SERVICE PARTS LIST
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
M18™ FUEL™ ONE KEY 8.25" TABLE SAW
CATALOG NO. 2736-20 SERIAL
NUMBER
J35A
BULLETIN NO.
54-00-2736
REVISED BULLETIN DATE
Sept. 2018
WIRING INSTRUCTION
TABLE TOP and RAIL ASSY.
FRAME and PANEL ASSY.
DUST COLLECTION ASSY.
Page 2
Page 3
Page 4
GEARCASE and MOTOR ASSY. Page 5
ATTACHMENTS/ACCESSORIES Page 6
TORQUE SPECIFICATIONS Page 7
Electronics Servicing for Milwaukee Electric Tool ONE KEY Products can only be performed at this
Milwaukee factory Central Repair Center:
MILWAUKEE ELECTRIC TOOL Central Repair
1013 Sycamore Avenue
l
Greenwood, MS 38930-7277
Please send your tool directly to this location for service.
Or
Via e -Service at: www.milwaukeetool.com/e-service questions, please call 1.800.SAWDUST (1.800.729.3878)
Or
Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.
A copy of the proof of purchase should be included with the return product.
If you have questions please contact Milwaukee Product Service at:
Product Technical Support via phone at: 262.783.8642
Or
Via email at: METProductSupport @milwaukeetool.com
Disassembly of electronics package is not recommended and could void the warranty.
Drwg. 1
TABLE TOP and RAIL ASSEMBLY
95
(4x)
Apply a drop of
Red Loctite ® 277 to threads of screw prior to installation
96
94
91
99
257
266 84
85
98
256
00
0
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
270 91 92 93 94 95
96 98 99 256 257
93
92
82
81
90
(6x)
88
(7)
249
63
(8x)
85
(4x)
89
87
86
(2x)
LUBRICATION
48
47
(2x) 58
(2x) 52
(4x)
FIG. PART NO. DESCRIPTION OF PART
47 06-55-0005 M10 Hex Nut with Nylon
48 43-98-0013 Fence Pinion Knob
49 42-40-0002 Fence Pinion Bushing
50 40-50-0121 Spring
51 42-36-0016 Fence Pinion Bushing Bracket
(2)
(1)
(2)
(2)
(2)
52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 w/Nylok (4)
53 45-88-0008 Washer
54 34-60-0013 E-Ring
55 45-08-0001 Fence Pinion Shaft
56 44-60-0101 Spring Pin
57 45-60-0011 Fence Pinion Bearing Support
58 32-60-0011 Fence Pinion
59 45-88-0009 Washer
60 40-50-0131 Spring
61 --------------- Latching Shaft
62 42-68-0012 Clamping Plate
(1)
(2)
63 06-82-0074 M5 x 13mm Pan Hd. Sems T-25 w/Nylok (16)
64 --------------- Latching Adjustment Shaft (1)
(1)
(1)
(2)
(2)
(2)
(4)
(2)
(2)
(1)
(1)
(2)
65 06-55-0011 M6 Hex Nut
66 44-40-0011 Latching Adjustment Nut
67 --------------- Spring Pin
68 --------------- Latching Shaft and Plate
69 43-62-0011 Fence Lock Handle
70 45-88-0043 Washer
71 06-55-0006 M5 Hex Nut w/ Nylon
72 42-68-0013 Clamping Plate
73 --------------- Latching Plate
74 --------------- Rivet
75 45-88-0044 Washer
76 40-50-0139 Spring
77 --------------- Latching Spring Shaft
78 --------------- Latching Plate
79 --------------- Rivet
80 --------------- Latching Shaft
81 45-64-0005 Table Top
82 43-82-0010 Fence Ruler
84 --------------- Fence Rail Mount
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(2)
(1)
(3)
(2)
(1)
(1)
(1)
(1)
57
(2x)
53
(2x)
54
84
(2x)
56
(2x)
55
49
(2x)
50
(2x)
51
(2x)
59
(4x)
60
(2x)
80
74
(3x)
79
73
267 67 68 72 73 74
77 78 79 80
78
77
72
(4x)
76
75
(2x)
68
66
67
65
69
70
71
271
268
64 of pinion shaft
49 50
51 52
61 64
74
61
63
(4x)
62
(2x)
FIG. PART NO. DESCRIPTION OF PART
85 --------------- Fence Rail Cushion
86 44-81-0011 Sliding Fence Rail
87 43-82-0011 Fence Length Indicator
NO REQ.
