Kichler Lighting 15848AZT Textured Bollard 12V LED Path Light Architectural Bronze Spec Sheet
Add to my manuals
2 Pages
advertisement
12V Textured Bollard Path Light
PROJECT:
TYPE:
ORDERING:
COMMENTS:
15848
OVERVIEW
The Swooping Bollard features a textured surface that reflects a soft, uniform light. Great for illuminating walkways, pathways, and driveways. This fixture combines clean and modern design with robust and durable constructions.
FEATURES
• Thick, robust cast construction
• Textured diffusion lens for glare control and uniform light spread
• No visible seams or screws
• Optimized socket location, easy to lamp
SPECIFICATIONS
Fixture/Housing
Height
Length
Width
Housing Material
Weight Alum
27" / 685.80mm
5.50" / 140mm
4" / 102mm
Cast Aluminum
7.8 lbs / 3.5 kg
Lamp Base
Lamp Base
Electrical
Input Voltage Range
Wattage
12V S8 Wedge Base
Wire
36" of usable #18-2, SPT-1W leads
Ratings/Certification
Wet Locations
9 – 15V
11.5W
FIXTURE
Lens
Polycarbonate Diffusion Lens for even light dispersion and glare control.
Included Accessories
15276 BK - Power Post®
15601 - Surface Mounting Flange (needed for attachments to junction box)
Notes
Fixtures include an 14" in-ground slotted stake and gel-filled cable connectors. Lamps sold separately.
AVAILABLE FINISHES
AZT
Textured
Architectural
Bronze
BKT
Textured
Black
12V Textured Bollard Path Light
DIMENSIONS
18123
5.5"
27"
PHOTOMETRICS
Distance from Light
Footcandles
0’
4"
1’
8.5
2.7
2’ 3’ 4’ 5’ 6’ 7’ 8’
1 0.35 0.15
0.1 0.05 0.03 0.01
15848
RECOMMENDED LED LAMPS* (sold separately)
18122 1.5W, 2.4VA, 2700K, 130 lumnes, 120° Beam
18123
18202
1.5W, 2.4VA, 3000K, 130 lumnes, 120° Beam
2.3W, 3.3VA, 2700K, 215 lumnes, 300° Beam
18203 2.3W, 3.3VA, 3000K, 215 lumnes, 300° Beam
* Power usage at 12V AC Input
INSTALLATION
INFORMATION
TROUBLESHOOTING
Fixture does not illuminate
Fixture turns off
Fixture trips breaker
Power (W)
0-20
40
60
80
100
>100
10
1860/567
930/283
620/189
470/143
370/113
Wire Gauge / Length / (ft/m) Load Chart
12 14
1150/351 730/223
580/177
390/119
370/113
240/73
290/88 180/55
230/70 140/43
Consult Technical Support
16
450/137
230/70
150/46
110/34
90/27
Verify power connections. Review installation guide for installation problem. Insure manual reset breaker has not been tripped.
Verify power connections. Review installation guide for installation problems. Insure manual reset breaker has not been tripped. Check voltage drop at fixture.
Check installation for a possible short or overload state. Isolate the identified short and replace affected fixture or remove fixture(s) installed in overload.
LISTING
UL 1838 Issued: 2003/01/13 Ed: 3 Rev: 2015/01/13 Low Voltage Landscape Lighting Systems.
CSA C22.2#250.7 Issued: 2007/11/01 (R2012)
Ed: 1 Extra-low-voltage landscape lighting systems – General Instruction No. 1: 2008.
Contact: [email protected]
1.
Actual efficacy value can be calculated as follows: Lumen value divided by average power consumption.
2.
Do not extend beyond the recommended maximum run length.
3.
Recommend product be installed with 10 or 12 gauge wire.
4.
Recommend 80% load/20% overhead rule for fixture load planning in reference to the power source. Calculating fixture loading this way provides additional resource for fixture adjustment and loss due to voltage drop due to wire run lengths.
5.
We reserve the right to modify and improve the design of our fixtures without prior notice. We cannot guarantee to match existing installed fixtures for subsequent orders or replacements in regards to product appearance, CCT, or lumen output.
6.
Do not modify product beyond instructions or warranty will be void.
WARRANTY
See Kichler.com/Warranty for warranty details.
Consult Kichler Advanced Product Solutions for additional support at 844-452-5437.
© 2019 Kichler Lighting LLC. All Rights Reserved.
LD18047
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement