advertisement
DISTRIBUTED AUDIO SERIES 2
IW82 IN-WALL 8" OPEN BACK SPEAKER
Triad’s IW82 speaker offers homeowners the refined, musical quality of Triad speakers for their whole home.
This speaker is built around reinforced poly-mica woofers for superior bass and aimable Tetoron-dome tweeters for a full, natural sound.
Pivoting tweeter
With up to 10 degrees of movement, the pivoting tweeter delivers high-quality audio to the listener’s position and offers flexible installation options.
Poly-mica woofer
Mica-infused polypropylene offers a strengthened cone material with increased rigidity and a high stiffnessto-weight ratio—while still maintaining the dampening properties of a traditional polypropylene woofer.
Voice matched
All Distributed Audio Series 2 speakers are voice matched—allowing homeowners to mix and match speakers within the series to meet the needs of each room, while providing identical tonal qualities throughout the home.
Magnetic mounting
Low-profile frameless grills attach to the speaker with hidden neodymium magnets for fast installation and a snug fit. Custom paint-matching is available.
Easy install
Using a tried-and-tested traditional Triad mounting system with reinforced threaded brass inserts,
Distributed Audio Series speakers install in seconds and will stay snug to the mounting surface for the life of the system.
Copyright ©2019, Control4 Corporation. All rights reserved. Control4, Triad, and the Triad logo are registered trademarks or trademarks of Control4 Corporation or its subsidiaries in the United States and/or other countries. All other names and brands may be claimed as the property of their respective owners. All specifications subject to change without notice.
COMPONENTS
Tweeter size
Tweeter type
Woofer size
Woofer type
1" (28 mm)
Tetoron® dome
8" (203 mm)
Poly-mica
PERFORMANCE
Maximum power 125W
Recommended amp power 5 - 125W
Maximum SPL
Impedance (nominal)
Impedance (minimum)
110 dB
8 ohm
4.5 ohm
Sensitivity (dB @ 2.83V, 1 m)
Frequency response (+/-3 dB)
Dispersion (8K/-6dB)
89 dB
46 Hz - 22 kHz
95° H × 90° V
DIMENSIONS
Cabinet specifications
(H × W × D)
Hole cut out
(H × W)
Frameless grill dimensions
(H × W)
15
15
/
16
× 9
15
/
16
× 3
7
/
16
"
(40.4 × 25.3 × 8.6 cm)
14 13 /
16
× 8 7 /
8
"
(37.6 × 22.5 cm)
16 1 /
16
× 10 1 /
16
"
(40.7 × 25.6 cm)
Mounting depth 3 1 /
4
" (8.3 cm)
Product weight (each) 5.1 lb (2.32 kg)
Grill material
New construction bracket size
Metal Perf-Frameless
NCBIW8
PRODUCT NUMBERS
Speaker
Replacement grill
New construction bracket
TS-IW82
TS-GRLIW8
TS-NCBIW8
201-04782-A
2019-04-30 LW
TRIADAUDIO.COM | PORTLAND, OR
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement