advertisement
USER GUIDE
(intended for product version 11.0 and higher)
Microsoft® Windows® 10 / 8.1 / 8 / 7 / Vista / Home Server 2011
Click here to display Online help version of this document
Copyright © 2018 by ESET, spol. s r. o.
ESET Internet Security was developed by ESET, spol. s r. o.
For more information visit www.eset.com.
All rights reserved. No part of this documentation may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise without permission in writing from the author.
ESET, spol. s r. o. reserves the right to change any of the described application software without prior notice.
Worldwide Customer Support: www.eset.com/support
REV. 8/23/2018
Contents
Creating exceptions from Personal firewall
FAQ ..............................................................................131
Contents
How to update the ESET Internet
How to allow communication for a
How to enable Parental control for an
How to schedule a weekly computer
6
1. ESET Internet Security
ESET Internet Security represents a new approach to truly integrated computer security. The result is an intelligent system that is constantly on alert for attacks and malicious software that might endanger your computer.
ESET Internet Security is a complete security solution that combines maximum protection and a minimal system footprint. Our advanced technologies use artificial intelligence to prevent infiltration by viruses, spyware, trojan horses, worms, adware, rootkits, and other threats without hindering system performance or disrupting your computer.
Features and benefits
Redesigned user interface
Antivirus and antispyware
Regular updates
ESET LiveGrid®
(Cloud-powered Reputation)
Device control
HIPS functionality
Gamer mode
The user interface in this version has been significantly redesigned and simplified based on the results of usability testing. All GUI wording and notifications have been carefully reviewed and the interface now provides support for right-to-left languages such as Hebrew and Arabic.
Online help is now integrated into ESET Internet Security and offers dynamically updated support content.
Proactively detects and cleans more known and unknown viruses, worms, trojans and rootkits. Advanced heuristics flags even never-before-seen malware, protecting you from unknown threats and neutralizing them before they can do any harm. Web access protection and Anti-Phishing works by monitoring communication between web browsers and remote servers (including SSL). Email client protection provides control of email communication received through the POP3(S) and IMAP(S) protocols.
Regularly updating the detection engine (previously known as "virus signature database") and program modules is the best way to ensure the maximum level of security on your computer.
You can check the reputation of running processes and files directly from
ESET Internet Security.
Automatically scans all USB flash drives, memory cards and CDs/DVDs.
Blocks removable media based on the type of media, manufacturer, size and other attributes.
You can customize the behavior of the system in greater detail; specify rules for the system registry, active processes and programs, and finetune your security posture.
Postpones all pop-up windows, updates or other system-intensive activities to conserve system resources for gaming and other full-screen activities.
A license needs to be active in order for features of ESET Internet Security to be operational. It is recommended that you renew your license several weeks before the license for ESET Internet Security expires.
1.1 What's new in this version?
The new version of ESET Internet Security features the following improvements:
·
One-click logging – You can create advanced logs with just one click.
·
Unified Extensible Firmware Interface (UEFI) Scanner – Adds elevated levels of malware protection by detecting and removing threats that potentially launch before the operating system boots up. For more information click
·
High performance and low system impact – This version is designed for efficient use of system resources, allowing you to enjoy your computer's performance while defending against new types of threats.
·
Reorganized Advanced setup – The ESET LiveGrid® settings were moved to the Detection engine section,
Antispam advanced logging moved to Diagnostic section, etc.
·
Improved screen reader support – ESET Internet Security supports the most popular screen readers (JAWS, NVDA,
Narrator).
·
Drag and drop files scan – You can scan a file or folder by just by dragging it to the marked area.
·
ESET Internet Security is now being installed in a compact format to make the installation faster. After the product is installed and activated, the modules start downloading.
·
ESET Internet Security informs you when you connect to an unprotected wireless network or a network with weak protection.
For more details about the new features in ESET Internet Security please read the following ESET Knowledgebase article:
What's new in this version of ESET home products
1.2 Which product do I have?
ESET offers multiple layers of security with new products from powerful and fast antivirus solution to all-in-one security solution with minimal system footprint:
·
ESET NOD32 Antivirus
·
ESET Internet Security
·
ESET Smart Security Premium
To determine which product you have installed open the main program window (see the Knowledgebase article ) and you will see the name of the product at the top of the window (header).
The table below details features available in each specific product.
Antivirus
Antispyware
Exploit Blocker
Script-Based Attack Protection
Anti-Phishing
Web access protection
HIPS (including Anti-Ransomware protection )
Antispam
Firewall
Connected Home Monitor
Webcam Protection
Network Attack Protection
Botnet Protection
Banking & Payment Protection
Parental Control
Anti-Theft
ESET Password Manager
ESET Secure Data
ESET NOD32 Antivirus ESET Internet Security ESET Smart Security
Premium
7
8
NOTE
Some of the products above may not be available for your language / region.
1.3 System requirements
Your system should meet the following hardware and software requirements for ESET Internet Security to perform optimally:
Processors Supported
Intel® or AMD x86-x64
Supported Operating Systems
Microsoft® Windows® 10
Microsoft® Windows® 8.1
Microsoft® Windows® 8
Microsoft® Windows® 7
Microsoft® Windows® Vista
Microsoft® Windows® Home Server 2011 64-bit
NOTE
ESET Anti-Theft does not support Microsoft Windows Home Servers.
1.4 Prevention
When you work with your computer, and especially when you browse the Internet, please keep in mind that no antivirus system in the world can completely eliminate the risk of
protection and convenience, it is essential that you use your antivirus solution correctly and adhere to several useful rules:
Update regularly
According to statistics from ThreatSense, thousands of new, unique infiltrations are created each day in order to bypass existing security measures and bring profit to their authors – all at the expense of other users. The specialists at the ESET Research Lab analyze these threats on a daily basis and prepare and release updates in order to continually improve the level of protection for our users. To ensure the maximum effectiveness of these updates it is important that updates are configured properly on your system. For more information on how to configure updates, see the
Download security patches
The authors of malicious software often exploit various system vulnerabilities in order to increase the effectiveness of spreading malicious code. With this in mind, software companies watch closely for any vulnerabilities in their applications to appear and release security updates to eliminate potential threats on a regular basis. It is important to download these security updates as they are released. Microsoft Windows and web browsers such as Internet
Explorer are two examples of programs for which security updates are released on a regular schedule.
Back up important data
Malware writers usually do not care about users’ needs, and the activity of malicious programs often leads to total malfunction of an operating system and the loss of of important data. It is important to regularly back up your important and sensitive data to an external source such as a DVD or external hard drive. This will make it far easier and faster to recover your data in the event of system failure.
Regularly scan your computer for viruses
Detection of more known and unknown viruses, worms, trojans and rootkits are handled by the Real-time file system protection module. This means that every time you access or open a file, it is scanned for a malware activity.
We recommend that you run a full Computer scan at least once a month because malware signatures may vary and the detection engine updates itself each day.
Follow basic security rules
This is the most useful and most effective rule of all – always be cautious. Today, many infiltrations require user intervention in order to be executed and distributed. If you are cautious when opening new files, you will save considerable time and effort that would otherwise be spent cleaning infiltrations. Here are some useful guidelines:
·
Do not visit suspicious websites with multiple pop-ups and flashing advertisements.
·
Be careful when installing freeware programs, codec packs, etc. Only use safe programs and only visit safe
Internet websites.
·
Be cautious when opening email attachments, particularly those from mass-mailed messages and messages from unknown senders.
·
Don't use an Administrator account for everyday work on your computer.
9
2. Installation
There are several methods for installing ESET Internet Security on your computer. Installation methods may vary depending on country and means of distribution:
·
(choose a desired language). Live installer itself is a small file; additional files required to install ESET Internet
Security will be downloaded automatically.
·
.exe
file that is larger than the Live installer file and does not require an internet connection or additional files for the completion of installation.
IMPORTANT
Make sure that no other antivirus programs are installed on your computer before you install ESET Internet
Security. If two or more antivirus solutions are installed on a single computer, they may conflict with each other.
We recommend that you uninstall any other antivirus programs on your system. See our ESET Knowledgebase article for a list of uninstaller tools for common antivirus software (available in English and several other languages).
2.1 Live installer
Once you have downloaded the Live installer installation package, double-click the installation file and follow the step-by-step instructions in the installer window.
IMPORTANT
For this type of installation you must be connected to Internet.
10
Select your desired language from the drop-down menu and click Continue . Allow a few moments for installation files to download.
After you accept the End-User License Agreement , you will be prompted to configure ESET LiveGrid® and detection of potentially unwanted applications .
ESET LiveGrid® helps ensure that ESET is immediately and continuously
informed about new threats in order to protect our customers. The system allows you to submit new threats to the
ESET Research Lab where they are analyzed, processed and added to the detection engine.
By default, Enable ESET LiveGrid® feedback system (recommended) is selected, which will activate this feature.
The next step in the installation process is to configure detection of potentially unwanted applications. Potentially unwanted applications are not necessarily malicious, but can negatively affect the behavior of your operating system. See the
Potentially unwanted applications
chapter for more details.
Click Install to start the installation process. It may take a few moments. Click Done to complete the product setup and begin activation process.
NOTE
After the product is installed and activated, the modules start downloading. Protection is being initialized and some features may not be fully functional unless the download is complete.
NOTE
If you have a license that allows you to install other versions of a product, then you can select product according
to your preferences. For more information about features in each specific product click here
.
2.2 Offline installation
Once you launch the offline installation (.exe), the installation wizard will guide you through the setup process.
Select your desired language from the drop-down menu and click Install .
After you accept the End-User License Agreement , you will be prompted to
If you do not have a license yet, select Free trial to test the ESET product for a limited time or select Purchase license . Alternatively, you can select Skip activation to continue installation without activation. You will be prompted for a License Key later.
11
2.2.1 Enter a License Key
The Setup Wizard select the product to install according to your license key and display the product name during installation. To view a list products your license can be used to activate, click Change product . For more information
about the features in each specific product, click here
.
Click Continue and select your preferred settings for ESET LiveGrid® and detection of potentially unwanted applications .
ESET LiveGrid® helps ensure that ESET is immediately and continuously informed about new threats in
order to protect our customers. The system allows you to submit new threats to the ESET Research Lab where they are analyzed, processed and added to the detection engine. Potentially unwanted applications are not necessarily malicious, but can negatively affect the behavior of your operating system. See the
Potentially unwanted applications chapter for more details.
12
Click Install to start the installation process. It may take a few moments. Click Done to complete product setup and begin the activation process.
NOTE
After the product is installed and activated, the modules start downloading. Protection is being initialized and some features may not be fully functional unless the download is complete.
NOTE
If you have a license that allows you select between products, you can install a product according to your
preferences. For more information about the features in each specific product, click here .
For more instructions about installation steps, ESET LiveGrid® and Detection of potentially unwanted applications ,
follow the instructions in the “Live installer”
section.
2.2.2 Use License Manager
After selecting Use License Manager you will be asked for your my.eset.com credentials in a new window. Enter your my.eset.com credentials and click Sign in to use a license in License Manager. Choose a license for activation, click Continue and your ESET Internet Security will be activated.
NOTE
If you do not have a my.eset.com account yet, register by clicking the Create account button.
NOTE
If you forgot your password click I forgot my password and follow the steps on the web page you will be redirected to.
ESET License Manager helps you manage all your ESET licenses. You can easily renew, upgrade or extend your license and see the important license details. First, enter your License Key. After that, you will see the product, associated device, the number of available seats and the expiration date. You can deactivate or rename specific devices. When you click Renew you will be redirected to the online store where you can confirm the purchase and buy the renewal.
If you want to upgrade your license (for example from ESET NOD32 Antivirus to ESET Smart Security Premium) or would like to install an ESET security product on another device, you will be redirected to the online store to complete the purchase.
In ESET License Manager you can also add different licenses, download products to your devices.
2.2.3 Change installation folder
After selecting Change installation folder , you will be prompted to select a location for the installation. By default, the program installs to the following directory:
C:\Program Files\ESET\ESET Internet Security\
Click Browse to change this location (not recommended).
To complete the next installation steps, ESET LiveGrid® and Detection of potentially unwanted applications , follow the instructions in the Live installer section (see
Click Continue and then Install to complete installation.
2.3 Common installation problems
If problems occur during installation, see our list of common installation errors and resolutions to find a solution to your problem.
13
2.4 Product activation
After the installation is complete, you will be prompted to activate your product.
There are several methods available to activate your product. Availability of a particular activation scenario in the activation window may vary depending on country and means of distribution (CD/DVD, ESET web page, etc.):
·
If you purchased a retail boxed version of the product, activate your product using a License Key . The License
Key is usually located inside or on the back side of the product package. The License Key must be entered as supplied for activation to be successful. License Key – a unique string in the format XXXX-XXXX-XXXX-XXXX-
XXXX or XXXX-XXXXXXXX which is used for identification of the license owner and for activation of the license.
·
After selecting Use License Manager
you will be asked for your my.eset.com credentials in a new window.
·
If you would like to evaluate ESET Internet Security before making a purchase, select Free trial . Enter your email address and country to activate ESET Internet Security for a limited time. Your trial license will be emailed to you. Trial licenses can only be activated once per customer.
·
If you do not have a license and would like to buy one, click Purchase license . This will redirect you to the website of your local ESET distributor.
14
2.5 Entering your License key
Automatic updates are important for your security. ESET Internet Security will only receive updates once activated using your License Key .
If you did not enter your License Key after installation, your product will not be activated. You can change your license in the main program window. To do so, click Help and support > Activate License and enter the license data you received with your ESET security product into the Product activation window.
When entering your License key , it is important to type it exactly as it is written:
·
Your License Key is a unique string in the format XXXX-XXXX-XXXX-XXXX-XXXX which is used for identification of the the license owner and activation of the license.
We recommend that you copy and past your License Key from your registration email to ensure accuracy.
2.6 Upgrading to a more recent version
New versions of ESET Internet Security are issued to implement improvements or fix issues that cannot be resolved by automatic updates to program modules. Upgrading to a more recent version can be accomplished in several ways:
1. Automatically, by means of a program update.
Since the program upgrade is distributed to all users and may have an impact on certain system configurations, it is issued after a long testing period to ensure functionality with all possible system configurations. If you need to upgrade to a newer version immediately after its release, use one of the methods below.
2. Manually, in the main program window by clicking Check for updates in the Update section.
3. Manually, by downloading and installing a more recent version over the previous one.
2.7 First scan after installation
After installing ESET Internet Security, a computer scan will start automatically after first successful update in order to check for malicious code.
You can also start a computer scan manually from the main program window by clicking Computer scan > Scan your computer . For more information about computer scans, see the section
15
3. Beginner's guide
This chapter provides an initial overview of ESET Internet Security and its basic settings.
3.1 The main program window
The main program window of ESET Internet Security is divided into two main sections. The primary window on the right displays information that corresponds to the option selected from the main menu on the left.
The following is a description of options within the main menu:
Home – Provides information about the protection status of ESET Internet Security.
Computer scan – Configure and launch a scan of your computer or create a custom scan.
Update – Displays information about detection engine updates.
Tools – Provides access to Log files, Protection statistics, Watch activity, Running processes, Network connections,
Scheduler, ESET SysInspector and ESET SysRescue.
Setup – Select this option to adjust the security level for Computer, Internet, Network protection and Security tools.
Help and support – Provides access to help files, the ESET Knowledgebase , the ESET website, and links to submit support request.
16
The Home screen contains important information about the current protection level of your computer. The status window displays frequently used features in ESET Internet Security. Information about the most recent update and your program’s expiration date is also found here.
The green icon and green Maximum protection status indicates that maximum protection is ensured.
What to do if the program doesn't work properly?
If an active protection module is working properly its protection status icon will be green. A red exclamation point or orange notification icon indicates that maximum protection is not ensured. Additional information about the protection status of each module, as well as suggested solutions for restoring full protection, will be displayed under Home . To change the status of individual modules, click Setup and select the desired module.
The red icon and red Maximum protection is not ensured status indicate critical problems.
There are several reasons this status may be displayed, for example:
·
Product not activated – You can activate ESET Internet Security from Home by clicking Activate product or
Buy now under Protection status .
·
Detection engine is out of date – This error will appear after several unsuccessful attempts to update the virus signature database. We recommend that you check the update settings. The most common reason for this error is incorrectly entered
or incorrectly configured connection settings .
·
Antivirus and antispyware protection disabled – You can re-enable antivirus and antispyware protection by clicking Enable antivirus and antispyware protection .
·
ESET Firewall disabled – This problem is also indicated by a security notification next to the Network item on your desktop. You can re-enable network protection by clicking Enable firewall .
·
License expired – This is indicated by a red protection status icon. The program is not able to update after your license expires. Follow the instructions in the alert window to renew your license.
The orange icon indicates limited protection. For example, there might be a problem updating the program or your license may be nearing its expiration date.
There are several reasons this status may be displayed, for example:
·
Gamer mode active – Enabling
Gamer mode is a potential security risk. Enabling this feature disables all
pop-up windows and stops any scheduled tasks.
·
Your license will expire soon – This is indicated by the protection status icon displaying an exclamation
17
18 point next to the system clock. After your license expires, the program will not be able to update and the
Protection status icon will turn red.
If you are unable to solve a problem using the suggested solutions, click Help and support to access help files or search the ESET Knowledgebase . If you still need assistance, you can submit a support request. ESET Customer Care will respond quickly to your questions and help find a resolution.
3.2 Updates
Updating the detection engine and updating program components is an important part of protecting your system against malicious code. Pay careful attention to their configuration and operation. In the main menu, click Update and then click Check for updates to check for a detection engine update.
If the License key was not entered during the activation of ESET Internet Security you will be prompted for them at this point.
The Advanced setup window (click Setup in the main menu and then click Advanced setup , or press F5 on your keyboard) contains additional update options. To configure advanced update options such as update mode, proxy server access and LAN connections, click on particular tab in the Update window.
3.3 Trusted zone setup
It is necessary to configure Trusted zones to protect your computer in a network environment. You can allow other users to access your computer by configuring Trusted zones to allow sharing. Click Setup > Network protection >
Connected networks and click the link below the connected network. A window will display options allowing you to choose the desired protection mode of your computer in the network.
Trusted zone detection occurs after ESET Internet Security installation and whenever your computer connects to a new network. Therefore, there is usually no need to define Trusted zones. By default, when a new zone is detected a dialog window will prompt you to set the protection level for that zone.
19
WARNING
An incorrect Trusted zone configuration may pose a security risk to your computer.
NOTE
By default, workstations from a Trusted zone are granted access to shared files and printers, have incoming RPC communication enabled and have remote desktop sharing available.
For more details about this feature, read the following ESET Knowledgebase article:
New network connection detected in ESET Smart Security
3.4 Anti-Theft
To protect your computer in case of a loss or theft, choose from the following options to register your computer with ESET Anti-Theft.
1. After a successful activation click Enable Anti-Theft to activate ESET Anti-Theft features for the computer you just registered.
2. If you see the ESET Anti-Theft is available message in the Home pane of ESET Internet Security, consider activating this feature for your computer. Click Enable ESET Anti-Theft to register your computer with ESET Anti-
Theft.
3. From the main program window click Setup > Security tools.
Click instructions in the pop-up window.
next to ESET Anti-Theft and follow the
20
NOTE
ESET Anti-Theft does not support Microsoft Windows Home Servers.
For more instructions about ESET Anti-Theft computer association and see How to add a new device .
3.5 Parental control tools
If you have already enabled Parental control in ESET Internet Security, you must also configure Parental control for desired user accounts in order for Parental control to function properly.
When Parental controls are active but user accounts have not been configured, Parental control is not set up will be displayed in the Home pane of the main program window. Click Set up rules and refer to the
chapter for instructions on how to create specific restrictions for your children to protect them from potentially offensive material.
21
4. Working with ESET Internet Security
ESET Internet Security setup options allow you to adjust the protection levels of your computer and network.
22
The Setup menu is divided into the following sections:
Computer protection
Internet protection
Network protection
Security tools
Click a component to adjust advanced settings for the corresponding protection module.
Computer protection setup allows you to enable or disable the following components:
·
Real-time file system protection – All files are scanned for malicious code when they are opened, created, or run on your computer.
·
HIPS – The
HIPS system monitors the events within the operating system and reacts to them according to a
customized set of rules.
·
Gamer mode – Enables or disables
Gamer mode . You will receive a warning message (potential security risk)
and the main window will turn orange after enabling Gamer mode.
·
Webcam Protection – Controls processes and applications that access computer connected camera. For more
Internet protection setup allows you to enable or disable the following components:
·
Web access protection – If enabled, all traffic through HTTP or HTTPS is scanned for malicious software.
·
Email client protection – Monitors communication received through POP3 and IMAP protocol.
·
Antispam protection – Scans unsolicited email, i.e., spam.
·
Anti-Phishing protection – Filters websites suspected of distributing content intended to manipulate users into submitting confidential information.
The Network protection section allows you to enable or disable the
, Network attack protection (IDS) and
Security tools setup allows you adjust following modules:
·
·
·
Parental control lets you block webpages that may contain potentially offensive material. In addition, parents can prohibit access to more than 40 pre-defined website categories and over 140 subcategories.
To re-enable a disabled security component, click the slider so that it displays a green check mark
NOTE
When disabling protection using this method, all disabled protection modules will be enabled after a computer restart.
.
Additional options are available at the bottom of the setup window. Use the Advanced setup link to setup more detailed parameters for each module. Use Import/Export settings to load setup parameters using an .xml
configuration file, or to save your current setup parameters to a configuration file.
23
4.1 Computer protection
Click Computer Protection from the Setup window to see an overview of all protection modules. To turn off individual modules temporarily, click . Note that this may decrease the protection level of your computer.
Click next to a protection module to access advanced settings for that module.
Click > Edit exclusions next to Real-time file system protection
to open the Exclusion setup window, which
allows you to exclude files and folders from scanning.
24
Pause Antivirus and antispyware protection – Disables all antivirus and antispyware protection modules. When you disable protection a window will open where you can determine how long protection is disabled using the Time interval drop-down menu. Click Apply to confirm.
4.1.1 Detection engine
Antivirus protection guards against malicious system attacks by controlling file, email and Internet communication.
If a threat with malicious code is detected, the Antivirus module can eliminate it by first blocking it and then cleaning, deleting or moving it to quarantine.
Scanner options for all protection modules (e.g. Real-time file system protection, Web access protection, ...) allow you to enable or disable detection of the following:
·
Potentially unwanted applications (PUAs) are not necessarily intended to be malicious, but may affect the performance of your computer in a negative way.
Read more about these types of applications in the
.
·
Potentially unsafe applications refers to legitimate commercial software that has the potential to be misused for malicious purposes. Examples of potentially unsafe applications include remote access tools, password-cracking applications, and keyloggers (programs recording each keystroke typed by a user). This option is disabled by default.
Read more about these types of applications in the
.
·
Suspicious applications include programs compressed with
or protectors. These types of protectors are often exploited by malware authors to evade detection.
Anti-Stealth technology is a sophisticated system that provides the detection of dangerous programs such as
using ordinary testing techniques.
Exclusions enable you to exclude files and folders from scanning. To ensure that all objects are scanned for threats, we recommend only creating exclusions when it is absolutely necessary. Situations where you may need to exclude an object might include scanning large database entries that would slow your computer during a scan or software
that conflicts with the scan. To exclude an object from scanning see Exclusions
.
Enable advanced scanning via AMSI – Microsoft Antimalware Scan Interface tool that allows application developers new malware defenses (Windows 10 only).
25
4.1.1.1 Real-time file system protection
Real-time file system protection controls all antivirus-related events in the system. All files are scanned for malicious code when they are opened, created, or run on your computer. Real-time file system protection is launched at system startup.
26
By default, Real-time file system protection launches at system start-up and provides uninterrupted scanning. In special cases (for example, if there is a conflict with another real-time scanner), real-time protection can be disabled by disengaging Enable Real-time file system protection in Advanced setup under Real-time file system protection > Basic .
Media to scan
By default, all types of media are scanned for potential threats:
Local drives – Controls all system hard drives.
Removable media – Controls CD/DVDs, USB storage, Bluetooth devices, etc.
Network drives – Scans all mapped drives.
We recommend that you use default settings and only modify them in specific cases, such as when scanning certain media significantly slows data transfers.
Scan on
By default, all files are scanned upon opening, creation, or execution. We recommend that you keep these default settings, as they provide the maximum level of real-time protection for your computer:
·
File open – Enables or disables scanning when files are opened.
·
File creation – Enables or disables scanning when files are created.
·
File execution – Enables or disables scanning when files are run.
·
Removable media access – Enables or disables scanning triggered by accessing particular removable media with storage space.
Real-time file system protection checks all types of media and is triggered by various system events such as accessing a file. Using ThreatSense technology detection methods (as described in the
than existing files. For example, you can configure Real-time file system protection to more closely monitor newly created files.
To ensure a minimal system footprint when using real-time protection, files that have already been scanned are not scanned repeatedly (unless they have been modified). Files are scanned again immediately after each detection engine update. This behavior is controlled using Smart optimization . If this Smart optimization is disabled, all files are scanned each time they are accessed. To modify this setting, press F5 to open Advanced setup and expand
Detection engine > Real-time file system protection . Click ThreatSense parameter > Other and select or deselect
Enable Smart optimization .
4.1.1.1.1 Additional ThreatSense parameters
Additional ThreatSense parameters for newly created and modified files
The probability of infection in newly-created or modified files is comparatively higher than in existing files. For this reason, the program checks these files with additional scanning parameters. ESET Internet Security uses advanced heuristics which can detect new threats before the detection engine update is released in combination with signature-based scanning methods. In addition to newly-created files, scanning is also performed on Self-extracting archives (.sfx) and Runtime packers (internally compressed executable files). By default, archives are scanned up to the 10th nesting level, and are checked regardless of their actual size. To modify archive scan settings, deselect
Default archive scan settings .
Additional ThreatSense parameters for executed files
Advanced heuristics on file execution – By default,
system performance.
Advanced heuristics on executing files from removable media – Advanced heuristics emulates code in a virtual environment and evaluates its behavior before the code is allowed to run from removable media.
4.1.1.1.2 Cleaning levels
Real-time protection has three cleaning levels (to access cleaning level settings, click ThreatSense engine parameter setup in the Real-time file system protection section and then click Cleaning ).
No cleaning – Infected files will not be cleaned automatically. The program will display a warning window and allow the user to choose an action. This level is designed for more advanced users who know which steps to take in the event of an infiltration.
Normal cleaning – The program will attempt to automatically clean or delete an infected file based on a predefined action (depending on the type of infiltration). Detection and deletion of an infected file is signaled by a notification the bottom-right corner of the screen. If it is not possible to select the correct action automatically, the program provides other follow-up actions. The same happens when a predefined action cannot be completed.
Strict cleaning – The program will clean or delete all infected files. The only exceptions are the system files. If it is not possible to clean them, the user is prompted to select an action by a warning window.
WARNING
If an archive contains a file or files which are infected, there are two options for dealing with the archive. In standard mode (Normal cleaning), the whole archive would be deleted if all the files it contains are infected files. In Strict cleaning mode, the archive would be deleted if it contains at least one infected file, regardless of the status of the other files in the archive.
27
4.1.1.1.3 When to modify real-time protection configuration
Real-time protection is the most essential component of maintaining a secure system. Always be careful when modifying its parameters. We recommend that you only modify its parameters in specific cases.
After installing ESET Internet Security, all settings are optimized to provide the maximum level of system security for users. To restore default settings, click next to each tab in the window ( Advanced setup > Detection engine >
Real-time file system protection ).
4.1.1.1.4 Checking real-time protection
To verify that real-time protection is working and detecting viruses, use a test file from eicar.com. This test file is a harmless file detectable by all antivirus programs. The file was created by the EICAR company (European Institute for Computer Antivirus Research) to test the functionality of antivirus programs. The file is available for download at http://www.eicar.org/download/eicar.com
NOTE
Before performing a real-time protection check, it is necessary to disable the
firewall . If the firewall is enabled,
it will detect the file and prevent test files from downloading.
28
4.1.1.1.5 What to do if real-time protection does not work
In this chapter, we describe problems that may arise when using real-time protection and how to troubleshoot them.
Real-time protection is disabled
If real-time protection was inadvertently disabled by a user, it needs to be reactivated. To reactivate real-time protection, navigate to Setup in the main program window and click Computer protection > Real-time file system protection .
If real-time protection is not initiated at system startup, it is usually because Enable Real-time file system protection is disabled. To make sure this option is enabled, navigate to Advanced setup ( F5 ) and click Detection engine > Real-time file system protection .
If Real-time protection does not detect and clean infiltrations
Make sure that no other antivirus programs are installed on your computer. If two antivirus programs are installed at the same time, they may conflict with each other. We recommend that you uninstall any other antivirus programs on your system before installing ESET.
Real-time protection does not start
If real-time protection is not initiated at system startup (and Enable Real-time file system protection is enabled), it may be due to conflicts with other programs. For assistance resolving this issue, please contact ESET Customer Care.
4.1.1.2 Computer scan
The on-demand scanner is an important part of your antivirus solution. It is used to perform scans of files and folders on your computer. From a security standpoint, it is essential that computer scans are performed regularly as part of routine security measures not just when an infection is suspected. We recommend that you perform regular
when they are written to the disk. This can happen if Real-time file system protection is disabled at the time, the detection engine is obsolete or the file is not detected as a virus when it is saved to the disk.
Two types of Computer scan are available. Scan your computer quickly scans the system without the need to specify scan parameters. Custom scan allows you to select from predefined scan profiles designed to target specific locations, as well as choose specific scan targets.
