Pacific Entries 30 in. x 84 in. Rustic Espresso 2 Panel Knotty Alder Sliding Barn Door Kit installation Guide

 Crest [LITT U
Assembly Instructions
Pacific
Taking Pride in Providing You the Perfect Door
READ ALL INSTRUCTIONS PRIOR TO STARTING!
BEFORE GETTING STARTED: PRECAUTION
TOOLS REQUIRED
Assembled door is heavy and should be lifted by 2 people at all times. Mishandling of
heavy objects (i.e., doors) may cause a loss of balance resulting in injury. Always take В
precaution in assuring proper balance before moving the door. Safety shoes should also
Phillips Head Screwdriver
be worn to prevent any foot injuries.
PARTS 1. Lay all pieces out according to part number (see PARTS at left). Left and
Right side planks should have holes for hardware installation positioned at
|. Top Rail top of door (figure 1). NOTE: middle planks can be in any order according
. Top Rai
to customer preference; design your own door!
OP TP ETE 2. Align hardware installation holes on top rail and side planks, then install all
screws in top rail in predrilled screw holes (figure 2).
3. Repeat for bottom rail (figure 3). Ensure notch is positioned as shown.
6 4. Install all screws in Horizontal rail in predrilled screw holes (figure 4).
Cc
<||=||- = You are ready for your barn door installation. Follow hardware instructions
—
|< ||| = included.
3 | |Ф | |9 ||. | |= ©
е- |155 | |5 | |5 || =
||| 00 O я a Y
2 =|/=||=||)2| |I 1
| ||| ||| | lA A SN E N
| hardware hardware install
holes holes screws
Figure 1 Figure 2
2. Bottom Rail
PROFILES
Top Rail
| |
Bottom Rail
| —
Left Plank
[$
Middle Plank
с
install
Right Plank screws
Z — em
Horizontal Plank LL 4 Y.
L — 1 TN
. notch :
Figure 3 Figure 4
rev. 5-26-16
">