Nature Power 53905 100 Watt Complete Solar Power Kit: 1x100 Watt Solar Panel, 300 Watt Power Inverter, 11 Amp Charge Controller Installation Guide

Nature
pliz Sen,
Electrical Installation
Please confirm that you have all parts to your system before starting installation.
Below image shows how to connect the solar panel to the 12 Volt batteries
Step1 Cover the panel with card board, cloth, or a similar option so there are no output power
Step2 Connect the charge controller to the solar panel
Step3 Connect the battery clamps to the charge controller
Step4 Connect the battery clamps to the battery in parallel. Parallel connections = Positive to
Positive and Negative to Negative
Step5 Remove the cover from solar panel
ds
When installing solar panels configuration and systems, please carefully observe correct cable
connections and polarity. The solar panels can be damaged by not observing the correct electrical
installation and polarity; in addition, this will void the warranty of your solar panels. Having a mult:
meter handy will help to confirm correct polarities.
Extending the wiring
If you choose to mount your solar panel further away from the charge controller by extending the
wiring we recommend the following gauges at each specified distance. Use stranded wire instead of
solid wire. Stranded wire does not fatigue or loose connections over time.
Appropriate wire gauge should be used for distance and total amperage, for further information please
consult with a licensed electrician or through an online wiring chart calculator
To prevent loss of current we suggest mounting the solar panel within 20 feet of the charge controller and the
charge controller should be installed within 5 feet of the battery.