Graphite
®
Edge Controller
Red Lion Automation Series
Rugged Standalone Industrial Controller
The Graphite
®
Edge Controller is a rugged all-in-one industrial solution that reduces cost and complexity by combining IEC 61131 control capabilities with networking and data visualization.
Integrating communication and control into factory automation and process control applications has never been easier. With all-metal construction, a built-in web server, data logging with SD card, and Red Lion’s Crimson ® 3.0 software with Crimson Control functionality, our rugged controller operates in the harshest environments to provide a single programming solution for control, networking and data visualization. Simply use industry-standard IEC 61131 programming languages such as ladder logic, function block, structured text and instruction list to develop logic code much like a programmable logic controller (PLC) or remote telemetry unit (RTU) without the added expense of additional software. In addition, select from a variety of I/O, PID control and communications modules to connect, monitor and control a wide array of field devices – regardless of location – to meet specific application requirements.
INDUSTRY APPLICATIONS
> Factory Automation
> Oil & Gas
> Power & Utilities
> Water/Wastewater
> Transportation
> Industrial Internet of Things (IIoT)
PRODUCT HIGHLIGHTS
> Industry-Standard Control Language Support
> Protocol Conversion of over 300 Drivers
> Support up to 13 Simultaneous Protocol Conversions
> Web Server for Data Visualization
> Real-Time Data Logging to SD Card or via FTP
> Rugged Construction for Extreme Protection
> Wide Operating Temperature Range
> Scalable Modules & Expansion Options
FEATURES & BENEFITS
> Powerful Crimson 3.0 Software with Crimson Control
• Intuitive drag-and-drop graphical software for easy setup
• Use industry-standard IEC 61131 programming languages such as ladder logic, function block, structured text and instruction list
• No special gateways or added fees for protocol conversion
• Easy single-solution configuration eliminates need for third-party software
> Versatile I/O Module & Expansion Options
• Support small scale applications using on-board module slot for functions including PID control, digital or analog I/O or specialized communications
• Connect Graphite Expansion Racks to easily scale for larger application or additional I/O
• Extend even further with E3 I/O ™ high-density modules
C
R
UL
LISTED
US compliant
> Industry-Leading Protocol Conversion
• Communicate with over 300 major industrial protocols
• Support up to 13 simultaneous protocol conversions
• Convert between serial, USB and Ethernet devices
• Manage multi-vendor environments with ease
> Rugged Environmental Specifications
• Wide -40° to 70°C operating temperature
• High shock and vibration tolerance
• CE, UL/cUL and UL/cUL Hazardous approvals
> Powerful Integration Functionality
• Ethernet, USB and serial ports make communication simple
• Built-in data logging enhances troubleshooting and helps meet regulatory requirements
• Robust web server provides remote visualization, access and control to reduce costly site visits
Graphite Edge Controller Specifications
POWER INPUT
Input Voltage: 10-30 VDC
Must use a Class 2 circuit according to National Electrical Code (NEC),
NFPA-70 or Canadian Electrical Code (CEC), Part I, C22.1 or a Limited
Power Supply (LPS) according to IEC 60950-1 or Limited energy circuit according to IEC 61010-1.
Input Voltage
Typical Power (GRAC0001 only)
Maximum Power (GRAC0001 only)
Available Power for Modules
Max Power GRAC0001 With Module(s)
GRAC0001 Power Ratings (Watts)
10 V 12 V 24 V 30 V
4 W
9 W
4 W
9 W
5 W
10 W
5 W
10 W
55 W
64 W 64 W 65 W 65 W
CONNECTORS
USB Port: One (1) USB Type B complies with USB specification 2.0
(high speed, full speed)
USB Host Ports: Two (2) USB Type A complies with USB specification
2.0 Supports full-speed data transfers
Hardware over current protected (0.5 A max per port)
Serial Ports: Format/Baud rates independently configurable
Programming Port:
One (1) RS-232 port with RJ12 connector
Communication Ports:
Two (2) RS-422/485 port via RJ45 connector
Ethernet Ports: 1500 Vrms network isolation
Two (2) 10/100Base-T(X) port via RJ45 connector
Power: High compression cage-clamp terminal block
Wire Strip Length: 0.3” (7.5 mm)
Wire Gauge Capacity: One 14 AWG (1.63 mm) solid, two 18 AWG (1.02 mm) or four 20 AWG (0.81 mm)
ENVIRONMENTAL
Operating Temperature: -40°C to 70°C*
Storage Temperature: -40°C to 85°C
Operating Humidity: 0% to 85% max. RH non-condensing
Altitude: Up to 2000 meters
Panel Mount Vibration to IEC 68-2-6: Operational 5-500 Hz, 4 g
Panel Mount Shock to IEC 68-2-27: Operational 40 g
(10 g, modules w/ relays)
DIN Rail Mount Vibration to IEC 68-2-6: Operational 5-500 Hz, 2 g
DIN Rail Mount Shock to IEC 68-2-27: Operational 15 g
(10 g, modules w/relays)
Requires DIN Rail type: DIN 1010, DIN 1065, or DIN 3065
CERTIFICATIONS AND COMPLIANCES
Product Safety:
EN 61326-1 Immunity to Industrial Locations
Emission CISPR 11 Class A
IEC/EN 61010-1 cULus Listed: File #E302106 cULus Hazardous: File #E317425
Other:
RoHS Compliant
MECHANICAL
Cast aluminum. Installation Category II, Pollution Degree 2 as defined in IEC 60664-1
Case Dimensions:
Height: 6.35” (16.2 cm)
Width: 4.11” (10.5 cm)
Depth: 4.40” (11.2 cm)
Weight: 2.3 lbs (1.03 kg)
Mounting: Panel mount or DIN rail
ORDERING GUIDE
MODEL NUMBER
GRAC0001
DESCRIPTION
Graphite Edge Controller
Up to 4 Optional Expansion Racks (GEXRACK2) can be connected to the
Edge Controller and up to 1 Wide Rack (GEXRACK1) and 3 Expansion Racks
(GEXRACK2) can be tethered via USB.
* Lowest range among equipment used in your Graphite system; refer to user manual.
Specifications are subject to change. Visit www.redlion.net for more information.
DIMENSIONS 4.40 (112)
4.11 (104.5) 2.97 (76)
6.35
(161.4)
5.95
(151.1)
2.79
(70.8)
Module sold separately w w w . r e d l i o n . n e t
Americas [email protected]
Asia-Pacific [email protected]
Europe
Middle East
Africa [email protected]
As the global experts in communication, monitoring and control for industrial automation and networking, Red Lion has been delivering innovative solutions for over forty years. Our award-winning technology enables companies worldwide to gain real-time data visibility that drives productivity. Product brands include Red Lion, N-Tron and Sixnet. With headquarters in York, Pennsylvania, the company has offices across the
Americas, Asia-Pacific and Europe. For more information, please visit www.redlion.net. Red Lion is a Spectris company.
ADLD0470 060719 © 2017 Red Lion Controls, Inc. All rights reserved. Red Lion, the Red Lion logo, N-Tron and Sixnet are registered trademarks of Red Lion Controls, Inc. All other company and product names are trademarks of their respective owners.
