- Computers & electronics
- Networking
- Routers
- Digisol
- DG-HR1070MSE (H/W Ver. A2)
- Quick Installation Guide
Digisol DG-BR5411QAC AC 1200 Gigabit Dual Band Wireless Broadband Router Quick Installation Guide
Add to my manuals
2 Pages
Digisol DG-BR5411QAC is a high-performance wireless router designed to provide fast, reliable, and secure internet connectivity for homes and small offices. With its powerful internal antennas, it offers wide coverage and eliminates dead zones, ensuring a stable connection for all your devices. The router supports the latest 802.11ac Wi-Fi standard, delivering blazing-fast speeds of up to 1200Mbps on the 5GHz band and 300Mbps on the 2.4GHz band, allowing you to enjoy seamless streaming, gaming, and downloading.
advertisement
DG-HR1070MSE Quick Installation Guide
Quick Installation Guide
DG-HR1070MSE
DIGISOL 4G MI-FI PORTABLE BROADBAND ROUTER
V2.0
2017-01-16
As our products undergo continuous development the specifications are subject to change without prior notice
Copyright
Copyright 2017 by Digisol Systems Ltd. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
Trademarks
DIGISOL
TM
is a trademark of Digisol Systems Ltd. All other trademarks are the property of the respective manufacturers.
Introduction
The DIGISOL™ DG-HR1070MSE HSPA+ Mobile Router lets you share a fast mobile Internet connection with multiple PCs and mobile devices wherever you go. It offers 4G/3G LTE/ HSPA+ compatibility for fast downlink and uplink data rates, so you get the high-speed upload and download speeds even when you’re on the go. Set up a personal mobile network anywhere, anytime allowing you and those around you to access the Internet, and share files.
DG-HR1070MSE Quick Installation Guide
Package Contents
The following items should be present in your package:
DG-HR1070MSE Quick Installation Guide
External Buttons
key Illustrate
• DG-HR1070MSE 4G Mi-Fi Broadband Router
• Lithium 2000mAh rechargeable battery
• Power Adapter (5V, 1A)
• Micro USB Cable
• Quick Installation Guide
Make sure that the package contains above items. If any of the listed items is damaged or missing, please contact your retailer immediately.
Power key
WPS
Reset
Long press over 5 seconds to power on and long press to power off
Press to active the WPS
The Reset button (Inside the bottom cover) if you forget
Administrator password press reset key.
System Requirements
• A compatible (U) SIM card with mobile data service.
• A computer with Windows®, Macintosh®, or Linux-based
operating systems.
• Internet Explorer 8, Firefox 12.0, Chrome 20.0, or Safari
4.0.
Hardware Overview
LED chart
Indicator Color Working Status
Power
LED
Signal
LED
WiFi LED
Amber Charging
Blue Battery High (100%-60%) or
Charge Completed
Green Battery Middle (60%-10%)
Red Blink: Battery too low nearly shutdown (10%)
Purple Blink: New SMS
Blue Solid: Register to LTE (not connecedt)
Blink: Connected to LTE network
Green Solid: Register to 3G (not connected)
Purple Solid: Register to 2G (not connected)
Blink: Connected to 2G network
Red
Blue
Blink: Connected to 3G network
Blink: No Service/Device Error
Solid: No Client
Blink: Client is active
Blink: WPS is active
Blink:
Turn on-
0.5s
Turn off-
0.5s
Blink:
Turn on-
0.2s
Turn off-
0.1s
DG-HR1070MSE Quick Installation Guide
Connect to your network
1. Ensure that your DG-HR1070MSE 4G Mobile Router is powered
OFF.
2. Remove the back cover and take out the battery. Slide your (U) SIM card into the slot provided, ensuring that the alignment is the same as indicated by the logo next to the slot. The gold contacts on the card should be facing downwards.
Caution: Always unplug and turn off the router before installing or removing the SIM card. Never insert or remove the SIM card while the router is in use.
3. Press and hold the power button at the side of the router.
a. The Power LED will light Blue or Green after Power on
and performs its initialization processes.
b. After a few moments, the Wireless LED will glow blue.
For more details please refer to “ LED Status ” explained earlier.
DG-HR1070MSE Quick Installation Guide
Web Based Configuration
To access the configuration, open a web browser (such as Internet
Explorer) and enter the IP address of the router, which is 192.168.2.1
by default.
Once you have reached the configuration utility through your web browser, you will need to log in. Enter admin as the username, and then enter the password. By default, the password is 1234.
Configure the Router
Connect via Wi-Fi:
To connect to the router using Wi-
Fi, open your operating system’s wireless networking utility and scan for available networks. By default, the network name (SSID) of DG-HR1070MSE will be “ DIGISOL ”
You will then be prompted to enter the network security key for your router. The unique security key for your router will be displayed on a sticker in the router’s battery bay. By default the security key is
“ 12345678 ”.
Click Login to continue.
Note: For detailed configuration of the router, please refer to the user manual.
DG-HR1070MSE Quick Installation Guide
This product comes with a Limited Lifetime Warranty. For further details about warranty policy and Product Registration, please visit support section of www.digisol.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement