Digimerge ACCDPS262B 16+1 Port High-Speed PoE Gigabit Switch Quick Start Guide
Add to my manuals
2 Pages
advertisement
1
Network Cameras*
16+1 PoE+ Camera Switch Quick Start Guide
2
Router / LAN*
Up to 300ft / 91m
Front Panel
* Not included / sold separately
Back Panel
100-240V AC
3
Power
SFP port
Remove dust cap to use
NOTE: Use RJ45 or SFP to connect to port 17. You may not use both simultaneously.
ACCDPS262B_QSG_EN_R1
16+1 PoE+ Camera Switch Quick Start Guide
LED Indicators
System
NAME
PWR
COLOR MEANING
Green ON: The switch is receiving power.
OFF: The switch is not receiving power.
MEANING
Port 1 ~ 16
NAME
LNK/ACT
COLOR
Green
PoE In-Use Orange
MEANING
ON: Successfully established link at 10/100Mbps.
FLASHING: Switch is sending/receiving data.
OFF: No connection.
ON: Port is providing 51V DC in-line power.
OFF: Connected device is not a PoE Powered Device (PD).
Port 17 (RJ-45)
NAME
LNK/ACT
COLOR
Green
MEANING
ON: Successfully established link at 10/100/1000Mbps.
FLASHING: Switch is sending/receiving data.
OFF: No connection.
Port 17 (SFP)
NAME
LNK/ACT
COLOR
Green
MEANING
ON: Successfully established link at 1000Mbps
FLASHING: Switch is sending/receiving data.
OFF: No connection.
Technical Specifications
NAME
Ports
SPECIFICATION
16× 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports
1× 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X port
1× 1000Base-X SFP interfaces, shared with port 17
IEEE 802.3af / 802.3at PoE PoE Standard
PoE Power Output
Total Power Ouput
Standard Compliance
Per Port 51V DC, Max. 30.8W
220W across ports 1~16 (at 104°F / 40°C)
200W across ports 1~16 (at 122°F / 50°C)
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Operating Humidity 5 ~ 95% (non-condensing)
Operating Temperature 32° ~ 122°F / 0° ~ 50°C
Power Input 100~240V AC, 50/60Hz, 3.5A
Dimensions
(W×D×H)
17.4 × 8.2 × 1.7”
441 × 208 × 44mm
1U height
Weight 5.9lbs / 2.7kg
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
ACCDPS262B_QSG_EN_R1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement