TBI Pro RU13 User Guide

Functions

Power on

Power off

In pairing mode

Operations

Long press the MFB for 3 seconds

Long press the MFB for 3.5 seconds

Long press the MFB for 6.5 seconds

Steps To Connect The Bluetooth

Earphone With Cell Phone

2

Answering call

End call

Reject

Short press the MFB one time

Short press the MFB one time

Long press the MFB for 1second

3

Redialing the last number

Cancel/End

Pause, play

4

Volume Buttons x2

Double press the MFB one time

Short press the MFB one time

Increase Vol

& Forward

Decrease Vol

& Rewind

Short Press Vol + Long Press Vol +

Volume + (Press the button one time, the volume will increase one level)

Volume (Press the button one time, the volume will decrease one level)

The Micro USB Charging Port

At low battery before charging

Charge

Duration

When fully charged

1-2 hrs

Short Press Vol Long Press Vol -

Short press the MFB

LED

5

Bluetooth

Searching

1

Long press the MFB button for about 6 Seconds until...

the earphone indicator lights up in red and blue, entering the search state

“Pairing State” is heard and the headset can be searched by other Bluetooth devices

6

Bluetooth

Device

TBI Pro RU13

7 8

Enter Password

0 0 0 0

Turn ON the BLUETOOTH function on the mobile phone to start searching for the device

Congratulations, the connection is successful.

Now you can listen to Music and Communicate

When the Earphone is Charging (Red light stays ON;

After a full charge, Blue light is on)

Remove the headset from the case in its off-state

1 for 2 Multi-Point Function

Connection Steps

2

From the available devices, select “TBI Pro RU13”

3

After successful connection, the blue headphone indicator will flash

If your mobile phone asks for a password, enter 0000

4 1st

Bluetooth

Searching

5 6 1st

Bluetooth

When battery power is insufficient (The Red light keeps flashing twice and with a voice prompt)

NOTE

Keep the connected Earphone around your Mobile Phone.

The maximum distance between the connected devices in line of sight (without blockage) is about 10 meters. Beyond this distance, sound quality may worsen or cause connection loss.

1

Long press the MFB button for about 6 Seconds until...

the earphone indicator lights up in red and blue, entering the search state

7 8

2nd

Bluetooth

Searching

Turn ON the BLUETOOTH function on the 1st mobile phone

9

2nd

Bluetooth

Device

TBI Pro RU13

Long press the earphone MFB until the LED turns red to turn off the Bluetooth earphone.

1st

10

Bluetooth

Searching

Turn OFF BLUETOOTH on the

1st mobile phone

11

1St

Bluetooth

Device

TBI Pro RU13

Remove the headset from the case in its off-state

Repeat Steps 4 and 5 for the 2nd mobile phone Search for available devices and select

“TBI Pro RU13” on the 2nd mobile phone

Turn ON the Bluetooth function on the 1st mobile phone, find the already connected Bluetooth Earphone, click the connection to complete 1 for 2.