Scan your computer
Scan your computer allows you to quickly launch a computer scan and clean infected files with no need for user intervention. The advantage of Scan your computer is it is easy to operate and does not require detailed scanning configuration. This scan checks all files on local drives and automatically cleans or deletes detected infiltrations. The cleaning level is automatically set to the default value. For more detailed information on types of cleaning, see
You can also use the Drag and drop scan feature to scan a file or folder manually by clicking the file or folder, moving the mouse pointer to the marked area while keeping the mouse button pressed, and then releasing it. After that, the application is moved to the foreground.
The following scanning options are available under Advanced scans :
Custom scan
Custom scan lets you specify scanning parameters such as scan targets and scanning methods. The advantage of
Custom scan is the ability to configure the parameters in detail. Configurations can be saved to user-defined scan profiles, which can be useful if scanning is repeatedly performed with the same parameters.
Removable media scan
Similar to Scan your computer – quickly launch a scan of removable media (such as CD/DVD/USB) that are currently connected to the computer. This may be useful when you connect a USB flash drive to a computer and want to scan its contents for malware and other potential threats.
This type of scan can be also initiated by clicking Custom scan , selecting Removable media from the Scan targets drop-down menu and clicking Scan .
Repeat last scan
Allows you to quickly launch the previously performed scan using the same settings it was run with.
See
Scan progress for more information about the scanning process.
NOTE
We recommend that you run a computer scan at least once a month. Scanning can be configured as a scheduled task from Tools > More tools > Scheduler
. How do I schedule a weekly computer scan?
4.1.1.2.1 Custom scan launcher
You can use the Customer Scan to scan specific parts of a disk, rather than the entire disk. To do so, click Advanced scans > Custom scan and select an option from the Scan targets drop-down menu, or select specific targets from the folder (tree) structure.
The Scan targets drop-down menu allows you to select predefined scan targets.
·
By profile settings – Selects targets specified by the selected scan profile.
·
Removable media – Selects diskettes, USB storage devices, CD/DVD.
·
Local drives – Selects all system hard drives.
·
Network drives – Selects all mapped network drives.
·
No selection – Cancels all selections.
To quickly navigate to a scan target or add a target folder or file(s), enter the target directory in the blank field below the folder list. This is only possible if no targets are selected in the tree structure and the Scan targets menu is set to No selection .
29
30
You can configure cleaning parameters for the scan under Advanced setup > Detection engine > On-demand scan >
ThreatSense parameters > Cleaning. To run a scan with no cleaning action, select Scan without cleaning . Scan history is saved to the scan log.
When Ignore exclusions is selected, files with extensions that were previously excluded from scanning will be scanned with no exception.
You can choose a profile from the Scan profile drop-down menu to be used when scanning specific targets. The default profile is Smart scan . There are two more pre-defined scan profiles called In-depth scan and Context menu scan . These scan profiles use different
ThreatSense parameters . The available options are described in
Advanced setup > Detection engine > Malware scans > On-demand scan >
.
Click Scan to execute the scan using the custom parameters that you have set.
Scan as Administrator allows you to execute the scan under the Administrator account. Use this if the current user doesn't have privileges to access the files you want to scan. This button is not available if the current user cannot call UAC operations as Administrator.
NOTE
You can view the computer scan log when a scan completes by clicking Show log .
4.1.1.2.2 Scan progress
The scan progress window shows the current status of the scan and information about the number of files found that contain malicious code.
NOTE
It is normal that some files, such as password protected files or files being exclusively used by the system
(typically pagef ile.sys
and certain log files), cannot be scanned. More details can be found in our knowledgebase article .
Scan progress – The progress bar shows the status of already-scanned objects compared to objects still waiting be scanned. The scan progress status is derived from the total number of objects included in scanning.
Target – The name of the currently scanned object and its location.
Threats found – Shows the total number of scanned files, threats found and threats cleaned during a scan.
Pause – Pauses a scan.
Resume – This option is visible when scan progress is paused. Click Resume to continue scanning.
Stop – Terminates the scan.
Scroll scan log – If enabled, the scan log will scroll down automatically as new entries are added so that the most recent entries are visible.
NOTE
Click the magnifier or arrow to show details about the scan that is currently running. You can run another parallel scan by clicking Scan your computer or Custom scan .
Action after scan – Triggers a scheduled shutdown, reboot or sleep when the computer scan finishes. Once the scan has finished, a shutdown confirmation dialog window will open with a 60 second timeout.
31
32
4.1.1.2.3 Scan profiles
Your preferred scan parameters can be saved for future scanning. We recommend that you create a different profile
(with various scan targets, scan methods and other parameters) for each regularly used scan.
To create a new profile, open the Advanced setup window (F5) and click Detection engine > Malware scans > Ondemand scan > List of profiles . The Profile manager window includes the Selected profile drop-down menu that lists existing scan profiles and the option to create a new one. To help you create a scan profile to fit your needs, see the
ThreatSense engine parameters setup section for a description of each parameter of the scan setup.
NOTE
Suppose that you want to create your own scan profile and the Scan your computer configuration is partially suitable, but you don’t want to scan runtime packers or potentially unsafe applications and you also want to apply Strict cleaning . Enter the name of your new profile in the Profile manager window and click Add . Select your new profile from the Selected profile drop-down menu and adjust the remaining parameters to meet your requirements and click OK to save your new profile.
4.1.1.2.4 Computer scan log
The computer scan log gives you general information about the scan such as:
·
Time of completion
·
Total scanning time
·
Number of threats found
·
Number of scanned objects
·
Scanned disk, folders and files
·
Date and time of scan
·
Version of detection engine
4.1.1.3 Idle-state scan
Enable Idle-state scanning – This will perform a full computer scan when your computer is not in use.
By default, the idle-state scanner will not run when the computer (notebook) is operating on battery power. You can override this setting with the Run even if computer is powered from battery feature.
Turn on Enable logging to record a computer scan output in the
Log files section (from the main program window
click Tools > More tools > Log files and then select Computer scan from the Log drop-down menu).
Idle-state detection will run when your computer is in the following states:
·
Turned off screen or screen saver
·
Computer lock
·
User logoff
scanner.
4.1.1.4 Startup scan
By default the automatic startup file check will be performed on system startup and during detection engine updates. This scan is dependent upon the
Scheduler configuration and tasks .
The startup scan options is part of a System startup file check scheduler task. To modify its settings, navigate to
Tools > Scheduler , click on Automatic startup file check and then Edit . In the last step, the
Automatic startup file check window will appear (see the following chapter for more details).
For detailed instructions about Scheduler task creation and management, see Creating new tasks
.
4.1.1.4.1 Automatic startup file check
When creating a System startup file check scheduled task, you have several options to adjust the following parameters:
The Commonly used files drop-down menu specifies the scan depth for files run at system startup based on secret sophisticated algorithm. Files are arranged in descending order according to the following criteria:
·
All registered files (most files scanned)
·
Rarely used files
·
Commonly used files
·
Frequently used files
·
Only the most frequently used files (least files scanned)
Two specific groups are also included:
·
Files run before user logon – Contains files from locations that may be accessed without the user being logged in (includes almost all startup locations such as services, browser helper objects, winlogon notify, Windows scheduler entries, known dll's, etc.).
·
Files run after user logon - Contains files from locations that may only be accessed after a user has logged in
(includes files that are only run by a specific user, typically files in
HKEY_CURRENT_USER\SOFTWARE\Microsof t\Windows\CurrentVersion\Run ).
Lists of files to be scanned are fixed for each aforementioned group.
Scan priority – The level of priority used to determine when a scan will start:
·
When idle – the task will be performed only when the system is idle,
·
Lowest – when the system load is the lowest possible,
·
Lower – at a low system load,
·
Normal – at an average system load.
4.1.1.5 Exclusions
Exclusions enable you to exclude files and folders from scanning. To ensure that all objects are scanned for threats, we recommend only creating exclusions when it is absolutely necessary. However, there are situations where you may need to exclude an object, for example large database entries that would slow your computer during a scan or software that conflicts with the scan.
To exclude an object from scanning:
1. Click Add ,
2. Enter the path to an object or select it in the tree structure.
You can use wildcards to cover a group of files. A question mark (?) represents a single variable character whereas an asterisk (*) represents a variable string of zero or more characters.
Examples
·
If you wish to exclude all files in a folder, type the path to the folder and use the mask “*.*”.
·
To exclude an entire drive including all files and subfolders, use the mask "D:\*".
·
If you want to exclude doc files only, use the mask “*.doc“.
·
If the name of an executable file has a certain number of characters (and characters vary) and you only know the first one for sure (say “D”), use the following format: “D????.exe”. Question marks replace the missing
(unknown) characters.
33
34
NOTE
A threat within a file will not be detected by the Real-time file system protection module or Computer scan module if a file meets the criteria for exclusion from scanning.
Columns
Path – Path to excluded files and folders.
Threat – If there is a name of a threat next to an excluded file, it means that the file is only excluded for the given threat, not completely. If that file becomes infected later with other malware, it will be detected by the antivirus module. This type of exclusion can only be used for certain types of infiltrations and it can be created either in the threat alert window reporting the infiltration (click Show advanced options and then select Exclude from detection ), or by clicking Tools > More tools > Quarantine and then right-clicking the quarantined file and selecting Restore and exclude from detection from the context menu.
Control elements
Add – Excludes objects from detection.
Edit – Enables you to edit selected entries.
Remove – Removes selected entries.
4.1.1.6 ThreatSense parameters
ThreatSense is comprised of many complex threat detection methods. This technology is proactive, which means it also provides protection during the early spread of a new threat. It uses a combination of code analysis, code emulation, generic signatures and virus signatures which work in concert to significantly enhance system security.
The scanning engine is capable of controlling several data streams simultaneously, maximizing efficiency and detection rate. ThreatSense technology also successfully eliminates rootkits.
ThreatSense engine setup options allow you to specify several scan parameters:
·
File types and extensions that are to be scanned
·
The combination of various detection methods
·
Levels of cleaning, etc.
To enter the setup window, click ThreatSense parameters in the Advanced setup window for any module that uses
ThreatSense technology (see below). Different security scenarios may require different configurations. With this in mind, ThreatSense is individually configurable for the following protection modules:
·
Real-time file system protection
·
Idle-state scanning
·
Startup scan
·
Document protection
·
Email client protection
·
Web access protection
·
Computer scan
ThreatSense parameters are highly optimized for each module, their modification can significantly influence system operation. For example, changing parameters to always scan runtime packers, or enabling advanced heuristics in the
Real-time file system protection module could result in system slow-down (normally, only newly-created files are scanned using these methods). We recommend that you leave the default ThreatSense parameters unchanged for all modules except Computer scan.
Objects to scan
This section allows you to define which computer components and files will be scanned for infiltrations.
Operating memory – Scans for threats that attack the operating memory of the system.
Boot sectors – Scans boot sectors for the presence of viruses in the master boot record.
Email files – The program supports the following extensions: DBX (Outlook Express) and EML.
Archives – The program supports the following extensions: ARJ, BZ2, CAB, CHM, DBX, GZIP, ISO/BIN/NRG, LHA,
MIME, NSIS, RAR, SIS, TAR, TNEF, UUE, WISE, ZIP, ACE, and many others.
Self-extracting archives – Self-extracting archives (SFX) are archives that can extract themselves.
Runtime packers – After being executed, runtime packers (unlike standard archive types) decompress in memory.
In addition to standard static packers (UPX, yoda, ASPack, FSG, etc.), the scanner is able to recognize several additional types of packers through the use of code emulation.
Scan options
Select the methods used when scanning the system for infiltrations. The following options are available:
Heuristics – A heuristic is an algorithm that analyzes the (malicious) activity of programs. The main advantage of this technology is the ability to identify malicious software which did not exist, or was not covered by the previous virus signatures database. The disadvantage is a (very small) probability of false alarms.
Advanced heuristics/DNA signatures – Advanced heuristics are a unique heuristic algorithm developed by ESET, optimized for detecting computer worms and trojan horses and written in high-level programming languages. The use of advanced heuristics greatly increases the threat detection capabilities of ESET products. Signatures can reliably detect and identify viruses. Utilizing the automatic update system, new signatures are available within a few hours of a threat discovery. The disadvantage of signatures is that they only detect viruses they know (or slightly modified versions of these viruses).
Grayware (or PUA - a Potentially Unwanted Application) is a broad category of software, whose intent is not as unequivocally malicious as with other types of malware, such as viruses or trojan horses. It may however install additional unwanted software, change the behavior of the digital device, or perform activities not approved or expected by the user.
Categories that may be considered grayware include: advertising display software, download wrappers, various browser toolbars, software with misleading behavior, bundleware, trackware, registry cleaners (Windows operating systems only) or any other borderline software, or software that uses illicit or at least unethical business practices
(despite appearing legitimate) and might be deemed undesirable by an end user who became aware of what the software would do if allowed to install.
35
36
A Potentially Unsafe Application is one that is in itself legitimate (possibly commercial) software but which might be misused by an attacker. Detection of these types of application can be enabled or disabled by users of ESET software.
There are some situations where a user may feel that the benefits of a potentially unwanted application outweigh the risks. For this reason, ESET assigns such applications a lower-risk category compared to other types of malicious software, such as trojan horses or worms.
Warning - Potentially unwanted application found
When a potentially unwanted application is detected, you can decide which action to take:
1.
Clean/Disconnect : This option ends the action and prevents the PUA from entering your system.
You will see the Disconnect option for PUA notifications during download from a website and the Clean option for notifications for a file on disk.
2.
Ignore : This option allows a PUA to enter your system.
3.
Exclude from detection : To allow the detected file that is already on the computer to run in the future without interruption, click Advanced options , select the check box next to Exclude from detection and click
Ignore .
4.
Exclude signature from detection : To allow all files identified by a specific detection name (signature) to run on your computer in the future without interruption (from existing files or web download), click Advanced options , select the check box next to Exclude signature from detection and click Ignore . If additional detection windows with an identical detection name are displayed immediately afterward, click Ignore to close them (any additional windows are related to a detection that occured before you excluded signature from detection).
Potentially unwanted applications - Settings
While installing your ESET product, you can decide whether to enable detection of potentially unwanted applications, as shown below:
Warning
Potentially unwanted applications may install adware, toolbars, or contain other unwanted and unsafe program features.
These settings can be modified in your program settings at any time. To enable or disable the detection of
Potentially unwanted, unsafe or suspicious applications, follow these instructions:
1. Open your ESET product. How do I open my ESET product?
2. Press the F5 key to access Advanced setup .
3. Click Detection engine (in earlier versions also known as Antivirus or Computer ) and enable or disable options Enable detection of potentially unwanted applications , Enable detection of potentially unsafe applications and Enable detection of suspicious applications according to your preferences. Confirm by clicking OK .
37
38
Potentially unwanted applications - Software wrappers
A software wrapper is a special type of application modification that is used by some file-hosting websites. It is a third-party tool that installs the program you intended to download but adds additional software, such as toolbars or adware. The additional software may also make changes to your web browser’s home page and search settings.
Also, file-hosting websites often do not notify the software vendor or download recipient that modifications have been made, and often hide options to opt out. For these reasons, ESET classifies software wrappers as a type of potentially unwanted application to allow users to accept the download or not.
Potentially unwanted applications - Registry cleaners
Registry cleaners are programs that may suggest that the Windows registry database requires regular maintenance or cleaning. Using a registry cleaner might introduce some risks to your computer system. Additionally, some registry cleaners make unqualified, unverifiable or otherwise unsupportable claims about their benefits and/or generate misleading reports about a computer system based on the results of a "free scan". These misleading claims and reports seek to persuade you to purchase a full version or subscription, usually without allowing you to evaluate the registry cleaner before payment. For these reasons, ESET classifies such programs as PUA and provides you the option to allow or to block them.
Potentially unwanted content
If PUA detection is enabled in your ESET product, websites that have a reputation for promoting PUAs or that have a reputation for misleading users into performing actions that might have negative implications on their system or browsing experience will be blocked as potentially unwanted content. If you receive a notification that a website you are attempting to visit is categorized as potentially unwanted content, you can click Go Back to navigate away from the blocked web page or click Ignore and continue to allow the site to load.
Please see this ESET Knowledgebase article for an updated version of this help page.
Potentially unsafe applications
– Potentially unsafe applications is the classification used for commercial,
legitimate programs such as remote access tools, password-cracking applications and keyloggers (programs that record each keystroke typed by a user). This option is disabled by default.
.
Exclusions
An extension is the part of a file name delimited by a period. An extension defines the type and content of a file.
This section of the ThreatSense parameter setup lets you define the types of files to scan.
Other
When configuring ThreatSense engine parameters setup for a On-demand computer scan, the following options in
Other section are also available:
Scan alternate data streams (ADS) – Alternate data streams used by the NTFS file system are file and folder associations which are invisible to ordinary scanning techniques. Many infiltrations try to avoid detection by disguising themselves as alternate data streams.
Run background scans with low priority – Each scanning sequence consumes a certain amount of system resources.
If you work with programs that place a high load on system resources, you can activate low priority background scanning and save resources for your applications.
Log all objects – If this option is selected, the log file will show all the scanned files, even those not infected. For example, if an infiltration is found within an archive, the log will list also clean files contained within the archive.
Enable Smart optimization – With Smart Optimization enabled, the most optimal settings are used to ensure the most efficient scanning level, while simultaneously maintaining the highest scanning speeds. The various protection modules scan intelligently, making use of different scanning methods and applying them to specific file types. If the Smart Optimization is disabled, only the user-defined settings in the ThreatSense core of the particular modules are applied when performing a scan.
Preserve last access timestamp – Select this option to keep the original access time of scanned files instead of updating them (for example, for use with data backup systems).
Limits
The Limits section allows you to specify the maximum size of objects and levels of nested archives to be scanned:
Object settings
Maximum object size – Defines the maximum size of objects to be scanned. The given antivirus module will then scan only objects smaller than the size specified. This option should only be changed by advanced users who may have specific reasons for excluding larger objects from scanning. Default value: unlimited .
Maximum scan time for object (sec.) – Defines the maximum time value for scanning of an object. If a userdefined value has been entered here, the antivirus module will stop scanning an object when that time has elapsed, regardless of whether the scan has finished. Default value: unlimited .
Archive scan setup
Archive nesting level – Specifies the maximum depth of archive scanning. Default value: 10 .
Maximum size of file in archive – This option allows you to specify the maximum file size for files contained in archives (when they are extracted) that are to be scanned. Default value: unlimited .
NOTE
We do not recommend changing the default values; under normal circumstances, there should be no reason to modify them.
39
40
4.1.1.6.1 Cleaning
The cleaning settings determine the behavior of the scanner while cleaning infected files. There are
.
4.1.1.6.2 File extensions excluded from scanning
An extension is the part of a file name delimited by a period. An extension defines the type and content of a file.
This section of the ThreatSense parameter setup lets you define the types of files to scan.
By default, all files are scanned. Any extension can be added to the list of files excluded from scanning.
Excluding files is sometimes necessary if scanning certain file types prevents the program that is using certain extensions from running properly. For example, it may be advisable to exclude the .edb
, .eml
and .tmp
extensions when using Microsoft Exchange servers.
Using the Add and Remove buttons, you can allow or prohibit the scanning of specific file extensions. To add a new extension to the list, click Add , type the extension into the blank field (for example tmp ) and click OK . When you select Enter multiple values , you can add multiple file extensions delimited by lines, commas or semicolons. When multiple selection is enabled, extensions will be shown in the list. Select an extension in the list and click Remove to delete that extension from the list. If you want to edit a selected extension click Edit .
The special symbol ? (question mark) can be used. The question mark represents any symbol.
NOTE
In order to see the exact extension (if any) of a file in a Windows operating system you have to uncheck the Hide extensions for known file types option at Control Panel > Folder Options > View (tab) and apply this change.
4.1.1.7 An infiltration is detected
Infiltrations can reach the system from various entry points such as webpages, shared folders, via email or from removable devices (USB, external disks, CDs, DVDs, diskettes, etc.).
Standard behavior
As a general example of how infiltrations are handled by ESET Internet Security, infiltrations can be detected using:
·
Real-time file system protection
·
Web access protection
·
Email client protection
·
On-demand computer scan
connection. A notification window is displayed in the notification area at the bottom right corner of the screen. For
more information about cleaning levels and behavior, see Cleaning .
Cleaning and deleting
If there is no predefined action to take for Real-time file system protection, you will be prompted to select an option in the alert window. Usually the options Clean , Delete and No action are available. Selecting No action is not recommended, as this will leave infected files uncleaned. The exception to this is when you are sure that a file is harmless and has been detected by mistake.
Apply cleaning if a file has been attacked by a virus that has attached malicious code to the file. If this is the case, first attempt to clean the infected file in order to restore it to its original state. If the file consists exclusively of malicious code, it will be deleted.
If an infected file is “locked“ or in use by a system process, it will usually only be deleted after it is released
(normally after a system restart).
Multiple threats
If any infected files were not cleaned during Computer scan (or the Cleaning level was set to
No Cleaning ), an alert window prompting you to select actions for those files is displayed. Select actions for the files (actions are set individually for each file in the list) and then click Finish .
Deleting files in archives
In Default cleaning mode, the entire archive will be deleted only if it contains infected files and no clean files. In other words, archives are not deleted if they also contain harmless clean files. Use caution when performing a Strict cleaning scan, with Strict cleaning enabled an archive will be deleted if it contains at least one infected file regardless of the status of other files in the archive.
41
If your computer is showing signs of a malware infection, e.g., it is slower, often freezes, etc., we recommend that you do the following:
·
Open ESET Internet Security and click Computer scan
·
Click Scan your computer (for more information, see
)
·
After the scan has finished, review the log for the number of scanned, infected and cleaned files
If you only want to scan a certain part of your disk, click Custom scan and select targets to be scanned for viruses.
4.1.1.8 Document protection
The Document protection feature scans Microsoft Office documents before they are opened, as well as files downloaded automatically by Internet Explorer such as Microsoft ActiveX elements. Document protection provides a layer of protection in addition to Real-time file system protection, and can be disabled to enhance performance on systems that do not handle a high number of Microsoft Office documents.
To activate Document protection, open the Advanced setup window (press F5 ) > Detection engine > Malware scans
> Document protection and click the Integrate into system switch.
NOTE
This feature is activated by applications that use the Microsoft Antivirus API (for example, Microsoft Office 2000 and higher, or Microsoft Internet Explorer 5.0 and higher).
4.1.2 Removable media
ESET Internet Security provides automatic removable media (CD/DVD/USB/...) scanning. This module allows you to scan an inserted media. This may be useful if the computer administrator wishes to prevent the users from using removable media with unsolicited content.
Action to take after inserting removable media - Select the default action that will be performed when a removable media device is inserted into the computer (CD/DVD/USB). If Show scan options is selected, a notification will display which allows you to choose a desired action:
·
Do not scan – No action will be performed and the New device detected window will be closed.
·
Automatic device scan – An on-demand computer scan of the inserted removable media device will be performed.
·
Show scan options – Opens the Removable media setup section.
When a removable media is inserted, following dialog will shown:
42
Scan now – This will trigger scan of removable media.
Scan later – Scan of removable media will be postponed.
Setup – Opens the Advanced setup.
Always use the selected option – When selected, same action will be performed when a removable media is inserted another time.
In addition, ESET Internet Security features the Device control functionality, which allows you to define rules for the
section.
4.1.3 Device control
Device control
ESET Internet Security provides automatic device (CD/DVD/USB/...) control. This module allows you to block or adjust extended filters/permissions and define a users ability to access and work with a given device. This may be useful if the computer administrator wants to prevent the use of devices containing unsolicited content.
Supported external devices:
·
Disk Storage (HDD, USB removable disk)
·
CD/DVD
·
USB Printer
·
FireWire Storage
·
Bluetooth Device
·
Smart card reader
·
Imaging Device
·
Modem
·
LPT/COM port
·
Portable Device
·
Microphone
·
All device types
Device control setup options can be modified in Advanced setup (F5) > Device control .
Turning the switch on next to Integrate into system activates the Device control feature in ESET Internet Security; you will need to restart your computer for this change to take effect. Once Device control is enabled, the Rules will
become active, allowing you to open the Rules editor
window.
NOTE
You can create different groups of devices for which different rules will be applied. You can also create only one group of devices for which the rule with action Read/Write or Read only will be applied. This ensures blocking unrecognized devices by Device control when connected to your computer.
If a device blocked by an existing rule is inserted, a notification window will be displayed and access to the device will not be granted.
Webcam Protection
Turning the switch on next to Integrate into system activates the Webcam Protection feature in ESET Internet
Security. Once Webcam Protection is enabled, the Rules will become active, allowing you to open the
window.
43
4.1.3.1 Device control rules editor
The Device control rules editor window displays existing rules and allows for precise control of external devices that users connect to the computer.
44
Particular devices can be allowed or blocked per user or user group and based on additional device parameters that can be specified in the rule configuration. The list of rules contains several descriptions of a rule such as name, type of external device, action to perform after connecting an external device to your computer and log severity.
Click Add or Edit to manage a rule. Click Copy to create a new rule with predefined options used for another selected rule. XML strings displayed when clicking a rule can be copied to the clipboard to help system administrators to export/import these data and use them, for example in ESET Remote Administrator.
By pressing CTRL and clicking, you can select multiple rules and apply actions, such as deleting or moving them up or down the list, to all selected rules. The Enabled check box disables or enables a rule; this can be useful if you don't wish to delete a rule permanently in case you wish to use it in the future.
The control is accomplished by rules that are sorted in the order determining their priority, with higher priority rules on top.
Log entries can be viewed from the main window of ESET Internet Security in Tools > More tools >
The Device control log records all occurrences where Device control is triggered.
4.1.3.2 Adding Device control rules
A Device control rule defines the action that will be taken when a device meeting the rule criteria is connected to the computer.
Enter a description of the rule into the Name field for better identification. Click the switch next to Rule enabled to disable or enable this rule; this can be useful if you don't want to delete the rule permanently.
Device type
Choose the external device type from the drop-down menu (Disk storage/Portable device/Bluetooth/FireWire/...).
Device type information is collected from the operating system and can be seen in the system Device manager if a device is connected to the computer. Storage devices include external disks or conventional memory card readers connected via USB or FireWire. Smart card readers include all readers of smart cards with an embedded integrated circuit, such as SIM cards or authentication cards. Examples of imaging devices are scanners or cameras. Because these devices only provide information about their actions and do not provide information about users, they can only be blocked globally.
Action
Access to non-storage devices can either be allowed or blocked. In contrast, rules for storage devices allow you to select one of the following rights settings:
·
Read/Write – Full access to the device will be allowed.
·
Block – Access to the device will be blocked.
·
Read Only – Only read access to the device will be allowed.
·
Warn – Each time that a device is connected, the user will be notified if it is allowed/blocked, and a log entry will be made. Devices are not remembered, a notification will still be displayed upon subsequent connections of the same device.
Note that not all Actions (permissions) are available for all device types. If it is a device of storage type, all four
Actions are available. For non-storage devices, there are only three Actions available (for example Read Only is not available for Bluetooth, therefore Bluetooth devices can only be allowed, blocked or warned).
45
Criteria type
– Select Device group or Device.
Additional parameters shown below can be used to fine-tune rules and tailor them to devices. All parameters are case-insensitive:
·
Vendor – Filter by vendor name or ID.
·
Model – The given name of the device.
·
Serial – External devices usually have their own serial numbers. In the case of a CD/DVD, this is the serial number of the given media, not the CD drive.
NOTE
If these parameters are undefined, the rule will ignore these fields while matching. Filtering parameters in all text fields are case-insensitive and no wildcards (*, ?) are supported.
NOTE
To view information about a device, create a rule for that type of device, connect the device to your computer and then check the device details in the
Logging severity
ESET Internet Security saves all important events in a log file, which can be viewed directly from the main menu.
Click Tools > Log files and then select Device control from the Log drop-down menu.
·
Always – Logs all events.
·
Diagnostic – Logs information needed to fine-tune the program.
·
Information – Records informative messages, including successful update messages, plus all records above.
·
Warning – Records critical errors and warning messages.
·
None – No logs will be recorded.
Rules can be limited to certain users or user groups by adding them to the User list :
·
Add – Opens the Object types: Users or Groups dialog window that allows you to select desired users.
·
Remove – Removes the selected user from the filter.
NOTE
All devices can be filtered by user rules, (for example imaging devices do not provide information about users, only about actions).
4.1.3.3 Webcam protection rules editor
This window displays existing rules and allows for control of applications and processes that access your computer's web camera based on the action you have taken.
The following actions are available:
·
Block access
·
Ask
·
Allow access
4.1.4 Host-based Intrusion Prevention System (HIPS)
WARNING
Changes to HIPS settings should only be made by an experienced user. Incorrect configuration of HIPS settings can lead to system instability.
46
The Host-based Intrusion Prevention System (HIPS) protects your system from malware and unwanted activity attempting to negatively affect your computer. HIPS utilizes advanced behavioral analysis coupled with the detection capabilities of network filtering to monitor running processes, files and registry keys. HIPS is separate from Real-time file system protection and is not a firewall; it only monitors processes running within the operating system.
HIPS settings can be found under Advanced setup (F5) > Detection engine > HIPS > Basic . The HIPS state
(enabled/disabled) is shown in the ESET Internet Security main program window, under Setup > Computer protection .
ESET Internet Security uses the built-in Self-defense technology as a part of HIPS to prevent malicious software from corrupting or disabling your antivirus and antispyware protection. Self-defense protects crucial system and ESET's processes, registry keys and files from being tampered with.
Enable Protected Service – Enables kernel protection (Windows 8.1, 10).
Advanced memory scanner works in combination with Exploit Blocker to strengthen protection against malware that has been designed to evade detection by antimalware products through the use of obfuscation or encryption.
Exploit Blocker is designed to fortify commonly exploited application types such as web browsers, PDF readers, email clients and MS Office components. Exploit blocker is enabled by default. Read more about this type of protection in the
Ransomware shield is another layer of protection that works as a part of HIPS feature. You must have the LiveGrid® reputation system enabled for Ransomware shield to work. Read more about this type of protection
Filtering can be performed in one of four modes:
Automatic mode – Operations are enabled with the exception of those blocked by pre-defined rules that protect your system.
Smart mode – The user will only be notified about very suspicious events.
Interactive mode – User will be prompted to confirm operations.
Policy-based mode – Operations are blocked.
Learning mode – Operations are enabled and a rule is created after each operation. Rules created in this mode can be viewed in the Rule editor, but their priority is lower than the priority of rules created manually or rules created
47
48 in automatic mode. When you select Learning mode from the HIPS Filtering mode drop down menu, the Learning mode will end at setting will become available. Select the time span that you want to engage learning mode for, the maximum duration is 14 days. When the specified duration has passed, you will be prompted to edit the rules created by HIPS while it was in learning mode. You can also choose a different filtering mode, or postpone the decision and continue using learning mode.
Mode set after learning mode expiration – Select the filtering mode that will be used after learning mode expires.
The HIPS system monitors events inside the operating system and reacts accordingly based on rules similar to those used by the Firewall. Click Edit next to Rules to open the HIPS rule management window. In the HIPS rules window you can select, add, edit or remove rules.
In the following example, we will demonstrate how to restrict unwanted behavior of applications:
1. Name the rule and select Block from the Action drop-down menu.
2. Enable the Notify user switch to display a notification any time that a rule is applied.
3. Select at least one operation for which the rule will be applied. In the Source applications window, select All applications from the drop-down menu to apply your new rule to all applications attempting to perform any of the selected application operations on the applications you specified.
4. Select Modify state of another application (all operations are described in product help, which can be accessed by pressing F1).
5. Select Specific applications from the drop-down menu and Add one or several applications you want to protect.
6. Click Finish to save your new rule.
4.1.4.1 Advanced setup
The following options are useful for debugging and analyzing an application's behavior:
Drivers always allowed to load – Selected drivers are always allowed to load regardless of configured filtering mode, unless explicitly blocked by user rule.
Log all blocked operations – All blocked operations will be written to the HIPS log.
Notify when changes occur in Startup applications – Displays a desktop notification each time an application is added to or removed from system startup.
Please see the our Knowledgebase article for an updated version of this help page.
4.1.4.2 HIPS interactive window
If the default action for a rule is set to Ask , a dialog window will be displayed each time that the rule is triggered.
You can choose to Deny or Allow the operation. If you do not choose an action in the given time, a new action is selected based on the rules.
The dialog window allows you to create a rule based on any new action that HIPS detects and then define the conditions under which to allow or deny that action. Settings for the exact parameters can be accessed by clicking
Details . Rules created like this are considered equal to rules created manually, so a rule created from a dialog window can be less specific than the rule that triggered that dialog window. This means that after creating such a rule, the same operation can trigger the same window.
Remember until application quits causes the action ( Allow/Deny ) to be used until a change of rules or filtering mode, a HIPS module update or a system restart. After any of these three actions, temporary rules will be deleted.
49
4.1.4.3 Potential ransomware behavior detected
This interactive window will appear when potential ransomware behavior is detected. You can choose to Deny or
Allow the operation.
50
The dialog window allows you submit the file for analysis or exclude from detection . Click Details to view specific detection parameters.
IMPORTANT
ESET Live Grid must be enabled for Ransomware protection to function properly.
4.1.5 Gamer mode
Gamer mode is a feature for users that demand uninterrupted usage of their software, do not want to be disturbed by pop-up windows, and want to minimize CPU usage. Gamer mode can also be used during presentations that cannot be interrupted by antivirus activity. By enabling this feature, all pop-up windows are disabled and the activity of the scheduler will be stopped completely. System protection still runs in the background but does not demand any user interaction.
You can enable or disable Gamer mode in the main program window under Setup > Computer protection by clicking or next to Gamer mode . Enabling Gamer mode is a potential security risk, so the protection status icon in the taskbar will turn orange and display a warning. You will also see this warning in the main program window where you will see Gamer mode active in orange.
Activate Enable Gamer mode when running applications in full-screen mode automatically under Advanced setup
(F5) > Tools > Gamer mode to have Gamer mode start whenever you initiate a full-screen application and stop after you exit the application.
Activate Disable Gamer mode automatically after to define the amount of time after which Gamer mode will automatically be disabled.
NOTE
If the Firewall is in Interactive mode and Gamer mode is enabled, you might have trouble connecting to the
Internet. This can be problematic if you start a game that connects to the Internet. Normally, you would be asked to confirm such an action (if no communication rules or exceptions have been defined), but user interaction is
disabled in Gamer mode. To allow communication, define a communication rule for any application that might encounter this issue, or use a different
Filtering mode in the Firewall. Keep in mind that if Gamer mode is
enabled and you go to a webpage or application that might be a security risk, it may be blocked without any explanation or warning because user interaction is disabled.
4.2 Internet protection
Web and email configuration can be found in the Setup pane by clicking Internet protection . From here you can access more detailed program settings.
Internet connectivity is a standard feature for personal computers. Unfortunately, the Internet has become the primary medium for distributing malicious code. For this reason it is essential that you carefully consider your Web access protection settings.
Click to open web/email/anti-phishing/antispam protection settings in Advanced setup.
Email client protection provides control of email communications received through POP3 and IMAP protocols. Using the plug-in program for your email client, ESET Internet Security provides control of all communications to and from your email client (POP3, MAPI, IMAP, HTTP).
Antispam protection filters unsolicited email messages.
When you click the gear wheel next to Antispam protection , the following options are available:
Configure...
– Opens advanced settings for Email client antispam protection.
User's
/
– Opens a dialog window where you can add, edit or delete email addresses that are considered safe or unsafe. According to rules defined here, email from these addresses will not be scanned or will be treated as spam. Click User´s Exceptions list to add, edit or delete email addresses that
51
may be spoofed and used for sending spam. Email messages received from addresses listed in the Exception list will always be scanned for spam.
Anti-Phishing protection allows you to block web pages known to distribute phishing content. We strongly recommend that you leave Anti-Phishing enabled.
You can disable the web/email/anti-phishing/antispam protection module temporarily by clicking .
4.2.1 Web access protection
Internet connectivity is a standard feature in a personal computer. Unfortunately, it has also become the main medium for transferring malicious code. Web access protection works by monitoring communication between web browsers and remote servers, and complies with HTTP (Hypertext Transfer Protocol) and HTTPS (encrypted communication) rules.
Access to web pages known to contain malicious content is blocked before content is downloaded. All other webpages are scanned by the ThreatSense scanning engine when they are loaded and blocked if malicious content is detected. Web access protection offers two level of protection, blocking by blacklist and blocking by content.
We strongly recommend that Web access protection is enabled. This option can be accessed from the main window of ESET Internet Security by navigating to Setup > Internet protection > Web access protection .
52
The following options are available in Advanced setup (F5) > Web and email > Web access protection :
·
Web protocols – enables you to configure monitoring for these standard protocols which are used by most
Internet browsers.
·
URL address management – enables you to specify HTTP addresses to block, allow or exclude from checking.
·
ThreatSense parameters – Advanced virus scanner setup – enables you to configure settings such as types of objects to scan (emails, archives, etc.), detection methods for Web access protection etc.
4.2.1.1 Basic
Enable Web access protection – When disabled, Web access protection and Anti-Phishing protection will not run.
Enable advanced scanning of browser scripts – When enabled, all JavaScript programs executed by internet browsers will be checked by antivirus scanner.
NOTE
We strongly recommend you leave Web access protection enabled.
4.2.1.2 Web protocols
By default, ESET Internet Security is configured to monitor the HTTP protocol used by most Internet browsers.
HTTP Scanner setup
In Windows Vista and later, HTTP traffic is always monitored on all ports for all applications. In Windows XP, you can modify the Ports used by HTTP protocol in Advanced setup (F5) > Web and email > Web access protection >
Web protocols . HTTP traffic is monitored on the specified ports for all applications, and on all ports for
applications marked as Web and email clients
.
HTTPS Scanner setup
ESET Internet Security also supports HTTPS protocol checking. HTTPS communication uses an encrypted channel to transfer information between server and client. ESET Internet Security checks communication utilizing the SSL
(Secure Socket Layer), and TLS (Transport Layer Security) protocols. The program will only scan traffic on ports defined in Ports used by HTTPS protocol , regardless of operating system version.
Encrypted communication will be scanned by default. To view the scanner setup, navigate to
setup section, click Web and email > SSL/TLS and enable the Enable SSL/TLS protocol filtering option.
4.2.1.3 URL address management
The URL address management section enables you to specify HTTP addresses to block, allow or exclude from checking.
Websites in the List of blocked addresses will not be accessible unless they are also included in the List of allowed addresses . Websites in the List of addresses excluded from checking are not scanned for malicious code when accessed.
pages. Otherwise only the domains of HTTPS sites that you have visited will be added, the full URL will not be.
If you add a URL address to the List of addresses excluded from filtering , the address will be excluded from scanning. You can also allow or block certain addresses by adding them to the List of allowed addresses or List of blocked addresses .
If you want to block all HTTP addresses except addresses present in the active List of allowed addresses , add * to the active List of blocked addresses .
The special symbols * (asterisk) and ? (question mark) can be used in lists. The asterisk substitutes any character string, and the question mark substitutes any symbol. Particular care should be taken when specifying excluded addresses, because the list should only contain trusted and safe addresses. Similarly, it is necessary to ensure that the symbols * and ? are used correctly in this list. See Add HTTP address / domain mask for how a whole domain including all subdomains can be matched safely. To activate a list, select List active . If you want to be notified when entering an address from the current list, select Notify when applying .
NOTE
URL address management also allows you to block or allow the opening of specific file types during internet browsing. For example, if you do not want executable files to be opened, select the list where you want to block these files from the drop-down menu and then enter the mask "**.exe".
53
54
Control elements
Add – Creates a new list in addition to the predefined ones. This can be useful if you want to logically split different groups of addresses. For example, one list of blocked addresses may contain addresses from an external public blacklist, and a second one may contain your own blacklist, making it easier to update the external list while keeping yours intact.
Edit – Modifies existing lists. Use this to add or remove addresses.
Delete – Deletes existing lists. Only available for lists created with Add , not for default lists.
4.2.2 Email client protection
4.2.2.1 Email clients
Integration of ESET Internet Security with your email client increases the level of active protection against malicious code in email messages. If your email client is supported, integration can be enabled in ESET Internet Security.
When integrated into your email client, the ESET Internet Security toolbar is inserted directly into the email client
(the toolbar for newer versions of Windows Live Mail is not inserted), for more efficient email protection.
Integration settings are located under Advanced setup (F5) > Web and email > Email client protection > Email clients .
Email client integration
Email clients that are currently supported include Microsoft Outlook, Outlook Express, Windows Mail and
Windows Live Mail. Email protection works as a plug-in for these programs. The main advantage of the plug-in is that it is independent of the protocol used. When the email client receives an encrypted message, it is decrypted and sent to the virus scanner. For a complete list of supported email clients and their versions, refer to the following ESET Knowledgebase article .
Even if integration is not enabled, email communication is still protected by the email client protection module
(POP3, IMAP).
Turn on Disable checking upon inbox content change if you experience system slowdown when working with
MS Outlook. This can occur when retrieving email from the Kerio Outlook Connector Store.
Email to scan
Enable email protection by client plugins – When email client protection by email client is disabled, email client protection by protocol filtering will be still enabled.
Received email – Toggles checking of received messages.
Sent email – Toggles checking of sent messages.
Read email – Toggles checking of read messages.
Action to be performed on infected email
No action – If enabled, the program will identify infected attachments, but will leave emails without taking any action.
Delete email – The program will notify the user about infiltration(s) and delete the message.
Move email to the Deleted items folder – Infected emails will be moved automatically to the Deleted items folder.
Move email to folder – Infected emails will be moved automatically to the specified folder.
Folder – Specify the custom folder where you want to move infected emails when detected.
Repeat scan after update – Toggles rescanning after a detection engine update.
Accept scan results from other modules – If this is selected, the email protection module accepts scan results of other protection modules (POP3, IMAP protocols scanning).
NOTE
We recommend that you enable Enable email protection by client plugins and Enable email protection by protocol filtering . These settings are located under Advanced setup ( F5 ) > Web and email > Email client protection > Email protocols ).
4.2.2.2 Email protocols
The IMAP and POP3 protocols are the most widespread protocols used to receive email communication in an email client application. The Internet Message Access Protocol (IMAP) is another Internet protocol for email retrieval.
IMAP has some advantages over POP3, for example, multiple clients can simultaneously connect to the same mailbox and maintain message state information such as whether or not the message has been read, replied to or deleted. ESET Internet Security provides protection for these protocols regardless of the email client used, and without requiring re-configuration of the email client.
The protection module providing this control is automatically initiated at system startup and is then active in memory. IMAP protocol control is performed automatically without the need to reconfigure the email client. By default, all communication on port 143 is scanned, but other communication ports can be added if necessary.
Multiple port numbers must be delimited by a comma.
You can configure IMAP/IMAPS and POP3/POP3S protocol checking in Advanced setup. To access this setting, expand Web and email > Email client protection > Email protocols .
Enable email protection by protocol filtering – Enables checking of email protocols.
In Windows Vista and later, IMAP and POP3 protocols are automatically detected and scanned on all ports. In
Windows XP, only the configured Ports used by the IMAP/POP3 protocol are scanned for all applications, and all ports are scanned for applications marked as
ESET Internet Security also supports the scanning of IMAPS and POP3S protocols, which use an encrypted channel to transfer information between server and client. ESET Internet Security checks communication utilizing the SSL
(Secure Socket Layer), and TLS (Transport Layer Security) protocols. The program will only scan traffic on ports defined in Ports used by IMAPS/POP3S protocol , regardless of operating system version.
Encrypted communication will be scanned by default. To view the scanner setup, navigate to
setup section, click Web and email > SSL/TLS and enable the Enable SSL/TLS protocol filtering option.
55
56
4.2.2.3 Alerts and notifications
Email protection provides control of email communications received through the POP3 and IMAP protocols. Using the plug-in for Microsoft Outlook and other email clients, ESET Internet Security provides control of all communications from the email client (POP3, MAPI, IMAP, HTTP). When examining incoming messages, the program uses all the advanced scanning methods included in the ThreatSense scanning engine. This means that detection of malicious programs takes place even before being matched against the detection engine. Scanning of
POP3 and IMAP protocol communications is independent of the email client used.
The options for this functionality are available in Advanced setup under Web and email > Email client protection >
Alerts and notifications .
After an email has been checked, a notification with the scan result can be appended to the message. You can elect to Append tag messages to received and read email , Append note to the subject of received and read infected email or Append tag messages to sent email . Be aware that on rare occasions tag messages may be omitted in problematic HTML messages or if messages are forged by malware. The tag messages can be added to received and read email, sent email or both. The following options are available:
·
Never – No tag messages will be added.
·
To infected email only – Only messages containing malicious software will be marked as checked (default).
·
To all scanned email – The program will append messages to all scanned email.
Append note to the subject of sent infected email – Disable this if you do not want email protection to include a virus warning in the subject of an infected email. This feature allows for simple, subject-based filtering of infected emails (if supported by your email program). It also increases the level of credibility for the recipient. If an infiltration is detected, it provides valuable information about the threat level of a given email or sender.
Template added to the subject of infected email – Edit this template if you want to modify the subject prefix format of an infected email. This function will replace the message subject "Hello" with a given prefix value "[virus]" to the following format: "[virus] Hello" . The variable %VIRUSNAME% represents the detected threat.
4.2.2.4 Integration with email clients
Integration of ESET Internet Security with email clients increases the level of active protection against malicious code in email messages. If your email client is supported, integration can be enabled in ESET Internet Security.
When integration is activated, the ESET Internet Security toolbar is inserted directly into the email client, allowing for more efficient email protection. Integration settings are available through Setup > Advanced setup > Web and email > Email client protection > Email clients .
Email clients that are currently supported include Microsoft Outlook, Outlook Express, Windows Mail, Windows Live
Mail. For a complete list of supported email clients and their versions, refer to the following ESET Knowledgebase article .
Select the check box next to Disable checking upon inbox content change if you are experiencing a system slowdown when working with your email client. This can occur when retrieving email from the Kerio Outlook
Connector Store.
Even if integration is not enabled, email communication is still protected by the email client protection module
(POP3, IMAP).
4.2.2.4.1 Email client protection configuration
The Email client protection module supports the following email clients: Microsoft Outlook, Outlook Express,
Windows Mail, Windows Live Mail. Email protection works as a plug-in for these programs. The main advantage of the plug-in is that it is independent of the protocol used. When the email client receives an encrypted message, it is decrypted and sent to the virus scanner.
4.2.2.5 POP3, POP3S filter
The POP3 protocol is the most widespread protocol used to receive email communication in an email client application. ESET Internet Security provides protection for this protocol regardless of the email client used.
The protection module providing this control is automatically initiated at system startup and is then active in memory. For the module to work correctly, please make sure it is enabled – POP3 protocol checking is performed automatically without requiring re-configuration of the email client. By default, all communication on port 110 is scanned, but other communication ports can be added if necessary. Multiple port numbers must be delimited by a comma.
Encrypted communication will be scanned by default. To view the scanner setup, navigate to
setup section, click Web and email > SSL/TLS and enable the Enable SSL/TLS protocol filtering option.
In this section, you can configure POP3 and POP3S protocol checking.
Enable POP3 protocol checking – If enabled, all traffic through POP3 is monitored for malicious software.
Ports used by POP3 protocol – A list of ports used by the POP3 protocol (110 by default).
ESET Internet Security also supports POP3S protocol checking. This type of communication uses an encrypted channel to transfer information between server and client. ESET Internet Security checks communications utilizing the SSL (Secure Socket Layer), and TLS (Transport Layer Security) encryption methods.
Do not use POP3S checking – Encrypted communication will not be checked.
Use POP3S protocol checking for selected ports – Check this option to enable POP3S checking only for ports defined in Ports used by POP3S protocol .
Ports used by POP3S protocol – A list of POP3S ports to check (995 by default).
57
4.2.2.6 Antispam protection
Unsolicited email, called spam, ranks among the greatest problems of electronic communication. Spam represents up to 80 percent of all email communication. Antispam protection serves to protect against this problem. Combining several email security principles, the Antispam module provides superior filtering to keep your inbox clean.
One important principle for spam detection is the ability to recognize unsolicited email based on predefined trusted addresses (whitelist) and spam addresses (blacklist). All addresses from your contact list are automatically added to the whitelist, as well as all other addresses you mark as safe.
The primary method used to detect spam is the scanning of email message properties. Received messages are scanned for basic Antispam criteria (message definitions, statistical heuristics, recognizing algorithms and other unique methods) and the resulting index value determines whether a message is spam or not.
Start email client antispam protection automatically – When enabled, antispam protection will be activated automatically on system startup.
Allow advanced antispam scan – Additional antispam data will be downloaded periodically, increasing antispam capabilities and producing better results.
Antispam protection in ESET Internet Security allows you to set different parameters to work with mailing lists.
Options are as follows:
58
Message processing
Add text to email subject – Enables you to add a custom prefix string to the subject line of messages that have been classified as spam. The default is "[SPAM]".
Move messages to spam folder – When enabled, spam messages will be moved to the default junk email folder and also messages reclassified as not spam will be moved to inbox. When you right-click an email message and select ESET Internet Security from the context menu, you can choose from applicable options.
Use the folder – This option moves spam to a user-defined folder.
Mark spam messages as read – Enable this to automatically mark spam as read. It will help you to focus your attention on "clean" messages.
Mark reclassified messages as unread – Messages originally classified as spam, but later marked as “clean" will be displayed as unread.
Spam score logging
– The ESET Internet Security Antispam engine assigns a spam score to every scanned
message. The message will be recorded in the antispam log (
ESET Internet Security > Tools > Log files > Antispam protection ).
·
None – The score from antispam scanning will not be logged.
·
Reclassified and marked as spam – Select this if you want to record a spam score for messages marked as SPAM.
·
All – All messages will be recorded to the log with a spam score.
NOTE
When you click a message in junk email folder, you can choose Reclassify selected messages as NOT spam and the message will be moved to inbox. When you click a message you consider spam in inbox, select Reclassify messages as spam and the message will be moved to junk email folder. You can select multiple messages and perform the action on all of them at the same time.
NOTE
ESET Internet Security supports Antispam protection for Microsoft Outlook, Outlook Express, Windows Mail and
Windows Live Mail.
4.2.3 Protocol filtering
Antivirus protection for application protocols is provided by the ThreatSense scanning engine, which seamlessly integrates all advanced malware scanning techniques. Protocol filtering works automatically, regardless of the
Internet browser or email client used. To edit encrypted (SSL/TLS) settings, go to Web and email > SSL/TLS .
Enable application protocol content filtering – Can be used to disable protocol filtering. Note that many ESET
Internet Security components (Web access protection, Email protocols protection, Anti-Phishing, Web control) depend on this and will be non-functional without it.
Excluded applications – Allows you to exclude specific applications from protocol filtering. Useful when protocol filtering causes compatibility issues.
Excluded IP addresses – Allows you to exclude specific remote addresses from protocol filtering. Useful when protocol filtering causes compatibility issues.
Web and email clients – Used only on Windows XP operating systems, allows you to select applications for which all traffic is filtered by protocol filtering, regardless of ports used.
4.2.3.1 Web and email clients
NOTE
Starting with Windows Vista Service Pack 1 and Windows Server 2008, the new Windows Filtering Platform (WFP) architecture is used to check network communication. Since WFP technology uses special monitoring techniques, the Web and email clients section is not available.
Because of the enormous amount of malicious code circulating the Internet, safe Internet browsing is a very important aspect of computer protection. Web browser vulnerabilities and fraudulent links help malicious code enter the system unnoticed which is why ESET Internet Security focuses on web browser security. Each application accessing the network can be marked as an Internet browser. The check box is two-state:
·
Deselected – Communication of applications is filtered only for specified ports.
·
Selected – Communication is always filtered (even if a different port is set).
59
60
4.2.3.2 Excluded applications
To exclude communication of specific network-aware applications from content filtering, select them in the list.
HTTP/POP3/IMAP communication of the selected applications will not be checked for threats. We recommend only using this for applications that do not work properly with their communication being checked.
Running applications and services will be available here automatically. Click Add to add an application manually if it is not shown on the protocol filtering list.
4.2.3.3 Excluded IP addresses
The entries in the list will be excluded from protocol content filtering. HTTP/POP3/IMAP communication from/to the selected addresses will not be checked for threats. We recommend that you only use this option for addresses that are known to be trustworthy.
Click Add to exclude an IP address/address range/subnet of a remote point not shown on the protocol filtering list.
Click Remove to remove selected entries from the list.
4.2.3.3.1 Add IPv4 address
This allows you to add an IP address/address range/subnet of a remote point to which a rule is applied. Internet
Protocol version 4 is the older but still the most widely used.
Single address – Adds the IP address of an individual computer for which the rule is to be applied (for example
192.168.0.10
).
Address range – Enter the starting and ending address IP address to specify the IP range (of several computers) for which the rule is to be applied (for example 192.168.0.1
to 192.168.0.99
).
Subnet – Subnet (a group of computers) defined by an IP address and mask.
For example, 255.255.255.0
is the network mask for the 192.168.1.0/24 prefix, that means 192.168.1.1
to
192.168.1.254
address range.
4.2.3.3.2 Add IPv6 address
This allows you to add an IPv6 address/subnet of a remote point for which the rule is applied. It is the newest version of the Internet protocol and will replace the older version 4.
Single address – Adds the IP address of an individual computer for which the rule is to be applied (for example
2001:718:1c01:16:214:22f f :f ec9:ca5 ).
Subnet – Subnet (a group of computers) is defined by an IP address and mask (for example: 2002:c0a8:6301:1::1/64 ).
4.2.3.4 SSL/TLS
ESET Internet Security is capable of checking for threats in communications that use the SSL protocol. You can use various scanning modes to examine SSL protected communications with trusted certificates, unknown certificates, or certificates that are excluded from SSL-protected communication checking.
Enable SSL/TLS protocol filtering – If protocol filtering is disabled, the program will not scan communications over
SSL.
SSL/TLS protocol filtering mode is available in following options:
Automatic mode – Default mode will only scan appropriate applications such as web browsers and email clients.
You can override it by selecting applications for which their communications will be scanned.
Interactive mode – If you enter a new SSL protected site (with an unknown certificate), an
from scanning.
Policy mode – Select this option to scan all SSL protected communications except communications protected by certificates excluded from checking. If a new communication using an unknown, signed certificate is established, you will not be notified and the communication will automatically be filtered. When you access a server with an untrusted certificate that is marked as trusted (it is on the trusted certificates list), communication to the server is allowed and the content of the communication channel is filtered.
List of SSL filtered applications – Allows you to customize ESET Internet Security behavior for specific applications.
List of known certificates – Allows you to customize ESET Internet Security behavior for specific SSL certificates.
Exclude communication with trusted domains – When enabled, communication with trusted domains will be excluded from checking. Domain trustiness is determined by builtin whitelist.
Block encrypted communication utilizing the obsolete protocol SSL v2 – Communication using the earlier version of the SSL protocol will automatically be blocked.
Root certificate
Add the root certificate to known browsers – For SSL communication to work properly in your browsers/email clients, it is essential that the root certificate for ESET be added to the list of known root certificates
61
62
(publishers). When enabled, ESET Internet Security will automatically add the ESET root certificate to known browsers (for example, Opera and Firefox). For browsers using the system certification store, the certificate is added automatically (for example, in Internet Explorer).
To apply the certificate to unsupported browsers, click View Certificate > Details > Copy to File...
and manually import it into the browser.
Certificate validity
If the certificate cannot be verified using the TRCA certificate store – In some cases, a website certificate cannot be verified using the Trusted Root Certification Authorities (TRCA) store. This means that the certificate is signed by someone (for example, the administrator of a web server or a small business) and considering this certificate as trusted is not always a risk. Most large businesses (for example banks) use a certificate signed by the TRCA. If Ask about certificate validity is selected (selected by default), the user will be prompted to select an action to take when encrypted communication is established. You can select Block communication that uses the certificate to always terminate encrypted connections to sites with unverified certificates.
If the certificate is invalid or corrupt – This means that the certificate expired or was incorrectly signed. In this case, we recommend that you leave Block communication that uses the certificate selected.
4.2.3.4.1 Certificates
For SSL communication to work properly in your browsers/email clients, it is essential that the root certificate for
ESET be added to the list of known root certificates (publishers). Add the root certificate to known browsers should be enabled. Select this option to automatically add the ESET root certificate to the known browsers (for example,
Opera and Firefox). For browsers using the system certification store, the certificate is added automatically (e.g.
Internet Explorer). To apply the certificate to unsupported browsers, click View Certificate > Details > Copy to File...
and then manually import it into the browser.
In some cases, the certificate cannot be verified using the Trusted Root Certification Authorities store (e.g.
VeriSign). This means that the certificate is self-signed by someone (e.g. administrator of a web server or a small business company) and considering this certificate as trusted is not always a risk. Most large businesses (for example banks) use a certificate signed by TRCA. If Ask about certificate validity is selected (selected by default), the user will be prompted to select an action to take when encrypted communication is established. An action selection dialog will be displayed where you can decide to mark the certificate as trusted or excluded. If the certificate is not present in the TRCA list, the window is red . If the certificate is on the TRCA list, the window will be green .
You can select Block communication that uses the certificate to always terminate an encrypted connection to the site that uses the unverified certificate.
If the certificate is invalid or corrupt, it means that the certificate expired or was incorrectly self-signed. In this case, we recommend that you block the communication that uses the certificate.
4.2.3.4.1.1 Encrypted network traffic
If the computer is configured for SSL protocol scanning, a dialog window prompting you to choose an action may be opened when there is an attempt to establish encrypted communication (using an unknown certificate).
The dialog window contains the following information:
· name of the application that initiated the communication
· name of the certificate used
· action to perform - whether to scan the encrypted communication and whether to remember the action for the application / certificate
If the certificate is not located in the Trusted Root Certification Authorities store (TRCA), it is considered untrusted.
4.2.3.4.2 List of known certificates
The List of known certificates can be used to customize ESET Internet Security behavior for specific SSL certificates, and to remember actions chosen if Interactive mode is selected in SSL/TLS protocol filtering mode . The list can be viewed and edited in Advanced setup (F5) > Web and email > SSL/TLS > List of known certificates .
The List of known certificates window consists of:
Columns
Name – Name of the certificate.
Certificate issuer – Name of the certificate creator.
Certificate subject – The subject field identifies the entity associated with the public key stored in the subject public key field.
Access – Select Allow or Block as the Access action to allow/block communication secured by this certificate regardless of its trustworthiness. Select Auto to allow trusted certificates and ask for untrusted ones. Select Ask to always ask user what to do.
Scan – Select Scan or Ignore as the Scan action to scan or ignore communication secured by this certificate.
Select Auto to scan in automatic mode and ask in interactive mode. Select Ask to always ask the user what to do.
Control elements
Add – Add a new certificate and adjust its settings regarding access and scan options.
Edit – Select the certificate that you want to configure and click Edit .
Remove – Select the certificate that you want to delete and click Remove .
OK/Cancel – Click OK if you want to save changes or click Cancel if you want to exit without saving.
4.2.3.4.3 List of SSL/TLS filtered applications
The List of SSL/TLS filtered applications can be used to customize ESET Internet Security behavior for specific applications, and to remember actions chosen if Interactive mode is selected in SSL/TLS protocol filtering mode . The list can be viewed and edited in Advanced setup (F5) > Web and email > SSL/TLS > List of SSL/TLS filtered applications .
The List of SSL/TLS filtered applications window consists of:
Columns
Application – Name of the application.
Scan action – Select Scan or Ignore to scan or ignore communication. Select Auto to scan in automatic mode and ask in interactive mode. Select Ask to always ask the user what to do.
Control elements
Add – Add filtered application.
Edit – Select the certificate that you want to configure and click Edit .
Remove – Select the certificate that you want to delete and click Remove .
OK/Cancel – Click OK if you want to save changes or click Cancel if you want to exit without saving.
63
4.2.4 Anti-Phishing protection
The term phishing defines a criminal activity that uses social engineering (the manipulation of users in order to obtain confidential information). Phishing is often used to gain access to sensitive data such as bank account
phishing protection, which blocks web pages known to distribute this type of content.
We strongly recommend that you enable Anti-Phishing in ESET Internet Security. To do so, open Advanced setup
(F5) and navigate to Web and email > Anti-Phishing protection .
Visit our Knowledgebase article for more information on Anti-Phishing protection in ESET Internet Security.
Accessing a phishing website
When you access a recognized phishing website, the following dialog will be displayed in your web browser. If you still want to access the website, click Ignore threat (not recommended) .
NOTE
Potential phishing websites that have been whitelisted will expire after several hours by default. To allow a
website permanently, use the URL address management tool. From
Advanced setup (F5) expand Web and email
> Web access protection > URL address management > Address list , click Edit and then add the website that you want to edit to the list.
64
Phishing site reporting
The Report link enables you to report a phishing/malicious website to ESET for analysis.
NOTE
Before submitting a website to ESET, make sure it meets one or more of the following criteria:
· the website is not detected at all,
· the website is incorrectly detected as a threat. In this case, you can Report an incorectly blocked page .
Alternatively, you can submit the website by email. Send your email to [email protected]
. Remember to use a descriptive subject and enclose as much information about the website as possible (for example, the website that referred you there, how you learned of this website, etc.).
4.3 Network protection
The Firewall controls all network traffic to and from the system. This is accomplished by allowing or denying individual network connections based on filtering rules. It provides protection against attacks from remote computers and enables blocking of some services. It also provides antivirus protection for HTTP, POP3 and IMAP protocols. This functionality represents a very important element of computer security. ESET Internet Security will inform you when you connect to an unprotected wireless network or network with weak protection.
Firewall configuration can be found in the Setup pane under Network protection . Here, you can adjust the filtering mode, rules and detailed settings. You can also access more detailed settings by clicking the gear wheel >
Configure...
next to Firewall , or by pressing F5 to access Advanced setup.
Click the gear wheel next to Firewall to access the following settings:
Configure...
– Opens the Firewall window in Advanced setup where you can define how the firewall will handle network communication.
Pause firewall (allow all traffic) – The opposite of blocking all network traffic. If selected, all Firewall filtering options are turned off and all incoming and outgoing connections are permitted. Click Enable firewall to reenable the firewall While Network traffic filtering is in this mode.
Block all traffic – All inbound and outbound communication will be blocked by the Firewall. Only use this option if you suspect a critical security risk that requires the system to be disconnected from the network. While
Network traffic filtering is in Block all traffic mode, click Stop blocking all traffic to restore normal firewall operation.
Automatic mode – (when another filtering mode is enabled) – Click to change the filtering mode to automatic filtering mode (with user-defined rules).
Interactive mode – (when another filtering mode is enabled) – Click to change the filtering mode to interactive filtering mode.
65
Network attack protection (IDS)
– Analyzes the content of network traffic and protects from network attacks.
Traffic that is considered harmful will be blocked.
Botnet protection – Quickly and accurately spots malware on your system.
Connected networks – Shows the networks to which network adapters are connected. After clicking the link below the network name, you will be prompted to select a protection type (strict or allowed) for the network you are connected to via your network adapter. This setting defines how accessible your computer is to other computers on the network.
Temporary IP address blacklist – View a list of IP addresses that have been detected as the source of attacks and added to the blacklist to block connection for a certain period of time. For more information, click this option and then press F1.
Troubleshooting wizard – Helps you solve connectivity problems caused by ESET Firewall. For more detailed
information see Troubleshooting wizard .
66
4.3.1 Firewall
The Firewall controls all network traffic to and from the system. This is accomplished by allowing or denying individual network connections based on specified filtering rules. It provides protection against attacks from remote computers and can block potentially threatening services. It also provides antivirus protection for HTTP,
POP3 and IMAP protocols.
Basic
Enable Firewall – We recommend that you leave this feature enabled to ensure the security of your system. With the firewall engaged, network traffic is scanned in both directions.
Also evaluate rules from Windows firewall – In automatic mode, allow also incoming traffic allowed by rules from
Windows Firewall, unless explicitly blocked by ESET rules.
Filtering mode – The behavior of the firewall changes based on the filtering mode. Filtering modes also influence the level of user interaction required. The following filtering modes are available for the ESET Internet Security
Firewall:
Automatic mode – The default mode. This mode is suitable for users who prefer easy and convenient use of the firewall without the need to define rules. Custom, user-defined rules can be created but are not required in
Automatic mode. Automatic mode allows all outbound traffic for a given system and blocks most inbound traffic with the exception of some traffic from the Trusted Zone (as specified in IDS and advanced option/Allowed services) and responses to recent outbound communications.
Interactive mode – Allows you to build a custom configuration for your Firewall. When a communication is detected and no existing rules apply to that communication, a dialog window reporting an unknown connection will be displayed. The dialog window gives the option to allow or deny the communication, and the decision to allow or deny can be saved as a new rule for the Firewall. If you choose to create a new rule, all future connections of this type will be allowed or blocked according to that rule.
Policy-based mode – Blocks all connections that are not defined by a specific rule that allows them. This mode allows advanced users to define rules that permit only desired and secure connections. All other unspecified connections will be blocked by the Firewall.
Learning mode – Automatically creates and saves rules; this mode is best used for the initial configuration of the
Firewall, but should not be left on for prolonged periods of time. No user interaction is required, because ESET
Internet Security saves rules according to predefined parameters. Learning mode should only be used until all rules for required communications have been created to avoid security risks.
rules in different situations.
Enable Connected Home Monitor – Protects computers from incoming network (Wi-Fi) threats.
Notify about newly discovered network devices – Notifies you when a new device is detected on your network.
Advanced
Rules – Here you can add rules and define how the Firewall handles network traffic.
Zones – Here you can create zones containing one or multiple secure IP addresses.
NOTE
You can create an IDS exception when a Botnet attacks your computer. An exception can be modified in
Advanced setup (F5) > Network protection > Network attack protection > IDS exceptions by clicking Edit .
4.3.1.1 Learning mode settings
Learning mode automatically creates and saves a rule for each communication that has been established in the system. No user interaction is required, because ESET Internet Security saves rules according to the predefined parameters.
This mode can expose your system to risk, and is only recommended for initial configuration of the Firewall.
Select Learning mode from drop-down menu in Advanced setup (F5) > Firewall > Basic > Filtering mode to activate
Learning mode options . This section includes the following items:
WARNING
While in Learning mode, the Firewall does not filter communication. All outgoing and incoming communications are allowed. In this mode, your computer is not fully protected by the Firewall.
67
Communication type – Select specific rule creation parameters for each type of communication. There are four types of communication:
Inbound traffic from the Trusted zone – An example of an incoming connection within the trusted zone would be a remote computer from within the trusted zone attempting to establish communication with a local application running on your computer.
Outbound traffic to the Trusted zone – A local application attempting to establish a connection to another computer within the local network, or within a network in the trusted zone.
Inbound Internet traffic – A remote computer attempting to communicate with an application running on the computer.
Outbound Internet traffic – A local application attempting to establish a connection to another computer.
Each section allows you to define parameters to be added to newly created rules:
Add local port – Includes the local port number of the network communication. For outgoing communications, random numbers are usually generated. For this reason, we recommend enabling this option only for incoming communications.
Add application – Includes the name of the local application. This option is suitable for future application-level rules
(rules that define communication for an entire application). For example, you can enable communication only for a web browser or email client.
Add remote port – Includes the remote port number of the network communication. For example you can allow or deny a specific service associated with a standard port number (HTTP – 80, POP3 – 110, etc.).
Add remote IP address/Trusted zone – A remote IP address or zone can be used as a parameter for new rules defining all network connections between the local system and that remote address / zone. This option is suitable if you want to define actions for a certain computer or a group of networked computers.
Maximum number of different rules for an application – If an application communicates through different ports to various IP addresses, etc., the firewall in learning mode creates appropriate count of rules for this application. This option allows you to limit the number of rules that can be created for one application.
4.3.1.2 Network attack protection
Enable Network attack protection (IDS)
– Analyzes the content of network traffic and protects from network attacks. Any traffic that is considered harmful will be blocked.
Enable Botnet protection – Detects and blocks communications associated with malicious command and control servers by recognizing patterns that indicate a computer is infected and a bot is attempting to communicate.
IDS exceptions – Allows you to add IDS exceptions and customize reactions to malicious activities.
68
4.3.2 Firewall profiles
Profiles can be used to control the behavior of the ESET Internet Security Firewall. When creating or editing a
Firewall rule, you can assign it to a specific profile, or have it apply to every profile. When a profile is active on a network interface, only the global rules (rules with no profile specified) and the rules that have been assigned to that profile are applied to it. You can create multiple profiles with different rules assigned to network adapters or assigned to networks to easily alter Firewall behavior.
Click Edit next to the list of profiles to open the Firewall Profiles window where you can edit profiles.
A network adapter can be set to use a profile configured for a specific network when it is connected to that network.
You can also assign a specific profile to use when on a given network in Advanced setup (F5) > Network protection >
Firewall > Known Networks . Select a network from the list of Known networks and click Edit to assign a firewall profile to the specific network from the Firewall profile drop-down menu. If that network has no assigned profile, then the adapter's default profile will be used. If the adapter is set up not to use the network's profile, its default profile will be used regardless of which network it is connected to. If there is no profile for a network or for adapter configuration, the global default profile is used. To assign a profile to a network adapter, select the network
adapter, click Edit next to Profiles assigned to network adapters , edit the selected network adapter and select the profile from the Default firewall profile drop-down menu.
When the Firewall switches to another profile, a notification will appear in the lower right corner by the system clock.
4.3.2.1 Profiles assigned to network adapters
By switching profiles you can quickly make multiple changes to firewall behavior. Custom rules can be set and applied for particular profiles. Network adapter entries for all adapters present on the machine are added to the list of Network adapters automatically.
Columns
Name – Name of the network adapter.
Default firewall profile – The default profile is used when the network you are connected to has no configured profile, or your network adapter is set not to use a network profile.
Prefer network's profile – When Prefer connected network's firewall profile enabled, the network adapter will use the firewall profile assigned to a connected network whenever possible.
Control elements
Add – Adds a new network adapter.
Edit – Allows you to edit an existing network adapter.
Remove – Select a network adapter and click Remove if you want to remove a network adapter from the list.
OK/Cancel – Click OK if you want to save changes or click Cancel to leave without any changes.
4.3.3 Configuring and using rules
Rules represent a set of conditions used to meaningfully test all network connections and all actions assigned to these conditions. Using Firewall rules, you can define the action that is taken when different types of network connections are established. To access the rule filtering setup, navigate to Advanced setup (F5) > Firewall > Basic .
Some of predefined rules are bound to the check boxes from allowed services (IDS and advanced options) and they can not be turned off directly, instead you can use those related check boxes to do it.
Unlike the previous version of ESET Internet Security, rules are evaluated from top to bottom. The action of the first matching rule is used for each network connection being evaluated. This is an important behavioral change from the previous version, in which the priority of rules was automatic and more specific rules had higher priority then more general ones.
Connections can be divided into incoming and outgoing connections. Incoming connections are initiated by a remote computer attempting to establish a connection with the local system. Outgoing connections work in the opposite way – the local system contacts a remote computer.
If a new unknown communication is detected, you must carefully consider whether to allow or deny it. Unsolicited, unsecured or unknown connections pose a security risk to the system. If such a connection is established, we recommend that you pay particular attention to the remote computer and the application attempting to connect to your computer. Many infiltrations try to obtain and send private data, or download other malicious applications to host workstations. The Firewall allows you to detect and terminate such connections.
69
4.3.3.1 Firewall rules
Click Edit next to Rules in the Basic tab section to display the Firewall rules window, where the list of all rules is displayed. Add , Edit , and Remove allow you to add, configure or delete rules. You can adjust the priority level of a rule by selecting a rule(s) and clicking Top/Up/Down/Bottom .
TIP : You can use the Search field to find a rule(s) by name, protocol or port.
70
Columns
Name – Name of rule.
Enabled – Shows if rules are enabled or disabled, the corresponding check box must be selected to activate a rule.
Protocol – The protocol this rule is valid for.
Profile – Shows the firewall profile this rule is valid for.
Action – Shows the status of communication (block/allow/ask).
Direction – Direction of communication (incoming/outgoing/both).
Local – IP address and port of local computer.
Remote – IP address and port of remote computer.
Applications – The application to which the rule applies.
Control elements
Add – Creates a new rule.
Edit – Allows you to edit existing rules.
Remove – Removes existing rules.
Show built in (predefined) rules – Rules predefined by ESET Internet Security which allow or deny specific communications. You can disable these rules, but you cannot delete a predefined rule.
Top/Up/Down/Bottom – Allows you to adjust the priority level of rules (rules are executed from top to bottom).
4.3.3.2 Working with rules
Modification is required each time that monitored parameters are changed. If changes are made such that a rule cannot fulfill the conditions and the specified action cannot be applied, the given connection may be refused. This can lead to problems with the operation of the application affected by a rule. An example is a change of network address or port number for the remote side.
The upper part of the window contains three tabs:
·
General – Specify a rule name, the direction of the connection, the action ( Allow , Deny , Ask ), the protocol and the profile to which the rule will apply.
·
Local – Displays information about the local side of the connection, including the number of the local port or port range and the name of the communicating application. Also allows you to add a predefined or created zone with a range of IP addresses here by clicking Add .
·
Remote – This tab contains information about the remote port (port range). It allows you to define a list of remote IP addresses or zones for a given rule. You can also add a predefined or created zone with range of IP addresses here by clicking Add .
When creating a new rule, you must enter a name for the rule in the Name field. Select the direction to which the rule applies from the Direction drop-down menu and the action to be executed when a communication meets the rule from the Action drop-down menu.
Protocol represents the transfer protocol used for the rule. Select which protocol to use for a given rule from the drop-down menu.
ICMP Type/Code represents an ICMP message identified by a number (for example; 0 represents "Echo Reply").
All rules are enabled for Any profile by default. Alternatively, select a custom firewall profile using the Profile dropdown menu.
If you enable Log , the activity connected with the rule will be recorded in a log. Notify user displays a notification when the rule is applied.
NOTE
Below is an example in which we create a new rule to allow the web browser application to access the network.
The following must be configured:
·
In the General tab, enable outgoing communication via the TCP and UDP protocol.
·
Add your browser application (for Internet Explorer it is iexplore.exe) in the Local tab.
·
In the Remote tab, enable port number 80 if you want to allow standard Internet browsing.
NOTE
Please be aware that predefined rules can be modified in limited way.
4.3.4 Configuring zones
A zone represents a collection of network addresses that create one logical group of IP addresses, useful when you need to reuse the same set of addresses in multiple rules. Each address in a given group is assigned similar rules defined centrally for the whole group. One example of such a group is a Trusted zone . A Trusted zone represents a group of network addresses that are not blocked by the Firewall in any way. These zones can be configured in
Advanced setup > Firewall > Advanced , by clicking Edit next to Zones . To add a new zone click Add , enter a Name for the zone, a Description and add a remote IP address into the Remote computer address (IPv4/IPv6, range, mask) field.
In the Firewall zones setup window, you can specify a zone name, description and network address list (also see
).
71
72
4.3.5 Known networks
When using a computer that frequently connects to public networks or networks outside of your normal home or work network, we recommend that you verify the network credibility of new networks that you are connecting to.
Once networks are defined, ESET Internet Security can recognize trusted (Home or office) networks using network parameters configured in Network Identification . Computers often enter networks with IP addresses that are similar to the trusted network. In such cases, ESET Internet Security may consider an unknown network to be trusted
(Home or office network). We recommend that you use Network authentication to avoid this type of situation.
When a network adapter is connected to a network or its network settings are reconfigured, ESET Internet Security will search the known network list for a record that matches the new network. If Network identification and
Network authentication (optional) match, the network will be marked connected in this interface. When no known network is found, network identification configuration will create a new network connection to identify the network the next time that you connect to it. By default, the new network connection uses the Public network protection type. The New Network Connection Detected dialog window will prompt you to choose between the
Public network , Home or office network or Use Windows setting protection type. If a network adapter is connected to a known network and that network is marked as Home or office network , local subnets of the adapter will be added to the Trusted zone.
Protection type of new networks – Select which of the following options: Use Windows setting , Ask user or Mark as public is used by default for new networks.
Known networks allows you to configure network name, network identification, protection type, etc. To access
click Edit .
NOTE
When you select Use Windows setting a dialog will not appear and the network you are connected to will automatically be marked according to your Windows settings. This will cause certain features (for example file sharing and remote desktop) to become accessible from new networks.
4.3.5.1 Known networks editor
Known networks can be configured manually in Advanced setup > Network protection > Firewall > Known Networks by clicking Edit .
Columns
Name – Name of known network.
Protection type – Shows if the network is set to Home or office network , Public or Use Windows setting .
Firewall profile – Select a profile from the Display rules used in the profile drop-down menu to display the profiles rules filter.
Update profile – Allows you to apply created update profile when connected to this network.
Control elements
Add – Creates a new known network.
Edit – Click to edit an existing known network.
Remove – Select a network and click Remove to remove it from the list of known networks.
Top/Up/Down/Bottom – Allows you to adjust the priority level of known networks (networks are evaluated from top to bottom).
Network configuration settings are arranged in the following tabs:
Network
Here you can define the Network name and select the Protection type (Public network, Home or office network or
Use Windows setting) for the network. Use the Firewall profile drop-down menu to select the profile for this network. If the network uses the Home or office network protection type, all directly connected network subnets are considered trusted. For example, if a network adapter is connected to this network with the IP address
192.168.1.5 and the subnet mask 255.255.255.0, the subnet 192.168.1.0/24 is added to that adapter's trusted zone. If the adapter has more addresses/subnets, all of them will be trusted, regardless of the Network Identification configuration of the known network.
Additionally, addresses added under Additional trusted addresses are always added to the trusted zone of adapters connected to this network (regardless of the network's protection type).
Warn about weak WiFi encryption – ESET Internet Security will inform you when you connect to an unprotected wireless network or network with weak protection.
Firewall profile – Select firewall profile that will be used when connected to this network.
Update profile – Select update profile that will be used when connected to this network.
The following conditions must be met for a network to be marked as connected in the list of connected networks:
·
Network identification – All filled in parameters must match active connection parameters.
·
Network authentication – if authentication server is selected, successful authentication with the ESET
Authentication Server must take place.
·
Network restrictions (Windows XP only) – all selected global restrictions must be fulfilled.
Network identification
Network identification is performed based on the local network adapter's parameters. All selected parameters are compared against the actual parameters of active network connections. IPv4 and IPv6 addresses are allowed.
Network authentication
Network authentication searches for a specific server in the network and uses asymmetric encryption (RSA) to authenticate that server. The name of the network being authenticated must match the zone name set in authentication server settings. The name is case sensitive. Specify a server name, server listening port and a public
name can be entered in the form of an IP address, DNS or NetBios name and can be followed by a path specifying
73
the location of the key on the server (for example, server_name_/directory1/directory2/authentication). You can specify alternate servers to use by appending them to the path, separated by semicolons.
Download the ESET Authentication Server .
The public key can be imported using any of the following file types:
·
PEM encrypted public key (.pem), this key can be generated using the ESET Authentication Server (see
Network authentication – Server configuration
).
·
Encrypted public key
·
Public key certificate (.crt)
74
Click Test to test your settings. If authentication is successful, Server authentication was successf ul will be displayed.
If authentication is not configured properly, one of the following error messages will be displayed:
Server authentication f ailed. Invalid or mismatched signature.
Server signature does not match the public key entered.
Server authentication f ailed. Network name doesn't match.
The configured network name does not correspond with the authentication server zone name. Review both names and ensure they are identical.
Server authentication f ailed. Invalid or no response f rom server.
No response is received if the server is not running or is inaccessible. An invalid response may be received if another HTTP server is running on the specified address.
Invalid public key entered.
Verify that the public key file you have entered is not corrupted.
Network restrictions
(for Windows XP only)
On modern operating systems (Windows Vista and newer), each network adapter has its own trusted zone and active firewall profile. Unfortunately on Windows XP this layout is not supported, so all network adapters always share the same trusted zone and active firewall profile. This can be a potential security risk when the machine is connected to multiple networks at the same time. In such cases, traffic from an untrusted network may be evaluated using the trusted zone and firewall profile configured for the other connected network. To mitigate any security risk, you can use the following restrictions to avoid globally applying one network configuration while another (potentially untrusted) network is connected.
On Windows XP, connected network settings (trusted zone and firewall profile) are applied globally unless at least one of these restrictions is enabled and not fulfilled:
a. Only one connection is active b. No wireless connection is established c. No unsecured wireless connection is established
4.3.5.2 Network authentication - Server configuration
The authentication process can be executed by any computer/server connected to the network that is to be authenticated. The ESET Authentication Server application needs to be installed on a computer/server that is always accessible for authentication whenever a client attempts to connect to the network. The installation file for the
ESET Authentication Server application is available for download on ESET’s website.
After you install the ESET Authentication Server application, a dialog window will appear (you can access the application by clicking Start > Programs > ESET > ESET Authentication Server ).
To configure the authentication server, enter the authentication zone name, the server listening port (default is 80) as well as the location to store the public and private key pair. Next, generate the public and private key that will be used in the authentication process. The private key will remain on the server while the public key needs to be imported on the client side in the Zone authentication section when setting up a zone in the firewall setup.
For more detailed information, read the following ESET Knowledgebase article .
4.3.6 Logging
The ESET Internet Security Firewall saves all important events in a log file, which can be viewed directly from the main menu. Click Tools > Log files and then select Network protection from the Log drop-down menu.
The log files can be used to detect errors and reveal intrusions into your system. ESET Firewall logs contain the following data:
·
Date and time of event
·
Name of event
·
Source
·
Target network address
·
Network communication protocol
·
Rule applied, or name of worm, if identified
·
Application involved
·
User
A thorough analysis of this data can help detect attempts to compromise system security. Many other factors indicate potential security risks and allow you to minimize their impact: frequent connections from unknown locations, multiple attempts to establish connections, unknown applications communicating or unusual port numbers used.
75
4.3.7 Establishing connection - detection
The Firewall detects each newly-created network connection. The active firewall mode determines which actions are performed for the new rule. If Automatic mode or Policy-based mode is activated, the Firewall will perform predefined actions with no user interaction.
Interactive mode displays an informational window that reports detection of a new network connection, supplemented with detailed information about the connection. You can opt to allow the connection or refuse
(block) it. If you repeatedly allow the same connection in the dialog window, we recommend that you create a new rule for the connection. To do this, select Create rule and remember permanently and save the action as a new rule for the Firewall. If the firewall recognizes the same connection in the future, it will apply the existing rule without requiring user interaction.
76
Please be careful when creating new rules and only allow connections that you know are secure. If all connections are allowed, then the Firewall fails to accomplish its purpose. These are the important parameters for connections:
·
Remote side – Only allow connections to trusted and known addresses.
·
Local application – It is not advisable to allow connections for unknown applications and processes.
·
Port number – Communication on common ports (e.g., web traffic – port number 80) should be allowed under normal circumstances.
In order to proliferate, computer infiltrations often use the Internet and hidden connections to help them infect remote systems. If rules are configured correctly, a Firewall becomes a useful tool for protection against a variety of malicious code attacks.
4.3.8 Solving problems with ESET Personal firewall
If you experience connectivity problems with ESET Internet Security installed, there are several ways to tell if the
ESET Firewall is causing the issue. Moreover, ESET Firewall can help you create new rules or exceptions to resolve connectivity problems.
See the following topics for help resolving problems with the ESET Firewall:
·
·
Logging and creating rules or exceptions from log
·
Creating exceptions from Firewall notifications
·
·
Solving problems with protocol filtering
4.3.8.1 Troubleshooting wizard
The troubleshooting wizard silently monitors all blocked connections, and will guide you through the troubleshooting process to correct firewall issues with specific applications or devices. Next, the wizard will suggest a new set of rules to be applied if you approve them. Troubleshooting wizard can be found in the main menu under
Setup > Network protection .
4.3.8.2 Logging and creating rules or exceptions from log
By default, the ESET Firewall does not log all blocked connections. If you want to see what was blocked by the
Firewall, enable logging in the Advanced setup under Tools > Diagnostics > Enable Firewall advanced logging . If you see something in the log that you do not want the Firewall to block, you can create a rule or an IDS exception for it by right-clicking on that item and selecting Don't block similar events in the future . Please note that the log of all blocked connections can contain thousands of items and it might be difficult to find a specific connection in this log.
You can turn logging off after you have resolved your issue.
For more information about the log see Log files
.
NOTE
Use logging to see the order in which the Firewall blocked specific connections. Moreover, creating rules from the log allows you to create rules that do exactly what you want.
4.3.8.2.1 Create rule from log
The new version of ESET Internet Security allows you to create a rule from the log. From the main menu click Tools >
More tools > Log files . Choose Firewall from drop-down menu, right-click your desired log entry and select Don't block similar events in the future from the context menu. A notification window will display your new rule.
To allow for the creation of new rules from the log, ESET Internet Security must be configured with the following settings:
· set the minimum logging verbosity to Diagnostic in Advanced setup (F5) > Tools > Log files ,
· enable Display notifications also for incoming attacks against security holes in Advanced setup (F5) > Firewall >
IDS and advanced options > Intrusion detection .
4.3.8.3 Creating exceptions from Personal firewall notifications
When ESET Firewall detects malicious network activity, a notification window describing the event will be displayed. This notification contains a link that will allow you to learn more about the event and set up an exception for this event if you want.
NOTE
If a network application or device does not implement network standards correctly it can trigger repetitive firewall IDS notifications. You can create an exception directly from the notification to keep the ESET Firewall from detecting this application or device.
77
78
4.3.8.4 Advanced PCAP logging
This feature is intended to provide more complex log files for ESET customer support. Use this feature only when requested to by ESET customer support, as it might generate a huge log file and slow down your computer.
1. Navigate to Advanced setup > Tools > Diagnostics and enable Enable Firewall advanced logging .
2. Attempt to reproduce the problem you are experiencing.
3. Disable advanced PCAP logging.
4. The PCAP log file can be found in the same directory where diagnostic memory dumps are generated:
·
Microsoft Windows Vista or newer
C:\ProgramData\ESET\ESET Internet Security\Diagnostics\
·
Microsoft Windows XP
C:\Documents and Settings\All Users\...
4.3.8.5 Solving problems with protocol filtering
If you experience problems with your browser or email client, the first step is to determine if protocol filtering is responsible. To do that, try temporarily disabling application protocol filtering in the advanced setup (remember to turn it back on after you're finished, otherwise your browser and email client will remain unprotected). If your problem disappears after turning it off, here is a list of common problems and a way to solve them:
Update or secure communication problems
If your application complains about the inability to update or that a communication channel is not secure:
·
If you have SSL protocol filtering enabled, try temporarily turning it off. If that helps, you can keep using SSL filtering and make the update work by excluding the problematic communication:
Switch SSL protocol filtering mode to interactive. Rerun the update. There should be a dialog informing you about encrypted network traffic. Make sure the application matches the one you're troubleshooting and the certificate looks like coming from the server it is updating from. Then choose to remember action for this certificate and click ignore. If no more relevant dialogs are show, you can switch the filtering mode back to automatic and the problem should be solved.
·
If the application in question is not a browser or email client, you can completely exclude it from protocol filtering
(doing this for browser or email client would leave you exposed). Any application that had its communication filtered in the past should already be in the list provided to you when adding exception, so manually adding one shouldn't be necessary.
Problem accessing a device on your network
If you are unable to use any functionality of a device on your network (this could mean opening a webpage of your webcam or playing video on a home media player), try adding its IPv4 and IPv6 addresses to the list of excluded addresses.
Problems with a particular website
You can exclude specific websites from protocol filtering using URL address management. For example if you can't access https://www.gmail.com/intl/en/mail/help/about.html
, try adding *gmail.com* to the list of excluded addresses.
Error "Some of the applications capable of importing the root certificate are still running“
When you enable SSL protocol filtering, ESET Internet Security makes sure that installed applications trust the way it filters SSL protocol by importing a certificate to their certificate store. For some applications this is not possible while they are running. This includes Firefox and Opera. Make sure none of them are running (the best way to do this is to open Task Manager and make sure there is no firefox.exe or opera.exe under Processes tab), then hit retry.
Error about untrusted issuer or invalid signature
This most likely means that the import described above failed. First make sure that none of the mentioned applications are running. Then disable SSL protocol filtering and enable it back on. This reruns the import.
4.4 Security tools
Security tools setup allows you adjust following modules:
·
·
·
4.4.1 Parental control
The Parental control module allows you to configure parental control settings, which provide parents with automated tools to help protect their children and set restrictions for devices and services. The goal is to prevent children and young adults from accessing pages with inappropriate or harmful content.
Parental control lets you block webpages that may contain potentially offensive material. In addition, parents can prohibit access to more than 40 pre-defined website categories and over 140 subcategories.
