GE 34693 Night Light User Manual

34693 White and 34694 Brushed Nickel LED Color Changing Night

Features

This is a dusk to dawn color-changing LED night light with three modes of operation. The night light will only turn on when the room/area becomes dark and will automatically turn off when the room/area has sufficient amount of light.

1) First Mode: Night Light automatically cycles through all 8 colors. a.

(Scarlet, Azure, Jasmine, Parakeet, Sapphire, Chartreus, Orchid, Lemon)

2) Second Mode: Night Light is set to a selected LED color.

3) Third Mode: Night Light is set to soft white LED.

The night light will only turn on when the room becomes dark. You can use a piece of black electrical tape to cover the photo cell located at the bottom of the night light if the room/area isn’t dark enough for the night light to turn on. Remember to remove the tape when finished or the night light will never turn off.

OPERATING INSTRUCTIONS

1) Plug the night light into a receptacle.

2) The night light will turn on when the room/area becomes dark

3) The night light is preset to turn on in the color changing mode when initially plugged into a receptacle.

4) When the LED color of choice illuminates, press and release the button on the front of the night light. This will stop the cycling and lock in the desired LED color.

5) To cancel out of the color mode, press and release the button on the front of the night light. The night light will change to a soft white LED.

6) To go back to the color changing mode, press and release the button again on the front of the night light.

Note: If you unplug the night light and plug it back in, the night light will turn back on at the last mode setting the night light was in when it was unplugged. To change mode, press and release

the button on the front of the night light.