(4)
(2)
(1)
88 06-54-0010 M6 Square Nut (7)
89 06-75-0011 M6 x 8mm Pan Hd. Washer Screw, S4 (1)
90 06-75-0022 M6 x 6mm CWH Machine Screw, S4 (6)
91 42-50-0011 Throat Plate Cam
92 05-89-0010 M4 x 14mm PWH T-20 Tapt. Screw
93 40-50-0141 Spring
94 44-66-0042 Throat Plate
95 06-83-0011 M5 x 8mm Set Screw, S2.5
96 43-98-0021 Throat Plate Attachment Knob
98 --------------- Large Throat Plate Insert
99 --------------- Small Throat Plate Insert
249 10-20-9007 Fence Length Indicator Label
256 --------------- Double Sided Tape for Large Insert
257 --------------- Double Sided Tape for Small Insert
266 44-81-0012 Mounting Rail Kit
267 44-20-0019 Fence Extension Latching Assembly 1 (1)
(1)
(1)
(1)
(2)
268 44-20-0022 Fence Extension Latching Assembly 2 (1)
270 14-67-0015 Throat Plate Assembly
271 14-86-0010 Fence Pinion Bushing Assembly
(1)
(2)
(4)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
2
FRAME and PANEL ASSEMBLY
170
(3x)
160
(2x)
170
(4x)
169
174
(2x)
185
186
188
172
173
(2x)
171
(4x)
254
190
189
(2x)
175
43
178
168
251
177
176
279
155
(4x)
156
(4x)
157
(4x)
158
(4x)
152 153
154
183
187
160
(2x) 161
184
163
(2x)
182
181
(2x)
171
(6x)
180
179
9
(5x)
278 9 179
180
160
(3x)
71
(2x)
162
166
(8x)
280 165 166
167
159
FIG. PART NO. DESCRIPTION OF PART
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw
43 05-81-0022 M4 x 10mm Pan Hd. ST T-20 Screw
71 06-55-0006 M5 Hex Nut with Nylon
NO REQ.
(5)
(1)
(2)
152 --------------- Handle Halve A
153 --------------- Handle Halve B
(1)
(1)
154 --------------- M4 x 13.5mm Pan Hd. ST T-20 Screw (2)
155 45-88-0046 Washer
156 42-40-0012 Rubber Bushing
157 45-88-0047 Washer
(4)
(4)
(4)
158 05-89-0011 M6 x 11mm Cap Hd. Machine Screw, S5 (4)
159 --------------- Frame (1)
160 06-82-0093 M5 x 8mm Pan Hd. Tapt. T-25 Screw (7)
161 42-70-0026 Miter Gauge Clip
162 44-68-0011 16mm Plug
163 43-98-0017 Tool-Less Lever
164 40-50-0151 Spring
165 --------------- Foot Cover A (2)
166 --------------- M4 x 6mm Pan Hd. Tapt. T-20 Screw (8)
(1)
(1)
(2)
(2)
167 --------------- Foot Cover B
168 10-20-1681 Bevel Angle Label
(2)
(1)
169 42-92-0013 Front Cover Panel (1)
170 06-82-0096 M5 x 13mm Pan Hd. T-25 Mach. Screw (7)
171 06-82-0098 M5 x 10mm Pan Hd. ST T-20 Screw (10)
172 44-66-0066 Bevel Plate (1)
(2) 173 42-50-0012 Bevel Adjustment Cam
174 06-82-0101 M5 x 8mm Cap Washer Hd. Screw, S4 (2)
175 43-72-0008 Relay Carrier
176 42-92-0014 Electronic Cover
(1)
(1)
167
(2x)
252
165
(2x)
FIG. PART NO. DESCRIPTION OF PART
177 44-66-0067 Battery Plate
178 05-91-0005 External Tooth Spring Washer
179 --------------- Battery Housing Mount-Left
180 --------------- Battery Housing Mount-Right
181 06-82-0103 M3 x 6mm ST Screw
182 23-27-0010 Magnet, Table Saw Switch Panel
183 23-35-0010 Switch Panel
184 23-66-0014 Switch
185 44-60-0091 Pin
186 40-50-0156 Switch Cover Spring
187 42-92-0018 Switch Cover
188 34-60-0022 E-Ring
189 06-82-0106 M3 x 10mm Pan Hd. ST T-10 Screw
190 42-92-0019 Side Cover Panel
251 10-20-9003 Front Panel Label
252 10-20-9004 Frame Label
254 12-20-0124 Service Nameplate
278 14-38-0036 Battery Housing Mount Kit
279 14-34-0021 Handle Kit
280 42-38-0022 Foot Cover Kit
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
NO REQ.
(1)
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
3
191
(5x)
253
DUST COLLECTION ASSEMBLY
181
204
200
192 198
199
195
193
157
194
196
197
67
220
201
(2x)
202
203
197
(2x)
281 67
198
191
(3x)
216
NOTE:
When servicing gears or gearcase, 90-95% of old grease must be removed prior to new grease being added. Clean gear assemblies with clean, dry cloth.
225
LUBRICATION:
= Type ‘Y’ Grease, 49-08-5270
198 Apply a light film of grease to the
Height Adjustment Handle Shaft as shown prior to installing onto
Dust Collection Casting.
226
204 Apply a liberal amount of grease to Height Adjustment Bevel Gear-1 being sure to coat all of the teeth.
53
231
(2x)
191
(4x)
227
191
228
229
230
205 Apply a liberal amount of grease to the Height Adjustment Bevel
Gear-2, being sure to coat all of the teeth.
210 Apply a light coat of grease to the threads and shaft of the Height
Adjustment Screw.
212 Place a light film of grease to entire Height Adjustment Shaft-A.
213 Place a light film of grease to entire Height Adjustment Shaft-B.
220 Place a light coat of grease to the contact areas within the channel of the Front Bevel Mechanism.
223 Place a light coat of grease to the contact areas within the channel of the Back Bevel Mechanism.
222
FIG. PART NO. DESCRIPTION OF PART NO REQ.
52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Screw (4)
53 45-88-0008 Washer
67 --------------- Spring Pin
157 45-88-0047 Washer
181 06-82-0103 M3 x 6mm ST Screw
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Mach. Screw (15)
192 42-92-0021 Cloth Dust Cover-2
193 05-89-0012 M6 x 13mm CH Mach. Screw, S5
194 06-55-0008 M8 Hex Nut with Nylon
195 43-98-0019 Height Adjustment Knob
196 45-94-0011 Height Adjustment Disk
197 06-55-0012 M6 Hex Nut with Nylon
198 --------------- Height Adjustment Handle Shaft
199 34-40-0106 O-Ring
200 34-60-0019 E-Ring
201 45-88-0048 Washer
202 45-88-0049 Wave Washer
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(3)
(1)
(1)
(1)
(2)
(1)
211
(6x)
207
(2x)
211
210
52
(4x)
209
(2x)
208
212
206
205
232
214
(2x)
215
213
224
191
(2x)
223
221
(4x)
219
(4x)
218
(4x)
217
(4x)
235
(3x)
234
(3x)
233
FIG. PART NO. DESCRIPTION OF PART
203 45-88-0051 Washer
204 32-05-0012 Height Adjustment Bevel Gear-1
205 32-05-0013 Height Adjustment Bevel Gear-2
NO REQ.
