WIRELESS LED PUCK LIGHT
OWNER’S MANUAL
Model # BRRC152IR, BRRC153IR
FIG. 1
1
LOCATION OF CONTROLS:
1. ON/OFF Tap Lens
2. Battery Compartment
INSTALLATION:
If you are using these puck lights with a remote make sure the icon is facing out, towards the remote, when mounting the puck lights (Fig. 2). This will ensure that the puck lights receive the signal from the remote. The remote is NOT included with this product.
Adhesive Tape:
1. Make sure the area where you want to attach
the light is clean and clear of debris and dust.
2. Attach adhesive tape to mounting bracket (Fig. 3).
3. Place mounting bracket in desired location.
Press firmly to ensure adhesive sticks.
CAUTION: Adhesive tape may remove paint or damage surface when removed.
Screws:
1. Remove mounting bracket from light.
2. Use the mounting bracket as a guide to drill two (2) pilot
holes. Secure mounting bracket to surface with screws
(included). Do not over tighten screws.
3. Attach light to mounting bracket.
OPERATING INSTRUCTIONS:
ON/OFF Tap Lens:
1. Press lens to turn light ON/OFF.
Remote Control Operation:
The remote is NOT included with this product. These puck lights are compatible with the remote sold with our other remote controlled puck light sets. Refer to the manual included with the remote controlled puck light set for operating instructions.
2
FIG. 3
FIG. 2
BATTERIES:
If the LEDs appear to be dim the batteries need to be replaced.
TO REPLACE THE BATTERIES
1. Remove battery compartment cover.
2. Remove old batteries (if replacing batteries).
3. Insert three (3) new AA batteries (not included)
4. Make sure to follow the battery polarity guide
when installing new batteries (Fig. 4).
5. Replace battery compartment cover.
PRODUCT INFORMATION CHART:
Light Output (Lumens)
Correlated Color Temperature (CCT)
Run Time
Batteries (not included)
Number of LEDs
LED Beam Angle
55
3000 (Warm White)
100 hours
AA x 3
3
120º
Dimensions: 3-3/8” diameter / 1-1/4” high
FIG. 4
WARNING:
To reduce the risk of electrical shock, do not put the unit in water or other liquid. To clean, use a soft dry cloth. Do not place or store the unit where it can fall or be pulled into a sink or tub.
BATTERY PRECAUTIONS:
1. Use only the size and type of batteries specified.
2. Always purchase the correct size and grade of battery most suitable for the intended use.
3. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
4. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickel Cadmium) batteries.
5. Replace all batteries of a set at the same time. Do not mix old and new batteries.
6. Clean the battery contacts and also those of the device prior to battery installation.
7. Do not dispose of batteries in fire.
8. Remove batteries if consumed or if product is to be left unused for an extended period of time.
INDOOR USE ONLY
ONE-YEAR LIMITED WARRANTY:
This product is warranted to the original purchaser that the product will be free from defects in materials and workmanship for a period of one year from the date of purchase. Additional details are available at www.brilliantevolution.com.
© 2017 London Johnson, Inc. All Rights Reserved. www.brilliantevolution.com
Made in China
