – – – – – – – – – – – – – – – – – – –
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O – O O O O O O O O O O O O O – O O O O –
O O O O – – O – – – – – – – – – – – – – O – – – O O
O O O O – – – – – – – – – – – – – – – – – – – – O –
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
– – – – – – – – – – – – – – – – – – – – – – – – O –
O O O O O O – O O O O O O O O O O O O O O O O O O O
O O O O O O – O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O – O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O O O O – O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O – O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
O O O O – – – O O O O O O O – O O O O O O O O O – –
O O O O O O O O O O O O O O – O O O O O O O O O O O
O O O O O O – O O O O O O O O O O O O O – O O O O –
– – – – – – – – – – – – – – – – – – – – – – – – O –
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
177
Function
Auto level (
Enable
Disable
Display Area (
Large/Medium/Small
Auto Settings (
Seek Assist
On
Auto Zoom
Off
Face/Upper Body/Whole
Body/Manual/Auto
Off
Date Stamp (
Off
Date / Date & Time
Include Stills/No Stills
Face ID
On
Off
Shooting Mode
O O O O O
O O O O O
O O O O O
– O O O O
O O O O O
– O O O O
O O O O O
O O O O O
O O O O O
– – – – O
O
O
O
O
O
O
O
O
O
–
– O O O O O O O O O O O O O – O O O O –
O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O – O – O O – O –
O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O – O – O O – O –
O O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O
–
–
– O O – O O O – – – – – – – – – O – –
– – – – – – – – – – – – – – – – – – –
O O O O O O – O O O O O O O O O O O O O O O O O O O
O O O O O O O O O O O O O O O O O O O O O O O O O O
- When using Face ID ( = 45) in some modes or with some settings,
names of people may be recorded in shots even when not displayed.
O Available or set automatically. – Not available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
178
Set Up Tab
Item
Mute
Volume
Hints & Tips
Date/Time
Time Zone
Lens Retraction
Eco Mode
Power Saving
Disp. Brightness
Start-up Image
Format
File Numbering
Create Folder
Units
Video System
Wi-Fi connect’n
Wireless settings
GPS settings
Certification Logo Display
Language
Reset camera
Reference Page
Playback Tab
Item
Play Creative Shot Movies
Short Clip Mix
Album Playback
List/Play Digest Movies
Slideshow
Erase
Protect
Rotate
Favorites
Photobook Set-up i-Contrast
Red-Eye Correction
Cropping
Resize
My Colors
Face ID Info
Transition Effect
Index Effect
Scroll Display
Group Images
Auto Rotate
Resume
Reference Page
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
179
Print Tab
Item
Select Images & Qty.
Select Range
Select All Images
Clear All Selections
Print Settings
Reference Page
–
Playback Mode FUNC. Menu
Item
Rotate
Protect
Favorites
Group Playback
Play Movie
Play Linked Digest Movie
Smart Shuffle
Image Search
Slideshow
Reference Page
Handling Precautions
● The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact.
● Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data.
● If water droplets or dirt adheres to the camera or screen, wipe with a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
● Never use cleaners containing organic solvents to clean the camera or screen.
● Use a blower brush to remove dust from the lens. If cleaning is difficult, contact a Canon Customer Support Help Desk.
● To prevent condensation from forming on the camera after sudden temperature changes (when the camera is transferred from cold to warm environments), put the camera in an airtight, resealable plastic bag and let it gradually adjust to the temperature before removing it from the bag.
● If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove the battery pack and memory card, and wait until the moisture has evaporated before resuming use.
● Store unused battery packs in a plastic bag or other container. To maintain battery performance if you will not use the battery pack for some time, about once a year charge it and then use the camera until it runs out of power before storing the battery pack.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
180
Specifications
Image Sensor
Image size ........................................1/2.3 type
Camera Effective Pixels
(Image processing may cause a decrease in the number of pixels.)....Approx. 20.3 megapixels
Total Pixels........................................Approx. 21.1 megapixels
Lens
Focal Length
(35mm film equivalent) ..................... 4.3 ‒ 172.0 mm
(24 ‒ 960 mm)
Zoom Magnification ..........................40x
Shooting Range (measured from the tip of the lens)
Shooting
Mode
*
Other than the above
Focus
Range
–
Maximum Wide Angle
( )
Maximum Telephoto
( )
1.0 cm (0.4 in.) ‒ infinity 2 m (6.6 ft.) ‒ infinity
5.0 cm (2.0 in.) ‒ infinity 2 m (6.6 ft.) ‒ infinity
1.0 – 50.0 cm
(0.4 in. – 1.6 ft.)
–
* Manual Focus is the same.
Shutter
Shutter Speed
Auto Mode (automatic settings)
Max. Tv .........................................1 sec.
Min. Tv ..........................................1/3200 sec.
Range in all shooting modes
Max. Tv .........................................15 sec.
Min. Tv ..........................................1/3200 sec.
Available Tv values (sec.)
Shooting mode ............................. M mode / Tv mode
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2,
1.6, 1.3, 1, 0.8, 0.6, 0.5, 0.4, 0.3,
1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15,
1/20, 1/25, 1/30, 1/40, 1/50, 1/60,
1/80, 1/100, 1/125, 1/160, 1/200,
1/250, 1/320, 1/400, 1/500, 1/640,
1/800, 1/1000, 1/1250, 1/1600,
1/2000, 1/2500, 1/3200
Aperture
F number
Wide angle ........................................3.3 ‒ 8.0
Telephoto ..........................................6.9 ‒ 8.0
Flash
Built-in Flash
Flash Range (Max. wide angle) closest point ..................................Approx. 50.0 cm (1.6 ft.) farthest point .................................Approx. 4 m (13.1 ft.)
Flash Range (Telephoto end) closest point ..................................Approx. 2 m (6.6 ft.) farthest point .................................Approx. 2 m (6.6 ft.)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
181
Monitor
Type ......................................................TFT color liquid crystal
Screen size ...........................................3.0 type
Effective pixels ......................................Approx. 0.92 million dots
Shooting
Digital zoom
Magnification.....................................Approx. 4x
Maximum with Optical Zoom ............Approx. 160x
Focal Length (Telephoto end,
35mm film equivalent).......................Approx. 3840 mm equivalent
ZoomPlus
(Number of recording pixels L) .........Approx. 80x
Continuous Shooting
Shooting speed*
Auto/P Normal Continuous
Continuous shooting speed ......Max approx. 5.9 shots/sec
P Continuous AF
Continuous shooting speed ......Max approx. 4.6 shots/sec
* Continuous shooting speed may become slower due to the following factors:
Tv value/Av value/Subject conditions/Brightness/Shooting with flash/
Zoom positions/ Battery level
Recording
File Format ............................................ DCF-compliant DPOF compatible
(Version1.1)
Data Type
Still Image
Recording Format .........................Exif2.3 (DCF2.0)
Image ............................................JPEG only
Movie
Recording Format .........................MP4
Video.............................................MPEG-4 AVC/H.264
Audio ............................................MPEG-4 AAC-LC (stereo)
Recorded Pixels, Number of shots per a memory card
Still Image
Using a 16 GB (UHS-I) memory card (Approx. shots)
1766
2980
10798
3546
5925
9344
16755
53992
80988
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
182
Movie
Size
(1920 x 1080) 4288 KB/sec
(1920 x 1080) 2945 KB/sec
(1280 x 720)
(640 x 480)
Recording file size (Approx.)
992 KB/sec
382 KB/sec
Single Clip
Recording Time
(Approx.)
29 min. 59 sec.
29 min. 59 sec.
29 min. 59 sec.
59 min. 59 sec.
Recording time per a memory card
(Approx.)
59 min. 30 sec.
1 hr. 26 min. 5 sec.
4 hr. 5 min. 15 sec.
10 hr. 22 min. 35 sec.
● Continuous shooting is possible until the memory card becomes full or the recording length for one movie reaches approx. 29 minutes 59 seconds.
Power
Battery Pack .........................................NB-13L
Number of still image shots (CIPA compliant: room temperature 23 °C / 73 °F) Approx. 250 shots
Number of still image shots (Eco Mode
On)
Approx. 355 shots
Movie recording time (CIPA compliant: room temperature 23 °C / 73 °F)
Movie recording time (Continuous
Shooting)
Playback Time*
Approx. 50 min.