(1)
(1)
(1)
206 42-28-0011 Height Adjustment Block (1)
207 06-75-0027 M5 x 24mm Cap Hd. Sems Screw, S4 (2)
208 45-88-0059 Wave Washer
209 45-88-0060 Washer
(1)
(1)
210 45-04-0011 Height Adjustment Screw (1)
211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw (7)
212 45-08-0011 Height Adjustment Shaft-A
213 45-08-0012 Height Adjustment Shaft-B
(1)
(1)
214 06-82-0113 M4 x 12mm Pan Hd. T-20 Mach. Screw (2)
215 42-92-0023 Riving Knife Dust Cover
216 42-92-0022 Front Dust Cover
(1)
(1)
217 06-82-0107 M6 x 14mm Pan Hd. T-25 Mach. Screw (4)
218 05-91-0010 External Tooth Spring Washer
219 44-60-0092 Spring Pin
220 14-04-0005 Front Bevel Mechanism Assembly
221 06-75-0031 M6 x 21.5mm Cap Hd. Sems, S5
222 28-50-0011 Dust Collection Casting
223 14-04-0035 Back Bevel Mechanism Assembly
(1)
(1)
224 42-92-0024 Back Dust Cover (1)
225 06-82-0109 M5 x 13mm Pan Hd. Sems T-25 Screw (1)
(4)
(4)
(1)
(4)
226 31-44-0122 Bevel Handle
227 45-88-0065 Washer
228 05-77-0011 M10 x 25mm Hex Machine Screw, M5 (1)
229 44-72-0015 Bevel Indicator
230 05-91-0015 External Tooth Spring Washer
231 44-66-0068 Dust Cloth Insert Plate
232 42-92-0026 Cloth Dust Cover-1
233 42-92-0027 Dust Collection Cover
234 05-77-0012 M5 x 16mm Wing Screw
(1)
(1)
(1)
(1)
(2)
(1)
(1)
(3)
235 06-75-0029 M5 x 18mm Cap Hd. Mach. Screw, S4 (3)
253 44-66-0069 Dust Cloth Insert Plate-2 (1)
281 45-08-0013 Height Adjustment Handle Shaft Assy. (1)
4
GEARCASE and MOTOR ASSEMBLY 111
110
109
273 95 100 101 102 103 104 105
106 107 108 109 110 111
108
107
(2x)
17
145
274 119 121 122 123 124
125 126 127 128 129
129
144
(3x)
128
101
142
(6x)
124
106
100
143
105
140
130
127
126
104
95
(3x)
141
139
125
138
123
114
122
137
(3x)
136
121
146 147 119
134 118
135
(2x)
133
117
116
150
148 149
276 137 138 139
140 141
277 127 133 134
135 136
127
(2x)
132
131
113
112
(2x)
DO NOT attempt to service or replace the electronics package #276. Electronics Servicing can only be performed at this Milwaukee factory Central Repair Center:
MILWAUKEE ELECTRIC TOOL Central Repair
1013 Sycamore Avenue l Greenwood, MS
38930-7277
NOTE:
When servicing gears or gearcase,
90-95% of old grease must be removed prior to new grease being added. Clean gear assemblies with clean, dry cloth.
FIG. PART NO. DESCRIPTION OF PART
17 43-97-0010 Riving Knife
NO REQ.