To activate Parental control for a specific user account, follow the steps below:
1. By default Parental control is disabled in ESET Internet Security. There are two methods for activating Parental control: o Click in the Setup > Security tools > Parental control from the main program window and change the
Parental control state to enabled.
o Press F5 to access the Advanced Setup tree, navigate to Web and email > Parental Control and then engage the switch next to Integrate into system .
2. Click Setup > Security tools > Parental control from the main program window. Even though Enabled appears next to Parental control , you must configure Parental control for the desired account by clicking Protect child account or Parent account . In the next window select the birth date to determine the level of access and recommended age-appropriate web pages. Parental control will now be enabled for the specified user account. Click Blocked content and settings...
under the account name to customize categories you want to allow or block in the
tab. To allow or block custom web pages that do not match a category, click the Exceptions tab.
79
80
If you click Setup > Security tools > Parental control from the main product window of ESET Internet Security, you will see that the main window contains:
Windows user accounts
If you have created a role for an existing account, it will be shown here. Click the slider so that it will display a green check mark next to Parental control for the account. Under the active account, click Blocked content and settings... to see the list of allowed categories of web pages for this account and blocked and allowed web pages.
IMPORTANT
To create a new account (for example, for a child), use the following step-by-step instructions for Windows 7 or
Windows Vista:
1. Open User Accounts by clicking the Start button (located at the bottom left side of your desktop), clicking
Control Panel and then clicking User Accounts .
2. Click Manage User Account . If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. Click Create New Account .
4. Type the name you want to give the user account, click an account type, and then click Create Account .
5. Reopen the Parental control pane by clicking again from the main program window of ESET Internet Security to Setup > Security tools > Parental control .
The bottom part of a window contains
Add an exception for a website... – The specific website can be allowed or blocked according your preferences for each parental account separately.
Show logs – This shows a detailed log of the Parental control activity (blocked pages, the account, the page was blocked for, category, etc.). You can also filter this log based on the criteria you choose by clicking Filtering .
Parental control
After disabling Parental control, a Disable Parental control window will appear. Here you can set the time interval for which protection is disabled. The option then changes to Paused or Disabled permanently .
It is important to protect the settings in ESET Internet Security with a password. This password can be set in the
Access setup section. If no password is set the following warning will appear –
Protect all settings with a password to prevent unauthorized changes. The restrictions set in Parental control only affect the standard user accounts.
Because an Administrator can override any restriction, they will not have any effect.
HTTPS (SSL) communication is not filtered by default. Therefore, Parental control cannot block web pages that begin with https:// . To enable this feature, turn on the Enable SSL/TLS protocol filtering setting in the Advanced setup tree under Web and email > SSL/TLS .
NOTE
Parental control requires Application protocol content filtering ,
enabled in order to function properly. All of these functionalities are enabled by default.
4.4.1.1 Categories
Engage the switch next to a category to allow it. If you leave the switch off, the category will not be allowed for that account.
Here are some examples of categories (groups) that users might not be familiar with:
·
Miscellaneous – Usually private (local) IP addresses such as intranet, 127.0.0.0/8, 192.168.0.0/16, etc. When you get a 403 or 404 error code, the website will also match this category.
·
Not resolved – This category includes web pages that are not resolved because of an error when connecting to the Parental control database engine.
·
Not categorized – Unknown web pages that are not yet in the Parental control database.
·
Dynamic – Web pages that redirect to other pages on other websites.
81
4.4.1.2 Website exceptions
To add an exception for a website, click Setup > Security tools > Parental control and then click Add an exception for a website .
82
Enter a URL in the Website URL field, select (allowed) or (blocked) for each specific user account and then click OK to add it to the list.
To delete a URL address from the list, click Setup > Security tools > Parental control , click Blocked content and settings under the desired user account, click the Exception tab, select the exception and then click Remove .
In the URL address list, the special symbols * (asterisk) and ? (question mark) cannot be used. For example, web page addresses with multiple TLDs must be entered manually (examplepage.com
, examplepage.sk
, etc.). When you add a domain to the list, all content located on this domain and all subdomains (for example, sub.examplepage.com
) will be blocked or allowed based on your choice of URL-based action.
NOTE
Blocking or allowing a specific web page can be more accurate than blocking or allowing a category of web pages.
Be careful when changing these settings and adding a category/web page to the list.
4.5 Updating the program
Regularly updating ESET Internet Security is the best method to ensure the maximum level of security on your computer. The Update module ensures that both the program modules and the system components are always upto-date.
By clicking Update in the main program window, you can view the current update status including the date and time of the last successful update and if an update is needed.
In addition to automatic updates, you can click Check for updates to trigger a manual update. Regularly updating the program modules and components is an important aspect of maintaining complete protection against malicious code. Please pay attention to their configuration and operation. You must activate your product using your License key to receive updates. If you did not do so during installation, you can enter your License key to activate your product when updating to access ESET update servers.
NOTE
Your License key is provided in an email from ESET after purchasing ESET Internet Security.
83
84
Current version – Shows the version number of the current product version you have installed.
Last successful update – Shows the date of the last successful update. If you do not see a recent date, your product modules may not be current.
Last successful check for updates – Shows the date of the last successful check for updates.
Show all modules – Shows the list of installed program modules.
Click Check for updates to detect the latest available version of ESET Internet Security.
Update process
After clicking Check for updates , the download will begin. A download progress bar and remaining time to download will be displayed. To interrupt the update, click Cancel update .
IMPORTANT
Under normal circumstances, you can see the green check mark in the Update window indicating that program is up to date. If this is not the case, the program is out of date and is more vulnerable to infection. Please update modules as soon as possible.
If you receive an unsuccessful update message, it may be caused by the following issues:
1.
Invalid license – The license key has been incorrectly entered in update setup. We recommend that you check your authentication data. The Advanced setup window (click Setup from the main menu and then click Advanced setup , or press F5 on your keyboard) contains additional update options. Click Help and support > Change license from the main menu to enter a new license key.
2.
An error occurred while downloading update files – This can be caused by incorrect
.
We recommend that you check your Internet connectivity (by opening any website in your web browser). If the website does not open, it is likely that an Internet connection is not established or there are connectivity problems with your computer. Please check with your Internet Service Provider (ISP) if you do not have an active
Internet connection.
85
86
IMPORTANT
We recommend restarting your computer after successful update to ensure that all program modules were updated correctly.
NOTE
For more information, please visit this ESET Knowledgebase article .
4.5.1 Update settings
Update setup options are available in the Advanced setup tree (F5) under Update > Basic . This section specifies update source information like the update servers being used and authentication data for these servers.
Basic
The update profile that is currently in use (unless a specific one is set under Advanced setup > Firewall > Known networks ) is displayed in the Select default update profile drop-down menu.
Automatic profile switching – Allows you to change the profile for specific network.
If you are experiencing difficulty when attempting to download detection engine updates, click Clear to clear the temporary update files/cache.
Module rollback
If you suspect that a new update of the virus database and/or program modules may be unstable or corrupt, you can roll back to the previous version and disable updates for a set period of time. Alternatively, you can enable previously disabled updates if you had postponed them indefinitely.
ESET Internet Security records snapshots of detection engine and program modules for use with the rollback feature. In order to create virus database snapshots, leave the Create snapshots of update files switch enabled. The
Number of locally stored snapshots field defines the number of previous virus database snapshots stored.
If you click Rollback ( Advanced setup (F5) > Update > Basic ), you have to select a time interval from the drop-down menu that represents the period of time that the detection engine and program module updates will be paused.
For updates to be downloaded properly, it is essential that you fill in all update parameters correctly. If you use a firewall, please make sure that your ESET program is allowed to communicate with the Internet (for example, HTTP communication).
Profiles
Update profiles can be created for various update configurations and tasks. Creating update profiles is especially useful for mobile users who need an alternative profile for Internet connection properties that regularly change.
The Select profile to edit drop-down menu displays the currently selected profile and is set to My profile by default.
To create a new profile, click Edit next to List of profiles , enter your own Profile name and then click Add .
Updates
By default, the Update type is set to Regular update to ensure that update files will automatically be download from the ESET server with the least network traffic. Pre-release updates (the Pre-release update option) are updates that have gone through thorough internal testing and will be available to the general public soon. You can benefit from enabling pre-release updates by having access to the most recent detection methods and fixes. However, prerelease updates might not be stable enough at all times and SHOULD NOT be used on production servers and workstations where maximum availability and stability is required.
Ask before downloading update – The program will display a notification where you can choose to confirm or decline update file downloads.
Ask if an update file size is greater than (kB) – The program will display a notification if the update file size is greater than specified value.
Disable notification about successful update – Turns off the system tray notification at the bottom right corner of the screen. It is useful to select this option if a full screen application or a game is running. Please note that Gamer mode will turn off all notifications.
87
88
Module updates
Enable more frequent updates of detection signatures – Detection signatures will be updated in shorter interval.
Disabling this setting may negatively impact detection rate.
Program component update
Application update – A confirmation dialog will be displayed if reinstallation is needed.
4.5.1.1 Advanced update setup
Advanced update setup options include the configuration of Update mode , HTTP Proxy .
4.5.1.1.1 Update mode
The Update mode tab contains options related to regular program updates. These settings enable you to predefine program behavior when new version of detection engine or program component updates are available.
Program component updates include new features or makes changes to features from previous versions, and are included as part of regular (detection engine) updates. After a program component update has been installed, a computer restart may be required.
The following settings are available:
Application update – When enabled, each program component upgrade will be performed automatically and silently without full product upgrading.
Enable manual program component update – By default disabled. When enabled and newer version of ESET
Internet Security is available, you can check for updates in Update pane and install the newer version.
Ask before downloading update – When this option is active, a notification will be displayed and you will be asked to confirm the installation of any available updates before they are installed.
Ask if an update file is greater than (kB) – If the update file is larger than the size specified here, a notification will be displayed and you will be asked to confirm the installation of any available updates before they are installed.
4.5.1.1.2 Connection options
To access the proxy server setup options for a given update profile, click Update in the Advanced setup tree (F5) and then click Profiles > Updates > Connection options . Click the Proxy mode drop-down menu and select one of the three following options:
·
Do not use proxy server
·
Connection through a proxy server
·
Use global proxy server settings
Select Use global proxy server settings to use the proxy server configuration options already specified in the Tools >
Proxy server branch of the Advanced setup tree.
Select Do not use proxy server to specify that no proxy server will be used to update ESET Internet Security.
Connection through a proxy server option should be selected if:
·
A different proxy server than the one defined in Tools > Proxy server is used to update ESET Internet Security.
In this configuration, information for the new proxy should be specified under Proxy server address, communication Port (3128 by default), and Username and Password for the proxy server if required.
·
Proxy server settings are not set globally, but ESET Internet Security will connect to a proxy server for updates.
·
Your computer is connected to the Internet via a proxy server. Settings are taken from Internet Explorer during program installation, but if they are changed (for example, if you change your ISP), please make sure the HTTP proxy settings listed in this window are correct. Otherwise the program will not be able to connect to update servers.
The default setting for the proxy server is Use global proxy server settings .
Use direct connection if proxy is not available – Proxy will be bypassed during update if it is unreachable.
NOTE
The Username and Password fields in this section are specific to the proxy server. Complete these fields only if a username and password are required to access the proxy server. These fields are not for your ESET Internet
Security Username and password, and should only be completed if you know you need a password to access the internet via a proxy server.
4.5.2 Update rollback
If you suspect that a new update of the detection engine and/or program modules may be unstable or corrupt, you can roll back to the previous version and disable updates for a set period of time. Alternatively, you can enable previously disabled updates if you had postponed them indefinitely.
ESET Internet Security records snapshots of detection engine and program modules for use with the rollback feature. In order to create detection engine snapshots, leave Create snapshots of update files check box selected.
The Number of locally stored snapshots field defines the number of previous detection engine snapshots stored.
If you click Rollback ( Advanced setup (F5) > Update > Basic ), you have to select a time interval from the Duration drop-down menu that represents the period of time that the detection engine and program module updates will be paused.
Select Until revoked to postpone regular updates indefinitely until you restore update functionality manually.
Because it represents a potential security risk, we do not recommend selecting this option.
If a rollback is performed, the Roll back button changes to Allow updates . No updates will be allowed for the time interval selected from the Suspend updates drop-down menu. The version of detection engine is downgraded to the oldest available and stored as a snapshot in the local computer file system.
89
90
NOTE
Let the number 6871 be the most recent version of detection engine. 6870 and 6868 are stored as a detection engine snapshots. Note that 6869 is not available because, for example, the computer was turned off and a more recent update was made available before 6869 was downloaded. If the Number of locally stored snapshots field is set to 2 and you click Roll back , the detection engine (including program modules) will be restored to version number 6868. This process may take some time. Check whether the version of detection engine has downgraded from the main program window of ESET Internet Security in the
4.5.3 How to create update tasks
Updates can be triggered manually by clicking Check for updates in the primary window displayed after clicking
Update from the main menu.
Updates can also be run as scheduled tasks. To configure a scheduled task, click Tools > Scheduler . By default, the following tasks are activated in ESET Internet Security:
·
Regular automatic update
·
Automatic update after dial-up connection
·
Automatic update after user logon
Each update task can be modified to meet your needs. In addition to the default update tasks, you can create new update tasks with a user-defined configuration. For more details about creating and configuring update tasks, see
4.6 Tools
The Tools menu includes modules that help simplify program administration and offers additional options for advanced users.
Connected Home Monitor – Reduce the risk of security issues when connected to a network. For more information click
Banking & Payment protection – ESET Internet Security protects your credit card numbers and other sensitive personal data while you use online banking or payment websites. A secured browser will be launched to provide safer banking transactions. For more information please visit this ESET Knowledgebase article .
Click More tools to display other tools to protect your computer.
4.6.1 Connected Home Monitor
Connected Home Monitor can help identify vulnerabilities in your home network such as open ports or a weak router password. It also provides you with an easy-to-access list of connected devices, categorized by device type
(e.g. printer, router, mobile device, etc.) to show you what is connected to your home network. It does not reconfigure your router for you. You will make the changes yourself using your router's specialized interface. Home routers can be highly vulnerable to malware used to launch distributed denial-of-service attacks (DDoS). If the router password has not been changed from the default by the user, it is easy to for hackers to guess, and then log in to your router and reconfigure it or compromise your network.
WARNING
We strongly recommend creating a strong password that is long enough and includes numbers, symbols or capital letters. To make the password harder to crack, use a mix of different types of characters.
91
Each device that is connected to your network is displayed in sonar view. Move your cursor over a device icon to view basic information such as network name and date last seen. Click the device icon to view detailed information about the device.
To display information for all the connected devices in list view, click . List view displays the same data as sonar view in a list format. You can filter devices based on the following criteria using the drop-down menu:
·
Devices connected to current network only
·
Uncategorized devices
·
Devices connected to all networks
There are two types of notifications displayed by the Connected Home Monitor module:
New device connected to network – displayed if a previously unseen device connects to the network while the user is connected.
New network devices found – displayed if you reconnect to your home network and a previously unseen device is now present.
NOTE
Both notification types inform you if an unauthorized device is trying to connect to your network.
NOTE
Recently connected devices are shown closer to the router so that you can easily spot them.
Connected Home Monitor helps you identify a router's vulnerabilities and increases your level of protection when connected to a foreign network.
Click Scan your network to manually perform a scan of the network you are currently connected to.
You can choose from the following scanning options:
·
Scan everything
·
Scan router only
·
Scan devices only
WARNING
Perform network scans on your own home network only! If you do this on other people's networks, be aware of potential danger.
When the scan is complete, a notification with a link to basic information about the device will be shown or you can double-click the suspicious device in list or sonar view. Click Troubleshoot to see recently blocked communications.
NOTE
For more information about Firewall troubleshooting click here.
92
4.6.1.1 Network device
Detailed information about the device can be found here, including the following:
·
Device name
·
Device type
·
Last seen
·
Network name
·
IP address
·
MAC address
The pencil icon indicates that you can modify the device name or change the device type.
Remove device – You can remove the previously connected device to your network in case it is not present anymore.
4.6.2 Webcam Protection
Webcam Protection enables you to see processes and applications that access your computer's web camera. A notification window will be displayed if an unwanted application tries to access your camera. You can allow or block unwanted processes or applications from accessing the camera.
4.6.3 Tools in ESET Internet Security
The More tools menu includes modules that help simplify program administration and offers additional options for advanced users.
93
This menu includes the following tools:
(if ESET LiveGrid® is enabled in ESET Internet Security)
(if Firewall is enabled in ESET Internet Security)
– Redirects you to the ESET SysRescue Live page, where you can download the ESET
SysRescue Live image or Live CD/USB Creator for Microsoft Windows operating systems.
– Helps you restore the computer to a usable state after cleaning the threat.
dialog window displayed after clicking this option is described in this section.
NOTE
ESET SysRescue may not be available for Windows 8 in older versions of ESET security products. In this case we recommend that you upgrade your product or create an ESET SysRescue disk on another version of Microsoft
Windows.
94
4.6.3.1 Log files
Log files contain information about important program events that have occurred and provide an overview of detected threats. Logging is an essential part of system analysis, threat detection and troubleshooting. Logging is performed actively in the background with no user interaction. Information is recorded based on the current log verbosity settings. It is possible to view text messages and logs directly from the ESET Internet Security environment, as well as to archive logs.
Log files are accessible from the main program window by clicking Tools > More tools > Log files . Select the desired log type from the Log drop-down menu. The following logs are available:
·
Detected threats – The threat log offers detailed information about infiltrations detected by ESET Internet
Security . Log information includes the time of detection, name of infiltration, location, the action taken and the name of the user logged in at the time the infiltration was detected. Double-click any log entry to display its details in a separate window.
·
Events – All important actions performed by ESET Internet Security are recorded in the event log. The event log contains information about events and errors that have occurred in the program. It is designed for system administrators and users to solve problems. Often the information found here can help you find a solution for a problem occurring in the program.
·
Computer scan – Results of all completed manual or planned scans are displayed in this window. Each line corresponds to a single computer control. Double-click any entry to view the details of the respective scan.
·
HIPS – Contains records of specific
HIPS rules which are marked for recording. The protocol shows the
application that triggered the operation, the result (whether the rule was permitted or prohibited) and the rule name.
·
Network protection – The network protection log displays all remote attacks detected by the Firewall. Here you will find information about any attack on your computer. The Event column lists detected attacks. The
Source column tells you more about the attacker. The Protocol column reveals the communication protocol used for the attack. Analysis of the network protection log may help you to detect system infiltration attempts in time to prevent unauthorized access to your system.
·
Filtered websites
. Each log includes time, URL address, user and application that created a connection to a particular website.
·
Antispam protection – Contains records related to email messages that were marked as spam.
·
Parental control – Shows web pages blocked or allowed by Parental control. The Match type and Match values columns tell you how filtering rules were applied.
·
Device control – Contains records of removable media or devices that were connected to the computer. Only devices with respective Device control rules will be recorded to the log file. If the rule does not match a connected device, a log entry for a connected device will not be created. You can also view details such as device type, serial number, vendor name and media size (if available).
·
Webcam protection – Contains records about applications blocked by Webcam protection.
Select the contents of any log and press Ctrl + C to copy it to the clipboard. Hold Ctrl and Shift to select multiple entries.
Click Filtering to open the Log filtering window where you can define filtering criteria.
Right-click a specific record to open the context menu. The following options are available in the context menu:
·
Show – Shows more detailed information about the selected log in a new window.
·
Filter same records – After activating this filter, you will only see records of the same type (diagnostics, warnings, ...).
·
Filter.../Find...
– After clicking this option, the Search in log window will allow you to define filtering criteria for specific log entries.
·
Enable filter – Activates filter settings.
·
Disable filter – Clears all filter settings (as described above).
·
Copy/Copy all – Copies information about all the records in the window.
·
Delete/Delete all – Deletes the selected record(s) or all the records displayed – this action requires administrator privileges.
·
Export...
– Exports information about the record(s) in XML format.
·
Export all...
– Export information about all records in XML format.
·
Scroll log – Leave this option enabled to auto scroll old logs and view active logs in the Log files window.
4.6.3.1.1 Logging configuration
The Logging configuration of ESET Internet Security is accessible from the main program window. Click Setup > Enter advanced setup...
> Tools > Log files . The logs section is used to define how the logs will be managed. The program automatically deletes older logs in order to save hard disk space. You can specify the following options for log files:
Minimum logging verbosity – Specifies the minimum verbosity level of events to be logged.
·
Diagnostic – Logs information needed to fine-tune the program and all records above.
·
Informative – Records informative messages, including successful update messages, plus all records above.
·
Warnings – Records critical errors and warning messages.
·
Errors – Errors such as "Error downloading f ile" and critical errors will be recorded.
·
Critical – Logs only critical errors (error starting Antivirus protection, Firewall, etc...).
Log entries older than the specified number of days in the Automatically delete records older than (days) field will automatically be deleted.
Optimize log files automatically – If checked, log files will be automatically be defragmented if the percentage is higher than value specified in the If the number of unused records exceeds (%) field.
95
Click Optimize to begin defragmenting the log files. All empty log entries are removed during this process, which improves performance and log processing speed. This improvement can be observed especially if the logs contain a large number of entries.
Enable text protocol enables the storage of logs in another file format separate from
·
Target directory – The directory where log files will be stored (only applies to Text/CSV). Each log section has its own file with a predefined file name (for example, virlog.txt
for the Detected threats section of log files, if you use a plain text file format to store logs).
·
Type – If you select the Text file format, logs will be stored in a text file and data will be separated into tabs. The same applies to the comma-separated CSV file format. If you choose Event , logs will be stored in the Windows
Event log (can be viewed using Event Viewer in Control panel) as opposed to the file.
Delete all log files – Erases all stored logs currently selected in the Type drop-down menu. A notification about successful deletion of the logs will be shown.
NOTE
In order to help resolve issues more quickly, ESET may ask you to provide logs from your computer. ESET Log
Collector makes it easy for you to collect the information needed. For more information about ESET Log Collector please visit our ESET Knowledgebase article.
4.6.3.2 Running processes
Running processes displays the running programs or processes on your computer and keeps ESET immediately and continuously informed about new infiltrations. ESET Internet Security provides detailed information on running processes to protect users with
96
Process – Image name of the program or process that is currently running on your computer. You can also use the
Windows Task Manager to see all running processes on your computer. To open Task Manager, right-click an empty area on the taskbar and then click Task Manager , or press Ctrl + Shift + Esc on your keyboard.
Risk level – In most cases, ESET Internet Security and ThreatSense technology assign risk levels to objects (files, processes, registry keys, etc.) using a series of heuristic rules that examine the characteristics of each object and then weigh their potential for malicious activity. Based on these heuristics, objects are assigned a risk level from 1 –
Fine (green) to 9 – Risky (red) .
NOTE
Known applications marked as Fine (green) are definitely clean (whitelisted) and will be excluded from scanning to improve performance.
PID – The process identifier number may be used as a parameter in various function calls such as adjusting the process's priority.
Number of users – The number of users that use a given application. This information is gathered by ThreatSense technology.
Time of discovery – Period of time since the application was discovered by ThreatSense technology.
NOTE
An application marked as Unknown (orange) is not necessarily malicious software. Usually it is just a newer application. If you are not sure about the file, you can
submit the file for analysis to the ESET Research Lab. If the
file turns out to be a malicious application, its detection will be added to an upcoming update.
Application name – The given name of a program or process.
Open in a new window – The running processes information will be opened in a new window.
Click an application to display the following details of that application:
·
Path – Location of an application on your computer.
·
Size – File size in B (bytes).
·
Description – File characteristics based on the description from the operating system.
·
Company – Name of the vendor or application process.
·
Version – Information from the application publisher.
·
Product – Application name and/or business name.
·
Created on/Modified on – Date and time of creation (modification).
NOTE
You can also check the reputation of files that do not act as running programs/processes. To do so, right-click them and select Advanced options > Check file reputation .
97
98
4.6.3.3 Security report
This feature gives an overview of the statistics for the following categories:
Web pages blocked – Displays the number of blocked web pages (blacklisted URL for PUA, phishing, hacked router, IP or certificate).
Infected email objects detected – Displays the number of infected mail objects that have been detected.
Web pages in Parental control blocked – Displays the number of blocked web pages in Parental control.
PUA detected – Displays the number of potentially unwanted applications (PUA).
Spam emails detected – Displays the number of detected spam emails.
Accesses to web cam blocked – Displays the number of blocked accesses to web cam.
Accesses to internet banking protected – Displays the number of protected accesses to internet banking.
Documents checked – Displays the number of scanned document objects.
Apps checked – Displays the number of scanned executable objects.
Other objects checked – Displays the number of other scanned objects.
Web pages objects checked – Displays the number of scanned web page objects.
Email objects checked – Displays the number of scanned email objects.
The order of these categories is based on the numeric value from the highest to the lowest. The categories with zero values are not displayed. Click Show more to expand and display hidden categories.
Below the categories, you can see the actual virus situation with the map of the world. The presence of virus in each country is indicated with color (the darker the color, the higher the number). Countries without data are grayed.
Hover mouse over the country displays data for the selected country. You can select the specific continent and it will be automatically zoomed.
The last part of the Security report offers you the possibility to activate the following features:
·
Password Manager
·
Secure Data
·
Parental Control
·
Anti-Theft
Once the feature is enabled, it is no more displayed as non-functional in the Security report.
Click the gear wheel in the upper right corner you can Enable/Disable Security report notifications or select whether the data will be displayed for the last 30 days or since the product was activated. If ESET Internet Security is installed less than 30 days, then only the number of days from installation can be selected. The period of 30 days is set by default.
Reset data will clear all statistics and remove the existing data for Security report. This action has to be confirmed except the case that you deselect the Ask before resetting statistics option in Advanced setup > User interface >
Alerts and notifications > Confirmation messages .
4.6.3.4 Watch activity
To see the current File system activity in graph form, click Tools > More tools > Watch activity . At the bottom of the graph is a timeline that records file system activity in real-time based on the selected time span. To change the time span, select from Refresh rate drop-down menu.
The following options are available:
·
Step: 1 second – The graph refreshes every second and the timeline covers the last 10 minutes.
·
Step: 1 minute (last 24 hours) – The graph is refreshed every minute and the timeline covers the last 24 hours.
·
Step: 1 hour (last month) – The graph is refreshed every hour and the timeline covers the last month.
·
Step: 1 hour (selected month) – The graph is refreshed every hour and the timeline covers the last X selected months.
The vertical axis of the File system activity graph represents read data (blue) and written data (red). Both values are given in KB (kilobytes)/MB/GB. If you mouse over either read data or written data in the legend below the graph, the graph will only display data for that activity type.
You can also select Network activity from the drop-down menu. The graph display and options for File system activity and Network activity are the same except that the latter displays received data (red) and sent data (blue).
99
4.6.3.5 Network connections
In the Network connections section, you can see a list of active and pending connections. This helps you control all applications establishing outgoing connections.
The first line displays the name of the application and its data transfer speed. To see the list of connections made by the application (and also more detailed information), click + .
Columns
Application/Local IP – Name of application, local IP addresses and communication ports.
Remote IP – IP address and port number of the particular remote computer.
Protocol – Transfer protocol used.
Up-Speed/Down-Speed – The current speed of outgoing and incoming data.
Sent/Received – Amount of data exchanged within the connection.
Show details – Choose this option to display detailed information about the selected connection.
Right-click on a connection to see additional options that include:
Resolve host names – If possible, all network addresses are displayed in DNS format, not in the numeral IP address format.
Show only TCP connections – The list only displays connections which belong to the TCP protocol suite.
Show listening connections – Select this option to only display connections, where no communication is currently established, but the system has opened a port and is waiting for a connection.
Show connections within the computer – Select this option to only show connections, where the remote side is a local system – so-called localhost connections.
Refresh speed – Choose the frequency to refresh the active connections.
100
Refresh now – Reloads the Network connections window.
The following options are available only after clicking on an application or process, not an active connection:
Temporarily deny communication for the process – Rejects current connections for the given application. If a new connection is established, the firewall uses a predefined rule. A description of the settings can be found in the
Configuring and using rules section.
Temporarily allow communication for the process – Permits current connections for the given application. If a new connection is established, the firewall uses a predefined rule. A description of the settings can be found in the
Configuring and using rules section.
4.6.3.6 ESET SysInspector
system components such as drivers and applications, network connections or important registry entries and assesses the risk level of each component. This information can help determine the cause of suspicious system behavior that may be due to software or hardware incompatibility or malware infection.
The SysInspector window displays the following information about created logs:
·
Time – The time of log creation.
·
Comment – A short comment.
·
User – The name of the user who created the log.
·
Status – The status of log creation.
The following actions are available:
·
Show – Opens created log. You can also right-click a given log file and select Show from the context menu.
·
Compare – Compares two existing logs.
·
Create...
– Creates a new log. Please wait until ESET SysInspector is finished (log status will display as Created ) before attempting to access the log.
·
Delete – Removes the selected log(s) from the list.
The following items are available from the context menu when one or more log files are selected:
·
Show – Opens the selected log in ESET SysInspector (same function as double-clicking a log).
·
Compare – Compares two existing logs.
·
Create...
– Creates a new log. Please wait until ESET SysInspector is finished (log status will display as Created ) before attempting to access the log.
·
Delete – Removes the selected log(s) from the list.
·
Delete all – Deletes all logs.
·
Export...
– Exports the log to an .xml
file or zipped .xml
.
4.6.3.7 Scheduler
Scheduler manages and launches scheduled tasks with predefined configuration and properties.
The Scheduler can be accessed from the ESET Internet Security main program window by clicking Tools > More Tools
> Scheduler . The Scheduler contains a list of all scheduled tasks and configuration properties such as the predefined date, time and scanning profile used.
The Scheduler serves to schedule the following tasks: update modules, scanning task, system startup file check and log maintenance. You can add or delete tasks directly from the main Scheduler window (click Add task or Delete at the bottom). You can revert the list of scheduled tasks to default and delete all changes by clicking Default . Right click anywhere in the Scheduler window to perform the following actions: display detailed information, perform the task immediately, add a new task, and delete an existing task. Use the checkboxes at the beginning of each entry to activate/deactivate the tasks.
101
By default, the following scheduled tasks are displayed in Scheduler :
·
Log maintenance
·
Regular automatic update
·
Automatic update after dial-up connection
·
Automatic update after user logon
·
Regular checking for latest product version
)
·
Automatic startup file check (after user logon)
·
Automatic startup file check (after successful update of the detection engine)
To edit the configuration of an existing scheduled task (both default and user-defined), right-click the task and click
Edit...
or select the task you want to modify and click Edit .
Add a new task
1. Click Add task at the bottom of the window.
2. Enter a name of the task.
3. Select the desired task from the pull-down menu:
·
Run external application – Schedules the execution of an external application.
·
Log maintenance – Log files also contains leftovers from deleted records. This task optimizes records in log files on a regular basis to work effectively.
·
System startup file check – Checks files that are allowed to run at system startup or logon.
·
Create a computer status snapshot – Creates an
ESET SysInspector computer snapshot – gathers detailed
information about system components (for example, drivers, applications) and assesses the risk level of each component.
·
On-demand computer scan – Performs a computer scan of files and folders on your computer.
·
Update – Schedules an Update task by updating the modules.
4. Turn on the Enabled switch if you want to activate the task (you can do this later by selecting/deselecting checkbox in the list of scheduled tasks), click Next and select one of the timing options:
·
Once – The task will be performed at the predefined date and time.
·
Repeatedly – The task will be performed at the specified time interval.
·
Daily – The task will run repeatedly each day at the specified time.
·
Weekly – The task will be run on the selected day and time.
·
Event triggered – The task will be performed on a specified event.
5. Select Skip task when running on battery power to minimize system resources while a laptop is running on battery power. The task will be run on the specified date and time in Task execution fields. If the task could not be run at the predefined time, you can specify when it will be performed again:
·
At the next scheduled time
·
As soon as possible
·
Immediately, if the time since the last run exceeds a specified value (the interval can be defined using the
Time since last run scroll box)
You can review scheduled task when right click and click Show task details .
102
4.6.3.8 System cleaner
System cleaner is a tool that helps you to restore the computer to usable state after cleaning the threat. Malware can disable system utilities such as Registry Editor, Task manager or Windows Updates. System cleaner restores the default values and settings for given system in a single click.
System cleaner reports issues from five settings categories:
·
Security settings : changes in settings which can cause an increased vulnerability of your computer, such as
Windows Update
·
System settings : changes in system settings, that can change behavior of your computer, such as file associations
·
System appearance : settings that affects how your system looks, such as your desktop wallpaper
·
Disabled features : important features and applications that may be disabled
·
Windows System Restore : settings for the Windows System Restore feature, that allows you to revert your system to a previous state
System cleaning can be requested:
· when a threat is found
· when a user clicks Reset
You can review the changes and reset settings if appropriate.
NOTE
Only a user with Administrator rights can perform actions in the System cleaner.
4.6.3.9 ESET SysRescue
ESET SysRescue is a utility that enables you to create a bootable disk containing one of the ESET Security solutions -
ESET NOD32 Antivirus, ESET Internet Security, ESET Smart Security, ESET Smart Security Premium or certain serveroriented products. The main advantage of ESET SysRescue is the fact that the ESET Security solution runs independent of the host operating system but has direct access to the disk and file system. This makes it possible to remove infiltrations which normally could not be deleted, for example, when the operating system is running, etc.
103
4.6.3.10 Cloud-based protection
ESET LiveGrid® (built on the ESET ThreatSense.Net advanced early warning system) utilizes data that ESET users have submitted worldwide and sends it to the ESET Research Lab. By providing suspicious samples and metadata from the wild, ESET LiveGrid® enables us to react immediately to needs of our customers and keep ESET responsive to the latest threats. Read more about ESET LiveGrid® in the
.
A user can check the reputation of
running processes and files directly from the program's interface or contextual
menu with additional information available from ESET LiveGrid®. There are two options:
1. You can choose not to enable ESET LiveGrid®. You will not lose any functionality in the software, but in some cases, ESET Internet Security may respond faster to new threats than detection engine update when ESET Live
Grid is enabled.
2. You can configure ESET LiveGrid® to submit anonymous information about new threats and where the new threatening code is contained. This file can be sent to ESET for detailed analysis. Studying these threats will help ESET update its threat detection capabilities.
ESET LiveGrid® will collect information about your computer related to newly-detected threats. This information may include a sample or copy of the file in which the threat appeared, the path to that file, the filename, the date and time, the process by which the threat appeared on your computer and information about your computer‘s operating system.
By default, ESET Internet Security is configured to submit suspicious files for detailed analysis to the ESET Virus Lab.
Files with certain extensions such as .doc
or .xls
are always excluded. You can also add other extensions if there are particular files that you or your organization want to avoid sending.
The ESET LiveGrid® reputation system provides cloud-based whitelisting and blacklisting. To access settings for ESET
LiveGrid®, press F5 to enter Advanced setup and expand Detection Engine > Cloud-based Protection .
Enable ESET LiveGrid® reputation system (recommended) – The ESET LiveGrid® reputation system improves the efficiency of ESET anti-malware solutions by comparing scanned files to a database of whitelisted and blacklisted items in the cloud.
Enable ESET LiveGrid® feedback system – Data will be sent to the ESET Research Lab for further analysis.
Submit crash reports and diagnostics data – Submit data such as crash reports, modules memory dumps.
Submit anonymous statistics – Allow ESET to collect information about newly detected threats such as the threat name, date and time of detection, detection method and associated metadata, product version, and configuration including information about your system.
Contact email (optional) – Your contact email can be included with any suspicious files and may be used to contact you if further information is required for analysis. Please note that you will not receive a response from ESET unless more information is needed.
Submission of samples
Submit infected samples – This will submit all infected samples to ESET for analysis and to improve future detection.
The following options are available:
·
All infected samples
·
All samples except documents
·
Do not submit
104
Submit suspicious samples
Executables – Includes files like .exe, .dll, .sys.
Archives – Includes filetypes like .zip, .rar, .7z, .arch, .arj, .bzip, .gzip, .ace, .arc, .cab.
Scripts – Includes filetypes like .bat, .cmd, .hta, .js, .vbs, .ps1.
Other – Includes filetypes like .jar, .reg, .msi, .sfw, .lnk.
Possible Spam emails – This will allow sending possible spam parts or whole possible spam emails with attachment to ESET for further analysis. Enabling this option improve Global detection of spam including improvements to future spam detection for you.
Documents – Include Microsoft Office documents or PDFs with active content.
Exclusions – The Exclusion filter allows you to exclude certain files/folders from submission (for example, it may be useful to exclude files that may carry confidential information, such as documents or spreadsheets). The files listed will never be sent to ESET labs for analysis, even if they contain suspicious code. The most common file types are excluded by default (.doc, etc.). You can add to the list of excluded files if desired.
If you have used ESET LiveGrid® before and have disabled it, there may still be data packages to send. Even after deactivating, such packages will be sent to ESET. Once all current information is sent, no further packages will be created.
4.6.3.10.1 Suspicious files
If you find a suspicious file, you can submit it for analysis to our ESET Research Lab. If it is a malicious application, its detection will be added to the next virus signature update.
Exclusion filter – The Exclusion filter allows you to exclude certain files/folders from submission. The files listed will never be sent to ESET Research Lab for analysis, even if they contain a suspicious code. For example, it may be useful to exclude files that may carry confidential information, such as documents or spreadsheets. The most common file types are excluded by default (.doc, etc.). You can add to the list of excluded files if desired.
Contact email (optional) – Your contact email can be included with any suspicious files and may be used to contact you if further information is required for analysis. Please note that you will not receive a response from ESET unless more information is needed.
Select Enable logging to create an event log to record file and statistical information submissions. This will enable
when files or statistics are sent.
105
4.6.3.11 Quarantine
The main function of the quarantine is to safely store infected files. Files should be quarantined if they cannot be cleaned, if it is not safe or advisable to delete them or if they are being falsely detected by ESET Internet Security.
You can choose to quarantine any file. This is advisable if a file behaves suspiciously but is not detected by the antivirus scanner. Quarantined files can be submitted for analysis to the ESET Research Lab.
Files stored in the quarantine folder can be viewed in a table that displays the date and time of quarantine, the path to the original location of the infected file, its size in bytes, reason (for example, object added by user), and number of threats (for example, if it is an archive containing multiple infiltrations).
Quarantining files
ESET Internet Security automatically quarantines deleted files (if you have not canceled this option in the alert window). If desired, you can quarantine any suspicious file manually by clicking Quarantine..
. If this is the case, the original file will not be removed from its original location. The context menu can also be used for this purpose; right-click in the Quarantine window and select Quarantine...
.
Restoring from Quarantine
Quarantined files can also be restored to their original location. Use the Restore feature for this purpose, which is available from the context menu by right-clicking a given file in the Quarantine window. If a file is marked as potentially unwanted application, the Restore and exclude from scanning option is enabled. Read more about this
type of application in the glossary . The context menu also offers the
Restore to... option which allows you to restore a file to a location other than the one from which it was deleted.
Deleting from Quarantine – Right-click on a given item and select Delete from Quarantine , or select the item you want to delete and press Delete on your keyboard. You can also select multiple items and delete them together.
NOTE
106
send the file to ESET Customer Care.
Submitting a file from the Quarantine
If you have quarantined a suspicious file that was not detected by the program, or if a file was determined to be infected incorrectly (for example, by heuristic analysis of the code) and subsequently quarantined, please send the file to the ESET Virus Lab. To submit a file from quarantine, right-click the file and select Submit for analysis from the context menu.
4.6.3.12 Proxy server
In large LAN networks, communication between your computer and the internet can be mediated by a proxy server.
Using this configuration, the following settings need to be defined. Otherwise the program will not be able to update itself automatically. In ESET Internet Security, proxy server setup is available from two different sections of the Advanced setup tree.
First, proxy server settings can be configured in Advanced setup under Tools > Proxy server . Specifying the proxy server at this level defines global proxy server settings for all of ESET Internet Security. Parameters here will be used by all modules that require a connection to the Internet.
To specify proxy server settings for this level, select Use proxy server and enter the address of the proxy server into the Proxy server field along with the Port number of the proxy server.
If communication with the proxy server requires authentication, select Proxy server requires authentication and enter a valid Username and Password into the respective fields. Click Detect to automatically detect and populate proxy server settings. The parameters specified in Internet Explorer will be copied.
NOTE
You must manually enter your Username and Password in Proxy server settings.
Use direct connection if proxy is not available – If a product is configured to utilize HTTP Proxy and the proxy is unreachable, the product will bypass the proxy and communicate directly with ESET servers.
Proxy server settings can also be established from Advanced update setup ( Advanced setup > Update > Profiles >
Updates > Connection options by selecting Connection through a proxy server from the Proxy mode drop-down menu). This setting applies for the given update profile and is recommended for laptops that often receive virus signature updates from remote locations. For more information about this setting, see
.
107
4.6.3.13 Email notifications
ESET Internet Security can automatically send notification emails if an event with the selected verbosity level occurs. Enable Send event notifications by email to activate email notifications.
SMTP server
SMTP server – The SMTP server used for sending notifications (e.g. smtp.provider.com:587 , predefined port is 25).
NOTE
SMTP servers with TLS encryption are supported by ESET Internet Security.
Username and password – If the SMTP server requires authentication, these fields should be filled in with a valid username and password to access the SMTP server.
Sender address – Define the sender address that will be displayed in the header of notification emails.
Recipient addresses – Define the recipient addresses that will be displayed in the header of notification emails.
Multiple values are supported, please use semi-collon as separator.
From the Minimum verbosity for notifications drop-down menu, you can select the starting severity level of notifications to be sent.
·
Diagnostic – Logs information needed to fine-tune the program and all records above.
·
Informative – Records informative messages such as non-standard network events, including successful update messages, plus all records above.
·
Warnings – Records critical errors and warning messages (Antistealth is not running properly or update failed).
·
Errors – Errors (document protection not started) and critical errors will be recorded.
·
Critical – Logs only critical errors error starting antivirus protection or infected system.
Enable TLS – Enable sending alert and notification messages supported by TLS encryption.
Interval after which new notification emails will be sent (min) – Interval in minutes after which new notifications will be sent to email. If you set this value to 0, the notifications will be sent immediately.
108
Send each notification in a separate email – When enabled, the recipient will receive a new email for each individual notification. This may result in large number of emails being received in a short period of time.
Message format
Format of event messages – Format of event messages that are displayed on remote computers.
Format of threat warning messages – Threat alert and notification messages have a predefined default format. We advise against changing this format. However, in some circumstances (for example, if you have an automated email processing system), you may need to change the message format.
Charset – Converts an email message to the ANSI character encoding based upon Windows Regional settings (for example, windows-1250), Unicode (UTF-8), ACSII 7-bit (for example "á" will be changed to "a" and an unknown symbol to "?") or Japanese (ISO-2022-JP).
Use Quoted-printable encoding – The email message source will be encoded to Quoted-printable (QP) format which uses ASCII characters and can correctly transmit special national characters by email in 8-bit format (áéíóú).
4.6.3.13.1 Message format
Here you can set up the format of event messages that are displayed on remote computers.
Threat alert and notification messages have a predefined default format. We advise against changing this format.
However, in some circumstances (for example, if you have an automated email processing system), you may need to change the message format.
Keywords (strings separated by % signs) are replaced in the message by the actual information as specified. The following keywords are available:
·
%TimeStamp% – Date and time of the event
·
%Scanner% – Module concerned
·
%ComputerName% – Name of the computer where the alert occurred
·
%ProgramName% – Program that generated the alert
·
%InfectedObject% – Name of infected file, message, etc
·
%VirusName% – Identification of the infection
·
%Action% – Action taken over infiltration
·
%ErrorDescription% – Description of a non-virus event
The keywords %InfectedObject% and %VirusName% are only used in threat warning messages, and %
ErrorDescription% is only used in event messages.
Use local alphabetic characters – Converts an email message to the ANSI character encoding based upon Windows
Regional settings (e.g. windows-1250). If you leave this deselected, a message will be converted and encoded in
ACSII 7-bit (for example "á" will be changed to "a" and an unknown symbol to "?").
Use local character encoding – The email message source will be encoded to Quoted-printable (QP) format which uses ASCII characters and can correctly transmit special national characters by email in 8-bit format (áéíóú).
4.6.3.14 Select sample for analysis
The file submission dialog enables you to send a file or a site to ESET for analysis and can be found in Tools > Submit sample for analysis . If you find a suspiciously behaving file on your computer or suspicious site on the Internet, you can submit it to the ESET Research Lab for analysis. If the file turns out to be a malicious application or website, its detection will be added to an upcoming update.
Alternatively, you can submit the file by email. If you prefer this option, pack the file(s) using WinRAR/ZIP, protect the archive with the password "infected" and send it to [email protected]
. Please remember to use a descriptive subject and enclose as much information about the file as possible (for example, the website you downloaded it from).
NOTE
Before submitting a file to ESET, make sure it meets one or more of the following criteria:
109
· the file is not detected at all
· the file is incorrectly detected as a threat
You will not receive a response unless further information is required for analysis.
Select the description from the Reason for submitting the file drop-down menu that best fits your message:
·
Suspicious file
·
Suspicious site (a website that is infected by any malware),
·
False positive file (file that is detected as an infection but are not infected),
·
False positive site
·
Other
File/Site – The path to the file or website you intend to submit.
Contact email – This contact email is sent along with suspicious files to ESET and may be used to contact you if further information is required for analysis. Entering a contact email is optional. The sample can be submitted anonymously . You will not get a response from ESET unless more information is required, since each day our servers receive tens of thousands of files, making it impossible to reply to all submissions.
4.6.3.15 Microsoft Windows® update
The Windows update feature is an important component of protecting users from malicious software. For this reason, it is vital that you install Microsoft Windows updates as soon as they become available. ESET Internet
Security notifies you about missing updates according to the level you specify. The following levels are available:
·
No updates – No system updates will be offered for download.
·
Optional updates – Updates marked as low priority and higher will be offered for download.
·
Recommended updates – Updates marked as common and higher will be offered for download.
·
Important updates – Updates marked as important and higher will be offered for download.
·
Critical updates – Only critical updates will be offered for download.
Click OK to save changes. The System updates window will be displayed after status verification with the update server. Accordingly, the system update information may not be immediately available after saving changes.
4.6.3.16 ESET CMD
This is a feature that enables advanced ecmd commands. It allows you to export and import settings using the
configuration can be exported to an .
xml file.
When you have enabled ESET CMD, there are two authorization methods available:
·
None – no authorization. We do not recommend you this method because it allows importation of any unsigned configuration, which is a potential risk.
·
Advanced setup password – a password is required to import a configuration from an .
xml file, this file must be signed (see signing .
xml configuration file further down). The password specified in
provided before a new configuration can be imported. If you do not have access setup enabled, your password does not match or the .
xml configuration file is not signed, the configuration will not be imported.
Once ESET CMD is enabled, you can use the command line to import or export ESET Internet Security configurations.
You can do it manually or create a script for the purpose of automation.
IMPORTANT
To use advanced ecmd commands, you need to run them with administrator privileges, or open a Windows
Command Prompt (cmd) using Run as administrator . Otherwise, you'll get Error executing command.
message.
Also, when exporting a configuration, the destination folder must exist. The export command still works when the ESET CMD setting is switched off.
110
EXAMPLE
Export settings command: ecmd /getcfg c:\config\settings.xml
Import settings command: ecmd /setcfg c:\config\settings.xml
NOTE
Advanced ecmd commands can only be run locally.
Signing an .
xml configuration file:
1. Download the XmlSignTool executable.
2. Open a Windows Command Prompt (cmd) using Run as administrator .
3. Navigate to the save location of xmlsigntool.exe
4. Execute a command to sign the .
xml configuration file, usage: xmlsigntool /version 1|2
<xml_file_path>
IMPORTANT
The value of the /version parameter depends on your version of ESET Internet Security. Use /version 1 for earlier versions of ESET Internet Security than 11.1. Use /version 2 for the current version of ESET Internet
Security.
5. Enter and Re-enter your Advanced Setup
Password when prompted by the XmlSignTool. Your .
xml configuration file is now signed and can be used to import another instance of ESET Internet Security with ESET
CMD using the password authorization method.
EXAMPLE
Sign exported configuration file command: xmlsigntool /version 1 c:\config\settings.xml
111
NOTE
password, you need to sign the .
xml configuration file again using your current password. This allows you to use an older configuration file without exporting it to another machine running ESET Internet Security before the import.
4.7 User interface
The User interface section allows you to configure the behavior of the program's Graphical user interface (GUI).
Using the
Graphics tool, you can adjust the program's visual appearance and effects used.
By configuring
Alerts and notifications , you can change the behavior of detected threat alerts and system
notifications. These can be customized to fit your needs.
To provide maximum security of your security software, you can prevent any unauthorized changes by protecting the settings by a password using the
tool.
4.7.1 User interface elements
User interface configuration options in ESET Internet Security allow you to adjust the working environment to fit your needs. These configuration options are accessible in the Advanced setup > User interface > User interface elements .
If you want to deactivate the ESET Internet Security splash-screen, deselect Show splash-screen at startup .
To have ESET Internet Security play a sound when important events occur during a scan, for example when a threat is discovered or when the scan has finished, select Use sound signal .
Integrate into the context menu – Integrate the ESET Internet Security control elements into the context menu.
Statuses
Application statuses – Click Edit button to manage (disable) statuses that are displayed in the first pane pane in main menu.
112
4.7.2 Alerts and notifications
The Alerts and notifications section under User interface allows you to configure how threat alerts and system notifications (for example, successful update messages) are handled by ESET Internet Security. You can also set the display time and transparency of system tray notifications (this applies only on systems that support system tray notifications).
113
Alert windows
Disabling Display alerts will cancel all alert windows, and is only suitable for a limited amount of specific situations. For most users, we recommend that this option be left in its default setting (enabled).
In-product messaging
Display marketing messages – In-product messaging has been designed to inform users of ESET news and other communications. Sending marketing messages requires the consent of a user. Therefore, marketing messages are not sent to a user by default (shown as a question mark). By enabling this option, you agree to receive ESET marketing messages. If you are not interested in receiving ESET marketing material, disable the option.
Desktop notifications
Notifications on the Desktop and balloon tips are informative only, and do not require user interaction. They are displayed in the notification area at the bottom right corner of the screen. To activate Desktop notifications, select Display notifications on desktop .
Enable Do not display notifications when running applications in full-screen mode to suppress all noninteractive notifications. More detailed options, such as notification display time and window transparency can be modified below.
Display Security report notifications – You can enable or disable Security report notifications.
The Minimum verbosity of events to display drop-down menu allows you to select the severity level of alerts and notifications to be displayed. The following options are available:
·
Diagnostic – Logs information needed to fine-tune the program and all records above.
·
Informative – Records informative messages, including successful update messages, plus all records above.
·
Warnings – Records critical errors and warning messages.
·
Errors – Errors such as "Error downloading file" and critical errors will be recorded.
·
Critical – Logs only critical errors (error starting antivirus protection, built-in firewall, etc...).
The last feature in this section allows you to configure the destination of notifications in a multi-user environment. The On multi-user systems, display notifications on the screen of this user field specifies which user will receive system and other notifications on systems allowing multiple users to connect at the same time.
Normally, this would be a system or network administrator. This option is especially useful for terminal servers, provided that all system notifications are sent to the administrator.
Message boxes
To close pop-up windows automatically after a certain period of time, select Close message boxes automatically . If they are not closed manually, alert windows are automatically closed after the specified time period elapses.
Confirmation messages – Shows you a list of confirmation messages that you can select to display or not to display.
4.7.2.1 Advanced setup
From the Minimum verbosity of events to display drop-down menu, you can select the starting severity level of alerts and notification to be displayed.
·
Diagnostic – Logs information needed to fine-tune the program and all records above.
·
Informative – Records informative messages, including successful update messages, plus all records above.
·
Warnings – Records critical errors and warning messages.
·
Errors – Errors such as "Error downloading f ile" and critical errors will be recorded.
·
Critical – Logs only critical errors (error starting Antivirus protection, Firewall, etc...).
The last feature in this section allows you to configure the destination of notifications in a multi-user environment.
The On multi-user systems, display notifications on the screen of this user field specifies a user who will receive system and other notifications on systems allowing multiple users to connect at the same time. Normally, this
114
would be a system or network administrator. This option is especially useful for terminal servers, provided that all system notifications are sent to the administrator.
4.7.3 Access setup
ESET Internet Security settings are a crucial part of your security policy. Unauthorized modifications can potentially endanger the stability and protection of your system. To avoid unauthorized modifications, the setup parameters of
ESET Internet Security can be password protected.
Password protect settings – Indicate password settings. Click to open the Password setup window.
To set or change a password to protect setup parameters, click Set .
NOTE
When you want to access protected Advanced setup, the window for entering the password is displayed. If you forget or lose your password, click the Restore password option below and enter the email address you used for license registration. ESET will send you an email with the verification code and instruction on how to reset your password. For more information click
Require full administrator rights for limited administrator accounts – Select this to prompt the current user (if he or she does not have administrator rights) to enter an administrator username and password when modifying certain system parameters (similar to the User Account Control (UAC) in Windows Vista and Windows 7). Such modifications include disabling protection modules or turning off the firewall. On Windows XP systems where UAC is not running, users will have the Require administrator rights (system without UAC support) option available.
For Windows XP only:
Require administrator rights (system without UAC support) – Enable this option to have ESET Internet Security prompt for administrator credentials.
115
4.7.4 Program menu
Some of the most important setup options and features are available by right-clicking the system tray icon .
Quick links – Displays the most frequently used parts of ESET Internet Security. You can quickly access these from the program menu.
Pause protection
– Displays the confirmation dialog box that disables Antivirus and antispyware protection
, which guards against malicious system attacks by controlling file, web and email communication.
The Time interval drop-down menu represents the period of time that Antivirus and antispyware protection will be disabled for.
Pause firewall (allow all traffic)
– Switches the firewall to an inactive state. See Network for more information.
Block all network traffic – Blocks all network traffic. You can re-enable it by clicking Stop blocking all network traffic .
Advanced setup – Select this option to enter the Advanced setup tree. There are also other ways to open Advanced setup, such as pressing the F5 key or navigating to Setup > Advanced setup .
Log files
– Log files contain information about important program events that have occurred and provide an
overview of detected threats.
Hide ESET Internet Security – Hide the ESET Internet Security window from the screen.
116
Reset window layout – Resets the ESET Internet Security's window to its default size and position on the screen.
Check for updates – Starts updating the detection engine (previously known as "virus signature database") to ensure your level of protection against malicious code.
About – Provides system information, details about the installed version of ESET Internet Security and the installed program modules. Here you can also find the license expiration date and information about the operating system and system resources.
117
5. Advanced user
5.1 Profiles
Profile manager is used in two places within ESET Internet Security – in the On-demand computer scan section and in the Update section.
Computer scan
Your preferred scan parameters can be saved for future scanning. We recommend that you create a different profile
(with various scan targets, scan methods and other parameters) for each regularly used scan.
To create a new profile, open the Advanced setup window (F5) and click Detection engine > Malware scans > Ondemand scan > List of profiles . The Profile manager window includes the Selected profile drop-down menu that lists existing scan profiles and the option to create a new one. To help you create a scan profile to fit your needs, see the
ThreatSense engine parameters setup section for a description of each parameter of the scan setup.
NOTE
Suppose that you want to create your own scan profile and the Scan your computer configuration is partially suitable, but you don’t want to scan runtime packers or potentially unsafe applications and you also want to apply Strict cleaning . Enter the name of your new profile in the Profile manager window and click Add . Select your new profile from the Selected profile drop-down menu and adjust the remaining parameters to meet your requirements and click OK to save your new profile.
Update
The profile editor in the Update setup section allows users to create new update profiles. Create and use your own custom profiles (other than the default My profile ) only if your computer uses multiple means to connect to update servers.
For example, a laptop that normally connects to a local server (Mirror) in the local network but downloads updates directly from ESET update servers when disconnected from the local network (business trip) might use two profiles: the first one for connecting to the local server; the other one for connecting to ESET servers. Once these profiles are configured, navigate to Tools > Scheduler and edit the update task parameters. Designate one profile as primary and the other as secondary.
Update profile – The currently used update profile. To change it, choose a profile from the drop-down menu.
List of profiles – Create new or remove existing update profiles.
5.2 Keyboard shortcuts
For better navigation in your ESET product, the following keyboard shortcuts can be used:
F1
F5
Ctrl+U
Ctrl+R opens help pages opens Advanced setup
Up/Down navigation in product through items
collapses Advanced setup tree nodes
TAB
Esc moves the cursor in a window closes the active dialog window shows information about license (Details for Customer Care) resets product window to its default size and position on the screen
118
5.3 Diagnostics
Diagnostics provides application crash dumps of ESET processes (for example, ekrn ). If an application crashes, a dump will be generated. This can help developers debug and fix various ESET Internet Security problems. Click the drop-down menu next to Dump type and select one of three available options:
·
Select Disable (default) to disable this feature.
·
Mini – Records the smallest set of useful information that may help identify why the application crashed unexpectedly. This kind of dump file can be useful when space is limited, however because of the limited information included, errors that were not directly caused by the thread that was running at the time of the problem may not be discovered by an analysis of this file.
·
Full – Records all the contents of system memory when the application stops unexpectedly. A complete memory dump may contain data from processes that were running when the memory dump was collected.
Enable Network protection advanced logging – Record all network data passing through Firewall in PCAP format in order to help developers diagnose and fix problems related to Firewall.
Enable Protocol filtering advanced logging – Record all data passing through the Protocol filtering engine in PCAP format in order to help the developers diagnose and fix the problems related to Protocol filtering.
Enable Update engine advanced logging – Record all events that occur during update process. This can help developers diagnose and fix problems related to the Update engine.
Enable Parental control advanced logging – Record all events that occur in Parental control. This can help developers diagnose and fix problems related to Parental control.
Enable Licensing advanced logging – Record all product communication with license server.
Enable Anti-Theft engine advanced logging – Record all events that occur in Anti-Theft to allow diagnosing and solving problems.
Enable Antispam engine advanced logging – Record all events that occur during antispam scanning. This can help developers to diagnose and fix problems related to ESET Antispam engine.
Enable Operating System advanced logging – Additional information about Operating system such as running processes, CPU activity, disc operations will be gathered. This can help developers to diagnose and fix problems related to ESET product running on your operating system (available for Windows 10).
Log files can be found in:
C:\ProgramData\ESET\ESET Internet Security\Diagnostics\ in Windows Vista and later or C:\Documents and
Settings\All Users\...
in earlier versions of Windows.
Target directory – Directory where the dump during the crash will be generated.
Open diagnostics folder – Click Open to open this directory in a new Windows explorer window.
Create diagnostic dump – Click Create to create diagnostic dump files in the Target directory .
119
5.4 Import and export settings
You can import or export your customized ESET Internet Security .xml configuration file from the Setup menu.
Importing and exporting of configuration files is useful if you need to backup your current configuration of ESET
Internet Security for use at a later time. The export settings option is also convenient for users who want to use their preferred configuration on multiple systems, they can easily import an .xml
file to transfer these settings.
Importing a configuration is very easy. In the main program window click Setup > Import and export settings , and then select Import settings . Enter the file name of the configuration file or click the ...
button to browse for the configuration file you want to import.
The steps to export a configuration are very similar. In the main program window, click Setup > Import and export settings . Select Export settings and enter the file name of the configuration file (i.e. export.xml
). Use the browser to select a location on your computer to save the configuration file.
NOTE
You may encounter an error while exporting settings if you do not have enough rights to write the exported file to specified directory.
5.5 ESET SysInspector
5.5.1 Introduction to ESET SysInspector
ESET SysInspector is an application that thoroughly inspects your computer and displays gathered data in a comprehensive way. Information like installed drivers and applications, network connections or important registry entries can help you to investigate suspicious system behavior be it due to software or hardware incompatibility or malware infection.
You can access ESET SysInspector two ways: From the integrated version in ESET Security solutions or by downloading the standalone version (SysInspector.exe) for free from ESET’s website. Both versions are identical in function and have the same program controls. The only difference is how outputs are managed. The standalone and integrated versions each allow you to export system snapshots to an .xml
file and save them to disk. However, the integrated version also allows you to store your system snapshots directly in Tools > ESET SysInspector (except ESET
Remote Administrator).
Please allow some time while ESET SysInspector scans your computer. It may take anywhere from 10 seconds up to a few minutes depending on your hardware configuration, operating system and the number of applications installed on your computer.
120
5.5.1.1 Starting ESET SysInspector
To start ESET SysInspector, simply run the SysInspector.exe
executable you downloaded from ESET's website.
Please wait while the application inspects your system, which could take up to several minutes.
5.5.2 User Interface and application usage
For clarity the main program window is divided into four major sections – Program Controls located on the top of the main program window, Navigation window to the left, the Description window to the right and the Details window at the bottom of the main program window. The Log Status section lists the basic parameters of a log (filter used, filter type, is the log a result of a comparison etc.).
5.5.2.1 Program Controls
This section contains the description of all program controls available in ESET SysInspector.
File
By clicking File you can store your current system status for later investigation or open a previously stored log. For publishing purposes we recommend that you generate a log Suitable for sending . In this form, the log omits sensitive information (current user name, computer name, domain name, current user privileges, environment variables, etc.).
NOTE: You may open previously stored ESET SysInspector reports by dragging and dropping them into the main program window.
Tree
Enables you to expand or close all nodes and export selected sections to Service script.
121
List
Contains functions for easier navigation within the program and various other functions like finding information online.
Help
Contains information about the application and its functions.
Detail
This setting influences the information displayed in the main program window to make the information easier to work with. In "Basic" mode, you have access to information used to find solutions for common problems in your system. In the "Medium" mode, the program displays less used details. In "Full" mode, ESET SysInspector displays all the information needed to solve very specific problems.
Filtering
Item filtering is best used to find suspicious files or registry entries in your system. By adjusting the slider, you can filter items by their Risk Level. If the slider is set all the way to the left (Risk Level 1), then all items are displayed. By moving the slider to the right, the program filters out all items less risky than current risk level and only display items which are more suspicious than the displayed level. With the slider all the way to the right, the program displays only known harmful items.
All items labeled as risk 6 to 9 can pose a security risk. If you are not using a security solution from ESET, we recommend that you scan your system with ESET Online Scanner if ESET SysInspector has found any such item. ESET
Online Scanner is a free service.
NOTE: The Risk level of an item can be quickly determined by comparing the color of the item with the color on the
Risk Level slider.
Compare
When comparing two logs, you can choose to display all items, display only added items, display only removed items or to display only replaced items.
Find
Search can be used to quickly find a specific item by its name or part of its name. The results of the search request are displayed in the Description window.
Return
By clicking the back or forward arrows, you can return to previously displayed information in the Description window. You can use the backspace and space keys instead of clicking back and forward.
Status section
Displays the current node in Navigation window.
Important: Items highlighted in red are unknown, which is why the program marks them as potentially dangerous. If an item is in red, it does not automatically mean that you can delete the file. Before deleting, please make sure that files are really dangerous or unnecessary.
122
5.5.2.2 Navigating in ESET SysInspector
ESET SysInspector divides various types of information into several basic sections called nodes. If available, you may find additional details by expanding each node into its subnodes. To open or collapse a node, double-click the name of the node or click or next to the name of the node. As you browse through the tree structure of nodes and subnodes in the Navigation window you may find various details for each node shown in the Description window. If you browse through items in the Description window, additional details for each item may be displayed in the
Details window.
The following are the descriptions of the main nodes in the Navigation window and related information in the
Description and Details windows.
Running processes
This node contains information about applications and processes running at the time of generating the log. In the
Description window you may find additional details for each process such as dynamic libraries used by the process and their location in the system, the name of the application's vendor and the risk level of the file.
The Detail window contains additional information for items selected in the Description window such as the file size or its hash.
NOTE: An operating system is comprised of several important kernel components running constantly that provide basic and vital functions for other user applications. In certain cases, such processes are displayed in the tool ESET
SysInspector with file path beginning with \??\. Those symbols provide pre-launch optimization for those processes; they are safe for the system.
Network connections
The Description window contains a list of processes and applications communicating over the network using the protocol selected in the Navigation window (TCP or UDP) along with the remote address where to which the application is connected to. You can also check the IP addresses of DNS servers.
The Detail window contains additional information for items selected in the Description window such as the file size or its hash.
Important Registry Entries
Contains a list of selected registry entries which are often related to various problems with your system like those specifying startup programs, browser helper objects (BHO), etc.
In the Description window you may find which files are related to specific registry entries. You may see additional details in the Details window.
Services
The Description window Contains a list of files registered as windows Services. You may check the way the service is set to start along with specific details of the file in the Details window.
Drivers
A list of drivers installed in the system.
Critical files
The Description window displays content of critical files related to the Microsoft windows operating system.
System Scheduler Tasks
Contains a list of tasks triggered by Windows Task Scheduler at a specified time/interval.
123
System information
Contains detailed information about hardware and software along with information about set environmental variables, user rights and system event logs.
File details
A list of important system files and files in the Program Files folder. Additional information specific for the files can be found in the Description and Details windows.
About
Information about version of ESET SysInspector and the list of program modules.
5.5.2.2.1 Keyboard shortcuts
Key shortcuts that can be used when working with the ESET SysInspector include:
File
Ctrl+O
Ctrl+S opens existing log saves created logs
Generate
Ctrl+G
Ctrl+H generates a standard computer status snapshot generates a computer status snapshot that may also log sensitive information
Item Filtering
1, O
2
5
6
3
4, U
9
-
7, B
8
+
Ctrl+9
Ctrl+0 fine, risk level 1-9 items are displayed fine, risk level 2-9 items are displayed fine, risk level 3-9 items are displayed unknown, risk level 4-9 items are displayed unknown, risk level 5-9 items are displayed unknown, risk level 6-9 items are displayed risky, risk level 7-9 items are displayed risky, risk level 8-9 items are displayed risky, risk level 9 items are displayed decreases risk level increases risk level filtering mode, equal level or higher filtering mode, equal level only
View
Ctrl+5
Ctrl+6
Ctrl+7 view by vendor, all vendors view by vendor, only Microsoft view by vendor, all other vendors
Ctrl+3
Ctrl+2 displays full detail displays medium detail
Ctrl+1 basic display
BackSpace moves one step back
Space
Ctrl+W
Ctrl+Q moves one step forward expands tree collapses tree
Other controls
Ctrl+T
Ctrl+P goes to the original location of item after selecting in search results displays basic information about an item
124
Ctrl+A
Ctrl+C
Ctrl+X
Ctrl+B
Ctrl+L
Ctrl+R
Ctrl+Z
Ctrl+F
Ctrl+D
Ctrl+E
Comparing
Ctrl+Alt+O
Ctrl+Alt+R
Ctrl+Alt+1
Ctrl+Alt+2
Ctrl+Alt+3
Ctrl+Alt+4
Ctrl+Alt+5
Ctrl+Alt+C
Ctrl+Alt+N
Ctrl+Alt+P displays full information about an item copies the current item's tree copies items finds information about selected files on the Internet opens the folder where the selected file is located opens the corresponding entry in the registry editor copies a path to a file (if the item is related to a file) switches to the search field closes search results run service script opens original / comparative log cancels comparison displays all items displays only added items, log will show items present in current log displays only removed items, log will show items present in previous log displays only replaced items (files inclusive) displays only differences between logs displays comparison displays current log opens previous log
Miscellaneous
F1
Alt+F4
Alt+Shift+F4
Ctrl+I view help close program close program without asking log statistics
5.5.2.3 Compare
The Compare feature allows the user to compare two existing logs. The outcome of this feature is a set of items not common to both logs. It is suitable if you want to keep track of changes in the system, a helpful tool for detecting malicious code.
After it is launched, the application creates a new log which is displayed in a new window. Click File > Save log to save a log to a file. Log files can be opened and viewed at a later time. To open an existing log, click File > Open log .
In the main program window, ESET SysInspector always displays one log at a time.
The benefit of comparing two logs is that you can view a currently active log and a log saved in a file. To compare logs, click File > Compare log and choose Select file . The selected log will be compared to the active one in the main program windows. The comparative log will display only the differences between those two logs.
NOTE: If you compare two log files, click File > Save log to save it as a ZIP file; both files will be saved. If you open this file later, the contained logs are automatically compared.
Next to the displayed items, ESET SysInspector shows symbols identifying differences between the compared logs.
Description of all symbols that can be displayed next to items:
·
new value, not present in the previous log
·
tree structure section contains new values
·
removed value, present in the previous log only
·
tree structure section contains removed values
·
value / file has been changed
·
tree structure section contains modified values / files
·
the risk level has decreased / it was higher in the previous log
·
the risk level has increased / it was lower in the previous log
125
The explanation section displayed in the left bottom corner describes all symbols and also displays the names of logs which are being compared.
Any comparative log can be saved to a file and opened at a later time.
Example
Generate and save a log, recording original information about the system, to a file named previous.xml. After changes to the system have been made, open ESET SysInspector and allow it to generate a new log. Save it to a file named current.xml
.
In order to track changes between those two logs, click File > Compare logs . The program will create a comparative log showing differences between the logs.
The same result can be achieved if you use the following command line option:
SysIsnpector.exe current.xml previous.xml
5.5.3 Command line parameters
ESET SysInspector supports generating reports from the command line using these parameters:
/gen
/privacy
/zip
/silent
/blank generate log directly from the command line without running GUI generate log with sensitive information omitted save outcome log in compressed zip archive suppress progress window when generating log from the command line launch ESET SysInspector without generating/loading log
Examples
Usage:
Sysinspector.exe [load.xml] [/gen=save.xml] [/privacy] [/zip] [compareto.xml]
To load specific log directly into the browser, use: SysInspector.exe .\clientlog.xml
To generate log from the command line, use: SysInspector.exe /gen=.\mynewlog.xml
To generate log excluding sensitive information directly in a compressed file, use: SysInspector.exe /gen=.
\mynewlog.zip /privacy /zip
To compare two log files and browse differences, use: SysInspector.exe new.xml old.xml
NOTE: If the name of the file/folder contains a gap, then should be taken into inverted commas.
126
5.5.4 Service Script
Service script is a tool that provides help to customers that use ESET SysInspector by easily removing unwanted objects from the system.
Service script enables the user to export the entire ESET SysInspector log, or its selected parts. After exporting, you can mark unwanted objects for deletion. You can then run the modified log to delete marked objects.
Service Script is suited for advanced users with previous experience in diagnosing system issues. Unqualified modifications may lead to operating system damage.
Example
If you suspect that your computer is infected by a virus which is not detected by your antivirus program, follow the step-by-step instructions below:
1. Run ESET SysInspector to generate a new system snapshot.
2. Select the first item in the section on the left (in the tree structure), press Shift and select the last item to mark all items.
3. Right click the selected objects and select Export Selected Sections To Service Script .
4. The selected objects will be exported to a new log.
5. This is the most crucial step of the entire procedure: open the new log and change the – attribute to + for all objects you want to remove. Please make sure you do not mark any important operating system files/objects.
6. Open ESET SysInspector, click File > Run Service Script and enter the path to your script.
7. Click OK to run the script.
5.5.4.1 Generating Service script
To generate a script, right-click any item from the menu tree (in the left pane) in the ESET SysInspector main window. From the context menu, select either Export All Sections To Service Script or Export Selected Sections To
Service Script .
NOTE: It is not possible to export the service script when two logs are being compared.
5.5.4.2 Structure of the Service script
In the first line of the script’s header, you can find information about the Engine version (ev), GUI version (gv) and the Log version (lv). You can use this data to track possible changes in the .xml file that generates the script and prevent any inconsistencies during execution. This part of the script should not be altered.
The remainder of the file is divided into sections in which items can be edited (denote those that will be processed by the script). You mark items for processing by replacing the “-” character in front of an item with a “+” character.
Sections in the script are separated from each other by an empty line. Each section has a number and title.
01) Running processes
This section contains a list of all processes running in the system. Each process is identified by its UNC path and, subsequently, its CRC16 hash code in asterisks (*).
Example:
01) Running processes:
- \SystemRoot\System32\smss.exe *4725*
- C:\Windows\system32\svchost.exe *FD08*
+ C:\Windows\system32\module32.exe *CF8A*
[...]
In this example a process, module32.exe, was selected (marked by a “+” character); the process will end upon execution of the script.
127
02) Loaded modules
This section lists currently used system modules.
Example:
02) Loaded modules:
- c:\windows\system32\svchost.exe
- c:\windows\system32\kernel32.dll
+ c:\windows\system32\khbekhb.dll
- c:\windows\system32\advapi32.dll
[...]
In this example the module khbekhb.dll was marked by a “+”. When the script runs, it will recognize the processes using that specific module and end them.
03) TCP connections
This section contains information about existing TCP connections.
Example:
03) TCP connections:
- Active connection: 127.0.0.1:30606 -> 127.0.0.1:55320, owner: ekrn.exe
- Active connection: 127.0.0.1:50007 -> 127.0.0.1:50006,
- Active connection: 127.0.0.1:55320 -> 127.0.0.1:30606, owner: OUTLOOK.EXE
- Listening on *, port 135 (epmap), owner: svchost.exe
+ Listening on *, port 2401, owner: fservice.exe Listening on *, port 445
(microsoft-ds), owner: System
[...]
When the script runs, it will locate the owner of the socket in the marked TCP connections and stop the socket, freeing system resources.
04) UDP endpoints
This section contains information about existing UDP endpoints.
Example:
04) UDP endpoints:
- 0.0.0.0, port 123 (ntp)
+ 0.0.0.0, port 3702
- 0.0.0.0, port 4500 (ipsec-msft)
- 0.0.0.0, port 500 (isakmp)
[...]
When the script runs, it will isolate the owner of the socket at the marked UDP endpoints and stop the socket.
05) DNS server entries
This section contains information about the current DNS server configuration.
Example:
05) DNS server entries:
+ 204.74.105.85
- 172.16.152.2
[...]
Marked DNS server entries will be removed when you run the script.
06) Important registry entries
This section contains information about important registry entries.
128
Example:
06) Important registry entries:
* Category: Standard Autostart (3 items)
HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- HotKeysCmds = C:\Windows\system32\hkcmd.exe
- IgfxTray = C:\Windows\system32\igfxtray.exe
HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- Google Update = “C:
\Users\antoniak\AppData\Local\Google\Update\GoogleUpdate.exe” /c
* Category: Internet Explorer (7 items)
HKLM\Software\Microsoft\Internet Explorer\Main
+ Default_Page_URL = http://thatcrack.com/
[...]
The marked entries will be deleted, reduced to 0-byte values or reset to their default values upon script execution.
The action to be applied to a particular entry depends on the entry category and key value in the specific registry.
07) Services
This section lists services registered within the system.
Example:
07) Services:
- Name: Andrea ADI Filters Service, exe path: c:\windows\system32\aeadisrv.exe, state: Running, startup: Automatic
- Name: Application Experience Service, exe path: c:
\windows\system32\aelupsvc.dll, state: Running, startup: Automatic
- Name: Application Layer Gateway Service, exe path: c:
\windows\system32\alg.exe, state: Stopped, startup: Manual
[...]
The services marked and their dependent services will be stopped and uninstalled when the script is executed.
08) Drivers
This section lists installed drivers.
Example:
08) Drivers:
- Name: Microsoft ACPI Driver, exe path: c:\windows\system32\drivers\acpi.sys, state: Running, startup: Boot
- Name: ADI UAA Function Driver for High Definition Audio Service, exe path: c:
\windows\system32\drivers\adihdaud.sys, state: Running, startup: Manual
[...]
When you execute the script, the drivers selected will be stopped. Note that some drivers won't allow themselves to be stopped.
09) Critical files
This section contains information about files that are critical to proper function of the operating system.
129
Example:
09) Critical files:
* File: win.ini
- [fonts]
- [extensions]
- [files]
- MAPI=1
[...]
* File: system.ini
- [386Enh]
- woafont=dosapp.fon
- EGA80WOA.FON=EGA80WOA.FON
[...]
* File: hosts
- 127.0.0.1 localhost
- ::1 localhost
[...]
The selected items will either be deleted or reset to their original values.
10) Scheduled tasks
This section contains information about scheduled tasks.
Example:
10) Scheduled tasks
- c:\windows\syswow64\macromed\flash\flashplayerupdateservice.exe
- c:\users\admin\appdata\local\google\update\googleupdate.exe
- c:\users\admin\appdata\local\google\update\googleupdate.exe
- c:\windows\syswow64\macromed\flash\flashplayerupdateservice.exe
- c:\users\admin\appdata\local\google\update\googleupdate.exe /c
- c:
\users\admin\appdata\local\google\update\googleupdate.exe /ua /installsource
- %windir%\system32\appidpolicyconverter.exe
- %windir%\system32\appidcertstorecheck.exe
- aitagent
[...]
5.5.4.3 Executing Service scripts
Mark all desired items, then save and close the script. Run the edited script directly from the ESET SysInspector main window by selecting the Run Service Script option from the File menu. When you open a script, the program will prompt you with the following message: Are you sure you want to run the service script “%Scriptname%”?
After you confirm your selection, another warning may appear, informing you that the service script you are trying to run has not been signed. Click Run to start the script.
A dialog window will confirm that the script was successfully executed.
If the script could only be partially processed, a dialog window with the following message will appear: The service script was run partially. Do you want to view the error report?
Select Yes to view a complex error report listing the operations that were not executed.
If the script was not recognized, a dialog window with the following message will appear: The selected service script is not signed. Running unsigned and unknown scripts may seriously harm your computer data. Are you sure you want to run the script and carry out the actions? This may be caused by inconsistencies within the script (damaged heading, corrupted section title, empty line missing between sections etc.). You can either reopen the script file and correct the errors within the script or create a new service script.
130
5.5.5 FAQ
Does ESET SysInspector require Administrator privileges to run ?
While ESET SysInspector does not require Administrator privileges to run, some of the information it collects can only be accessed from an Administrator account. Running it as a Standard User or a Restricted User will result in it collecting less information about your operating environment.
Does ESET SysInspector create a log file ?
ESET SysInspector can create a log file of your computer's configuration. To save one, click File > Save Log in the main program window. Logs are saved in XML format. By default, files are saved to the %USERPROFILE%\My Documents\ directory, with a file naming convention of "SysInpsector-%COMPUTERNAME%-YYMMDD-HHMM.XML". You may change the location and name of the log file to something else before saving if you prefer.
How do I view the ESET SysInspector log file ?
To view a log file created by ESET SysInspector, run the program and click File > Open Log in the main program window. You can also drag and drop log files onto the ESET SysInspector application. If you need to frequently view
ESET SysInspector log files, we recommend creating a shortcut to the SYSINSPECTOR.EXE file on your Desktop; you can then drag and drop log files onto it for viewing. For security reasons Windows Vista/7 may not allow drag and drop between windows that have different security permissions.
Is a specification available for the log file format? What about an SDK ?
At the current time, neither a specification for the log file or an SDK are available since the program is still in development. After the program has been released, we may provide these based on customer feedback and demand.
How does ESET SysInspector evaluate the risk posed by a particular object ?
In most cases, ESET SysInspector assigns risk levels to objects (files, processes, registry keys and so forth) using a series of heuristic rules that examine the characteristics of each object and then weight the potential for malicious activity. Based on these heuristics, objects are assigned a risk level from 1 - Fine (green) to 9 - Risky (red) . In the left navigation pane, sections are colored based on the highest risk level of an object inside them.
Does a risk level of "6 - Unknown (red)" mean an object is dangerous ?
ESET SysInspector's assessments do not guarantee that an object is malicious – that determination should be made by a security expert. What ESET SysInspector is designed for is to provide a quick assessment for security experts so that they know what objects on a system they may want to further examine for unusual behavior.
Why does ESET SysInspector connect to the Internet when run ?
Like many applications, ESET SysInspector is signed with a digital signature "certificate" to help ensure the software was published by ESET and has not been altered. In order to verify the certificate, the operating system contacts a certificate authority to verify the identity of the software publisher. This is normal behavior for all digitally-signed programs under Microsoft Windows.
What is Anti-Stealth technology ?
Anti-Stealth technology provides effective rootkit detection.
If the system is attacked by malicious code that behaves as a rootkit, the user may be exposed to data loss or theft.
Without a special anti-rootkit tool, it is almost impossible to detect rootkits.
Why are there sometimes files marked as "Signed by MS", having a different "Company Name" entry at the same time ?
When trying to identify the digital signature of an executable, ESET SysInspector first checks for a digital signature embedded in the file. If a digital signature is found, the file will be validated using that information. If a digital
131
signature is not found, the ESI starts looking for the corresponding CAT file (Security Catalog - %systemroot%
\system32\catroot ) that contains information about the executable file processed. If the relevant CAT file is found, the digital signature of that CAT file will be applied in the validation process of the executable.
This is why there are sometimes files marked as "Signed by MS", but having a different "CompanyName" entry.
Example:
Windows 2000 includes the HyperTerminal application located in C:\Program Files\Windows NT . The main application executable file is not digitally signed, but ESET SysInspector marks it as a file signed by Microsoft. The reason for this is a reference in C:\WINNT\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\sp4.cat
pointing to C:\Program Files\Windows NT\hypertrm.exe
(the main executable of the HyperTerminal application) and sp4.cat
is digitally signed by Microsoft.
5.6 Command Line
ESET Internet Security's antivirus module can be launched via the command line – manually (with the “ecls” command) or with a batch (“bat”) file. ESET Command-line scanner usage: ecls [OPTIONS..] FILES..
The following parameters and switches can be used while running the on-demand scanner from the command line:
Options
/base-dir=FOLDER
/quar-dir=FOLDER
/exclude=MASK
/subdir
/no-subdir
/max-subdir-level=LEVEL
/symlink
/no-symlink
/ads
/no-ads
/log-file=FILE
/log-rewrite
/log-console
/no-log-console
/log-all
/no-log-all
/aind
/auto
Scanner options
/files
/no-files
/memory
/boots
/no-boots
/arch
/no-arch
/max-obj-size=SIZE
/max-arch-level=LEVEL
/scan-timeout=LIMIT
/max-arch-size=SIZE
/max-sfx-size=SIZE load modules from FOLDER quarantine FOLDER exclude files matching MASK from scanning scan subfolders (default) do not scan subfolders maximum sub-level of folders within folders to scan follow symbolic links (default) skip symbolic links scan ADS (default) do not scan ADS log output to FILE overwrite output file (default – append) log output to console (default) do not log output to console also log clean files do not log clean files (default) show activity indicator scan and automatically clean all local disks scan files (default) do not scan files scan memory scan boot sectors do not scan boot sectors (default) scan archives (default) do not scan archives only scan files smaller than SIZE megabytes (default 0 = unlimited) maximum sub-level of archives within archives (nested archives) to scan scan archives for LIMIT seconds at maximum only scan the files in an archive if they are smaller than SIZE (default 0 = unlimited) only scan the files in a self-extracting archive if they are smaller than SIZE megabytes (default 0 = unlimited)
132
/no-mail
/mailbox
/no-mailbox
/sfx
/no-sfx
/rtp
/no-rtp
/unsafe
/no-unsafe
/unwanted
/no-unwanted
/suspicious
/no-suspicious
/pattern scan email files (default) do not scan email files scan mailboxes (default) do not scan mailboxes scan self-extracting archives (default) do not scan self-extracting archives scan runtime packers (default) do not scan runtime packers scan for potentially unsafe applications do not scan for potentially unsafe applications (default) scan for potentially unwanted applications do not scan for potentially unwanted applications (default) scan for suspicious applications (default) do not scan for suspicious applications use signatures (default)
/no-pattern
/heur
/no-heur
/adv-heur do not use signatures enable heuristics (default) disable heuristics enable Advanced heuristics (default)
/no-adv-heur
/ext=EXTENSIONS disable Advanced heuristics scan only EXTENSIONS delimited by colon
/ext-exclude=EXTENSIONS exclude EXTENSIONS delimited by colon from scanning
/clean-mode=MODE use cleaning MODE for infected objects
/quarantine
·
·
The following options are available:
· none – No automatic cleaning will occur.
standard strict
(default) – ecls.exe will attempt to automatically clean or delete infected files.
– ecls.exe will attempt to automatically clean or delete infected files without user
· intervention (you will not be prompted before files are deleted).
rigorous – ecls.exe will delete files without attempting to clean regardless of what the file is.
delete – ecls.exe will delete files without attempting to clean, but will refrain from
· deleting sensitive files such as Windows system files.
copy infected files (if cleaned) to Quarantine
(supplements the action carried out while cleaning) do not copy infected files to Quarantine /no-quarantine
General options
/help
/version
/preserve-time show help and quit show version information and quit preserve last access timestamp
Exit codes
0
1
10
50
100 no threat found threat found and cleaned some files could not be scanned (may be threats) threat found error
NOTE
Exit codes greater than 100 mean that the file was not scanned and thus can be infected.
133
6. Glossary
6.1 Types of infiltration
An Infiltration is a piece of malicious software trying to enter and/or damage a user’s computer.
6.1.1 Viruses
A computer virus is a piece of malicious code that is pre-pended or appended to existing files on your computer.
Viruses are named after biological viruses because they use similar techniques to spread from one computer to another. As for the term “virus”, it is often used incorrectly to mean any type of a threat. This usage is gradually being overcome and replaced with a more accurate term “malware” (malicious software).
Computer viruses mainly attack executable files and documents. In short, this is how a computer virus works: after execution of an infected file, the malicious code is called and executed prior to the execution of the original application. A virus can infect any files that the current user has write permissions for.
Computer viruses can range in purpose and severity. Some of them are extremely dangerous because of their ability to purposely delete files from a hard drive. On the other hand, some viruses do not cause any damage – they only serve to annoy the user and demonstrate the technical skills of their authors.
If your computer is infected with a virus and cleaning is not possible, submit it to the ESET Research Lab for perusal.
In certain cases infected files can be modified to such an extent that cleaning is not possible and the files must be replaced with a clean copy.
6.1.2 Worms
A computer worm is a program containing malicious code that attacks host computers and spreads via network. The basic difference between a virus and a worm is that worms have the ability to propagate by themselves; they are not dependant on host files (or boot sectors). Worms spread to email addresses in your contact list or exploit security vulnerabilities in network applications.
Worms are therefore much more viable than computer viruses. Due to the wide availability of the Internet, they can spread across the globe within hours or even minutes after their release. This ability to replicate independently and rapidly makes them more dangerous than other types of malware.
A worm activated in a system can cause a number of inconveniences: It can delete files, degrade system performance, or even deactivate programs. The nature of a computer worm qualifies it as a “means of transport“ for other types of infiltrations.
If your computer is infected with a worm, we recommend you delete the infected files because they likely contain malicious code.
6.1.3 Trojans
Historically, computer Trojans (Trojan horses) have been defined as a class of threats which attempt to present themselves as useful programs and thus trick users into running them.
Since Trojans are a very broad category, it is often divided into several subcategories:
·
·
·
·
·
Downloader
– Malicious programs with the ability to download other threats from the Internet.
Dropper
– Malicious programs with the ability to drop other types of malware onto compromised computers.
Backdoor
– Malicious programs which communicate with remote attackers, allowing them to gain access to the computer and take control over it.
Keylogger
– (keystroke logger) – A program which records each keystroke that a user types and sends the information to remote attackers.
Dialer
– Malicious programs designed to connect via premium-rate numbers instead of the user's Internet service provider. It is almost impossible for a user to notice that a new connection was created. Dialers can only cause damage to users with dial-up modems, which are no longer regularly used.
134
If a file on your computer is detected as a Trojan, it is advisable to delete it, since it most likely contains nothing but malicious code.
6.1.4 Rootkits
Rootkits are malicious programs that grant Internet attackers unlimited access to a system, while concealing their presence. Rootkits, after accessing a system (usually exploiting a system vulnerability), use functions in the operating system to avoid detection by antivirus software: they conceal processes, files and Windows registry data.
For this reason, it is almost impossible to detect them using ordinary testing techniques.
There are two levels of detection to prevent rootkits:
1. When they try to access a system: They are still not present, and are therefore inactive. Most antivirus systems are able to eliminate rootkits at this level (assuming that they actually detect such files as being infected).
2. When they are hidden from the usual testing: ESET Internet Security users have the advantage of Anti-Stealth technology, which is also able to detect and eliminate active rootkits.
6.1.5 Adware
Adware is a short for advertising-supported software. Programs displaying advertising material fall under this category. Adware applications often automatically open a new pop-up window containing advertisements in an
Internet browser, or change the browser’s home page. Adware is frequently bundled with freeware programs, allowing their creators to cover development costs of their (usually useful) applications.
Adware itself is not dangerous – users will only be bothered with advertisements. Its danger lies in the fact that adware may also perform tracking functions (as spyware does).
If you decide to use a freeware product, please pay particular attention to the installation program. The installer will most likely notify you of the installation of an extra adware program. Often you will be allowed to cancel it and install the program without adware.