Approx. 85 min.
Approx. 5 hr.
* Time when playing back a slideshow of still images
Interface
Wired
Digital terminal
(Hi-Speed USB compliant)................Micro USB
HDMI OUT terminal ..........................Type D
Wireless
NFC .................................................. NFC Forum Type 3/4 Tag compliant (Dynamic)
Bluetooth
Compliance standards .................. Bluetooth Ver. 4.1
(Bluetooth low energy technology)
Transmission method ...................GFSK modulation
Wi-Fi
Compliance standards ..................IEEE 802.11b/g/n
Transmission frequency
Frequency .................................2.4 GHz
Channels ..................................1-11ch
Security
Infrastructure mode .................. WPA2-PSK (AES/TKIP),
WPA-PSK (AES/TKIP), WEP
* Wi-Fi Protected Setup compliant
Camera access point mode ......WPA2-PSK (AES)
Ad hoc mode ............................WPA2-PSK (AES)
Operating Environment
Temperature .......................................... Min. 0 °C, Max. 40 °C
(Min. 32 °F, Max. 104 °F)
Dimensions (CIPA compliant)
W ..........................................................110.1 mm (4.3 in.)
H ...........................................................63.8 mm (2.5 in.)
D ...........................................................39.9 mm (1.6 in.)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
183
Weight (CIPA compliant)
Including Battery Pack,
Memory Card ........................................Approx. 300 g (approx. 10.6 oz.)
Camera Body Only ...............................Approx. 276 g (approx. 9.7 oz.)
Battery Pack NB-13L
Type:
Nominal Voltage:
Nominal Capacity:
Charging Cycles:
Rechargeable lithium-ion battery
3.6 V DC
1250 mAh
Approx. 300 times
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Battery Charger CB-2LH/CB-2LHE
Rated Input:
Rated Output:
Charging Time:
100 – 240 V AC (50/60 Hz)
0.09 A (100 V) – 0.06 A (240 V)
4.2 V DC, 0.7 A
Approx. 2 hr. 10 min. (when using NB-13L)
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
Compact Power Adapter CA-DC30/CA-DC30E
Rated Input:
Rated Output:
Charging Time:
100 – 240 V AC (50/60 Hz)
0.07 A (100 V) – 0.045 A (240 V)
5.0 V DC, 0.55 A
Approx. 5 hr.* (when charged with NB-13L in the camera)
* Charging time varies considerably depending on the remaining battery level.
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
● The number of shots that can be taken is based on measurement guidelines of the Camera & Imaging Products Association (CIPA).
● Under some shooting conditions, the number of shots and recording time may be less than mentioned above.
● Number of shots/time with a fully charged battery pack.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
184
Index
A
AUTO mode (shooting mode) 21, 33
B
Batteries → Date/time (date/time battery)
Battery pack
C
Compression ratio (image quality) 83
D
Date/time
Defaults → Reset all
E
Editing
Editing or erasing connection
Exposure
F
Face self-timer (shooting mode) 66
Fish-eye effect (shooting mode) 61
Flash
Flash exposure compensation 82
Focusing
Focus range
FUNC. menu
G
H
Handheld night scene (shooting
I
Image quality → Compression ratio
(image quality)
Images
Playback → Viewing
L
M
Menu
Miniature effect (shooting mode) 62
Movies
P
Playback → Viewing
Poster effect (shooting mode) 60
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
185
→ Battery charger,
→ Battery pack
→ Printing
R
Recording pixels (image size) 50
S
Saving images to a computer 156
Screen
Menu → FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→ Memory cards
Self portrait (shooting mode) 58
Wink self-timer (shooting mode)
Sending images to another camera
Sending images to a smartphone 113
Sending images to Web services 126
Shooting
Shooting date/time → Date/time
Smart Shutter (shooting mode) 64
Smooth skin (shooting mode) 61
Software
Saving images to a computer
Super vivid (shooting mode) 60
T
Toy camera effect (shooting mode)
V
W
Wrist strap → Strap
Z
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
186
Precautions for Wireless Features (Wi-Fi, Bluetooth, or Others)
● Countries and Regions Permitting Wireless Function Use
Use of wireless functions is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating wireless regulations, visit the Canon website to check where use is allowed.