(1)
95 06-83-0011 M5 x 8mm Set Screw, S2.5 (3)
100 --------------- M4 x 8mm Pan Hd. T-20 Sems Screw (1)
101 --------------- Stem (1)
102 --------------- M5 x 16mm Cap Hd. Mach. Screw, S4 (2)
103 --------------- M4 x 22.5mm Cap Hd. Mach. Screw, S4 (2)
104 --------------- Bowed Retainer
105 --------------- Riving Knife Attachment Plate
106 --------------- Spring Sleeve
107 --------------- M4 Hex Nut with Nylon
108 --------------- Spring
109 --------------- Anyi-Rotating Washer
110 --------------- Riving Knife Clamp Handle
111 --------------- Handle Shaft
112 06-82-0076 M5 x 13mm Pan Hd. T-25 Mach. Screw (2)
113 44-66-0043 Blade Change Outer Plate
114 44-66-0044 Blade Locking Plate
(1)
(1)
115 06-82-0078 M5 x 20mm Pan Hd. T-25 Mach. Screw (3)
116 40-50-0146 Spring (1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
117 06-55-0007 5/8-18 UNF RH Hex Nut
118 43-34-0011 Outer Flange Washer
119 --------------- Blade Shaft
121 --------------- Retaining Ring
122 --------------- Gearcase Bearing Plate
123 --------------- Sealed Bearing
124 --------------- O-Ring
125 --------------- Gearcase Cap
126 --------------- Helical Gear
127 --------------- Retaining Ring
128 --------------- Sealed Bearing
129 34-40-0101 O-Ring
130 34-40-0103 O-Ring
131 28-14-0006 Gearcase
132 34-40-0104 O-Ring
133 --------------- Sealed Bearing
134 --------------- Motor Bearing Plate
(1)
(1)
(3)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
135 06-82-0081 M5 x 15mm Pan Hd. T-25 Mach. Screw (6)
136 --------------- Rotor
(1)
(1)
LUBRICATION:
= Type ‘Y’ Grease, 49-08-5270
112 Apply a drop of Red Loctite 277 to the threads of screws prior to installing on Blade Change Outer Plate.
126 Place a liberal amount of grease to the Helical Gear being sure to coat all gear teeth.
131 Place a heavy coat of grease in the gear cavity of Gearcase.
136 Apply a liberal amount of grease to the Pinion Gear of the Rotor
Assembly, being sure to cover all gear teeth.
FIG. PART NO. DESCRIPTION OF PART
137 --------------- M4.5 x 22mm Pan Hd. T-20 Screw
138 --------------- Fan Baffle
139 --------------- Stator
140 --------------- Motor Housing
141 --------------- PCBA
142 06-82-0083 M3.5 x 14mm Pan Hd. ST T-10 Screw (6)
143 31-50-0011 Top Motor Cover
144 06-82-0087 M4.5 x 14mm Pan Hd. ST T-20 Screw (3)
145 42-52-0018 Motor End Cap
146 50-11-0020 Coin Cell Battery (CR-2032N/BN)
147 31-50-0012 Bottom Motor Cover
148 31-21-0011 One-Key Battery Cover
NO REQ.
(3)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
149 06-82-0089 M2.6 x 6mm Pan Hd. ST Phillips Screw (1)
150 42-26-0011 8.25" Blade
273 42-68-0014 Riving Knife Clamp Assembly
276 --------------- Electronics Assembly
277 16-07-0010 Rotor Assembly
(1)
(1)
274 14-30-0031 Blade Shaft with Gearcase Cap Assy. (1)
(1)
(1)
5
TABLE SAW ATTACHMENTS / ACCESSORIES
243 242 1
(2x)
2
(2x)
3
(2x)
4 5
(2x)
8
6 7
17
260 1 2 3 4 5 6 7
8 9 10 242 243 244 245
95
(4x)
96 236 247
9
(4x)
10 245 244
Apply a drop of Red Loctite 277 to threads of screw
31
(2x)
92
29
(2x)
30
(2x)
LUBRICATION
262 91 92 93 95
96 236 247
37
263 14 29 30 31 32 33 34 35 36 37
38 39 40 41 42 43 44 45 46 248
91
33
93
34
(2x)
36
(2x)
38
14
45
265 30 31
32 248
44
(2x)
35
(2x)
41
(4x)
41
(2x)
39
18 28 19 20
(2x)
14 21 22
23
24
25
261 14 19 20 21 22 23
24 25 26 27 28 246
27 246 26
11
12
(2x)
14
15
181
264
13
16
11 12 13 14
15 16 181
14
(2x)
40
42
(2x)
43
(4x)
46
6
FIG. PART NO. DESCRIPTION OF PART
1 --------------- M4 x 12mm Pan Hd. ST T-20 Screw
2 --------------- Flat Washer
3 --------------- M4 x 12mm Pan Hd. ST T-20 Screw
4 --------------- Left Blade Guard Wing
5 --------------- Spring Clip
6 --------------- Blade Guard Base-Right
7 --------------- Blade Guard Base-Left
NO REQ.
