USL SK19211E-PW Mission White Computer Desk Assembly Instructions

 SK19211E
MISSION DESK
ASSEMBLY INSTRUCTIONS
Made In China
1/11
Thank you for purchasing this quality product. Be sure to check all
packing material carefully for small parts, which may have came
loose inside the carton during shipment. Count all parts and material
hardware, then compare with parts list to be sure all parts are
present. If any parts are missing or damaged, phone, fax, or mail to
our Customer Service Department for efficient and speedy service.
Please indicate the model number and code letter of part(s) needed.
IMPORTANT NOTE: Follow instructions listed below in proper
sequence as numbered to assure fast,easy and correct assembly.
PARTS LIST
A
N
TOP PANEL-1PC
LEFT SIDE PANEL-1PC
RIGHT SIDE PANEL-1PC
LEFT FRONT PANEL-1PC
\
E
RIGHT FRONT PANEL-1PC
0
>
BACK PANEL-1PC
TN
LEFT PARTITION-1PC
LL
RIGHT PARTITION-1PC
FM
FRONT CROSS BRACE-1PC
A
BACK CROSS BRACE-1PC
Pa
DRAWER
FRONT PANEL-1PC
DRAWER
LEFT SIDE PANEL-1PC
2/11
SUPPORT PANEL-1PC
DRAWER DRAWER DRAWER
RIGHT SIDE PANEL-1PC BACK PANEL-1PC BOTTOM PANEL-1PC
o,
WOOD DOWEL-36PCS
«(= 6
CAM
LOCK BOLT-22PCS
CAM LOCK-22PCS
«ur Y
1"L FLAT HEAD
SCREW-5PCS
«IÓ
1-1/4"L FLAT HEAD
SCREW-2PCS
a e f
/
© pe
@5/32"X3/4"
PLASTIC COVER-2PCS KNOB-1PC KNOB BOLT-1PC
NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE
3/11
HOW TO SEPARATE GLIDES
SAFETY RELEASE TAB
PRIOR TO ASSEMBLY, WE SUGGEST SEPARATING THE INNER GLIDES FROM THE OUTER-GLIDES,
SIMPLY PULL THE LEFT/RIGHT INNER GLIDES FROM THE OUTER GLIDES EXPOSING A SMALL
BLACK SAFETY RELEASE TAB, BY PUSHING THE SAFETY RELEASE TAB. YOU WILL BE ABLE TO
SEPARATE THE GLIDES.
4/11
NOTE: e UPON OPENING, THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST
AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT. IN
ORDER TO PREVENT DAMAGE DURING ASSEMBLY. PLEASE ASSEMBLE THIS ITEM
WITH AT LEAST TWO PEOPLE.
NOTE: TURN THE CAM-BOLT SCREWS UNTIL THEY
ARE TIGHT, THE SHOULDER SHOULD BE
AGAINST THE SURFACE OF THE PART.
HOW TO USE THE CAM-TOOL
ARROW
NN
NOTE: e THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS.
5/11
FIG 1
6/11
FIG 2
1/11
FIG 3
8/11
FIG 4
NS
9/11
FIG 5
10/11
FIG 6
11/11