Data Sheet

FH Cabinets

Application

Ordering

Design

The FH cabinets are basically used for covering manifold installations in floor heated buildings and rooms.

The cabinets can be used together with Danfoss

FHF and FBH manifold systems and FH-MJA shunts.

The cabinet can be used for:

• Complete installation (as in picture)

• Manifold with shunt

• Manifold alone

Shunts are supplied with dampers and screws, which should be used for mounting.

FHF brackets should be used for mounting of manifolds.

Only the cabinet size has to be chosen from the application wanted.

Type Description

FH-FCA Cabinet Flush mounted, white painted

FH-FCB Cabinet Flush mounted, white painted

FH-FCC Cabinet Flush mounted, white painted

FH-FCD Cabinet Flush mounted, white painted

FH SCA Cabinet Surface mounted, white painted

FH-SCB Cabinet Surface mounted, white painted

FH-SCC Cabinet Surface mounted, white painted

FH-SCD Cabinet Surface mounted, white painted

Width

450 mm

680 mm

830 mm

1130 mm

450 mm

680 mm

830 mm

1030 mm

Code no.

088X0400

088X0401

088X0402

088X0403

088X0410

088X0411

088X0412

088X0413

The FH Cabinets are available as

• surface mounted cabinets, which are mounted with fasteners directly upon a wall.

• flush mounted, which must be mounted into a wall opening.

The cabinets FH-FCA/B/C/D and FH-SCA/B/C/D are powder painted and made from Zink-plated steel plate. The cabinet front door is made from a white polymer plate, which give a mat finish and easy to clean surface.

1

VDFEA302 © Danfoss 02/2015

Data Sheet

Dimensions

FH Cabinets

25

B 130

Surface mounted cabinets

30

B

30

110

30

50 x 80

50

Flush mounted cabinets

Flush mounted cabinets need a build-in hole, which is about 5 mm larger than the B measure and 600 mm above floor surface.

Flush mounted cabinets are adjustable in depth from 110 mm to 170 mm.

2 VDFEA302 © Danfoss 02/2015