Note that Canon cannot be held liable for any problems arising from wireless function use in other countries and regions.
● Doing any of the following may incur legal penalties:
Altering or modifying the product
Removing the certification labels from the product
● Before goods or technologies in the camera regulated by the Foreign
Exchange and Foreign Trade Act are exported (which includes bringing them outside Japan or showing them to non-residents in
Japan), export or service transaction permission may be required from the Japanese government.
● Because this product includes American encryption items, it falls under
U.S. Export Administration Regulations, and cannot be exported to or brought into a country under U.S. trade embargo.
● Be sure to make notes of the Wi-Fi settings you use.
The wireless settings saved to this product may change or be erased due to incorrect operation of the product, the effects of radio waves or static electricity, or accident or malfunction. Please note that Canon accepts no responsibility for direct or indirect damages or loss of earnings resulting from a degradation or disappearance of content.
● When transferring ownership, disposing of the product, or sending it for repair, restore the default wireless settings by erasing any settings you have entered.
● Canon will not make compensation for damages resulting from loss or theft of the product.
Canon accepts no responsibility for damages or loss resulting from unauthorized access or use of target devices registered on this product due to loss or theft of the product.
● Be sure to use the product as directed in this guide.
Be sure to use the wireless function of this product within the guidelines noted in this guide. Canon accepts no responsibility for damages or loss if the function and product are used in ways other than as described in this guide.
● Do not use the wireless function of this product near medical equipment or other electronic equipment.
Use of the wireless function near medical equipment or other electronic equipment may affect operation of those devices.
Radio Wave Interference Precautions
● This product may receive interference from other devices that emit radio waves. To avoid interference, be sure to use this product as far away as possible from such devices, or avoid using the devices at the same time as this product.
Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
● Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays the results on the screen. Networks you are not authorized to use
(unknown networks) may also be displayed. However, attempting to connect to or using such networks could be regarded as unauthorized access. Be sure to use only networks you are authorized to use, and do not attempt to connect to other unknown networks.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
187
If security settings have not been properly set, the following problems may occur.
● Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and attempt to acquire the data you are sending.
● Unauthorized network access
Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access such as impersonation (where someone assumes an identity to gain access to unauthorized information) or springboard attacks (where someone gains unauthorized access to your network as a springboard to cover their tracks when infiltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security settings.
Third-Party Software
● expat.h
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
OR OTHER DEALINGS IN THE SOFTWARE.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
188
Personal Information and Security Precautions
If personal information and/or Wi-Fi security settings, such as passwords, etc., are saved on the camera, please be aware that such information and settings may still remain in the camera.
When transferring the camera to another person, disposing of it, or sending it for repair, be sure to take the following measures to prevent the leakage of such information and settings.
● Erase registered personal information by choosing [Erase Info] in the
Face ID settings.
● Erase registered Wi-Fi security information by choosing [Reset
Settings] in the Wi-Fi settings.
Trademarks and Licensing
● Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
● Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
● App Store, iPhone, and iPad are trademarks of Apple Inc.
● The SDXC logo is a trademark of SD-3C, LLC.
● HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
● Wi-Fi ® , Wi-Fi Alliance ® , WPA™, WPA2™ and Wi-Fi Protected Setup™ are trademarks or registered trademarks of the Wi-Fi Alliance.
● The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners.
● The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
● All other trademarks are the property of their respective owners.
● This device incorporates exFAT technology licensed from Microsoft.
● This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
Disclaimer
● Unauthorized reproduction of this guide is prohibited.
● All measurements based on Canon testing standards.
● Information subject to change without notice, as are product specifications and appearance.
● Illustrations and screenshots in this guide may differ slightly from the actual equipment.
● The above items notwithstanding, Canon cannot be held liable for any loss arising from the use of this product.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wireless Features
Setting Menu
Accessories
Appendix
Index
189
advertisement