(2)
(2)
(2)
(1)
(2)
(1)
(1)
8 --------------- Extended Riving Knife
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw
10 --------------- Right Blade Guard Wing
11 --------------- Miter Gauge Knob
12 --------------- Washer
13 --------------- Miter Gauge
(2)
(1)
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Mach. Screw (5)
15 --------------- Miter Gauge Indicator
(1)
(4)
(1)
(1)
16 --------------- Miter Gauge Extrusion
17 43-97-0010 Riving Knife
18 45-96-0020 Wrench
19 --------------- E-Ring
(1)
(1)
(1)
(1)
20 --------------- Retaining Ring
(1)
(2)
21 --------------- Anti-Kickback Pawl Bracket-Right Side (1)
22 --------------- Anti-Kickback Pawl Bracket-Left Side (1)
23 --------------- Spring Pin
24 --------------- Spring
25 --------------- Anti-Kickback Pawl Button
26 --------------- Anti-Kickback Pawl-Left
27 40-50-0081 Spring
(1)
(1)
28 --------------- Anti-Kickback Pawl-Right
29 44-60-0087 3 x 35mm Spring Pin
30 44-60-0088 3 x 24mm Spring Pin
31 44-20-0013 Fence Latching Handle
32 40-50-0098 Fence Latching Spring
33 42-52-0013 Right Fence Latching Cap
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
FIG. PART NO. DESCRIPTION OF PART
34 40-50-0103 Spring
NO REQ.
(2)
35 42-36-0012 Press Spring Bracket (2)
36 05-81-0018 M4 x 10mm Pan Hd. Tapt. T-25 Screw (2)
37 42-30-0005 Primary Fence Extrusion
38 40-50-0108 Push Stick Attachment Spring
39 42-36-0013 Push Stick Attachment Bracket
40 42-52-0015 Left Fence Latching Cap
41 05-81-0019 M5 x 13mm Pan Washer Hd. T-25 Scr. (6)
42 05-81-0021 M5 x 4mm Pan Hd. T-20 Mach. Screw (2)
43 05-81-0022 M4 x 10mm Pan Hd. Tapt. T-20 Screw (4)
44 42-36-0014 Secondary Fence Bracket
(1)
(1)
(1)
(1)
45 42-30-0006 Secondary Fence Extrusion
46 43-72-0007 Push Stick
91 42-50-0011 Throat Plate Cam
92 05-89-0010 M4 x 14 Pan Washer Hd. T-20 Screw (1)
(2)
(1)
(1)
(1)
93 40-50-0141 Spring
95 06-83-0011 M5 x 8mm Set Screw, S2.5
96 43-98-0021 Throat Plate Attachment Knob
181 06-82-0103 M3 x 6mm ST Screw
236 44-66-0046 Dado Throat Plate
242 10-20-9001 Blade Guard Wing Label-Left 1
243 10-20-9002 Blade Guard Wing Label-Left 2
244 10-20-9008 Blade Guard Wing Label-Right 3
245 10-20-9009 Blade Guard Wing Label-Right 4
246 10-20-9012 Anti Kickback Label
247 10-20-9011 Dado Throat Plate Label
248 10-20-9013 Fence Adjustment Label
260 14-32-0015 Blade Guard Wing Assembly
261 14-02-0005 Anti-Kickback Assembly
262 14-67-0010 Throat Plate (Dado) Assembly
263 28-35-0015 Fence Assembly
264 43-46-0015 Miter Gauge Assembly (1)
265 44-20-0017 Fence Latching Handle and Spring Assy. (2)
(1)
(1)
(1)
(2)
(1)
(1)
(1)
(1)
(1)
(4)
(1)
(1)
(1)
(1)
(1)
(1)
SCREW TORQUE SPECIFICATIONS
FIG. PART NO. DESCRIPTION OF FASTENER
TABLE TOP and RAIL ASSEMBLIES
WHERE USED
47 06-55-0005 M10 Hex Nut with Nylon Fence Pinion Knob
52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Nylok Screw Fence Pinion Bushing Bracket
63 06-82-0074 M5 x 13mm Pan Hd. Sems T-25 Nylok Screw Clamping Plate
65 06-55-0011 M6 Hex Nut
71 06-55-0006 M5 Hex Nut with Nylon
89 06-75-0011 M6 x 8mm Pan Hd. Washer Screw, S4
90 06-75-0022 M6 x 6mm CWH Machine Screw, S4
92 05-89-0010 M4 x 14mm PWH T-20 Taptite Screw
Latching Adjustment Shaft
Fence Lock Handle
Fence Length Indicator
Sliding Fence Rail
Throat Plate Cam
FRAME and PANEL ASSEMBLIES
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw
43 05-81-0022 M4 x 10mm Pan Hd. ST T-20 Screw
71 06-55-0006 M5 Hex Nut with Nylon
154 --------------- M4 x 13.5mm Pan Hd. ST T-20 Screw
158 05-89-0011 M6 x 11mm Cap Hd. Machine Screw, S5
160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw
160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw
160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw
166 --------------- M4 x 6mm Pan Hd. Taptite T-20 Screw
170 06-82-0096 M5 x 13mm Pan Hd. T-25 Machine Screw
170 06-82-0096 M5 x 13mm Pan Hd. T-25 Machine Screw
171 06-82-0098 M5 x 10mm Pan Hd. ST T-20 Screw
174 06-82-0101 M5 x 8mm Cap Washer Head Screw, S4
181 06-82-0103 M3 x 6mm ST Screw
189 06-82-0106 M3 x 10mm Pan Hd. ST T-10 Screw
Battery Housing Mount-Left
Battery Plate
Tool-Less Lever
Handle Halve B
Frame
Miter Gage Clip
Electronic Cover
Relay Carrier
Foot Cover
Bevel Plate, Battery Plate
Side Cover Panel
Switch Panel, Bevel Adjustment Cam
Front Cover Panel
Switch Panel
Switch Panel
DUST COLLECTION ASSEMBLY
52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Screw
181 06-82-0103 M3 x 6mm ST Screw
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw
193 05-89-0012 M6 x 13mmCH Machine Screw, S5
194 06-55-0008 M8 Hex Nut with Nylon
197 06-55-0012 M6 Hex Nut with Nylon
207 06-75-0027 M5 x 24mm Cap Hd. Sems Screw, S4
211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw
211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw
214 06-82-0113 M4 x 12mm Pan Hd. T-20 Machine Screw
217 06-82-0107 M6 x 14mm Pan Hd. T-25 Machine Screw
221 06-75-0031 M6 x 21.5mm Cap Hd. Sems, S5
225 06-82-0109 M5 x 13mm Pan Hd. Sems T-25 Screw
228 05-77-0011 M10 x 25mm Hex Machine Screw, M5
234 05-77-0012 M5 x 16mm Wing Screw
235 06-75-0029 M5 x 18mm Cap hd. Machine Screw, S4
GEARCASE and MOTOR ASSEMBLIES
100 --------------- M4 x 8mm Pan Hd. T-20 Sems Screw
101 --------------- Stem
102 --------------- M5 x 16mm Cap Hd. Machine Screw, S4
103 --------------- M4 x 22.5mm Cap Hd. Machine Screw, S4
112 06-82-0076 M5 x 13mm Pan Hd. T-25 Machine Screw