Some programs will not install without adware, or their functionality will be limited. This means that adware may often access the system in a “legal” way, because users have agreed to it. In this case, it is better to be safe than sorry.If there is a file detected as adware on your computer, it is advisable to delete it, since there is a high probability that it contains malicious code.
6.1.6 Spyware
This category covers all applications which send private information without user consent/awareness. Spyware uses tracking functions to send various statistical data such as a list of visited websites, email addresses from the user‘s contact list, or a list of recorded keystrokes.
The authors of spyware claim that these techniques aim to find out more about users’ needs and interests and allow better-targeted advertisement. The problem is that there is no clear distinction between useful and malicious applications and no one can be sure that the retrieved information will not be misused. The data obtained by spyware applications may contain security codes, PINs, bank account numbers, etc. Spyware is often bundled with free versions of a program by its author in order to generate revenue or to offer an incentive for purchasing the software. Often, users are informed of the presence of spyware during a program‘s installation to give them an incentive to upgrade to a paid version without it.
Examples of well-known freeware products which come bundled with spyware are client applications of P2P (peerto-peer) networks. Spyfalcon or Spy Sheriff (and many more) belong to a specific spyware subcategory – they appear to be antispyware programs, but in fact they are spyware programs themselves.
If a file is detected as spyware on your computer, it is advisable to delete it, since there is a high probability that it contains malicious code.
135
6.1.7 Packers
Packer is a runtime self-extracting executable that rolls up several kinds of malware into a single package.
The most common packers are UPX, PE_Compact, PKLite and ASPack. The same malware may be detected differently when compressed using a different packer. Packers also have the ability to make their "signatures" mutate over time, making malware more difficult to detect and remove.
6.1.8 Potentially unsafe applications
There are many legitimate programs whose function is to simplify the administration of networked computers.
However, in the wrong hands, they may be misused for malicious purposes. ESET Internet Security provides the option to detect such threats.
Potentially unsafe applications is the classification used for commercial, legitimate software. This classification includes programs such as remote access tools, password-cracking applications, and keyloggers (a program that records each keystroke a user types).
If you find that there is a potentially unsafe application present and running on your computer (and you did not install it), please consult your network administrator or remove the application.
6.1.9 Potentially unwanted applications
Grayware (or PUA - a Potentially Unwanted Application) is a broad category of software, whose intent is not as unequivocally malicious as with other types of malware, such as viruses or trojan horses. It may however install additional unwanted software, change the behavior of the digital device, or perform activities not approved or expected by the user.
Categories that may be considered grayware include: advertising display software, download wrappers, various browser toolbars, software with misleading behavior, bundleware, trackware, registry cleaners (Windows operating systems only) or any other borderline software, or software that uses illicit or at least unethical business practices
(despite appearing legitimate) and might be deemed undesirable by an end user who became aware of what the software would do if allowed to install.
A Potentially Unsafe Application is one that is in itself legitimate (possibly commercial) software but which might be misused by an attacker. Detection of these types of application can be enabled or disabled by users of ESET software.
There are some situations where a user may feel that the benefits of a potentially unwanted application outweigh the risks. For this reason, ESET assigns such applications a lower-risk category compared to other types of malicious software, such as trojan horses or worms.
Warning - Potentially unwanted application found
When a potentially unwanted application is detected, you can decide which action to take:
1.
Clean/Disconnect : This option ends the action and prevents the PUA from entering your system.
You will see the Disconnect option for PUA notifications during download from a website and the Clean option for notifications for a file on disk.
2.
Ignore : This option allows a PUA to enter your system.
3.
Exclude from detection : To allow the detected file that is already on the computer to run in the future without interruption, click Advanced options , select the check box next to Exclude from detection and click
Ignore .
4.
Exclude signature from detection : To allow all files identified by a specific detection name (signature) to run on your computer in the future without interruption (from existing files or web download), click Advanced options , select the check box next to Exclude signature from detection and click Ignore . If additional detection windows with an identical detection name are displayed immediately afterward, click Ignore to close them (any additional windows are related to a detection that occured before you excluded signature from detection).
136
Potentially unwanted applications - Settings
While installing your ESET product, you can decide whether to enable detection of potentially unwanted applications, as shown below:
Warning
Potentially unwanted applications may install adware, toolbars, or contain other unwanted and unsafe program features.
137
These settings can be modified in your program settings at any time. To enable or disable the detection of
Potentially unwanted, unsafe or suspicious applications, follow these instructions:
1. Open your ESET product. How do I open my ESET product?
2. Press the F5 key to access Advanced setup .
3. Click Detection engine (in earlier versions also known as Antivirus or Computer ) and enable or disable options Enable detection of potentially unwanted applications , Enable detection of potentially unsafe applications and Enable detection of suspicious applications according to your preferences. Confirm by clicking OK .
Potentially unwanted applications - Software wrappers
A software wrapper is a special type of application modification that is used by some file-hosting websites. It is a third-party tool that installs the program you intended to download but adds additional software, such as toolbars or adware. The additional software may also make changes to your web browser’s home page and search settings.
Also, file-hosting websites often do not notify the software vendor or download recipient that modifications have been made, and often hide options to opt out. For these reasons, ESET classifies software wrappers as a type of potentially unwanted application to allow users to accept the download or not.
Potentially unwanted applications - Registry cleaners
Registry cleaners are programs that may suggest that the Windows registry database requires regular maintenance or cleaning. Using a registry cleaner might introduce some risks to your computer system. Additionally, some registry cleaners make unqualified, unverifiable or otherwise unsupportable claims about their benefits and/or generate misleading reports about a computer system based on the results of a "free scan". These misleading claims and reports seek to persuade you to purchase a full version or subscription, usually without allowing you to evaluate the registry cleaner before payment. For these reasons, ESET classifies such programs as PUA and provides you the option to allow or to block them.
Potentially unwanted content
If PUA detection is enabled in your ESET product, websites that have a reputation for promoting PUAs or that have a reputation for misleading users into performing actions that might have negative implications on their system or browsing experience will be blocked as potentially unwanted content. If you receive a notification that a website
138
you are attempting to visit is categorized as potentially unwanted content, you can click Go Back to navigate away from the blocked web page or click Ignore and continue to allow the site to load.
Please see this ESET Knowledgebase article for an updated version of this help page.
6.1.10 Botnet
A bot, or a web robot is an automated malware program that scans blocks of network addresses and infects vulnerable computers. This allow hackers to take control of many computers at the same time and turn them into bots (also known as a zombie). Hackers typically use bots to infect large numbers of computers, which form a network or a botnet. Once the botnet is in your computer, it can be used in distributed denial of service (DDoS) attacks, proxy and also can be used to perform automated tasks over the Internet, without you knowing it (for example sending spam, viruses or stealing personal and private information such as bank credentials or credit card numbers).
6.2 Types of remote attacks
There are many special techniques which allow attackers to compromise remote systems. These are divided into several categories.
6.2.1 DoS attacks
DoS, or Denial of Service , is an attempt to make a computer or network unavailable for its intended users. The communication between afflicted users is obstructed and can no longer continue in a functional way. Computers exposed to DoS attacks usually need to be restarted in order to work properly.
In most cases, the targets are web servers and the aim is to make them unavailable to users for a certain period of time.
6.2.2 DNS Poisoning
Using DNS (Domain Name Server) poisoning, hackers can trick the DNS server of any computer into believing that the fake data they supplied is legitimate and authentic. The fake information is cached for a certain period of time, allowing attackers to rewrite DNS replies of IP addresses. As a result, users trying to access Internet websites will download computer viruses or worms instead of their original content.
6.2.3 Worm attacks
A computer worm is a program containing malicious code that attacks host computers and spreads via a network.
Network worms exploit security vulnerabilities in various applications. Due to the availability of the Internet, they can spread all over the world within a few hours of their release.
Most worm attacks (Sasser, SqlSlammer) can be avoided by using default security settings in the firewall, or by blocking unprotected and unused ports. Also, it is essential that your operating system is updated with the most recent security patches.
6.2.4 Port scanning
Port scanning is used to determine which computer ports are open on a network host. A port scanner is software designed to find such ports.
A computer port is a virtual point which handles incoming and outgoing data – this is crucial from a security point of view. In a large network, the information gathered by port scanners may help to identify potential vulnerabilities.
Such use is legitimate.
Still, port scanning is often used by hackers attempting to compromise security. Their first step is to send packets to each port. Depending on the response type, it is possible to determine which ports are in use. The scanning itself causes no damage, but be aware that this activity can reveal potential vulnerabilities and allow attackers to take control of remote computers.
139
Network administrators are advised to block all unused ports and protect those that are in use from unauthorized access.
6.2.5 TCP desynchronization
TCP desynchronization is a technique used in TCP Hijacking attacks. It is triggered by a process in which the sequential number in incoming packets differs from the expected sequential number. Packets with an unexpected sequential number are dismissed (or saved in the buffer storage, if they are present in the current communication window).
In desynchronization, both communication endpoints dismiss received packets, at which point remote attackers are able to infiltrate and supply packets with a correct sequential number. The attackers can even manipulate or modify communication.
TCP Hijacking attacks aim to interrupt server-client, or peer-to-peer communications. Many attacks can be avoided by using authentication for each TCP segment. It is also advised to use the recommended configurations for your network devices.
6.2.6 SMB Relay
SMB Relay and SMB Relay 2 are special programs that are capable of carrying out attacks against remote computers.
The programs take advantage of the Server Message Block file sharing protocol, which is layered onto NetBIOS. A user sharing any folder or directory within the LAN most likely uses this file sharing protocol.
Within local network communication, password hashes are exchanged.
SMB Relay receives a connection on UDP port 139 and 445, relays the packets exchanged by the client and server, and modifies them. After connecting and authenticating, the client is disconnected. SMB Relay creates a new virtual
IP address. The new address can be accessed using the command “net use \\192.168.1.1“. The address can then be used by any of the Windows networking functions. SMB Relay relays SMB protocol communication except for negotiation and authentication. Remote attackers can use the IP address, as long as the client computer is connected.
SMB Relay 2 works on the same principle as SMB Relay, except it uses NetBIOS names rather than IP addresses. Both can carry out “man-in-the-middle” attacks. These attacks allow remote attackers to read, insert and modify messages exchanged between two communication endpoints without being noticed. Computers exposed to such attacks often stop responding or restart unexpectedly.
To avoid attacks, we recommend that you use authentication passwords or keys.
6.2.7 ICMP attacks
The ICMP (Internet Control Message Protocol) is a popular and widely-used Internet protocol. It is used primarily by networked computers to send various error messages.
Remote attackers attempt to exploit the weaknesses of the ICMP protocol. The ICMP protocol is designed for oneway communication requiring no authentication. This enables remote attackers to trigger so-called DoS (Denial of
Service) attacks, or attacks which give unauthorized individuals access to incoming and outgoing packets.
Typical examples of an ICMP attack are ping flood, ICMP_ECHO flood and smurf attacks. Computers exposed to the
ICMP attack are significantly slower (this applies to all applications using the Internet) and have problems connecting to the Internet.
140
6.3 ESET Technology
6.3.1 Exploit Blocker
Exploit Blocker is designed to fortify commonly exploited application types such as web browsers, PDF readers, email clients and MS Office components. It works by monitoring the behavior of processes for suspicious activity that might indicate an exploit.
When Exploit Blocker identifies a suspicious process, it can stop the process immediately and record data about the threat, which is then sent to the ThreatSense cloud system. This data is processed by the ESET Research Lab and used to better protect all users from unknown threats and zero-day attacks (newly released malware for which there is no pre-configured remedy).
6.3.2 Advanced Memory Scanner
Advanced Memory Scanner works in combination with Exploit Blocker to strengthen protection against malware that has been designed to evade detection by antimalware products through the use of obfuscation and/or encryption. In cases where ordinary emulation or heuristics might not detect a threat, the Advanced memory
Scanner is able to identify suspicious behavior and scan threats when they reveal themselves in system memory.
This solution is effective against even heavily obfuscated malware.
Unlike Exploit Blocker, Advanced Memory Scanner is a post-execution method, which means that there is a risk that some malicious activity could have been performed prior to its detecting a threat; however in the case that other detection techniques have failed, it offers an additional layer of security.
6.3.3 Network Attack Protection
Network Attack Protection is an extension of the Firewall that improves the detection of exploits for known vulnerabilities at the network level. By implementing detections for common exploits in widely used protocols such as SMB, RPC and RDP, it constitutes another important layer of protection against spreading malware, networkconducted attacks and exploitations of vulnerabilities for which a patch has not yet been released or deployed.
6.3.4 ESET LiveGrid®
Built on ThreatSense.Net® advanced early warning system, ESET LiveGrid® utilizes data that ESET users have submitted worldwide and sends it to the ESET Research Lab. By providing suspicious samples and metadata from the wild, ESET LiveGrid® enables us to react immediately to needs of our customers and keep ESET responsive to the latest threats. ESET malware researchers use the information to build an accurate snapshot of the nature and scope of global threats, which helps us focus on the right targets. ESET LiveGrid® data plays an important role in setting priorities in our automated processing.
Additionally, it implements a reputation system that helps to improve the overall efficiency of our anti-malware solutions. When an executable file or archive is being inspected on a user’s system, its hash tag is first compared against a database of white- and blacklisted items. If it is found on the whitelist, the inspected file is considered clean and also flagged to be excluded from future scans. If it is on the blacklist, appropriate actions are taken based on the nature of the threat. If no match is found, the file is scanned thoroughly. Based on the results of this scan, files are categorized as threats or non-threats. This approach has a significant positive impact on scanning performance.
This reputation system allows for effective detection of malware samples even before their signatures are delivered to user’s computer via updated virus database (which happens several times a day).
141
6.3.5 Botnet protection
Botnet protection discover malware through analyzing its network communication protocols. Botnet malware is changing frequently in contrast to network protocols, which haven't changed in the last years. This new technology helps ESET defeat malware which tries to avoid detection and try to connect your computer to botnet network.
6.3.6 Java Exploit Blocker
Java Exploit Blocker is an extension to existing Exploit Blocker protection. It monitors Java and looking for exploitlike behavior. Blocked samples can be reported to malware analysts, so they can create signatures to block them on different layers (URL blocking, file download, etc.).
6.3.7 Banking & Payment protection
Banking & Payment protection is an additional layer of protection designed to protect your financial data during online transactions.
ESET Internet Security contains a built-in list of predefined websites that will trigger a protected browser to open.
You can add a website or edit the list of websites in the product configuration.
For more details about this feature, read the following ESET Knowledgebase article:
How do I use ESET Banking and Payment protection?
In most cases, Banking & Payment protection is launched in your default browser after you visit a known banking website.
We recommend that you click Open secured browser when prompted to use Banking & Payment protection.
If you decide you no longer want to use the secured browser for a site you've already saved, open Setup > Security
Tools > Banking & Payment protection where you can remove the site from the list of urls that trigger the secured browser.
142
The use of HTTPS encrypted communication is necessary to perform protected browsing. To use secure browsing, your internet browser should satisfy the minimum requirements listed below:
·
Mozilla Firefox 24
·
Internet Explorer 8
·
Google Chrome 30
We recommend that you close the secured browser after finishing online transactions or payments.
6.3.8 Script-Based Attacks Protection
Script-Based Attacks Protection consists of protection against javascript in web browsers and Antimalware Scan
Interface (AMSI) protection against scripts in Powershell.
WARNING
HIPS must be enabled for this feature to work.
Script-Based Attacks Protection supports the following web browsers:
·
Mozilla Firefox
·
Google Chrome
·
Internet Explorer
·
Microsoft Edge
NOTE
The minimum supported versions of web browsers may vary because the file signature of browsers change often. The latest version of web browser is always supported.
6.3.9 Ransomware Shield
Ransomware is a type of malware that blocks users from accessing their system by locking the system's screen or by encrypting files. Ransomware Shield monitors the behavior of applications and processes that try to modify your personal data. If an application's behavior is considered malicious or reputation-based scanning shows an
IMPORTANT
ESET LiveGrid® must be enabled for Ransomware Shield to function properly.
6.3.10 UEFI Scanner
Unified Extensible Firmware Interface (UEFI) Scanner is part of the Host-based Intrusion Prevention System (HIPS) that protects UEFI on your computer. UEFI is a firmware which loads into memory at the beginning of the boot process. The code is on a flash memory chip soldered onto the mainboard. By infecting it, attackers can deploy malware that survives system reinstallations and reboots. The malware can also easily remain unnoticed by antimalware solutions as most of them are not scanning this layer.
UEFI Scanner is enabled automatically. You can also start a computer scan manually from the main program window by clicking Computer scan > Advanced Scans > Custom Scan and selecting the Boot sectors/UEFI target. For more
information about computer scans, see the section Computer scan .
If your computer has already been infected by UEFI malware, read the following ESET Knowledgebase article:
My computer is infected with UEFI malware, what should I do?
143
6.4 Email
Email, or electronic mail, is a modern form of communication with many advantages. It is flexible, fast and direct, and played a crucial role in the proliferation of the Internet in the early 1990‘s.
Unfortunately, with a high level of anonymity, email and the Internet leave room for illegal activities such as spamming. Spam includes unsolicited advertisements, hoaxes and proliferation of malicious software – malware.
The inconvenience and danger to you is increased by the fact that the cost of sending spam is minimal, and authors of spam have many tools to acquire new email addresses. In addition, the volume and variety of spam makes it very difficult to regulate. The longer you use your email address, the more likely it will end up in a spam engine database. Some hints for prevention:
·
If possible, don’t publish your email address on the Internet
·
Only give your email address to trusted individuals
·
If possible, don’t use common aliases – with more complicated aliases, the probability of tracking is lower
·
Don’t reply to spam that has already arrived in your inbox
·
Be careful when filling out Internet forms – be especially cautious of options such as “Yes, I want to receive information”.
·
Use “specialized” email addresses – e.g., one for business, one for communication with your friends, etc.
·
From time to time, change your email address
·
Use an Antispam solution
6.4.1 Advertisements
Internet advertising is one of the most rapidly growing forms of advertising. Its main marketing advantages are minimal costs and a high level of directness; what’s more, messages are delivered almost immediately. Many companies use email marketing tools to effectively communicate with current and prospective customers.
This type of advertising is legitimate, since you may be interested in receiving commercial information about some products. But many companies send unsolicited bulk commercial messages. In such cases, email advertising crosses the line and becomes spam.
The amount of unsolicited email has become a problem and it shows no signs of slowing. Authors of unsolicited email often attempt to disguise spam as legitimate messages.
6.4.2 Hoaxes
A hoax is misinformation which is spread across the Internet. Hoaxes are usually sent via email or communication tools like ICQ and Skype. The message itself is often a joke or Urban Legend.
Computer Virus hoaxes try to generate fear, uncertainty and doubt (FUD) in the recipients, bringing them to believe that there is an “undetectable virus“ deleting files and retrieving passwords, or performing some other harmful activity on their system.
Some hoaxes work by asking recipients to forward messages to their contacts, perpetuating the hoax. There are mobile phone hoaxes, pleas for help, people offering to send you money from abroad, etc. It is often impossible to determine the intent of the creator.
If you see a message prompting you to forward it to everyone you know, it may very well be a hoax. There are many websites on the Internet that can verify if an email is legitimate. Before forwarding, perform an Internet search on any message you suspect is a hoax.
144
6.4.3 Phishing
The term phishing defines a criminal activity which uses techniques of social engineering (manipulating users in order to obtain confidential information). Its aim is to gain access to sensitive data such as bank account numbers,
PIN codes, etc.
Access is usually achieved by sending email masquerading as a trustworthy person or business (e.g., financial institution, insurance company). The email can look very genuine, and will contain graphics and content which may have originally come from the source it is impersonating. You will be asked to enter, under various pretenses (data verification, financial operations), some of your personal data – bank account numbers or usernames and passwords. All such data, if submitted, can easily be stolen and misused.
Banks, insurance companies, and other legitimate companies will never request usernames and passwords in an unsolicited email.
6.4.4 Recognizing spam scams
Generally, there are a few indicators which can help you identify spam (unsolicited emails) in your mailbox. If a message fulfills at least some of the following criteria, it is most likely a spam message.
·
Sender address does not belong to someone on your contact list.
·
You are offered a large sum of money, but you have to provide a small sum first.
·
You are asked to enter, under various pretenses (data verification, Financial operations), some of your personal data – bank account numbers, usernames and passwords, etc.
·
It is written in a foreign language.
·
You are asked to buy a product you are not interested in. If you decide to purchase anyway, please verify that the message sender is a reliable vendor (consult the original product manufacturer).
·
Some of the words are misspelled in an attempt to trick your spam filter. For example “vaigra” instead of
“viagra”, etc.
6.4.4.1 Rules
In the context of Antispam solutions and email clients, rules are tools for manipulating email functions. They consist of two logical parts:
1. Condition (e.g., an incoming message from a certain address)
2. Action (e.g., deletion of the message, moving it to a specified folder)
The number and combination of rules varies with the Antispam solution. These rules serve as measures against spam (unsolicited email). Typical examples:
·
1. Condition: An incoming email message contains some of the words typically seen in spam messages
2. Action: Delete the message
·
1. Condition: An incoming email message contains an attachment with an .exe extension
2. Action: Delete the attachment and deliver the message to the mailbox
·
1. Condition: An incoming email message arrives from your employer
2. Action: Move the message to the “Work” folder
We recommend that you use a combination of rules in Antispam programs in order to facilitate administration and to more effectively filter spam.
145
6.4.4.2 Whitelist
In general, a whitelist is a list of items or persons who are accepted, or have been granted permission. The term
“email whitelist“ defines a list of contacts from whom the user wishes to receive messages. Such whitelists are based on keywords searched for in email addresses, domain names, or IP addresses.
If a whitelist works in “exclusivity mode“, then messages from any other address, domain, or IP address will not be received. If a whitelist is not exclusive, such messages will not be deleted, but filtered in some other way.
so than blacklists. We recommend that you use both the Whitelist and Blacklist to filter spam more effectively.
6.4.4.3 Blacklist
Generally, a blacklist is a list of unaccepted or forbidden items or persons. In the virtual world, it is a technique enabling acceptance of messages from all users not present on such a list.
There are two types of blacklist: Those created by users within their Antispam application, and professional, regularly updated blacklists which are created by specialized institutions and can be found on the Internet.
It is essential to use blacklists to successfully block spam, but they are difficult to maintain, since new items to be blocked appear every day. We recommended you use both a whitelist and a blacklist to most effectively filter spam.
6.4.4.4 Exception list
The Exception list usually contains email addresses that may be spoofed and used for sending spam. Email messages received from addresses listed in the Exception list will always be scanned for spam. By default, the Exception list contains all email addresses from existing email client accounts.
6.4.4.5 Server-side control
Server-side control is a technique for identifying mass spam based on the number of received messages and the reactions of users. Each message leaves a unique digital “footprint” based on the content of the message. The unique ID number tells nothing about the content of the email. Two identical messages will have identical footprints, while different messages will have different footprints.
If a message is marked as spam, its footprint is sent to the server. If the server receives more identical footprints
(corresponding to a certain spam message), the footprint is stored in the spam footprints database. When scanning incoming messages, the program sends the footprints of the messages to the server. The server returns information on which footprints correspond to messages already marked by users as spam.
146
7. Common Questions
This chapter covers some of the most frequently asked questions and problems encountered. Click the topic title to find out how to solve your problem:
How to update ESET Internet Security
How to remove a virus from my PC
How to allow communication for a certain application
How to enable Parental control for an account
How to create a new task in Scheduler
How to schedule a scan task (every 24 hours)
If your problem is not included in the help pages list above, try searching the ESET Internet Security help pages.
If you cannot find the solution to your problem/question in the help pages, you can visit our regularly updated online ESET Knowledgebase . Links to our most popular Knowledgebase articles are included below to help you resolve common issues:
I received an activation error while installing my ESET product. What does it mean?
Activate my ESET Windows home product using my Username, Password, or License Key
Uninstall or reinstall my ESET home product
I receive the message that my ESET installation ended prematurely
What do I need to do after renewing my license? (Home users)
What if I change my email address?
How to start Windows in Safe Mode or Safe Mode with networking
If necessary, you can contact our Customer Care with your questions or problems. The contact form can be found in the Help and Support tab of ESET Internet Security.
7.1 How to update the ESET Internet Security
Updating ESET Internet Security can be performed either manually or automatically. To trigger the update, click
Update in the main program window and then click Check for updates .
The default installation settings create an automatic update task which is performed on an hourly basis. If you need to change the interval, please navigate to Tools > Scheduler
(for more information on Scheduler, click here ).
7.2 How to remove a virus from my PC
If your computer is showing symptoms of malware infection, e.g. it is slower, often freezes, we recommend that you do the following:
1. In the main program window, click Computer scan .
2. Click Scan your computer to begin scanning your system.
3. After the scan has finished, review the log with the number of scanned, infected and cleaned files.
4. If you wish to only scan a certain part of your disk, click Custom scan and select targets to be scanned for viruses.
For additional information please see our regularly updated ESET Knowledgebase article .
147
7.3 How to allow communication for a certain application
If a new connection is detected in interactive mode and if there is no matching rule, you will be prompted to allow or deny the connection. If you want ESET Internet Security to perform the same action every time the application attempts to establish a connection, select the Remember action (create rule) check box.
You can create new Firewall rules for applications before they are detected by ESET Internet Security in the Firewall setup window, located under Network > Firewall > Rules and zones > Setup . For the Rules tab to be available in Zone and rule setup , the Firewall Filtering mode must be set to Interactive mode.
In the General tab, enter the name, direction and communication protocol for the rule. This window allows you to define the action to be taken when the rule is applied.
Enter the path to the application's executable and the local communication port in the Local tab. Click the Remote tab to enter the remote address and port (if applicable). The newly-created rule will be applied as soon as the application tries to communicate again.
7.4 How to enable Parental control for an account
To activate Parental control for a specific user account, follow the steps below:
1. By default Parental control is disabled in ESET Internet Security. There are two methods for activating Parental control: o Click in the Setup > Security tools > Parental control from the main program window and change the
Parental control state to enabled.
o Press F5 to access the Advanced Setup tree, navigate to Web and email > Parental Control and then engage the switch next to Integrate into system .
2. Click Setup > Security tools > Parental control from the main program window. Even though Enabled appears next to Parental control , you must configure Parental control for the desired account by clicking Protect child account or Parent account . In the next window select the birth date to determine the level of access and recommended age-appropriate web pages. Parental control will now be enabled for the specified user account. Click Blocked
148
content and settings...
under the account name to customize categories you want to allow or block in the
tab. To allow or block custom web pages that do not match a category, click the Exceptions tab.
7.5 How to create a new task in Scheduler
To create a new task in Tools > More tools > Scheduler , click Add or right-click and select Add...
from the context menu. Five types of scheduled tasks are available:
·
Run external application – Schedules the execution of an external application.
·
Log maintenance – Log files also contains leftovers from deleted records. This task optimizes records in log files on a regular basis to work effectively.
·
System startup file check – Checks files that are allowed to run at system startup or logon.
·
Create a computer status snapshot
– Creates an ESET SysInspector computer snapshot – gathers detailed
information about system components (for example, drivers, applications) and assesses the risk level of each component.
·
On-demand computer scan – Performs a computer scan of files and folders on your computer.
·
Update – Schedules an Update task by updating the modules.
Since Update is one of the most frequently used scheduled tasks, we will explain how to add a new update task below:
149
From the Scheduled task drop-down menu, select Update . Enter the name of the task into the Task name field and click Next . Select the frequency of the task. The following options are available: Once , Repeatedly , Daily , Weekly and Event triggered. Select Skip task when running on battery power to minimize system resources while a laptop is running on battery power. The task will be run on the specified date and time in Task execution fields. Next, define the action to take if the task cannot be performed or completed at the scheduled time. The following options are available:
·
At the next scheduled time
·
As soon as possible
·
Immediately, if time since last run exceeds a specified value (the interval can be defined using the Time since last run (hours) scroll box)
In the next step, a summary window with information about the current scheduled task is displayed. Click Finish when you are finished making changes.
A dialog window will appear, allowing you to select the profiles to be used for the scheduled task. Here you can set the primary and alternative profile. The alternative profile is used if the task cannot be completed using the primary profile. Confirm by clicking Finish and the new scheduled task will be added to the list of currently scheduled tasks.
7.6 How to schedule a weekly computer scan
To schedule a regular task, open the main program window and click Tools > More tools > Scheduler . Below is a short guide on how to schedule a task that will scan your local drives every 24 hours. See our Knowledgebase article for more detailed instructions.
To schedule a scan task:
1. Click Add in the main Scheduler screen.
2. Select On-demand computer scan from the drop-down menu.
3. Enter a name for the task and select Weekly for the task frequency.
4. Set the day and time the task will execute.
5. Select Run the task as soon as possible to perform the task later if the scheduled task does not run for any reason (for example, if the computer was turned off).
6. Review the summary of the scheduled task and click Finish .
7. From the Targets drop-down menu, select Local drives .
8. Click Finish to apply the task.
7.7 How to unlock Advanced setup
When you want to access protected Advanced setup, the window for entering the password is displayed. If you forget or lose your password, click the Restore password option below and enter the email address you used for license registration. ESET will send you an email with the verification code. Enter the verification code and then write and confirm the new password. The verification code is valid for 7 days.
You can also restore password via your my.eset.com account . Use this option, if the license is associated with your
ESET License Manager.
If you cannot remember your email address, click I don't know my email address and you will be redirected to the
ESET website to quickly contact our Customer Care department.
Generate code for Customer Care – This option will generate the code to be provided to Customer Care. Copy the code provided by Customer Care and click I have a verification code . Enter the verification code and then write and confirm the new password. The verification code is valid for 7 days.
For more information, read the ESET Knowledgebase article .
150
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project