BENTAIL LED TV Backlight 9.8ft
Item No.:
BTLS3M5050
Specifications:
· 30 LEDs/M, 60LEDs/M
· Naked PCB Strip,Dropping Glue,Bushing,
Fully Fashioned,LED Tube Strip
· Customized Available
Products features:
· ° 。
Applications:
Advertising lamp boxes, Lighting projects,Home decoration,KTV,Bars and other entertainment places, Hotel , other special lighting occasions
Technological Parameter (per Meter)
Item
Forward Current
Rated Parameter
30LEDs:0.5A
60LEDs:1A
Item
Working Temperature
Rated Parameter
-20~40
℃
Rated Voltage DC5V Storing Temperature 0~+40
℃
Rated Power
LED Quantities
Wavelength
IP Level
30Leds/M:6W
60Leds/M:12W
30LEDs/M,60LEDs/M
Length
LED Type
5M/roll
SMD 5050 RGB
Red: 620 - 630 nm; Blue:460 - 470 nm;Green: 520 - 525 nm
Naked PCB without waterproof,Dropping glue(IP65),Bushing(IP67),Tube+Glue(IP68),Fully
Fashioned Hollow(IP67),Fully Fashioned Solid (IP68)
Notices:
1. The tolerance of power, wavelength and luminous flux is <15%.
2. LED luminous flux,wavelength,color temperature parameters can customized by clients.
Application scenarios:
Drawing of Light Strip Belt Cutting:
50
DC12V
G
R
B
5000
5000
100
DC12V
G
R
B
30 LEDs/M,cutting per 100mm
Installation steps:
1,Wipe your TV back clean and dry up.
2,Tear off the protective adhesive tape in Strip lights.
3,Stick the strip light on the back of the cleaned TV
4,Press the strip down softly at the place without LEDs
5,Get through the power,then enjoy your watching
NOTICE:
Please read the manual of controller earnestly before using,otherwise we wouldn’t response for incorrect operating.