115 06-82-0078 M5 x 20mm Pan Hd. T-25 Machine Screw
117 06-55-0007 5/8-18 UNF RH Hex Nut
135 06-82-0081 M5 x 15mm Pan Hd. T-25 Machine Screw
135 06-82-0081 M5 x 15mm Pan Hd. T-25 Machine Screw
137 --------------- M4.5 x 22mm Pan Hd. T-20 Screw
142 06-82-0083 M3.5 x 14mm Pan Hd. ST T-10 Screw
144 06-82-0087 M4.5 x 14mm Pan Hd. ST T-20 Screw
149 06-82-0089 M2.6 x 6mm Pan Hd. ST Phillips Screw
TABLE SAW ATTACHMENTS and ACCESSORIES
1 --------------- M4 x 12mm Pan Hd. ST T-20 Screw
3 --------------- M4 x 12mm Pan Hd. ST T-20 Screw
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw
36 05-81-0018 M4 x 10mm Pan Hd. Taptite T-25 Screw
41 05-81-0019 M5 x 13mm Pan Washer Hd. T-25 Screw
42 05-81-0021 M5 x 4mm Pan Hd. T-20 Machine Screw
43 05-81-0022 M4 x 10mm Pan Hd. Taptite T-20 Screw
92 05-89-0010 M4 x 14mm Pan Washer Hd. T-20 Screw
181 06-82-0103 M3 x 6mm ST Screw
Height Adjustment Shafts
Cloth Dust Cover-2
Cloth Dust Cover-2
Front Dust Cover
Bevel Indicator
Cloth Dust Cover-1
Back Dust Cover
Height Adjustment Knob
35-40 30-34
6-7 5-6
14-17 12-14
8-10 7-8
20-25 16-21
20-25 16-21
30-34 26-29
Height Adjustment Disk
Height Adjustment Bevel Gears 1 & 2
Height Adjustment Block
Cloth Dust Cover-2
20-25 16-21
20-25 16-21
20-26 16-22
35-40 30-34
Height Adjustment Screw
Riving Knive Dust Cover
14-17 12-14
20-26 16-22
6-7 5-6
Front & Back Bevel Mechanism Assemblies 65-70 56-60
Front & Back Bevel Mechanism Assemblies 90-100 78-86
Bevel Handle
Dust Collection Casting
Dust Collection Cover
Dust Collection Casting
20-25 16-21
40-43 34-37
8-10 7-8
8-10 7-8
Bowed Retainer
Bowed Retainer
Bowed Retainer
Bowed Retainer
Blade Change Outer Plate
Gearcase Bearing Plate
Blade Shaft
Motor Bearing Plate
PCBA
Fan Baffle, Stator
Top Motor Cover
Motor Housing
One-Key Battery Cover
SEAT TORQUE
(KG/CM) (IN/LBS)
30-35 26-30
32-36 27-31
32-36 27-31
80-85 69-73
13-18 11-15
10-15 8-13
28-32 24-27
22-26 19-22
10-15 8-13
12-15 10-13
15-20 13-16
9-11 7-9
55-60 47-52
15-20 13-16
8-12 7-10
20-25 16-21
15-20 13-16
35-40 30-34
7-9
7-9
80-85 69-73
4-5
4-5
6-7
6-7
3-4
3-4
25-33 21-28
28-32 24-27
30-36 26-31
20-25 16-21
40-45 34-39
35-40 30-34
100-110 86-95
35-40 30-34
15-18 13-15
22-28 19-24
8-10 7-8
8-12 7-10
2.5-3.5 2-3
Left Blade Guard Wing
Left Blade Guard Wing
Blade Guard Base-Left
Miter Gauge Indicator
10-11 8-9
10-11 8-9
10-15 8-13
15-18 13-15
Anti-Kickback Pawl Bracket-Right Side
Push Stick Attachment Spring & Bracket
15-18 13-15
10-14 8-12
Press Spring Bracket, Fence Latching Caps 14-18 12-15
Primary Fence Extrusion, Fence Bracket
Secondary Fence Bracket
Secondary Fence Bracket & Extrusion
Throat Plate Cam
Miter Gauge Extrusion
36-40 31-34
18-23 15-19
18-23 15-19
22-26 19-22
4-6 3-5
7
